Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 16/05/2017, à 09:19

Const

Ubuntu lent à charger

Bonjour à tous,

je ne sais pas si mon sujet est bien placé. En fait, je suis sur Ubuntu depuis quelques années mais ces derniers temps mon ordinateur rame. Alors je ne sais pas si cela vient de la version 16.04 qui serait gourmande en mémoire, si cela vient de l'équipement de mon ordi trop limité... J'avais tout réinstallé en partitionnant pour le swap comme lu sur le forum pour essayer d'optimiser les performances.
Ce qui est lent, c'est au démarrage d'Ubuntu, le bureau est long à charger, l'ouverture d'internet (chromium), de tous les logiciels... et à certains moments mon ordi va ramer pendant quelques temps. Il ne gère pas l'utilisation aussi de plusieurs logiciels en même temps.
Je cherche de l'aide pour savoir d'où vient ce problème de lenteur! Merci beaucoup!

Mon ordi est un emachines E732Z.
Processeur Intel Pentium P6200
Disque 320 GB HDD
Mémoire 2GB DDR3
Carte graphique Intel HD Graphics

Hors ligne

#2 Le 16/05/2017, à 09:23

lepetit

Re : Ubuntu lent à charger

depuis la 16.04, unity bouffe pas mal en ressource (ça consomme moins sur la 17.04)
passe sur la 17.04 ou change d'environnement et passe a xfce par exemple


-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10

Hors ligne

#3 Le 16/05/2017, à 09:33

Const

Re : Ubuntu lent à charger

Ok je vais essayer. Donc ca viendrait seulement de l'interface unity?

Hors ligne

#4 Le 16/05/2017, à 09:35

tarkan99

Re : Ubuntu lent à charger

Salut !

pour être plus précis, 2gb de RAM c'est un peu juste pour unity.

après avoir lancer tes logiciels, peux-tu donner le retour de

mem -h

ainsi que

top

(en utilisant les balises codes <>)

xubuntu 16.04.1 serait plus adapté. Mais les 2 Gb  de RAM seront toujours une limite.

2 Gb de plus et une version 64bits de xubuntu feront la différence.

Dernière modification par tarkan99 (Le 16/05/2017, à 09:42)


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#5 Le 16/05/2017, à 09:42

Const

Re : Ubuntu lent à charger

mem -h

La commande ne fonctionne pas.

Retour de la commande

top
top - 10:38:15 up 39 min,  1 user,  load average: 1,68, 1,51, 1,09
Tâches: 187 total,   1 en cours, 185 en veille,   0 arrêté,   1 zombie
%Cpu(s):  1,7 ut,  1,5 sy,  0,0 ni, 92,4 id,  4,5 wa,  0,0 hi,  0,0 si,  0,0 st
KiB Mem :  1780428 total,   178524 libr,  1138232 util,   463672 tamp/cache
KiB Éch:  3905532 total,  3228716 libr,   676816 util.   324832 dispo Mem 

  PID UTIL.     PR  NI    VIRT    RES    SHR S  %CPU %MEM    TEMPS+ COM.        
  881 root      20   0  377652  20100  10680 S   2,0  1,1   0:57.16 Xorg        
 1713 constan+  20   0 1263592  32844  17552 S   1,7  1,8   1:07.47 compiz      
 4280 constan+  20   0  657900  35764  28212 S   0,7  2,0   0:00.70 gnome-term+ 
 1539 constan+  20   0  471252   8012   3032 S   0,3  0,5   0:00.69 ibus-ui-gt+ 
 1589 constan+  20   0  640508  28788  14244 S   0,3  1,6   0:01.68 unity-pane+ 
 4306 constan+  20   0   41944   3752   3088 R   0,3  0,2   0:00.12 top         
    1 root      20   0  185132   3684   2396 S   0,0  0,2   0:01.60 systemd     
    2 root      20   0       0      0      0 S   0,0  0,0   0:00.00 kthreadd    
    3 root      20   0       0      0      0 S   0,0  0,0   0:00.06 ksoftirqd/0 
    5 root       0 -20       0      0      0 S   0,0  0,0   0:00.00 kworker/0:+ 
    7 root      20   0       0      0      0 S   0,0  0,0   0:03.10 rcu_sched   
    8 root      20   0       0      0      0 S   0,0  0,0   0:00.00 rcu_bh      
    9 root      rt   0       0      0      0 S   0,0  0,0   0:00.00 migration/0 
   10 root      rt   0       0      0      0 S   0,0  0,0   0:00.00 watchdog/0  
   11 root      rt   0       0      0      0 S   0,0  0,0   0:00.00 watchdog/1  
   12 root      rt   0       0      0      0 S   0,0  0,0   0:00.00 migration/1 
   13 root      20   0       0      0      0 S   0,0  0,0   0:00.19 ksoftirqd/1 

Hors ligne

#6 Le 16/05/2017, à 09:43

tarkan99

Re : Ubuntu lent à charger

désolé, c'est

free -h

je vois très peu de logiciels sous ta session. Chromium ouvert ou pas ?

lance bien toutes les appli que tu souhaites utiliser "en même temps" avant d'exécuter free -h

Dernière modification par tarkan99 (Le 16/05/2017, à 09:51)


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#7 Le 16/05/2017, à 10:00

Const

Re : Ubuntu lent à charger

Retour de free -h

constance@constance-eME732Z:~$ free -h
              total       utilisé      libre     partagé tamp/cache   disponible
Mem:           1,7G        1,1G         70M        142M        509M        260M
Partition d'échange:        3,7G        816M        2,9G

Oui j'ai ouvert les logiciels que j'utilise habituellement en même temps. Chromium est également ouvert avec plusieurs onglets. Je redonne la commande top:

top - 10:59:17 up  1:00,  1 user,  load average: 2,35, 3,06, 2,03
Tâches: 214 total,   1 en cours, 212 en veille,   0 arrêté,   1 zombie
%Cpu(s):  1,3 ut,  0,7 sy,  0,0 ni, 38,2 id, 59,8 wa,  0,0 hi,  0,0 si,  0,0 st
KiB Mem :  1780428 total,    83996 libr,  1179336 util,   517096 tamp/cache
KiB Éch:  3905532 total,  2882452 libr,  1023080 util.   250928 dispo Mem 

  PID UTIL.     PR  NI    VIRT    RES    SHR S  %CPU %MEM    TEMPS+ COM.                                                                       
  881 root      20   0  435208  29452  18628 S   1,0  1,7   1:24.44 Xorg                                                                       
 1713 constan+  20   0 1266904  35488  16672 S   1,0  2,0   1:49.33 compiz                                                                     
 4280 constan+  20   0  661544  27088  16748 S   1,0  1,5   0:05.09 gnome-terminal-                                                            
 5761 constan+  20   0   42084   3436   2728 R   0,7  0,2   0:00.57 top                                                                        
  162 root       0 -20       0      0      0 S   0,3  0,0   0:00.66 kworker/1:1H                                                               
  164 root      20   0       0      0      0 D   0,3  0,0   0:00.98 jbd2/sda7-8                                                                
  802 root      20   0   19472    344    340 S   0,3  0,0   0:00.12 irqbalance                                                                 
 1247 root      20   0  347540   4532   2012 D   0,3  0,3   0:00.14 upowerd                                                                    
 1742 constan+  20   0  657588  10632   7232 S   0,3  0,6   0:00.89 nm-applet                                                                  
 1970 constan+  20   0 2529164 140740  19700 S   0,3  7,9   3:03.87 chromium-browse                                                            
 2873 constan+  20   0 1793984 120072  35632 S   0,3  6,7   2:00.97 chromium-browse                                                            
 3884 root      20   0       0      0      0 S   0,3  0,0   0:01.15 kworker/u16:1                                                              
 5928 constan+  20   0 1782764 135260  29436 S   0,3  7,6   0:05.89 chromium-browse                                                            
 9834 root      20   0   25024   9428   2516 D   0,3  0,5   0:00.18 dpkg                                                                       
    1 root      20   0  185192   4440   2848 S   0,0  0,2   0:01.85 systemd                                                                    
    2 root      20   0       0      0      0 S   0,0  0,0   0:00.00 kthreadd                                                                   
    3 root      20   0       0      0      0 S   0,0  0,0   0:00.11 ksoftirqd/0                                                                
    5 root       0 -20       0      0      0 S   0,0  0,0   0:00.00 kworker/0:0H                                                               
    7 root      20   0       0      0      0 S   0,0  0,0   0:04.70 rcu_sched                                                                  
    8 root      20   0       0      0      0 S   0,0  0,0   0:00.00 rcu_bh                                                                     
    9 root      rt   0       0      0      0 S   0,0  0,0   0:00.01 migration/0                                                                
   10 root      rt   0       0      0      0 S   0,0  0,0   0:00.01 watchdog/0                                                                 
   11 root      rt   0       0      0      0 S   0,0  0,0   0:00.01 watchdog/1                                                                 
   12 root      rt   0       0      0      0 S   0,0  0,0   0:00.01 migration/1                                                                
   13 root      20   0       0      0      0 S   0,0  0,0   0:00.33 ksoftirqd/1                                                                
   15 root       0 -20       0      0      0 S   0,0  0,0   0:00.00 kworker/1:0H                                                               
   16 root      20   0       0      0      0 S   0,0  0,0   0:00.00 kdevtmpfs                                                                  
   17 root       0 -20       0      0      0 S   0,0  0,0   0:00.00 netns                                                                      
   18 root       0 -20       0      0      0 S   0,0  0,0   0:00.00 perf                                                                       
   19 root      20   0       0      0      0 S   0,0  0,0   0:00.00 khungtaskd                                                                 
   20 root       0 -20       0      0      0 S   0,0  0,0   0:00.00 writeback                                                                  
   21 root      25   5       0      0      0 S   0,0  0,0   0:00.00 ksmd                                                                       
   22 root      39  19       0      0      0 S   0,0  0,0   0:00.47 khugepaged                                                                 
   23 root       0 -20       0      0      0 S   0,0  0,0   0:00.00 crypto                                                                     
   24 root       0 -20       0      0      0 S   0,0  0,0   0:00.00 kintegrityd                                                                
   25 root       0 -20       0      0      0 S   0,0  0,0   0:00.00 bioset 

Hors ligne

#8 Le 16/05/2017, à 10:05

lepetit

Re : Ubuntu lent à charger

pareil vu le peu de ram que tu as
utilise un navigateur plus léger comme palemoon (firefox allégé)
http://linux.palemoon.org/


-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10

Hors ligne

#9 Le 16/05/2017, à 10:07

tarkan99

Re : Ubuntu lent à charger

le résultat de mem est sans appel : là, il reste 70M de RAM. C'est vraiment trop juste, surtout pour unity.
Le swap est utilisé (816M), pour palier au manque de mémoire, mais le swap est sur disque, donc bien plus lent que la RAM.

sans ajouter 2Gb minimum de RAM, tu vas difficilement augmenter les perf.
surtout le CPU n'est pas à la "ramasse".

peux-tu fournir un rapport bisnext (état disque, etc....)
https://doc.ubuntu-fr.org/bisnext#insta … n_standard

Dernière modification par tarkan99 (Le 16/05/2017, à 10:10)


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#10 Le 16/05/2017, à 10:13

lepetit

Re : Ubuntu lent à charger

Const a écrit :

Ok je vais essayer. Donc ca viendrait seulement de l'interface unity?

oui de manière général, unity ça pompe pas mal
essaye xfce
je le fais tourner tranquille chez moi sur une 16.04 avec celeron m 1.7 ghz + 1.5go de ram + nvidia geforce 710, donc chez toi ça tournera tranquille

Dernière modification par lepetit (Le 16/05/2017, à 10:14)


-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10

Hors ligne

#11 Le 16/05/2017, à 10:16

tarkan99

Re : Ubuntu lent à charger

lance le rapport bisnext avant, pour voir s'il y a pas d'autres soucis avant de lancer un installation de zero.

et prend bien l'ISO 16.04.1 32 bits de xubuntu si tu gardes 2 gb ou bien la 64 bits si tu comptes ajouter 2 Gb.


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#12 Le 16/05/2017, à 10:33

Const

Re : Ubuntu lent à charger

Voici le rapport bisnext

May 16 2017, bisnext report id e4c4d also available at https://paste.debian.net/932681/

                                 bisnext 0.02


============================ Hardware and System Summary ======================

System:    Kernel: 4.4.0-75-generic x86_64 (64 bit gcc: 5.4.0)
           Desktop: N/A dm: lightdm Distro: Ubuntu 16.04.2 LTS
Machine:   Device: laptop System: eMachines product: eME732Z v: V1.08
           Mobo: eMachines model: HM55_CP
           BIOS: INSYDE v: V1.08 date: 02/14/2011
Battery    BAT1: charge: 16.1 Wh 65.1% condition: 24.7/44.0 Wh (56%)
           volts: 12.2/10.8
           model: SONY AS10D41 status: Charging
CPU:       Dual core Intel Pentium P6200 (-MCP-) cache: 3072 KB
           flags: (lm nx sse sse2 sse3 ssse3) bmips: 8512
           clock speeds: min/max: 933/2133 MHz 1: 1599 MHz 2: 1599 MHz
Memory:    Array-1 capacity: 16 GB devices: 2 EC: None max module size: 8 GB
           Device-1: DIMM0 size: No Module Installed type: DDR3
           Device-2: DIMM1 size: No Module Installed type: DDR3
           Device-3: DIMM1 size: 2 GB (Single-bank) speed: 1067 MHz type: DDR3
           manufacturer: N/A part: NT2GC64B88B0NS-CG
           Device-4: DIMM3 size: No Module Installed type: DDR3
           Device-5: N/A size: N/A type: N/A
           Device-6: N/A size: N/A type: N/A
           Device-7: N/A size: N/A type: N/A
Graphics:  Card: Intel Core Processor Integrated Graphics Controller
           bus-ID: 00:02.0 chip-ID: 8086:0046
           Display Server: X.Org 1.18.4 drivers: intel (unloaded: modesetting,fbdev,vesa)
           tty size: 1366x768@60.01hz
           GLX Renderer: Mesa DRI Intel Ironlake Mobile
           GLX Version: 2.1 Mesa 12.0.6 Direct Rendering: Yes
Audio:     Card Intel 5 Series/3400 Series High Definition Audio
           driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:3b56
           Sound: Advanced Linux Sound Architecture v: k4.4.0-75-generic
Network:   Card-1: Broadcom NetLink BCM57780 Gigabit Ethernet PCIe
           driver: tg3 v: 3.137 bus-ID: 01:00.0 chip-ID: 14e4:1692
           IF: enp1s0 state: down mac: <filter>
           Card-2: Broadcom BCM43225 802.11b/g/n
           driver: wl bus-ID: 02:00.0 chip-ID: 14e4:4357
           IF: wlp2s0 state: up mac: <filter>
Drives:    HDD Total Size: 320.1GB (6.2% used)
           ID-1: /dev/sda model: WDC_WD3200BEVT size: 320.1GB
           temp: 40C
           Optical: /dev/sr0 model: MATSHITA DVD-RAM UJ8A0AS
           rev: 1.00 dev-links: cdrom,cdrw,dvd,dvdrw
           Features: speed: 24x multisession: yes
           audio: yes dvd: yes rw: cd-r,cd-rw,dvd-r,dvd-ram state: running
Partition: ID-1: / size: 288G used: 16G (6%) fs: ext4 dev: /dev/sda7
           label: N/A uuid: 5b192459-bdf5-4c18-a0ff-b7dabfcedc70
           ID-2: /tmp size: 1.9G used: 3.9M (1%) fs: ext4 dev: /dev/sda6
           label: N/A uuid: 602c9e8d-9f3b-4f45-a9ab-ecb549f137a2
           ID-3: swap-1 size: 4.00GB used: 1.21GB (30%) fs: swap dev: /dev/sda5
           label: N/A uuid: 45a7e059-d890-4c2d-9ae3-61160750c46c
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors:   System Temperatures: cpu: 54.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Repos:     Active apt sources in file: /etc/apt/sources.list
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates main restricted
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial universe
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates universe
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial multiverse
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates multiverse
           deb http://fr.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
           deb http://security.ubuntu.com/ubuntu xenial-security main restricted
           deb http://security.ubuntu.com/ubuntu xenial-security universe
           deb http://security.ubuntu.com/ubuntu xenial-security multiverse
Processes: CPU: % used - Memory: MB / % used - top 10 active
           1: cpu: 6.2% command: chromium-browser pid: 1970 mem: 239.39MB (13.7%)
           2: cpu: 3.2% command: chromium-browser pid: 2873 mem: 146.60MB (8.4%)
           3: cpu: 2.8% command: chromium-browser pid: 2072 mem: 66.16MB (3.8%)
           4: cpu: 2.8% command: compiz pid: 1713 mem: 30.55MB (1.7%)
           5: cpu: 2.1% command: chromium-browser pid: 24920 mem: 110.90MB (6.3%)
           6: cpu: 2.0% command: Xorg pid: 881 mem: 16.86MB (0.9%)
           7: cpu: 0.6% command: gnome-terminal-server pid: 24873 mem: 33.60MB (1.9%)
           8: cpu: 0.4% command: chromium-browser pid: 2140 mem: 189.47MB (10.8%)
           9: cpu: 0.4% command: chromium-browser pid: 2125 mem: 200.43MB (11.5%)
           10: cpu: 0.3% command: bash pid: 25542 mem: 4.27MB (0.2%)
           Memory: MB / % used - CPU: % used - top 10 active
           1: mem: 239.39MB (13.7%) command: chromium-browser pid: 1970 cpu: 6.2%
           2: mem: 200.43MB (11.5%) command: chromium-browser pid: 2125 cpu: 0.4%
           3: mem: 189.47MB (10.8%) command: chromium-browser pid: 2140 cpu: 0.4%
           4: mem: 146.60MB (8.4%) command: chromium-browser pid: 2873 cpu: 3.2%
           5: mem: 110.90MB (6.3%) command: chromium-browser pid: 24920 cpu: 2.1%
           6: mem: 66.16MB (3.8%) command: chromium-browser pid: 2072 cpu: 2.8%
           7: mem: 33.60MB (1.9%) command: gnome-terminal-server pid: 24873 cpu: 0.6%
           8: mem: 31.29MB (1.7%) command: chromium-browser pid: 2139 cpu: 0.1%
           9: mem: 30.55MB (1.7%) command: compiz pid: 1713 cpu: 2.8%
           10: mem: 27.18MB (1.5%) command: unity-panel-service pid: 1589 cpu: 0.0%
Info:      Processes: 200 Uptime: 1:32 Memory: 1098.3/1738.7MB
           Init: systemd v: 229 runlevel: 5 default: 2 Gcc sys: 5.4.0
           Client: Shell (bash 4.3.461 running in bash) inxi: 2.3.8


_______________________________ UEFI settings _________________________________

Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.


__________________________________ Secure Boot ________________________________

Secure Boot disabled or not available on this system.




========================= Boot Information Details ============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos7)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  Grub2 (v1.99-2.00)
    Boot sector info:  Grub2 (v2.00) is installed in the boot sector of sda5 
                       and looks at sector 50842704 of the same hard drive 
                       for core.img. core.img is at this location and looks 
                       for (,msdos5)/boot/grub. It also embeds following 
                       components:
                       
                       modules
                       -------------------------------------------------------
                       fshelp ext2 part_msdos biosdisk
                       -------------------------------------------------------

sda6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

sda7: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.2 LTS
    Boot files:         /boot/grub/grub.cfg /etc/fstab /etc/default/grub  
                       /boot/grub/i386-pc/core.img

_________________________=== Drive/Partition Info ===__________________________

Drive: sda _____________________________________________________________________
Disque /dev/sda : 298,1 GiB, 320072933376 octets, 625142448 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,046   625,141,759   625,139,714   5 Extended
/dev/sda5               2,048     7,813,119     7,811,072  82 Linux swap / Solaris
/dev/sda6         621,236,224   625,141,759     3,905,536  83 Linux
/dev/sda7           7,815,168   621,235,089   613,419,922  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda5        45a7e059-d890-4c2d-9ae3-61160750c46c   swap       
/dev/sda6        602c9e8d-9f3b-4f45-a9ab-ecb549f137a2   ext4       
/dev/sda7        5b192459-bdf5-4c18-a0ff-b7dabfcedc70   ext4       

_________________________ "ls -l /dev/disk/by_id" output ______________________

total 0
lrwxrwxrwx 1 root root  9 mai   16 09:58 ata-MATSHITADVD-RAM_UJ8A0AS_YL67_338774 -> ../../sr0
lrwxrwxrwx 1 root root  9 mai   16 09:58 ata-WDC_WD3200BEVT-22A23T0_WD-WXL1AB016280 -> ../../sda
lrwxrwxrwx 1 root root 10 mai   16 09:58 ata-WDC_WD3200BEVT-22A23T0_WD-WXL1AB016280-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mai   16 09:58 ata-WDC_WD3200BEVT-22A23T0_WD-WXL1AB016280-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 mai   16 09:58 ata-WDC_WD3200BEVT-22A23T0_WD-WXL1AB016280-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 mai   16 09:58 ata-WDC_WD3200BEVT-22A23T0_WD-WXL1AB016280-part7 -> ../../sda7
lrwxrwxrwx 1 root root  9 mai   16 09:58 wwn-0x50014ee600c48732 -> ../../sda
lrwxrwxrwx 1 root root 10 mai   16 09:58 wwn-0x50014ee600c48732-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 mai   16 09:58 wwn-0x50014ee600c48732-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 mai   16 09:58 wwn-0x50014ee600c48732-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 mai   16 09:58 wwn-0x50014ee600c48732-part7 -> ../../sda7

________________________________ Mount points _________________________________

Device           Mount_Point              Type       Options
/dev/sda7        /                                   ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sda6        /tmp                                ext4 (rw,relatime,data=ordered)





__________________________=== Boot Files Content ===___________________________


___________________________ sda7/boot/grub/grub.cfg: ___________________________

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/10_linux ###

--- Notice bisnext removed top of file content from the report for readability

menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-5b192459-bdf5-4c18-a0ff-b7dabfcedc70' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos7'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7  5b192459-bdf5-4c18-a0ff-b7dabfcedc70
	else
	  search --no-floppy --fs-uuid --set=root 5b192459-bdf5-4c18-a0ff-b7dabfcedc70
	fi
        linux	/boot/vmlinuz-4.4.0-75-generic root=UUID=5b192459-bdf5-4c18-a0ff-b7dabfcedc70 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.4.0-75-generic
}

--- Notice bisnext removed the submenu section from the report for readability

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos7'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7  5b192459-bdf5-4c18-a0ff-b7dabfcedc70
	else
	  search --no-floppy --fs-uuid --set=root 5b192459-bdf5-4c18-a0ff-b7dabfcedc70
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos7'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos7 --hint-efi=hd0,msdos7 --hint-baremetal=ahci0,msdos7  5b192459-bdf5-4c18-a0ff-b7dabfcedc70
	else
	  search --no-floppy --fs-uuid --set=root 5b192459-bdf5-4c18-a0ff-b7dabfcedc70
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

_______________________________ sda7/etc/fstab: ________________________________

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda7 during installation
UUID=5b192459-bdf5-4c18-a0ff-b7dabfcedc70 /               ext4    errors=remount-ro 0       1
# /tmp was on /dev/sda6 during installation
UUID=602c9e8d-9f3b-4f45-a9ab-ecb549f137a2 /tmp            ext4    defaults        0       2
# swap was on /dev/sda5 during installation
UUID=45a7e059-d890-4c2d-9ae3-61160750c46c none            swap    sw              0       0

____________________________ sda7/etc/default/grub: ____________________________

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"


===============================================================================
                          Running System Information                           
===============================================================================

______________________________ Kernel parameters ______________________________

BOOT_IMAGE=/boot/vmlinuz-4.4.0-75-generic root=UUID=5b192459-bdf5-4c18-a0ff-b7dabfcedc70 ro quiet splash vt.handoff=7


______________________________ Boot-up Statistics ______________________________

Startup finished in 3.790s (kernel) + 32.079s (userspace) = 35.870s


blame, first 10:
dev-sda7.device                                                                            11.656s
systemd-fsck@dev-disk-by\x2duuid-602c9e8d\x2d9f3b\x2d4f45\x2da9ab\x2decb549f137a2.service  9.386s
NetworkManager.service                                                                     4.125s
thermald.service                                                                           4.076s
plymouth-start.service                                                                     3.492s
ModemManager.service                                                                       3.095s
accounts-daemon.service                                                                    3.093s
grub-common.service                                                                        2.464s
systemd-udevd.service                                                                      1.990s
keyboard-setup.service                                                                     1.791s


critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

  1 graphical.target @31.855s
  2 multi-user.target @31.855s
  3 getty.target @31.855s
  4 getty@tty1.service @31.855s
  5 rc-local.service @31.841s +2ms
  6 network.target @31.819s
  7 NetworkManager.service @27.693s +4.125s
  8 dbus.service @27.377s
  9 basic.target @27.348s
 10 sockets.target @27.348s
 11 snapd.socket @27.325s +12ms
 12 sysinit.target @27.285s
 13 apparmor.service @25.605s +1.664s
 14 local-fs.target @25.591s
 15 tmp.mount @25.093s +497ms
 16 systemd-fsck@dev-disk-by\x2duuid-602c9e8d\x2d9f3b\x2d4f45\x2da9ab\x2decb549f137a2.service @15.605s +9.386s
 17 dev-disk-by\x2duuid-602c9e8d\x2d9f3b\x2d4f45\x2da9ab\x2decb549f137a2.device @15.596s


_________________________ RAM usage & Free disk space _________________________

              total        used        free      shared  buff/cache   available
Mem:           1.7G        1.0G        174M         95M        547M        444M
Swap:          3.7G        1.1G        2.6G
Swappiness = 60

Filesystem     Mounted on Type  Size  Used Avail Use% IUse%
/dev/sda6      /tmp       ext4  1.9G  4.1M  1.7G   1%    1%
/dev/sda7      /          ext4  288G   16G  259G   6%    2%


_________________________________ USB devices __________________________________

Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 04f2:b1d8 Chicony Electronics Co., Ltd 
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/3p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/8p, 480M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/3p, 480M
    |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
        |__ Port 1: Dev 3, If 0, Class=Video, Driver=uvcvideo, 480M
        |__ Port 1: Dev 3, If 1, Class=Video, Driver=uvcvideo, 480M


_______________________________ Wireless Status _______________________________

0: phy0: Wireless LAN
	Soft blocked: no
	Hard blocked: no
1: brcmwl-0: Wireless LAN
	Soft blocked: no
	Hard blocked: no
2: acer-wireless: Wireless LAN
	Soft blocked: no
	Hard blocked: no


___________________________________ Modules Loaded ____________________________

Module                  Size  Used by
acer_wmi               20480  0
ahci                   36864  3
autofs4                40960  2
bcm_phy_lib            16384  1 broadcom
binfmt_misc            20480  1
broadcom               20480  0
btrfs                 987136  0
cfg80211              565248  1 wl
coretemp               16384  0
cpuid                  16384  0
drm                   364544  6 i915,drm_kms_helper
drm_kms_helper        155648  1 i915
fb_sys_fops            16384  1 drm_kms_helper
fjes                   28672  0
hfs                    57344  0
hfsplus               106496  0
i2c_algo_bit           16384  1 i915
i915                 1208320  4
input_leds             16384  0
intel_ips              20480  0
intel_powerclamp       16384  0
jfs                   180224  0
joydev                 20480  0
libahci                32768  1 ahci
libcrc32c              16384  1 xfs
lp                     20480  0
lpc_ich                24576  0
mac_hid                16384  0
media                  24576  2 uvcvideo,videodev
mei                    98304  1 mei_me
mei_me                 36864  0
minix                  36864  0
msdos                  20480  0
ntfs                   98304  0
parport                49152  3 lp,ppdev,parport_pc
parport_pc             32768  0
ppdev                  20480  0
pps_core               20480  1 ptp
psmouse               131072  0
ptp                    20480  1 tg3
qnx4                   16384  0
raid6_pq              102400  1 btrfs
serio_raw              16384  0
shpchp                 36864  0
snd                    81920  17 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
snd_hda_codec         135168  4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_hda_codec_generic    77824  1 snd_hda_codec_realtek
snd_hda_codec_hdmi     53248  1
snd_hda_codec_realtek    86016  1
snd_hda_core           73728  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
snd_hda_intel          40960  3
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               106496  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                69632  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_timer              32768  2 snd_pcm,snd_seq
soundcore              16384  1 snd
sparse_keymap          16384  1 acer_wmi
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
tg3                   163840  1
ufs                    73728  0
uvcvideo               90112  0
v4l2_common            16384  1 videobuf2_v4l2
video                  40960  2 i915,acer_wmi
videobuf2_core         36864  2 uvcvideo,videobuf2_v4l2
videobuf2_memops       16384  1 videobuf2_vmalloc
videobuf2_v4l2         28672  1 uvcvideo
videobuf2_vmalloc      16384  1 uvcvideo
videodev              176128  4 uvcvideo,v4l2_common,videobuf2_core,videobuf2_v4l2
wl                   6447104  0
wmi                    20480  1 acer_wmi
xfs                   970752  0
xor                    24576  1 btrfs


______________________________ Additional Drivers _____________________________

== cpu-microcode.py ==
driver   : intel-microcode - distro non-free

== /sys/devices/pci0000:00/0000:00:1c.5/0000:02:00.0 ==
vendor   : Broadcom Corporation
model    : BCM43225 802.11b/g/n (T77H103.00 Wireless Half-size Mini PCIe Card)
modalias : pci:v000014E4d00004357sv0000105Bsd0000E021bc02sc80i00
driver   : bcmwl-kernel-source - distro non-free



__________________________________ Locales ___________________________________

locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=

/etc/default/locale:
#  File generated by update-locale
LANG="fr_FR.UTF-8"

Active keyboard layout:
rules:      evdev
model:      pc105
layout:     fr,fr,us
variant:    ,oss,

Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT="fr"
XKBVARIANT=""
XKBOPTIONS=""
BACKSPACE="guess"


_____________________________ Upgradable Packages _____________________________

linux-generic          4.4.0.77.83  from:4.4.0.75.81
linux-headers-generic  4.4.0.77.83  from:4.4.0.75.81
linux-image-generic    4.4.0.77.83  from:4.4.0.75.81


________________________ Package Configuration Pending ________________________

None


__________________________ Package Installation Pending _______________________

Reading package lists...
Building dependency tree...
Reading state information...
0 upgraded, 0 newly installed, 0 to remove and 3 not upgraded.


__________________ Configuration files of uninstalled packages: ________________

Package                             Version
linux-image-4.4.0-31-generic        4.4.0-31.50
linux-image-4.4.0-53-generic        4.4.0-53.74
linux-image-4.4.0-59-generic        4.4.0-59.80
linux-image-4.4.0-64-generic        4.4.0-64.85
linux-image-4.4.0-66-generic        4.4.0-66.87
linux-image-4.4.0-71-generic        4.4.0-71.92
linux-image-extra-4.4.0-31-generic  4.4.0-31.50
linux-image-extra-4.4.0-53-generic  4.4.0-53.74
linux-image-extra-4.4.0-59-generic  4.4.0-59.80
linux-image-extra-4.4.0-64-generic  4.4.0-64.85
linux-image-extra-4.4.0-66-generic  4.4.0-66.87
linux-image-extra-4.4.0-71-generic  4.4.0-71.92
snap-confine                        2.24.1


Use the following command to clean old configuration files:
sudo apt purge linux-image-4.4.0-31-generic linux-image-4.4.0-53-generic linux-image-4.4.0-59-generic linux-image-4.4.0-64-generic linux-image-4.4.0-66-generic linux-image-4.4.0-71-generic linux-image-extra-4.4.0-31-generic linux-image-extra-4.4.0-53-generic linux-image-extra-4.4.0-59-generic linux-image-extra-4.4.0-64-generic linux-image-extra-4.4.0-66-generic linux-image-extra-4.4.0-71-generic snap-confine


_________________________ Kernel Packages Installed __________________________

Package                             Version
linux-generic                       4.4.0.75.81
linux-headers-4.4.0-72              4.4.0-72.93
linux-headers-4.4.0-72-generic      4.4.0-72.93
linux-headers-4.4.0-75              4.4.0-75.96
linux-headers-4.4.0-75-generic      4.4.0-75.96
linux-headers-generic               4.4.0.75.81
linux-image-4.4.0-72-generic        4.4.0-72.93
linux-image-4.4.0-75-generic        4.4.0-75.96
linux-image-extra-4.4.0-72-generic  4.4.0-72.93
linux-image-extra-4.4.0-75-generic  4.4.0-75.96
linux-image-generic                 4.4.0.75.81


File list in /boot directory:
abi-4.4.0-72-generic
abi-4.4.0-75-generic
config-4.4.0-72-generic
config-4.4.0-75-generic
grub
initrd.img-4.4.0-72-generic
initrd.img-4.4.0-75-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.4.0-72-generic
System.map-4.4.0-75-generic
vmlinuz-4.4.0-72-generic
vmlinuz-4.4.0-75-generic


_________________________________ System Logs ________________________________

Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.


Selection of relevent log entries:
[    0.253531] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.256964] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.262712] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.288255] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.288811] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.289218] SCSI subsystem initialized
[    1.076474] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.232973] scsi host0: ahci
[    1.251562] scsi host1: ahci
[    1.252888] scsi host2: ahci
[    1.256872] scsi host3: ahci
[    1.576893] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.579934] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEVT-2 1A01 PQ: 0 ANSI: 5
[    1.580422] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    1.580443] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.680635] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.896868] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.905228] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8A0AS  1.00 PQ: 0 ANSI: 5
[    1.923607] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.923816] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.923875] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   11.535347] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[   12.338186] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[   12.338199] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[   12.338204] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[   12.338209] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[   15.655312] wl: module verification failed: signature and/or required key missing - tainting kernel
[   31.145725] audit: type=1400 audit(1494921534.506:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=639 comm="apparmor_parser"
[   31.145736] audit: type=1400 audit(1494921534.506:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=639 comm="apparmor_parser"
[   31.145928] audit: type=1400 audit(1494921534.506:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=640 comm="apparmor_parser"
[   31.145936] audit: type=1400 audit(1494921534.506:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=640 comm="apparmor_parser"
[   31.145942] audit: type=1400 audit(1494921534.506:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=640 comm="apparmor_parser"
[   31.145948] audit: type=1400 audit(1494921534.506:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=640 comm="apparmor_parser"
[   31.169075] audit: type=1400 audit(1494921534.530:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=643 comm="apparmor_parser"
[   31.169086] audit: type=1400 audit(1494921534.530:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app//oxide_helper" pid=643 comm="apparmor_parser"
[   31.171120] audit: type=1400 audit(1494921534.530:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=644 comm="apparmor_parser"
[   31.171129] audit: type=1400 audit(1494921534.530:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=644 comm="apparmor_parser"
[ 4453.752067] [Firmware Bug]: battery: (dis)charge rate invalid.


_____________________________________ Xorg ____________________________________

xinput:
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ SynPS/2 Synaptics TouchPad              	id=12	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Power Button                            	id=6	[slave  keyboard (3)]
    ↳ Video Bus                               	id=7	[slave  keyboard (3)]
    ↳ Power Button                            	id=8	[slave  keyboard (3)]
    ↳ Sleep Button                            	id=9	[slave  keyboard (3)]
    ↳ 1.3M WebCam                             	id=10	[slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard            	id=11	[slave  keyboard (3)]
    ↳ Acer WMI hotkeys                        	id=13	[slave  keyboard (3)]


xrandr:
Screen 0: minimum 8 x 8, current 1366 x 768, maximum 32767 x 32767
LVDS1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
   1366x768      60.01*+
   1360x768      59.80    59.96  
   1280x720      60.00  
   1024x768      60.00  
   1024x576      60.00  
   960x540       60.00  
   800x600       60.32    56.25  
   864x486       60.00  
   640x480       59.94  
   720x405       60.00  
   680x384       60.00  
   640x360       60.00  
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)


Selection of relevent log entries:
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    35.416] (==) No Layout section.  Using the first Screen section.
[    35.416] (==) No screen section available. Using defaults.
[    35.416] (**) |-->Screen "Default Screen Section" (0)
[    35.416] (**) |   |-->Monitor "<default monitor>"
[    35.942] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    35.962] (--) PCI:*(0:0:2:0) 8086:0046:1025:0498 rev 24, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x00003050/8
[    35.962] (II) LoadModule: "glx"
[    36.031] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    37.187] (II) LoadModule: "intel"
[    37.187] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    37.291] (II) LoadModule: "modesetting"
[    37.291] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    37.291] (II) LoadModule: "fbdev"
[    37.291] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    37.291] (II) LoadModule: "vesa"
[    37.291] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    37.391] (WW) Falling back to old probe method for modesetting
[    37.391] (WW) Falling back to old probe method for fbdev
[    37.391] (II) Loading sub module "fbdevhw"
[    37.391] (II) LoadModule: "fbdevhw"
[    37.391] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    37.392] (WW) Falling back to old probe method for vesa
[    37.420] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    37.451] (II) intel(0): Output LVDS1 has no monitor section
[    37.460] (II) intel(0): Output VGA1 has no monitor section
[    37.460] (II) intel(0): Output HDMI1 has no monitor section
[    37.460] (II) intel(0): Output DP1 has no monitor section
[    37.460] (II) intel(0): Output VIRTUAL1 has no monitor section
[    37.460] (II) Loading sub module "dri2"
[    37.460] (II) LoadModule: "dri2"
[    37.460] (II) Loading sub module "present"
[    37.460] (II) LoadModule: "present"
[    37.460] (II) UnloadModule: "modesetting"
[    37.460] (II) UnloadModule: "fbdev"
[    37.461] (II) UnloadModule: "vesa"
[    38.128] (II) GLX: Initialized DRI2 GL provider for screen 0
[    38.159] (II) intel(0): Setting screen physical size to 361 x 203
[    38.281] (II) LoadModule: "evdev"
[    38.281] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    38.334] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[    38.334] (II) LoadModule: "synaptics"
[    38.334] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so


GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-nvidia-was-loaded file
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.4.0-75-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.4.0-75-generic/updates/dkms
Is nvidia loaded? no
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? yes
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? no
Is fglrx kernel module available? no
Is nvidia kernel module available? no
Vendor/Device Id: 8086:46
BusID "PCI:0@0:2:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Skipping "/dev/dri/card0", driven by "i915"
Found "/dev/dri/card0", driven by "i915"
output 0:
	card0-LVDS-1
Number of connected outputs for /dev/dri/card0: 1
Does it require offloading? yes
last cards number = 1
Has amd? no
Has intel? yes
Has nvidia? no
How many cards? 1
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/x86_64-linux-gnu/mesa/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? no
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? yes
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? no
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
Single card detected
Nothing to do
No change - nothing to do


============================ Disks SMART Attributes ===========================



### ATA disks: sda

# Drive sda:
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-75-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Scorpio Blue Serial ATA
Device Model:     WDC WD3200BEVT-22A23T0
LU WWN Device Id: 5 0014ee 600c48732
Firmware Version: 01.01A01
User Capacity:    320 072 933 376 bytes [320 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Tue May 16 11:31:16 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   152   138   021    -    1400
  4 Start_Stop_Count        -O--CK   098   098   000    -    2810
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   100   253   000    -    0
  9 Power_On_Hours          -O--CK   092   092   000    -    6472
 10 Spin_Retry_Count        -O--CK   100   100   000    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   098   098   000    -    2675
191 G-Sense_Error_Rate      -O--CK   001   001   000    -    2203
192 Power-Off_Retract_Count -O--CK   200   200   000    -    217
193 Load_Cycle_Count        -O--CK   106   106   000    -    282738
194 Temperature_Celsius     -O---K   104   084   000    -    39
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
No Errors Logged

Hors ligne

#13 Le 16/05/2017, à 10:41

tarkan99

Re : Ubuntu lent à charger

pas de soucis particulier, le disque sain.

tu étais déjà en 16.04.1, donc aucun soucis à prévoir avec xubuntu 16.04.1
tous les pilotes sont les mêmes que ubuntu.

y plus qu'à faire ton choix entre 32 et 64 bits, comme indiqué en #11 !


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#14 Le 16/05/2017, à 11:01

Const

Re : Ubuntu lent à charger

Ok! il vaut mieux faire une réinstallation de zéro alors ou une migration?

Hors ligne

#15 Le 16/05/2017, à 11:05

tarkan99

Re : Ubuntu lent à charger

de 0, j'en ai bien peur.

je ne sais pas si la migration est possible mais je ne tenterai pas.

Je conseille une installation de 0.


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#16 Le 17/05/2017, à 09:56

Const

Re : Ubuntu lent à charger

Voilà, j'ai enfin installé de zéro xubuntu en 32 bits et ca à l'air de fonctionner. Je n'ai pas encore tout testé. Faut que je m'habitue aussi!
Ce qui change en version 32 bits par rapport au 64 bits, c'est à l'utilisation de la ram et processeur? mais en soi, ca ne change rien dans mon utilisation?

Hors ligne

#17 Le 17/05/2017, à 10:34

Caribou22

Re : Ubuntu lent à charger

Const a écrit :

Voilà, j'ai enfin installé de zéro xubuntu en 32 bits et ca à l'air de fonctionner. Je n'ai pas encore tout testé. Faut que je m'habitue aussi!
Ce qui change en version 32 bits par rapport au 64 bits, c'est à l'utilisation de la ram et processeur? mais en soi, ca ne change rien dans mon utilisation?

Bon choix smile
La version 32 bits consomme un peu moins de RAM. Et l'immense majorité des logiciels est disponible en 32 bits donc pas de changements majeurs dans ton utilisation.

Hors ligne

#18 Le 17/05/2017, à 11:36

Roschan

Re : Ubuntu lent à charger

Caribou22 a écrit :
Const a écrit :

Voilà, j'ai enfin installé de zéro xubuntu en 32 bits et ca à l'air de fonctionner. Je n'ai pas encore tout testé. Faut que je m'habitue aussi!
Ce qui change en version 32 bits par rapport au 64 bits, c'est à l'utilisation de la ram et processeur? mais en soi, ca ne change rien dans mon utilisation?

Bon choix smile
La version 32 bits consomme un peu moins de RAM. Et l'immense majorité des logiciels est disponible en 32 bits donc pas de changements majeurs dans ton utilisation.

Chrome/ium ça n'existe pas en 32 bits il me semble neutral

Hors ligne

#19 Le 17/05/2017, à 13:27

lepetit

Re : Ubuntu lent à charger

toute facon chromium/chrome/opera/firefox ça bouffe trop de ram pour sa config

essaie palemoon yikes


-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10

Hors ligne

#20 Le 18/05/2017, à 12:57

Const

Re : Ubuntu lent à charger

Retour après une journée d'utilisation! Donc installation xubuntu en 32 bits, c'est plus fluide en effet!
Après j'ai remis chromium car en fait je fais beaucoup de chose avec mon compte google... hmm
Hier, l'ordi a bien ramé avec chromium ouvert et lorsque j'ai branché mon disque dur externe de 2To... En utilisant juste chromium, ca va à part quelques sites lourds en images qui sont long à charger...
Ce ralentissement, c'est lié à mes seuls 2go de RAM?

Hors ligne

#21 Le 18/05/2017, à 14:27

Caribou22

Re : Ubuntu lent à charger

Une astuce que j'utilise. Installer le moniteur de charge système qui t'affiche l'occupation du CPU, de la RAM et du SWAP : Clic droit sur le tableau de bord de XFCE, ajouter des greffons, moniteur de charge système.

Tu y verras la charge globale de ton PC. Quand les RAM sont saturées et que le SWAP commence à se remplir, c'est que l'OS en demande trop au PC. (Et Xubuntu a beau utiliser XFCE, il reste gourmand... )

Hors ligne

#22 Le 18/05/2017, à 19:42

Const

Re : Ubuntu lent à charger

Caribou22 a écrit :

Une astuce que j'utilise. Installer le moniteur de charge système qui t'affiche l'occupation du CPU, de la RAM et du SWAP : Clic droit sur le tableau de bord de XFCE, ajouter des greffons, moniteur de charge système.

Tu y verras la charge globale de ton PC. Quand les RAM sont saturées et que le SWAP commence à se remplir, c'est que l'OS en demande trop au PC. (Et Xubuntu a beau utiliser XFCE, il reste gourmand... )

J'ai installé le moniteur de charge système suivant ton conseil Caribou22! En fait ma RAM est toujours utilisée à plus de 60% en utilisation minimale de mon ordi... donc ca sature très vite!

Hors ligne

#23 Le 18/05/2017, à 19:54

lepetit

Re : Ubuntu lent à charger

avec chromium ouvert ?


-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10

Hors ligne

#24 Le 18/05/2017, à 21:17

tarkan99

Re : Ubuntu lent à charger

Les 2 go sont clairement une limite.

Modifie le swapiness pour que le swap soit utilisé le plus tard possible via

echo vm.swappiness=10 | sudo tee /etc/sysctl.d/99-swappiness.conf
sudo sysctl -p /etc/sysctl.d/99-swappiness.conf

https://doc.ubuntu-fr.org/swap#regler_l … nt_du_swap

ensuite avec tes logiciels ouverts, donne le retour de

free -h
top

Dernière modification par tarkan99 (Le 18/05/2017, à 21:17)


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#25 Le 18/05/2017, à 22:38

Caribou22

Re : Ubuntu lent à charger

Const a écrit :
Caribou22 a écrit :

Une astuce que j'utilise. Installer le moniteur de charge système qui t'affiche l'occupation du CPU, de la RAM et du SWAP : Clic droit sur le tableau de bord de XFCE, ajouter des greffons, moniteur de charge système.

Tu y verras la charge globale de ton PC. Quand les RAM sont saturées et que le SWAP commence à se remplir, c'est que l'OS en demande trop au PC. (Et Xubuntu a beau utiliser XFCE, il reste gourmand... )

J'ai installé le moniteur de charge système suivant ton conseil Caribou22! En fait ma RAM est toujours utilisée à plus de 60% en utilisation minimale de mon ordi... donc ca sature très vite!

Alors tu peux tenter de raboter ta Xubuntu en utilisant des logiciels plus légers, ou passer à Lubuntu 32 bitsqui rabotera un peu plus la consommation de RAM.
Mais personnellement (mon seul avis donc), je serais passé à Debian qui consomme beaucoup moins et tourne sans problème sur des configs à moins de 1 Go de RAM.

Hors ligne