Pages : 1
#1 Le 29/05/2017, à 22:17
- aikizen
pb de conf ripit
salut,
j'ai un magnifique : Track Template incorrect, caused eval to fail: No such file or directory.
je ne comprend pas vraiment le message
voici le fichier de conf :
#####
#
# RipIT 4.0.0-beta20140508 configuration file.
#
# For further information on ripit configuration / parameters
# and examples see the manpage or the README provided with ripit
# or type ripit --help .
#####
#
# Ripping device, permissions & path.
#
# cddevice: Define ripping device if other than /dev/cdrom.
# Default: /dev/cdrom
cddevice=/dev/cdrom
# scsidevice: Device name for special devices if the non ripping
# commands should be executed on a different device node. This might
# be useful for some old SCSI devices. If not set the cddevice will
# be used.
# Example: /dev/sr18
# Default: not set
scsidevice=/dev/sr0
# output: Path for audio files. If not set, $HOME will be used.
# Default: not set
output=
# directory permissions: Permissions for directories.
# Default: 0755
dpermission=0755
# file permissions: Permissions for sound and log files.
# If not set, uses the default system settings.
# Default: not set
fpermission=0755
#####
#
# Ripping options.
#
# ripper: select CD ripper
# 0 - dagrab
# 1 - cdparanoia
# 2 - cdda2wav
# 3 - rip (Morituri)
# 4 - cdd (support not ensured)
# Default: cdparanoia
ripper=1
# ripopt: User definable options for the CD ripper.
# Example: when using cdda2wav: -v summary
# Default: not set
ripopt=
# offset: User definable sample offset for the CD ripper. This will
# trigger option -O when using cdparanoia and option -o when using rip.
# Icedax (cdda2wav) seems not to provide a sample offset.
# Possible values: integers
# Example: 48
# Default: 0
offset=0
# span: Rip only part of a single track or the merged track-interval.
# Possible values: any in the format hh:mm:ss.ff-hh:mm:ss.ff
# Example: rip first 30s of each track: 0-30
# Default: not set
span=
# paranoia: Turn "paranoia" on or off for dagrab and cdparanoia.
# Possible values: 0 - no paranoia, 1 - use paranoia
# 2 - switch paranoia off if ripping fails on one
# track and retry this track without paranoia
# Default: 1 - use paranoia
paranoia=1
# ghost: Analyze the wavs for possible gaps, split the wav into
# chunks of sound and delete blank tracks.
# Possible values: 0 - off, 1 - on
# Default: off
ghost=0
# prepend: Enlarge the chunk of sound by a number of
# seconds at the beginning (if possible).
# Possible values: any positive number and zero; precision in
# tenths of seconds. Be aware of low numbers, especially when
# using option cdcue.
# Default: 2.0
prepend=2
# extend: Enlarge the chunk of sound by a number of
# seconds at the end (if possible).
# Possible values: any positive number and zero; precision in
# tenths of seconds. Be aware of low numbers.
# Default: 2.0
extend=2
# resume: Resume a previously started session.
# Possible values: 0 - off, 1 - on
# Default: off
resume=0
# overwrite: Default behaviour of Ripit is not to overwrite existing
# directories, a suffix will be added if directory name exists.
# Use option overwrite to prevent this and either overwrite a previous
# rip or force Ripit to quit or even eject the disc. If ejection is
# chosen, the disc will be ejected even if option eject has not been
# switched on.
# Possible values: n - off, y - on,
# q - quit, e - quit and force ejection
# Default: off
overwrite=n
# accuracy: Check ripped tracks using rip (Morituri) for accuracy with
# AccurateRip DB in case tracks have been ripped without rip (Morituri).
# Note: Option is defunct, rip (Morituri) will re-rip the whole disc.
# Possible values: 0 - off, 1 - on
# Default: off
accuracy=0
# verify: Rip each track $verify times (or less) until at least 2 rips
# give the same md5sum.
# Possible: any integer
# Example: 3
# Default: 1
verify=1
#####
#
# Encoding options
#
# encode: Encode the wavs.
# Possible values: 0 - off, 1 - on
# Default: on
encode=1
# coder: Select encoders for audio files:
# 0 - Lame (mp3)
# 1 - Oggenc (ogg)
##2 - Flac (flac)
# 3 - Faac (m4a)
# 4 - mp4als (als or mp4)
# 5 - Musepack (mpc)
# 6 - Wavpack (wv)
# 7 - ffmpeg
# Multiple encoders can be selected by giving a comma separated list
# Example: coder=0,0,1,2 encodes CD twice to mp3, ogg and flac files
# Default: Lame
coder=2
###
#
# lame (mp3) encoder options
#
# qualame: Sets audio quality for lame encoder in cbr (lame-option -q)
# and vbr (lame-option -V) mode, comma separated list if encoder is
# used several times.
# Possible values: 0...9, off
# 0: highest quality
# 9: lowest quality
# Can be set to "off" if all options are passed to --lameopt.
# Example: qualame=off,off
# Note: default value is the same for cbr and vbr,
# although vbr-default should be 4.
# Default: 5
qualame=off
# lameopt: Additional options for lame encoder,
# use a comma separated list if encoder is used several times.
# Example: lameopt=-b 128,--preset extreme
# Default: not set
lameopt=
# vbrmode: Enable variable bitrate for lame encoder.
# Possible values: "old" or "new"
# Default: not set
vbrmode=
# bitrate: Sets bitrate for lame encoder.
# Possible values: 32...320, off
# Should be set to "off" if vbr is used
# Default: 128
bitrate=128
# maxrate: Sets maximum bitrate for lame (when using vbr) and oggenc.
# Possible values: 0 - off, 32...320
# Default: 0
maxrate=0
# preset: Use lame presets. To set the "fast" switch, use --vbrmode new.
# Possible values: medium, standard, extreme, insane
#
# medium: 160kbps
# standard: 192kbps
# extreme: 256kbps
# insane: 320kbps
#
# Default: not set
preset=
###
#
# oggenc (ogg) encoder options
#
# qualoggenc: Sets audio quality for oggenc.
# Possible values: 1..10, off
# 1: lowest quality
# 10: highest quality
# Can be set to "off"
# Default: 3
qualoggenc=3
# oggencopt: Additional options for oggenc,
# use a comma separated list if encoder is used several times.
# Default: not set
oggencopt=
###
#
# flac (lossless) encoder options
#
# quaflac: Sets audio compression for flac encoder
# Possible values: 0...8, off
# 0: lowest compression
# 8: highest compression
# Can be set to "off"
# Default: 5
quaflac=5
# flacopt: Additional options for flac encoder,
# use a comma separated list if encoder is used several times.
# Example of single encoder:
# flacopt=--padding=8212 --replay-gain
# Example of multiple encoder:
# flacopt=--padding=8212 --replay-gain,--padding=8212
# Note: If using the --replay-gain option the padding option
# is recommended, otherwise all padding might be lost.
# Default: not set
flacopt=
# flacdecopt: Additional options for flac when used to decode flacs.
# Might be needed to force (over) writing existing wav files
# Example: flacdecopt="--totally-silent -f"
# Default: -s (silent)
flacdecopt=-s
###
#
# faac (m4a) encoder options
#
# quafaac: Sets audio quality for faac encoder
# Possible values: 10...500, off
# 10: lowest quality
# 500: highest quality
# Can be set to "off"
# Default: 100
quafaac=100
# faacopt: Additional options for faac encoder,
# comma separated list if encoder is used several times.
# Default: not set
faacopt=
###
#
# mp4als (als or mp4) encoder options
#
# quamp4als: Set audio compression level for mp4als.
# Note: Options that influence compression and speed
# should be used in the mp4als options below.
# Default: 0
quamp4als=0
# mp4alsopt: Additional options for mp4als encoder,
# comma separated list if encoder is used several times.
# Example: -MP4 to allow tagging, mandatory.
# Example: -a -o30 for faster speed.
# Default: not set
mp4alsopt=
###
#
# Musepack (mpc) encoder options
#
# musenc: The encoder name on the command line
# Possible values: any
# Example: musenc=mppenc for older versions
# Default: mpcenc
musenc=mpcenc
# quamuse: Sets audio quality for Musepack encoder
# Possible values: 0...10, off
# 0: lowest quality
# 10: highest quality
# Can be set to "off"
# Default: 5
quamuse=5
# museopt: Additional options for Musepack encoder,
# use a comma separated list if encoder is used several times.
# Default: not set
museopt=
###
#
# Wavpack (wv) encoder options
#
# wavpacopt: Additional options for Wavpack encoder,
# use a comma separated list if encoder is used several times.
# Example: -b320chy
# Default: -y
wavpacopt=-y
###
#
#ffmpeg encoder options
#
# ffmpegopt: Additional options for ffmpeg,
# use a comma separated list if encoder is used several times.
# Example if ffmpeg is used twice: -acodec alac,-acodec wmav2
# Default: off
ffmpegopt=
# ffmpegsuffix: Suffix to be used for ffmpeg,
# use a comma separated list if encoder is used several times.
# Example if ffmpeg is used twice: m4a,wma
# Default: off
ffmpegsuffix=
#####
#
# Track name and directory template
#
# dirtemplate: Template for directory structure
# The template can be created using any legal
# character, including slashes (/) for multi-level
# directory-trees, and the following variables:
# $album
# $artist
# $iletter
# $genre
# $quality
# $suffix
# $trackname
# $tracknum
# $year
# $trackno
#
# The variable $iletter is the initial letter of
# the artist variable, the $quality is the quality
# according to the encoding format defined by $suffix.
# The variable $quality reflects the encoder options,
# not the arguments of option --quality which may be set
# to off. The variable $trackno is the total number of tracks
# of the release.
#
# dirtemplate is an array, for each encoder a different
# dirtemplate may be defined (i. e. for each encoder state
# a line starting with dirtemplate=...).
#
# Example:
# dirtemplate="$suffix/hard_path/$iletter/$artist/$year - $album"
#
# The double quotes (") are mandatory!
# Default: "$artist - $album"
dirtemplate="$suffix/home/aiki/Musique/Zic"
# tracktemplate: Template for track names
# "tracktemplate" is used similarly to "dirtemplate" but allows two
# more variables helpful in case VA-style is detected:
# $trackartist
# $tracktitle
# Note: $trackartist will be filled with the value of $artist in case
# no track artist has been found to respect the templates settings.
# Example:
# tracktemplate="$tracknum: $tracktitle performed by $trackartist"
# Default: "$tracknum $trackname"
tracktemplate="$genre_$artist-$year-$album_\\[$tracknum-$trackno\\]_$trackname_$quality"
# trackoffset: Add an offset to the track counter ($tracknum)
# Possible values: any integer
# Default: 0
trackoffset=1
# addtrackoffset: When using MusicBrainz automatically add an offset
# to the track counter ($tracknum) in case a multi disc release has
# been detected.
# Possible values: 0 - off, 1 - on
# Default: off
addtrackoffset=1
# infolog: Log certain operations to file
# (e.g. system calls, creation of dirs/files)
# Possible values: filename (full path, no ~ here!)
# Default: not set
infolog=1
# lowercase: Convert filenames and or directory names to lowercase
# Possible values: 0 - off, 1 - on (for both file and direcotry names)
# 2 - on (only file names), 3 - on (only directory
# names)
# Default: off
lowercase=1
# uppercasefirst: Convert filenames and tags to uppercase first,
# not recommended. To be used on the command line only if CDDB entry
# is in uppercase.
# Possible values: 0 - off, 1 - on
# Default: off
uppercasefirst=1
# underscore: Replace blanks in filenames with underscores
# Possible values: 0 - off, 1 - on
# Default: off
underscore=1
# chars: Exclude special characters in file names and path.
# Note: following characters will always be purged:
# ; > < " and \015 .
# Side note: if calling this option on the command line without
# argument, following characters will be purged: |\:*?$ plus
# blanks and periods at beginning and end of file names and directories.
# This is identical to the word NTFS passed as argument to the command
# line or stated here in the config file. The word HFS will purge colons
# only plus blanks and periods at beginning of file names and
# directories.
#
# No need to escape the special characters here in the config file.
# Possible values: HFS, NTFS, none, any (?)
# Default: not set
chars=any
# playlist: Create m3u playlist with or without the full path
# in the filename.
# Possible values: 0 - off,
# 1 - on with full path
# 2 - on with no path (filename only)
# Default: on (with full path)
playlist=1
#####
#
# Audio file tagging
#
# year-tag: State a year (mp3, m4a) or a date (ogg, flac) tag.
# Possible values: integer
# Default: not set
year=1
# comment-tag: State a comment (mp3, m4a, mpc) or a
# description (ogg, flac) tag. To write the cddbid used for freedb
# or the MusicBrainz discid into the comment, use the word "cddbid"
# or "discid".
# Possible values: discid, cddbid or any string
# Default: not set
comment=1
# flactags: Additional tags for flac not passed by the encoder to ensure
# evaluation of special strings similar to mp3tags. Use option
# --flacopt "--tag=FRAME=foo" for additional hard coded tags instead.
# When using MB providing additional meta data can be added using the
# string FRAME=frame.
# Example: Add asin:
# flactags=ASIN=asin
# Note: option is an array, for each additional frame/tag to be added
# state the option once.
# Possible values: none, any (?)
# Default: not set
flactags=any
# oggtags: Same as flactags.
oggtags=
# mp3tags: Additional tags for mp3 not passed by the encoder.
# Example: Add url tag:
# mp3tags=WUOF=www.id3v2.org
# Add a special track annotation:
# mp3tags=TXXX=[ASIN]B00654321
# Force an unofficial compilation frame when using a certain player:
# mp3tags=TCMP=1
# Special tags will be evaluated in case the meta data is provided
# mp3tags=TXXX=[ASIN]asin
# mp3tags=TXXX=[DISCID]discid
# Note: option is an array, for each additional frame/tag to be added
# state the option once.
# Possible values: none, any (?)
# Default: not set
mp3tags=
# utftag: Use Lame-tags in UTF-8 or convert them
# (but not the filenames) from Unicode to ISO8859-1.
# Use when your mp3-audio player doesn't support Unicode tags.
# May be useful with Lame. Experimental use in combination with option
# --threads or --sshlist.
# Possible values: 0 - off, 1 - on
# Default: on
utftag=1
# coverart: Add cover image to meta data of encoded file if possible.
# Note: The cover must be available when encoding starts and specified
# with option --coverpath (below). One might want to use option
# --precmd to execute a script for downloading and preparing a cover.
# Argument is a list in same order as encoders with
# values 0 (no coverart) or 1 (add coverart) for each encoder.
# Example: 1,0,0,1
# Possible values: 0 - off, 1 - on
# Default: off
coverart=1
# coverorg: If set coverart will be retrieved from coverartarchive.org.
# Possible values: 0 - off, 1 - on
# Default: off
coverorg=1
# coverpath: Path where the cover can be found, mandatory with option
# --coverart. Note that the full path is required unless you know what
# you do. The same variables as in option --dirtemplate may be
# used and need to be quoted.
# Example: "$wavdir/../thumb.png"
# Possible values: string, none
# Default: none
coverpath=
# coversize: Alter size of provided cover to be added to tags and rename
# the original cover making use of the ImageMagick package.
# Example: 320
# Possible values: any valid format treated by ImageMagick
# Default: none
coversize=
# copycover: Copy a cover (or any other file) with full path to all
# directories containing encoded files. The same variables as in option
# --dirtemplate may be used and need to be quoted.
# Example: /media/snd/covers/cover.png
# Possible values: none - off, absolute path to image
# Default: off
copycover=
# mbrels: MusicBrainz relationships will be retrieved for each track to
# add vocal performer names in the form "(featuring PERFORMER)" or
# (covering WORK) if found.
# Possible values: 0 - off, 1 - on
# Default: off
mbrels=1
# vatag: Analyze track names for "various artists" style and split
# the meta data in case one of the delimiters (colon, hyphen, slash or
# parenthesis) are found. Use unpair numbers for the scheme
# "artist ? tracktitle" and pair numbers in the opposite case.
# The artist will be compared to the argument of option --vastring
# (see below). If the artist must be like vastring and each track have a
# delimiter, use 1 (2), if the artist must be like vastring while only
# some tracks contain the delimiter, use 3 (4), if no restrictions
# apply for the artist but all track names must have a delimiter, use
# 5 (6) and finally, if only a few tracks contain a delimiter to be
# used as splitting point, set vatag to 7 (8).
# Example: 5
# Possible values: 0 - off, 1, 2, 3, 4, 5, 6, 7, 8
# Default: off
vatag=0
# vastring: the string (regular expression) that defines the
# "various artists" style
# Example: Varios|VA
# Possible values: string, none
# Default: \bVA\b|Variou*s|Various\sArtists|Soundtrack|OST
vastring=\bVA\b|Variou*s|Various Artists|Soundtrack|OST
# mp3gain: Add album gain tags to mp3 files using the appropriate
# command with options and arguments but without in-files.
# Example: mp3gain -a -c -q -s i
# Default: not set
mp3gain=
# vorbgain: Add album gain tags to ogg files using the appropriate
# command with options and arguments but without in-files.
# Example: vorbisgain -a -q
# Default: not set
vorbgain=
# flacgain: Add album gain tags to flac files using the appropriate
# command with options and arguments but without in-files.
# Example: metaflac --add-replay-gain
# Default: not set
flacgain=
# aacgain: Add album gain tags to mp4 or m4a files using the appropriate
# command with options and arguments but without in-files.
# Example: aacgain -a -c -q
# Default: not set
aacgain=
# mpcgain: Add album gain tags to mpc files using the appropriate
# command with options and arguments but without in-files.
# Example: mpcgain
# Default: not set
mpcgain=
# wvgain: Add album gain tags to wv files using the appropriate
# command with options and arguments but without in-files.
# Example: wvgain -a -q
# Default: not set
wvgain=
#####
#
# CDDB options
#
# mb: Access MusicBrainz DB via WebService::MusicBrainz module instead
# of the http protocol (see below).
# Possible values: 0 - off, 1 - on
# Default: off
mb=0
# CDDBHOST: Specifies the CDDB server
# Possible values: freedb.org, freedb2.org or musicbrainz.org
# Note: Full name of the server used is $mirror.$CDDBHOST, except for
# freedb2.org (no mirror) and musicbrainz.org has freedb as default
# mirror.
# E.g. default server is freedb.freedb.org
# Default: freedb.org
CDDBHOST=freedb.org
# mirror: Selects freedb mirror
# Possible values: "freedb" or any freedb mirrors
# See www.freedb.org for mirror list
# Note: Full name of the server used is $mirror.$CDDBHOST
# E.g., default server is freedb.freedb.org
# Default: freedb
mirror=freedb
# transfer: Set transfer mode for cddb queries
# Possible values: cddb, http
# Note: CDDB servers freedb2.org and musicbrainz.org may need transfer
# mode http.
# Default: cddb
transfer=cddb
# proto: Set CDDP protocol level
# Possible values: 5, 6
# Protocol level 6 supports Unicode (UTF-8)
# Default: 6
proto=6
# proxy: Address of http-proxy, if needed.
# Default: not set
proxy=
# mailad: Mail address for cddb submissions.
# Possible values: Valid user email address for submitting cddb entries
# Default: not set
mailad=aikizen@xxxxxx
# mailopt: Additional options for sendmail.
# Possible values: Any sendmail options.
# Default: -t
mailopt=-t
# archive: Read and save cddb data on local machine.
# Possible values: 0 - off, 1 - on
# Default: off
archive=1
# submission: Submit new or edited cddb entries to freeCDDB.
# Possible values: 0 - off, 1 - on
# Default: on
submission=1
# interaction: Turns on or off user interaction in cddb dialog and
# everywhere else.
# Possible values: 0 - off, 1 - on
# Default: on
interaction=1
# isrc: detect track ISRCs using icedax and submit them to Musicbrainz
# if login info is provided. Please check if the device in use is
# able to read correct ISRCs and submit them if found.
# Possible values: 0 - off, 1 - on
# Default: off
isrc=0
# mbname: login name to Musicbrainz.org
# Possible values: string
# Default: not set
mbname=
# mbpass: password to Musicbrainz.org
# Possible values: string
# Default: not set
mbpass=
# cdtext: check if CD text is present and use it if no DB entry found.
# Possible values: 0 - off, 1 - on
# Default: off
cdtext=0
#####
#
# LCD options
#
# lcd: Use lcdproc to display status on LCD
# Possible values: 0 - off, 1 - on
# Default: off
lcd=0
# lcdhost: Specify the lcdproc host
# Default: localhost
lcdhost=localhost
# lcdport: Specify port number for localhost
# Default: 13666
lcdport=13666
#####
#
# Distributed ripping options
#
# sshlist: Comma separated list of remote machines ripit shall use
# for encoding. The output path must be the same for all machines.
# Specify the login (login@machine) only if not the
# same for the remote machine. Else just state the
# machine names.
# Default: not set
sshlist=
# scp: Copy files to encode to the remote machine.
# Use if the fs can not be accessed on the remote machines
# Possible values: 0 - off, 1 - on
# Default: off
scp=0
# local: Turn off encoding on local machine, e.g. use only remote
# machines.
# Possible values: 0 - off, 1 - on
# Example: local=0 (off) turns off encoding on the
# local machine
# Default: on
local=1
#####
#
# Misc. options
#
# verbosity: Run silent (do not output comments, status etc.) (0), with
# minimal (1), normal without encoder msgs (2), normal (3), verbose (4)
# or extremely verbose (5).
# Possible values: 0...5
# Default: 3 - normal
verbose=3
# eject: Eject cd after finishing encoding.
# Possible values: 0 - off, 1 - on
# Default: off
eject=1
# ejectcmd: Command used to eject and close CD tray.
# Possible values: string
# Example: /usr/sbin/cdcontrol for FreeBSD
# Default: eject
ejectcmd=eject
# ejectopt: Options to command used to eject or close CD.
# Possible values: string or "{cddev}" to design the CD
# device.
# Note: Don't use options -t / close or eject,
# RipIT knows when to eject or load the tray
# Default: {cddev}
ejectopt={cddev}
# quitnodb: Give up CD if no CDDB entry found.
# Useful if option --loop or --nointeraction are on.
# Default behaviour is to let operator enter data or to use default
# artist, album and track names.
# Possible values: 0 - off, 1 - on
# Default: off
quitnodb=0
# execmd: Execute a command when done with ripping. Quote the command
# if needed.
# Note: The same variables as in the dirtemplate can be used. When
# using MusicBrainz one might want to use $cd{asin} to get the ASIN
# if available.
# Possible values: none - off, string - on
# Example: execmd="add_db -a \"$artist\" -r \"$album\""
# Default: off
execmd=
# precmd: Execute a command before starting to rip. Quote the command
# if needed.
# Note: The same variables as in the dirtemplate can be used. When
# using MusicBrainz one might want to use $cd{asin} to get the ASIN
# if available.
# Possible values: none - off, string - on
# Example: precmd="get_cover -a \"$artist\" -r \"$album\" -o \"$wavdir\" -t \"$trackno\""
# Default: off
precmd=
# book: Create an audiobook, i. e. merge all tracks into one single
# file, option --ghost will be switched off and file suffix will be
# m4b. Make sure to use encoder faac, ripit will not check that.
# A chapter file will be written for chapter marks.
# Possible values: 0 - off, 1 - on
# Default: off
book=0
# loop: Continue with a new CD when the previous one is done.
# Option --eject will be forced. To start ripping process immediately
# after ejection of previous disc, use experimental argument 2. Ripit
# will restart as child process, one might see the prompt and it will
# be necessary to manually terminate the process! Use with caution!
# Possible values: 0 - off, 1 - on, 2 - immediate restart, experimental
# Default: off
loop=0
# halt: Powers off machine after finishing encoding.
# Possible values: 0 - off, 1 - on
# Default: off
halt=0
# nice: Sets "nice" value for the encoding process.
# Possible values: 0..19 for normal users,
# -20..19 for user "root"
# Default: 0
nice=0
# nicerip: Sets "nice" value for the ripping process.
# Possible values: 0..19 for normal users,
# -20..19 for user "root"
# Default: 0
nicerip=0
# threads: Comma separated list of numbers giving maximum
# of allowed encoder processes to run at the same time
# (on each machine when using sshlist).
# Possible values: comma separated integers
# Default: 1
threads=1
# md5sum: Create file with md5sums for each type of sound files.
# Possible values: 0 - off, 1 - on
# Default: off
md5sum=1
# wav: Don't delete wave-files after encoding.
# Possible values: 0 - off, 1 - on
# Default: off
wav=0
# normalize: Normalizes the wave-files to a given dB-value
# (default: -12dB)
# See http://normalize.nongnu.org for details.
# Possible values: 0 - off, 1 - on
# Default: off
normalize=1
# normcmd: Command to be used to normalize.
# Possible values: string
# Example: normalize-audio (when using Debian)
# Upstream default: normalize
# We are running Debian so set to normalize-audio
normcmd=normalize-audio
# normopt: Options to pass to normalize
# Possible values: -a -nndB : Normalize to -nn dB, default is -12dB,
# Value range: All values <= 0dB
# Example : normalize -a -20dB *.wav
# -b : Batch mode - loudness differences
# between individual tracks of a CD are
# maintained
# -m : Mix mode - all track are normalized to
# the same loudness
# -v : Verbose operation
# -q : Quiet operation
# For further options see normalize documentation.
# Default: -b
# The -v option will be added by default according to RipITs verbosity
normopt=-b
# cdtoc: Create a toc file to burn the wavs with
# cd-text using cdrdao or cdrecord (in dao mode).
# Possible values: 0 - off, 1 - on
# Default: off
cdtoc=0
# inf: Create inf files to burn the wavs with
# cd-text using wodim or cdrecord (in dao mode).
# Possible values: 0 - off, 1 - on
# Default: off
inf=0
# cdcue: Create a cue file to burn the wavs with cd-text.
# Note that all tracks will be merged and normalized.
# Possible values: 0 - off, 1 - on, 2 - on (experimental fallback)
# Note: Use value 2 only if for whatever reason value 1 should fail.
# Default: off
cdcue=0
Hors ligne
#2 Le 30/05/2017, à 11:02
- Machtheld
Re : pb de conf ripit
Salut,
Ripit ne cherche peut-être pas le bon lecteur de cd?
Hors ligne
Pages : 1