Pages : 1
#1 Le 16/05/2017, à 00:14
- Bougron
Garmin OREGON
Bonsoir.
Tout d'abord, merci au modérateur de déplacer ma demande si elle n'est pas au bon endroit.
Mes enfants m'ont offert un Garmin Oregon.
Le logiciel incorporé est tellement CRETIN qu'il est inexploitable.
J'ai tenté de l'apprivoiser. Je croyais avoir compris. Mais je me suis trompé.
.
Pendant quelques semaines, je pouvais exporter mes déplacements de la région NORD-OUEST.
J'avais mis en paramètres le format GPX compatible GOOGLE.
Le problème qui est survenu: C'est que je me suis déplacé. J'ai donc installé un autre endroit.
Mais pas de chance: Une erreur de ma part? Une volonté de garmin? les exports de mes déplacements ne sont plus au format GPX, mais au format FIT.
J'ai donc modifié le paramétrage pour que cela ne se reproduise plus. Je verrais si cela marche.
En attendant, j'ai un gros problème. Google ne connaît pas le format .FIT
Je ne connais pas d'outils sachant le traiter. Je croyais avoir trouvé.
l14044@PCG-KS215S:~/GPSbabel$ gpsbabel -t -i garmin_fit -f "2017-05-15 01-48-18.fit" -x nuketypes,waypoints,routes -o gpx -F "2017-05-15 01-48-18.gpx"
fit: Definition message reserved bits not zerot: Definition message reserved bits not zeroMais j'ai besoin de récupérer le tracé pour éviter de recommencer cette escalade assez pénible et qui a prit énormément de temps. Le plus pratique, pour moi, serait quand même de trouver un logiciel qui sait convertir de .FIT en .GPX
Le plus amusant c'est que la capture initiale (Dans le répertoire 'curent 'était en .GPX !!!!!!) mais n'est pas conservée et écrasée au déplacement suivant.
Dernière modification par Bougron (Le 16/05/2017, à 00:20)
Hors ligne
#2 Le 16/05/2017, à 08:12
- cqfd93
Re : Garmin OREGON
Bonjour,
Sur cette page, on lit :
GPSBabel version 1.4.4 and later can convert from FIT to GPX. In the GUI it is listed as "Flexible and Interoperable Data Transfer (FIT) Activity filefit".
La version disponible sur ma trusty est la 1.4.3… Tu as bien la 1.4.4 ou plus récente ?
Et sur la même page :
Or you can download into Garmin BaseCamp, Garmin Training Center or Garmin Connect, then export as GPX. Or you can use the online converter on Gpsies.com.
− cqfd93 −
Hors ligne
#3 Le 16/05/2017, à 22:01
- Bougron
Re : Garmin OREGON
Bonsoir.
Merci de ta réponse. A l'issue de l'installation
l14044@PCG-KS215S:~$ gpsbabel -V
GPSBabel Version 1.4.3
l14044@PCG-KS215S:~$ Pour basecamp que j'utilise avec windows XP, Je n'ai pas trop de problèmes.
Je voudrais éviter d'installer windows XP sur cet ordinateur. WINE m'a tellement déçu que je ne fais plus de commentaires lorsque je vois quelqu'un qui a des problème avec wine. Alors qu'il est si simple d'utiliser windows!!!!!!
Running Basecamp 4.2.5 on Linux is possible using wine, see Maps & Navigation > http://www.gpsies.com/upload.do;jsessio … 2B79BA721C.
et pour l'autre produit, Je tombe sur cette grille qui ne me donne pas envie de continuer.
http://www.gpsies.com/upload.do;jsessio … 9BA721C.fe
Je vais probablement recommencer mon escapade après avoir bien revérifier les paramétrages d'exportation.
Dernière modification par Bougron (Le 16/05/2017, à 22:21)
Hors ligne
#4 Le 16/05/2017, à 22:23
- cqfd93
Re : Garmin OREGON
Bonsoir,
Tu peux aussi télécharger une version récente de GPSBabel (1.5.4) là.
− cqfd93 −
Hors ligne
#5 Le 16/05/2017, à 23:17
- Bougron
Re : Garmin OREGON
Bonsoir.
Merci de ton lien.
J'ai donc téléchargé puis j'ai obtenu cela après décompression
l14044@PCG-KS215S:~/Téléchargements/gpsbabel-1.5.4$ ls -ls
total 3880
28 -rw-rw-r-- 1 l14044 l14044 25241 janv. 2 06:05 alan.cc
32 -rw-rw-r-- 1 l14044 l14044 29379 janv. 2 06:05 an1.cc
24 -rw-rw-r-- 1 l14044 l14044 24214 janv. 2 06:05 an1sym.h
12 -rw-rw-r-- 1 l14044 l14044 8424 janv. 2 06:05 arcdist.cc
4 -rw-rw-r-- 1 l14044 l14044 378 janv. 2 06:05 astylerc
4 -rw-rw-r-- 1 l14044 l14044 1633 janv. 2 06:05 AUTHORS
16 -rw-rw-r-- 1 l14044 l14044 12791 janv. 2 06:05 bcr.cc
8 -rw-rw-r-- 1 l14044 l14044 5828 janv. 2 06:05 bend.cc
8 -rw-rw-r-- 1 l14044 l14044 6818 janv. 2 06:05 brauniger_iq.cc
4 -rwxrwxr-x 1 l14044 l14044 1397 janv. 2 06:05 build_and_test
8 -rw-rw-r-- 1 l14044 l14044 7186 janv. 2 06:05 bushnell.cc
4 -rw-rw-r-- 1 l14044 l14044 3194 janv. 2 06:05 bushnell_trl.cc
4 drwxrwxr-x 2 l14044 l14044 4096 janv. 2 06:05 cet
12 -rw-rw-r-- 1 l14044 l14044 11703 janv. 2 06:05 cet.cc
4 -rw-rw-r-- 1 l14044 l14044 2721 janv. 2 06:05 cet.h
12 -rw-rw-r-- 1 l14044 l14044 10866 janv. 2 06:05 cet_util.cc
4 -rw-rw-r-- 1 l14044 l14044 2168 janv. 2 06:05 cet_util.h
4 -rwxrwxr-x 1 l14044 l14044 888 janv. 2 06:05 chkdoc
16 -rw-rw-r-- 1 l14044 l14044 15894 janv. 2 06:05 compegps.cc
44 -rwxrwxr-x 1 l14044 l14044 44851 janv. 2 06:05 config.guess
4 -rw-rw-r-- 1 l14044 l14044 2945 janv. 2 06:05 config.h.in
36 -rwxrwxr-x 1 l14044 l14044 35639 janv. 2 06:05 config.sub
192 -rwxrwxr-x 1 l14044 l14044 194897 janv. 2 06:05 configure
12 -rw-rw-r-- 1 l14044 l14044 11091 janv. 2 06:05 configure.in
20 -rw-rw-r-- 1 l14044 l14044 18003 janv. 2 06:05 COPYING
4 -rw-rw-r-- 1 l14044 l14044 1078 janv. 2 06:05 coverity_model.cc
8 -rw-rw-r-- 1 l14044 l14044 8048 janv. 2 06:05 cst.cc
64 -rw-rw-r-- 1 l14044 l14044 64086 janv. 2 06:05 csv_util.cc
8 -rw-rw-r-- 1 l14044 l14044 4408 janv. 2 06:05 csv_util.h
36 -rw-rw-r-- 1 l14044 l14044 36431 janv. 2 06:05 defs.h
8 -rw-rw-r-- 1 l14044 l14044 4248 janv. 2 06:05 delgpl.cc
4 drwxrwxr-x 2 l14044 l14044 4096 janv. 2 06:05 deprecated
16 -rw-rw-r-- 1 l14044 l14044 13417 janv. 2 06:05 destinator.cc
24 -rw-rw-r-- 1 l14044 l14044 21823 janv. 2 06:05 dg-100.cc
8 -rw-rw-r-- 1 l14044 l14044 6240 janv. 2 06:05 discard.cc
20 -rw-rw-r-- 1 l14044 l14044 17766 janv. 2 06:05 dmtlog.cc
8 -rw-rw-r-- 1 l14044 l14044 6427 janv. 2 06:05 duplicate.cc
8 -rw-rw-r-- 1 l14044 l14044 5162 janv. 2 06:05 easygps.cc
12 -rw-rw-r-- 1 l14044 l14044 10784 janv. 2 06:05 energympro.cc
8 -rw-rw-r-- 1 l14044 l14044 6372 janv. 2 06:05 enigma.cc
40 -rw-rw-r-- 1 l14044 l14044 38450 janv. 2 06:05 exif.cc
4 -rw-rw-r-- 1 l14044 l14044 1542 janv. 2 06:05 explorist_ini.cc
4 -rw-rw-r-- 1 l14044 l14044 256 janv. 2 06:05 explorist_ini.h
8 -rw-rw-r-- 1 l14044 l14044 5435 janv. 2 06:05 f90g_track.cc
4 -rw-rw-r-- 1 l14044 l14044 1359 janv. 2 06:05 fatal.cc
4 -rw-rw-r-- 1 l14044 l14044 1486 janv. 2 06:05 filterdefs.h
4 -rw-rw-r-- 1 l14044 l14044 3565 janv. 2 06:05 filter_skeleton.cc
12 -rw-rw-r-- 1 l14044 l14044 8607 janv. 2 06:05 filter_vecs.cc
8 -rw-rw-r-- 1 l14044 l14044 4530 janv. 2 06:05 format_skeleton.cc
4 -rw-rw-r-- 1 l14044 l14044 1792 janv. 2 06:05 formspec.cc
16 -rw-rw-r-- 1 l14044 l14044 12707 janv. 2 06:05 g7towin.cc
36 -rw-rw-r-- 1 l14044 l14044 33583 janv. 2 06:05 garmin.cc
8 -rw-rw-r-- 1 l14044 l14044 4445 janv. 2 06:05 garmin_device_xml.cc
4 -rw-rw-r-- 1 l14044 l14044 1853 janv. 2 06:05 garmin_device_xml.h
20 -rw-rw-r-- 1 l14044 l14044 18018 janv. 2 06:05 garmin_fit.cc
16 -rw-rw-r-- 1 l14044 l14044 13682 janv. 2 06:05 garmin_fs.cc
8 -rw-rw-r-- 1 l14044 l14044 4790 janv. 2 06:05 garmin_fs.h
40 -rw-rw-r-- 1 l14044 l14044 40744 janv. 2 06:05 garmin_gpi.cc
12 -rw-rw-r-- 1 l14044 l14044 8624 janv. 2 06:05 garmin_gpi.h
32 -rw-rw-r-- 1 l14044 l14044 31022 janv. 2 06:05 garmin_tables.cc
4 -rw-rw-r-- 1 l14044 l14044 3450 janv. 2 06:05 garmin_tables.h
36 -rw-rw-r-- 1 l14044 l14044 34717 janv. 2 06:05 garmin_txt.cc
16 -rw-rw-r-- 1 l14044 l14044 12644 janv. 2 06:05 garmin_xt.cc
28 -rw-rw-r-- 1 l14044 l14044 25736 janv. 2 06:05 gbfile.cc
8 -rw-rw-r-- 1 l14044 l14044 4824 janv. 2 06:05 gbfile.h
8 -rw-rw-r-- 1 l14044 l14044 4561 janv. 2 06:05 gbser.cc
8 -rw-rw-r-- 1 l14044 l14044 4547 janv. 2 06:05 gbser.h
12 -rw-rw-r-- 1 l14044 l14044 11739 janv. 2 06:05 gbser_posix.cc
4 -rw-rw-r-- 1 l14044 l14044 105 janv. 2 06:05 gbser_posix.h
4 -rw-rw-r-- 1 l14044 l14044 1074 janv. 2 06:05 gbser_private.h
12 -rw-rw-r-- 1 l14044 l14044 11514 janv. 2 06:05 gbser_win.cc
4 -rw-rw-r-- 1 l14044 l14044 78 janv. 2 06:05 gbser_win.h
4 -rw-rw-r-- 1 l14044 l14044 1436 janv. 2 06:05 gbsleep.cc
4 -rw-rw-r-- 1 l14044 l14044 263 janv. 2 06:05 gbversion.h
4 -rw-rw-r-- 1 l14044 l14044 311 janv. 2 06:05 gbversion.h.in
48 -rw-rw-r-- 1 l14044 l14044 48670 janv. 2 06:05 gdb.cc
4 -rw-rw-r-- 1 l14044 l14044 2304 janv. 2 06:05 geocaching.loc
8 -rw-rw-r-- 1 l14044 l14044 7124 janv. 2 06:05 geo.cc
8 -rw-rw-r-- 1 l14044 l14044 4782 janv. 2 06:05 geojson.cc
20 -rw-rw-r-- 1 l14044 l14044 16389 janv. 2 06:05 ggv_bin.cc
8 -rw-rw-r-- 1 l14044 l14044 7054 janv. 2 06:05 ggv_log.cc
12 -rw-rw-r-- 1 l14044 l14044 10972 janv. 2 06:05 ggv_ovl.cc
28 -rw-rw-r-- 1 l14044 l14044 28379 janv. 2 06:05 globalsat_sport.cc
4 -rw-rw-r-- 1 l14044 l14044 1164 janv. 2 06:05 globals.cc
8 -rw-rw-r-- 1 l14044 l14044 5005 janv. 2 06:05 glogbook.cc
4 -rw-rw-r-- 1 l14044 l14044 3647 janv. 2 06:05 gnav_trl.cc
8 -rw-rw-r-- 1 l14044 l14044 4322 janv. 2 06:05 googledir.cc
16 -rw-rw-r-- 1 l14044 l14044 13486 janv. 2 06:05 gopal.cc
8 -rw-rw-r-- 1 l14044 l14044 6070 janv. 2 06:05 GPSBabel.pro
4 -rw-rw-r-- 1 l14044 l14044 747 janv. 2 06:05 gpsbabel-sample.ini
4 -rw-rw-r-- 1 l14044 l14044 1246 janv. 2 06:05 gpsbabel.supp
4 drwxrwxr-x 4 l14044 l14044 4096 janv. 2 06:05 GPSBabel.xcodeproj
8 -rw-rw-r-- 1 l14044 l14044 7199 janv. 2 06:05 gpsman
12 -rw-rw-r-- 1 l14044 l14044 9375 janv. 2 06:05 gpsman2
8 -rw-rw-r-- 1 l14044 l14044 4674 janv. 2 06:05 gpssim.cc
8 -rw-rw-r-- 1 l14044 l14044 4236 janv. 2 06:05 gpsutil.cc
56 -rw-rw-r-- 1 l14044 l14044 54801 janv. 2 06:05 gpx.cc
4 -rw-rw-r-- 1 l14044 l14044 907 janv. 2 06:05 gpxval
12 -rw-rw-r-- 1 l14044 l14044 10284 janv. 2 06:05 grtcirc.cc
4 -rw-rw-r-- 1 l14044 l14044 1779 janv. 2 06:05 grtcirc.h
24 -rw-rw-r-- 1 l14044 l14044 21243 janv. 2 06:05 gtm.cc
20 -rw-rw-r-- 1 l14044 l14044 19443 janv. 2 06:05 gtrnctr.cc
4 drwxrwxr-x 4 l14044 l14044 4096 janv. 2 06:05 gui
4 -rwxrwxr-x 1 l14044 l14044 2851 janv. 2 06:05 guibabel
8 -rw-rw-r-- 1 l14044 l14044 4224 janv. 2 06:05 height.cc
328 -rw-rw-r-- 1 l14044 l14044 332109 janv. 2 06:05 height.h
8 -rw-rw-r-- 1 l14044 l14044 7797 janv. 2 06:05 hiketech.cc
8 -rw-rw-r-- 1 l14044 l14044 7890 janv. 2 06:05 holux.cc
4 -rw-rw-r-- 1 l14044 l14044 3457 janv. 2 06:05 holux.h
12 -rw-rw-r-- 1 l14044 l14044 9239 janv. 2 06:05 html.cc
28 -rw-rw-r-- 1 l14044 l14044 28425 janv. 2 06:05 humminbird.cc
28 -rw-rw-r-- 1 l14044 l14044 28421 janv. 2 06:05 igc.cc
8 -rw-rw-r-- 1 l14044 l14044 6280 janv. 2 06:05 ignrando.cc
12 -rw-rw-r-- 1 l14044 l14044 11840 janv. 2 06:05 igo8.cc
4 -rw-rw-r-- 1 l14044 l14044 3421 janv. 2 06:05 ik3d.cc
12 -rw-rw-r-- 1 l14044 l14044 8245 janv. 2 06:05 inifile.cc
4 -rw-rw-r-- 1 l14044 l14044 2048 janv. 2 06:05 inifile.h
12 -rwxrwxr-x 1 l14044 l14044 9233 janv. 2 06:05 install-sh
4 drwxrwxr-x 2 l14044 l14044 4096 janv. 2 06:05 intdoc
52 -rw-rw-r-- 1 l14044 l14044 50071 janv. 2 06:05 internal_styles.cc
8 -rw-rw-r-- 1 l14044 l14044 5670 janv. 2 06:05 interpolate.cc
20 -rw-rw-r-- 1 l14044 l14044 19928 janv. 2 06:05 itracku.cc
4 drwxrwxr-x 2 l14044 l14044 4096 janv. 2 06:05 jeeps
4 -rw-rw-r-- 1 l14044 l14044 2324 janv. 2 06:05 jogmap.cc
8 -rw-rw-r-- 1 l14044 l14044 7655 janv. 2 06:05 jtr.cc
68 -rw-rw-r-- 1 l14044 l14044 67360 janv. 2 06:05 kml.cc
12 -rw-rw-r-- 1 l14044 l14044 9152 janv. 2 06:05 lmx.cc
32 -rw-rw-r-- 1 l14044 l14044 29757 janv. 2 06:05 lowranceusr4.cc
32 -rw-rw-r-- 1 l14044 l14044 29861 janv. 2 06:05 lowranceusr.cc
4 drwxrwxr-x 2 l14044 l14044 4096 janv. 2 06:05 m4
4 drwxrwxr-x 3 l14044 l14044 4096 janv. 2 06:05 mac
4 -rw-rw-r-- 1 l14044 l14044 1602 janv. 2 06:05 magellan.h
8 -rw-rw-r-- 1 l14044 l14044 8127 janv. 2 06:05 maggeo.cc
40 -rw-rw-r-- 1 l14044 l14044 37949 janv. 2 06:05 magproto.cc
24 -rw-rw-r-- 1 l14044 l14044 21045 janv. 2 06:05 main.cc
12 -rwxrwxr-x 1 l14044 l14044 10458 janv. 2 06:05 make-an1sym.pl
52 -rw-rw-r-- 1 l14044 l14044 52920 janv. 2 06:05 Makefile.in
8 -rw-rw-r-- 1 l14044 l14044 7207 janv. 2 06:05 mapasia.cc
4 -rw-rw-r-- 1 l14044 l14044 3725 janv. 2 06:05 mapbar_track.cc
8 -rw-rw-r-- 1 l14044 l14044 4162 janv. 2 06:05 mapfactor.cc
16 -rw-rw-r-- 1 l14044 l14044 13723 janv. 2 06:05 mapsend.cc
4 -rw-rw-r-- 1 l14044 l14044 1396 janv. 2 06:05 mapsend.h
60 -rw-rw-r-- 1 l14044 l14044 61362 janv. 2 06:05 mapsource.cc
4 drwxrwxr-x 4 l14044 l14044 4096 janv. 2 06:05 mingw
4 -rw-rw-r-- 1 l14044 l14044 1326 janv. 2 06:05 mkicondoc.cc
28 -rw-rw-r-- 1 l14044 l14044 26212 janv. 2 06:05 mkshort.cc
4 -rwxrwxr-x 1 l14044 l14044 1303 janv. 2 06:05 mkstyle.sh
40 -rw-rw-r-- 1 l14044 l14044 37576 janv. 2 06:05 mmo.cc
4 drwxrwxr-x 2 l14044 l14044 4096 janv. 2 06:05 msvc
16 -rw-rw-r-- 1 l14044 l14044 14889 janv. 2 06:05 mtk_locus.cc
52 -rw-rw-r-- 1 l14044 l14044 49300 janv. 2 06:05 mtk_logger.cc
8 -rw-rw-r-- 1 l14044 l14044 4159 janv. 2 06:05 mynav.cc
8 -rw-rw-r-- 1 l14044 l14044 5792 janv. 2 06:05 navicache.cc
12 -rw-rw-r-- 1 l14044 l14044 8889 janv. 2 06:05 naviguide.cc
32 -rw-rw-r-- 1 l14044 l14044 30569 janv. 2 06:05 navilink.cc
8 -rw-rw-r-- 1 l14044 l14044 7366 janv. 2 06:05 navilink.h
4 -rw-rw-r-- 1 l14044 l14044 3396 janv. 2 06:05 navitel.cc
12 -rw-rw-r-- 1 l14044 l14044 8537 janv. 2 06:05 netstumbler.cc
40 -rw-rw-r-- 1 l14044 l14044 39443 janv. 2 06:05 nmea.cc
8 -rw-rw-r-- 1 l14044 l14044 6468 janv. 2 06:05 nmn4.cc
4 -rw-rw-r-- 1 l14044 l14044 1684 janv. 2 06:05 nukedata.cc
24 -rw-rw-r-- 1 l14044 l14044 23774 janv. 2 06:05 osm.cc
24 -rw-rw-r-- 1 l14044 l14044 23431 janv. 2 06:05 ozi.cc
8 -rw-rw-r-- 1 l14044 l14044 7870 janv. 2 06:05 parse.cc
12 -rw-rw-r-- 1 l14044 l14044 12262 janv. 2 06:05 pcx.cc
8 -rw-rw-r-- 1 l14044 l14044 4895 janv. 2 06:05 pocketfms_bc.cc
8 -rw-rw-r-- 1 l14044 l14044 4974 janv. 2 06:05 pocketfms_fp.cc
4 -rw-rw-r-- 1 l14044 l14044 3562 janv. 2 06:05 pocketfms_wp.cc
12 -rw-rw-r-- 1 l14044 l14044 11181 janv. 2 06:05 polygon.cc
8 -rw-rw-r-- 1 l14044 l14044 5145 janv. 2 06:05 position.cc
20 -rw-rw-r-- 1 l14044 l14044 20018 janv. 2 06:05 psitrex.cc
4 -rwxrwxr-x 1 l14044 l14044 128 janv. 2 06:05 ptesto
8 -rw-rw-r-- 1 l14044 l14044 5783 janv. 2 06:05 queue.cc
4 -rw-rw-r-- 1 l14044 l14044 2040 janv. 2 06:05 queue.h
8 -rw-rw-r-- 1 l14044 l14044 5446 janv. 2 06:05 radius.cc
8 -rw-rw-r-- 1 l14044 l14044 6184 janv. 2 06:05 random.cc
16 -rw-rw-r-- 1 l14044 l14044 13457 janv. 2 06:05 raymarine.cc
8 -rw-rw-r-- 1 l14044 l14044 5685 janv. 2 06:05 README.contrib
8 -rw-rw-r-- 1 l14044 l14044 4935 janv. 2 06:05 README.igc
4 -rw-rw-r-- 1 l14044 l14044 1591 janv. 2 06:05 README.mapconverter
4 -rw-rw-r-- 1 l14044 l14044 710 janv. 2 06:05 README.md
4 -rw-rw-r-- 1 l14044 l14044 2081 janv. 2 06:05 README.xmapwpt
12 drwxrwxr-x 6 l14044 l14044 12288 janv. 2 06:05 reference
4 -rw-rw-r-- 1 l14044 l14044 2073 janv. 2 06:05 reverse_route.cc
8 -rw-rw-r-- 1 l14044 l14044 7154 janv. 2 06:05 rgbcolors.cc
16 -rw-rw-r-- 1 l14044 l14044 14840 janv. 2 06:05 route.cc
12 -rw-rw-r-- 1 l14044 l14044 12093 janv. 2 06:05 saroute.cc
12 -rw-rw-r-- 1 l14044 l14044 8587 janv. 2 06:05 sbn.cc
4 -rw-rw-r-- 1 l14044 l14044 3258 janv. 2 06:05 sbp.cc
4 -rw-rw-r-- 1 l14044 l14044 2419 janv. 2 06:05 session.cc
4 -rw-rw-r-- 1 l14044 l14044 1415 janv. 2 06:05 session.h
12 -rw-rw-r-- 1 l14044 l14044 8678 janv. 2 06:05 shape.cc
4 drwxrwxr-x 2 l14044 l14044 4096 janv. 2 06:05 shapelib
20 -rw-rw-r-- 1 l14044 l14044 17030 janv. 2 06:05 shortname.cc
8 -rw-rw-r-- 1 l14044 l14044 8054 janv. 2 06:05 skyforce.cc
52 -rw-rw-r-- 1 l14044 l14044 50110 janv. 2 06:05 skytraq.cc
16 -rw-rw-r-- 1 l14044 l14044 12788 janv. 2 06:05 smplrout.cc
4 -rw-rw-r-- 1 l14044 l14044 2611 janv. 2 06:05 sort.cc
4 drwxrwxr-x 3 l14044 l14044 4096 janv. 2 06:05 src
8 -rw-rw-r-- 1 l14044 l14044 6423 janv. 2 06:05 stackfilter.cc
20 -rw-rw-r-- 1 l14044 l14044 18862 janv. 2 06:05 stmsdf.cc
8 -rw-rw-r-- 1 l14044 l14044 7350 janv. 2 06:05 stmwpp.cc
28 -rw-rw-r-- 1 l14044 l14044 26939 janv. 2 06:05 strptime.c
4 -rw-rw-r-- 1 l14044 l14044 1177 janv. 2 06:05 strptime.h
4 drwxrwxr-x 3 l14044 l14044 4096 janv. 2 06:05 style
12 -rw-rw-r-- 1 l14044 l14044 8689 janv. 2 06:05 subrip.cc
4 -rw-rw-r-- 1 l14044 l14044 1872 janv. 2 06:05 swapdata.cc
12 -rw-rw-r-- 1 l14044 l14044 8228 janv. 2 06:05 tef_xml.cc
4 -rw-rw-r-- 1 l14044 l14044 3060 janv. 2 06:05 teletype.cc
8 -rwxrwxr-x 1 l14044 l14044 7360 janv. 2 06:05 test-all
4 -rwxrwxr-x 1 l14044 l14044 1009 janv. 2 06:05 testc
4 -rwxrwxr-x 1 l14044 l14044 3138 janv. 2 06:05 testo
4 drwxrwxr-x 3 l14044 l14044 4096 janv. 2 06:05 testo.d
4 -rwxrwxr-x 1 l14044 l14044 3396 janv. 2 06:05 testw
8 -rw-rw-r-- 1 l14044 l14044 7885 janv. 2 06:05 text.cc
8 -rw-rw-r-- 1 l14044 l14044 7725 janv. 2 06:05 tiger.cc
8 -rw-rw-r-- 1 l14044 l14044 7198 janv. 2 06:05 tmpro.cc
16 -rw-rw-r-- 1 l14044 l14044 12973 janv. 2 06:05 tomtom.cc
4 drwxrwxr-x 3 l14044 l14044 4096 janv. 2 06:05 tools
4 -rwxrwxr-x 1 l14044 l14044 668 janv. 2 06:05 torture_test
8 -rw-rw-r-- 1 l14044 l14044 7766 janv. 2 06:05 tpg.cc
60 -rw-rw-r-- 1 l14044 l14044 59415 janv. 2 06:05 tpo.cc
36 -rw-rw-r-- 1 l14044 l14044 36124 janv. 2 06:05 trackfilter.cc
8 -rw-rw-r-- 1 l14044 l14044 6424 janv. 2 06:05 transform.cc
56 -rw-rw-r-- 1 l14044 l14044 54234 janv. 2 06:05 unicsv.cc
4 -rw-rw-r-- 1 l14044 l14044 2799 janv. 2 06:05 units.cc
40 -rw-rw-r-- 1 l14044 l14044 38315 janv. 2 06:05 util.cc
8 -rw-rw-r-- 1 l14044 l14044 4646 janv. 2 06:05 util_crc.cc
16 -rw-rw-r-- 1 l14044 l14044 13712 janv. 2 06:05 v900.cc
8 -rw-rw-r-- 1 l14044 l14044 4258 janv. 2 06:05 validate.cc
4 -rw-rw-r-- 1 l14044 l14044 3423 janv. 2 06:05 vcf.cc
36 -rw-rw-r-- 1 l14044 l14044 33515 janv. 2 06:05 vecs.cc
4 -rw-rw-r-- 1 l14044 l14044 3328 janv. 2 06:05 vidaone.cc
12 -rw-rw-r-- 1 l14044 l14044 9475 janv. 2 06:05 vitosmt.cc
4 -rw-rw-r-- 1 l14044 l14044 3572 janv. 2 06:05 vitovtt.cc
8 -rw-rw-r-- 1 l14044 l14044 6572 janv. 2 06:05 vpl.cc
4 -rwxrwxr-x 1 l14044 l14044 999 janv. 2 06:05 vtesto
20 -rw-rw-r-- 1 l14044 l14044 16898 janv. 2 06:05 waypt.cc
28 -rw-rw-r-- 1 l14044 l14044 26175 janv. 2 06:05 wbt-200.cc
8 -rw-rw-r-- 1 l14044 l14044 6419 janv. 2 06:05 wfff_xml.cc
4 drwxrwxr-x 2 l14044 l14044 4096 janv. 2 06:05 win32
4 -rw-rw-r-- 1 l14044 l14044 3110 janv. 2 06:05 wintec_tes.cc
24 -rw-rw-r-- 1 l14044 l14044 20946 janv. 2 06:05 xcsv.cc
12 -rw-rw-r-- 1 l14044 l14044 11825 janv. 2 06:05 xcsv_tokens.gperf
4 -rw-rw-r-- 1 l14044 l14044 2415 janv. 2 06:05 xcsv_tokens.in
36 -rw-rw-r-- 1 l14044 l14044 33383 janv. 2 06:05 xhtmlent.cc
4 drwxrwxr-x 5 l14044 l14044 4096 janv. 2 06:05 xmldoc
8 -rw-rw-r-- 1 l14044 l14044 6710 janv. 2 06:05 xmlgeneric.cc
4 -rw-rw-r-- 1 l14044 l14044 1593 janv. 2 06:05 xmlgeneric.h
4 -rw-rw-r-- 1 l14044 l14044 3455 janv. 2 06:05 xmltag.cc
12 -rw-rw-r-- 1 l14044 l14044 9298 janv. 2 06:05 xol.cc
4 -rw-rw-r-- 1 l14044 l14044 2901 janv. 2 06:05 yahoo.cc
4 drwxrwxr-x 3 l14044 l14044 4096 janv. 2 06:05 zlib
l14044@PCG-KS215S:~/Téléchargements/gpsbabel-1.5.4$J'ai bien lu le fichier Readme qui semble traiter mon problème.
l14044@PCG-KS215S:~/Téléchargements/gpsbabel-1.5.4$ cat README.mapconverter
Mapconverter is an application used to create userland maps and map data for
Mapopolis.com's Mapopolis program. The mapconverter format is essentially
waypoint data prepared in a format that the mapconverter application will
accept.
The steps for using GPSBabel and Mapconverter go something like this:
Step 1: Create a mapconverter file using gpsbabel.
./gpsbabel -i geo -f geocaching.loc -o mapconverter -F foo.txt
Step 2: Launch mapconverter.exe and choose foo.txt as your input file.
Click the begin button to have mapconverter process foo.txt.
If all goes successfully, you should have a file called "foo.pdb" ready
for syncing with your PDA. Put it wherever Mapopolis thinks it should be
on your PDA.
NOTES:
o GPSBabel will write the name of its own output file in the output file
it creates as the input for Mapconverter. Mapconverter will replace
the extension of this filename with ".pdb".
o The PocketPC version of Mapopolis doesn't notice files with the ".pdb"
extension. To make this work, change the extension to ".mlp" when
copying the mapconverter output to your PocketPC PDA.
o Mapconverter only works with Mapopolis version 3.x. Mapopolis version
4 will refuse to load mapconverter maps. There is no known work-around
for this at the time of this writing.
o Mapconverter is no longer available from the Mapopolis website. If you
need a copy of mapconverter, ask on your local GPS Software discussion
forum and I'm sure someone will have it. As far as I know, It was never
actually acknowledged/supported by Mapopolis to begin with.
l14044@PCG-KS215S:~/Téléchargements/gpsbabel-1.5.4$ En fait, J'ai du rater ce qu'il faut faire après avoir téléchargé la nouvelle version et je suis incapable de trouver, dans ce qui est téléchargé, les actions qu'il faut faire.
Dernière modification par Bougron (Le 16/05/2017, à 23:19)
Hors ligne
#6 Le 16/05/2017, à 23:30
- cqfd93
Re : Garmin OREGON
Il faut l'installer, je suppose en exécutant install-sh. Avant de faire ça, tu devrais peut-être désinstaller ton ancienne version.
Et si ce type d'installation ne t'emballe pas, tu peux essayer d'exécuter la version windows sous wine.
− cqfd93 −
Hors ligne
#7 Le 17/05/2017, à 00:21
- Bougron
Re : Garmin OREGON
Je découvre... Et je n'en pense pas du bien...
l14044@PCG-KS215S:~/Téléchargements/gpsbabel-1.5.4$ pg /home/l14044/Téléchargements/gpsbabel-1.5.4/install-sh
#!/bin/sh
# install - install a program, script, or datafile
scriptversion=2005-05-14.22
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
chmodcmd="$chmodprog 0755"
chowncmd=
chgrpcmd=
stripcmd=
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=
dst=
dir_arg=
dstarg=
no_target_directory=
usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
In the 1st form, copy SRCFILE to DSTFILE.
In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.
Options:
-c (ignored)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
--help display this help and exit.
--version display version info and exit.
Environment variables override the default commands:
CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
"
while test -n "$1"; do
case $1 in
-c) shift
continue;;
-d) dir_arg=true
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
--help) echo "$usage"; exit $?;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-s) stripcmd=$stripprog
shift
continue;;
-t) dstarg=$2
shift
shift
continue;;
-T) no_target_directory=true
shift
continue;;
--version) echo "$0 $scriptversion"; exit $?;;
*) # When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
test -n "$dir_arg$dstarg" && break
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
if test -n "$dstarg"; then
# $@ is not empty: it contains at least $arg.
set fnord "$@" "$dstarg"
shift # fnord
fi
shift # arg
dstarg=$arg
done
break;;
esac
done
if test -z "$1"; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
fi
# It's OK to call `install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
for src
do
# Protect names starting with `-'.
case $src in
-*) src=./$src ;;
esac
if test -n "$dir_arg"; then
dst=$src
src=
if test -d "$dst"; then
mkdircmd=:
chmodcmd=
else
mkdircmd=$mkdirprog
fi
else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if test ! -f "$src" && test ! -d "$src"; then
echo "$0: $src does not exist." >&2
exit 1
fi
if test -z "$dstarg"; then
echo "$0: no destination specified." >&2
exit 1
fi
dst=$dstarg
# Protect names starting with `-'.
case $dst in
-*) dst=./$dst ;;
esac
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
if test -n "$no_target_directory"; then
echo "$0: $dstarg: Is a directory" >&2
exit 1
fi
dst=$dst/`basename "$src"`
fi
fi
# This sed command emulates the dirname command.
dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# Skip lots of stat calls in the usual case.
if test ! -d "$dstdir"; then
defaultIFS='
'
IFS="${IFS-$defaultIFS}"
oIFS=$IFS
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
shift
IFS=$oIFS
pathcomp=
while test $# -ne 0 ; do
pathcomp=$pathcomp$1
shift
if test ! -d "$pathcomp"; then
$mkdirprog "$pathcomp"
# mkdir can fail with a `File exist' error in case several
# install-sh are creating the directory concurrently. This
# is OK.
test -d "$pathcomp" || exit
fi
pathcomp=$pathcomp/
done
fi
if test -n "$dir_arg"; then
$doit $mkdircmd "$dst" \
&& { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
&& { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
&& { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
else
dstfile=`basename "$dst"`
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
rmtmp=$dstdir/_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
trap '(exit $?); exit' 1 2 13 15
# Copy the file name to the temp name.
$doit $cpprog "$src" "$dsttmp" &&
# and set any options; do chmod last to preserve setuid bits.
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
&& { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
&& { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
&& { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
# Now rename the file to the real destination.
{ $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
|| {
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
# Now remove or move aside any old file at destination location.
# We try this two ways since rm can't unlink itself on some
# systems and the destination file might be busy for other
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
if test -f "$dstdir/$dstfile"; then
$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
|| $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
|| {
echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
(exit 1); exit 1
}
else
:
fi
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
}
}
fi || { (exit 1); exit 1; }
done
# The final little trick to "correctly" pass the exit status to the exit trap.
{
(exit 0); exit 0
}
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-end: "$"
# End:
l14044@PCG-KS215S:~/Téléchargements/gpsbabel-1.5.4$
l14044@PCG-KS215S:~/Téléchargements/gpsbabel-1.5.4$ /home/l14044/Téléchargements/gpsbabel-1.5.4/install-sh
/home/l14044/Téléchargements/gpsbabel-1.5.4/install-sh: no input file specified.
l14044@PCG-KS215S:~/Téléchargements/gpsbabel-1.5.4$ l14044@PCG-KS215S:~/Téléchargements/gpsbabel-1.5.4$
l14044@PCG-KS215S:~/Téléchargements/gpsbabel-1.5.4$ /home/l14044/Téléchargements/gpsbabel-1.5.4/install-sh GARMIN
/home/l14044/Téléchargements/gpsbabel-1.5.4/install-sh: no input file specified.
l14044@PCG-KS215S:~/Téléchargements/gpsbabel-1.5.4$ l14044@PCG-KS215S:~/Téléchargements/gpsbabel-1.5.4$ /home/l14044/Téléchargements/gpsbabel-1.5.4/build_and_test
+ uname -a
Linux PCG-KS215S 4.2.0-42-generic #49~14.04.1-Ubuntu SMP Wed Jun 29 20:22:18 UTC 2016 i686 i686 i686 GNU/Linux
+ '[' -e /etc/system-release ']'
+ '[' -e /etc/os-release ']'
+ cat /etc/os-release
NAME="Ubuntu"
VERSION="14.04.5 LTS, Trusty Tahr"
ID=ubuntu
ID_LIKE=debian
PRETTY_NAME="Ubuntu 14.04.5 LTS"
VERSION_ID="14.04"
HOME_URL="http://www.ubuntu.com/"
SUPPORT_URL="http://help.ubuntu.com/"
BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/"
+ git --no-pager log -n 1
/home/l14044/Téléchargements/gpsbabel-1.5.4/build_and_test: ligne 14: git : commande introuvable
l14044@PCG-KS215S:~/Téléchargements/gpsbabel-1.5.4$ head -20 /home/l14044/Téléchargements/gpsbabel-1.5.4/build_and_test
#!/bin/bash -ex
#
# this script is triggered by SCM changes and is run on the build server.
# output is conditionally mailed to gpsbabel-code.
#
# echo some system info to log
uname -a
if [ -e /etc/system-release ]; then
cat /etc/system-release
fi
if [ -e /etc/os-release ]; then
cat /etc/os-release
fi
git --no-pager log -n 1
# the timestamps from a svn co are unpredicatble.
# this can cause problems if targets are checked into svn.
# some of our targets are part of the svn repository to allow a
# minimal set of build tools to be used.
# touch these targets to make sure they aren't considered out of date.
touch configure
l14044@PCG-KS215S:~/Téléchargements/gpsbabel-1.5.4$ Dernière modification par Bougron (Le 17/05/2017, à 09:01)
Hors ligne
#8 Le 17/05/2017, à 08:58
- cqfd93
Re : Garmin OREGON
Bonjour,
Bougron a écrit :
Je découvre... Et je n'en pense pas du bien...
Moi aussi je découvre, je ne suis pas une habituée de la compilation…
Sur la page de téléchargement que je t'ai donnée, il y a ça :
GPSBabel for Linux and other operating systems is a source distribution. You can choose between the release tar image here or the GPSBabel git repo and proceed to build.
Et là, on voit d'une part que Qt est nécessaire (mais il est certainement déjà installé sur ton système) et d'autre part qu'il fait faire un :
./configure && make− cqfd93 −
Hors ligne
#9 Le 17/05/2017, à 09:11
- Bougron
Re : Garmin OREGON
Merci de ton retour
En lisant plus en détail la doc ( https://www.gpsbabel.org/htmldoc-1.5.4/Source.html ), Je suis aussi arrivé à tenter cette commande
l14044@PCG-KS215S:~/Téléchargements/gpsbabel-1.5.4$ ./configure && make
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking whether g++ supports C++11 features by default... no
checking whether g++ supports C++11 features with -std=gnu++11... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking whether make sets $(MAKE)... yes
checking how to run the C++ preprocessor... g++ -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking whether byte ordering is bigendian... no
checking for cos in -lm... yes
checking whether to support shapefiles... yes
checking whether to support Palm/OS pdb formats... yes
checking whether to support csv formats... yes
checking whether to support maximum number of formats... yes
checking whether to support filters... yes
checking whether to support zlib... using included version
checking for qmake-qt5... no
checking for qmake... no
checking for lupdate-qt5... no
checking for lupdate... no
checking for lrelease-qt5... no
checking for lrelease... no
configure: error: Qt5.2 or higher is required, but was not found
l14044@PCG-KS215S:~/Téléchargements/gpsbabel-1.5.4$Je suis actuellement sous ubuntu.Quittes à attendre d'être de retour dans mon environnement.
Je viens quand même de lancer les commandes
sudo apt update
sudo apt upgradeet donc
l14044@PCG-KS215S:~$ yum search qt
Attention : aucune correspondance trouvée pour : qt
Aucune correspondance trouvée
l14044@PCG-KS215S:~$ Reste à suivre le conseil que tu viens de donner
Dernière modification par Bougron (Le 17/05/2017, à 09:44)
Hors ligne
#10 Le 17/05/2017, à 09:42
- cqfd93
Re : Garmin OREGON
Au vu de la fin du retour de ./configure && make et d'après ce que je vois dans synaptic (je suis sous 14.04.5), je te suggérerais d'installer qt5-qmake. Mes compétences n'iront pas beaucoup plus loin, j'espère que d'autre membres vont pouvoir prendre le relais.
Et sinon, je renouvelle ma suggestion d'essayer la version windows sous wine (même si tu n'aimes pas trop wine).
− cqfd93 −
Hors ligne
#11 Le 17/05/2017, à 09:53
- Bougron
Re : Garmin OREGON
Je ne sais pas ce que j'ai raté. Mais je vais continuer plus tard ce soir.
l14044@PCG-KS215S:~$ sudo apt install qt5-qmake
[sudo] password for l14044:
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
libntdb1 linux-headers-4.2.0-41 linux-headers-4.2.0-41-generic
linux-image-4.2.0-41-generic linux-image-extra-4.2.0-41-generic
Veuillez utiliser « apt-get autoremove » pour les supprimer.
Les paquets supplémentaires suivants seront installés :
qtchooser
Paquets suggérés :
qt4-default qt5-default
Les NOUVEAUX paquets suivants seront installés :
qt5-qmake qtchooser
0 mis à jour, 2 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 1 270 ko dans les archives.
Après cette opération, 5 074 ko d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n]
Réception de : 1 http://fr.archive.ubuntu.com/ubuntu/ trusty/main qtchooser i386 39-g4717841-3 [18,5 kB]
Réception de : 2 http://fr.archive.ubuntu.com/ubuntu/ trusty-updates/main qt5-qmake i386 5.2.1+dfsg-1ubuntu14.3 [1 252 kB]
1 270 ko réceptionnés en 11s (113 ko/s)
Sélection du paquet qtchooser précédemment désélectionné.
(Lecture de la base de données... 164146 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../qtchooser_39-g4717841-3_i386.deb ...
Dépaquetage de qtchooser (39-g4717841-3) ...
Sélection du paquet qt5-qmake:i386 précédemment désélectionné.
Préparation du dépaquetage de .../qt5-qmake_5.2.1+dfsg-1ubuntu14.3_i386.deb ...
Dépaquetage de qt5-qmake:i386 (5.2.1+dfsg-1ubuntu14.3) ...
Traitement des actions différées (« triggers ») pour man-db (2.6.7.1-1ubuntu1) ...
Paramétrage de qtchooser (39-g4717841-3) ...
Paramétrage de qt5-qmake:i386 (5.2.1+dfsg-1ubuntu14.3) ...
l14044@PCG-KS215S:~$
l14044@PCG-KS215S:~$
l14044@PCG-KS215S:~$ yum search qt
Attention : aucune correspondance trouvée pour : qt
Aucune correspondance trouvée
l14044@PCG-KS215S:~$ yum search qt5
Attention : aucune correspondance trouvée pour : qt5
Aucune correspondance trouvée
l14044@PCG-KS215S:~$ l14044@PCG-KS215S:~/Téléchargements$ cd *4
l14044@PCG-KS215S:~/Téléchargements/gpsbabel-1.5.4$ ./configure && make
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking whether g++ supports C++11 features by default... no
checking whether g++ supports C++11 features with -std=gnu++11... yes
checking for a BSD-compatible install... /usr/bin/install -c
checking whether make sets $(MAKE)... yes
checking how to run the C++ preprocessor... g++ -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking whether byte ordering is bigendian... no
checking for cos in -lm... yes
checking whether to support shapefiles... yes
checking whether to support Palm/OS pdb formats... yes
checking whether to support csv formats... yes
checking whether to support maximum number of formats... yes
checking whether to support filters... yes
checking whether to support zlib... using included version
checking for qmake-qt5... no
checking for qmake... qmake
checking for lupdate-qt5... no
checking for lupdate... lupdate
checking for lrelease-qt5... no
checking for lrelease... lrelease
qmake: could not exec '/usr/lib/i386-linux-gnu/qt4/bin/qmake': No such file or directory
./configure: line 5069: test: : integer expression expected
qmake: could not exec '/usr/lib/i386-linux-gnu/qt4/bin/qmake': No such file or directory
qmake: could not exec '/usr/lib/i386-linux-gnu/qt4/bin/qmake': No such file or directory
checking for libusb... checking for libusb-config... false
checking for Linux HID interface... yes
checking for reduce relocations... unknown
checking for random stuff to make you feel better... failed
checking for efence...
checking for docdir... checking stdarg.h usability... yes
checking stdarg.h presence... yes
checking for stdarg.h... yes
checking for nanosleep... yes
checking for sleep... yes
checking for uname... yes
checking for glob... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating gbversion.h
config.status: creating gui/setup.iss
config.status: creating xmldoc/makedoc
config.status: creating tools/mkcapabilities
config.status: creating win32/gpsbabel.rc
config.status: creating jeeps/Makefile
config.status: creating shapelib/Makefile
config.status: creating zlib/empty
config.status: creating gui/makelinuxdist.sh
config.status: creating config.h
g++ -g -O2 -std=gnu++11 -Wall -c -I. -I -DHAVE_CONFIG_H -DNEW_STRINGS main.cc -o main.o
main.cc:20:29: fatal error: QtCore/QTextCodec: Aucun fichier ou dossier de ce type
#include <QtCore/QTextCodec>
^
compilation terminated.
make: *** [main.o] Erreur 1
l14044@PCG-KS215S:~/Téléchargements/gpsbabel-1.5.4$ l14044@PCG-KS215S:/usr/lib/i386-linux-gnu$ ls -ls | grep qt
4 drwxr-xr-x 3 root root 4096 nov. 21 08:21 qt4
4 drwxr-xr-x 4 root root 4096 mai 17 09:46 qt5
4 drwxr-xr-x 2 root root 4096 nov. 21 08:21 qtchooser
4 drwxr-xr-x 3 root root 4096 nov. 21 08:21 qt-default
l14044@PCG-KS215S:/usr/lib/i386-linux-gnu$ et !!!
l14044@PCG-KS215S:/usr/lib/i386-linux-gnu/qt4$ ls -ls
total 4
4 drwxr-xr-x 12 root root 4096 nov. 21 08:21 plugins
l14044@PCG-KS215S:/usr/lib/i386-linux-gnu/qt4$ Je vais rebooter ce soir pour voir si ..... au cas ou cela n'apparaitrait qu'après le boot
...
Dernière modification par Bougron (Le 17/05/2017, à 10:01)
Hors ligne
#12 Le 17/05/2017, à 10:08
- cqfd93
Re : Garmin OREGON
Je déclare forfait !
− cqfd93 −
Hors ligne
#13 Le 17/05/2017, à 23:01
- Bougron
Re : Garmin OREGON
Bonsoir.
Ne t'inquiètes pas. Dans une semaine, J'aurais à ma disposition windows XP
Un langage commun !!!!!!!! https://fr.wikipedia.org/wiki/Tour_de_Babel
Dernière modification par Bougron (Le 17/05/2017, à 23:01)
Hors ligne
#14 Le 18/06/2017, à 14:11
- Bougron
Re : Garmin OREGON
Bonjour
Avec un peu de retard, je donne quelques nouvelles.
D'abord pour le problème, j'ai finalement décidé de recommencer le trajet en exportant au format GPX. Heureusement car sous windows XP, je n'ai pas réussi à lire le format FIT.
A l'instant, je viens de brancher l'appareil. Voici la trace de la détection par le noyau.
[ 5986.294779] usb 3-1: new full-speed USB device number 12 using xhci_hcd
[ 5986.518792] usb 3-1: new high-speed USB device number 13 using xhci_hcd
[ 5986.630912] usb 3-1: Device not responding to setup address.
[ 5986.834832] usb 3-1: Device not responding to setup address.
[ 5987.038776] usb 3-1: device not accepting address 13, error -71
[ 5999.582372] usb 3-1: new high-speed USB device number 15 using xhci_hcd
[ 5999.710959] usb 3-1: New USB device found, idVendor=091e, idProduct=29d0
[ 5999.710965] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=5
[ 5999.710968] usb 3-1: SerialNumber: 0000ea579e4d
[ 5999.711558] usb-storage 3-1:1.0: USB Mass Storage device detected
[ 5999.711925] scsi host8: usb-storage 3-1:1.0
[ 6000.711160] scsi 8:0:0:0: Direct-Access Garmin GARMIN Flash 1.00 PQ: 0 ANSI: 5
[ 6000.711476] scsi 8:0:0:1: Direct-Access Garmin GARMIN Card 1.00 PQ: 0 ANSI: 5
[ 6000.711960] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 6000.712305] sd 8:0:0:1: Attached scsi generic sg3 type 0
[ 6000.712757] sd 8:0:0:0: [sdb] 7450624 512-byte logical blocks: (3.81 GB/3.55 GiB)
[ 6000.713090] sd 8:0:0:0: [sdb] Write Protect is off
[ 6000.713094] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 6000.713275] sd 8:0:0:1: [sdc] 3874816 512-byte logical blocks: (1.98 GB/1.85 GiB)
[ 6000.713486] sd 8:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6000.713695] sd 8:0:0:1: [sdc] Write Protect is off
[ 6000.713701] sd 8:0:0:1: [sdc] Mode Sense: 23 00 00 00
[ 6000.714318] sd 8:0:0:1: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6000.720578] sdb:
[ 6000.724178] sdc: sdc1
[ 6000.724946] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 6000.727014] sd 8:0:0:1: [sdc] Attached SCSI removable disk
u16041@u16041:~$On y voit donc le périphérique SDB sans partition qui est le logiciel du fabriquant et la partition SDC1 qui est la carte de France.
donc un extrait de BLKID et de FDISK
/dev/sdb: LABEL="GARMIN" UUID="3B97-B9D0" TYPE="vfat"
/dev/sdc1: LABEL="CARTESD" UUID="B80F-DF22" TYPE="vfat"
...
Disque /dev/sdb : 3,6 GiB, 3814719488 octets, 7450624 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000
Disque /dev/sdc : 1,9 GiB, 1983905792 octets, 3874816 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000
Périphérique Amorçage Start Fin Secteurs Size Id Type
/dev/sdc1 128 3874815 3874688 1,9G b W95 FAT32
u16041@u16041:~$ et les commandes de montages et de vérifications
u16041@u16041:~$ sudo mkdir /mnt/SDC1
u16041@u16041:~$ sudo mkdir /mnt/SDB
u16041@u16041:~$ sudo mount -v /dev/sdb /mnt/SDB
mount: /dev/sdb mounted on /mnt/SDB.
u16041@u16041:~$ sudo ls -ls /mnt/SDB
total 2136964
4 -rwxr-xr-x 1 root root 96 déc. 31 2024 autorun.inf
4 drwxr-xr-x 3 root root 4096 avril 9 11:19 DCIM
4 drwxr-xr-x 25 root root 4096 avril 27 2016 Garmin
1254528 -rwxr-xr-x 1 root root 1284636672 mai 6 18:37 gmapsupp.imgFrance
13388 -rwxr-xr-x 1 root root 13707264 mai 13 19:36 gmapsupp.imgNice
864192 -rwxr-xr-x 1 root root 884932608 août 31 2015 gmapsupp.imgNordOuest
4836 -rwxr-xr-x 1 root root 4950016 mai 11 18:06 gmapsupp.imgToulon
4 drwxr-xr-x 3 root root 4096 avril 10 18:19 http
4 drwxr-xr-x 2 root root 4096 avril 11 20:49 System Volume Information
u16041@u16041:~$ sudo mount -v /dev/sdc1 /mnt/SDC1
mount: /dev/sdc1 mounted on /mnt/SDC1.
u16041@u16041:~$ sudo ls -ls /mnt/SDC1
total 12
4 drwxr-xr-x 3 root root 4096 mai 19 17:40 garmin
4 -rwxr-xr-x 1 root root 37 avril 11 19:18 Id.txt
4 drwxr-xr-x 2 root root 4096 avril 11 20:49 System Volume Information
u16041@u16041:~$ cd /mnt/SDB/Garmin
u16041@u16041:/mnt/SDB/Garmin$ ls -ls
total 50576
8 drwxr-xr-x 2 root root 8192 mai 11 17:33 Activities
4 drwxr-xr-x 6 root root 4096 déc. 31 2024 Apps
4 drwxr-xr-x 2 root root 4096 déc. 31 1979 BirdsEye
4 drwxr-xr-x 2 root root 4096 avril 11 22:28 CIQDevData
4 drwxr-xr-x 2 root root 4096 déc. 31 2024 CustomMaps
4 drwxr-xr-x 2 root root 4096 déc. 31 2024 CustomSymbols
4 -rwxr-xr-x 1 root root 259 juin 18 03:53 Device.fit
4 drwxr-xr-x 2 root root 4096 déc. 31 1979 ExtData
4 drwxr-xr-x 3 root root 4096 déc. 31 2024 Filters
4 -rwxr-xr-x 1 root root 14 avril 27 2016 fs_image.ver
20 -rwxr-xr-x 1 root root 17829 juin 18 03:53 GarminDevice.xml
28 -rwxr-xr-x 1 root root 25214 sept. 12 2007 Garmintriangletm.ico
4 drwxr-xr-x 2 root root 4096 déc. 31 2024 GGZ
49808 -rwxr-xr-x 1 root root 51003392 mars 14 2011 gmapbmap.img
4 -rwxr-xr-x 1 root root 4 juil. 30 2016 gmapbmap.sum
592 -rwxr-xr-x 1 root root 603136 avril 11 18:41 gmaptz.img
4 drwxr-xr-x 2 root root 4096 déc. 31 2024 GPS
8 drwxr-xr-x 5 root root 8192 mai 17 23:34 GPX
4 drwxr-xr-x 2 root root 4096 juil. 31 2016 NewFiles
4 drwxr-xr-x 2 root root 4096 déc. 31 2024 Profiles
4 drwxr-xr-x 2 root root 4096 déc. 31 1979 RemoteSW
8 drwxr-xr-x 2 root root 8192 avril 9 12:49 scrn
4 drwxr-xr-x 2 root root 4096 déc. 31 2024 Settings
4 drwxr-xr-x 2 root root 4096 déc. 31 2024 Shortcuts
4 drwxr-xr-x 2 root root 4096 juin 18 03:53 Sports
4 drwxr-xr-x 3 root root 4096 déc. 31 2024 SQL
4 -rwxr-xr-x 1 root root 341 déc. 31 2024 startup.txt
8 -rwxr-xr-x 1 root root 4607 juin 18 03:53 system.xml
4 drwxr-xr-x 2 root root 4096 déc. 31 1979 Text
4 drwxr-xr-x 2 root root 4096 déc. 31 1979 Vehicle
4 drwxr-xr-x 8 root root 4096 avril 10 18:25 Weather
4 drwxr-xr-x 2 root root 4096 avril 11 18:34 WIFI
u16041@u16041:/mnt/SDB/Garmin$ cd Act*
u16041@u16041:/mnt/SDB/Garmin/Activities$ ls -ls
total 640
4 -rwxr-xr-x 1 root root 858 juin 12 12:37 1111406-12 12-36-48.fit
12 -rwxr-xr-x 1 root root 10738 avril 9 13:12 2017-04-09 13-12-41.fit
4 -rwxr-xr-x 1 root root 1519 avril 9 13:41 2017-04-09 13-41-00.fit
4 -rwxr-xr-x 1 root root 2083 avril 10 19:28 2017-04-10 19-28-41.fit
4 -rwxr-xr-x 1 root root 1154 avril 15 10:54 2017-04-15 10-54-36.fit
4 -rwxr-xr-x 1 root root 1661 avril 15 11:58 2017-04-15 11-58-07.fit
4 -rwxr-xr-x 1 root root 1181 avril 24 16:11 2017-04-24 16-11-20.fit
4 -rwxr-xr-x 1 root root 1181 avril 24 19:23 2017-04-24 19-23-51.fit
4 -rwxr-xr-x 1 root root 1704 avril 24 20:45 2017-04-24 20-45-39.fit
4 -rwxr-xr-x 1 root root 899 avril 26 09:59 2017-04-26 09-58-54.fit
4 -rwxr-xr-x 1 root root 899 avril 26 10:06 2017-04-26 10-06-27.fit
4 -rwxr-xr-x 1 root root 2476 mai 6 12:36 2017-05-06 12-36-25.fit
4 -rwxr-xr-x 1 root root 2652 mai 7 14:38 2017-05-07 14-38-44.fit
16 -rwxr-xr-x 1 root root 13732 mai 7 15:46 2017-05-07 15-46-35.fit
24 -rwxr-xr-x 1 root root 22190 mai 7 16:25 2017-05-07 16-25-34.fit
4 -rwxr-xr-x 1 root root 4096 mai 8 11:12 2017-05-08 11-12-04.fit
16 -rwxr-xr-x 1 root root 13539 mai 9 16:56 2017-05-09 16-56-37.fit
4 -rwxr-xr-x 1 root root 858 mai 11 20:16 2017-05-11 20-16-12.fit
4 -rwxr-xr-x 1 root root 817 mai 11 20:16 2017-05-11 20-16-40.fit
4 -rwxr-xr-x 1 root root 817 mai 11 20:17 2017-05-11 20-17-37.fit
4 -rwxr-xr-x 1 root root 817 mai 11 20:18 2017-05-11 20-18-05.fit
4 -rwxr-xr-x 1 root root 817 mai 11 20:19 2017-05-11 20-19-05.fit
4 -rwxr-xr-x 1 root root 858 mai 13 06:28 2017-05-13 06-28-11.fit
4 -rwxr-xr-x 1 root root 899 mai 13 06:31 2017-05-13 06-31-00.fit
32 -rwxr-xr-x 1 root root 30830 mai 13 09:13 2017-05-13 09-13-07.fit
4 -rwxr-xr-x 1 root root 1210 mai 13 09:41 2017-05-13 09-41-33.fit
8 -rwxr-xr-x 1 root root 4584 mai 13 10:10 2017-05-13 10-10-17.fit
28 -rwxr-xr-x 1 root root 25273 mai 13 17:37 2017-05-13 17-37-52.fit
4 -rwxr-xr-x 1 root root 1492 mai 13 18:43 2017-05-13 18-43-26.fit
4 -rwxr-xr-x 1 root root 1046 mai 14 09:21 2017-05-14 09-21-27.fit
32 -rwxr-xr-x 1 root root 31321 mai 14 10:59 2017-05-14 10-59-00.fit
4 -rwxr-xr-x 1 root root 3055 mai 14 16:14 2017-05-14 16-14-38.fit
36 -rwxr-xr-x 1 root root 32961 mai 14 17:30 2017-05-14 17-30-09.fit
8 -rwxr-xr-x 1 root root 4806 mai 14 18:33 2017-05-14 18-33-34.fit
4 -rwxr-xr-x 1 root root 858 mai 14 18:33 2017-05-14 18-33-55.fit
4 -rwxr-xr-x 1 root root 1280 mai 14 18:45 2017-05-14 18-45-37.fit
4 -rwxr-xr-x 1 root root 1128 mai 17 10:06 2017-05-17 10-06-42.fit
12 -rwxr-xr-x 1 root root 12174 mai 17 11:40 2017-05-17 11-40-20.fit
44 -rwxr-xr-x 1 root root 42801 mai 17 16:40 2017-05-17 16-40-40.fit
48 -rwxr-xr-x 1 root root 48823 mai 18 01:17 2017-05-18 01-17-51.fit
32 -rwxr-xr-x 1 root root 28851 mai 20 17:42 2017-05-20 17-42-10.fit
4 -rwxr-xr-x 1 root root 1292 mai 22 11:24 2017-05-22 11-24-27.fit
8 -rwxr-xr-x 1 root root 7828 mai 22 12:02 2017-05-22 12-02-18.fit
4 -rwxr-xr-x 1 root root 1234 mai 24 13:46 2017-05-24 13-46-07.fit
4 -rwxr-xr-x 1 root root 1309 mai 27 16:59 2017-05-27 16-59-12.fit
4 -rwxr-xr-x 1 root root 1152 mai 28 13:40 2017-05-28 13-40-13.fit
4 -rwxr-xr-x 1 root root 1116 mai 28 13:45 2017-05-28 13-44-43.fit
4 -rwxr-xr-x 1 root root 1526 mai 28 16:25 2017-05-28 16-25-28.fit
4 -rwxr-xr-x 1 root root 1620 mai 28 17:01 2017-05-28 17-01-19.fit
4 -rwxr-xr-x 1 root root 1692 mai 28 17:48 2017-05-28 17-48-20.fit
4 -rwxr-xr-x 1 root root 1873 juin 8 23:56 2017-06-08 23-56-26.fit
4 -rwxr-xr-x 1 root root 1762 juin 12 12:36 2017-06-12 12-36-19.fit
56 -rwxr-xr-x 1 root root 55523 juin 13 11:36 2017-06-13 11-36-43.fit
8 -rwxr-xr-x 1 root root 5843 juin 13 12:11 2017-06-13 12-10-57.fit
4 -rwxr-xr-x 1 root root 1362 juin 17 05:53 2017-06-17 05-53-28.fit
4 -rwxr-xr-x 1 root root 1538 juin 17 05:59 2017-06-17 05-59-30.fit
64 -rwxr-xr-x 1 root root 63301 juin 17 10:39 2017-06-17 10-39-39.fit
u16041@u16041:/mnt/SDB/Garmin/Activities$ Je vais donc pouvoir me mettre à la recherche d'un logiciel libre sachant traiter ce type de fichiers
Mais cela ne sera pas celui-ci https://sourceforge.net/projects/gpxmer … p_redirect qui ne sait pas ouvrir le modèle .fit
Je repart donc avec gpslabel que je viens d'installer sur mon micro habituel.
u16041@u16041:/mnt/SDB/Garmin/Activities$ gpsbabel -V
GPSBabel Version 1.5.2On va voir ce que cela donne. Ce n'est pas gagné!!! car cela fait plus de 9 ans que le problème est connu!!!!
sudo gpsbabel -i garmin -f "/mnt/SDB/Garmin/Activities/2017-06-17 10-39-39.fit" -o gpx -F /home/gpx1.gpx
[sudo] Mot de passe de u16041 :
[ERROR] SERIAL: tcgetattr error: Inappropriate ioctl for device
[ERROR] Cannot open serial port '/mnt/SDB/Garmin/Activities/2017-06-17 10-39-39.fit'
GARMIN:Can't init /mnt/SDB/Garmin/Activities/2017-06-17 10-39-39.fitJe vais mettre tout cela sur un disque dur.
Dernière modification par Bougron (Le 18/06/2017, à 17:46)
Hors ligne
#15 Le 18/06/2017, à 17:57
- Bougron
Re : Garmin OREGON
root@u16041:~# sudo cp "/mnt/SDB/Garmin/Activities/2017-06-17 10-39-39.fit" /home/gpx1.fit
root@u16041:~# sudo gpsbabel -i garmin -f /home/gpx1.fit -o gpx -F /home/gpx1.gpx
[ERROR] SERIAL: tcgetattr error: Inappropriate ioctl for device
[ERROR] Cannot open serial port '/home/gpx1.fit'
GARMIN:Can't init /home/gpx1.fit
root@u16041:~# sudo gpsbabel -i garmin_fit -f /home/gpx1.fit -o gpx -F /home/gpx1.gpx
fit: Bad endian field
root@u16041:~#u16041@u16041:~$ gpsbabel --help
GPSBabel Version 1.5.2. http://www.gpsbabel.org
Usage:
gpsbabel [options] -i INTYPE -f INFILE [filter] -o OUTTYPE -F OUTFILE
gpsbabel [options] -i INTYPE -o OUTTYPE INFILE [filter] OUTFILE
Converts GPS route and waypoint data from one format type to another.
The input type and filename are specified with the -i INTYPE
and -f INFILE options. The output type and filename are specified
with the -o OUTTYPE and -F OUTFILE options.
If '-' is used for INFILE or OUTFILE, stdin or stdout will be used.
In the second form of the command, INFILE and OUTFILE are the
first and second positional (non-option) arguments.
INTYPE and OUTTYPE must be one of the supported file types and
may include options valid for that file type. For example:
'gpx', 'gpx,snlen=10' and 'ozi,snlen=10,snwhite=1'
(without the quotes) are all valid file type specifications.
Options:
-p Preferences file (gpsbabel.ini)
-s Synthesize shortnames
-r Process route information
-t Process track information
-T Process realtime tracking information
-w Process waypoint information [default]
-b Process command file (batch mode)
-c Character set for next operation
-N No smart icons on output
-x filtername Invoke filter (placed between inputs and output)
-D level Set debug level [0]
-l Print GPSBabel builtin character sets and exit
-h, -? Print detailed help and exit
-V Print GPSBabel version and exit
File Types (-i and -o options):
alantrl Alan Map500 tracklogs (.trl)
alanwpr Alan Map500 waypoints and routes (.wpr)
baroiq Brauniger IQ Series Barograph Download
bushnell_trl Bushnell GPS Trail file
bushnell Bushnell GPS Waypoint file
cambridge Cambridge/Winpilot glider software
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
cst CarteSurTable data file
v900 Columbus/Visiontac V900 files (.csv)
csv Comma separated values
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
compegps CompeGPS data files (.wpt/.trk/.rte)
deficon Default icon name
index Index of route/track to write (if more than one in
radius Give points (waypoints/route points) a default rad
snlen Length of generated shortnames (default 16)
iblue747 Data Logger iBlue747 csv
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
iblue757 Data Logger iBlue757 csv
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
an1 DeLorme .an1 (drawing) file
type Type of .an1 file
road Road type changes
nogc (0/1) Do not add geocache data to description
nourl (0/1) Do not add URLs to description
deficon Symbol to use for point data
color Color for lines or mapnotes
zoom Zoom level to reduce points
wpt_type Waypoint type
radius Radius for circles
gpl DeLorme GPL
delbin DeLorme PN-20/PN-30/PN-40 USB protocol
get_posn (0/1) Return current position as a waypoint
logs (0/1) Include groundspeak logs when writing
long_notes (0/1) Use long waypoint notes regardless of PN version
nukewpt (0/1) Delete all waypoints before sending
nuketrk (0/1) Delete all tracks before sending
nukerte (0/1) Delete all routes before sending
hint_at_end (0/1) If true, geocache hint at end of text
gcsym (0/1) If set to 0, prefer user-provided symbols over Gro
saplus DeLorme Street Atlas Plus
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
saroute DeLorme Street Atlas Route
turns_important (0/1) Keep turns if simplify filter is used
turns_only (0/1) Only read turns; skip all other points
split (0/1) Split into multiple routes at turns
controls Read control points as waypoint/route/none
times (0/1) Synthesize track times
xmap DeLorme XMap HH Native .WPT
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
xmap2006 DeLorme XMap/SAHH 2006 Native .TXT
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
xmapwpt DeLorme XMat HH Street Atlas USA .WPT (PPC)
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
destinator_itn Destinator Itineraries (.dat)
destinator_poi Destinator Points of Interest (.dat)
destinator_trl Destinator TrackLogs (.dat)
easygps EasyGPS binary format
exif Embedded Exif-GPS data (.jpg)
filename (0/1) Set waypoint name to source filename
frame Time-frame (in seconds)
name Locate waypoint for tagging by this name
overwrite (0/1) !OVERWRITE! the original file. Default=N
energympro Energympro GPS training watch
enigma Enigma binary waypoint file (.ert)
f90g F90G Automobile DVR GPS log file
igc FAI/IGC Flight Recorder Data Format
timeadj (integer sec or 'auto') Barograph to GPS time diff
garmin_fit Flexible and Interoperable Data Transfer (FIT) Act
flysight FlySight GPS File
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
gpssim Franson GPSGate Simulation
wayptspd Default speed for waypoints (knots/hr)
split (0/1) Split input into separate files
fugawi Fugawi
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
g7towin G7ToWin data files (.g7t)
garmin301 Garmin 301 Custom position and heartrate
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
garmin_g1000 Garmin G1000 datalog input filter file
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
glogbook Garmin Logbook XML
gdb Garmin MapSource - gdb
cat Default category on output (1..16)
bitscategory Bitmap of categories
ver Version of gdb file to generate (1..3)
via (0/1) Drop route points that do not have an equivalent w
roadbook (0/1) Include major turn points (with description) from
mapsource Garmin MapSource - mps
snlen Length of generated shortnames
snwhite (0/1) Allow whitespace synth. shortnames
mpsverout Version of mapsource file to generate (3,4,5)
mpsmergeout (0/1) Merge output with existing file
mpsusedepth (0/1) Use depth values on output (default is ignore)
mpsuseprox (0/1) Use proximity values on output (default is ignore)
garmin_txt Garmin MapSource - txt (tab delimited)
date Read/Write date format (i.e. yyyy/mm/dd)
datum GPS datum (def. WGS 84)
dist Distance unit [m=metric, s=statute]
grid Write position using this grid.
prec Precision of coordinates
temp Temperature unit [c=Celsius, f=Fahrenheit]
time Read/Write time format (i.e. HH:mm:ss xx)
utc Write timestamps with offset x to UTC time
pcx Garmin PCX5
deficon Default icon name
cartoexploreur (0/1) Write tracks compatible with Carto Exploreur
garmin_poi Garmin POI database
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
garmin_gpi Garmin Points of Interest (.gpi)
alerts (0/1) Enable alerts on speed or proximity distance
bitmap Use specified bitmap on output
category Default category on output
hide (0/1) Don't show gpi bitmap on device
descr (0/1) Write description to address field
notes (0/1) Write notes to address field
position (0/1) Write position to address field
proximity Default proximity
sleep After output job done sleep n second(s)
speed Default speed
unique (0/1) Create unique waypoint names (default = yes)
units Units used for names with @speed ('s'tatute or 'm'
writecodec codec to use for writing strings
garmin Garmin serial/USB protocol
snlen Length of generated shortnames
snwhite (0/1) Allow whitespace synth. shortnames
deficon Default icon name
get_posn (0/1) Return current position as a waypoint
power_off (0/1) Command unit to power itself down
erase_t (0/1) Erase existing courses when writing new ones
resettime (0/1) Sync GPS time to computer time
category Category number to use for written waypoints
bitscategory Bitmap of categories
baud Speed in bits per second of serial port (baud=9600
gtrnctr Garmin Training Center (.tcx)
course (0/1) Write course rather than history, default yes
sport Sport: Biking (deflt), Running, MultiSport, Other
gtrnctr Garmin Training Center (.xml)
course (0/1) Write course rather than history, default yes
sport Sport: Biking (deflt), Running, MultiSport, Other
geo Geocaching.com .loc
deficon Default icon name
nuke_placer (0/1) Omit Placer name
ggv_ovl Geogrid-Viewer ascii overlay file (.ovl)
ggv_log Geogrid-Viewer tracklogs (.log)
geonet GEOnet Names Server (GNS)
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
dg-100 GlobalSat DG-100/BT-335 Download
erase (0/1) Erase device data after download
erase_only (0/1) Only erase device data, do not download anything
dg-200 GlobalSat DG-200 Download
erase (0/1) Erase device data after download
erase_only (0/1) Only erase device data, do not download anything
googledir Google Directions XML
kml Google Earth (Keyhole) Markup Language
deficon Default icon name
lines (0/1) Export linestrings for tracks and routes
points (0/1) Export placemarks for tracks and routes
line_width Width of lines, in pixels
line_color Line color, specified in hex AABBGGRR
floating (0/1) Altitudes are absolute and not clamped to ground
extrude (0/1) Draw extrusion line from trackpoint to ground
track (0/1) Write KML track (default = 0)
trackdata (0/1) Include extended data for trackpoints (default = 1
trackdirection (0/1) Indicate direction of travel in track icons (defau
units Units used when writing comments ('s'tatute, 'm'et
labels (0/1) Display labels on track and routepoints (default
max_position_point Retain at most this number of position points (0
rotate_colors Rotate colors for tracks and routes (default autom
google Google Maps XML
gnav_trl Google Navigator Tracklines (.trl)
gopal GoPal GPS track log (.trk)
date Complete date-free tracks with given date (YYYYMMD
maxspeed The maximum speed (km/h) traveling from waypoint t
minspeed The minimum speed (km/h) traveling from waypoint t
clean (0/1) Cleanup common errors in trackdata
land_air_sea GPS Tracking Key Pro text
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
gtm GPS TrackMaker
arc GPSBabel arc filter file
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
gpsdrive GpsDrive Format
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
gpsdrivetrack GpsDrive Format for Tracks
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
gpsman GPSman
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
gpsutil gpsutil
gpx GPX XML
snlen Length of generated shortnames
suppresswhite (0/1) No whitespace in generated shortnames
logpoint (0/1) Create waypoints from geocache log entries
urlbase Base URL for link tag in output
gpxver Target GPX version for output
humminbirdextensio (0/1) Add info (depth) as Humminbird extension
garminextensions (0/1) Add info (depth) as Garmin extension
hiketech HikeTech
holux Holux (gm-100) .wpo Format
m241-bin Holux M-241 (MTK based) Binary File Format
csv MTK compatible CSV output file
m241 Holux M-241 (MTK based) download
erase (0/1) Erase device data after download
erase_only (0/1) Only erase device data, do not download anything
log_enable (0/1) Enable logging after download
csv MTK compatible CSV output file
vpl Honda/Acura Navigation System VP Log File Format
html HTML Output
stylesheet Path to HTML style sheet
encrypt (0/1) Encrypt hints using ROT13
logs (0/1) Include groundspeak logs if present
degformat Degrees output as 'ddd', 'dmm'(default) or 'dms'
altunits Units for altitude (f)eet or (m)etres
humminbird_ht Humminbird tracks (.ht)
humminbird Humminbird waypoints and routes (.hwr)
ignrando IGN Rando track files
index Index of track to write (if more than one in sourc
igo2008_poi iGO2008 points of interest (.upoi)
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
igo8 IGO8 .trk
tracknum Track identification number
title Track title
description Track description
jtr Jelbert GeoTagger data file
jogmap Jogmap.de XML format
kompass_tk Kompass (DAV) Track (.tk)
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
kompass_wp Kompass (DAV) Waypoints (.wp)
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
psitrex KuDaTa PsiTrex text
lowranceusr Lowrance USR
ignoreicons (0/1) Ignore event marker icons on read
writeasicons (0/1) Treat waypoints as icons on write
merge (0/1) (USR output) Merge into one segmented track
break (0/1) (USR input) Break segments into separate tracks
wversion (USR output) Write version
lowranceusr4 Lowrance USR version 4
title (output) Output title string
serialnum (output) Device serial number
description (output) Content description
maggeo Magellan Explorist Geocaching
mapsend Magellan Mapsend
trkver MapSend version TRK file to generate (3,4)
magellanx Magellan SD files (as for eXplorist)
deficon Default icon name
maxcmts Max number of comments to write (maxcmts=200)
magellan Magellan SD files (as for Meridian)
deficon Default icon name
maxcmts Max number of comments to write (maxcmts=200)
magellan Magellan serial protocol
deficon Default icon name
maxcmts Max number of comments to write (maxcmts=200)
baud Numeric value of bitrate (baud=4800)
noack (0/1) Suppress use of handshaking in name of speed
nukewpt (0/1) Delete all waypoints
ik3d MagicMaps IK3D project file (.ikt)
mainnav Mainnav
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
tef Map&Guide 'TourExchangeFormat' XML
routevia (0/1) Include only via stations in route
mapasia_tr7 MapAsia track file (.tr7)
mapbar Mapbar (China) navigation track for Sonim Xp3300
mapfactor Mapfactor Navigator
mapconverter Mapopolis.com Mapconverter CSV
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
mxf MapTech Exchange Format
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
mtk_locus MediaTek Locus
baudrate Speed in bits per second of serial port (autodetec
download (0/1) Download logged fixes
erase (0/1) Erase device data after download
status (0/1) Show device status
enable (0/1) Enable logging after download
mmo Memory-Map Navigator overlay files (.mmo)
locked (0/1) Write items 'locked' [default no]
visible (0/1) Write items 'visible' [default yes]
ver Write files with internal version [n]
s_and_t Microsoft Streets and Trips 2002-2007
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
miniHomer MiniHomer, a skyTraq Venus 6 based logger (downloa
baud Baud rate used for download
dump-file Dump raw data to this file
erase (0/1) Erase device data after download
first-sector First sector to be read from the device
initbaud Baud rate used to init device (0=autodetect)
last-sector Last sector to be read from the device (-1: smart
no-output (0/1) Disable output (useful with erase)
read-at-once Number of sectors to read at once (0=use single se
Home POI for Home Symbol as lat:lng[:alt]
Car POI for Car Symbol as lat:lng[:alt]
Boat POI for Boat Symbol as lat:lng[:alt]
Heart POI for Heart Symbol as lat:lng[:alt]
Bar POI for Bar Symbol as lat:lng[:alt]
garmin_xt Mobile Garmin XT Track files
ftype Garmin Mobile XT ([ATRK]/STRK) (required)
trk_header Track name processing option ([0]-nrm/1-ign)
motoactv Motoactiv CSV
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
bcr Motorrad Routenplaner (Map&Guide) .bcr files
index Index of route to write (if more than one in sourc
name New name for the route
radius Radius of our big earth (default 6371000 meters)
prefer_shortnames (0/1) Use shortname instead of description
mtk-bin MTK Logger (iBlue 747,...) Binary File Format
csv MTK compatible CSV output file
mtk MTK Logger (iBlue 747,Qstarz BT-1000,...) download
erase (0/1) Erase device data after download
erase_only (0/1) Only erase device data, do not download anything
log_enable (0/1) Enable logging after download
csv MTK compatible CSV output file
mynav MyNav TRC format
tpg National Geographic Topo .tpg (waypoints)
datum Datum (default=NAD27)
tpo2 National Geographic Topo 2.x .tpo
tpo3 National Geographic Topo 3.x/4.x .tpo
navicache Navicache.com XML
noretired (0/1) Suppress retired geocaches
nmn4 Navigon Mobile Navigator .rte files
index Index of route to write (if more than one in sourc
navigonwpt Navigon Waypoints
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
navilink NaviGPS GT-11/BGT-11 Download
nuketrk (0/1) Delete all track points
nukerte (0/1) Delete all routes
nukewpt (0/1) Delete all waypoints
nukedlg (0/1) Clear the datalog
datalog (0/1) Read from datalogger buffer
power_off (0/1) Command unit to power itself down
sbp NaviGPS GT-31/BGT-31 datalogger (.sbp)
sbn NaviGPS GT-31/BGT-31 SiRF binary logfile (.sbn)
naviguide Naviguide binary route file (.twl)
output 'wp' - Create waypoint file , 'rte' - Create route
reorder 'n' - Keep the existing wp name, 'y' - rename wayp
navitel_trk Navitel binary track (.bin)
dna Navitrak DNA marker format
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
netstumbler NetStumbler Summary File (text)
nseicon Non-stealth encrypted icon name
nsneicon Non-stealth non-encrypted icon name
seicon Stealth encrypted icon name
sneicon Stealth non-encrypted icon name
snmac (0/1) Shortname is MAC address
nima NIMA/GNIS Geographic Names File
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
nmea NMEA 0183 sentences
snlen Max length of waypoint name to write
gprmc (0/1) Read/write GPRMC sentences
gpgga (0/1) Read/write GPGGA sentences
gpvtg (0/1) Read/write GPVTG sentences
gpgsa (0/1) Read/write GPGSA sentences
date Complete date-free tracks with given date (YYYYMMD
get_posn (0/1) Return current position as a waypoint
pause Decimal seconds to pause between groups of strings
append_positioning (0/1) Append realtime positioning data to the output fil
baud Speed in bits per second of serial port (baud=4800
gisteq (0/1) Write tracks for Gisteq Phototracker
ignore_fix (0/1) Accept position fixes in gpgga marked invalid
lmx Nokia Landmark Exchange
binary (0/1) Compact binary representation
osm OpenStreetMap data files
tag Write additional way tag key/value pairs
tagnd Write additional node tag key/value pairs
created_by Use this value as custom created_by value
ozi OziExplorer
pack (0/1) Write all tracks into one file
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
wptfgcolor Waypoint foreground color
wptbgcolor Waypoint background color
proximity Proximity distance
altunit Unit used in altitude values
proxunit Unit used in proximity values
pocketfms_bc PocketFMS breadcrumbs
pocketfms_fp PocketFMS flightplan (.xml)
pocketfms_wp PocketFMS waypoints (.txt)
raymarine Raymarine Waypoint File (.rwf)
location Default location
ricoh Ricoh GPS Log File
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
cup See You flight analysis data
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
skyforce Skymap / KMD150 ascii files
skytraq SkyTraq Venus based loggers (download)
erase (0/1) Erase device data after download
targetlocation Set location finder target location as lat,lng
configlog Configure logging parameter as tmin:tmax:dmin:dmax
baud Baud rate used for download
initbaud Baud rate used to init device (0=autodetect)
read-at-once Number of sectors to read at once (0=use single se
first-sector First sector to be read from the device
last-sector Last sector to be read from the device (-1: smart
dump-file Dump raw data to this file
no-output (0/1) Disable output (useful with erase)
skytraq-bin SkyTraq Venus based loggers Binary File Format
first-sector First sector to be read from the file
last-sector Last sector to be read from the file (-1: read til
subrip SubRip subtitles for video mapping (.srt)
video_time Video position for which exact GPS time is known (
gps_time GPS time at position video_time (hhmmss, default i
gps_date GPS date at position video_time (hhmmss, default i
format Format for subtitles
stmsdf Suunto Trek Manager (STM) .sdf files
index Index of route (if more than one in source)
stmwpp Suunto Trek Manager (STM) WaypointPlus files
index Index of route/track to write (if more than one in
xol Swiss Map 25/50/100 (.xol)
openoffice Tab delimited fields useful for OpenOffice, Plotic
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
teletype Teletype [ Get Jonathon Johnson to describe
text Textual Output
nosep (0/1) Suppress separator lines between waypoints
encrypt (0/1) Encrypt hints using ROT13
logs (0/1) Include groundspeak logs if present
degformat Degrees output as 'ddd', 'dmm'(default) or 'dms'
altunits Units for altitude (f)eet or (m)etres
splitoutput (0/1) Write each waypoint in a separate file
tomtom_itn TomTom Itineraries (.itn)
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
tomtom_itn_places TomTom Places Itineraries (.itn)
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
tomtom_asc TomTom POI file (.asc)
snlen Max synthesized shortname length
snwhite (0/1) Allow whitespace synth. shortnames
snupper (0/1) UPPERCASE synth. shortnames
snunique (0/1) Make synth. shortnames unique
urlbase Basename prepended to URL on output
prefer_shortnames (0/1) Use shortname instead of description
datum GPS datum (def. WGS 84)
tomtom TomTom POI file (.ov2)
tmpro TopoMapPro Places File
dmtlog TrackLogs digital mapping (.trl)
index Index of track (if more than one in source)
tiger U.S. Census Bureau Tiger Mapping Service
nolabels (0/1) Suppress labels on generated pins
genurl Generate file with lat/lon for centering map
margin Margin for map. Degrees or percentage
snlen Max shortname length when used with -s
oldthresh Days after which points are considered old
oldmarker Marker type for old points
newmarker Marker type for new points
suppresswhite (0/1) Suppress whitespace in generated shortnames
unfoundmarker Marker type for unfound points
xpixels Width in pixels of map
ypixels Height in pixels of map
iconismarker (0/1) The icon description is already the marker
unicsv Universal csv with field structure in first line
datum GPS datum (def. WGS 84)
grid Write position using this grid.
utc Write timestamps with offset x to UTC time
format (0/1) Write name(s) of format(s) from input session(s)
filename (0/1) Write filename(s) from input session(s)
vcard Vcard Output (for iPod)
encrypt (0/1) Encrypt hints using ROT13
vidaone VidaOne GPS for Pocket PC (.gpb)
ver Version of VidaOne file to read or write (1 or 2)
vitosmt Vito Navigator II tracks
vitovtt Vito SmartMap tracks (.vtt)
wfff WiFiFoFum 2.0 for PocketPC XML
aicicon Infrastructure closed icon name
aioicon Infrastructure open icon name
ahcicon Ad-hoc closed icon name
ahoicon Ad-hoc open icon name
snmac (0/1) Shortname is MAC address
wintec_tes Wintec TES file
wbt-bin Wintec WBT-100/200 Binary File Format
wbt Wintec WBT-100/200 GPS Download
erase (0/1) Erase device data after download
wbt-tk1 Wintec WBT-201/G-Rays 2 Binary File Format
itracku XAiOX iTrackU Logger
backup Appends the input to a backup file
new Only waypoints that are not the backup file
itracku-bin XAiOX iTrackU Logger Binary File Format
backup Appends the input to a backup file
new Only waypoints that are not the backup file
yahoo Yahoo Geocode API data
addrsep String to separate concatenated address fields (de
Supported data filters:
arc Include Only Points Within Distance of Arc
file File containing vertices of arc
rte Route(s) are vertices of arc
trk Track(s) are vertices of arc
distance Maximum distance from arc (required)
exclude Exclude points close to the arc
points Use distance from vertices not lines
project Move waypoints to its projection on lines or verti
bend Add points before and after bends in routes
distance Distance to the bend in meters where the new point
minangle Minimum bend angle in degrees
discard Remove unreliable points with high hdop or vdop
hdop Suppress points with higher hdop
vdop Suppress points with higher vdop
hdopandvdop Link hdop and vdop supression with AND
sat Minimium sats to keep points
fixnone Suppress points without fix
fixunknown Suppress points with unknown fix
elemin Suppress points below given elevation in meters
elemax Suppress points above given elevation in meters
matchname Suppress points where name matches given name
matchdesc Suppress points where description matches given na
matchcmt Suppress points where comment matches given name
matchicon Suppress points where type matches given name
duplicate Remove Duplicates
shortname Suppress duplicate waypoints based on name
location Suppress duplicate waypoint based on coords
all Suppress all instances of duplicates
correct Use coords from duplicate points
interpolate Interpolate between trackpoints
time Time interval in seconds
distance Distance interval in miles or kilometers
route Interpolate routes instead
nuketypes Remove all waypoints, tracks, or routes
waypoints Remove all waypoints from data stream
tracks Remove all tracks from data stream
routes Remove all routes from data stream
polygon Include Only Points Inside Polygon
file File containing vertices of polygon (required)
exclude Exclude points inside the polygon
position Remove Points Within Distance
distance Maximum positional distance (required)
all Suppress all points close to other points
time Maximum time in seconds beetween two points (required)
radius Include Only Points Within Radius
lat Latitude for center point (D.DDDDD) (required)
lon Longitude for center point (D.DDDDD) (required)
distance Maximum distance from center (required)
exclude Exclude points close to center
nosort Inhibit sort by distance to center
maxcount Output no more than this number of points
asroute Put resulting waypoints in route of this name
simplify Simplify routes
count Maximum number of points in route
error Maximum error
crosstrack Use cross-track error (default)
length Use arclength error
relative Use relative error
sort Rearrange waypoints by resorting
gcid Sort by numeric geocache ID
shortname Sort by waypoint short name
description Sort by waypoint description
time Sort by time
stack Save and restore waypoint lists
push Push waypoint list onto stack
pop Pop waypoint list from stack
swap Swap waypoint list with <depth> item on stack
copy (push) Copy waypoint list
append (pop) Append list
discard (pop) Discard top of stack
replace (pop) Replace list (default)
depth (swap) Item to use (default=1)
reverse Reverse stops within routes
track Manipulate track lists
move Correct trackpoint timestamps by a delta
pack Pack all tracks into one
split Split by date or time interval (see README)
sdistance Split by distance
merge Merge multiple tracks for the same way
name Use only track(s) where title matches given name
start Use only track points after this timestamp
stop Use only track points before this timestamp
title Basic title for new track(s)
fix Synthesize GPS fixes (PPS, DGPS, 3D, 2D, NONE)
course Synthesize course
speed Synthesize speed
seg2trk Split track at segment boundaries into multiple tr
trk2seg Merge tracks inserting segment separators at bound
segment segment tracks with abnormally long gaps
faketime Add specified timestamp to each trackpoint
discard Discard track points without timestamps during mer
transform Transform waypoints into a route, tracks into rout
wpt Transform track(s) or route(s) into waypoint(s) [R
rte Transform waypoint(s) or track(s) into route(s) [W
trk Transform waypoint(s) or route(s) into tracks(s) [
rptdigits Number of digits in generated names
rptname Use source name for route point names
del Delete source data after transformation
height Manipulate altitudes
add Adds a constant value to every altitude (meter, ap
wgs84tomsl Converts WGS84 ellipsoidal height to orthometric h
swap Swap latitude and longitude of all loaded points
validate Validate internal data structures
checkempty Check for empty input
debug Output debug messages instead of possibly issuing
u16041@u16041:~$ Je viens de me connecter à Windows 10 et je me prépare à installer basecamp.
Change History
Changes made from version 4.6.1 to 4.6.2:
Fixed an issue displaying route elevation graphs
Changes made from version 4.5.2 to 4.6.1:
Added support for downloading preview imagery for BirdsEye Select.
Added support for displaying DEM shading for some cycling map products.
Added support for track metadata from FIT files.
Dernière modification par Bougron (Le 19/06/2017, à 12:37)
Hors ligne
Pages : 1