#1 Le 11/05/2017, à 13:09
- Mimali
reinstall win8 depuis ubuntu
Bonjour,
j'ai lu de nombreux topic et tuto sur le sujet, mais je suis clairement noyée dans le flot d'informations, de manipulation...propre à des cas particuliers. J'espere donc ne pas faire de doublon inutilement.
Mon pc sous win8 à planté au demarrage. Mon HDD etant illisible et windows ne voulant plus demarrer, j'ai utilisé ubuntu en live usb afin d'essayer de recuperer mes données (malgré toutes les demarches qu'on m'a conseillé, rien ne fonctionne, le HDD n'est meme pas detecté).
Tombée sous le charme de linux, j'ai decidé de l'installer sur ma machine (quel bonheur de ne pas avoir de bugs toutes les 4 secondes).
Neanmoins, avant d'ecraser mes partitions en vu d'installer ubuntu definitivement, je souhaiterai tester une derniere tentative de recuperation de mes données (qui, je pense, sont passées en RAW) sous windows.
Pour se faire, il faudrai que je repare win8 en créant une clé bootable avec l'iso de win8. Mais je n'y parviens pas, il y'a des choses que je n'ose pas faire, peur de mal faire (meme si les tutos sont assez clair).
Quelqu'un aurai t il la bonté de me guider dans ma demarche, car je suis un peu paumée (plus facile de passer de win8 vers ubuntu, que l'inverse), sachant que la plupart des tutos parle de 7 et 10 mais pas du tout de win8, systeme pour lequel j'ai une clé d'activation (recuperé grace un logiciel car oem)
Par avance un grand merci.
Hors ligne
#2 Le 12/05/2017, à 09:45
- Caribou22
Re : reinstall win8 depuis ubuntu
Bonjour et bienvenue
Le HDD Windows n'apparaît même pas dans l'explorateur de fichiers ?
Depuis une session live de Ubuntu, je te prie de faire un rapport Bisnext
Dernière modification par Caribou22 (Le 12/05/2017, à 09:46)
Hors ligne
#3 Le 12/05/2017, à 10:51
- Mimali
Re : reinstall win8 depuis ubuntu
Bonjour
Effectivement, le HDD n'est pas reconnu, on a tout essayé ces 2 derniere semaines sur le forum. Donc, c'est sans certitude, mais je souhaite faire une derniere tentative sous windows
May 12 2017, bisnext report id bbcdd also available at https://paste.debian.net/932106/
bisnext 0.02
============================ Hardware and System Summary ======================
System: Kernel: 4.4.0-31-generic x86_64 (64 bit gcc: 5.3.1)
Desktop: N/A dm: lightdm Distro: Ubuntu 16.04.1 LTS
Machine: Device: laptop System: TOSHIBA product: SATELLITE NB10-A-103 v: PU141E-00K01FFR
Mobo: TOSHIBA model: MA10 UEFI: TOSHIBA v: 1.00 date: 10/30/2013
Chassis: type: 10
Battery BAT0: charge: 9.3 Wh 100.4% condition: 9.3/24.8 Wh (37%)
volts: 12.1/10.8
model: PEGA G71C000GN110 status: Discharging
CPU: Dual core Intel Celeron N2810 (-MCP-) cache: 1024 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 7992
clock speeds: min/max: 533/1999 MHz 1: 807 MHz 2: 976 MHz
Memory: Array-1 capacity: 64 GB (check) devices: 2 EC: None
Device-1: A1_DIMM0 size: 4 GB speed: 1066 MHz type: DDR3
manufacturer: Samsung part: M471B5173QH0-YK0
Device-2: A1_DIMM1 size: No Module Installed type: N/A
Graphics: Card: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display
bus-ID: 00:02.0 chip-ID: 8086:0f31
Display Server: X.Org 1.18.3 drivers: intel (unloaded: modesetting,fbdev,vesa)
tty size: 1366x768@60.07hz
GLX Renderer: Mesa DRI Intel Bay Trail
GLX Version: 3.0 Mesa 11.2.0 Direct Rendering: Yes
Audio: Card Intel Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:0f04
Sound: Advanced Linux Sound Architecture v: k4.4.0-31-generic
Network: Card-1: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter
driver: ath9k bus-ID: 02:00.0 chip-ID: 168c:0036
IF: wlp2s0 state: up mac: <filter>
Card-2: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
driver: r8169 v: 2.3LK-NAPI port: e000
bus-ID: 03:00.0 chip-ID: 10ec:8136
IF: enp3s0 state: down mac: <filter>
Drives: HDD Total Size: 4.0GB (38.6% used)
ID-1: USB /dev/sdb model: USB_Flash_Memory size: 4.0GB
Optical: No optical drives detected.
Partition: ID-1: /cdrom size: 3.8G used: 1.5G (39%) fs: vfat dev: /dev/sdb1
label: MIMI uuid: AE89-F804
ID-2: / size: 1.9G used: 235M (13%) fs: overlay dev: /dev/cow
label: N/A uuid: N/A
RAID: System: supported: N/A
No RAID devices: /proc/mdstat, md_mod kernel module present
Unused Devices: none
Unmounted: ID-1: /dev/ram0 size: 0.07G label: N/A uuid: N/A
ID-2: /dev/ram1 size: 0.07G label: N/A uuid: N/A
ID-3: /dev/ram2 size: 0.07G label: N/A uuid: N/A
ID-4: /dev/ram3 size: 0.07G label: N/A uuid: N/A
ID-5: /dev/ram4 size: 0.07G label: N/A uuid: N/A
ID-6: /dev/ram5 size: 0.07G label: N/A uuid: N/A
ID-7: /dev/ram6 size: 0.07G label: N/A uuid: N/A
ID-8: /dev/ram7 size: 0.07G label: N/A uuid: N/A
ID-9: /dev/ram8 size: 0.07G label: N/A uuid: N/A
ID-10: /dev/ram9 size: 0.07G label: N/A uuid: N/A
ID-11: /dev/ram10 size: 0.07G label: N/A uuid: N/A
ID-12: /dev/ram11 size: 0.07G label: N/A uuid: N/A
ID-13: /dev/ram12 size: 0.07G label: N/A uuid: N/A
ID-14: /dev/ram13 size: 0.07G label: N/A uuid: N/A
ID-15: /dev/ram14 size: 0.07G label: N/A uuid: N/A
ID-16: /dev/ram15 size: 0.07G label: N/A uuid: N/A
Sensors: None detected - is lm-sensors installed and configured?
Repos: Active apt sources in file: /etc/apt/sources.list
deb cdrom:[Ubuntu 16.04.1 LTS _Xenial Xerus_ - Release amd64 (20160719)]/ xenial main restricted universe multiverse
deb http://archive.ubuntu.com/ubuntu/ xenial main restricted universe multiverse
deb http://security.ubuntu.com/ubuntu/ xenial-security main restricted universe multiverse
deb http://archive.ubuntu.com/ubuntu/ xenial-updates main restricted universe multiverse
Processes: CPU: % used - Memory: MB / % used - top 10 active
1: cpu: 33.8% command: firefox pid: 4999 mem: 627.23MB (16.4%)
2: cpu: 1.0% command: bash pid: 8128 mem: 4.37MB (0.1%)
3: cpu: 0.7% command: compiz pid: 4115 mem: 95.13MB (2.5%)
4: cpu: 0.7% command: Xorg pid: 2969 mem: 56.36MB (1.4%)
5: cpu: 0.2% command: sudo pid: 8127 mem: 4.42MB (0.1%)
6: cpu: 0.2% command: init pid: 1 mem: 5.97MB (0.1%)
7: cpu: 0.1% daemon: ~kworker/u4:1~ pid: 5706 mem: 0.00MB (0.0%)
8: cpu: 0.1% command: gnome-terminal-server pid: 5260 mem: 36.14MB (0.9%)
9: cpu: 0.1% command: nm-applet pid: 4306 mem: 53.45MB (1.4%)
10: cpu: 0.0% command: sed pid: 8185 mem: 1.03MB (0.0%)
Memory: MB / % used - CPU: % used - top 10 active
1: mem: 627.23MB (16.4%) command: firefox pid: 4999 cpu: 33.8%
2: mem: 95.13MB (2.5%) command: compiz pid: 4115 cpu: 0.7%
3: mem: 58.39MB (1.5%) command: evolution-calendar-factory pid: 4297 cpu: 0.0%
4: mem: 56.36MB (1.4%) command: Xorg pid: 2969 cpu: 0.7%
5: mem: 53.45MB (1.4%) command: nm-applet pid: 4306 cpu: 0.1%
6: mem: 52.37MB (1.3%) command: evolution-calendar-factory-subprocess pid: 4402 cpu: 0.0%
7: mem: 50.87MB (1.3%) command: evolution-calendar-factory-subprocess pid: 4393 cpu: 0.0%
8: mem: 43.41MB (1.1%) command: nautilus pid: 4304 cpu: 0.0%
9: mem: 36.14MB (0.9%) command: gnome-terminal-server pid: 5260 cpu: 0.1%
10: mem: 34.35MB (0.9%) command: hud-service pid: 4093 cpu: 0.0%
Info: Processes: 204 Uptime: 1:37 Memory: 1114.6/3803.8MB
Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
Client: Shell (bash 4.3.461 running in bash) inxi: 2.3.8
_______________________________ UEFI settings _________________________________
Computer booted in UEFI mode for this session.
BootCurrent: 000F
Timeout: 3 seconds
BootOrder: 2003,2001
Boot0001* UEFI: IP4 Realtek PCIe FE Family Controller PciRoot(0x0)/Pci(0x1c,0x2)/Pci(0x0,0x0)/MAC(0c54a53cc4fd,0)/IPv4(0.0.0.0:0<->0.0.0.0:0,0,0)..BO
Boot0002* UEFI: IP6 Realtek PCIe FE Family Controller PciRoot(0x0)/Pci(0x1c,0x2)/Pci(0x0,0x0)/MAC(0c54a53cc4fd,0)/IPv6([::]:<->[::]:,0,0)..BO
Boot0004* UEFI: IP6 Realtek PCIe FE Family Controller PciRoot(0x0)/Pci(0x1c,0x2)/Pci(0x0,0x0)/MAC(0c54a53cc4fd,0)/IPv6([::]:<->[::]:,0,0)..BO
Boot0008* UEFI: IP6 Realtek PCIe FE Family Controller PciRoot(0x0)/Pci(0x1c,0x2)/Pci(0x0,0x0)/MAC(0c54a53cc4fd,0)/IPv6([::]:<->[::]:,0,0)..BO
Boot000B* UEFI: IP6 Realtek PCIe FE Family Controller PciRoot(0x0)/Pci(0x1c,0x2)/Pci(0x0,0x0)/MAC(0c54a53cc4fd,0)/IPv6([::]:<->[::]:,0,0)..BO
Boot000C* UEFI: IP6 Realtek PCIe FE Family Controller PciRoot(0x0)/Pci(0x1c,0x2)/Pci(0x0,0x0)/MAC(0c54a53cc4fd,0)/IPv6([::]:<->[::]:,0,0)..BO
Boot000D* UEFI: IP4 Realtek PCIe FE Family Controller PciRoot(0x0)/Pci(0x1c,0x2)/Pci(0x0,0x0)/MAC(0c54a53cc4fd,0)/IPv4(0.0.0.0:0<->0.0.0.0:0,0,0)..BO
Boot000E* UEFI: IP6 Realtek PCIe FE Family Controller PciRoot(0x0)/Pci(0x1c,0x2)/Pci(0x0,0x0)/MAC(0c54a53cc4fd,0)/IPv6([::]:<->[::]:,0,0)..BO
Boot000F* UEFI: USB Flash MemoryPMAP PciRoot(0x0)/Pci(0x14,0x0)/USB(2,0)/USB(2,0)/HD(1,MBR,0x4294967220,0x800,0x776800)..BO
Boot2001* EFI USB Device RC
Boot2003* EFI Network RC
vfat partitions details:
/dev/sdb1: LABEL="MIMI" UUID="AE89-F804" TYPE="vfat" PARTUUID="009f63b4-01"
__________________________________ Secure Boot ________________________________
Secure Boot disabled or not available on this system.
========================= Boot Information Details ============================
=> Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdb.
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.03 2010-10-22 ........>..sr>..........8...0...~.....~...f...M.f.f....f..0~....>E}.u......
Boot sector info: Syslinux looks at sector 7373432 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /EFI/BOOT/BOOTx64.EFI
/EFI/BOOT/grubx64.efi /casper/vmlinuz.efi
/ldlinux.sys
_________________________=== Drive/Partition Info ===__________________________
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 3.8 GiB, 4007657472 bytes, 7827456 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 7,827,455 7,825,408 b W95 FAT32
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sdb1 AE89-F804 vfat MIMI
_________________________ "ls -l /dev/disk/by_id" output ______________________
total 0
lrwxrwxrwx 1 root root 9 May 12 07:17 usb-Multiple_Card_Reader_058F63666485-0:0 -> ../../sda
lrwxrwxrwx 1 root root 9 May 12 07:17 usb-_USB_Flash_Memory_000AEB5DB7B7B921430D0334-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 May 12 07:17 usb-_USB_Flash_Memory_000AEB5DB7B7B921430D0334-0:0-part1 -> ../../sdb1
________________________________ Mount points _________________________________
Device Mount_Point Type Options
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 /rofs squashfs (ro,noatime)
__________________________=== Boot Files Content ===___________________________
___________________________ sdb1/boot/grub/grub.cfg: ___________________________
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash ---
initrd /casper/initrd.lz
}
_________ Devices which don't seem to have a corresponding hard drive: _________
sda sdc
===============================================================================
Running System Information
===============================================================================
______________________________ Kernel parameters ______________________________
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
______________________________ Boot-up Statistics ______________________________
Startup finished in 18.459s (firmware) + 8.937s (loader) + 7min 29.705s (kernel) + 3.651s (userspace) = 8min 752ms
blame, first 10:
dev-loop0.device 5.018s
dev-sdb1.device 4.489s
networking.service 1.684s
ModemManager.service 1.611s
accounts-daemon.service 1.472s
thermald.service 1.386s
systemd-logind.service 1.270s
console-setup.service 1.220s
grub-common.service 1.048s
irqbalance.service 1.021s
critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
1 graphical.target @3.567s
2 multi-user.target @3.557s
3 getty.target @3.554s
4 getty@tty1.service @3.546s
5 rc-local.service @3.431s +28ms
6 network.target @3.412s
7 networking.service @1.727s +1.684s
8 apparmor.service @1.286s +305ms
9 local-fs.target @1.284s
10 tmp.mount @1.275s +8ms
11 local-fs-pre.target @1.258s
12 lvm2-monitor.service @342ms +915ms
13 lvm2-lvmetad.service @652ms
14 lvm2-lvmetad.socket @332ms
15 -.slice @264ms
_________________________ RAM usage & Free disk space _________________________
total used free shared buff/cache available
Mem: 3.7G 1.0G 1.1G 400M 1.6G 2.1G
Swap: 0B 0B 0B
Swappiness = 60
Filesystem Mounted on Type Size Used Avail Use% IUse%
/cow / overlay 1.9G 235M 1.7G 13% 1%
/dev/loop0 /rofs squashfs 1.4G 1.4G 0 100% 100%
/dev/sdb1 /cdrom vfat 3.8G 1.5G 2.3G 39% -
_________________________________ USB devices __________________________________
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 007: ID 0930:0220 Toshiba Corp.
Bus 001 Device 003: ID 04f2:b3b1 Chicony Electronics Co., Ltd
Bus 001 Device 006: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 001 Device 004: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 102/2.0 / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick
Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 480M
|__ Port 2: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 2: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 3: Dev 6, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 3: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 3: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M
|__ Port 4: Dev 7, If 0, Class=Wireless, Driver=btusb, 12M
|__ Port 4: Dev 7, If 1, Class=Wireless, Driver=btusb, 12M
_______________________________ Wireless Status _______________________________
0: Toshiba Bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
2: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
___________________________________ Modules Loaded ____________________________
Module Size Used by
8250_dw 16384 0
8250_fintek 16384 0
ac97_bus 16384 1 snd_soc_core
ahci 36864 0
ansi_cprng 16384 0
arc4 16384 2
ath 32768 3 ath9k_common,ath9k,ath9k_hw
ath3k 20480 0
ath9k 143360 0
ath9k_common 36864 1 ath9k
ath9k_hw 466944 2 ath9k_common,ath9k
autofs4 40960 2
bluetooth 520192 30 bnep,ath3k,btbcm,btrtl,btusb,rfcomm,btintel
bnep 20480 2
btbcm 16384 1 btusb
btintel 16384 1 btusb
btrfs 987136 0
btrtl 16384 1 btusb
btusb 45056 0
ccm 20480 1
cfg80211 565248 4 ath,ath9k_common,ath9k,mac80211
coretemp 16384 0
crc32_pclmul 16384 0
crct10dif_pclmul 16384 0
cryptd 20480 0
ctr 16384 1
dm_log 20480 2 dm_region_hash,dm_mirror
dm_mirror 24576 0
dm_region_hash 24576 1 dm_mirror
drbg 32768 1
drm 360448 6 i915,drm_kms_helper
drm_kms_helper 147456 1 i915
dw_dmac 16384 0
dw_dmac_core 24576 1 dw_dmac
fb_sys_fops 16384 1 drm_kms_helper
fjes 28672 0
hfs 57344 0
hfsplus 106496 0
hid 118784 1 i2c_hid
i2c_algo_bit 16384 1 i915
i2c_designware_core 20480 1 i2c_designware_platform
i2c_designware_platform 16384 0
i2c_hid 20480 0
i915 1208320 5
input_leds 16384 0
intel_powerclamp 16384 0
intel_rapl 20480 0
intel_soc_dts_iosf 16384 0
irqbypass 16384 1 kvm
jfs 180224 0
joydev 20480 0
kvm 536576 0
libahci 32768 1 ahci
libcrc32c 16384 1 xfs
lp 20480 0
lpc_ich 24576 0
mac80211 737280 1 ath9k
mac_hid 16384 0
media 24576 2 uvcvideo,videodev
mei 98304 1 mei_txe
mei_txe 20480 0
mii 16384 1 r8169
minix 36864 0
msdos 20480 0
nls_iso8859_1 16384 1
ntfs 98304 0
overlay 49152 1
parport 49152 3 lp,ppdev,parport_pc
parport_pc 32768 0
ppdev 20480 0
psmouse 126976 0
punit_atom_debug 16384 0
pwm_lpss 16384 1 pwm_lpss_platform
pwm_lpss_platform 16384 0
qnx4 16384 0
r8169 81920 0
raid6_pq 102400 1 btrfs
rfcomm 69632 2
rfkill_gpio 16384 0
sdhci 45056 1 sdhci_acpi
sdhci_acpi 16384 0
serio_raw 16384 0
shpchp 36864 0
snd 81920 20 snd_hda_codec_realtek,snd_soc_core,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_soc_sst_mfld_platform,snd_seq_device,snd_compress
snd_compress 20480 1 snd_soc_core
snd_hda_codec 135168 4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_hda_codec_generic 77824 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 53248 1
snd_hda_codec_realtek 86016 1
snd_hda_core 73728 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
snd_hda_intel 36864 3
snd_hwdep 16384 1 snd_hda_codec
snd_intel_sst_acpi 16384 0
snd_intel_sst_core 73728 1 snd_intel_sst_acpi
snd_pcm 106496 8 snd_soc_rt5640,snd_soc_core,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_soc_sst_mfld_platform,snd_pcm_dmaengine,snd_hda_core
snd_pcm_dmaengine 16384 1 snd_soc_core
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 69632 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
snd_soc_core 212992 2 snd_soc_rt5640,snd_soc_sst_mfld_platform
snd_soc_rl6231 16384 1 snd_soc_rt5640
snd_soc_rt5640 114688 0
snd_soc_sst_acpi 16384 0
snd_soc_sst_mfld_platform 90112 1 snd_intel_sst_core
snd_timer 32768 2 snd_pcm,snd_seq
soundcore 16384 1 snd
sparse_keymap 16384 2 toshiba_wmi,toshiba_acpi
spi_pxa2xx_platform 24576 0
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
toshiba_acpi 40960 0
toshiba_bluetooth 16384 0
toshiba_wmi 16384 0
uas 24576 0
ufs 73728 0
usb_storage 69632 2 uas
uvcvideo 90112 0
v4l2_common 16384 1 videobuf2_v4l2
video 40960 2 i915,toshiba_acpi
videobuf2_core 36864 2 uvcvideo,videobuf2_v4l2
videobuf2_memops 16384 1 videobuf2_vmalloc
videobuf2_v4l2 28672 1 uvcvideo
videobuf2_vmalloc 16384 1 uvcvideo
videodev 176128 4 uvcvideo,v4l2_common,videobuf2_core,videobuf2_v4l2
wmi 20480 2 toshiba_wmi,toshiba_acpi
xfs 970752 0
xor 24576 1 btrfs
______________________________ Additional Drivers _____________________________
== cpu-microcode.py ==
driver : intel-microcode - distro non-free
__________________________________ Locales ___________________________________
locale command output:
LANG=en_US.UTF-8
LANGUAGE=
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
/etc/default/locale:
LANG="en_US.UTF-8"
Active keyboard layout:
rules: evdev
model: pc105
layout: fr
Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="us"
XKBVARIANT=""
XKBOPTIONS=""
BACKSPACE="guess"
_____________________________ Upgradable Packages _____________________________
Live Session
________________________ Package Configuration Pending ________________________
None
__________________________ Package Installation Pending _______________________
Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 461 not upgraded.
_________________________ Kernel Packages Installed __________________________
Package Version
linux-generic 4.4.0.31.33
linux-headers-4.4.0-31 4.4.0-31.50
linux-headers-4.4.0-31-generic 4.4.0-31.50
linux-headers-generic 4.4.0.31.33
linux-image-4.4.0-31-generic 4.4.0-31.50
linux-image-extra-4.4.0-31-generic 4.4.0-31.50
linux-image-generic 4.4.0.31.33
linux-signed-generic 4.4.0.31.33
linux-signed-image-4.4.0-31-generic 4.4.0-31.50
linux-signed-image-generic 4.4.0.31.33
File list in /boot directory:
abi-4.4.0-31-generic
config-4.4.0-31-generic
grub
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.4.0-31-generic
_________________________________ System Logs ________________________________
Failed services:
UNIT LOAD ACTIVE SUB DESCRIPTION
● smartd.service loaded failed failed Self Monitoring and Reporting Technology (SMART) Daemon
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
1 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Selection of relevent log entries:
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ESRT=0xb7a02398 ACPI 2.0=0xb69ad000 ACPI=0xb69ad000 SMBIOS=0xb743ad98 MPS=0xb743ba18
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20150930/tbfadt-623)
[ 0.000000] ACPI: UEFI 0x00000000B69C8468 000042 (v01 TOSASU TOSASU00 00000000 00000000)
[ 0.193451] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.193461] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.201023] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] not reserved in ACPI motherboard resources
[ 0.201035] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.308076] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.339175] ACPI : EC: GPE = 0x14, I/O: command/status = 0x66, data = 0x62
[ 0.339953] SCSI subsystem initialized
[ 9.553104] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 9.554057] efifb: probing for efifb
[ 9.554083] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90000800000, using 1920k, total 1920k
[ 9.554087] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 9.554089] efifb: scrolling: redraw
[ 9.554092] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 9.560318] fb0: EFI VGA frame buffer device
[ 9.610658] EFI Variables Facility v0.08 2004-May-17
[ 10.032937] scsi host0: ahci
[ 10.038175] scsi host1: ahci
[ 10.067124] r8169 0000:03:00.0 (unnamed net_device) (uninitialized): rtl_chipcmd_cond == 1 (loop: 100, delay: 100).
[ 10.203219] fb: switching to inteldrmfb from EFI VGA
[ 10.918881] scsi host2: usb-storage 1-2.2:1.0
[ 10.919768] scsi host3: usb-storage 1-2.3:1.0
[ 11.918449] scsi 2:0:0:0: Direct-Access USB Flash Memory PMAP PQ: 0 ANSI: 0 CCS
[ 11.918714] scsi 3:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 4
[ 11.919726] sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 11.921918] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 11.924077] sd 3:0:0:0: [sda] Attached SCSI removable disk
[ 11.924116] sd 2:0:0:0: [sdb] 7827456 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 11.929192] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 20.053877] ata1: COMRESET failed (errno=-16)
[ 30.071891] ata1: COMRESET failed (errno=-16)
[ 62.576389] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 62.610024] ata1.00: failed to read native max address (err_mask=0x1)
[ 62.650995] ata1.00: configured for UDMA/100 (device error ignored)
[ 62.656696] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABF0 3M PQ: 0 ANSI: 5
[ 62.657064] sd 0:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 62.657143] sd 0:0:0:0: Attached scsi generic sg2 type 0
[ 62.680731] ata1.00: exception Emask 0x1 SAct 0x800000 SErr 0x0 action 0x6
[ 62.680848] ata1.00: failed command: READ FPDMA QUEUED
[ 62.680907] ata1.00: cmd 60/08:b8:00:00:00/00:00:00:00:00/40 tag 23 ncq 4096 in
[ 62.681054] ata1.00: status: { ERR }
[ 62.681093] ata1.00: error: { ABRT }
[ 62.681136] ata1: hard resetting link
[ 72.706505] ata1: COMRESET failed (errno=-16)
[ 72.706559] ata1: hard resetting link
[ 82.732525] ata1: COMRESET failed (errno=-16)
[ 82.732576] ata1: hard resetting link
[ 115.293079] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 115.348467] ata1.00: configured for UDMA/100 (device error ignored)
[ 115.373358] ata1.00: NCQ disabled due to excessive errors
[ 115.373363] ata1.00: exception Emask 0x1 SAct 0x2000000 SErr 0x0 action 0x6
[ 115.373479] ata1.00: failed command: READ FPDMA QUEUED
[ 115.373537] ata1.00: cmd 60/08:c8:00:00:00/00:00:00:00:00/40 tag 25 ncq 4096 in
[ 115.373686] ata1.00: status: { ERR }
[ 115.373725] ata1.00: error: { ABRT }
[ 115.373767] ata1: hard resetting link
[ 125.399172] ata1: COMRESET failed (errno=-16)
[ 125.399225] ata1: hard resetting link
[ 135.425196] ata1: COMRESET failed (errno=-16)
[ 135.425255] ata1: hard resetting link
[ 167.977740] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 168.033045] ata1.00: configured for UDMA/100 (device error ignored)
[ 199.092853] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 199.092933] ata1.00: failed command: READ DMA
[ 199.092984] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 4 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 199.093126] ata1.00: status: { DRDY }
[ 199.093168] ata1: hard resetting link
[ 209.118851] ata1: COMRESET failed (errno=-16)
[ 209.118902] ata1: hard resetting link
[ 219.144873] ata1: COMRESET failed (errno=-16)
[ 219.144925] ata1: hard resetting link
[ 240.406263] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.406354] Workqueue: events ata_scsi_dev_rescan
[ 240.406419] [<ffffffff815b9d79>] scsi_rescan_device+0x49/0x70
[ 240.406423] [<ffffffff815dc77d>] ata_scsi_dev_rescan+0xbd/0x120
[ 240.406602] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.406885] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.407165] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 240.407279] [<ffffffff8182cb45>] schedule_timeout+0x1b5/0x270
[ 240.407294] [<ffffffff81828f54>] io_schedule_timeout+0xa4/0x110
[ 240.407342] [<ffffffff813dc0d2>] efi_partition+0xf2/0x7d0
[ 251.649378] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 251.704527] ata1.00: configured for UDMA/100 (device error ignored)
[ 282.119850] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 282.122017] ata1.00: failed command: READ DMA
[ 282.124145] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 5 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 282.128379] ata1.00: status: { DRDY }
[ 282.130455] ata1: hard resetting link
[ 292.145839] ata1: COMRESET failed (errno=-16)
[ 292.147919] ata1: hard resetting link
[ 302.171861] ata1: COMRESET failed (errno=-16)
[ 302.173900] ata1: hard resetting link
[ 334.620304] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 334.675540] ata1.00: failed to set xfermode (err_mask=0x1)
[ 339.625296] ata1: hard resetting link
[ 349.651316] ata1: COMRESET failed (errno=-16)
[ 349.653399] ata1: hard resetting link
[ 359.677338] ata1: COMRESET failed (errno=-16)
[ 359.679375] ata1: hard resetting link
[ 360.530367] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 360.532499] Workqueue: events ata_scsi_dev_rescan
[ 360.532561] [<ffffffff815b9d79>] scsi_rescan_device+0x49/0x70
[ 360.532566] [<ffffffff815dc77d>] ata_scsi_dev_rescan+0xbd/0x120
[ 360.536883] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 360.543596] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 360.550533] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 360.552906] [<ffffffff8182cb45>] schedule_timeout+0x1b5/0x270
[ 360.552920] [<ffffffff81828f54>] io_schedule_timeout+0xa4/0x110
[ 360.552968] [<ffffffff813dc0d2>] efi_partition+0xf2/0x7d0
[ 392.125784] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 392.181115] ata1.00: failed to set xfermode (err_mask=0x1)
[ 397.130776] ata1: hard resetting link
[ 407.156795] ata1: COMRESET failed (errno=-16)
[ 407.159125] ata1: hard resetting link
[ 417.182816] ata1: COMRESET failed (errno=-16)
[ 417.185084] ata1: hard resetting link
[ 449.575202] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 449.629368] ata1.00: failed to set xfermode (err_mask=0x1)
[ 449.647310] sd 0:0:0:0: [sdc] tag#6 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 449.647321] blk_update_request: I/O error, dev sdc, sector 0
[ 449.649644] Buffer I/O error on dev sdc, logical block 0, async page read
[ 449.652088] sd 0:0:0:0: [sdc] tag#7 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 449.652099] blk_update_request: I/O error, dev sdc, sector 0
[ 449.654457] Buffer I/O error on dev sdc, logical block 0, async page read
[ 449.656873] sd 0:0:0:0: [sdc] tag#8 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 449.656883] blk_update_request: I/O error, dev sdc, sector 0
[ 449.659259] Buffer I/O error on dev sdc, logical block 0, async page read
[ 449.661687] ldm_validate_partition_table(): Disk read failed.
[ 449.661714] sd 0:0:0:0: [sdc] tag#9 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 449.661724] blk_update_request: I/O error, dev sdc, sector 0
[ 449.664118] Buffer I/O error on dev sdc, logical block 0, async page read
[ 449.666567] sd 0:0:0:0: [sdc] tag#10 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 449.666577] blk_update_request: I/O error, dev sdc, sector 0
[ 449.669044] Buffer I/O error on dev sdc, logical block 0, async page read
[ 449.671553] sd 0:0:0:0: [sdc] tag#11 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 449.671563] blk_update_request: I/O error, dev sdc, sector 0
[ 449.674014] Buffer I/O error on dev sdc, logical block 0, async page read
[ 449.676508] sd 0:0:0:0: [sdc] tag#12 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 449.676517] blk_update_request: I/O error, dev sdc, sector 0
[ 449.678959] Buffer I/O error on dev sdc, logical block 0, async page read
[ 449.683875] sd 0:0:0:0: [sdc] tag#13 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 449.683885] blk_update_request: I/O error, dev sdc, sector 0
[ 449.686294] Buffer I/O error on dev sdc, logical block 0, async page read
[ 449.688750] sd 0:0:0:0: [sdc] tag#14 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 449.688759] blk_update_request: I/O error, dev sdc, sector 0
[ 449.691172] Buffer I/O error on dev sdc, logical block 0, async page read
[ 449.693637] sd 0:0:0:0: [sdc] tag#15 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 449.693646] blk_update_request: I/O error, dev sdc, sector 24
[ 449.696046] Buffer I/O error on dev sdc, logical block 3, async page read
[ 449.698786] sd 0:0:0:0: [sdc] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 449.698855] sd 0:0:0:0: [sdc] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
[ 449.698960] sd 0:0:0:0: [sdc] Attached SCSI disk
[ 460.414045] usb 1-4: device descriptor read/64, error -110
[ 746.945098] wlp2s0: RX AssocResp from 68:a3:78:85:42:ea (capab=0x411 status=0 aid=1)
[ 5833.094586] program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 5833.095338] program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 5833.095398] program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 5833.095427] program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 5833.096224] program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 5833.096267] program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 5833.511606] program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 5833.512358] program smartd is using a deprecated SCSI ioctl, please convert it to SG_IO
_____________________________________ Xorg ____________________________________
xinput:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=10 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=9 [slave keyboard (3)]
↳ TOSHIBA Web Camera - HD id=11 [slave keyboard (3)]
xrandr:
Screen 0: minimum 8 x 8, current 1366 x 768, maximum 32767 x 32767
eDP1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 256mm x 144mm
1366x768 60.07*+
1360x768 59.80 59.96
1280x720 60.00
1024x768 60.00
1024x576 60.00
960x540 60.00
800x600 60.32 56.25
864x486 60.00
640x480 59.94
720x405 60.00
680x384 60.00
640x360 60.00
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
Selection of relevent log entries:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 453.510] (==) No Layout section. Using the first Screen section.
[ 453.510] (==) No screen section available. Using defaults.
[ 453.510] (**) |-->Screen "Default Screen Section" (0)
[ 453.510] (**) | |-->Monitor "<default monitor>"
[ 453.510] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 453.646] (--) PCI:*(0:0:2:0) 8086:0f31:1179:fbb0 rev 10, Mem @ 0xc0000000/4194304, 0xd0000000/268435456, I/O @ 0x0000f080/8
[ 453.646] (II) LoadModule: "glx"
[ 453.653] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 453.764] (II) LoadModule: "intel"
[ 453.765] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 453.812] (II) LoadModule: "modesetting"
[ 453.812] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 453.826] (II) LoadModule: "fbdev"
[ 453.826] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 453.826] (II) LoadModule: "vesa"
[ 453.826] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 453.865] (WW) Falling back to old probe method for modesetting
[ 453.865] (WW) Falling back to old probe method for fbdev
[ 453.865] (II) Loading sub module "fbdevhw"
[ 453.865] (II) LoadModule: "fbdevhw"
[ 453.867] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 453.875] (WW) Falling back to old probe method for vesa
[ 453.885] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 453.892] (II) intel(0): Output eDP1 has no monitor section
[ 453.908] (II) intel(0): Output VGA1 has no monitor section
[ 453.908] (II) intel(0): Output HDMI1 has no monitor section
[ 453.908] (II) intel(0): Output DP1 has no monitor section
[ 453.908] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 453.909] (II) Loading sub module "dri2"
[ 453.909] (II) LoadModule: "dri2"
[ 453.909] (II) Loading sub module "present"
[ 453.909] (II) LoadModule: "present"
[ 453.909] (II) UnloadModule: "modesetting"
[ 453.909] (II) UnloadModule: "fbdev"
[ 453.909] (II) UnloadModule: "vesa"
[ 454.214] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 454.223] (II) intel(0): Setting screen physical size to 361 x 203
[ 454.537] (II) LoadModule: "evdev"
[ 454.537] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 454.560] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[ 454.560] (II) LoadModule: "synaptics"
[ 454.561] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 454.684] (WW) config/udev: device AT Translated Set 2 keyboard already added. Ignoring.
[ 454.685] (WW) config/udev: device SynPS/2 Synaptics TouchPad already added. Ignoring.
[ 456.168] (WW) Option "xkb_variant" requires a string value
[ 456.168] (WW) Option "xkb_options" requires a string value
GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.4.0-31-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.4.0-31-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:f31
BusID "PCI:0@0:2:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Found "/dev/dri/card0", driven by "i915"
output 0:
eDP connector
Number of connected outputs for /dev/dri/card0: 1
Does it require offloading? yes
I couldn't open /var/lib/ubuntu-drivers-common/last_gfx_boot for reading.
Create /var/lib/ubuntu-drivers-common/last_gfx_boot for the 1st time
last cards number = 1
Has amd? no
Has intel? yes
Has nvidia? no
How many cards? 1
Has the system changed? Yes
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
System configuration has changed
Single card detected
Nothing to do
No change - nothing to do
============================ Disks SMART Attributes ===========================
### USB disks: sda sdb
# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-31-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported scsi opcode
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
# Drive sdb:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-31-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported scsi opcode
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
Hors ligne
#4 Le 12/05/2017, à 10:58
- Caribou22
Re : reinstall win8 depuis ubuntu
Il se trouve que j'ai exactement le même problème chez un ami. Deux HDD désespérément invisibles.
Je pense et j'espère que le rapport Bisnext va permettre aux experts d'ici de trouver une solution
Hors ligne
#5 Le 12/05/2017, à 21:13
- Laurent85
Re : reinstall win8 depuis ubuntu
Bonjour, le disque dur est en panne, toutes ces traces dans le journal système le confirme :
[ 20.053877] ata1: COMRESET failed (errno=-16)
[ 30.071891] ata1: COMRESET failed (errno=-16)
[ 62.576389] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 62.610024] ata1.00: failed to read native max address (err_mask=0x1)
[ 62.650995] ata1.00: configured for UDMA/100 (device error ignored)
[ 62.656696] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABF0 3M PQ: 0 ANSI: 5
[ 62.657064] sd 0:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 62.657143] sd 0:0:0:0: Attached scsi generic sg2 type 0
[ 62.680731] ata1.00: exception Emask 0x1 SAct 0x800000 SErr 0x0 action 0x6
[ 62.680848] ata1.00: failed command: READ FPDMA QUEUED
[ 62.680907] ata1.00: cmd 60/08:b8:00:00:00/00:00:00:00:00/40 tag 23 ncq 4096 in
[ 62.681054] ata1.00: status: { ERR }
[ 62.681093] ata1.00: error: { ABRT }
[ 62.681136] ata1: hard resetting link
[ 72.706505] ata1: COMRESET failed (errno=-16)
[ 72.706559] ata1: hard resetting link
[ 82.732525] ata1: COMRESET failed (errno=-16)
[ 82.732576] ata1: hard resetting link
[ 115.293079] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 115.348467] ata1.00: configured for UDMA/100 (device error ignored)
[ 115.373358] ata1.00: NCQ disabled due to excessive errors
[ 115.373363] ata1.00: exception Emask 0x1 SAct 0x2000000 SErr 0x0 action 0x6
[ 115.373479] ata1.00: failed command: READ FPDMA QUEUED
[ 115.373537] ata1.00: cmd 60/08:c8:00:00:00/00:00:00:00:00/40 tag 25 ncq 4096 in
[ 115.373686] ata1.00: status: { ERR }
[ 115.373725] ata1.00: error: { ABRT }
[ 115.373767] ata1: hard resetting link
[ 125.399172] ata1: COMRESET failed (errno=-16)
[ 125.399225] ata1: hard resetting link
[ 135.425196] ata1: COMRESET failed (errno=-16)
[ 135.425255] ata1: hard resetting link
[ 167.977740] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 168.033045] ata1.00: configured for UDMA/100 (device error ignored)
[ 199.092853] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 199.092933] ata1.00: failed command: READ DMA
[ 199.092984] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 4 dma 4096 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 199.093126] ata1.00: status: { DRDY }
[ 199.093168] ata1: hard resetting link
[ 209.118851] ata1: COMRESET failed (errno=-16)
[ 209.118902] ata1: hard resetting link
[ 219.144873] ata1: COMRESET failed (errno=-16)
[ 219.144925] ata1: hard resetting link
Hors ligne
#6 Le 12/05/2017, à 21:31
- Caribou22
Re : reinstall win8 depuis ubuntu
Si le disque dur est HS et que tu es prêt à dépenser un peu pour sauver tes fichiers, regarde le dernier lien dans ma signature
Diskcard est la boîte de rmy, membre de ubuntu-fr super calé dans la récupération de fichiers. (Il m'a sauvé un HDD formaté par erreur)
Hors ligne
#7 Le 12/05/2017, à 21:52
- Mimali
Re : reinstall win8 depuis ubuntu
ca implique que je ne peux pas reparer ou reinstaller windows?
Hors ligne
#8 Le 12/05/2017, à 22:09
- Laurent85
Re : reinstall win8 depuis ubuntu
Non parce qu'il faut changer changer le disque dur.
Hors ligne