Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 13/06/2017, à 08:30

gycath

ecriture sur cle USB impossible [RESOLU]

Bonjour,
Je suis sur ubuntu 14 04 LTS et depuis hier, de façon inattendue ma clé USB n’accepte pas de Copier/Coller de fichiers. Pensant que cela dépendait d'un problème lié à la clé, j'en ai changé mais le problème persiste avec toutes les autres clés (toutes se montent correctement sont accessibles en lecture mais pas en écriture).
Que me conseillez vous ?
Je vous remercie par avance

Dernière modification par gycath (Le 14/06/2017, à 03:52)

Hors ligne

#2 Le 13/06/2017, à 09:34

malbo

Re : ecriture sur cle USB impossible [RESOLU]

Bonjour,
Cette clé USB étant connectée, je te prie de faire un Boot-Info depuis une session de ton Ubuntu 14.04 et de donner l'URL de ce Boot-Info dans ta réponse.
Remarque : je te demande de connecter la clé USB parce qu'il est possible que le Boot-Info nous révèle une anomalie concernant cette clé.

Dernière modification par malbo (Le 13/06/2017, à 09:36)

Hors ligne

#3 Le 13/06/2017, à 16:47

gycath

Re : ecriture sur cle USB impossible [RESOLU]

Bonjour malbo et merci pour ton aide
voici l'adresse: http://paste.ubuntu.com/24849715/ clé connectée

Hors ligne

#4 Le 13/06/2017, à 17:03

malbo

Re : ecriture sur cle USB impossible [RESOLU]

Ton Boot-Info est là :

 Boot Info Script cfd9efe + Boot-Repair extra info      [Boot-Info 26Apr2016]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => MS-DOS 3.30 through Windows 95 (A) is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 14.04.5 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/extlinux/extlinux.conf 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Unknown
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048   616,970,239   616,968,192  83 Linux
/dev/sda2         616,972,286   625,141,759     8,169,474   5 Extended
/dev/sda5         616,972,288   625,141,759     8,169,472  82 Linux swap / Solaris


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 8053 MB, 8053063680 bytes
2 heads, 63 sectors/track, 124830 cylinders, total 15728640 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *             64    15,728,639    15,728,576   b W95 FAT32


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        272a6b19-0e84-4ed9-b0b7-2218b376d8e4   ext4       
/dev/sda5        fc181480-9d9b-4d5d-b456-2c6bb3032dba   swap       
/dev/sdb1        003C-625F                              vfat       STORE N GO

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Jun 13 17:42 ata-ST320LM001_HN-M320MBB_S2ZXJ9KDB01602 -> ../../sda
lrwxrwxrwx 1 root root 10 Jun 13 17:32 ata-ST320LM001_HN-M320MBB_S2ZXJ9KDB01602-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jun 13 17:32 ata-ST320LM001_HN-M320MBB_S2ZXJ9KDB01602-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jun 13 17:32 ata-ST320LM001_HN-M320MBB_S2ZXJ9KDB01602-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 Jun 13 17:32 ata-TSSTcorp_CDDVDW_SN-208DB_R8XW6YJD30045X -> ../../sr0
lrwxrwxrwx 1 root root  9 Jun 13 17:42 usb-Verbatim_STORE_N_GO_1312031403490394818706-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jun 13 17:39 usb-Verbatim_STORE_N_GO_1312031403490394818706-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root  9 Jun 13 17:42 wwn-0x50004cf20babbe18 -> ../../sda
lrwxrwxrwx 1 root root 10 Jun 13 17:32 wwn-0x50004cf20babbe18-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jun 13 17:32 wwn-0x50004cf20babbe18-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jun 13 17:32 wwn-0x50004cf20babbe18-part5 -> ../../sda5

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /                        ext4       (rw,errors=remount-ro)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  272a6b19-0e84-4ed9-b0b7-2218b376d8e4
else
  search --no-floppy --fs-uuid --set=root 272a6b19-0e84-4ed9-b0b7-2218b376d8e4
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=0
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 0 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-272a6b19-0e84-4ed9-b0b7-2218b376d8e4' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  272a6b19-0e84-4ed9-b0b7-2218b376d8e4
	else
	  search --no-floppy --fs-uuid --set=root 272a6b19-0e84-4ed9-b0b7-2218b376d8e4
	fi
	linux	/boot/vmlinuz-3.13.0-119-generic root=UUID=272a6b19-0e84-4ed9-b0b7-2218b376d8e4 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-3.13.0-119-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-272a6b19-0e84-4ed9-b0b7-2218b376d8e4' {
	menuentry 'Ubuntu, avec Linux 3.13.0-119-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-119-generic-advanced-272a6b19-0e84-4ed9-b0b7-2218b376d8e4' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  272a6b19-0e84-4ed9-b0b7-2218b376d8e4
		else
		  search --no-floppy --fs-uuid --set=root 272a6b19-0e84-4ed9-b0b7-2218b376d8e4
		fi
		echo	'Chargement de Linux 3.13.0-119-generic…'
		linux	/boot/vmlinuz-3.13.0-119-generic root=UUID=272a6b19-0e84-4ed9-b0b7-2218b376d8e4 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-119-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-119-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-119-generic-recovery-272a6b19-0e84-4ed9-b0b7-2218b376d8e4' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  272a6b19-0e84-4ed9-b0b7-2218b376d8e4
		else
		  search --no-floppy --fs-uuid --set=root 272a6b19-0e84-4ed9-b0b7-2218b376d8e4
		fi
		echo	'Chargement de Linux 3.13.0-119-generic…'
		linux	/boot/vmlinuz-3.13.0-119-generic root=UUID=272a6b19-0e84-4ed9-b0b7-2218b376d8e4 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-119-generic
	}
	menuentry 'Ubuntu, avec Linux 3.13.0-117-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-117-generic-advanced-272a6b19-0e84-4ed9-b0b7-2218b376d8e4' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  272a6b19-0e84-4ed9-b0b7-2218b376d8e4
		else
		  search --no-floppy --fs-uuid --set=root 272a6b19-0e84-4ed9-b0b7-2218b376d8e4
		fi
		echo	'Chargement de Linux 3.13.0-117-generic…'
		linux	/boot/vmlinuz-3.13.0-117-generic root=UUID=272a6b19-0e84-4ed9-b0b7-2218b376d8e4 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-117-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-117-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-117-generic-recovery-272a6b19-0e84-4ed9-b0b7-2218b376d8e4' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  272a6b19-0e84-4ed9-b0b7-2218b376d8e4
		else
		  search --no-floppy --fs-uuid --set=root 272a6b19-0e84-4ed9-b0b7-2218b376d8e4
		fi
		echo	'Chargement de Linux 3.13.0-117-generic…'
		linux	/boot/vmlinuz-3.13.0-117-generic root=UUID=272a6b19-0e84-4ed9-b0b7-2218b376d8e4 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-117-generic
	}
	menuentry 'Ubuntu, avec Linux 3.13.0-109-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-109-generic-advanced-272a6b19-0e84-4ed9-b0b7-2218b376d8e4' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  272a6b19-0e84-4ed9-b0b7-2218b376d8e4
		else
		  search --no-floppy --fs-uuid --set=root 272a6b19-0e84-4ed9-b0b7-2218b376d8e4
		fi
		echo	'Chargement de Linux 3.13.0-109-generic…'
		linux	/boot/vmlinuz-3.13.0-109-generic root=UUID=272a6b19-0e84-4ed9-b0b7-2218b376d8e4 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-109-generic
	}
	menuentry 'Ubuntu, with Linux 3.13.0-109-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-109-generic-recovery-272a6b19-0e84-4ed9-b0b7-2218b376d8e4' {
		recordfail
		load_video
		insmod gzio
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  272a6b19-0e84-4ed9-b0b7-2218b376d8e4
		else
		  search --no-floppy --fs-uuid --set=root 272a6b19-0e84-4ed9-b0b7-2218b376d8e4
		fi
		echo	'Chargement de Linux 3.13.0-109-generic…'
		linux	/boot/vmlinuz-3.13.0-109-generic root=UUID=272a6b19-0e84-4ed9-b0b7-2218b376d8e4 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-3.13.0-109-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  272a6b19-0e84-4ed9-b0b7-2218b376d8e4
	else
	  search --no-floppy --fs-uuid --set=root 272a6b19-0e84-4ed9-b0b7-2218b376d8e4
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  272a6b19-0e84-4ed9-b0b7-2218b376d8e4
	else
	  search --no-floppy --fs-uuid --set=root 272a6b19-0e84-4ed9-b0b7-2218b376d8e4
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=272a6b19-0e84-4ed9-b0b7-2218b376d8e4 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=fc181480-9d9b-4d5d-b456-2c6bb3032dba none            swap    sw              0       0
--------------------------------------------------------------------------------

====================== sda1/boot/extlinux/extlinux.conf: =======================

--------------------------------------------------------------------------------
## /boot/extlinux/extlinux.conf
##
## IMPORTANT WARNING
##
## The configuration of this file is generated automatically.
## Do not edit this file manually, use: extlinux-update


default l0
prompt 1
timeout 50

include themes/debian/theme.cfg
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 124.138687134 = 133.292900352  boot/grub/grub.cfg                             1
 184.997863770 = 198.639943680  boot/grub/i386-pc/core.img                     1
 227.852535248 = 244.654796800  boot/vmlinuz-3.13.0-109-generic                2
  90.639236450 = 97.323139072   boot/vmlinuz-3.13.0-117-generic                2
  99.786128998 = 107.144540160  boot/vmlinuz-3.13.0-119-generic                2
  99.786128998 = 107.144540160  vmlinuz                                        2
  90.639236450 = 97.323139072   vmlinuz.old                                    2
 182.852535248 = 196.336414720  boot/initrd.img-3.13.0-109-generic             2
  90.882648468 = 97.584500736   boot/initrd.img-3.13.0-117-generic             2
 103.704097748 = 111.351427072  boot/initrd.img-3.13.0-119-generic             3
 103.704097748 = 111.351427072  initrd.img                                     3
  90.882648468 = 97.584500736   initrd.img.old                                 2

================= sda1: Location of files loaded by Syslinux: ==================

           GiB - GB             File                                 Fragment(s)

 186.137840271 = 199.863984128  boot/extlinux/extlinux.conf                    1
 184.782768250 = 198.408986624  boot/extlinux/chain.c32                        1

============== sda1: Version of COM32(R) files used by Syslinux: ===============

 boot/extlinux/chain.c32            :  COM32R module (v4.xx)

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sdb1

00000000  eb 5a 90 2b 6a 30 7c 38  49 48 43 00 02 08 20 00  |.Z.+j0|8IHC... .|
00000010  02 00 00 00 00 f8 00 00  20 00 40 00 40 00 00 00  |........ .@.@...|
00000020  c0 ff ef 00 00 3c 00 00  00 00 00 00 02 00 00 00  |.....<..........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 5f 62 3c 00 44  49 53 4b 5f 49 4d 47 20  |..)_b<.DISK_IMG |
00000050  20 20 46 41 54 33 32 20  20 20 f1 7d fa 33 c9 8e  |  FAT32   .}.3..|
00000060  d1 bc f8 7b 8e c1 bd 78  00 c5 76 00 1e 56 16 55  |...{...x..v..V.U|
00000070  bf 22 05 89 7e 00 89 4e  02 b1 0b fc f3 a4 8e d9  |."..~..N........|
00000080  bd 00 7c c6 45 fe 0f 8b  46 18 88 45 f9 fb 38 66  |..|.E...F..E..8f|
00000090  40 7c 04 cd 13 72 4e bf  02 00 83 7e 16 00 75 71  |@|...rN....~..uq|
000000a0  66 83 7e 24 00 74 6a 8b  46 1c 8b 56 1e b9 03 00  |f.~$.tj.F..V....|
000000b0  49 40 75 01 42 bb 00 7e  e8 90 00 73 2a b0 f8 4f  |I@u.B..~...s*..O|
000000c0  74 21 8b 46 32 33 d2 b9  03 00 3b c8 77 43 8b 76  |t!.F23....;.wC.v|
000000d0  0e 3b ce 73 3c 2b f1 3b  c6 77 36 03 46 1c 13 56  |.;.s<+.;.w6.F..V|
000000e0  1e eb cd 73 2c eb 49 66  81 be 00 02 52 52 61 41  |...s,.If....RRaA|
000000f0  75 cc 66 81 be fc 03 00  00 55 aa 75 c1 66 81 be  |u.f......U.u.f..|
00000100  fc 05 00 00 55 aa 75 b6  83 7e 2a 00 77 03 e9 ef  |....U.u..~*.w...|
00000110  02 be 80 7d fb ac 98 03  f0 ac 84 c0 74 17 3c ff  |...}........t.<.|
00000120  74 09 b4 0e bb 07 00 cd  10 eb ee be 83 7d eb e4  |t............}..|
00000130  be 81 7d eb df 33 c0 cd  16 5e 1f 8f 04 8f 44 02  |..}..3...^....D.|
00000140  cd 19 00 00 00 00 00 00  00 00 00 50 52 51 91 92  |...........PRQ..|
00000150  33 d2 f7 76 18 91 f7 76  18 42 87 ca f7 76 1a 8a  |3..v...v.B...v..|
00000160  f2 8a 56 40 8a e8 d0 cc  d0 cc 0a cc b8 01 02 cd  |..V@............|
00000170  13 59 5a 58 72 09 40 75  01 42 03 5e 0b e2 cc c3  |.YZXr.@u.B.^....|
00000180  03 18 01 27 0d 0a 49 6e  76 61 6c 69 64 20 73 79  |...'..Invalid sy|
00000190  73 74 65 6d 20 64 69 73  6b ff 0d 0a 44 69 73 6b  |stem disk...Disk|
000001a0  20 49 2f 4f 20 65 72 72  6f 72 ff 0d 0a 52 65 70  | I/O error...Rep|
000001b0  6c 61 63 65 20 74 68 65  20 64 69 73 6b 2c 20 61  |lace the disk, a|
000001c0  6e 64 20 74 68 65 6e 20  70 72 65 73 73 20 61 6e  |nd then press an|
000001d0  79 20 6b 65 79 0d 0a 00  49 4f 20 20 20 20 20 20  |y key...IO      |
000001e0  53 59 53 4d 53 44 4f 53  20 20 20 53 59 53 80 01  |SYSMSDOS   SYS..|
000001f0  00 57 49 4e 42 4f 4f 54  20 53 59 53 00 00 55 aa  |.WINBOOT SYS..U.|
00000200



ADDITIONAL INFORMATION :
=================== log of boot-info 2017-06-13__17h42 ===================
boot-info version : 4ppa40
boot-sav version : 4ppa40
glade2script version : 3.2.3~ppa1
boot-sav-extra version : 4ppa40
boot-info is executed in installed-session (Ubuntu 14.04.5 LTS, trusty, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.13.0-119-generic root=UUID=272a6b19-0e84-4ed9-b0b7-2218b376d8e4 ro quiet splash vt.handoff=7
Unmount sdb1 from /media/guy/STORE N GO to avoid space incompatibilities

=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 14.04.5 LTS CurrentSession:linux

=================== blkid:
/dev/sda1: UUID="272a6b19-0e84-4ed9-b0b7-2218b376d8e4" TYPE="ext4"
/dev/sda5: UUID="fc181480-9d9b-4d5d-b456-2c6bb3032dba" TYPE="swap"
/dev/sdb1: LABEL="STORE N GO" UUID="003C-625F" TYPE="vfat"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

Avertissement : la partition étendue ne commence pas sur une frontière de
cylindres. DOS et Linux interpréteront les contenus différemment.

=================== /etc/grub.d/ :
drwxr-xr-x  2 root root      4096 août   4  2016 grub.d
total 76
-rwxr-xr-x 1 root root  9791 déc.  17  2015 00_header
-rwxr-xr-x 1 root root  6058 avril 10  2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 avril 11  2014 10_linux
-rwxr-xr-x 1 root root 10412 avril 11  2014 20_linux_xen
-rwxr-xr-x 1 root root  1992 mars  12  2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 avril 11  2014 30_os-prober
-rwxr-xr-x 1 root root  1418 août   2  2016 30_uefi-firmware
-rwxr-xr-x 1 root root   214 avril 11  2014 40_custom
-rwxr-xr-x 1 root root   216 avril 11  2014 41_custom
-rw-r--r-- 1 root root   483 avril 11  2014 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	.
sdb1	: sdb,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	/mnt/boot-sav/sdb1.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	has-os,	2048 sectors * 512 bytes
sdb	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	usb-disk,	no-os,	64 sectors * 512 bytes


=================== parted -l:

Model: ATA ST320LM001 HN-M3 (scsi)
Disk /dev/sda: 320GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos

Number  Start   End    Size    Type      File system     Flags
1      1049kB  316GB  316GB   primary   ext4            boot
2      316GB   320GB  4183MB  extended
5      316GB   320GB  4183MB  logical   linux-swap(v1)


Model: Verbatim STORE N GO (scsi)
Disk /dev/sdb: 8053MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type     File system  Flags
1      32.8kB  8053MB  8053MB  primary  fat32        boot

=================== parted -lm:

BYT;
/dev/sda:320GB:scsi:512:4096:msdos:ATA ST320LM001 HN-M3;
1:1049kB:316GB:316GB:ext4::boot;
2:316GB:320GB:4183MB:::;
5:316GB:320GB:4183MB:linux-swap(v1)::;

BYT;
/dev/sdb:8053MB:scsi:512:512:msdos:Verbatim STORE N GO;
1:32.8kB:8053MB:8053MB:fat32::boot;

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sda   disk        298,1G
sda1  part ext4   294,2G
sda2  part            1K
sda5  part swap     3,9G
sdb   disk          7,5G
sdb1  part vfat     7,5G STORE N GO
sr0   rom          1024M

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /
sda2     1  0  0
sda5     1  0  0         [SWAP]
sdb      1  0  1 running
sdb1     1  0  1         /mnt/boot-sav/sdb1
sr0      1  0  1 running


=================== mount:
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=guy)
/dev/sdb1 on /mnt/boot-sav/sdb1 type vfat (rw)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control
ls: impossible d'accéder à : Aucun fichier ou dossier de ce type

=================== hexdump -n512 -C /dev/sdb1
00000000  eb 5a 90 2b 6a 30 7c 38  49 48 43 00 02 08 20 00  |.Z.+j0|8IHC... .|
00000010  02 00 00 00 00 f8 00 00  20 00 40 00 40 00 00 00  |........ .@.@...|
00000020  c0 ff ef 00 00 3c 00 00  00 00 00 00 02 00 00 00  |.....<..........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 5f 62 3c 00 44  49 53 4b 5f 49 4d 47 20  |..)_b<.DISK_IMG |
00000050  20 20 46 41 54 33 32 20  20 20 f1 7d fa 33 c9 8e  |  FAT32   .}.3..|
00000060  d1 bc f8 7b 8e c1 bd 78  00 c5 76 00 1e 56 16 55  |...{...x..v..V.U|
00000070  bf 22 05 89 7e 00 89 4e  02 b1 0b fc f3 a4 8e d9  |."..~..N........|
00000080  bd 00 7c c6 45 fe 0f 8b  46 18 88 45 f9 fb 38 66  |..|.E...F..E..8f|
00000090  40 7c 04 cd 13 72 4e bf  02 00 83 7e 16 00 75 71  |@|...rN....~..uq|
000000a0  66 83 7e 24 00 74 6a 8b  46 1c 8b 56 1e b9 03 00  |f.~$.tj.F..V....|
000000b0  49 40 75 01 42 bb 00 7e  e8 90 00 73 2a b0 f8 4f  |I@u.B..~...s*..O|
000000c0  74 21 8b 46 32 33 d2 b9  03 00 3b c8 77 43 8b 76  |t!.F23....;.wC.v|
000000d0  0e 3b ce 73 3c 2b f1 3b  c6 77 36 03 46 1c 13 56  |.;.s<+.;.w6.F..V|
000000e0  1e eb cd 73 2c eb 49 66  81 be 00 02 52 52 61 41  |...s,.If....RRaA|
000000f0  75 cc 66 81 be fc 03 00  00 55 aa 75 c1 66 81 be  |u.f......U.u.f..|
00000100  fc 05 00 00 55 aa 75 b6  83 7e 2a 00 77 03 e9 ef  |....U.u..~*.w...|
00000110  02 be 80 7d fb ac 98 03  f0 ac 84 c0 74 17 3c ff  |...}........t.<.|
00000120  74 09 b4 0e bb 07 00 cd  10 eb ee be 83 7d eb e4  |t............}..|
00000130  be 81 7d eb df 33 c0 cd  16 5e 1f 8f 04 8f 44 02  |..}..3...^....D.|
00000140  cd 19 00 00 00 00 00 00  00 00 00 50 52 51 91 92  |...........PRQ..|
00000150  33 d2 f7 76 18 91 f7 76  18 42 87 ca f7 76 1a 8a  |3..v...v.B...v..|
00000160  f2 8a 56 40 8a e8 d0 cc  d0 cc 0a cc b8 01 02 cd  |..V@............|
00000170  13 59 5a 58 72 09 40 75  01 42 03 5e 0b e2 cc c3  |.YZXr.@u.B.^....|
00000180  03 18 01 27 0d 0a 49 6e  76 61 6c 69 64 20 73 79  |...'..Invalid sy|
00000190  73 74 65 6d 20 64 69 73  6b ff 0d 0a 44 69 73 6b  |stem disk...Disk|
000001a0  20 49 2f 4f 20 65 72 72  6f 72 ff 0d 0a 52 65 70  | I/O error...Rep|
000001b0  6c 61 63 65 20 74 68 65  20 64 69 73 6b 2c 20 61  |lace the disk, a|
000001c0  6e 64 20 74 68 65 6e 20  70 72 65 73 73 20 61 6e  |nd then press an|
000001d0  79 20 6b 65 79 0d 0a 00  49 4f 20 20 20 20 20 20  |y key...IO      |
000001e0  53 59 53 4d 53 44 4f 53  20 20 20 53 59 53 80 01  |SYSMSDOS   SYS..|
000001f0  00 57 49 4e 42 4f 4f 54  20 53 59 53 00 00 55 aa  |.WINBOOT SYS..U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.9G   12K  1.9G   1% /dev
tmpfs          tmpfs     385M  1.2M  384M   1% /run
/dev/sda1      ext4      290G  170G  105G  62% /
none           tmpfs     4.0K     0  4.0K   0% /sys/fs/cgroup
none           tmpfs     5.0M     0  5.0M   0% /run/lock
none           tmpfs     1.9G  212K  1.9G   1% /run/shm
none           tmpfs     100M   36K  100M   1% /run/user
/dev/sdb1      vfat      7.5G  4.8G  2.8G  64% /mnt/boot-sav/sdb1

=================== fdisk -l:

Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x000b3328

Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048   616970239   308484096   83  Linux
/dev/sda2       616972286   625141759     4084737    5  Extended
Partition 2 does not start on physical sector boundary.
/dev/sda5       616972288   625141759     4084736   82  Linux swap / Solaris

Disk /dev/sdb: 8053 MB, 8053063680 bytes
2 heads, 63 sectors/track, 124830 cylinders, total 15728640 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x003c625f

Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *          64    15728639     7864288    b  W95 FAT32




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBRs of all disks (except USB without OS).
Grub-efi would not be selected by default because: no-win-efi
Additional repair would be performed: unhide-bootmenu-10s


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (320GB) !

Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04.5 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.

Moi je ne vois pas dans ce Boot-Info ce qui pourrait empêcher d'écrire dans cette clé USB. Je pense simplement qu'il faut que tu te donnes pouvoir d'administration pour écrire dessus.
Tu peux procéder comme suit :
1) si ta clé USB n'est pas montée automatiquement, tu peux utiliser l'utilitaire de disque pour la monter : https://doc.ubuntu-fr.org/gnome-disk-utility (tu noteras dans ta tête - ou bien sur un bout de papier si tu n'en as pas - le point de montage qui est indiqué dans le champ "En service Oui, monté sur ......")
2) si gksu n'est pas déjà installé, tu l'installes afin de pouvoir utiliser gksudo : https://forum.ubuntu-fr.org/viewtopic.p … #p19459481
3) tu ouvres le gestionnaire de fichiers (Nautilus) avec pouvoir d'administration en passant cette commande dans un terminal :

gksudo nautilus 

Dans le gestionnaire de fichiers qui s'est ouvert, tu peux naviguer jusqu'au point de montage de ta clé USB et tu verras que tu pourras écrire dedans.

Dernière modification par malbo (Le 13/06/2017, à 17:07)

Hors ligne

#5 Le 13/06/2017, à 17:05

gycath

Re : ecriture sur cle USB impossible [RESOLU]

informations complémentaires:
Depuis le Boot-Info les fichiers ont un cadenas mais sont accessibles en lecture
lorsque je dépose un fichier sur la clé, j'ai ce retour:
" Erreur lors de la copie vers STORE N GO
la destination est en lecture seule "

Hors ligne

#6 Le 13/06/2017, à 17:06

malbo

Re : ecriture sur cle USB impossible [RESOLU]

Je viens de poster (post #4). On s'est croisé...

Hors ligne

#7 Le 13/06/2017, à 17:12

moko138

Re : ecriture sur cle USB impossible [RESOLU]

Je voudrais voir ce que dit dmesg. Pour cela,
débranche d'abord toutes tes clefs usb et DDE usb.
puis donne

dmesg |tail -1

puis branche une clef usb,
attends 20 secondes
donne

dmesg | grep -Evi " 80211|ipv6|network" | tail -20

et

mount|tail -3

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#8 Le 13/06/2017, à 17:24

gycath

Re : ecriture sur cle USB impossible [RESOLU]

j'ai lancé "disques"
j'ai sélectionné le périphérique en question mais pas vu:  "En service Oui, monté sur ......"
de toute façon elle se monte et le point de montage indiqué sur l’icône est media/guy/STORE N GO
mais toujours impossible de déposer un doc dedans

Hors ligne

#9 Le 13/06/2017, à 17:28

gycath

Re : ecriture sur cle USB impossible [RESOLU]

Bonjour moko138

guy@guyBarLapRaitea:~$ dmesg |tail -1
[ 3190.745316] usb 3-2: USB disconnect, device number 3
guy@guyBarLapRaitea:~$ dmesg | grep -Evi " 80211|ipv6|network" | tail -20
[ 3234.728078] usb 3-2: SerialNumber: 1312031403490394818706
[ 3234.728368] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 3234.729215] scsi7 : usb-storage 3-2:1.0
[ 3235.727586] scsi 7:0:0:0: Direct-Access     Verbatim STORE N GO       5.00 PQ: 0 ANSI: 2
[ 3235.729809] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 3235.733291] sd 7:0:0:0: [sdb] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
[ 3235.733406] sd 7:0:0:0: [sdb] Write Protect is off
[ 3235.733410] sd 7:0:0:0: [sdb] Mode Sense: 0b 00 00 08
[ 3235.733526] sd 7:0:0:0: [sdb] No Caching mode page found
[ 3235.733530] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 3235.738236] sd 7:0:0:0: [sdb] No Caching mode page found
[ 3235.738243] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 3235.738763]  sdb: sdb1
[ 3235.740621] sd 7:0:0:0: [sdb] No Caching mode page found
[ 3235.740626] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 3235.740629] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 3235.968492] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 3236.028578] FAT-fs (sdb1): error, fat_get_cluster: invalid cluster chain (i_pos 0)
[ 3236.028583] FAT-fs (sdb1): Filesystem has been set read-only
[ 3236.029414] FAT-fs (sdb1): error, fat_get_cluster: invalid cluster chain (i_pos 0)
guy@guyBarLapRaitea:~$ mount|tail -3
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=guy)
/dev/sdb1 on /media/guy/STORE N GO type vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,flush,uhelper=udisks2)
guy@guyBarLapRaitea:

Hors ligne

#10 Le 13/06/2017, à 18:07

erresse

Re : ecriture sur cle USB impossible [RESOLU]

Hello !
On dirait bien que moko a eu le nez creux...
Le log indique clairement que le volume est monté en lecture seule, suite à un "démontage à l'arrache" qui a corrompu les données !
Il ne faut jamais oublier de démonter ou éjecter le volume avant de retirer physiquement la clé du port USB, et c'est aussi bien valable sous Linux que sous Windows.


Plus de 50 ans d'informatique, ça en fait des lignes de commandes en console, mais on n'avait pas le choix...
Excellente raison pour, aujourd'hui qu'on le peut, utiliser au maximum les INTERFACES GRAPHIQUES !
Important : Une fois résolu, pensez à clore votre sujet en ajoutant [Résolu] devant le titre du 1er message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Hors ligne

#11 Le 13/06/2017, à 18:17

moko138

Re : ecriture sur cle USB impossible [RESOLU]

[ 3235.968492] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt

en conséquence de quoi :

[ 3236.028583] FAT-fs (sdb1): Filesystem has been set read-only

Comme c'est un système de fichiers windows, je déconseille formellement le fsck (détails là : Maintenance des supports...) .

Le plus sain : branche ta clef à un windows quelconque,
clic droit sur ta clef > propriétés > vérifier.
Ensuite, et toujours, "Éjecter en toute sécurité".


Et sur ton windows, désactive le démarrage rapide. Ça évitera que les périphériques branchés à l'extinction (et l'éventuelle partition partagée avec Linux) se retrouvent tous dans le même état.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#12 Le 14/06/2017, à 03:49

gycath

Re : ecriture sur cle USB impossible [RESOLU]

ok moko138, ta solution proposée via un windows a gommé le problème d'écriture! En principe je fais attention car je sais qu'il y a des risques suite à un arrachage, mais là j'ai dû outre passer ce réflexe!
Merci à vous tous pour votre aide et vos interventions riches à mon apprentissage.
Bonne journée

Hors ligne

#13 Le 14/06/2017, à 05:26

moko138

Re : ecriture sur cle USB impossible [RESOLU]

smile


/!\ Notons tous que l'info délivrée par mount est - ici et couramment - incorrecte :

mount|tail -3
/dev/sdb1 on /media/guy/STORE N GO type vfat (rw,

alors que dmesg signale correctement :

[ 3236.028583] FAT-fs (sdb1): Filesystem has been set read-only


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#14 Le 14/06/2017, à 09:23

erresse

Re : ecriture sur cle USB impossible [RESOLU]

@moko138: Je pense que l'information fournie par "mount" est consécutive à la commande de montage et aux options qui y sont indiquées, alors que le log reflète, lui, la situation effective du volume en fonction de ce que le système a fait pour le monter, d'où la différence...
Ce n'est pas ton avis ?


Plus de 50 ans d'informatique, ça en fait des lignes de commandes en console, mais on n'avait pas le choix...
Excellente raison pour, aujourd'hui qu'on le peut, utiliser au maximum les INTERFACES GRAPHIQUES !
Important : Une fois résolu, pensez à clore votre sujet en ajoutant [Résolu] devant le titre du 1er message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Hors ligne

#15 Le 14/06/2017, à 10:06

moko138

Re : ecriture sur cle USB impossible [RESOLU]

Justement, je ne sais pas. J'ai re-parcouru man mount en vain.

D'autre part, tu postules une commande de montage.
Mais je suppose que gycath, comme 99,9% des utilisateurs, a laissé en auto (dans les préférences du gestionnaire de fichiers) le montage des périphériques amovibles à l'insertion.
Cette commande est en fait un automatisme constant.
Or on lit aussi des cas où mount retourne "ro".
Donc il ne me semble pas qu'on puisse dire

l'information fournie par "mount" est consécutive à la commande de montage et aux options qui y sont indiquées

Quant à dmesg il logue des actions et réactions, "effectives" comme tu le dis, du système.

C'est pourquoi,
- je me demande pourquoi le système ne met pas "mount" en cohérence avec dmesg.
- et en attendant je le note.


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#16 Le 14/06/2017, à 10:15

malbo

Re : ecriture sur cle USB impossible [RESOLU]

gycath,
Si le problème se reproduit, n'hésite pas à rouvrir cette discussion. Il est possible que le mauvais démontage de la partition sdb1 ne soit pas dû à un arrachage imprudent de ta clé USB mais à une autre cause.

Dernière modification par malbo (Le 14/06/2017, à 10:16)

Hors ligne