#1 Le 21/05/2017, à 13:20
- Coeur Noir
Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
Hello,
c'est un souci qui me tarabuste depuis un moment déjà, sous 14.04 comme 16.04 :
- je ne sais pas lire les cartes SD(HC) de mes appareils photos directement sur mon pc,
- pour récupérer mes photos je branche l'APN via cable USB.
Les APN sont des nikon, un D3200 et un CoolPix s8200. Les images sont enregistrées en jpeg seul ( pas de raw/nef ).
Je n'ai pas de windows sous la main pour éventuellement comparer le comportement du lecteur de cartes - ums-realtek.
Dans ce lecteur de cartes j'arrive à lire des mini SD ( non HC ) provenant d'appareils android. Ou des cartes XD provenant d'APN Olympus.
Je soupçonne une astuce du point de vue du formatage des cartes dans les appareils Nikon. Ou un paramètre à renseigner dans le module du lecteur de cartes, ou encore un paramètre à passer au bios concernant ehci-pci ?
exfat-fuse et exfat-utils sont bien installés sur mes systèmes.
Toute piste ou idée bienvenue… notamment s'il y a des « nikonistes » parmi vous.
Le dmesg complet :
[ 0.000000] microcode: microcode updated early to revision 0x1e, date = 2015-08-13
[ 0.000000] Linux version 4.8.0-52-generic (buildd@lgw01-59) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #55~16.04.1-Ubuntu SMP Fri Apr 28 14:36:29 UTC 2017 (Ubuntu 4.8.0-52.55~16.04.1-generic 4.8.17)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-52-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c5398fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c5399000-0x00000000c539ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c53a0000-0x00000000c57f3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c57f4000-0x00000000c5c54fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c5c55000-0x00000000d8644fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d8645000-0x00000000d884dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d884e000-0x00000000d8866fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d8867000-0x00000000d8da7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d8da8000-0x00000000d9ffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUS All Series/Z87-C, BIOS 2103 08/15/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00DC000000 mask 7FFC000000 uncachable
[ 0.000000] 4 base 00DB000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 041FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] total RAM covered: 16302M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 9 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xda000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd880-0x000fd88f] mapped at [ffff8ca5400fd880]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff8ca540097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x30f03b000, 0x30f03bfff] PGTABLE
[ 0.000000] BRK [0x30f03c000, 0x30f03cfff] PGTABLE
[ 0.000000] BRK [0x30f03d000, 0x30f03dfff] PGTABLE
[ 0.000000] BRK [0x30f03e000, 0x30f03efff] PGTABLE
[ 0.000000] BRK [0x30f03f000, 0x30f03ffff] PGTABLE
[ 0.000000] BRK [0x30f040000, 0x30f040fff] PGTABLE
[ 0.000000] BRK [0x30f041000, 0x30f041fff] PGTABLE
[ 0.000000] BRK [0x30f042000, 0x30f042fff] PGTABLE
[ 0.000000] BRK [0x30f043000, 0x30f043fff] PGTABLE
[ 0.000000] BRK [0x30f044000, 0x30f044fff] PGTABLE
[ 0.000000] BRK [0x30f045000, 0x30f045fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3325e000-0x35926fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000D8853080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000D8861838 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000D8853198 00E699 (v02 ALASKA A M I 00000031 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000D8DA6080 000040
[ 0.000000] ACPI: APIC 0x00000000D8861948 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000D88619E0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: LPIT 0x00000000D8861A28 00005C (v01 ALASKA A M I 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D8861A88 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000D8861FC8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20091112)
[ 0.000000] ACPI: MCFG 0x00000000D8862AA0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000D8862AE0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D8862B18 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000D8862E88 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: BGRT 0x00000000D88663C8 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41fdfb000-0x41fdfffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c5398fff]
[ 0.000000] node 0: [mem 0x00000000c53a0000-0x00000000c57f3fff]
[ 0.000000] node 0: [mem 0x00000000c5c55000-0x00000000d8644fff]
[ 0.000000] node 0: [mem 0x00000000d9fff000-0x00000000d9ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
[ 0.000000] On node 0 totalpages: 4161402
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13768 pages used for memmap
[ 0.000000] DMA32 zone: 881118 pages, LIFO batch:31
[ 0.000000] Normal zone: 51192 pages used for memmap
[ 0.000000] Normal zone: 3276288 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000db200000-0x00000000df1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc5399000-0xc539ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc57f4000-0xc5c54fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8645000-0xd884dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd884e000-0xd8866fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8867000-0xd8da7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8da8000-0xd9ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff8ca95fa00000 s107864 r8192 d31400 u262144
[ 0.000000] pcpu-alloc: s107864 r8192 d31400 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4096357
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-52-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16257472K/16645608K available (8829K kernel code, 1441K rwdata, 3836K rodata, 1548K init, 1296K bss, 388136K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3497.716 MHz processor
[ 0.000016] Calibrating delay loop (skipped), value calculated using timer frequency.. 6995.43 BogoMIPS (lpj=13990864)
[ 0.000017] pid_max: default: 32768 minimum: 301
[ 0.000024] ACPI: Core revision 20160422
[ 0.007763] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.007781] Security Framework initialized
[ 0.007782] Yama: becoming mindful.
[ 0.007793] AppArmor: AppArmor initialized
[ 0.008295] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.010374] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011313] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.011322] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.011534] CPU: Physical Processor ID: 0
[ 0.011535] CPU: Processor Core ID: 0
[ 0.011537] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.011538] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.011541] mce: CPU supports 9 MCE banks
[ 0.011547] CPU0: Thermal monitoring enabled (TM1)
[ 0.011558] process: using mwait in idle threads
[ 0.011560] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.011560] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.011935] Freeing SMP alternatives memory: 32K (ffffffff910ed000 - ffffffff910f5000)
[ 0.013275] ftrace: allocating 33454 entries in 131 pages
[ 0.023517] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.023518] smpboot: Max logical packages: 2
[ 0.023879] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063563] TSC deadline timer enabled
[ 0.063565] smpboot: CPU0: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.063567] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.063592] ... version: 3
[ 0.063592] ... bit width: 48
[ 0.063592] ... generic registers: 4
[ 0.063593] ... value mask: 0000ffffffffffff
[ 0.063593] ... max period: 00007fffffffffff
[ 0.063593] ... fixed-purpose events: 3
[ 0.063594] ... event mask: 000000070000000f
[ 0.064176] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.064221] x86: Booting SMP configuration:
[ 0.064222] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.083923] x86: Booted up 1 node, 8 CPUs
[ 0.083924] smpboot: Total of 8 processors activated (55963.45 BogoMIPS)
[ 0.090932] devtmpfs: initialized
[ 0.090972] x86/mm: Memory block size: 128MB
[ 0.092870] evm: security.selinux
[ 0.092870] evm: security.SMACK64
[ 0.092870] evm: security.SMACK64EXEC
[ 0.092871] evm: security.SMACK64TRANSMUTE
[ 0.092871] evm: security.SMACK64MMAP
[ 0.092871] evm: security.ima
[ 0.092871] evm: security.capability
[ 0.092905] PM: Registering ACPI NVS region [mem 0xc5399000-0xc539ffff] (28672 bytes)
[ 0.092906] PM: Registering ACPI NVS region [mem 0xd8867000-0xd8da7fff] (5509120 bytes)
[ 0.092992] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.093022] pinctrl core: initialized pinctrl subsystem
[ 0.093094] RTC time: 10:41:23, date: 05/21/17
[ 0.093153] NET: Registered protocol family 16
[ 0.106588] cpuidle: using governor ladder
[ 0.122598] cpuidle: using governor menu
[ 0.122599] PCCT header not found.
[ 0.122618] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.122619] ACPI: bus type PCI registered
[ 0.122619] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.122657] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.122658] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.122664] PCI: Using configuration type 1 for base access
[ 0.122703] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.138670] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.138670] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.138808] ACPI: Added _OSI(Module Device)
[ 0.138809] ACPI: Added _OSI(Processor Device)
[ 0.138809] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.138809] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.138937] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.141701] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.142216] ACPI: Dynamic OEM Table Load:
[ 0.142219] ACPI: SSDT 0xFFFF8CA94D3DBC00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
[ 0.142640] ACPI: Dynamic OEM Table Load:
[ 0.142643] ACPI: SSDT 0xFFFF8CA94D3E6000 0005AA (v01 PmRef ApIst 00003000 INTL 20091112)
[ 0.143086] ACPI: Dynamic OEM Table Load:
[ 0.143088] ACPI: SSDT 0xFFFF8CA94CC54E00 000119 (v01 PmRef ApCst 00003000 INTL 20091112)
[ 0.144313] ACPI: Interpreter enabled
[ 0.144333] ACPI: (supports S0 S3 S4 S5)
[ 0.144333] ACPI: Using IOAPIC for interrupt routing
[ 0.144351] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.149838] ACPI: Power Resource [FN00] (off)
[ 0.149886] ACPI: Power Resource [FN01] (off)
[ 0.149932] ACPI: Power Resource [FN02] (off)
[ 0.149978] ACPI: Power Resource [FN03] (off)
[ 0.150024] ACPI: Power Resource [FN04] (off)
[ 0.150549] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.150552] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.150656] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.150734] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.150735] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.150962] PCI host bridge to bus 0000:00
[ 0.150964] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.150964] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.150965] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.150966] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.150966] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.150967] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.150968] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.150968] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.150969] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.150969] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.150970] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.150975] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.151031] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.151054] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.151105] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.151130] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[ 0.151137] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.151141] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.151143] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.151194] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.151199] pci 0000:00:03.0: reg 0x10: [mem 0xf7e04000-0xf7e07fff 64bit]
[ 0.151270] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.151284] pci 0000:00:16.0: reg 0x10: [mem 0xf7e0e000-0xf7e0e00f 64bit]
[ 0.151335] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.151387] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.151400] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e0c000-0xf7e0c3ff]
[ 0.151469] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.151503] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.151528] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.151540] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e00000-0xf7e03fff 64bit]
[ 0.151596] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.151621] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.151644] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.151695] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.151740] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.151764] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.151816] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.151859] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.151881] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
[ 0.151933] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.151976] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.152000] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[ 0.152051] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.152094] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.152119] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.152133] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e0b000-0xf7e0b3ff]
[ 0.152203] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.152235] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.152260] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
[ 0.152387] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.152397] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.152402] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.152408] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.152413] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.152418] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.152423] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e0a000-0xf7e0a7ff]
[ 0.152451] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.152492] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.152503] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e09000-0xf7e090ff 64bit]
[ 0.152519] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.152593] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.152637] acpiphp: Slot [1] registered
[ 0.152640] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.152695] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.152712] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.152737] pci 0000:03:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit]
[ 0.152753] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.152837] pci 0000:03:00.0: supports D1 D2
[ 0.152838] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.152872] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.162630] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.162632] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.162634] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.162638] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.162682] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[ 0.162771] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.162791] pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)
[ 0.162797] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.162798] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.162798] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.162799] pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.162800] pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.162800] pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.162801] pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.162802] pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.162802] pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.162803] pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.162889] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.162905] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.162906] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.162906] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.162907] pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.162908] pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.162908] pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.162909] pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.162909] pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.162910] pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.162911] pci 0000:04:00.0: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.162971] pci 0000:06:00.0: [168c:002e] type 00 class 0x028000
[ 0.162993] pci 0000:06:00.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[ 0.163105] pci 0000:06:00.0: supports D1
[ 0.163106] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[ 0.163137] pci 0000:06:00.0: System wakeup disabled by ACPI
[ 0.174634] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.174638] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.175156] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.175185] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.175214] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.175241] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.175270] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.175297] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.175325] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.175352] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.175553] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.175678] SCSI subsystem initialized
[ 0.175697] libata version 3.00 loaded.
[ 0.175716] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.175717] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.175718] vgaarb: loaded
[ 0.175718] vgaarb: bridge control possible 0000:00:02.0
[ 0.175729] ACPI: bus type USB registered
[ 0.175739] usbcore: registered new interface driver usbfs
[ 0.175743] usbcore: registered new interface driver hub
[ 0.175754] usbcore: registered new device driver usb
[ 0.175810] PCI: Using ACPI for IRQ routing
[ 0.176942] PCI: pci_cache_line_size set to 64 bytes
[ 0.176975] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.176976] e820: reserve RAM buffer [mem 0xc5399000-0xc7ffffff]
[ 0.176977] e820: reserve RAM buffer [mem 0xc57f4000-0xc7ffffff]
[ 0.176977] e820: reserve RAM buffer [mem 0xd8645000-0xdbffffff]
[ 0.176978] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
[ 0.176978] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
[ 0.177035] NetLabel: Initializing
[ 0.177035] NetLabel: domain hash size = 128
[ 0.177035] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.177043] NetLabel: unlabeled traffic allowed by default
[ 0.177092] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.177095] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.179112] clocksource: Switched to clocksource hpet
[ 0.183887] VFS: Disk quotas dquot_6.6.0
[ 0.183898] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.183961] AppArmor: AppArmor Filesystem Enabled
[ 0.183991] pnp: PnP ACPI init
[ 0.184049] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.184052] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.184160] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.184161] system 00:01: [io 0xffff] has been reserved
[ 0.184162] system 00:01: [io 0xffff] has been reserved
[ 0.184162] system 00:01: [io 0xffff] has been reserved
[ 0.184163] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.184164] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.184164] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.184165] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.184166] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.184166] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.184168] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.184182] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.184211] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.184212] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.184261] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.184262] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.184292] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.184293] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.184428] pnp 00:06: [dma 0 disabled]
[ 0.184455] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.184480] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.184739] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.184740] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.184741] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.184741] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.184742] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.184743] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.184744] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.184744] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.184745] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.184746] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.184747] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.184747] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.184749] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.184881] pnp: PnP ACPI: found 9 devices
[ 0.190308] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.190343] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.190348] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.190355] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.190357] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.190360] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.190362] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.190365] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.190380] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[ 0.190388] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.190391] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.190397] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.190397] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.190398] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.190399] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.190399] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.190400] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.190401] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.190401] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.190402] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.190402] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.190403] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.190404] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.190405] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.190405] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.190406] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.190407] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.190407] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.190408] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.190408] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.190409] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.190410] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.190410] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.190411] pci_bus 0000:04: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.190412] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.190412] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.190413] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.190413] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.190414] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.190415] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.190415] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.190416] pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.190417] pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.190417] pci_bus 0000:05: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.190418] pci_bus 0000:06: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.190437] NET: Registered protocol family 2
[ 0.190548] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.190675] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.190783] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.190799] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.190832] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.190883] NET: Registered protocol family 1
[ 0.190892] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.235187] PCI: CLS 64 bytes, default 64
[ 0.235214] Unpacking initramfs...
[ 0.624340] Freeing initrd memory: 39716K (ffff8ca57325e000 - ffff8ca575927000)
[ 0.624343] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.624344] software IO TLB [mem 0xd4645000-0xd8645000] (64MB) mapped at [ffff8ca614645000-ffff8ca618644fff]
[ 0.624548] Scanning for low memory corruption every 60 seconds
[ 0.624758] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.624781] audit: initializing netlink subsys (disabled)
[ 0.624790] audit: type=2000 audit(1495363283.616:1): initialized
[ 0.625042] Initialise system trusted keyrings
[ 0.625095] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.625988] zbud: loaded
[ 0.626232] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.626343] fuse init (API version 7.25)
[ 0.626419] Allocating IMA blacklist keyring.
[ 0.627024] Key type asymmetric registered
[ 0.627025] Asymmetric key parser 'x509' registered
[ 0.627043] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.627062] io scheduler noop registered
[ 0.627062] io scheduler deadline registered (default)
[ 0.627066] io scheduler cfq registered
[ 0.627472] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.627475] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.627493] intel_idle: MWAIT substates: 0x42120
[ 0.627494] intel_idle: v0.4.1 model 0x3C
[ 0.627660] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.627711] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.627713] ACPI: Power Button [PWRB]
[ 0.627734] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.627735] ACPI: Power Button [PWRF]
[ 0.628179] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.628180] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.628317] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.628317] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.628331] GHES: HEST is not enabled!
[ 0.628372] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.648792] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.649626] Linux agpgart interface v0.103
[ 0.650841] loop: module loaded
[ 0.650931] libphy: Fixed MDIO Bus: probed
[ 0.650931] tun: Universal TUN/TAP device driver, 1.6
[ 0.650932] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.650949] PPP generic driver version 2.4.2
[ 0.650970] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.650974] ehci-pci: EHCI PCI platform driver
[ 0.651034] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.651038] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.651046] ehci-pci 0000:00:1a.0: debug port 2
[ 0.654956] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.654963] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7e0c000
[ 0.667187] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.667222] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.667222] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.667223] usb usb1: Product: EHCI Host Controller
[ 0.667224] usb usb1: Manufacturer: Linux 4.8.0-52-generic ehci_hcd
[ 0.667224] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.667291] hub 1-0:1.0: USB hub found
[ 0.667293] hub 1-0:1.0: 2 ports detected
[ 0.667433] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.667436] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.667444] ehci-pci 0000:00:1d.0: debug port 2
[ 0.671344] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.671350] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e0b000
[ 0.687174] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.687189] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.687190] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.687191] usb usb2: Product: EHCI Host Controller
[ 0.687191] usb usb2: Manufacturer: Linux 4.8.0-52-generic ehci_hcd
[ 0.687192] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.687253] hub 2-0:1.0: USB hub found
[ 0.687255] hub 2-0:1.0: 2 ports detected
[ 0.687323] ehci-platform: EHCI generic platform driver
[ 0.687329] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.687330] ohci-pci: OHCI PCI platform driver
[ 0.687335] ohci-platform: OHCI generic platform driver
[ 0.687339] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.687368] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.687369] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.687990] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.688044] mousedev: PS/2 mouse device common for all mice
[ 0.688117] rtc_cmos 00:02: RTC can wake from S4
[ 0.688213] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.688232] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.688235] i2c /dev entries driver
[ 0.688263] device-mapper: uevent: version 1.0.3
[ 0.688296] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 0.688299] intel_pstate: Intel P-state driver initializing
[ 0.688607] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.688952] NET: Registered protocol family 10
[ 0.689145] NET: Registered protocol family 17
[ 0.689149] Key type dns_resolver registered
[ 0.689316] microcode: sig=0x306c3, pf=0x2, revision=0x1e
[ 0.689460] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.689541] registered taskstats version 1
[ 0.689543] Loading compiled-in X.509 certificates
[ 0.691314] Loaded X.509 cert 'Build time autogenerated kernel key: b2e5ac4e062fe412675f5b442a7ba1394ee14efb'
[ 0.691327] zswap: loaded using pool lzo/zbud
[ 0.699785] Key type big_key registered
[ 0.700873] Key type trusted registered
[ 0.702074] Key type encrypted registered
[ 0.702076] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.702077] ima: No TPM chip found, activating TPM-bypass!
[ 0.702090] evm: HMAC attrs: 0x1
[ 0.702373] Magic number: 1:763:679
[ 0.702480] rtc_cmos 00:02: setting system clock to 2017-05-21 10:41:24 UTC (1495363284)
[ 0.702531] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.702531] EDD information not available.
[ 0.702565] PM: Hibernation image not present or could not be loaded.
[ 0.703276] Freeing unused kernel memory: 1548K (ffffffff90f6a000 - ffffffff910ed000)
[ 0.703276] Write protecting the kernel read-only data: 14336k
[ 0.703533] Freeing unused kernel memory: 1396K (ffff8ca84e6a3000 - ffff8ca84e800000)
[ 0.703918] Freeing unused kernel memory: 260K (ffff8ca84ebbf000 - ffff8ca84ec00000)
[ 0.708089] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.715079] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.715199] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.715258] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.715264] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.715630] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.715636] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.715649] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.715652] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.715657] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.715660] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.715747] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.731350] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.732738] wmi: Mapper loaded
[ 0.739054] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.739060] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.739753] ahci 0000:00:1f.2: version 3.0
[ 0.739887] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x35 impl SATA mode
[ 0.739888] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.741050] [drm] Initialized drm 1.1.0 20060810
[ 0.752055] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffa8d38000e000, 74:d0:2b:9e:fb:40, XID 0c000800 IRQ 26
[ 0.752056] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.752394] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 0.775634] scsi host0: ahci
[ 0.775704] scsi host1: ahci
[ 0.775753] scsi host2: ahci
[ 0.775799] scsi host3: ahci
[ 0.775844] scsi host4: ahci
[ 0.775888] scsi host5: ahci
[ 0.775915] ata1: SATA max UDMA/133 abar m2048@0xf7e0a000 port 0xf7e0a100 irq 25
[ 0.775915] ata2: DUMMY
[ 0.775917] ata3: SATA max UDMA/133 abar m2048@0xf7e0a000 port 0xf7e0a200 irq 25
[ 0.775917] ata4: DUMMY
[ 0.775918] ata5: SATA max UDMA/133 abar m2048@0xf7e0a000 port 0xf7e0a300 irq 25
[ 0.775919] ata6: SATA max UDMA/133 abar m2048@0xf7e0a000 port 0xf7e0a380 irq 25
[ 0.776156] [drm] Memory usable by graphics device = 2048M
[ 0.776157] [drm] Replacing VGA console driver
[ 0.776672] Console: switching to colour dummy device 80x25
[ 0.781229] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.781229] [drm] Driver supports precise vblank timestamp query.
[ 0.783447] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.916056] random: fast init done
[ 0.981961] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.982247] acpi device:60: registered as cooling_device13
[ 0.982300] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 0.982340] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
[ 0.995208] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.015179] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.089380] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.089401] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.089422] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.089435] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.089794] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 1.089806] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff8ca94f0e4e88), AE_NOT_FOUND (20160422/psparse-542)
[ 1.089950] ata6.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[ 1.089951] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.090384] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 1.090387] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff8ca94f0e4e88), AE_NOT_FOUND (20160422/psparse-542)
[ 1.090393] ata3.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3MA, max UDMA/133
[ 1.090394] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.090522] ata6.00: configured for UDMA/133
[ 1.091033] ata1.00: ATAPI: ATAPI iHAS124 Y, BL0V, max UDMA/100
[ 1.091267] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 1.091270] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8ca94f0e4af0), AE_NOT_FOUND (20160422/psparse-542)
[ 1.091479] ata3.00: configured for UDMA/133
[ 1.091587] ata5.00: NCQ Send/Recv Log not supported
[ 1.091588] ata5.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB0Q, max UDMA/133
[ 1.091589] ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.091725] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 1.091727] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8ca94f0e4af0), AE_NOT_FOUND (20160422/psparse-542)
[ 1.092038] ata5.00: NCQ Send/Recv Log not supported
[ 1.092039] ata5.00: configured for UDMA/133
[ 1.092884] ata1.00: configured for UDMA/100
[ 1.094587] scsi 0:0:0:0: CD-ROM ATAPI iHAS124 Y BL0V PQ: 0 ANSI: 5
[ 1.116691] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.116692] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.116792] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.116835] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.116941] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72101 A3MA PQ: 0 ANSI: 5
[ 1.143537] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.143538] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.143686] hub 1-1:1.0: USB hub found
[ 1.143784] hub 1-1:1.0: 6 ports detected
[ 1.155288] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.155307] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.155326] sd 2:0:0:0: [sda] Write Protect is off
[ 1.155328] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.155344] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.155452] scsi 4:0:0:0: Direct-Access ATA Samsung SSD 840 BB0Q PQ: 0 ANSI: 5
[ 1.163538] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.163539] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.163692] hub 2-1:1.0: USB hub found
[ 1.163788] hub 2-1:1.0: 8 ports detected
[ 1.167393] fbcon: inteldrmfb (fb0) is primary device
[ 1.179384] sda: sda1 sda2
[ 1.179812] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.196024] Console: switching to colour frame buffer device 240x67
[ 1.199338] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1.199362] sd 4:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 1.199463] sd 4:0:0:0: [sdb] Write Protect is off
[ 1.199464] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.199484] scsi 5:0:0:0: Direct-Access ATA WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[ 1.199501] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.201480] sdb: sdb1 sdb2 sdb3
[ 1.201647] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 1.215171] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.231302] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 1.231315] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.231316] sd 5:0:0:0: [sdc] 4096-byte physical blocks
[ 1.231415] sd 5:0:0:0: [sdc] Write Protect is off
[ 1.231416] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.231463] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.286831] sdc: sdc1 sdc2 < sdc5 >
[ 1.287203] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 1.431237] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.542439] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52f
[ 1.542440] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.542440] usb 1-1.1: Product: USB Receiver
[ 1.542441] usb 1-1.1: Manufacturer: Logitech
[ 1.545055] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.548501] usbcore: registered new interface driver usbhid
[ 1.548502] usbhid: USB HID core driver
[ 1.549348] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C52F.0001/input/input4
[ 1.549407] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input0
[ 1.549999] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52F.0002/input/input5
[ 1.607425] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input1
[ 1.623252] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[ 1.635253] tsc: Refined TSC clocksource calibration: 3497.972 MHz
[ 1.635256] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x326bd592a83, max_idle_ns: 440795311901 ns
[ 2.092296] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.350388] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0158
[ 2.350389] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.350390] usb 1-1.2: Product: USB2.0-CRW
[ 2.350391] usb 1-1.2: Manufacturer: Generic
[ 2.350391] usb 1-1.2: SerialNumber: 20060413092100000
[ 2.356195] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 2.356304] systemd[1]: Detected architecture x86-64.
[ 2.356411] systemd[1]: Set hostname to <Asgard>.
[ 2.460375] systemd[1]: Created slice System Slice.
[ 2.460404] systemd[1]: Reached target Remote File Systems (Pre).
[ 2.460430] systemd[1]: Listening on udev Control Socket.
[ 2.460469] systemd[1]: Created slice User and Session Slice.
[ 2.460494] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 2.460535] systemd[1]: Listening on Journal Audit Socket.
[ 2.460559] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 2.534267] lp: driver loaded but no devices found
[ 2.538221] ppdev: user-space parallel port driver
[ 2.659370] clocksource: Switched to clocksource tsc
[ 2.713763] EXT4-fs (sdb2): re-mounted. Opts: discard,errors=remount-ro
[ 2.793785] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.818412] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 2.818413] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.818414] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.818414] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.818415] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 2.833894] usbcore: registered new interface driver usb-storage
[ 2.835921] usbcore: registered new interface driver uas
[ 2.837527] ums-realtek 1-1.2:1.0: USB Mass Storage device detected
[ 2.839791] AVX2 version of gcm_enc/dec engaged.
[ 2.839792] AES CTR mode by8 optimization enabled
[ 2.843259] random: crng init done
[ 2.846800] scsi host6: usb-storage 1-1.2:1.0
[ 2.846850] usbcore: registered new interface driver ums-realtek
[ 2.853310] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.860103] intel_rapl: Found RAPL domain package
[ 2.860106] intel_rapl: Found RAPL domain core
[ 2.860107] intel_rapl: Found RAPL domain uncore
[ 2.860108] intel_rapl: Found RAPL domain dram
[ 2.869789] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 2.869791] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.869792] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.869793] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 2.869794] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
[ 2.869795] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 2.869796] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 2.869798] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 2.869799] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 2.879237] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input6
[ 2.879283] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
[ 2.882309] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 2.882346] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 2.882378] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 2.882412] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 2.882448] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 2.882495] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 2.882541] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 2.882598] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 2.889519] asus_wmi: ASUS WMI generic driver loaded
[ 2.891011] asus_wmi: Initialization: 0x0
[ 2.891036] asus_wmi: BIOS WMI version: 0.9
[ 2.891072] asus_wmi: SFUN value: 0x0
[ 2.891519] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input16
[ 2.891600] asus_wmi: Number of fans: 1
[ 2.951794] ath: EEPROM regdomain: 0x809c
[ 2.951795] ath: EEPROM indicates we should expect a country code
[ 2.951796] ath: doing EEPROM country->regdmn map search
[ 2.951796] ath: country maps to regdmn code: 0x52
[ 2.951796] ath: Country alpha2 being used: CN
[ 2.951797] ath: Regpair used: 0x52
[ 2.954681] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 2.954875] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffa8d381c40000, irq=18
[ 2.992862] ath9k 0000:06:00.0 wlp6s0: renamed from wlan0
[ 3.520038] Adding 760828k swap on /dev/sdc5. Priority:-1 extents:1 across:760828k FS
[ 3.646784] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.662592] systemd-journald[364]: Received request to flush runtime journal from PID 1
[ 3.715239] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.809772] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.856232] audit: type=1400 audit(1495363287.648:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=929 comm="apparmor_parser"
[ 3.856829] audit: type=1400 audit(1495363287.648:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=926 comm="apparmor_parser"
[ 3.856834] audit: type=1400 audit(1495363287.648:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=926 comm="apparmor_parser"
[ 3.857604] audit: type=1400 audit(1495363287.648:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=922 comm="apparmor_parser"
[ 3.857609] audit: type=1400 audit(1495363287.648:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=922 comm="apparmor_parser"
[ 3.857613] audit: type=1400 audit(1495363287.648:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=922 comm="apparmor_parser"
[ 3.857616] audit: type=1400 audit(1495363287.648:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=922 comm="apparmor_parser"
[ 3.857682] audit: type=1400 audit(1495363287.648:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=931 comm="apparmor_parser"
[ 3.857850] audit: type=1400 audit(1495363287.648:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=921 comm="apparmor_parser"
[ 3.888021] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 3.888715] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 3.979429] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 4.125276] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 4.388238] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[ 4.389767] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 4.442006] r8169 0000:03:00.0 enp3s0: link down
[ 4.442023] r8169 0000:03:00.0 enp3s0: link down
[ 4.442072] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 6.010459] r8169 0000:03:00.0 enp3s0: link up
[ 6.010470] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 11.041282] usbcore: deregistering interface driver ums-realtek
[ 11.777364] ums-realtek 1-1.2:1.0: USB Mass Storage device detected
[ 11.936826] scsi host6: usb-storage 1-1.2:1.0
[ 11.936888] usbcore: registered new interface driver ums-realtek
[ 12.969494] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 12.969812] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 12.971428] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 313.135352] audit_printk_skb: 39 callbacks suppressed
[ 313.135353] audit: type=1400 audit(1495363595.975:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=6756 comm="apparmor_parser"
[ 313.149531] audit: type=1400 audit(1495363595.991:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=6756 comm="apparmor_parser"
[ 1577.951987] usb 1-1.2: USB disconnect, device number 4
[ 1578.255242] usb 1-1.2: new high-speed USB device number 5 using ehci-pci
[ 1583.555672] usb 1-1.2: device descriptor read/64, error -110
[ 1599.173021] usb 1-1.2: device descriptor read/64, error -110
[ 1599.361020] usb 1-1.2: new high-speed USB device number 6 using ehci-pci
[ 1604.549465] usb 1-1.2: device descriptor read/64, error -110
[ 1620.166784] usb 1-1.2: device descriptor read/64, error -110
[ 1620.354804] usb 1-1.2: new high-speed USB device number 7 using ehci-pci
[ 1631.047712] usb 1-1.2: device not accepting address 7, error -110
[ 1631.127714] usb 1-1.2: new high-speed USB device number 8 using ehci-pci
[ 1641.800650] usb 1-1.2: device not accepting address 8, error -110
[ 1641.800780] usb 1-1-port2: unable to enumerate USB deviceFin du dmesg après un reboot suite à l'installation de fusefat, et insertion d'une carte dans le lecteur :
[ 3.769454] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 3.825551] r8169 0000:03:00.0 enp3s0: link down
[ 3.825568] r8169 0000:03:00.0 enp3s0: link down
[ 3.825618] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 3.828979] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[ 5.407002] r8169 0000:03:00.0 enp3s0: link up
[ 5.407009] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 6.963502] usb 1-1.2: device descriptor read/64, error -110
[ 22.577941] usb 1-1.2: device descriptor read/64, error -110
[ 22.765959] usb 1-1.2: new high-speed USB device number 5 using ehci-pci
[ 27.953678] usb 1-1.2: device descriptor read/64, error -110
[ 43.570123] usb 1-1.2: device descriptor read/64, error -110
[ 43.758140] usb 1-1.2: new high-speed USB device number 6 using ehci-pciDernière modification par Coeur Noir (Le 21/05/2017, à 13:27)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#2 Le 22/05/2017, à 11:29
- Coeur Noir
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
Personne avec un ou des APN Nikon et un ou des lecteurs de cartes intégrés à son pc ?
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#3 Le 22/05/2017, à 11:56
- moko138
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
Si tu n'as pas changé de pc, ou si tu as mis sur ton nouveau pc tes réglages de l'ancien S.E., je pense que l'explication pourrait être là : ./viewtopic.php?pid=21456636#p21456636. 
- -
Sinon, donne
lsusbls -la /etc/modprobe.d/lsmod- -
Si ta carte est saine - mais j'ai des doutes à cause de
usb "device descriptor read/64, error -110"
et, à tout le moins, un reformatage depuis l'APN serait une utile précaution -
alors, les contournements que j'utilise sont tantôt, comme toi :
je branche l'APN via cable USB
tantôt d'utiliser un lecteur de cartes externe.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#4 Le 22/05/2017, à 12:37
- Coeur Noir
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
Salut Moko ;-) quelle mémoire !
Aucune carte SD-HC provenant d'appareils Nikon n'apparaît… Or certains de ces APN nécessitent une batterie chargée pour lire le contenu de la carte via connexion USB, or après une longue journée de shoots… d'où le besoin d'insérer direct dans le pc la carte SD-HC.
Ce qui m'étonne c'est qu'Ubuntu ne voit pas ces cartes ( alors qu'il y a bien des photos dedans… ) : que fait le formatage Nikon de si particulier ?
Les retours de commande, sous ma 16.04 :
coeurnoir@Asgard:~$ lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 001 Device 003: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
coeurnoir@Asgard:~$ ls -la /etc/modprobe.d/
total 72
drwxr-xr-x 2 root root 4096 mai 17 12:09 .
drwxr-xr-x 149 root root 12288 mai 21 12:49 ..
-rw-r--r-- 1 root root 2507 juil. 31 2015 alsa-base.conf
-rw-r--r-- 1 root root 325 mars 13 2016 blacklist-ath_pci.conf
-rw-r--r-- 1 root root 1603 mars 13 2016 blacklist.conf
-rw-r--r-- 1 root root 210 mars 13 2016 blacklist-firewire.conf
-rw-r--r-- 1 root root 697 mars 13 2016 blacklist-framebuffer.conf
-rw-r--r-- 1 root root 156 juil. 31 2015 blacklist-modem.conf
lrwxrwxrwx 1 root root 41 juil. 26 2016 blacklist-oss.conf -> /lib/linux-sound-base/noOSS.modprobe.conf
-rw-r--r-- 1 root root 583 mars 13 2016 blacklist-rare-network.conf
-rw-r--r-- 1 root root 1077 mars 13 2016 blacklist-watchdog.conf
-rw-r--r-- 1 root root 390 avril 12 2016 fbdev-blacklist.conf
-rw-r--r-- 1 root root 154 nov. 10 2015 intel-microcode-blacklist.conf
-rw-r--r-- 1 root root 347 mars 13 2016 iwlwifi.conf
-rw-r--r-- 1 root root 104 mars 13 2016 mlx4.conf
-rw-r--r-- 1 root root 27 mars 16 2016 qemu-system-x86.conf
-rw-r--r-- 1 root root 30 mars 3 2016 vmwgfx-fbdev.conf
coeurnoir@Asgard:~$ lsmod
Module Size Used by
ums_realtek 20480 0
binfmt_misc 20480 1
arc4 16384 2
snd_hda_codec_hdmi 45056 1
eeepc_wmi 16384 0
asus_wmi 28672 1 eeepc_wmi
sparse_keymap 16384 1 asus_wmi
ath9k 147456 0
ath9k_common 36864 1 ath9k
intel_rapl 20480 0
x86_pkg_temp_thermal 16384 0
intel_powerclamp 16384 0
snd_hda_codec_realtek 86016 1
ath9k_hw 475136 2 ath9k,ath9k_common
coretemp 16384 0
snd_hda_codec_generic 73728 1 snd_hda_codec_realtek
crct10dif_pclmul 16384 0
ath 32768 3 ath9k_hw,ath9k,ath9k_common
crc32_pclmul 16384 0
ghash_clmulni_intel 16384 0
snd_hda_intel 36864 5
aesni_intel 167936 0
mac80211 761856 1 ath9k
snd_hda_codec 135168 4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
aes_x86_64 20480 1 aesni_intel
snd_hda_core 86016 5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
lrw 16384 1 aesni_intel
snd_hwdep 16384 1 snd_hda_codec
glue_helper 16384 1 aesni_intel
snd_pcm 110592 4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
ablk_helper 16384 1 aesni_intel
uas 24576 0
joydev 20480 0
cryptd 24576 3 ablk_helper,ghash_clmulni_intel,aesni_intel
usb_storage 73728 2 uas,ums_realtek
snd_seq_midi 16384 0
intel_cstate 16384 0
snd_seq_midi_event 16384 1 snd_seq_midi
cfg80211 581632 4 mac80211,ath9k,ath,ath9k_common
snd_rawmidi 32768 1 snd_seq_midi
input_leds 16384 0
intel_rapl_perf 16384 0
serio_raw 16384 0
snd_seq 69632 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 32768 2 snd_seq,snd_pcm
lpc_ich 24576 0
snd 86016 21 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
shpchp 36864 0
mei_me 40960 0
soundcore 16384 1 snd
mei 102400 1 mei_me
kvm_intel 192512 0
kvm 598016 1 kvm_intel
mac_hid 16384 0
irqbypass 16384 1 kvm
tpm_infineon 20480 0
parport_pc 32768 0
ppdev 20480 0
lp 20480 0
parport 49152 3 lp,parport_pc,ppdev
autofs4 40960 2
hid_generic 16384 0
usbhid 53248 0
hid 122880 3 hid_generic,usbhid
i915 1314816 112
mxm_wmi 16384 0
i2c_algo_bit 16384 1 i915
drm_kms_helper 167936 1 i915
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
fb_sys_fops 16384 1 drm_kms_helper
drm 368640 5 i915,drm_kms_helper
r8169 81920 0
ahci 36864 5
libahci 32768 1 ahci
mii 16384 1 r8169
fjes 28672 0
wmi 16384 2 asus_wmi,mxm_wmi
video 40960 2 asus_wmi,i915
coeurnoir@Asgard:~$ Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#5 Le 22/05/2017, à 12:45
- navtex
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
Bonjour
une idée un peu : avec je ne sais plus quels appareils , il faut démonter ou éjecter le "drive usb" où il n'y a rien et alors apparaissent les contenus.
Xubuntu sur CLEVO PA7 i5 32ram Jammy Jellyfish
ABientot sur le Libre
Hors ligne
#6 Le 22/05/2017, à 13:16
- moko138
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
quelle mémoire !
C'est que tu m'avais tiré une fameuse épine du pied, en me mettant sur la voie pour empêcher mes logs et dmesg d'enfler à chaque minute !
- -
Donne
cat /etc/modprobe.d/blacklist.confcat /etc/rc.local | grep realtek- -
Ce qui m'étonne c'est qu'Ubuntu ne voit pas ces cartes ( alors qu'il y a bien des photos dedans… )
Mais tu as modifié les options du module ums_realtek :
lsmod Module Size Used by ums_realtek 20480 0
- -
Sinon, tu peux tenter, après débranchement de la carte :
sudo rmmod ums_realtek
sudo modprobe ums_realteket réinsertion de la carte.
Ou encore, tu peux aussi tenter, après débranchement de la carte :
sudo modprobe -r ums_realtek
sudo modprobe -a ums_realteket réinsérer la carte.
- -
que fait le formatage Nikon de si particulier ?
Rien de particulier : il efface tout et recrée un système de fichiers sain (si le support matériel le permet).
- -
certains de ces APN nécessitent une batterie chargée pour lire le contenu de la carte via connexion USB, or après une longue journée de shoots… d'où le besoin d'insérer direct dans le pc la carte SD-HC.
Alors, comme moi, offre-toi un lecteur externe (6 à 10 € maxi) : c'est vraiment le moins prise de tête. 
Dernière modification par moko138 (Le 22/05/2017, à 13:17)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#7 Le 22/05/2017, à 14:40
- Coeur Noir
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
coeurnoir@Asgard:~$ cat /etc/modprobe.d/blacklist.conf
# This file lists those modules which we don't want to be loaded by
# alias expansion, usually so some other driver will be loaded for the
# device instead.
# evbug is a debug tool that should be loaded explicitly
blacklist evbug
# these drivers are very simple, the HID drivers are usually preferred
blacklist usbmouse
blacklist usbkbd
# replaced by e100
blacklist eepro100
# replaced by tulip
blacklist de4x5
# causes no end of confusion by creating unexpected network interfaces
blacklist eth1394
# snd_intel8x0m can interfere with snd_intel8x0, doesn't seem to support much
# hardware on its own (Ubuntu bug #2011, #6810)
blacklist snd_intel8x0m
# Conflicts with dvb driver (which is better for handling this device)
blacklist snd_aw2
# causes failure to suspend on HP compaq nc6000 (Ubuntu: #10306)
blacklist i2c_i801
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
# most apps now use garmin usb driver directly (Ubuntu: #114565)
blacklist garmin_gps
# replaced by asus-laptop (Ubuntu: #184721)
blacklist asus_acpi
# low-quality, just noise when being used for sound playback, causes
# hangs at desktop session start (Ubuntu: #246969)
blacklist snd_pcsp
# ugly and loud noise, getting on everyone's nerves; this should be done by a
# nice pulseaudio bing (Ubuntu: #77010)
blacklist pcspkr
# EDAC driver for amd76x clashes with the agp driver preventing the aperture
# from being initialised (Ubuntu: #297750). Blacklist so that the driver
# continues to build and is installable for the few cases where its
# really needed.
blacklist amd76x_edac
coeurnoir@Asgard:~$ cat /etc/rc.local | grep realtek
# messages dans dmesg autour de multi-card-reader realtek
rmmod ums_realtek
modprobe ums_realtek ss_en=0J'enlève comment déjà le ss_en=0 à tout hasard ?
Mais si je l'enlève ça fera revenir les messages « …write through » je suppose ?
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#8 Le 22/05/2017, à 15:04
- moko138
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
J'enlève comment déjà le ss_en=0 à tout hasard ?
Mais si je l'enlève ça fera revenir les messages « …write through » je suppose ?
1) Ben tu commentes les deux lignes !
Ensuite tu peux passer à
Sinon, tu peux tenter, après débranchement de la carte :
sudo rmmod ums_realtek sudo modprobe ums_realteket réinsertion de la carte.
Ou encore, tu peux aussi tenter, après débranchement de la carte :
sudo modprobe -r ums_realtek sudo modprobe -a ums_realteket réinsérer la carte.
- -
2) Oui, mais si le transfert de tes photos ne dure pas trois plombes, le dmesg va grossir... raisonnablement, ce n'est pas grave.
Et quand le transfert est fini,
- tu décommentes les 2 lignes
- puis tu fais
sudo rmmod ums_realteket, si vraiment tu as besoin (*) du module quand tu n'utilises pas la carte :
sudo modprobe ums_realtek ss_en=0- -
(*) As-tu vérifié si avec les noyaux actuels, tu avais encore besoin de l'option
ss_en=0
?
P.S. : J'ai oublié de te demander ce qu'il y avait dans /etc/modules !
Dernière modification par moko138 (Le 22/05/2017, à 15:06)
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#9 Le 22/05/2017, à 21:47
- FalCT60
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
Coeur Noir a écrit :
Personne avec un ou des APN Nikon et un ou des lecteurs de cartes intégrés à son pc ?
J'utilise un D700 avec des CF que je lis sans problème au moyen d'un lecteur multicartes connecté en usb.
A priori, le formatage Nikon n'a rien de particulier : du classique fat.
D'autre part, mon PC est en mode BIOS et non EFI, ça change peut-être quelque chose.
Je vais demander parmi mon entourage si quelqu'un possède un 3200 et peut me passer une carte. Sans garantie ni promesse aucune.
Crdlt,
J.-Luc
Hors ligne
#10 Le 23/05/2017, à 13:37
- Coeur Noir
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
Moko, rien par là :
coeurnoir@Asgard:~$ cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
coeurnoir@Asgard:~$et j'ai commenté dans /etc/rc.local les lignes concernant ums_realtek.
FalCT60 ouep si tu as l'occase de tester ce serait cool. Il semble que je n'ai ce problème qu'avec des cartes SDHC et le hasard fait que les APN que j'ai sous la main sont des Nikon.
Tu parles du bios et ça m'intrigue : le mien est EFI ( carte mère asus z87 ) et le réglage des ports usb me questionne, ehci, xhci, quid, est-ce que ça a une influence sur les cartes ?
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#11 Le 23/05/2017, à 13:47
- Coeur Noir
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
Mmmm du nouveau :
et fin du dmesg :
[ 200.227653] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 258.624872] sd 6:0:0:0: [sdd] 62916608 512-byte logical blocks: (32.2 GB/30.0 GiB)
[ 258.626297] sd 6:0:0:0: [sdd] Write Protect is on
[ 258.626302] sd 6:0:0:0: [sdd] Mode Sense: 03 00 80 00
[ 258.635034] sdd: sdd1
[ 259.390377] FAT-fs (sdd1): error, invalid access to FAT (entry 0x0af97cce)
[ 318.599860] FAT-fs (sdd1): error, invalid access to FAT (entry 0x0af97cce)
[ 330.607720] systemd[1]: apt-daily.timer: Adding 2h 55min 6.764547s random time.
[ 330.750776] systemd[1]: apt-daily.timer: Adding 6h 15min 27.848545s random time.
[ 331.134561] systemd[1]: apt-daily.timer: Adding 7h 10min 46.258785s random time.
[ 331.534441] systemd[1]: apt-daily.timer: Adding 5h 35min 1.316088s random time.
[ 331.595744] systemd[1]: apt-daily.timer: Adding 5h 24min 33.915336s random time.
[ 394.306204] FAT-fs (sdd1): error, invalid access to FAT (entry 0x0af97cce)
[ 398.367939] FAT-fs (sdd1): error, invalid access to FAT (entry 0x0af97cce)Qu'ai-je donc fait depuis ? Une nuit complètement hors tension + un coup de lampe torche dans le lecteur de cartes et j'ai constaté du côté des broches pour les CF que certaines se touchaient :-/ les ai donc remis d'aplomb.
Bon à priori depuis que j'ai inséré la carte, nautilus ne veut plus se lancer…
coeurnoir@Asgard:~$ nautilus
(nautilus:4377): GLib-GIO-CRITICAL **: g_dbus_interface_skeleton_unexport: assertion 'interface_->priv->connections != NULL' failed
(nautilus:4377): GLib-GIO-CRITICAL **: g_dbus_interface_skeleton_unexport: assertion 'interface_->priv->connections != NULL' failed
Impossible d'enregistrer l'application: Le délai d'attente est dépassé
(nautilus:4377): Gtk-CRITICAL **: gtk_icon_theme_get_for_screen: assertion 'GDK_IS_SCREEN (screen)' failed
(nautilus:4377): GLib-GObject-WARNING **: invalid (NULL) pointer instance
(nautilus:4377): GLib-GObject-CRITICAL **: g_signal_connect_object: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed
coeurnoir@Asgard:~$Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#12 Le 23/05/2017, à 14:36
- remp
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
Bonjour,
Juste en témoignage
j'ai un Nikon D3100 et effectivement je n'arrive pas à monter la micro cartes sdhc de 8GO avec adaptateur sur mon petit portable, par contre elle monte bien sur un pc en windows 10 et une tablette android .
l'utilitaire "disque" fait apparaitre un master flash disk mais sans possibilité du montage .
Ce qui est bizarre c'est que je pouvais monter cette carte quand j'étais en 12.04 ...
hp pavilion
Hors ligne
#13 Le 23/05/2017, à 14:40
- moko138
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
Pendant que ta carte veut bien monter en lecture seule,
j'espère que tu en profites pour
- sauvegarder le contenu de /DCIM/ (si pas déjà fait) ;
- enregistrer les retours de
sudo fdisk -let de
sudo parted -l- -
Ensuite
- démonte ta carte,
(j'ignore si le vieux bug concernant les lecteurs de cartes existe toujours quand on emploie "éjecter")
- débranche-la,
- vérifie que ni /var/log ni ~/.xsession-errors ne sont devenus énormes (puisque c'était le bug initial concernant les lecteurs Realtek 0bda:0129 RTS5129/RTS5139 et 0bda:0158)
et le cas échéant, rétablis tes options antérieures concernant le module de ton lecteur.
- Fais reformater ta carte (si elle le supporte encore) par ton APN. Cf. Maintenance des supports.... Et n'oublie pas que l'APN crée des fichiers et répertoires propres à son fabricant, sinon propres à lui (l'APN).
- -
j'ai constaté du côté des broches pour les CF que certaines se touchaient
Cf. la dernière ligne du #6.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#14 Le 23/05/2017, à 14:46
- Coeur Noir
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
Alors… après quelques essais avec mes 3 cartes SDHC provenant toutes d'APN Nikon :
- il y a la première 32 Gb qui donne les erreurs du post #11 → serait-elle kaputt ? Ce qui ne m'étonnerait qu'à moitié…
- les 2 autres ( 4Gb Nikon et 16 Gb Sandisk ) montent et s'affichent correctement MAIS ne sont accessibles qu'en lecture → elles ne sont pas « lockées » physiquement, s'agit-il d'une sécurité : seul l'APN peut y écrire et donc supprimer des contenus ?
Le formatage semble effectivement un Fat32 basique.
Le souci avec Nautilus n'est pas semble-t-il lié aux cartes puisque là j'ai inséré/éjecté des cartes à plusieurs reprises sans alerte.
Pas de message redondant dans dmesg.
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#15 Le 23/05/2017, à 15:56
- moko138
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
Pas de message redondant dans dmesg.
Bien !
Et dans ~/.xsession-errors ?
- -
Coeur Noir a écrit :
- les 2 autres ( 4Gb Nikon et 16 Gb Sandisk ) montent et s'affichent correctement MAIS ne sont accessibles qu'en lecture → elles ne sont pas « lockées » physiquement, s'agit-il d'une sécurité : seul l'APN peut y écrire et donc supprimer des contenus ?
Ces cartes étaient-elles bien dans le lecteur ?
Car si lues dans l'APN, la question du protocole doit être précisée : Mass Storage ou bien MTP/PTP ?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#16 Le 23/05/2017, à 16:13
- moko138
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
À noter chez moi, pour une Lexar SDHC 8Go class10 400x, cette
bizarre divergence entre gparted 0.18.0-1 et testdisk 6.14 :
selon gparted :
cylindres 973
têtes 255
secteurs 63 par piste
selon testdisk :
cylindres 1021
têtes 247
secteurs 62 par piste
Warning: number of heads/cylinder mismatches 255 (FAT) != 247 (HD)
Warning: number of sectors per track mismatches 63 (FAT) != 62 (HD)
1 P FAT32 0 132 9 1021 146 26 15636480 [NIKON
Bad relative sector. ## j'ignore ce que c'est.Toutefois la carte, restée dans l'APN réglé sur "mass storage", est opérationnelle avant et après passage par testdisk.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#17 Le 23/05/2017, à 17:30
- MicP
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
Bonsoir
Ces divergences proviennent du fait que ces fabricants font leur propre format sans respecter certains standards.
On retrouve ce même problème dans les disques intégrés dans certains appareils vidéo, et autres appareils audio GPS, etc.
Pas évident à retrouver, mais voici un de mes souvenir au sujet d'un NIKON : https://forum.ubuntu-fr.org/viewtopic.p … #p21715072
J'ai eu aussi à faire avec une carte SD d'un téléphone NOKIA qui posait les mêmes problèmes.
Formats propriétaires => fermés => pas d'accès aux informations sur l'organisation des données => galère pour les utilisateurs.
Parfois, ces appareils ne respectent pas les formats standards pour des raisons de réelle éfficacité concernant le fonctionnement de leur appareil,
mais pas toujours…
Dernière modification par MicP (Le 23/05/2017, à 17:45)
Hors ligne
#18 Le 23/05/2017, à 23:02
- Coeur Noir
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
moko138 a écrit :
Coeur Noir a écrit :- les 2 autres ( 4Gb Nikon et 16 Gb Sandisk ) montent et s'affichent correctement MAIS ne sont accessibles qu'en lecture → elles ne sont pas « lockées » physiquement, s'agit-il d'une sécurité : seul l'APN peut y écrire et donc supprimer des contenus ?
Ces cartes étaient-elles bien dans le lecteur ?
Car si lues dans l'APN, la question du protocole doit être précisée : Mass Storage ou bien MTP/PTP ?
À vue de pif je dirais mtp/ptp puisque quand je connecte l'APN via cable usb le système me demande ce que je veux faire avec ce device qui contient des photos. Si c'était un mass storage il me l'ouvrirait d'office dans l'explorateur de fichiers, j'ai bon ?
Les cartes étaient bien dans le lecteur, dans ce cas elles montent en lecture seule - ce qui ne m'empêche pas de récupérer les photos mais ne permet pas de « vider » la carte.
Or il se pourrait que j'ai besoin d'écrire sur une carte SD pour mettre à jour le firmware d'un des APN - sachant que je n'ai pas de windows sous la main à la maison…
Les cartes SDHC en question ont été formatées via l'APN - comme recommandé dans les notices des appareils.
À noter qu'en cas de connexion par câble usb de l'APN, je ne peux pas écrire non plus sur les cartes, mais je peux quand même supprimer les photos - suppression directe sans passage par la corbeille avec demande de confirmation.
Sinon xsession-errors dit :
openConnection: connect: Aucun fichier ou dossier de ce type
cannot connect to brltty at :0Par contre j'ai p'têt crié victoire trop vite à propos des messages redondants dans dmesg ( au complet ci après ) soit une floppée de « usb 1-1.2: reset high-speed USB device number 8 using ehci-pci » :
[ 0.000000] microcode: microcode updated early to revision 0x1e, date = 2015-08-13
[ 0.000000] Linux version 4.8.0-52-generic (buildd@lgw01-59) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #55~16.04.1-Ubuntu SMP Fri Apr 28 14:36:29 UTC 2017 (Ubuntu 4.8.0-52.55~16.04.1-generic 4.8.17)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-52-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c5398fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c5399000-0x00000000c539ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000c53a0000-0x00000000c57f3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c57f4000-0x00000000c5c54fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c5c55000-0x00000000d8644fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d8645000-0x00000000d884dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d884e000-0x00000000d8866fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d8867000-0x00000000d8da7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d8da8000-0x00000000d9ffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9fff000-0x00000000d9ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUS All Series/Z87-C, BIOS 2103 08/15/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00DC000000 mask 7FFC000000 uncachable
[ 0.000000] 4 base 00DB000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 041FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] total RAM covered: 16302M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 9 lose cover RAM: 0G
[ 0.000000] e820: update [mem 0xdb000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xda000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd880-0x000fd88f] mapped at [ffff8b52800fd880]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff8b5280097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x46e3b000, 0x46e3bfff] PGTABLE
[ 0.000000] BRK [0x46e3c000, 0x46e3cfff] PGTABLE
[ 0.000000] BRK [0x46e3d000, 0x46e3dfff] PGTABLE
[ 0.000000] BRK [0x46e3e000, 0x46e3efff] PGTABLE
[ 0.000000] BRK [0x46e3f000, 0x46e3ffff] PGTABLE
[ 0.000000] BRK [0x46e40000, 0x46e40fff] PGTABLE
[ 0.000000] BRK [0x46e41000, 0x46e41fff] PGTABLE
[ 0.000000] BRK [0x46e42000, 0x46e42fff] PGTABLE
[ 0.000000] BRK [0x46e43000, 0x46e43fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3325e000-0x35926fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000D8853080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000D8861838 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000D8853198 00E699 (v02 ALASKA A M I 00000031 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000D8DA6080 000040
[ 0.000000] ACPI: APIC 0x00000000D8861948 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000D88619E0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: LPIT 0x00000000D8861A28 00005C (v01 ALASKA A M I 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D8861A88 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000D8861FC8 000AD8 (v01 PmRef CpuPm 00003000 INTL 20091112)
[ 0.000000] ACPI: MCFG 0x00000000D8862AA0 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000D8862AE0 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D8862B18 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000D8862E88 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: BGRT 0x00000000D88663C8 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41fdf9000-0x41fdfdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000c5398fff]
[ 0.000000] node 0: [mem 0x00000000c53a0000-0x00000000c57f3fff]
[ 0.000000] node 0: [mem 0x00000000c5c55000-0x00000000d8644fff]
[ 0.000000] node 0: [mem 0x00000000d9fff000-0x00000000d9ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041fdfffff]
[ 0.000000] On node 0 totalpages: 4161402
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13768 pages used for memmap
[ 0.000000] DMA32 zone: 881118 pages, LIFO batch:31
[ 0.000000] Normal zone: 51192 pages used for memmap
[ 0.000000] Normal zone: 3276288 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000db200000-0x00000000df1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc5399000-0xc539ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc57f4000-0xc5c54fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8645000-0xd884dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd884e000-0xd8866fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8867000-0xd8da7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd8da8000-0xd9ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda000000-0xdaffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff8b569fa00000 s107864 r8192 d31400 u262144
[ 0.000000] pcpu-alloc: s107864 r8192 d31400 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4096357
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-52-generic root=UUID=90a0f248-65ad-4247-b7ba-fb4e9f632905 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16257464K/16645608K available (8829K kernel code, 1441K rwdata, 3836K rodata, 1548K init, 1296K bss, 388144K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3497.879 MHz processor
[ 0.000016] Calibrating delay loop (skipped), value calculated using timer frequency.. 6995.75 BogoMIPS (lpj=13991516)
[ 0.000017] pid_max: default: 32768 minimum: 301
[ 0.000024] ACPI: Core revision 20160422
[ 0.007759] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.007778] Security Framework initialized
[ 0.007779] Yama: becoming mindful.
[ 0.007790] AppArmor: AppArmor initialized
[ 0.008292] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.010365] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011302] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.011310] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.011523] CPU: Physical Processor ID: 0
[ 0.011524] CPU: Processor Core ID: 0
[ 0.011527] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.011527] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.011530] mce: CPU supports 9 MCE banks
[ 0.011537] CPU0: Thermal monitoring enabled (TM1)
[ 0.011547] process: using mwait in idle threads
[ 0.011549] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.011550] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.011859] Freeing SMP alternatives memory: 32K (ffffffffb3ced000 - ffffffffb3cf5000)
[ 0.013201] ftrace: allocating 33454 entries in 131 pages
[ 0.023454] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.023455] smpboot: Max logical packages: 2
[ 0.023823] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063507] TSC deadline timer enabled
[ 0.063509] smpboot: CPU0: Intel(R) Core(TM) i7-4770K CPU @ 3.50GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.063511] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.063536] ... version: 3
[ 0.063536] ... bit width: 48
[ 0.063537] ... generic registers: 4
[ 0.063537] ... value mask: 0000ffffffffffff
[ 0.063537] ... max period: 00007fffffffffff
[ 0.063538] ... fixed-purpose events: 3
[ 0.063538] ... event mask: 000000070000000f
[ 0.064121] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.064166] x86: Booting SMP configuration:
[ 0.064167] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.083973] x86: Booted up 1 node, 8 CPUs
[ 0.083974] smpboot: Total of 8 processors activated (55966.06 BogoMIPS)
[ 0.090965] devtmpfs: initialized
[ 0.091005] x86/mm: Memory block size: 128MB
[ 0.092897] evm: security.selinux
[ 0.092897] evm: security.SMACK64
[ 0.092898] evm: security.SMACK64EXEC
[ 0.092898] evm: security.SMACK64TRANSMUTE
[ 0.092898] evm: security.SMACK64MMAP
[ 0.092898] evm: security.ima
[ 0.092899] evm: security.capability
[ 0.092935] PM: Registering ACPI NVS region [mem 0xc5399000-0xc539ffff] (28672 bytes)
[ 0.092936] PM: Registering ACPI NVS region [mem 0xd8867000-0xd8da7fff] (5509120 bytes)
[ 0.093022] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.093051] pinctrl core: initialized pinctrl subsystem
[ 0.093124] RTC time: 11:33:47, date: 05/23/17
[ 0.093181] NET: Registered protocol family 16
[ 0.106619] cpuidle: using governor ladder
[ 0.122630] cpuidle: using governor menu
[ 0.122631] PCCT header not found.
[ 0.122650] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.122651] ACPI: bus type PCI registered
[ 0.122652] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.122689] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.122690] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.122696] PCI: Using configuration type 1 for base access
[ 0.122735] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.138703] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.138703] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.138842] ACPI: Added _OSI(Module Device)
[ 0.138842] ACPI: Added _OSI(Processor Device)
[ 0.138842] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.138843] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.138969] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.141743] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.142255] ACPI: Dynamic OEM Table Load:
[ 0.142258] ACPI: SSDT 0xFFFF8B568D3DDC00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
[ 0.142679] ACPI: Dynamic OEM Table Load:
[ 0.142682] ACPI: SSDT 0xFFFF8B568D3E2000 0005AA (v01 PmRef ApIst 00003000 INTL 20091112)
[ 0.143124] ACPI: Dynamic OEM Table Load:
[ 0.143126] ACPI: SSDT 0xFFFF8B568CC56000 000119 (v01 PmRef ApCst 00003000 INTL 20091112)
[ 0.144348] ACPI: Interpreter enabled
[ 0.144367] ACPI: (supports S0 S3 S4 S5)
[ 0.144367] ACPI: Using IOAPIC for interrupt routing
[ 0.144385] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.149843] ACPI: Power Resource [FN00] (off)
[ 0.149890] ACPI: Power Resource [FN01] (off)
[ 0.149934] ACPI: Power Resource [FN02] (off)
[ 0.149979] ACPI: Power Resource [FN03] (off)
[ 0.150024] ACPI: Power Resource [FN04] (off)
[ 0.150546] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.150549] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.150651] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.150730] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.150731] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.150958] PCI host bridge to bus 0000:00
[ 0.150959] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.150960] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.150961] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.150961] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.150962] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.150963] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.150963] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.150964] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.150964] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.150965] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.150966] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.150970] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.151027] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.151051] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.151101] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.151127] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[ 0.151133] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.151137] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.151140] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.151191] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.151196] pci 0000:00:03.0: reg 0x10: [mem 0xf7e04000-0xf7e07fff 64bit]
[ 0.151266] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.151280] pci 0000:00:16.0: reg 0x10: [mem 0xf7e0e000-0xf7e0e00f 64bit]
[ 0.151331] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.151382] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.151396] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e0c000-0xf7e0c3ff]
[ 0.151467] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.151500] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.151525] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.151537] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e00000-0xf7e03fff 64bit]
[ 0.151592] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.151618] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.151640] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.151691] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.151736] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.151760] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.151811] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.151854] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.151877] pci 0000:00:1c.3: [8086:244e] type 01 class 0x060401
[ 0.151928] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.151971] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.151995] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[ 0.152046] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.152088] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.152114] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.152127] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e0b000-0xf7e0b3ff]
[ 0.152197] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.152229] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.152253] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
[ 0.152380] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.152390] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.152395] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.152400] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.152406] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.152411] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.152416] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e0a000-0xf7e0a7ff]
[ 0.152443] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.152485] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.152496] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e09000-0xf7e090ff 64bit]
[ 0.152512] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.152585] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.152630] acpiphp: Slot [1] registered
[ 0.152632] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.152687] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.152704] pci 0000:03:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.152730] pci 0000:03:00.0: reg 0x18: [mem 0xf7d00000-0xf7d00fff 64bit]
[ 0.152745] pci 0000:03:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.152829] pci 0000:03:00.0: supports D1 D2
[ 0.152830] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.152864] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.162663] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.162666] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.162668] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.162671] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.162715] pci 0000:04:00.0: [1b21:1080] type 01 class 0x060401
[ 0.162805] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.162824] pci 0000:00:1c.3: PCI bridge to [bus 04-05] (subtractive decode)
[ 0.162831] pci 0000:00:1c.3: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.162831] pci 0000:00:1c.3: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.162832] pci 0000:00:1c.3: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.162833] pci 0000:00:1c.3: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.162833] pci 0000:00:1c.3: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.162834] pci 0000:00:1c.3: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.162834] pci 0000:00:1c.3: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.162835] pci 0000:00:1c.3: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.162836] pci 0000:00:1c.3: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.162836] pci 0000:00:1c.3: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.162923] pci 0000:04:00.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.162939] pci 0000:04:00.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.162940] pci 0000:04:00.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.162940] pci 0000:04:00.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.162941] pci 0000:04:00.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.162941] pci 0000:04:00.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.162942] pci 0000:04:00.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.162943] pci 0000:04:00.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.162943] pci 0000:04:00.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.162944] pci 0000:04:00.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.162944] pci 0000:04:00.0: bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[ 0.163005] pci 0000:06:00.0: [168c:002e] type 00 class 0x028000
[ 0.163027] pci 0000:06:00.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[ 0.163140] pci 0000:06:00.0: supports D1
[ 0.163141] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
[ 0.163172] pci 0000:06:00.0: System wakeup disabled by ACPI
[ 0.174668] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.174671] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.175185] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.175214] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.175242] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.175270] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.175298] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.175325] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.175352] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.175379] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.175579] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.175705] SCSI subsystem initialized
[ 0.175723] libata version 3.00 loaded.
[ 0.175741] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.175742] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.175744] vgaarb: loaded
[ 0.175744] vgaarb: bridge control possible 0000:00:02.0
[ 0.175754] ACPI: bus type USB registered
[ 0.175764] usbcore: registered new interface driver usbfs
[ 0.175769] usbcore: registered new interface driver hub
[ 0.175780] usbcore: registered new device driver usb
[ 0.175837] PCI: Using ACPI for IRQ routing
[ 0.176968] PCI: pci_cache_line_size set to 64 bytes
[ 0.177002] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.177002] e820: reserve RAM buffer [mem 0xc5399000-0xc7ffffff]
[ 0.177003] e820: reserve RAM buffer [mem 0xc57f4000-0xc7ffffff]
[ 0.177003] e820: reserve RAM buffer [mem 0xd8645000-0xdbffffff]
[ 0.177004] e820: reserve RAM buffer [mem 0xda000000-0xdbffffff]
[ 0.177005] e820: reserve RAM buffer [mem 0x41fe00000-0x41fffffff]
[ 0.177061] NetLabel: Initializing
[ 0.177062] NetLabel: domain hash size = 128
[ 0.177062] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.177070] NetLabel: unlabeled traffic allowed by default
[ 0.177119] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.177121] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.179138] clocksource: Switched to clocksource hpet
[ 0.183845] VFS: Disk quotas dquot_6.6.0
[ 0.183857] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.183920] AppArmor: AppArmor Filesystem Enabled
[ 0.183950] pnp: PnP ACPI init
[ 0.184009] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.184011] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.184121] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.184121] system 00:01: [io 0xffff] has been reserved
[ 0.184122] system 00:01: [io 0xffff] has been reserved
[ 0.184123] system 00:01: [io 0xffff] has been reserved
[ 0.184123] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.184124] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.184125] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.184126] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.184126] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.184127] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.184128] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.184143] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.184171] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.184173] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.184223] system 00:04: [io 0x0290-0x029f] has been reserved
[ 0.184224] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.184253] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.184254] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.184389] pnp 00:06: [dma 0 disabled]
[ 0.184416] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.184441] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.184701] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.184702] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.184703] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.184703] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.184704] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.184705] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.184706] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.184706] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.184707] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.184708] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.184709] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.184710] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.184711] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.184844] pnp: PnP ACPI: found 9 devices
[ 0.190265] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.190301] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.190305] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.190313] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.190314] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.190317] pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
[ 0.190319] pci 0000:00:1c.2: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.190323] pci 0000:04:00.0: PCI bridge to [bus 05]
[ 0.190338] pci 0000:00:1c.3: PCI bridge to [bus 04-05]
[ 0.190346] pci 0000:00:1c.6: PCI bridge to [bus 06]
[ 0.190349] pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.190354] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.190355] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.190356] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.190356] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.190357] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.190358] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.190358] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.190359] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.190359] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.190360] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.190361] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.190362] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[ 0.190362] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.190363] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.190364] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
[ 0.190365] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.190365] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.190366] pci_bus 0000:04: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.190367] pci_bus 0000:04: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.190367] pci_bus 0000:04: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.190368] pci_bus 0000:04: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.190369] pci_bus 0000:04: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.190369] pci_bus 0000:04: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.190370] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7 window]
[ 0.190371] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff window]
[ 0.190371] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.190372] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.190372] pci_bus 0000:05: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.190373] pci_bus 0000:05: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.190374] pci_bus 0000:05: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.190374] pci_bus 0000:05: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.190375] pci_bus 0000:05: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.190376] pci_bus 0000:05: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.190376] pci_bus 0000:06: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.190395] NET: Registered protocol family 2
[ 0.190507] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.190633] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.190739] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.190755] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.190788] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.190839] NET: Registered protocol family 1
[ 0.190848] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.239212] PCI: CLS 64 bytes, default 64
[ 0.239239] Unpacking initramfs...
[ 0.628271] Freeing initrd memory: 39716K (ffff8b52b325e000 - ffff8b52b5927000)
[ 0.628273] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.628275] software IO TLB [mem 0xd4645000-0xd8645000] (64MB) mapped at [ffff8b5354645000-ffff8b5358644fff]
[ 0.628512] Scanning for low memory corruption every 60 seconds
[ 0.628721] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.628745] audit: initializing netlink subsys (disabled)
[ 0.628754] audit: type=2000 audit(1495539227.620:1): initialized
[ 0.629010] Initialise system trusted keyrings
[ 0.629063] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.630012] zbud: loaded
[ 0.630264] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.630379] fuse init (API version 7.25)
[ 0.630457] Allocating IMA blacklist keyring.
[ 0.631064] Key type asymmetric registered
[ 0.631065] Asymmetric key parser 'x509' registered
[ 0.631084] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 0.631102] io scheduler noop registered
[ 0.631103] io scheduler deadline registered (default)
[ 0.631107] io scheduler cfq registered
[ 0.631470] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.631472] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.631491] intel_idle: MWAIT substates: 0x42120
[ 0.631492] intel_idle: v0.4.1 model 0x3C
[ 0.631666] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.631720] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.631722] ACPI: Power Button [PWRB]
[ 0.631743] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.631744] ACPI: Power Button [PWRF]
[ 0.632189] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.632190] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.632327] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.632327] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.632343] GHES: HEST is not enabled!
[ 0.632384] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.652823] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.653653] Linux agpgart interface v0.103
[ 0.654890] loop: module loaded
[ 0.654983] libphy: Fixed MDIO Bus: probed
[ 0.654984] tun: Universal TUN/TAP device driver, 1.6
[ 0.654984] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.655001] PPP generic driver version 2.4.2
[ 0.655023] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.655027] ehci-pci: EHCI PCI platform driver
[ 0.655088] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.655091] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.655100] ehci-pci 0000:00:1a.0: debug port 2
[ 0.659005] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.659020] ehci-pci 0000:00:1a.0: irq 20, io mem 0xf7e0c000
[ 0.671174] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.671194] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.671194] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.671195] usb usb1: Product: EHCI Host Controller
[ 0.671196] usb usb1: Manufacturer: Linux 4.8.0-52-generic ehci_hcd
[ 0.671196] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.671259] hub 1-0:1.0: USB hub found
[ 0.671261] hub 1-0:1.0: 2 ports detected
[ 0.671381] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.671384] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.671391] ehci-pci 0000:00:1d.0: debug port 2
[ 0.675270] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.675276] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e0b000
[ 0.691190] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.691205] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.691205] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.691206] usb usb2: Product: EHCI Host Controller
[ 0.691207] usb usb2: Manufacturer: Linux 4.8.0-52-generic ehci_hcd
[ 0.691207] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.691267] hub 2-0:1.0: USB hub found
[ 0.691269] hub 2-0:1.0: 2 ports detected
[ 0.691336] ehci-platform: EHCI generic platform driver
[ 0.691341] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.691342] ohci-pci: OHCI PCI platform driver
[ 0.691347] ohci-platform: OHCI generic platform driver
[ 0.691351] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.691380] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.691380] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.692001] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.692053] mousedev: PS/2 mouse device common for all mice
[ 0.692124] rtc_cmos 00:02: RTC can wake from S4
[ 0.692220] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.692239] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.692242] i2c /dev entries driver
[ 0.692268] device-mapper: uevent: version 1.0.3
[ 0.692302] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 0.692305] intel_pstate: Intel P-state driver initializing
[ 0.692514] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.692781] NET: Registered protocol family 10
[ 0.692920] NET: Registered protocol family 17
[ 0.692924] Key type dns_resolver registered
[ 0.693058] microcode: sig=0x306c3, pf=0x2, revision=0x1e
[ 0.693127] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.693190] registered taskstats version 1
[ 0.693192] Loading compiled-in X.509 certificates
[ 0.695109] Loaded X.509 cert 'Build time autogenerated kernel key: b2e5ac4e062fe412675f5b442a7ba1394ee14efb'
[ 0.695125] zswap: loaded using pool lzo/zbud
[ 0.704564] Key type big_key registered
[ 0.705652] Key type trusted registered
[ 0.706801] Key type encrypted registered
[ 0.706802] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.706803] ima: No TPM chip found, activating TPM-bypass!
[ 0.706812] evm: HMAC attrs: 0x1
[ 0.707102] Magic number: 1:916:580
[ 0.707121] pci_bus 0000:01: hash matches
[ 0.707190] rtc_cmos 00:02: setting system clock to 2017-05-23 11:33:48 UTC (1495539228)
[ 0.707211] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.707211] EDD information not available.
[ 0.707247] PM: Hibernation image not present or could not be loaded.
[ 0.707915] Freeing unused kernel memory: 1548K (ffffffffb3b6a000 - ffffffffb3ced000)
[ 0.707916] Write protecting the kernel read-only data: 14336k
[ 0.708132] Freeing unused kernel memory: 1396K (ffff8b52c64a3000 - ffff8b52c6600000)
[ 0.708490] Freeing unused kernel memory: 260K (ffff8b52c69bf000 - ffff8b52c6a00000)
[ 0.712603] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.713646] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 0.719655] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.719700] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.719706] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 0.720662] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.720678] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.721251] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.721258] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.721475] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.721498] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.721523] random: udevadm: uninitialized urandom read (16 bytes read)
[ 0.736509] wmi: Mapper loaded
[ 0.736592] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.744603] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.744608] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.746449] [drm] Initialized drm 1.1.0 20060810
[ 0.746510] ahci 0000:00:1f.2: version 3.0
[ 0.746649] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x35 impl SATA mode
[ 0.746651] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.756062] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc4844000e000, 74:d0:2b:9e:fb:40, XID 0c000800 IRQ 26
[ 0.756063] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.759063] r8169 0000:03:00.0 enp3s0: renamed from eth0
[ 0.779639] scsi host0: ahci
[ 0.779769] scsi host1: ahci
[ 0.779833] scsi host2: ahci
[ 0.779877] scsi host3: ahci
[ 0.779923] scsi host4: ahci
[ 0.779968] scsi host5: ahci
[ 0.779992] ata1: SATA max UDMA/133 abar m2048@0xf7e0a000 port 0xf7e0a100 irq 25
[ 0.779992] ata2: DUMMY
[ 0.779993] ata3: SATA max UDMA/133 abar m2048@0xf7e0a000 port 0xf7e0a200 irq 25
[ 0.779994] ata4: DUMMY
[ 0.779995] ata5: SATA max UDMA/133 abar m2048@0xf7e0a000 port 0xf7e0a300 irq 25
[ 0.779996] ata6: SATA max UDMA/133 abar m2048@0xf7e0a000 port 0xf7e0a380 irq 25
[ 0.780194] [drm] Memory usable by graphics device = 2048M
[ 0.780195] [drm] Replacing VGA console driver
[ 0.780707] Console: switching to colour dummy device 80x25
[ 0.785186] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.785187] [drm] Driver supports precise vblank timestamp query.
[ 0.787553] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.919086] random: fast init done
[ 0.986187] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.986478] acpi device:60: registered as cooling_device13
[ 0.986534] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 0.986621] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
[ 0.999195] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.023167] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.093357] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.093414] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.093434] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.093563] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.093753] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 1.093756] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff8b568f0e4f00), AE_NOT_FOUND (20160422/psparse-542)
[ 1.093901] ata6.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[ 1.093902] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.094327] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 1.094329] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff8b568f0e4f00), AE_NOT_FOUND (20160422/psparse-542)
[ 1.094449] ata3.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3MA, max UDMA/133
[ 1.094450] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.094457] ata6.00: configured for UDMA/133
[ 1.095159] ata1.00: ATAPI: ATAPI iHAS124 Y, BL0V, max UDMA/100
[ 1.095259] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 1.095261] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8b568f0e49b0), AE_NOT_FOUND (20160422/psparse-542)
[ 1.095560] ata3.00: configured for UDMA/133
[ 1.095612] ata5.00: NCQ Send/Recv Log not supported
[ 1.095613] ata5.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB0Q, max UDMA/133
[ 1.095613] ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.095747] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 1.095749] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8b568f0e49b0), AE_NOT_FOUND (20160422/psparse-542)
[ 1.096056] ata5.00: NCQ Send/Recv Log not supported
[ 1.096057] ata5.00: configured for UDMA/133
[ 1.097048] ata1.00: configured for UDMA/100
[ 1.098790] scsi 0:0:0:0: CD-ROM ATAPI iHAS124 Y BL0V PQ: 0 ANSI: 5
[ 1.124603] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.124604] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.124693] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.124732] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.124842] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72101 A3MA PQ: 0 ANSI: 5
[ 1.147445] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.147446] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.147598] hub 1-1:1.0: USB hub found
[ 1.147694] hub 1-1:1.0: 6 ports detected
[ 1.159267] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.159281] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.159311] sd 2:0:0:0: [sda] Write Protect is off
[ 1.159312] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.159333] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.159373] scsi 4:0:0:0: Direct-Access ATA Samsung SSD 840 BB0Q PQ: 0 ANSI: 5
[ 1.171649] fbcon: inteldrmfb (fb0) is primary device
[ 1.172608] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.172609] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.172868] hub 2-1:1.0: USB hub found
[ 1.172961] hub 2-1:1.0: 8 ports detected
[ 1.182644] sda: sda1 sda2
[ 1.183019] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.195224] Console: switching to colour frame buffer device 240x67
[ 1.195318] sd 4:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 1.195318] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1.195483] scsi 5:0:0:0: Direct-Access ATA WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[ 1.195491] sd 4:0:0:0: [sdb] Write Protect is off
[ 1.195492] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.195519] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.195805] sdb: sdb1 sdb2 sdb3
[ 1.195974] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 1.214343] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.223275] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 1.223284] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.223285] sd 5:0:0:0: [sdc] 4096-byte physical blocks
[ 1.223397] sd 5:0:0:0: [sdc] Write Protect is off
[ 1.223398] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.223437] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.277827] sdc: sdc1 sdc2 < sdc5 >
[ 1.278207] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 1.439206] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.550205] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c52f
[ 1.550206] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.550207] usb 1-1.1: Product: USB Receiver
[ 1.550208] usb 1-1.1: Manufacturer: Logitech
[ 1.552763] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.556267] usbcore: registered new interface driver usbhid
[ 1.556267] usbhid: USB HID core driver
[ 1.557128] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C52F.0001/input/input4
[ 1.557194] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input0
[ 1.557754] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:046D:C52F.0002/input/input5
[ 1.615403] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.1/input1
[ 1.627216] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[ 1.635216] tsc: Refined TSC clocksource calibration: 3497.972 MHz
[ 1.635220] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x326bd592a83, max_idle_ns: 440795311901 ns
[ 2.058455] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.152081] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 2.152189] systemd[1]: Detected architecture x86-64.
[ 2.152295] systemd[1]: Set hostname to <Asgard>.
[ 2.199599] systemd[1]: Listening on Syslog Socket.
[ 2.199697] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.199709] systemd[1]: Reached target User and Group Name Lookups.
[ 2.199747] systemd[1]: Listening on Journal Audit Socket.
[ 2.199766] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.199785] systemd[1]: Listening on udev Control Socket.
[ 2.199810] systemd[1]: Listening on Journal Socket.
[ 2.251424] lp: driver loaded but no devices found
[ 2.255142] ppdev: user-space parallel port driver
[ 2.358834] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0158
[ 2.358836] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.358836] usb 1-1.2: Product: USB2.0-CRW
[ 2.358837] usb 1-1.2: Manufacturer: Generic
[ 2.358838] usb 1-1.2: SerialNumber: 20060413092100000
[ 2.384790] EXT4-fs (sdb2): re-mounted. Opts: discard,errors=remount-ro
[ 2.386983] usbcore: registered new interface driver usb-storage
[ 2.388278] usbcore: registered new interface driver uas
[ 2.389622] ums-realtek 1-1.2:1.0: USB Mass Storage device detected
[ 2.392393] scsi host6: usb-storage 1-1.2:1.0
[ 2.392457] usbcore: registered new interface driver ums-realtek
[ 2.439216] usb 1-1.4: new full-speed USB device number 5 using ehci-pci
[ 2.457547] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.486279] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 2.486280] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.486280] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.486280] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.486280] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 2.499587] random: crng init done
[ 2.503701] AVX2 version of gcm_enc/dec engaged.
[ 2.503702] AES CTR mode by8 optimization enabled
[ 2.510334] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.521948] intel_rapl: Found RAPL domain package
[ 2.521950] intel_rapl: Found RAPL domain core
[ 2.521951] intel_rapl: Found RAPL domain uncore
[ 2.521952] intel_rapl: Found RAPL domain dram
[ 2.529560] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 2.529562] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.529564] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.529564] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 2.529565] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0
[ 2.529566] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 2.529567] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 2.529568] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 2.529569] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 2.542618] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[ 2.542672] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[ 2.542720] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 2.542775] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 2.542826] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 2.542872] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 2.542921] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 2.542967] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 2.552362] asus_wmi: ASUS WMI generic driver loaded
[ 2.553248] asus_wmi: Initialization: 0x0
[ 2.553263] asus_wmi: BIOS WMI version: 0.9
[ 2.553287] asus_wmi: SFUN value: 0x0
[ 2.553499] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input14
[ 2.553562] asus_wmi: Number of fans: 1
[ 2.556025] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 2.556125] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 2.595708] ath: EEPROM regdomain: 0x809c
[ 2.595709] ath: EEPROM indicates we should expect a country code
[ 2.595710] ath: doing EEPROM country->regdmn map search
[ 2.595710] ath: country maps to regdmn code: 0x52
[ 2.595711] ath: Country alpha2 being used: CN
[ 2.595711] ath: Regpair used: 0x52
[ 2.598979] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 2.599185] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc48441c40000, irq=18
[ 2.624374] usb 1-1.4: New USB device found, idVendor=0416, idProduct=5020
[ 2.624376] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.624377] usb 1-1.4: Product: HID Transfer
[ 2.624378] usb 1-1.4: Manufacturer: Nuvoton
[ 2.624379] usb 1-1.4: SerialNumber: A02014090304
[ 2.625524] input: Nuvoton HID Transfer as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:0416:5020.0003/input/input17
[ 2.625621] hid-generic 0003:0416:5020.0003: input,hidraw2: USB HID v1.10 Device [Nuvoton HID Transfer] on usb-0000:00:1a.0-1.4/input0
[ 2.637659] ath9k 0000:06:00.0 wlp6s0: renamed from wlan0
[ 2.663282] clocksource: Switched to clocksource tsc
[ 3.166595] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.170273] systemd-journald[356]: Received request to flush runtime journal from PID 1
[ 3.202541] Adding 760828k swap on /dev/sdc5. Priority:-1 extents:1 across:760828k FS
[ 3.260177] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.407835] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 3.408160] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 3.412045] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 3.442298] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.483543] audit: type=1400 audit(1495539231.272:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=937 comm="apparmor_parser"
[ 3.484846] audit: type=1400 audit(1495539231.272:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=934 comm="apparmor_parser"
[ 3.484852] audit: type=1400 audit(1495539231.272:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=934 comm="apparmor_parser"
[ 3.484972] audit: type=1400 audit(1495539231.272:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=936 comm="apparmor_parser"
[ 3.484977] audit: type=1400 audit(1495539231.272:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=936 comm="apparmor_parser"
[ 3.484980] audit: type=1400 audit(1495539231.272:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=936 comm="apparmor_parser"
[ 3.485162] audit: type=1400 audit(1495539231.272:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=929 comm="apparmor_parser"
[ 3.485167] audit: type=1400 audit(1495539231.272:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=929 comm="apparmor_parser"
[ 3.485324] audit: type=1400 audit(1495539231.272:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=935 comm="apparmor_parser"
[ 3.720644] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[ 3.722190] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 3.769899] r8169 0000:03:00.0 enp3s0: link down
[ 3.769915] r8169 0000:03:00.0 enp3s0: link down
[ 3.769960] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 5.333925] r8169 0000:03:00.0 enp3s0: link up
[ 5.333932] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 200.227653] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 258.624872] sd 6:0:0:0: [sdd] 62916608 512-byte logical blocks: (32.2 GB/30.0 GiB)
[ 258.626297] sd 6:0:0:0: [sdd] Write Protect is on
[ 258.626302] sd 6:0:0:0: [sdd] Mode Sense: 03 00 80 00
[ 258.635034] sdd: sdd1
[ 259.390377] FAT-fs (sdd1): error, invalid access to FAT (entry 0x0af97cce)
[ 318.599860] FAT-fs (sdd1): error, invalid access to FAT (entry 0x0af97cce)
[ 330.607720] systemd[1]: apt-daily.timer: Adding 2h 55min 6.764547s random time.
[ 330.750776] systemd[1]: apt-daily.timer: Adding 6h 15min 27.848545s random time.
[ 331.134561] systemd[1]: apt-daily.timer: Adding 7h 10min 46.258785s random time.
[ 331.534441] systemd[1]: apt-daily.timer: Adding 5h 35min 1.316088s random time.
[ 331.595744] systemd[1]: apt-daily.timer: Adding 5h 24min 33.915336s random time.
[ 394.306204] FAT-fs (sdd1): error, invalid access to FAT (entry 0x0af97cce)
[ 398.367939] FAT-fs (sdd1): error, invalid access to FAT (entry 0x0af97cce)
[ 921.932665] FAT-fs (sdd1): error, invalid access to FAT (entry 0x0af97cce)
[ 1240.758652] usb 1-1.4: USB disconnect, device number 5
[ 1241.969182] usb 2-1.1: new full-speed USB device number 3 using ehci-pci
[ 1242.078807] usb 2-1.1: New USB device found, idVendor=0416, idProduct=5020
[ 1242.078811] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1242.078813] usb 2-1.1: Product: HID Transfer
[ 1242.078815] usb 2-1.1: Manufacturer: Nuvoton
[ 1242.078816] usb 2-1.1: SerialNumber: A02014090304
[ 1242.080463] input: Nuvoton HID Transfer as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:0416:5020.0004/input/input18
[ 1242.080758] hid-generic 0003:0416:5020.0004: input,hidraw2: USB HID v1.10 Device [Nuvoton HID Transfer] on usb-0000:00:1d.0-1.1/input0
[ 1249.429475] usb 1-1.4: new high-speed USB device number 6 using ehci-pci
[ 1249.538594] usb 1-1.4: New USB device found, idVendor=04b0, idProduct=0222
[ 1249.538598] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1249.538601] usb 1-1.4: Product: NIKON DSC COOLPIX S8200-PTP
[ 1249.538604] usb 1-1.4: Manufacturer: NIKON
[ 1249.538606] usb 1-1.4: SerialNumber: 41032211
[ 1273.015523] usb 1-1.4: USB disconnect, device number 6
[ 1281.686763] usb 1-1.4: new high-speed USB device number 7 using ehci-pci
[ 1281.795853] usb 1-1.4: New USB device found, idVendor=04b0, idProduct=0222
[ 1281.795856] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1281.795857] usb 1-1.4: Product: NIKON DSC COOLPIX S8200-PTP
[ 1281.795859] usb 1-1.4: Manufacturer: NIKON
[ 1281.795860] usb 1-1.4: SerialNumber: 41032211
[ 1317.106608] usb 2-1.1: USB disconnect, device number 3
[ 1577.053894] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 1628.495775] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 1704.122533] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 1841.807461] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 2108.129122] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 2374.755332] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 2428.189362] usb 1-1.2: reset high-speed USB device number 4 using ehci-pci
[ 2556.635006] usb 1-1.2: USB disconnect, device number 4
[ 2556.938162] usb 1-1.2: new high-speed USB device number 8 using ehci-pci
[ 2557.665414] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0158
[ 2557.665415] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2557.665416] usb 1-1.2: Product: USB2.0-CRW
[ 2557.665417] usb 1-1.2: Manufacturer: Generic
[ 2557.665417] usb 1-1.2: SerialNumber: 20060413092100000
[ 2557.667200] ums-realtek 1-1.2:1.0: USB Mass Storage device detected
[ 2557.673931] scsi host6: usb-storage 1-1.2:1.0
[ 2558.702834] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 2558.703114] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 2558.705672] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 2579.098970] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 2597.340130] usb 1-1.4: USB disconnect, device number 7
[ 2718.884127] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 2751.864703] sd 6:0:0:0: [sdd] 7862272 512-byte logical blocks: (4.03 GB/3.75 GiB)
[ 2751.866100] sd 6:0:0:0: [sdd] Write Protect is on
[ 2751.866105] sd 6:0:0:0: [sdd] Mode Sense: 03 00 80 00
[ 2751.874928] sdd: sdd1
[ 2802.202690] systemd[1]: apt-daily.timer: Adding 8h 31min 24.749447s random time.
[ 2994.134015] systemd[1]: apt-daily.timer: Adding 4h 51min 25.275849s random time.
[ 3097.638611] sd 6:0:0:0: [sdd] 7862272 512-byte logical blocks: (4.03 GB/3.75 GiB)
[ 3097.648984] sdd: sdd1
[ 3258.811716] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 3273.675231] sd 6:0:0:0: [sdd] 7862272 512-byte logical blocks: (4.03 GB/3.75 GiB)
[ 3273.685237] sdd: sdd1
[ 3359.651348] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 3413.697004] sd 6:0:0:0: [sdd] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB)
[ 3413.710831] sdd: sdd1
[ 3595.303036] sd 6:0:0:0: [sdd] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB)
[ 3595.315642] sdd: sdd1
[ 3777.242299] usb 1-1.4: new full-speed USB device number 9 using ehci-pci
[ 3777.351371] usb 1-1.4: New USB device found, idVendor=0416, idProduct=5020
[ 3777.351373] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3777.351373] usb 1-1.4: Product: HID Transfer
[ 3777.351374] usb 1-1.4: Manufacturer: Nuvoton
[ 3777.351375] usb 1-1.4: SerialNumber: A02014090304
[ 3777.352277] input: Nuvoton HID Transfer as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:0416:5020.0005/input/input19
[ 3777.352338] hid-generic 0003:0416:5020.0005: input,hidraw2: USB HID v1.10 Device [Nuvoton HID Transfer] on usb-0000:00:1a.0-1.4/input0
[ 3780.726408] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 4395.386074] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 4500.026236] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 4606.678407] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 4766.556582] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 4873.212644] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 4979.896678] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 5033.322679] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 5139.998676] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 5299.856617] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 5779.038282] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 6045.440086] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 6096.981947] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 6353.234997] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 6773.297844] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 6826.751755] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 6880.209690] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 6933.651606] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 7497.706892] systemd[1]: apt-daily.timer: Adding 50min 5.779348s random time.
[ 7498.010368] systemd[1]: apt-daily.timer: Adding 2h 59min 59.067294s random time.
[ 7498.068517] systemd[1]: apt-daily.timer: Adding 5h 35min 10.198275s random time.
[ 7504.636269] systemd[1]: apt-daily.timer: Adding 6h 54min 54.755504s random time.
[ 7505.684215] systemd[1]: apt-daily.timer: Adding 8h 10min 9.314921s random time.
[ 7505.744020] systemd[1]: apt-daily.timer: Adding 5h 11min 56.316679s random time.
[ 7505.850829] systemd[1]: apt-daily.timer: Adding 44min 16.555202s random time.
[ 7506.226646] systemd[1]: apt-daily.timer: Adding 2h 5min 57.184928s random time.
[ 7506.293989] systemd[1]: apt-daily.timer: Adding 38min 12.472451s random time.
[ 7506.350912] systemd[1]: apt-daily.timer: Adding 11h 41min 40.240922s random time.
[ 7506.435459] systemd[1]: apt-daily.timer: Adding 8h 4min 56.648970s random time.
[ 7506.567456] systemd[1]: apt-daily.timer: Adding 5h 26min 59.782894s random time.
[ 7678.922444] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 7732.372391] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 8158.371699] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 8371.460354] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 8443.059283] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 8478.352701] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 8585.188951] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 8585.428963] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 8739.242997] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 8790.688976] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 8844.127021] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 8913.705698] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 9429.957189] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 9462.169910] usb 1-1.4: USB disconnect, device number 9
[ 9643.077138] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[ 9696.655145] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[10069.416951] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[10539.874263] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[10815.032409] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[11932.853573] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[11986.291543] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[12838.006547] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[13263.954115] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[13423.111929] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[14187.655982] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[14435.816834] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[14542.472508] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[15394.178689] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[15500.850524] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[16512.363396] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[17310.865361] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[17364.307331] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[17630.617151] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[18117.879034] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[18322.946544] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[18429.602438] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[18556.555500] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[19068.955350] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[19292.387737] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[19359.942286] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[19436.341203] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[19596.239127] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[20136.707229] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[20403.021110] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[20835.069132] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[20972.758256] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[21185.854167] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[21271.565331] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[21447.603840] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[21505.874015] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[21761.311473] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[21942.150166] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[21985.491769] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[22358.245544] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[22431.864288] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[22501.470877] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[22619.039510] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[22881.349927] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[23039.212080] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[23518.722478] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[23661.895922] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[23881.328244] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[23998.848661] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[24117.625152] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[24310.556453] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[24468.634403] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[24628.508407] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[24681.966431] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[24735.388443] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[25267.796476] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[25534.122485] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[26172.946527] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[26226.400537] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[26283.882695] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[26546.156544] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[26918.897311] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[27016.708691] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[27049.989850] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[27185.670589] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[27239.120486] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[27558.647907] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[27649.159229] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[27764.496399] PM: Syncing filesystems ... done.
[27764.648706] PM: Preparing system for sleep (mem)
[27764.648872] Freezing user space processes ... (elapsed 0.001 seconds) done.
[27764.650664] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds)
[27764.650721] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[27764.651425] PM: Suspending system (mem)
[27764.651449] Suspending console(s) (use no_console_suspend to debug)
[27764.651640] sd 5:0:0:0: [sdc] Synchronizing SCSI cache
[27764.651693] sd 4:0:0:0: [sdb] Synchronizing SCSI cache
[27764.651720] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[27764.651827] sd 2:0:0:0: [sda] Stopping disk
[27764.653605] sd 4:0:0:0: [sdb] Stopping disk
[27764.683236] i8042 kbd 00:07: System wakeup enabled by ACPI
[27764.683361] serial 00:06: disabled
[27764.683363] serial 00:06: System wakeup disabled by ACPI
[27764.717789] sd 5:0:0:0: [sdc] Stopping disk
[27765.247561] PM: suspend of devices complete after 595.965 msecs
[27765.248313] [drm:hsw_write_dcomp [i915]] *ERROR* Failed to write to D_COMP
[27765.255460] PM: late suspend of devices complete after 7.892 msecs
[27765.256579] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[27765.256593] r8169 0000:03:00.0: System wakeup enabled by ACPI
[27765.256814] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[27765.275537] PM: noirq suspend of devices complete after 20.071 msecs
[27765.276553] ACPI: Preparing to enter system sleep state S3
[27765.277562] PM: Saving platform NVS memory
[27765.277663] Disabling non-boot CPUs ...
[27765.279282] smpboot: CPU 1 is now offline
[27765.301579] smpboot: CPU 2 is now offline
[27765.325039] smpboot: CPU 3 is now offline
[27765.347932] Broke affinity for irq 25
[27765.348961] smpboot: CPU 4 is now offline
[27765.371872] Broke affinity for irq 23
[27765.371873] Broke affinity for irq 25
[27765.372879] smpboot: CPU 5 is now offline
[27765.395826] Broke affinity for irq 20
[27765.395829] Broke affinity for irq 23
[27765.395831] Broke affinity for irq 25
[27765.395831] Broke affinity for irq 26
[27765.396836] smpboot: CPU 6 is now offline
[27765.419799] Broke affinity for irq 1
[27765.419806] Broke affinity for irq 9
[27765.419813] Broke affinity for irq 20
[27765.419816] Broke affinity for irq 23
[27765.419818] Broke affinity for irq 25
[27765.419819] Broke affinity for irq 26
[27765.419820] Broke affinity for irq 27
[27765.420830] smpboot: CPU 7 is now offline
[27765.441046] ACPI: Low-level resume complete
[27765.441087] PM: Restoring platform NVS memory
[27765.443051] Enabling non-boot CPUs ...
[27765.465225] x86: Booting SMP configuration:
[27765.465226] smpboot: Booting Node 0 Processor 1 APIC 0x2
[27765.468575] cache: parent cpu1 should not be sleeping
[27765.468738] CPU1 is up
[27765.517239] smpboot: Booting Node 0 Processor 2 APIC 0x4
[27765.520681] cache: parent cpu2 should not be sleeping
[27765.520858] CPU2 is up
[27765.541278] smpboot: Booting Node 0 Processor 3 APIC 0x6
[27765.544725] cache: parent cpu3 should not be sleeping
[27765.544915] CPU3 is up
[27765.577301] smpboot: Booting Node 0 Processor 4 APIC 0x1
[27765.579912] cache: parent cpu4 should not be sleeping
[27765.580068] CPU4 is up
[27765.609249] smpboot: Booting Node 0 Processor 5 APIC 0x3
[27765.611682] cache: parent cpu5 should not be sleeping
[27765.611853] CPU5 is up
[27765.637263] smpboot: Booting Node 0 Processor 6 APIC 0x5
[27765.639803] cache: parent cpu6 should not be sleeping
[27765.639989] CPU6 is up
[27765.661282] smpboot: Booting Node 0 Processor 7 APIC 0x7
[27765.663825] cache: parent cpu7 should not be sleeping
[27765.664028] CPU7 is up
[27765.670391] ACPI: Waking up from system sleep state S3
[27765.677231] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[27765.677247] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[27765.689272] PM: noirq resume of devices complete after 18.549 msecs
[27765.689529] PM: early resume of devices complete after 0.245 msecs
[27765.689588] r8169 0000:03:00.0: System wakeup disabled by ACPI
[27765.689663] rtc_cmos 00:02: System wakeup disabled by ACPI
[27765.690096] serial 00:06: activated
[27765.690110] i8042 kbd 00:07: System wakeup disabled by ACPI
[27765.693275] sd 2:0:0:0: [sda] Starting disk
[27765.693284] sd 4:0:0:0: [sdb] Starting disk
[27765.693284] sd 5:0:0:0: [sdc] Starting disk
[27765.735783] r8169 0000:03:00.0 enp3s0: link down
[27766.039214] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[27766.039233] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[27766.041052] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[27766.041055] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8b568f0e49b0), AE_NOT_FOUND (20160422/psparse-542)
[27766.041358] ata5.00: NCQ Send/Recv Log not supported
[27766.041493] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[27766.041496] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8b568f0e49b0), AE_NOT_FOUND (20160422/psparse-542)
[27766.041792] ata5.00: NCQ Send/Recv Log not supported
[27766.041794] ata5.00: configured for UDMA/133
[27766.090327] ata1.00: configured for UDMA/100
[27766.461438] PM: resume of devices complete after 771.879 msecs
[27766.461577] PM: Finishing wakeup.
[27766.461577] Restarting tasks ...
[27766.465281] pci_bus 0000:05: Allocating resources
[27766.465295] pci 0000:04:00.0: bridge window [io 0x1000-0x0fff] to [bus 05] add_size 1000
[27766.465296] pci 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05] add_size 200000 add_align 100000
[27766.465297] pci 0000:04:00.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05] add_size 200000 add_align 100000
[27766.465299] pci 0000:04:00.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[27766.465300] pci 0000:04:00.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[27766.465301] pci 0000:04:00.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[27766.465302] pci 0000:04:00.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[27766.465302] pci 0000:04:00.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[27766.465303] pci 0000:04:00.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[27766.465308] pci 0000:04:00.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff]
[27766.465315] pci 0000:04:00.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref]
[27766.465321] pci 0000:04:00.0: BAR 13: assigned [io 0x2000-0x2fff]
[27766.465323] pci 0000:04:00.0: PCI bridge to [bus 05]
[27766.465326] pci 0000:04:00.0: bridge window [io 0x2000-0x2fff]
[27766.465335] pci 0000:04:00.0: bridge window [mem 0xdf200000-0xdf3fffff]
[27766.465339] pci 0000:04:00.0: bridge window [mem 0xdf400000-0xdf5fffff 64bit pref]
[27766.467312] done.
[27767.431368] r8169 0000:03:00.0 enp3s0: link up
[27768.981244] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[27768.987654] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[27768.987657] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff8b568f0e4f00), AE_NOT_FOUND (20160422/psparse-542)
[27769.090772] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[27769.090776] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff8b568f0e4f00), AE_NOT_FOUND (20160422/psparse-542)
[27769.090956] ata6.00: configured for UDMA/133
[27769.897270] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[27769.899636] ata3.00: configured for UDMA/133
[27770.159161] IPv6: ADDRCONF(NETDEV_UP): wlp6s0: link is not ready
[27770.159498] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[27770.203766] r8169 0000:03:00.0 enp3s0: link down
[27770.203850] r8169 0000:03:00.0 enp3s0: link down
[27770.203883] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[27771.784209] r8169 0000:03:00.0 enp3s0: link up
[27771.784217] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[27860.895191] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[28151.406899] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[28291.121062] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[28393.706680] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[28508.431657] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[28940.476377] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[29299.279985] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[29459.171316] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[29526.921428] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[29793.240323] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[29907.993728] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[29945.307512] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[29980.585265] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[30300.129428] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[30459.997737] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[30565.936605] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[30620.486266] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[30739.258186] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[30825.741302] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[30901.376161] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[31196.712231] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[31569.464856] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[31884.171501] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[31889.375745] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[31996.160788] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[32847.861463] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[33093.232216] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[33195.859465] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci
[33327.495877] usb 1-1.2: reset high-speed USB device number 8 using ehci-pci+ si on trie avec error, Error ou ERROR :
coeurnoir@Asgard:~$ dmesg | grep error
[ 2.384790] EXT4-fs (sdb2): re-mounted. Opts: discard,errors=remount-ro
[ 259.390377] FAT-fs (sdd1): error, invalid access to FAT (entry 0x0af97cce)
[ 318.599860] FAT-fs (sdd1): error, invalid access to FAT (entry 0x0af97cce)
[ 394.306204] FAT-fs (sdd1): error, invalid access to FAT (entry 0x0af97cce)
[ 398.367939] FAT-fs (sdd1): error, invalid access to FAT (entry 0x0af97cce)
[ 921.932665] FAT-fs (sdd1): error, invalid access to FAT (entry 0x0af97cce)
coeurnoir@Asgard:~$ dmesg | grep Error
[ 1.093753] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 1.093756] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff8b568f0e4f00), AE_NOT_FOUND (20160422/psparse-542)
[ 1.094327] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 1.094329] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff8b568f0e4f00), AE_NOT_FOUND (20160422/psparse-542)
[ 1.095259] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 1.095261] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8b568f0e49b0), AE_NOT_FOUND (20160422/psparse-542)
[ 1.095747] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[ 1.095749] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8b568f0e49b0), AE_NOT_FOUND (20160422/psparse-542)
[27766.041052] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[27766.041055] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8b568f0e49b0), AE_NOT_FOUND (20160422/psparse-542)
[27766.041493] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[27766.041496] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT4._GTF] (Node ffff8b568f0e49b0), AE_NOT_FOUND (20160422/psparse-542)
[27768.987654] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[27768.987657] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff8b568f0e4f00), AE_NOT_FOUND (20160422/psparse-542)
[27769.090772] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160422/psargs-359)
[27769.090776] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff8b568f0e4f00), AE_NOT_FOUND (20160422/psparse-542)
coeurnoir@Asgard:~$ dmesg | grep ERROR
[27765.248313] [drm:hsw_write_dcomp [i915]] *ERROR* Failed to write to D_COMP
coeurnoir@Asgard:~$Les premières error concernent la carte SD que je suppose foireuse.
Les Error et ERROR je sais pas… peut-être rien à voir avec le sujet initial.
Dernière modification par Coeur Noir (Le 23/05/2017, à 23:10)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#19 Le 24/05/2017, à 00:44
- Coeur Noir
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
MicP a écrit :
Ces divergences proviennent du fait que ces fabricants font leur propre format sans respecter certains standards. (…) Pas évident à retrouver, mais voici un de mes souvenir au sujet d'un NIKON : https://forum.ubuntu-fr.org/viewtopic.p … #p21715072
Donc ce qui me reste à évaluer maintenant c'est : est-ce que le comportement que j'obtiens - c'est à dire carte en lecture seule quand insérée dans le lecteur du pc - est « normal » sachant qu'elle provient d'un formatage effectué par APN Nikon ?
Ou reste-t-il un problème de config' dans mon système ?
Comment confirmer aussi que la première carte testée - la 32Gb - est naze ?
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#20 Le 24/05/2017, à 03:11
- MicP
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
Donc ce qui me reste à évaluer maintenant c'est : est-ce que le comportement que j'obtiens - c'est à dire carte en lecture seule quand insérée dans le lecteur du pc - est « normal » sachant qu'elle provient d'un formatage effectué par APN Nikon ?
Hélas, rien que le mot "normal" alors qu'il s'agit d'un formatage "maison", ça fait presque contre-sens : je dirais qu'étant donné qu'on ne sais pas de que l'APN fait avec cette carte, il est impossible d'affirmer quoi que ce soit.
Mais ça me fait quand même un peu penser au comportement des systèmes de fichiers que windows laisse dans un état "unsafe" comme dirait Linux dans ces cas là.
Peut-être que NIKON a ses propre méthodes pour accéder plus vite au contenu de ces cartes…
Comment confirmer aussi que la première carte testée - la 32Gb - est naze ?
Si le matériel et logiciel (lecteur de carte et système) sont en bon état, si la carte n'est pas mécaniquement (la glissière) verrouillée en lecture seule, et si dd n'arrive pas à y écrire des zéros (ou autre chose) sur tout l'espace disque dont elle est censé disposer, c'est sans doute qu'il n'y aura plus rien à en faire => elle est malheureusement "morte"
Hors ligne
#21 Le 24/05/2017, à 07:13
- moko138
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
[HS] MicP :
Merci pour le lien ./viewtopic.php?pid=21715072#p21715072 intéressant !
Je le re-re-lis, mais j'ai du mal à comprendre le rapport.
- Car FAT et CHS n'ont rien à voir (qu'on reformate sdx1 en fat, ntfs, ext, reiserfs, hfs+ ou autre, ça ne changera pas les valeurs {C,H,S} de sdx).
- Comment testdisk, qui discerne pourtant les valeurs correctes :
Warning: the current number of heads per cylinder is 247peut en suggérer d'autres :
but the correct value may be 255.
You can use the Geometry menu to change this value.
It's something to try if
- some partitions are not found by TestDisk
- or the partition table can not be written because partitions overlaps.cela, je le comprends encore,
mais faire cette suggestion de manière si pressante :
Warning: number of heads/cylinder mismatches 255 (FAT) != 247 (HD)
Warning: number of sectors per track mismatches 63 (FAT) != 62 (HD)
(...)
Bad relative sector.???
[/HS]
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#22 Le 24/05/2017, à 07:16
- moko138
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
À vue de pif je dirais mtp/ptp
Je crois me souvenir que c'est toi qui as demandé de l'aide...
Notre héros réussira-t-il à lire la réponse dans son APN
Menu > Configuration > USB ?
Et à le régler, si ce n'est pas son état actuel, sur "mass storage" ?
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne
#23 Le 24/05/2017, à 11:06
- MicP
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
Quand je parle de format, je parle de format en général : du MBR aux partitions en passant par les systèmes de fichiers et les fichiers eux mêmes.
pas seulement du format du système de fichiers.
Si NIKON a décidé (par exemple) de mettre le nombre de têtes (ou autres références) en LSB ou MSB, (ou dans un autre format spécifique),
ça changera TOUT ce que pourrait essayer d'interprêter les applications qui s'attendent à une certaine cohérence standard.
il suffit d'un seul bit situé dans un endroit inattendu, et c'est le désastre.
Alors quand en plus tout ça ne fait que "ressembler" à des formats propriétaires dont nous ne pouvons définir précisément les caractéristiques…
Dernière modification par MicP (Le 24/05/2017, à 11:13)
Hors ligne
#24 Le 24/05/2017, à 12:35
- Coeur Noir
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
moko138 a écrit :
Je crois me souvenir que c'est toi qui as demandé de l'aide...
Notre héros réussira-t-il à lire la réponse dans son APN
Menu > Configuration > USB ?
Et à le régler, si ce n'est pas son état actuel, sur "mass storage" ?
Vilain ;-) ça fait pas longtemps que j'ai ce Nikon D3200 et je ne vois rien dans ses menus ou dans sa notice ( là si tu veux ) qui évoque usb mass storage. Par contre ça fait un peu plus longtemps que j'ai le coolpix S8200 et sur celui-là non plus je n'ai jamais vu d'évocation d'usb mass storage…
…donc non le héros ne peut pas passer la carte en mass-storage car Nikon visiblement ne laisse plus cette possibilité ( elle existe effectivement sur de + anciens appareils à l'époque où mtp/ptp n'étaient pas implémentés sur toutes les versions de …windows ).
Un avis sur le post #18 sinon ?
Dernière modification par Coeur Noir (Le 24/05/2017, à 12:45)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne
#25 Le 24/05/2017, à 12:42
- Coeur Noir
Re : Cartes et lecteur sd(hc) et APN Nikon… les cartes n'apparaissent pas.
MicP a écrit :
Hélas, rien que le mot "normal" alors qu'il s'agit d'un formatage "maison", ça fait presque contre-sens : je dirais qu'étant donné qu'on ne sait pas ce que l'APN fait avec cette carte, il est impossible d'affirmer quoi que ce soit.
Oui ok j'avais moi-même mis des guillemets autour du mot « normal »… je reformule donc : est-ce que d'autres utilisateurs de ces APN constatent le même comportement que moi avec leurs cartes SD ?
Je veux juste savoir si c'est comme ça parce que Nikon, et dans ce cas on a fait le tour de la question, ou s'il y a autre chose à vérifier côté système / logiciel.
Dernière modification par Coeur Noir (Le 24/05/2017, à 12:43)
Débuter ⋅ Doc ⋅ Bien rédiger ⋅ Retour commande ⋅ Insérer image | illustrations & captures d'écran < ⋅ >
Hors ligne