Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 17/05/2017, à 18:43

abhdfr

[RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

Bonjour à la communauté
je viens vers vous pour un problème que je ne parviens pas à solutionner, le freeze de mon PC.

Voici ma configuration actuelle :
Packard Bell iMedia x2750
   Processeur    Intel Core 2 Quad Q8200
   Quantité de mémoire vive    3 Go
   Type de mémoire vive    DDR2-SDRAM
   Type de stockage principal    7200tr/mn
   Capacité de stockage principal    320 Go
   Interface stockage principal    Serial ATA
   Type de lecteur optique    Double couche
   Processeur graphique    Nvidia GeForce 9300 GE
   Quantité de mémoire graphique    256 Mo
Ubuntu 17.04 64bit

sudo lshw -C display -numeric
*-display                 
       description: VGA compatible controller
       produit: G98 [GeForce 9300 GE] [10DE:6E0]
       fabriquant: NVIDIA Corporation [10DE]
       identifiant matériel: 0
       information bus: pci@0000:02:00.0
       version: a1
       bits: 64 bits
       horloge: 33MHz
       fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom
       configuration: driver=nvidia latency=0
       ressources: irq:27 mémoire:ec000000-ecffffff mémoire:d0000000-dfffffff mémoire:ea000000-ebffffff portE/S:bf00(taille=128) mémoire:c0000-dffff

Ce PC tournait auparavant parfaitement sous Windows 7 x64

Les freezes intervenant aléatoirement lorsque je navigue sur le net (pas de stream vidéo), je me suis dit que ça venait de Firefox, que j'ai donc désinstallé et remplacé par Chromium, en vain.

Plusieurs recherches sur différents forums mettent en cause la carte graphique, notamment ce thread (post #3) : https://forum.ubuntu-fr.org/viewtopic.php?id=1991821
J'ai donc cherché à installer les pilotes dits "propriétaires" de ma carte graphique, en les téléchargeant directement depuis le site NVidia : http://www.nvidia.fr/download/driverRes … /114842/fr
sans parvenir à installer le fichier .run

1.png
2.png
4.png

Entre temps, j'ai aussi lu que celà pouvait venir d'une surchauffe du CPU.
Un petit

sensors

donne les informations suivantes :

coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +56.0°C  (high = +80.0°C, crit = +100.0°C)
Core 1:       +51.0°C  (high = +80.0°C, crit = +100.0°C)
Core 2:       +53.0°C  (high = +80.0°C, crit = +100.0°C)
Core 3:       +52.0°C  (high = +80.0°C, crit = +100.0°C)

it8718-isa-0290
Adapter: ISA adapter
in0:          +1.10 V  (min =  +0.00 V, max =  +4.08 V)
in1:          +1.82 V  (min =  +0.00 V, max =  +4.08 V)
in2:          +3.25 V  (min =  +0.00 V, max =  +4.08 V)
+5V:          +2.98 V  (min =  +0.00 V, max =  +4.08 V)
in4:          +3.07 V  (min =  +0.00 V, max =  +3.95 V)
in5:          +0.06 V  (min =  +0.00 V, max =  +4.08 V)
in6:          +0.10 V  (min =  +0.00 V, max =  +4.08 V)
5VSB:         +2.61 V  (min =  +0.00 V, max =  +4.08 V)
Vbat:         +3.22 V  
fan1:        1638 RPM  (min = 3245 RPM)  ALARM
fan2:           0 RPM  (min =    0 RPM)
temp1:        +29.0°C  (low  =  -1.0°C, high = +127.0°C)  sensor = thermal diode
temp2:        +43.0°C  (low  =  -1.0°C, high = +127.0°C)  sensor = thermistor
temp3:        +22.0°C  (low  =  -1.0°C, high = +127.0°C)  sensor = thermistor
cpu0_vid:    +1.219 V
intrusion0:  ALARM

Le moniteur de ressources affiche les informations suivantes
3.png

Je ne sais plus trop où chercher ni comment identifier réellement le problème.
J'espère que vous pourrez m'aider dans la recherche d'une solution.
Une réinstallation/changement d'OS n'est pas envisageable, beaucoup trop de données seraient à sauvegarder.

Bien à vous, A.

Dernière modification par abhdfr (Le 11/06/2017, à 19:38)

Hors ligne

#2 Le 17/05/2017, à 19:54

abelthorne

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

Personnellement, en cas de freezes aléatoires, la première chose que je vérifie, c'est la RAM. Tu as Memtest dans le menu de GRUB (ou le menu d'un LiveCD Ubuntu). Laisse-le faire quelques passes complètes : si au bout de 5 il n'a rien trouvé, tu peux pousser jusqu'à 10. S'il n'a toujours rien trouvé à ce moment-là, on peut a priori écarter cette hypothèse. S'il trouve la moindre erreur à un moment, tu es bon pour changer la RAM. Note : le test va prendre plusieurs heures.

Ça pourrait aussi venir d'une surchauffe, peut-être plus de la part de la carte graphique que du CPU. Mais dans ce cas, tu devrais entendre les ventilos tourner anormalement vite quand ça arrive.

Pour ce qui est du pilote, tu es bon : tu utilises déjà le pilote nVidia. Et comme ton GPU est assez ancien, tu n'auras de toute façon pas plus récent en allant le télécharger chez nVidia.

Hors ligne

#3 Le 17/05/2017, à 21:39

tarkan99

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

salut !
en parallèle du test de la RAM, peux-tu fournir un rapport bisnext stp ?
https://doc.ubuntu-fr.org/bisnext#insta … n_standard

[HS]

Une réinstallation/changement d'OS n'est pas envisageable, beaucoup trop de données seraient à sauvegarder.

rassure moi, tu as des sauvegardes de tes données ? Ton PC n'est pas de tout jeunesse, le disque peut lacher sans crier gare !

Dernière modification par tarkan99 (Le 17/05/2017, à 21:43)


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#4 Le 18/05/2017, à 11:33

lepetit

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

+1 pour un memtest sur ta ram


-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10

Hors ligne

#5 Le 18/05/2017, à 16:55

abhdfr

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

Bonjour à tous et avant tout, merci pour vos réponses.
Concernant le test Ram, j'ai omis de le préciser dans mon post initial mais il avait été réalisé avec Memtest64 sur une clé USB bootable, sans retourner aucune erreur.

tarkan99 a écrit :

rassure moi, tu as des sauvegardes de tes données ? Ton PC n'est pas de tout jeunesse, le disque peut lacher sans crier gare !

Le disque dur a été changé quelques jours avant le passage à Ubuntu (acheté le 24/04/2017), et les données avaient mis presque une journée complète pour être transférées.

tarkan99 a écrit :

salut !
en parallèle du test de la RAM, peux-tu fournir un rapport bisnext stp ?
https://doc.ubuntu-fr.org/bisnext#insta … n_standard

Voici le rapport de bisnext : https://paste.debian.net/933059/

May 18 2017, bisnext report id 59c9b also available at https://paste.debian.net/933059/

                                 bisnext 0.02


============================ Hardware and System Summary ======================

System:    Kernel: 4.10.0-21-generic x86_64 (64 bit gcc: 6.3.0)
           Desktop: N/A dm: lightdm Distro: Ubuntu 17.04
Machine:   Device: desktop System: PACKARD BELL BV product: IMEDIA X2750 v: PB80X30302
           Mobo: Packard Bell BV model: MCP73 v: 1.XX
           BIOS: Phoenix v: PBDIEGMB.P15 date: 07/10/2008
           Chassis: Packard Bell BV type: 3 v: MCP73
Battery    No battery data found in /sys or dmidecode. Is one present?
CPU:       Quad core Intel Core2 Quad Q8200 (-MCP-) cache: 2048 KB
           flags: (lm nx sse sse2 sse3 sse4_1 ssse3) bmips: 18668
           clock speeds: max: 2333 MHz 1: 2333 MHz 2: 2333 MHz 3: 2333 MHz
           4: 2333 MHz
Memory:    Array-1 capacity: 8 GB (est) devices: 4 EC: None
           max module size: 2 GB
           Device-1: A0 size: 1 GB (Single-bank) speed: 667 MHz type: DRAM
           manufacturer: N/A part: N/A
           Device-2: A1 size: No Module Installed type: DRAM
           Device-3: A2 size: 2 GB (Double-bank) speed: 667 MHz type: DRAM
           manufacturer: N/A part: N/A
           Device-4: A3 size: No Module Installed type: DRAM
Graphics:  Card: NVIDIA G98 [GeForce 9300 GE]
           bus-ID: 02:00.0 chip-ID: 10de:06e0
           Display Server: X.Org 1.19.3 drivers: nvidia (unloaded: modesetting,fbdev,vesa,nouveau)
           tty size: 1280x720@59.86hz
           GLX Renderer: GeForce 9300 GE/PCIe/SSE2
           GLX Version: 3.3.0 NVIDIA 304.135 Direct Rendering: Yes
Audio:     Card NVIDIA MCP73 High Definition Audio
           driver: snd_hda_intel bus-ID: 00:09.0 chip-ID: 10de:07fc
           Sound: Advanced Linux Sound Architecture v: k4.10.0-21-generic
Network:   Card: NVIDIA MCP73 Ethernet
           driver: forcedeth port: f600 bus-ID: 00:0f.0 chip-ID: 10de:07dc
           IF: enp0s15 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 1000.2GB (1.4% used)
           ID-1: /dev/sda model: WDC_WD10EZEX size: 1000.2GB
           temp: 38C
           Optical: No optical drives detected.
Partition: ID-1: / size: 916G used: 14G (2%) fs: ext4 dev: /dev/sda1
           label: N/A uuid: 219dd7a6-ce5e-4d5c-946f-57f0e65304c1
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Unmounted: No unmounted partitions detected
Sensors:   System Temperatures: cpu: 39.0C mobo: 28.0C gpu: 0.0:69C
           Fan Speeds (in rpm): cpu: 1622 fan-2: 0
Repos:     Active apt sources in file: /etc/apt/sources.list
           deb http://fr.archive.ubuntu.com/ubuntu/ zesty main restricted
           deb http://fr.archive.ubuntu.com/ubuntu/ zesty-updates main restricted
           deb http://fr.archive.ubuntu.com/ubuntu/ zesty universe
           deb http://fr.archive.ubuntu.com/ubuntu/ zesty-updates universe
           deb http://fr.archive.ubuntu.com/ubuntu/ zesty multiverse
           deb http://fr.archive.ubuntu.com/ubuntu/ zesty-updates multiverse
           deb http://fr.archive.ubuntu.com/ubuntu/ zesty-backports main restricted universe multiverse
           deb http://security.ubuntu.com/ubuntu zesty-security main restricted
           deb http://security.ubuntu.com/ubuntu zesty-security universe
           deb http://security.ubuntu.com/ubuntu zesty-security multiverse
           Active apt sources in file: /etc/apt/sources.list.d/alexmurray-ubuntu-indicator-sensors-zesty.list
           deb http://ppa.launchpad.net/alexmurray/indicator-sensors/ubuntu zesty main
           Active apt sources in file: /etc/apt/sources.list.d/nilarimogard-ubuntu-webupd8-zesty.list
           deb http://ppa.launchpad.net/nilarimogard/webupd8/ubuntu zesty main
           Active apt sources in file: /etc/apt/sources.list.d/noobslab-ubuntu-themes-zesty.list
           deb http://ppa.launchpad.net/noobslab/themes/ubuntu zesty main
           Active apt sources in file: /etc/apt/sources.list.d/tualatrix-ubuntu-ppa-zesty.list
           deb http://ppa.launchpad.net/tualatrix/ppa/ubuntu zesty main
Processes: CPU: % used - Memory: MB / % used - top 10 active
           1: cpu: 12.0% command: chromium-browser pid: 3998 mem: 351.93MB (11.7%)
           2: cpu: 8.7% command: chromium-browser pid: 4144 mem: 288.26MB (9.5%)
           3: cpu: 6.1% command: chromium-browser pid: 4220 mem: 122.63MB (4.0%)
           4: cpu: 4.0% command: chromium-browser pid: 4056 mem: 128.42MB (4.2%)
           5: cpu: 2.1% command: chromium-browser pid: 4099 mem: 117.83MB (3.9%)
           6: cpu: 1.8% command: thunderbird pid: 2335 mem: 303.08MB (10.0%)
           7: cpu: 1.2% command: compiz pid: 1959 mem: 190.16MB (6.3%)
           8: cpu: 1.1% command: gnome-terminal-server pid: 4241 mem: 38.82MB (1.2%)
           9: cpu: 0.8% command: chromium-browser pid: 4149 mem: 99.23MB (3.3%)
           10: cpu: 0.8% command: indicator-multiload pid: 2074 mem: 25.83MB (0.8%)
           Memory: MB / % used - CPU: % used - top 10 active
           1: mem: 351.93MB (11.7%) command: chromium-browser pid: 3998 cpu: 12.0%
           2: mem: 303.08MB (10.0%) command: thunderbird pid: 2335 cpu: 1.8%
           3: mem: 288.26MB (9.5%) command: chromium-browser pid: 4144 cpu: 8.7%
           4: mem: 190.16MB (6.3%) command: compiz pid: 1959 cpu: 1.2%
           5: mem: 128.42MB (4.2%) command: chromium-browser pid: 4056 cpu: 4.0%
           6: mem: 122.63MB (4.0%) command: chromium-browser pid: 4220 cpu: 6.1%
           7: mem: 117.83MB (3.9%) command: chromium-browser pid: 4099 cpu: 2.1%
           8: mem: 115.71MB (3.8%) command: gnome-software pid: 2075 cpu: 0.0%
           9: mem: 99.23MB (3.3%) command: chromium-browser pid: 4149 cpu: 0.8%
           10: mem: 78.20MB (2.6%) command: Xorg pid: 1025 cpu: 0.4%
Info:      Processes: 242 Uptime: 1:47 Memory: 1816.1/3004.8MB
           Init: systemd v: 232 runlevel: 5 default: 2 Gcc sys: 6.3.0
           Client: Shell (bash 4.4.71 running in bash) inxi: 2.3.8


_______________________________ UEFI settings _________________________________

Computer booted in Legacy mode for this session.
UEFI currently not active or not available on this system.


__________________________________ Secure Boot ________________________________

Secure Boot disabled or not available on this system.




========================= Boot Information Details ============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 17.04
    Boot files:         /boot/grub/grub.cfg /etc/fstab /etc/default/grub  
                       /boot/grub/i386-pc/core.img

_________________________=== Drive/Partition Info ===__________________________

Drive: sda _____________________________________________________________________
Disque /dev/sda : 931,5 GiB, 1000204886016 octets, 1953525168 secteurs
Unités : sectors of 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048 1,953,523,711 1,953,521,664  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/loop1                                              squashfs   
/dev/sda1        219dd7a6-ce5e-4d5c-946f-57f0e65304c1   ext4       

_________________________ "ls -l /dev/disk/by_id" output ______________________

total 0
lrwxrwxrwx 1 root root  9 mai   18 16:01 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y0FRN2H3 -> ../../sda
lrwxrwxrwx 1 root root 10 mai   18 16:01 ata-WDC_WD10EZEX-08WN4A0_WD-WCC6Y0FRN2H3-part1 -> ../../sda1
lrwxrwxrwx 1 root root  9 mai   18 16:01 usb-Generic-_Compact_Flash_20021111153705700-0:0 -> ../../sdb
lrwxrwxrwx 1 root root  9 mai   18 16:01 usb-Generic-_MS_MS-Pro_20021111153705700-0:3 -> ../../sde
lrwxrwxrwx 1 root root  9 mai   18 16:01 usb-Generic-_SD_MMC_20021111153705700-0:2 -> ../../sdd
lrwxrwxrwx 1 root root  9 mai   18 16:01 usb-Generic-_SM_xD-Picture_20021111153705700-0:1 -> ../../sdc
lrwxrwxrwx 1 root root  9 mai   18 16:01 wwn-0x50014ee2636531d0 -> ../../sda
lrwxrwxrwx 1 root root 10 mai   18 16:01 wwn-0x50014ee2636531d0-part1 -> ../../sda1

________________________________ Mount points _________________________________

Device           Mount_Point              Type       Options
/dev/sda1        /                                   ext4 (rw,relatime,errors=remount-ro,data=ordered)





__________________________=== Boot Files Content ===___________________________


___________________________ sda1/boot/grub/grub.cfg: ___________________________

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/10_linux ###

--- Notice bisnext removed top of file content from the report for readability

menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-219dd7a6-ce5e-4d5c-946f-57f0e65304c1' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  219dd7a6-ce5e-4d5c-946f-57f0e65304c1
	else
	  search --no-floppy --fs-uuid --set=root 219dd7a6-ce5e-4d5c-946f-57f0e65304c1
	fi
        linux	/boot/vmlinuz-4.10.0-21-generic root=UUID=219dd7a6-ce5e-4d5c-946f-57f0e65304c1 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.10.0-21-generic
}

--- Notice bisnext removed the submenu section from the report for readability

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  219dd7a6-ce5e-4d5c-946f-57f0e65304c1
	else
	  search --no-floppy --fs-uuid --set=root 219dd7a6-ce5e-4d5c-946f-57f0e65304c1
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  219dd7a6-ce5e-4d5c-946f-57f0e65304c1
	else
	  search --no-floppy --fs-uuid --set=root 219dd7a6-ce5e-4d5c-946f-57f0e65304c1
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

_______________________________ sda1/etc/fstab: ________________________________

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=219dd7a6-ce5e-4d5c-946f-57f0e65304c1 /               ext4    errors=remount-ro 0       1
/swapfile                                 none            swap    sw              0       0

____________________________ sda1/etc/default/grub: ____________________________

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

_________ Devices which don't seem to have a corresponding hard drive: _________

sdb sdc sdd sde 


===============================================================================
                          Running System Information                           
===============================================================================

______________________________ Kernel parameters ______________________________

BOOT_IMAGE=/boot/vmlinuz-4.10.0-21-generic root=UUID=219dd7a6-ce5e-4d5c-946f-57f0e65304c1 ro quiet splash


______________________________ Boot-up Statistics ______________________________

Startup finished in 11.486s (kernel) + 40.113s (userspace) = 51.599s


blame, first 10:
apt-daily.service                   31.203s
dev-sda1.device                     9.211s
keyboard-setup.service              6.921s
systemd-modules-load.service        6.762s
systemd-udevd.service               5.997s
NetworkManager-wait-online.service  5.396s
fwupd.service                       2.414s
ModemManager.service                1.220s
accounts-daemon.service             1.219s
NetworkManager.service              1.121s


critical-chain:
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

  1 graphical.target @16.027s
  2 multi-user.target @16.027s
  3 teamviewerd.service @15.523s +503ms
  4 network-online.target @15.521s
  5 NetworkManager-wait-online.service @10.124s +5.396s
  6 NetworkManager.service @9.001s +1.121s
  7 dbus.service @8.918s
  8 basic.target @8.892s
  9 sockets.target @8.892s
 10 snapd.socket @8.865s +25ms
 11 sysinit.target @8.827s
 12 systemd-timesyncd.service @8.517s +307ms
 13 systemd-tmpfiles-setup.service @8.073s +385ms
 14 local-fs.target @8.051s
 15 run-user-1000-gvfs.mount @15.567s
 16 run-user-1000.mount @14.392s
 17 local-fs-pre.target @8.051s
 18 keyboard-setup.service @1.129s +6.921s
 19 systemd-journald.socket @1.078s
 20 -.mount @897ms
 21 system.slice @1.078s
 22 -.slice @897ms


_________________________ RAM usage & Free disk space _________________________

              total        used        free      shared  buff/cache   available
Mem:           2.9G        1.7G        163M         32M        1.1G        1.1G
Swap:          2.0G        1.1M        2.0G
Swappiness = 60

Filesystem     Mounted on                Type      Size  Used Avail Use% IUse%
/dev/loop0     /snap/wordpress-desktop/2 squashfs  114M  114M     0 100%  100%
/dev/loop1     /snap/core/1689           squashfs   80M   80M     0 100%  100%
/dev/sda1      /                         ext4      916G   14G  856G   2%    1%


_________________________________ USB devices __________________________________

Bus 001 Device 004: ID 0bda:0111 Realtek Semiconductor Corp. RTS5111 Card Reader Controller
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 002 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/10p, 12M
    |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 1: Dev 2, If 2, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 4: Dev 3, If 1, Class=Wireless, Driver=btusb, 12M
    |__ Port 4: Dev 3, If 0, Class=Wireless, Driver=btusb, 12M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/10p, 480M
    |__ Port 6: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M


_______________________________ Wireless Status _______________________________

0: hci0: Bluetooth
	Soft blocked: no
	Hard blocked: no


___________________________________ Modules Loaded ____________________________

Module                  Size  Used by
ahci                   36864  1
autofs4                40960  2
binfmt_misc            20480  1
bluetooth             557056  31 btrtl,btintel,bnep,btbcm,rfcomm,btusb
bnep                   20480  2
btbcm                  16384  1 btusb
btintel                16384  1 btusb
btrfs                1093632  0
btrtl                  16384  1 btusb
btusb                  45056  0
coretemp               16384  0
crc_itu_t              16384  1 firewire_core
drm                   352256  2 nvidia
firewire_core          65536  1 firewire_ohci
firewire_ohci          40960  0
fjes                   73728  0
forcedeth              69632  0
hfs                    57344  0
hfsplus               106496  0
hid                   114688  2 hid_generic,usbhid
hid_generic            16384  0
hwmon_vid              16384  1 it87
i2c_nforce2            16384  0
input_leds             16384  0
ip_tables              24576  0
it87                   57344  0
jfs                   184320  0
joydev                 20480  0
libahci                32768  1 ahci
libcrc32c              16384  1 xfs
lp                     20480  0
mac_hid                16384  0
minix                  36864  0
msdos                  20480  0
ntfs                  102400  0
nvidia              11407360  54
parport                49152  3 lp,parport_pc,ppdev
parport_pc             32768  0
pata_acpi              16384  0
pata_amd               20480  0
ppdev                  20480  0
psmouse               139264  0
qnx4                   16384  0
raid6_pq              114688  1 btrfs
rfcomm                 77824  2
serio_raw              16384  0
shpchp                 36864  0
snd                    77824  17 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
snd_hda_codec         126976  4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_codec_generic    73728  1 snd_hda_codec_realtek
snd_hda_codec_hdmi     49152  1
snd_hda_codec_realtek    90112  1
snd_hda_core           81920  5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_intel          36864  3
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               102400  4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                65536  2 snd_seq_midi_event,snd_seq_midi
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_timer              32768  2 snd_seq,snd_pcm
soundcore              16384  1 snd
uas                    24576  0
ufs                    73728  0
usbhid                 53248  0
usb_storage            69632  1 uas
wmi                    16384  0
xfs                  1191936  0
xor                    24576  1 btrfs
x_tables               36864  1 ip_tables


______________________________ Additional Drivers _____________________________

== /sys/devices/pci0000:00/0000:00:0b.0/0000:02:00.0 ==
vendor   : NVIDIA Corporation
modalias : pci:v000010DEd000006E0sv0000174Bsd00009830bc03sc00i00
model    : G98 [GeForce 9300 GE]
driver   : nvidia-304 - distro non-free
driver   : nvidia-340 - distro non-free recommended
driver   : xserver-xorg-video-nouveau - distro free builtin

== cpu-microcode.py ==
driver   : intel-microcode - distro non-free



__________________________________ Locales ___________________________________

locale command output:
LANG=fr_FR.UTF-8
LANGUAGE=fr_FR
LC_CTYPE="fr_FR.UTF-8"
LC_NUMERIC="fr_FR.UTF-8"
LC_TIME="fr_FR.UTF-8"
LC_COLLATE="fr_FR.UTF-8"
LC_MONETARY="fr_FR.UTF-8"
LC_MESSAGES="fr_FR.UTF-8"
LC_PAPER="fr_FR.UTF-8"
LC_NAME="fr_FR.UTF-8"
LC_ADDRESS="fr_FR.UTF-8"
LC_TELEPHONE="fr_FR.UTF-8"
LC_MEASUREMENT="fr_FR.UTF-8"
LC_IDENTIFICATION="fr_FR.UTF-8"
LC_ALL=

/etc/default/locale:
#  File generated by update-locale
LANG="fr_FR.UTF-8"

Active keyboard layout:
rules:      evdev
model:      pc105
layout:     fr,fr,us
variant:    azerty,oss,

Default keyboard layout:
XKBMODEL="pc105"
XKBLAYOUT=""
XKBVARIANT=""
XKBOPTIONS=""
BACKSPACE="guess"


_____________________________ Upgradable Packages _____________________________

gnome-calendar  3.24.1-0ubuntu0.1  from:3.24.0-0ubuntu1


________________________ Package Configuration Pending ________________________

None


__________________________ Package Installation Pending _______________________

Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
  bbswitch-dkms fonts-opensymbol libabw-0.1-1 libboost-date-time1.62.0
  libclucene-contribs1v5 libclucene-core1v5 libcmis-0.5-5v5 libe-book-0.1-1
  libeot0 libetonyek-0.1-1 libexttextcat-2.0-0 libexttextcat-data
  liblangtag-common liblangtag1 libmhash2 libmwaw-0.3-3 libmythes-1.2-0
  libneon27-gnutls libodfgen-0.1-1 libraptor2-0 librasqal3 librdf0
  librevenge-0.0-0 libwpd-0.10-10 libwpg-0.3-3 libwps-0.4-4 libyajl2
  linux-headers-4.10.0-19 linux-headers-4.10.0-19-generic
  linux-image-4.10.0-19-generic linux-image-extra-4.10.0-19-generic
  nvidia-prime uno-libs3 ure
Use 'apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.


__________________ Configuration files of uninstalled packages: ________________

Package                      Version
ca-certificates-mono         4.6.2.7+dfsg-1ubuntu1
cairo-dock-core              3.4.1-0ubuntu1
firefox                      53.0.2+build1-0ubuntu0.17.04.2
language-pack-en-base        1:17.04+20170404
language-pack-gnome-en-base  1:17.04+20170404
libgl1-mesa-dri:i386         17.0.3-1ubuntu1
libgldi3:amd64               3.4.1-0ubuntu1
libglib2.0-cil               2.12.40-1
libgsm1:i386                 1.0.13-4
libgssapi-krb5-2:i386        1.15-1
libgtk2.0-cil                2.12.40-1
libjbig0:i386                2.1-3.1
liblockfile1:amd64           1.14-1
libmspack0:amd64             0.5-1
libogg0:i386                 1.3.2-1
libpulse0:i386               1:10.0-1ubuntu2
libreoffice-common           1:5.3.1-0ubuntu2
libreoffice-core             1:5.3.1-0ubuntu2
libsamplerate0:i386          0.1.8-8
libsasl2-modules:i386        2.1.27~101-g0780600+dfsg-2ubuntu1
libsensors4:i386             1:3.4.0-4
libspeexdsp1:i386            1.2~rc1.2-1ubuntu1
libssl1.0.0:i386             1.0.2g-1ubuntu11
libwrap0:i386                7.6.q-26
libxcursor1:i386             1:1.1.14-1
libxshmfence1:i386           1.2-1
libxxf86vm1:i386             1:1.1.4-1
mono-runtime-common          4.6.2.7+dfsg-1ubuntu1
nvidia-340                   340.102-0ubuntu3
nvidia-opencl-icd-340        340.102-0ubuntu3
unity-webapps-common         2.4.17+15.10.20150616-0ubuntu2
unity-webapps-service        2.5.0~+16.04.20160201-0ubuntu2
webbrowser-app               0.23+17.04.20170321-0ubuntu1


Use the following command to clean old configuration files:
sudo apt purge ca-certificates-mono cairo-dock-core firefox language-pack-en-base language-pack-gnome-en-base libgl1-mesa-dri:i386 libgldi3:amd64 libglib2.0-cil libgsm1:i386 libgssapi-krb5-2:i386 libgtk2.0-cil libjbig0:i386 liblockfile1:amd64 libmspack0:amd64 libogg0:i386 libpulse0:i386 libreoffice-common libreoffice-core libsamplerate0:i386 libsasl2-modules:i386 libsensors4:i386 libspeexdsp1:i386 libssl1.0.0:i386 libwrap0:i386 libxcursor1:i386 libxshmfence1:i386 libxxf86vm1:i386 mono-runtime-common nvidia-340 nvidia-opencl-icd-340 unity-webapps-common unity-webapps-service webbrowser-app


_________________________ Kernel Packages Installed __________________________

Package                              Version
linux-generic                        4.10.0.21.23
linux-headers-4.10.0-19              4.10.0-19.21
linux-headers-4.10.0-19-generic      4.10.0-19.21
linux-headers-4.10.0-20              4.10.0-20.22
linux-headers-4.10.0-20-generic      4.10.0-20.22
linux-headers-4.10.0-21              4.10.0-21.23
linux-headers-4.10.0-21-generic      4.10.0-21.23
linux-headers-generic                4.10.0.21.23
linux-image-4.10.0-19-generic        4.10.0-19.21
linux-image-4.10.0-20-generic        4.10.0-20.22
linux-image-4.10.0-21-generic        4.10.0-21.23
linux-image-extra-4.10.0-19-generic  4.10.0-19.21
linux-image-extra-4.10.0-20-generic  4.10.0-20.22
linux-image-extra-4.10.0-21-generic  4.10.0-21.23
linux-image-generic                  4.10.0.21.23


File list in /boot directory:
abi-4.10.0-19-generic
abi-4.10.0-20-generic
abi-4.10.0-21-generic
config-4.10.0-19-generic
config-4.10.0-20-generic
config-4.10.0-21-generic
grub
initrd.img-4.10.0-19-generic
initrd.img-4.10.0-20-generic
initrd.img-4.10.0-21-generic
memtest86+.bin
memtest86+.elf
memtest86+_multiboot.bin
System.map-4.10.0-19-generic
System.map-4.10.0-20-generic
System.map-4.10.0-21-generic
vmlinuz-4.10.0-19-generic
vmlinuz-4.10.0-20-generic
vmlinuz-4.10.0-21-generic


________________________ Kernel Candidates for Removal ________________________

At least two kernel versions are kept from removal including running kernel.
Hint: Check the package candidates for removal before proceeding, juste in case !

kernel versions kept:
4.10.0-21-generic (running kernel)
4.10.0-20-generic

kernel candidates for removal:
4.10.0-19-generic

Command to run in a terminal to purge the packages from the system:

sudo apt purge  linux-headers-4.10.0-19 linux-headers-4.10.0-19-generic linux-image-4.10.0-19-generic linux-image-extra-4.10.0-19-generic  

_________________________________ System Logs ________________________________

Failed services:
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.


Selection of relevent log entries:
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160930/tbfadt-658)
[    0.148035] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.154051] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.154061] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
[    0.171684] SCSI subsystem initialized
[    1.036619] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.237323] scsi host0: pata_amd
[    1.241314] scsi host1: pata_amd
[    1.241463] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    1.241464] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    1.782011] scsi host2: ahci
[    1.782162] scsi host3: ahci
[    1.782304] scsi host4: ahci
[    1.782572] scsi host5: ahci
[    2.098346] ata6: SATA link down (SStatus 0 SControl 300)
[    2.098368] ata4: SATA link down (SStatus 0 SControl 300)
[    2.098389] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.098403] ata5: SATA link down (SStatus 0 SControl 300)
[    2.099693] scsi 2:0:0:0: Direct-Access     ATA      WDC WD10EZEX-08W 1A01 PQ: 0 ANSI: 5
[    2.128232] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.128341] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.142964] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.632322] scsi host6: usb-storage 1-6:1.0
[    4.647571] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[    4.654187] scsi 6:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[    4.660937] scsi 6:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[    4.667687] scsi 6:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[    4.668228] sd 6:0:0:0: Attached scsi generic sg1 type 0
[    4.668439] sd 6:0:0:1: Attached scsi generic sg2 type 0
[    4.668627] sd 6:0:0:2: Attached scsi generic sg3 type 0
[    4.668819] sd 6:0:0:3: Attached scsi generic sg4 type 0
[    4.681823] sd 6:0:0:3: [sde] Attached SCSI removable disk
[    4.706315] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    4.707057] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[    4.708582] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[   19.426779] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   19.871875] audit: type=1400 audit(1495116086.216:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-peer-picker" pid=520 comm="apparmor_parser"
[   19.871886] audit: type=1400 audit(1495116086.216:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="content-hub-clipboard" pid=519 comm="apparmor_parser"
[   19.874318] audit: type=1400 audit(1495116086.220:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="url-dispatcher-bad-url-helper" pid=527 comm="apparmor_parser"
[   19.875114] audit: type=1400 audit(1495116086.220:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/1689/usr/lib/snapd/snap-confine" pid=525 comm="apparmor_parser"
[   19.875123] audit: type=1400 audit(1495116086.220:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/1689/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=525 comm="apparmor_parser"
[   19.875591] audit: type=1400 audit(1495116086.220:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=521 comm="apparmor_parser"
[   19.875597] audit: type=1400 audit(1495116086.220:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=521 comm="apparmor_parser"
[   19.876714] audit: type=1400 audit(1495116086.224:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=522 comm="apparmor_parser"
[   19.876721] audit: type=1400 audit(1495116086.224:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=522 comm="apparmor_parser"
[   19.876724] audit: type=1400 audit(1495116086.224:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=522 comm="apparmor_parser"
[   20.144341] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[   22.844057] snd_hda_intel 0000:00:09.0: azx_get_response timeout, switching to polling mode: last cmd=0x100f0000
[   23.848020] snd_hda_intel 0000:00:09.0: Codec #1 probe error; disabling it...


_____________________________________ Xorg ____________________________________

xinput:
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ Microsoft Microsoft® 2.4GHz Transceiver v6.0	id=9	[slave  pointer  (2)]
⎜   ↳ Microsoft Microsoft® 2.4GHz Transceiver v6.0	id=10	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Power Button                            	id=6	[slave  keyboard (3)]
    ↳ Power Button                            	id=7	[slave  keyboard (3)]
    ↳ Microsoft Microsoft® 2.4GHz Transceiver v6.0	id=8	[slave  keyboard (3)]
    ↳ Microsoft Microsoft® 2.4GHz Transceiver v6.0	id=11	[slave  keyboard (3)]
    ↳ Microsoft Microsoft® 2.4GHz Transceiver v6.0	id=12	[slave  keyboard (3)]


xrandr:
Screen 0: minimum 8 x 8, current 1280 x 720, maximum 8192 x 8192
DVI-I-0 disconnected (normal left inverted right x axis y axis)
VGA-0 connected primary 1280x720+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1280x720      59.86*+ 120.00    60.00  
   1920x1080     60.00  
   1600x1200     60.00  
   1440x900      59.89  
   1366x768      59.79  
   1280x1024     75.02  
   1280x800      59.81  
   1024x768     119.99    75.03    70.07    60.00  
   800x600      119.97    75.00    72.19    60.32    56.25  
   640x480      120.01    75.00    72.81    59.94  
DVI-I-1 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)


Selection of relevent log entries:
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    22.259] (==) No Layout section.  Using the first Screen section.
[    22.259] (==) No screen section available. Using defaults.
[    22.259] (**) |-->Screen "Default Screen Section" (0)
[    22.259] (**) |   |-->Monitor "<default monitor>"
[    22.259] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    22.262] (--) PCI:*(0:2:0:0) 10de:06e0:174b:9830 rev 161, Mem @ 0xec000000/16777216, 0xd0000000/268435456, 0xea000000/33554432, I/O @ 0x0000bf00/128, BIOS @ 0x????????/131072
[    22.262] (WW) "glamoregl" will not be loaded unless you've specified it to be loaded elsewhere.
[    22.262] (II) LoadModule: "glx"
[    22.262] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so
[    24.325] (II) LoadModule: "nvidia"
[    24.325] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/nvidia_drv.so
[    24.449] (II) LoadModule: "nouveau"
[    24.449] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    24.465] (II) LoadModule: "modesetting"
[    24.465] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    24.465] (II) LoadModule: "fbdev"
[    24.465] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    24.465] (II) LoadModule: "vesa"
[    24.465] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    24.472] (II) Loading sub module "fb"
[    24.472] (II) LoadModule: "fb"
[    24.472] (II) Loading /usr/lib/xorg/modules/libfb.so
[    24.473] (II) Loading sub module "wfb"
[    24.473] (II) LoadModule: "wfb"
[    24.473] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    24.473] (II) Loading sub module "ramdac"
[    24.473] (II) LoadModule: "ramdac"
[    24.473] (WW) Falling back to old probe method for modesetting
[    24.473] (WW) Falling back to old probe method for fbdev
[    24.473] (II) Loading sub module "fbdevhw"
[    24.473] (II) LoadModule: "fbdevhw"
[    24.484] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    24.485] (EE) open /dev/fb0: No such file or directory
[    24.485] (WW) Falling back to old probe method for vesa
[    24.485] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    25.366] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 720
[    25.397] (WW) NVIDIA(0): Acer H5380BD (CRT-1)'s EDID does not contain a maximum image
[    25.397] (WW) NVIDIA(0):     size; cannot compute DPI from Acer H5380BD (CRT-1)'s
[    25.398] (WW) NVIDIA(0):     EDID.
[    25.398] (II) UnloadModule: "nouveau"
[    25.398] (II) UnloadModule: "modesetting"
[    25.398] (II) UnloadModule: "fbdev"
[    25.398] (II) UnloadModule: "vesa"
[    25.525] (II) Loading sub module "dri2"
[    25.525] (II) LoadModule: "dri2"
[    25.665] (II) LoadModule: "libinput"
[    25.666] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so


GPU Manager logs:
log_file: /var/log/gpu-manager.log
last_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
new_boot_file: /var/lib/ubuntu-drivers-common/last_gfx_boot
can't access /run/u-d-c-fglrx-was-loaded file
Looking for fglrx modules in /lib/modules/4.10.0-21-generic/updates/dkms
Looking for nvidia modules in /lib/modules/4.10.0-21-generic/updates/dkms
Found nvidia module: nvidia_304.ko
Is nvidia loaded? yes
Was nvidia unloaded? no
Is nvidia blacklisted? no
Is fglrx loaded? no
Was fglrx unloaded? no
Is fglrx blacklisted? no
Is intel loaded? no
Is radeon loaded? no
Is radeon blacklisted? no
Is amdgpu loaded? no
Is amdgpu blacklisted? no
Is nouveau loaded? no
Is nouveau blacklisted? yes
Is fglrx kernel module available? no
Is nvidia kernel module available? yes
Vendor/Device Id: 10de:6e0
BusID "PCI:2@0:0:0"
Is boot vga? yes
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Skipping "/dev/dri/card0", driven by "nvidia-drm"
Does it require offloading? no
last cards number = 1
Has amd? no
Has intel? no
Has nvidia? yes
How many cards? 1
Has the system changed? No
main_arch_path x86_64-linux-gnu, other_arch_path i386-linux-gnu
Current alternative: /usr/lib/nvidia-304/ld.so.conf
Current core alternative: (null)
Current egl alternative: /usr/lib/x86_64-linux-gnu/mesa-egl/ld.so.conf
Is nvidia enabled? yes
Is nvidia egl enabled? no
Is fglrx enabled? no
Is mesa enabled? no
Is mesa egl enabled? yes
Is pxpress enabled? no
Is prime enabled? no
Is prime egl enabled? no
Is nvidia available? yes
Is nvidia egl available? no
Is fglrx available? no
Is fglrx-core available? no
Is mesa available? yes
Is mesa egl available? yes
Is pxpress available? no
Is prime available? no
Is prime egl available? no
Single card detected
Driver is already loaded and enabled
Nothing to do
No change - nothing to do


============================ Disks SMART Attributes ===========================



### ATA disks: sda

# Drive sda:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-21-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Blue
Device Model:     WDC WD10EZEX-08WN4A0
LU WWN Device Id: 5 0014ee 2636531d0
Firmware Version: 01.01A01
User Capacity:    1 000 204 886 016 bytes [1,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Thu May 18 17:48:46 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0
  3 Spin_Up_Time            POS--K   179   173   021    -    2008
  4 Start_Stop_Count        -O--CK   100   100   000    -    29
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    363
 10 Spin_Retry_Count        -O--CK   100   253   000    -    0
 11 Calibration_Retry_Count -O--CK   100   253   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    29
192 Power-Off_Retract_Count -O--CK   200   200   000    -    22
193 Load_Cycle_Count        -O--CK   200   200   000    -    417
194 Temperature_Celsius     -O---K   105   100   000    -    38
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   200   200   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   200   200   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

SMART Error Log Version: 1
No Errors Logged



### USB disks: sdb sdc sdd sde

# Drive sdb:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-21-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported field in scsi command

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

# Drive sdc:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-21-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported field in scsi command

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

# Drive sdd:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-21-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

Read Device Identity failed: scsi error unsupported field in scsi command

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

# Drive sde:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-21-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error unsupported field in scsi command
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

Edit 17:57
J'ai entre temps changé pour les drivers 304 de NVidia car j'ai cru comprendre qu'ils offraient une meilleure compatibilité avec Ubuntu.

Dernière modification par abhdfr (Le 18/05/2017, à 16:57)

Hors ligne

#6 Le 18/05/2017, à 17:32

abelthorne

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

Tu as fait combien de passes avec Memtest ?

Hors ligne

#7 Le 18/05/2017, à 19:04

abhdfr

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

Il y a eu 10 passes de faites avec Memtestx64

Hors ligne

#8 Le 18/05/2017, à 19:48

abelthorne

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

Ok, donc la RAM est a priori bonne.

Hors ligne

#9 Le 18/05/2017, à 19:51

abhdfr

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

Oui, je ne sais plus trop où chercher, d'autant plus que je ne fais rien de bien particulier au moment où ça freeze.
Concernant les pilotes NVidia, dois-je rester en v.304 ou le dernier proposé par le système ?

Hors ligne

#10 Le 18/05/2017, à 19:57

lepetit

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

d'après le site nvidia, les derniers pour ta carte sont les 340.102
donc installe ceux là


-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10

Hors ligne

#11 Le 18/05/2017, à 21:12

tarkan99

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

le swap est un peu utilisé.

que donne

sudo swapon -s
ls -all  /swapfile

en condition normale.


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#12 Le 18/05/2017, à 22:00

abhdfr

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

J'ai donc remis le pilote v340 depuis les pilotes additionnels.

adrien@adrien-IMEDIA-X2750:~$ sudo swapon -s
[sudo] Mot de passe de adrien : 
Filename				Type		Size	Used	Priority
/swapfile                              	file    	2097148	406424	-1
adrien@adrien-IMEDIA-X2750:~$ ls -all  /swapfile
-rw------- 1 root root 2147483648 avril 26 23:54 /swapfile

Hors ligne

#13 Le 19/05/2017, à 06:13

tarkan99

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

pour éliminer la piste, si les freeze revient, peux-tu tenter cette modif

gksu gedit /etc/default/grub

(installer gksu si besoin)

et éditer la ligne GRUB_CMDLINE_LINUX_DEFAULT pour ajouter
intel_idle.max_cstate=1 dans le contenu existant de GRUB_CMDLINE_LINUX_DEFAULT

Puis, rafraîchit le grub

sudo update-grub

et reboot

si ça résoud pas le problème, revient en arrière, cette modif risque de faire baisser la conso et chauffer le CPU
C'est censé s'appliquer uniquement aux CPU baytrail mais bon on peut toujours tenter....

pour annuler la modif, tu supprimes l'ajout dans grub puis

sudo update-grub

et reboot

Dernière modification par tarkan99 (Le 19/05/2017, à 06:14)


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#14 Le 19/05/2017, à 18:01

abhdfr

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

Bonjour,
j'ai tenté la modification GRUB et le système se coupe tout seul au bout d'un moment. Je pense que c'est dû à, comme tu l'avais prédit, une surchauffe du CPU.

Hors ligne

#15 Le 19/05/2017, à 19:34

tarkan99

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

tu as réussi à faire marche arrière sur la modif du grub ?


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#16 Le 19/05/2017, à 19:41

nam1962

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

L'ordi est il complètement dépoussiéré ?
As-tu réglé la swappiness ?
Peut tu donner :

cat /etc/apt/sources.list
ls /etc/apt/sources.list.d -1

[ Modéré ]

Hors ligne

#17 Le 20/05/2017, à 06:01

moko138

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

abhdfr a écrit :

Les freezes intervenant aléatoirement lorsque je navigue sur le net (pas de stream vidéo), je me suis dit que ça venait de Firefox, que j'ai donc désinstallé et remplacé par Chromium, en vain.

Comme tu n'as pas précisé ta variante, je suppose que tu utilises la variante principale : Ubuntu.
Le confirmes-tu ?
Cette variante est gourmande en RAM.
Tu as 3 Gio de RAM.
Tu n'as pas de partition swap mais un swapfile, plus lent.
Ton swappiness est encore à 60.
chromium est plus gourmand en ram que firefox.
Tu n'as pas mentionné l'extension noscript ni aucun autre bloqueur de javascripts.


À mon avis,
c'est ta RAM qui est mise à genoux par ta navigation.
Donc il convient :
   -1 d'abaisser ton swappiness, comme l'a dit nam1962. Par exemple :

echo vm.swappiness=10 | sudo tee -a /etc/sysctl.conf

suivi d'un redémarrage.
   -2 de remettre firefox à la place de chromium,
   -3 et d'installer et d'apprendre à utiliser son extension noscript, pour éviter que firefox laisse tourner des tas de javascripts inutiles, indiscrets et gourmands en ressources.
Paramètre-la comme indiqué là ./viewtopic.php?pid=18711521#p18711521  et là ./viewtopic.php?pid=20506971#p20506971 (et dans les messages suivants).


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#18 Le 20/05/2017, à 07:02

tarkan99

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

je serais quand même surpris que le swap soit en cause mais il est bon d'éliminer la piste.
Quand le système utilise le swap, il est certe plus lent mais il n'est pas censé figer, sinon le mécanisme du swap ne sert à rien.

par rapport à l'extension noscript, je serais un peu moins intégriste et proposerais u block origin.
La navigation sans javascript à l'heure actuelle, c'est un peu galère....

question "Tu n'as pas de partition swap mais un swapfile, plus lent." en quoi un fichier de swap est plus lent qu'une partition ?


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#19 Le 20/05/2017, à 14:55

moko138

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

tarkan99 a écrit :

question "Tu n'as pas de partition swap mais un swapfile, plus lent." en quoi un fichier de swap est plus lent qu'une partition ?

Je ne sais plus. J'ai lu ça jadis...

tarkan99 a écrit :

La navigation sans javascript à l'heure actuelle, c'est un peu galère....

Il ne s'agit aucunement de naviguer sans javascript ! Au contraire !
Il s'agit de choisir ceux, utiles et légitimes, qu'on laisse tourner et mobiliser le CPU et la RAM, et d'exclure les intrus !
Puisque tu ne fais pas encore la différence, je t'invite à suivre les liens.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#20 Le 20/05/2017, à 20:36

tarkan99

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

je comprend et je comprend qu'on puisse l'utiliser. Mais trop de réglages pour moi.


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#21 Le 20/05/2017, à 21:03

nam1962

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

+1 : ublock origin, betterprivacy & selfdestructing-cookies me suffisent amplement. NoScript est super, mais quand tu veux bosser et faire des transactions... roll


[ Modéré ]

Hors ligne

#22 Le 22/05/2017, à 19:48

abhdfr

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

Bonjour, désolé pour le retard de réponse.
Voici le source.list

# deb cdrom:[Ubuntu 17.04 _Zesty Zapus_ - Release amd64 (20170412)]/ zesty main restricted

# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ zesty main restricted
# deb-src http://fr.archive.ubuntu.com/ubuntu/ zesty main restricted

## Major bug fix updates produced after the final release of the
## distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ zesty-updates main restricted
# deb-src http://fr.archive.ubuntu.com/ubuntu/ zesty-updates main restricted

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ zesty universe
# deb-src http://fr.archive.ubuntu.com/ubuntu/ zesty universe
deb http://fr.archive.ubuntu.com/ubuntu/ zesty-updates universe
# deb-src http://fr.archive.ubuntu.com/ubuntu/ zesty-updates universe

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu 
## team, and may not be under a free licence. Please satisfy yourself as to 
## your rights to use the software. Also, please note that software in 
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://fr.archive.ubuntu.com/ubuntu/ zesty multiverse
# deb-src http://fr.archive.ubuntu.com/ubuntu/ zesty multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ zesty-updates multiverse
# deb-src http://fr.archive.ubuntu.com/ubuntu/ zesty-updates multiverse

## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ zesty-backports main restricted universe multiverse
# deb-src http://fr.archive.ubuntu.com/ubuntu/ zesty-backports main restricted universe multiverse

## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
# deb http://archive.canonical.com/ubuntu zesty partner
# deb-src http://archive.canonical.com/ubuntu zesty partner

deb http://security.ubuntu.com/ubuntu zesty-security main restricted
# deb-src http://security.ubuntu.com/ubuntu zesty-security main restricted
deb http://security.ubuntu.com/ubuntu zesty-security universe
# deb-src http://security.ubuntu.com/ubuntu zesty-security universe
deb http://security.ubuntu.com/ubuntu zesty-security multiverse
# deb-src http://security.ubuntu.com/ubuntu zesty-security multiverse

Le ls /etc/apt/sources.list.d -1

alexmurray-ubuntu-indicator-sensors-zesty.list
alexmurray-ubuntu-indicator-sensors-zesty.list.save
nilarimogard-ubuntu-webupd8-zesty.list
nilarimogard-ubuntu-webupd8-zesty.list.save
noobslab-ubuntu-themes-zesty.list
noobslab-ubuntu-themes-zesty.list.save
tualatrix-ubuntu-ppa-zesty.list
tualatrix-ubuntu-ppa-zesty.list.save

J'ai fait

echo vm.swappiness=10 | sudo tee -a /etc/sysctl.conf

en attente de voir si ça freeze encore.

Concernant Firefox et les extensions utilisées, je suis un peu perdu. Noscript ou u Block origin ?
De plus, en quoi serai-ce utile dans la mesure ou il peut arriver que le freeze intervienne sans même que le navigateur soit ouvert (LibreOffice par exemple, ou Thunderbird).

Hors ligne

#23 Le 22/05/2017, à 20:42

lepetit

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

l'idéal serait que tu puisses tester avec une autre alim


-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10

Hors ligne

#24 Le 22/05/2017, à 20:53

tarkan99

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

De plus, en quoi serai-ce utile dans la mesure ou il peut arriver que le freeze intervienne sans même que le navigateur soit ouvert (LibreOffice par exemple, ou Thunderbird).

tu as raison, aucun rapport, juste des digressions. désolé.


xubuntu 22.04.1 sur machine assemblée base de Core i5 9400

Hors ligne

#25 Le 23/05/2017, à 07:05

nam1962

Re : [RÉSOLU] Freeze Ubuntu, la faute à la carte graphique ?

Bon...

Déjà, dans les sources, il est toujours mieux d'activer les dépôts partenaires (partners)

Pourquoi es tu en 17.04 et non en 16.04 LTS ?

Sinon, tes PPA sont dégoûtants !

Alexmurray est obsolète et pas maintenu depuis 2014
Tualatrix idem (Ubuntu Tweak est déprécié et abandonné depuis 2014 aussi !)
Nilarimogard contient une masse de paquets et dépendances bidouillées, c'est pire que les proposed !

Pour les obsolète, on doit bidouiller, je te suggère de :
désinstaller les sensors
désinstaller ubuntu tweak
puis virer leurs PPA

sudo rm /etc/apt/sources.list.d/alexmurray*
sudo rm /etc/apt/sources.list.d/tualatrix*

Pour Nilarimogard on va tout nettoyer :

sudo apt install ppa-purge
sudo ppa-purge ppa:nilarimogard/webupd8

Puis tu passeras

sudo apt autoremove
sudo apt clean
sudo apt update
sudo apt full-upgrade

Dernière modification par nam1962 (Le 11/06/2017, à 20:00)


[ Modéré ]

Hors ligne