Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 01/08/2017, à 12:05

sekane

[résolu]Probléme de détection d'imprimante (epson stylus dx4050)

Bonjour la communauté,
je viens de passer deux jours sur le forum pour trouver une solution à mon problème. Et je suis encore plus perdu.
alors pour être claire voilà mon problème :
1 mon imprimante était reconnu sur mon pc
2 j'ai fait buggé mon pc en voulant bouger la partition de windows et ubuntu 16.04
3 j'ai réinstallé ubuntu
4 mon imprimante n'est plus reconnue

Quand je lance "imprimante" voilà ce que j'ai :
screenshoot1

Et si je cherche à me connecter voilà le gadin :
screenshoot2

Ainsi donc, je ne peux ma connecter à mon localhost:631 ===>
scrennshoot3

J'ai bien lbs d'installer et espcr (printer-driver-escpr) que j'ai installé, desinstallé et re-installé.

Bizarrerie (enfin pour moi!!) : j'ai trouvé le programme de jauge des cartouches et nettoyage des buses qui fonctionne ( epson-printer-utility trouver dans : /opt/epson-printer-utility/bin)
Bizarrerie 2 : dans synaptic quand j'ai voulu desinstaller espcr il a dégagé aussi google-earth qui buggé à mort
Bizarrerie 3 ( mais je sais pas si c'est en lien) : quand je recharge synaptic j'obtiens ça :
screenshoot4

J'ai essayé d'être le plus précis possible, et je tiens à  remercier d'avance  ceux qui vont venir à mon aide!
Cordialement,
Sekane

Dernière modification par sekane (Le 02/08/2017, à 17:33)

Hors ligne

#2 Le 02/08/2017, à 15:20

sylvain3800

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

Bonjour sekane,

d’après ce que tu dis et d’après tes screen il y a un problème avec cups(ou l'acces a localhost:631) et / ou avec tes mise a niveau (sources.list ?).
pour donner encore plus d'infos, peut tu ouvrir un terminal y copier coller les commandes suivante et en  donner le retour entre balise code dans ton prochain message

cat /etc/*release 
uname -a
sudo apt-get update
sudo apt-get upgrade
cat /etc/apt/sources.list
ls /etc/apt/sources.list.d/
dpkg -l | grep cups
dpkg -l | grep epson
cat /etc/cups/cupsd.conf
lpstat-t
sudo cat /var/log/cups/error_log

ça nous permettra sûrement de voir ou ça coince.


Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Hors ligne

#3 Le 02/08/2017, à 16:09

sekane

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

Bonjour sylvain3800, (je suis passé par un post perso ayant suivis et utilisé ton programme pour les problèmes avec epson d'un topic que tu disais être obsolète en 2017:) )

Alors voilà le bordel smile
cat /etc/*release ==>

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.2 LTS"
NAME="Ubuntu"
VERSION="16.04.2 LTS (Xenial Xerus)"
ID=ubuntu
ID_LIKE=debian
PRETTY_NAME="Ubuntu 16.04.2 LTS"
VERSION_ID="16.04"
HOME_URL="http://www.ubuntu.com/"
SUPPORT_URL="http://help.ubuntu.com/"
BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/"
VERSION_CODENAME=xenial
UBUNTU_CODENAME=xenial

uname -a ==>

Linux pepite 4.4.0-87-generic #110-Ubuntu SMP Tue Jul 18 12:55:35 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux

sudo apt-get update ==>

Atteint:1 http://fr.archive.ubuntu.com/ubuntu xenial InRelease
Atteint:2 http://archive.canonical.com/ubuntu xenial InRelease                 
Réception de:3 http://security.ubuntu.com/ubuntu xenial-security InRelease [102 kB]
Atteint:4 http://ppa.launchpad.net/diesch/testing/ubuntu xenial InRelease      
Réception de:5 http://fr.archive.ubuntu.com/ubuntu xenial-updates InRelease [102 kB]
Ign:6 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial InRelease             
Atteint:7 http://ppa.launchpad.net/otto-kesselgulasch/gimp-edge/ubuntu xenial InRelease
Atteint:8 http://ppa.launchpad.net/otto-kesselgulasch/gimp/ubuntu xenial InRelease
Atteint:9 http://ppa.launchpad.net/webupd8team/sublime-text-3/ubuntu xenial InRelease
Réception de:10 http://fr.archive.ubuntu.com/ubuntu xenial-backports InRelease [102 kB]
Ign:11 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial Release              
Ign:12 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main amd64 Packages  
Ign:13 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main i386 Packages   
Réception de:14 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages [593 kB]
Ign:15 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main all Packages    
Réception de:16 http://security.ubuntu.com/ubuntu xenial-security/main amd64 Packages [316 kB]
Ign:17 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main Translation-fr_FR
Ign:18 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main Translation-fr  
Ign:19 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main Translation-en
Ign:20 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main amd64 DEP-11 Metadata
Ign:21 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main DEP-11 64x64 Icons
Ign:12 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main amd64 Packages
Ign:13 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main i386 Packages
Ign:15 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main all Packages
Ign:17 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main Translation-fr_FR
Ign:18 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main Translation-fr
Ign:19 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main Translation-en
Ign:20 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main amd64 DEP-11 Metadata
Réception de:22 http://security.ubuntu.com/ubuntu xenial-security/main i386 Packages [298 kB]
Ign:21 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main DEP-11 64x64 Icons
Ign:12 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main amd64 Packages  
Ign:13 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main i386 Packages
Ign:15 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main all Packages
Ign:17 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main Translation-fr_FR
Ign:18 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main Translation-fr
Réception de:23 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main i386 Packages [573 kB]
Ign:19 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main Translation-en  
Ign:20 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main amd64 DEP-11 Metadata
Ign:21 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main DEP-11 64x64 Icons
Ign:12 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main amd64 Packages
Réception de:24 http://security.ubuntu.com/ubuntu xenial-security/main amd64 DEP-11 Metadata [59,3 kB]
Ign:13 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main i386 Packages   
Ign:15 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main all Packages    
Réception de:25 http://security.ubuntu.com/ubuntu xenial-security/main DEP-11 64x64 Icons [49,6 kB]
Ign:17 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main Translation-fr_FR
Ign:18 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main Translation-fr  
Réception de:26 http://security.ubuntu.com/ubuntu xenial-security/universe amd64 Packages [149 kB]
Ign:19 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main Translation-en  
Ign:20 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main amd64 DEP-11 Metadata
Ign:21 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main DEP-11 64x64 Icons
Ign:12 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main amd64 Packages
Ign:13 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main i386 Packages
Réception de:27 http://security.ubuntu.com/ubuntu xenial-security/universe i386 Packages [133 kB]
Ign:15 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main all Packages    
Ign:17 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main Translation-fr_FR
Ign:18 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main Translation-fr  
Réception de:28 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main amd64 DEP-11 Metadata [304 kB]
Réception de:29 http://security.ubuntu.com/ubuntu xenial-security/universe amd64 DEP-11 Metadata [40,6 kB]
Ign:19 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main Translation-en  
Ign:20 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main amd64 DEP-11 Metadata
Réception de:30 http://security.ubuntu.com/ubuntu xenial-security/universe DEP-11 64x64 Icons [56,2 kB]
Ign:21 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main DEP-11 64x64 Icons
Err:12 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main amd64 Packages  
  404  Not Found
Ign:13 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main i386 Packages   
Ign:15 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main all Packages    
Ign:17 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main Translation-fr_FR
Réception de:31 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main DEP-11 64x64 Icons [205 kB]
Ign:18 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main Translation-fr  
Ign:19 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main Translation-en  
Ign:20 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main amd64 DEP-11 Metadata
Ign:21 http://ppa.launchpad.net/myunity/ppa/ubuntu xenial/main DEP-11 64x64 Icons
Réception de:32 http://fr.archive.ubuntu.com/ubuntu xenial-updates/universe amd64 Packages [511 kB]
Réception de:33 http://fr.archive.ubuntu.com/ubuntu xenial-updates/universe i386 Packages [494 kB]
Réception de:34 http://fr.archive.ubuntu.com/ubuntu xenial-updates/universe Translation-en [199 kB]
Réception de:35 http://fr.archive.ubuntu.com/ubuntu xenial-updates/universe amd64 DEP-11 Metadata [163 kB]
Réception de:36 http://fr.archive.ubuntu.com/ubuntu xenial-updates/universe DEP-11 64x64 Icons [212 kB]
Réception de:37 http://fr.archive.ubuntu.com/ubuntu xenial-updates/multiverse amd64 DEP-11 Metadata [5 888 B]
Réception de:38 http://fr.archive.ubuntu.com/ubuntu xenial-backports/main amd64 DEP-11 Metadata [3 324 B]
Réception de:39 http://fr.archive.ubuntu.com/ubuntu xenial-backports/universe amd64 DEP-11 Metadata [4 688 B]
Réception de:40 http://fr.archive.ubuntu.com/ubuntu xenial-backports/universe DEP-11 64x64 Icons [2 717 B]
4 678 ko réceptionnés en 11s (419 ko/s)                                        
Lecture des listes de paquets... Fait
W: The repository 'http://ppa.launchpad.net/myunity/ppa/ubuntu xenial Release' does not have a Release file.
N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.
N: See apt-secure(8) manpage for repository creation and user configuration details.
E: Impossible de récupérer http://ppa.launchpad.net/myunity/ppa/ubuntu/dists/xenial/main/binary-amd64/Packages  404  Not Found
E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.

sudo apt-get upgrade ==>

Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Calcul de la mise à jour... Fait
Les paquets suivants ont été installés automatiquement et ne sont plus nécessaires :
  alien at debugedit gcc-5-base:i386 libbsd0:i386 libcurl3:i386
  libdrm-amdgpu1:i386 libdrm-intel1:i386 libdrm-nouveau2:i386
  libdrm-radeon1:i386 libdrm2:i386 libedit2:i386 libelf1:i386 libexpat1:i386
  libfontconfig1:i386 libfreeimage3 libfreetype6:i386 libglapi-mesa:i386
  libgssapi-krb5-2:i386 libice6:i386 libjxr0 libk5crypto3:i386
  libkeyutils1:i386 libkrb5-3:i386 libkrb5support0:i386 libllvm3.8
  libllvm3.8:i386 libllvm4.0:i386 libopenjp2-7 libpciaccess0:i386
  libpng12-0:i386 librpmbuild3 librpmsign3 librtmp1:i386 libsigsegv2
  libsm6:i386 libstdc++6:i386 libtxc-dxtn-s2tc0:i386 libwebpmux1 libx11-6:i386
  libx11-xcb1:i386 libxau6:i386 libxcb-dri2-0:i386 libxcb-dri3-0:i386
  libxcb-glx0:i386 libxcb-present0:i386 libxcb-sync1:i386 libxcb1:i386
  libxdamage1:i386 libxdmcp6:i386 libxext6:i386 libxfixes3:i386
  libxrender1:i386 libxshmfence1:i386 libxt6:i386 libxxf86vm1:i386
  linux-headers-4.4.0-31 linux-headers-4.4.0-31-generic
  linux-image-4.4.0-31-generic linux-image-extra-4.4.0-31-generic lsb-core
  lsb-security m4 ncurses-term pax rpm
Veuillez utiliser « sudo apt autoremove » pour les supprimer.
Les paquets suivants seront mis à jour :
  base-files gir1.2-javascriptcoregtk-4.0 gir1.2-webkit2-4.0
  libjavascriptcoregtk-4.0-18 libwebkit2gtk-4.0-37 libwebkit2gtk-4.0-37-gtk2
  unattended-upgrades
7 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 23,4 Mo dans les archives.
Après cette opération, 20,5 ko d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [O/n] o
Réception de:1 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main amd64 base-files amd64 9.4ubuntu4.5 [68,4 kB]
Réception de:2 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main amd64 libwebkit2gtk-4.0-37-gtk2 amd64 2.16.6-0ubuntu0.16.04.1 [8 662 kB]
Réception de:3 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main amd64 libwebkit2gtk-4.0-37 amd64 2.16.6-0ubuntu0.16.04.1 [10,6 MB]
Réception de:4 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main amd64 libjavascriptcoregtk-4.0-18 amd64 2.16.6-0ubuntu0.16.04.1 [3 950 kB]
Réception de:5 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main amd64 gir1.2-webkit2-4.0 amd64 2.16.6-0ubuntu0.16.04.1 [67,3 kB]
Réception de:6 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main amd64 gir1.2-javascriptcoregtk-4.0 amd64 2.16.6-0ubuntu0.16.04.1 [21,2 kB]
Réception de:7 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main amd64 unattended-upgrades all 0.90ubuntu0.7 [32,7 kB]
23,4 Mo réceptionnés en 54s (432 ko/s)                                         
Préconfiguration des paquets...
(Lecture de la base de données... 250394 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../base-files_9.4ubuntu4.5_amd64.deb ...
Dépaquetage de base-files (9.4ubuntu4.5) sur (9.4ubuntu4.4) ...
Traitement des actions différées (« triggers ») pour man-db (2.7.5-1) ...
Traitement des actions différées (« triggers ») pour install-info (6.1.0.dfsg.1-5) ...
Traitement des actions différées (« triggers ») pour cracklib-runtime (2.9.2-1build2) ...
Traitement des actions différées (« triggers ») pour plymouth-theme-ubuntu-text (0.9.2-3ubuntu13.1) ...
update-initramfs: deferring update (trigger activated)
Traitement des actions différées (« triggers ») pour initramfs-tools (0.122ubuntu8.8) ...
update-initramfs: Generating /boot/initrd.img-4.4.0-87-generic
Paramétrage de base-files (9.4ubuntu4.5) ...
Installation de la nouvelle version du fichier de configuration /etc/issue ...
Installation de la nouvelle version du fichier de configuration /etc/issue.net ...
Installation de la nouvelle version du fichier de configuration /etc/lsb-release ...
Traitement des actions différées (« triggers ») pour plymouth-theme-ubuntu-text (0.9.2-3ubuntu13.1) ...
update-initramfs: deferring update (trigger activated)
Traitement des actions différées (« triggers ») pour initramfs-tools (0.122ubuntu8.8) ...
update-initramfs: Generating /boot/initrd.img-4.4.0-87-generic
(Lecture de la base de données... 250394 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../libwebkit2gtk-4.0-37-gtk2_2.16.6-0ubuntu0.16.04.1_amd64.deb ...
Dépaquetage de libwebkit2gtk-4.0-37-gtk2:amd64 (2.16.6-0ubuntu0.16.04.1) sur (2.16.3-0ubuntu0.16.04.1) ...
Préparation du dépaquetage de .../libwebkit2gtk-4.0-37_2.16.6-0ubuntu0.16.04.1_amd64.deb ...
Dépaquetage de libwebkit2gtk-4.0-37:amd64 (2.16.6-0ubuntu0.16.04.1) sur (2.16.3-0ubuntu0.16.04.1) ...
Préparation du dépaquetage de .../libjavascriptcoregtk-4.0-18_2.16.6-0ubuntu0.16.04.1_amd64.deb ...
Dépaquetage de libjavascriptcoregtk-4.0-18:amd64 (2.16.6-0ubuntu0.16.04.1) sur (2.16.3-0ubuntu0.16.04.1) ...
Préparation du dépaquetage de .../gir1.2-webkit2-4.0_2.16.6-0ubuntu0.16.04.1_amd64.deb ...
Dépaquetage de gir1.2-webkit2-4.0:amd64 (2.16.6-0ubuntu0.16.04.1) sur (2.16.3-0ubuntu0.16.04.1) ...
Préparation du dépaquetage de .../gir1.2-javascriptcoregtk-4.0_2.16.6-0ubuntu0.16.04.1_amd64.deb ...
Dépaquetage de gir1.2-javascriptcoregtk-4.0:amd64 (2.16.6-0ubuntu0.16.04.1) sur (2.16.3-0ubuntu0.16.04.1) ...
Préparation du dépaquetage de .../unattended-upgrades_0.90ubuntu0.7_all.deb ...
Dépaquetage de unattended-upgrades (0.90ubuntu0.7) sur (0.90ubuntu0.6) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.23-0ubuntu9) ...
Traitement des actions différées (« triggers ») pour systemd (229-4ubuntu19) ...
Traitement des actions différées (« triggers ») pour ureadahead (0.100.0-19) ...
ureadahead will be reprofiled on next reboot
Traitement des actions différées (« triggers ») pour man-db (2.7.5-1) ...
Paramétrage de libjavascriptcoregtk-4.0-18:amd64 (2.16.6-0ubuntu0.16.04.1) ...
Paramétrage de libwebkit2gtk-4.0-37:amd64 (2.16.6-0ubuntu0.16.04.1) ...
Paramétrage de libwebkit2gtk-4.0-37-gtk2:amd64 (2.16.6-0ubuntu0.16.04.1) ...
Paramétrage de gir1.2-javascriptcoregtk-4.0:amd64 (2.16.6-0ubuntu0.16.04.1) ...
Paramétrage de gir1.2-webkit2-4.0:amd64 (2.16.6-0ubuntu0.16.04.1) ...
Paramétrage de unattended-upgrades (0.90ubuntu0.7) ...
Traitement des actions différées (« triggers ») pour libc-bin (2.23-0ubuntu9) ...

cat /etc/apt/sources.list ==>

# deb cdrom:[Ubuntu 16.04.1 LTS _Xenial Xerus_ - Release amd64 (20160719)]/ xenial main restricted

# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted
# deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted

## Major bug fix updates produced after the final release of the
## distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates main restricted
# deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial-updates main restricted

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team, and may not be under a free licence. Please satisfy yourself as to
## your rights to use the software. Also, please note that software in
## universe WILL NOT receive any review or updates from the Ubuntu security
## team.
deb http://fr.archive.ubuntu.com/ubuntu/ xenial universe
# deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial universe
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates universe
# deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial-updates universe

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu 
## team, and may not be under a free licence. Please satisfy yourself as to 
## your rights to use the software. Also, please note that software in 
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://fr.archive.ubuntu.com/ubuntu/ xenial multiverse
# deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates multiverse
# deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial-updates multiverse

## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
# deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse

## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
deb http://archive.canonical.com/ubuntu xenial partner
deb-src http://archive.canonical.com/ubuntu xenial partner

deb http://security.ubuntu.com/ubuntu xenial-security main restricted
# deb-src http://security.ubuntu.com/ubuntu xenial-security main restricted
deb http://security.ubuntu.com/ubuntu xenial-security universe
# deb-src http://security.ubuntu.com/ubuntu xenial-security universe
deb http://security.ubuntu.com/ubuntu xenial-security multiverse
# deb-src http://security.ubuntu.com/ubuntu xenial-security multiverse

ls /etc/apt/sources.list.d/ ==>

diesch-ubuntu-testing-xenial.list
diesch-ubuntu-testing-xenial.list.save
myunity-ubuntu-ppa-xenial.list
otto-kesselgulasch-ubuntu-gimp-edge-xenial.list
otto-kesselgulasch-ubuntu-gimp-edge-xenial.list.save
otto-kesselgulasch-ubuntu-gimp-xenial.list
otto-kesselgulasch-ubuntu-gimp-xenial.list.save
webupd8team-ubuntu-sublime-text-3-xenial.list
webupd8team-ubuntu-sublime-text-3-xenial.list.save

dpkg -l | grep cups ==>

rc  cups                                        2.1.3-4                                    amd64        Common UNIX Printing System(tm) - PPD/driver support, web interface
rc  cups-browsed                                1.8.3-2ubuntu3.1                           amd64        OpenPrinting CUPS Filters - cups-browsed
ii  cups-bsd                                    2.1.3-4                                    amd64        Common UNIX Printing System(tm) - BSD commands
ii  cups-client                                 2.1.3-4                                    amd64        Common UNIX Printing System(tm) - client programs (SysV)
ii  cups-common                                 2.1.3-4                                    all          Common UNIX Printing System(tm) - common files
rc  cups-core-drivers                           2.1.3-4                                    amd64        Common UNIX Printing System(tm) - PPD-less printing
rc  cups-daemon                                 2.1.3-4                                    amd64        Common UNIX Printing System(tm) - daemon
rc  cups-filters                                1.8.3-2ubuntu3.1                           amd64        OpenPrinting CUPS Filters - Main Package
ii  cups-pk-helper                              0.2.5-2ubuntu2                             amd64        PolicyKit helper to configure cups with fine-grained privileges
ii  cups-ppdc                                   2.1.3-4                                    amd64        Common UNIX Printing System(tm) - PPD manipulation utilities
ii  libcups2:amd64                              2.1.3-4                                    amd64        Common UNIX Printing System(tm) - Core library
ii  libcupsfilters1:amd64                       1.8.3-2ubuntu3.1                           amd64        OpenPrinting CUPS Filters - Shared library
ii  libcupsimage2:amd64                         2.1.3-4                                    amd64        Common UNIX Printing System(tm) - Raster image library
ii  libcupsppdc1:amd64                          2.1.3-4                                    amd64        Common UNIX Printing System(tm) - PPD manipulation library
ii  python3-cups                                1.9.73-0ubuntu2                            amd64        Python3 bindings for CUPS
ii  python3-cupshelpers                         1.5.7+20160212-0ubuntu2                    all          Python modules for printer configuration with CUPS

dpkg -l | grep epson ==>

ii  epson-printer-utility                       1.0.0-1lsb3.2                              amd64        Epson Printer Utility Driver for Linux

cat /etc/cups/cupsd.conf ==>

#
# Configuration file for the CUPS scheduler.  See "man cupsd.conf" for a
# complete description of this file.
#

# Log general information in error_log - change "warn" to "debug"
# for troubleshooting...
LogLevel warn
PageLogFormat

# Deactivate CUPS' internal logrotating, as we provide a better one, especially
# LogLevel debug2 gets usable now
MaxLogSize 0

# Only listen for connections from the local machine.
Listen localhost:631
Listen /var/run/cups/cups.sock

# Show shared printers on the local network.
Browsing Off
BrowseLocalProtocols dnssd

# Default authentication type, when authentication is required...
DefaultAuthType Basic

# Web interface setting...
WebInterface Yes

# Restrict access to the server...
<Location />
  Order allow,deny
</Location>

# Restrict access to the admin pages...
<Location /admin>
  Order allow,deny
</Location>

# Restrict access to configuration files...
<Location /admin/conf>
  AuthType Default
  Require user @SYSTEM
  Order allow,deny
</Location>

# Restrict access to log files...
<Location /admin/log>
  AuthType Default
  Require user @SYSTEM
  Order allow,deny
</Location>

# Set the default printer/job policies...
<Policy default>
  # Job/subscription privacy...
  JobPrivateAccess default
  JobPrivateValues default
  SubscriptionPrivateAccess default
  SubscriptionPrivateValues default

  # Job-related operations must be done by the owner or an administrator...
  <Limit Create-Job Print-Job Print-URI Validate-Job>
    Order deny,allow
  </Limit>

  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>

  # All administration operations require an administrator to authenticate...
  <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>

  # All printer operations require a printer operator to authenticate...
  <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>

  # Only the owner or an administrator can cancel or authenticate a job...
  <Limit Cancel-Job CUPS-Authenticate-Job>
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>

  <Limit All>
    Order deny,allow
  </Limit>
</Policy>

# Set the authenticated printer/job policies...
<Policy authenticated>
  # Job/subscription privacy...
  JobPrivateAccess default
  JobPrivateValues default
  SubscriptionPrivateAccess default
  SubscriptionPrivateValues default

  # Job-related operations must be done by the owner or an administrator...
  <Limit Create-Job Print-Job Print-URI Validate-Job>
    AuthType Default
    Order deny,allow
  </Limit>

  <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document>
    AuthType Default
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>

  # All administration operations require an administrator to authenticate...
  <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>

  # All printer operations require a printer operator to authenticate...
  <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs>
    AuthType Default
    Require user @SYSTEM
    Order deny,allow
  </Limit>

  # Only the owner or an administrator can cancel or authenticate a job...
  <Limit Cancel-Job CUPS-Authenticate-Job>
    AuthType Default
    Require user @OWNER @SYSTEM
    Order deny,allow
  </Limit>

  <Limit All>
    Order deny,allow
  </Limit>
</Policy>

lpstat-t ==>

lpstat-t : commande introuvable

sudo cat /var/log/cups/error_log ==>

rien ne se passe ;( c'est quoi ce bordel!!

Je me sents très honteux de te faire lire tout ça et la noobitude me terrasse quand je lis toutes ces lignes et les commandes que tu m'as demandé..;(

Bizarrerie ( depuis ce matin): je n'arrive plus à avoir mon localhost/projet/index.php de lampp ( je suis une formation de html5, css, python et php sur youtube) encore un truc qui me mets plus bas que terre, c'est décourageant sad

En tout cas je te remercie infiniment de prendre de ton temps pour m'aider!!

Hors ligne

#4 Le 02/08/2017, à 16:42

sylvain3800

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

je vois 2 trucs :

rc cups                                        2.1.3-4                                    amd64        Common UNIX Printing System(tm) - PPD/driver support, web interface
rc  cups-browsed                                1.8.3-2ubuntu3.1                           amd64        OpenPrinting CUPS Filters - cups-browsed

ce qui veut dire que ton fichier cups a été supprimé mais pas purgé et que donc il reste des fichier de configuration
et c'est pour ca (comme il a ete supprimé ) que tu ne peux pas accéder a cups
donc il va falloir réinstaller cups .
masi avant je vois aussi ceci :

W: The repository 'http://ppa.launchpad.net/myunity/ppa/ubuntu xenial Release' does not have a Release file.
N: Data from such a repository can't be authenticated and is therefore potentially dangerous to use.
N: See apt-secure(8) manpage for repository creation and user configuration details.
E: Impossible de récupérer http://ppa.launchpad.net/myunity/ppa/ub … 4/Packages  404  Not Found
E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.

c'est un ppa que tu a installé sur ton systeme et soit le serveur qui l'heberge est en rade soit ce ppa n'est pas comptaible avec ta version d'ubuntu (tu l'a peut etre installé avec une ancienne version et tu as fait une migration ou que sais-je ...) donc il faut regler ton probleme de ppa en premier lieu pour ce faire tu va rentrer ces commandes :
virer le ppa :

sudo  rm etc/apt/sources.list.d/ myunity-ubuntu-ppa-xenial.list

puis remettre le systeme a jour

sudo apt-get update
sudo apt-get upgrade
sudo apt autoremove

histoire de virer les paquets inutiles
puis on irenstalle cups qui a été supprimé :

sudo apt-get install cups 

puis une fois tout cela fait ... ca devrait beaucoup mieux marcher tongue

sudo cat /var/log/cups/error_log ==>

rien ne se passe ;( c'est quoi ce bordel!!

pas de cups ... donc pas de log d'erreur c'est coool  smile


lpstat-t ==>

lpstat-t : commande introuvable

... là c'est moi qui me suis planté j'ai écris trop vite et j'ai oublié un espace big_smile
la bonne commande aurais été :

lpstat -t

c'est pour ca que le terminal répond commande introuvable.

Bizarrerie (enfin pour moi!!) : j'ai trouvé le programme de jauge des cartouches et nettoyage des buses qui fonctionne ( epson-printer-utility trouver dans : /opt/epson-printer-utility/bin)

Ça ... c'est du à l'utilisation de mon script ... si tu as un scanner tu dois surement pouvoir scanner aussi tongue

Bizarrerie ( depuis ce matin): je n'arrive plus à avoir mon localhost/projet/index.php de lampp ( je suis une formation de html5, css, python et php sur youtube) encore un truc qui me mets plus bas que terre, c'est décourageant sad

là je ne saurais t'aider n'y connaissant strictement rien ... si apres avoir mis ton système a jour tu as encore des problèmes il faudra que tu poste une autre demande d'aide dans une autre partie du forum ....
mais en attendant rentre les commandes listé plus haut ensuite si cela nemarche toujours pas on virera le pilote modifié qui est installé sur ton systeme et ion installera celui generique des depots .
@ ++

Dernière modification par sylvain3800 (Le 02/08/2017, à 17:02)


Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Hors ligne

#5 Le 02/08/2017, à 17:16

sekane

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

merci pour ta réponse aussi rapide!!
alors j'ai taper la commance :
sudo  rm etc/apt/sources.list.d/ myunity-ubuntu-ppa-xenial.list ==>

rm: impossible de supprimer 'etc/apt/sources.list.d/': Aucun fichier ou dossier de ce type
rm: impossible de supprimer 'myunity-ubuntu-ppa-xenial.list': Aucun fichier ou dossier de ce type

donc je suis allé direct dans le dossier pour le dégager en live ( peut être une syntaxe erronée de la commande) et myunity-bla-bla est bien supprimé, cool, bonne nouvelle wink
==> j'ai lancé update upgrade et autoremove, tout ce passe bien pour l'instant smile
==> installation de cups, tout se passe bien !

du coup je te post le lpstat -t ==>

scheduler is running
no system default destination
lpstat: Aucune destination ajoutée.
lpstat: Aucune destination ajoutée.
lpstat: Aucune destination ajoutée.
lpstat: Aucune destination ajoutée.

je pense que je vais reboot! merci encore !

Hors ligne

#6 Le 02/08/2017, à 17:26

sylvain3800

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

( peut être une syntaxe erronée de la commande) et myunity-bla-bla est bien supprimé, cool, bonne nouvelle wink

effectivement j'ai mis un espace ou il ne fallait pas ...


Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Hors ligne

#7 Le 02/08/2017, à 17:29

sylvain3800

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

tiens moi au courrant , il faudra peut être réinstaller ton imprimante si elle n'est ps détecté automatiquement.


Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Hors ligne

#8 Le 02/08/2017, à 17:33

sekane

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

reboot effectué smile imprimante détectée!! merci infiniment tout ça en 5 post, ça tient du génie!!
Bon alors il me reste le scan à mettre en place smile
puis-je repasser ici, si je me retrouve encore avec des soucis?
Je tiens encore à te remercier sylvain3800 smile

Hors ligne

#9 Le 02/08/2017, à 17:37

sylvain3800

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

normalement si  ĺe script s'est deroulé convenablement tu dois pouvoir scanner pour se faire tu as du installer (enfin le script) un programme qui s'appelle image-scan (ou imagescann) sur ton systeme :
cherche le et lance le .
et si tu le trouve pas donne le retour de cette commande :

dpkg -l | grep *scan

Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Hors ligne

#10 Le 02/08/2017, à 17:51

sekane

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

hahahaha effectivement je suis de retour assez rapidement, alors j'ai deux scan un simple scan et un imagescan! for linux. le premier ne se connecte pas à l'imprimante et l'autre ne se lance tout simplement pas sad ps. si il se lance mais il me dit " impossible d'envoyer une commande au scanner. verifier le bla bla"

alors commande dpkg -l | grep *scan ==>

rien ne se passe, voilà encore un problème hahaha

Dernière modification par sekane (Le 02/08/2017, à 17:54)

Hors ligne

#11 Le 02/08/2017, à 18:01

sylvain3800

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

tu n'a donc pas les pilotes du scanner d'installé , malheureusement le site d'epson ne donne pas de pilotes specifique pour ton imprimante masi tu peux dejá essayer d'installer les pilotes generiques d'epson pour ton architecture ca devrais marcher 
ils sont
ici
faudra les extraires et les installer via la logitheque par ex

Dernière modification par sylvain3800 (Le 02/08/2017, à 18:05)


Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Hors ligne

#12 Le 02/08/2017, à 18:12

sylvain3800

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

ha non ...je viens de regarder
il faudra les installer par un script d'installation a lancer depuis le terminal et pour ce faire il faudra que tu navique avec ton terminal avec a commande cd
alors pour faire plus simple :
telecharger :

wget https://download2.ebz.epson.net/iscan/general/deb/x64/iscan-bundle-1.0.0.x64.deb.tar.gz

decompresser

tar -xvf iscan-bundle-1.0.0.x64.deb.tar.gz

lancer le script d'installation :

iscan-bundle-1.0.0.x64.deb/install.sh

et ensuite pour verifier que c'est installés

dpkg -l | grep iscan

Dernière modification par sylvain3800 (Le 02/08/2017, à 18:14)


Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Hors ligne

#13 Le 02/08/2017, à 18:17

sekane

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

alors j'ai suivis le post :
https://forum.ubuntu-fr.org/viewtopic.php?id=1113311
j'ai téléchargé le iscan-bundle-1.0.0.x64.deb.tar-1
je l'ai installé mais rien...
par contre j'ai pas compris cette partie :
<  Pour finir, pensez à modifier le fichier ci-dessous :
Fichier à modifier : /etc/sane.d/epkowa.conf - (avec les droits administrateurs !)
* si la connexion est en USB, ajoutez : usb 0x04b8 0xProductID - (lsusb | grep "04b8" pour détecter et connaître votre MFP)
* si la connexion se fait par réseau, ajoutez : net adr_ip 1865 - ('adr_ip' étant l'adresse ip configurée dans votre MFP)
Le nom du bon pilote est epkowa, et non 'espon' ou 'espon2' ! 
Le logiciel "Image Scan! for Linux" est disponible à partir du menu Graphisme ou Infographie ...   >

# epkowa.conf -- sample configuration for the EPKOWA SANE backend
# Copyright (C) 2004, 2008, 2009  Olaf Meeuwissen
#
# See sane-epkowa(5), sane-usb(5) and sane-scsi(5) for details.

# Detect all devices supported by the backend.
# If you don't have a SCSI device, you can comment out the "scsi"
# keyword.  Similarly for the other keywords.
#
usb
scsi


# For any USB scanner not known to the backend (yet), you may, at your
# own peril(!!), force the backend to recognise and use it via libusb.
# You can do so by the following configuration command:
# 
#   usb <USB vendor ID> <USB product ID>
#
# SEIKO EPSON's USB vendor ID is '0x04b8' (without quotes).  In order
# to find the USB product ID, use lsusb(1).
# A sample configuration for the Epson Perfection 1650 (Epson GT-8200),
# which has a product ID of 0x0110, would look as follows:
#
#usb 0x04b8 0x0110


# For SCSI devices not detected, you can add an entry like:
#
#   scsi EPSON GT-20000
#
# where the GT-20000 bit corresponds to the SCSI model information as
# shown in the output of dmesg(1) or in the /var/log/kern.log file.


# Network attached devices may be made to work by first installing the
# (non-free) iscan-network-nt package and then adding configuration lines
# as per information below.
#
# For each network attached device, you must add an entry as follows:
#
#   net <IP-address|hostname> [port-number]
#
# Ask your network administrator for the device's IP address or check
# for yourself on the panel (if it has one).  The port-number is very
# optional and defaults to 1865.
# Note that network attached devices are not queried unless configured
# in this file.
#
# Examples:
#
#net 192.16.136.2 1865
#net 10.0.0.1
#net scanner.mydomain.com


# Some backend behaviour can be customized by using the option keyword
# followed by an option name, as shown below.
#
#   option <option-name>
#
# Currently available options:
#
# Makes the automatic document feeder the default document source
#option prefer-adf

Peux tu m'expliquer, j'ai bien ouvert epkowa.conf avec gedit mais pour la suite?

Dernière modification par sekane (Le 02/08/2017, à 18:20)

Hors ligne

#14 Le 02/08/2017, à 18:38

sylvain3800

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

Peux tu m'expliquer, j'ai bien ouvert epkowa.conf avec gedit mais pour la suite?

il faut le modifier et pour cela il faut l'ouvrir avec les droits roots sinon tes modifications ne seront pas pris es en compte donc tu l'ouvre comme ceci :

sudo gedit /etc/sane.d/epkowa.conf

# epkowa.conf -- sample configuration for the EPKOWA SANE backend
# Copyright (C) 2004, 2008, 2009  Olaf Meeuwissen
#
# See sane-epkowa(5), sane-usb(5) and sane-scsi(5) for details.

# Detect all devices supported by the backend.
# If you don't have a SCSI device, you can comment out the "scsi"
# keyword.  Similarly for the other keywords.
#
usb
scsi


# For any USB scanner not known to the backend (yet), you may, at your
# own peril(!!), force the backend to recognise and use it via libusb.
# You can do so by the following configuration command:
#
#   usb <USB vendor ID> <USB product ID>
#
# SEIKO EPSON's USB vendor ID is '0x04b8' (without quotes).  In order
# to find the USB product ID, use lsusb(1).
# A sample configuration for the Epson Perfection 1650 (Epson GT-8200),
# which has a product ID of 0x0110, would look as follows:
#
#usb 0x04b8 0x0110

tu repere cette ligne

#usb 0x04b8 0x0110
et tu la remplace par celle correspondant a ton scanner que tu obtiendra par la commande :

lsusb

tu repere les numero qui doivent etre les même mais c'est pas sur en sachant que la partie 0x n'apparait pas et c'est normal
important il faudra virer le signe # en debut de ligne pour que ca soit pris en compte
tu enregistre et tui quitte ensuite normalement en installant iscan cela tr#as modifié les regles udev pour verifier tu lance cette comamnde :

sudo gedit /lib/udev/rules.d/40-libsane.rules

si le document est vide tu l'ecrit toi même :

ATTRS{idVendor}=="04b8", ATTRS{idProduct}=="012d", ENV{libsane_matched}="yes"
# Epson DX4050

avec idvendor et idproduct correspoondant a ce que te donne lsusb
ensuite un petit :

sudo service udev restart

puis le retour de ces commandes :

sane-find-scanner 
sudo sane-find-scanner 
scanimage -l

Dernière modification par sylvain3800 (Le 02/08/2017, à 18:46)


Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Hors ligne

#15 Le 02/08/2017, à 19:06

sekane

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

re sylvain3800
retour de commande :
sane-find-scanner ==>

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not open USB device 0x046d/0xc517 at 002:004: Access denied (insufficient permissions)
could not open USB device 0x045e/0x076c at 002:003: Access denied (insufficient permissions)
could not open USB device 0x8087/0x0024 at 002:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 002:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0003 at 006:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 005:001: Access denied (insufficient permissions)
found USB scanner (vendor=0x04b8 [EPSON], product=0x082f [USB MFP]) at libusb:001:004
could not open USB device 0x8087/0x0024 at 001:002: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 001:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0003 at 004:001: Access denied (insufficient permissions)
could not open USB device 0x1d6b/0x0002 at 003:001: Access denied (insufficient permissions)
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

  # You may want to run this program as root to find all devices. Once you
  # found the scanner devices, be sure to adjust access permissions as
  # necessary.

sudo sane-find-scanner ==>

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
found USB scanner (vendor=0x04b8 [EPSON], product=0x082f [USB MFP]) at libusb:001:004
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.

  # Not checking for parallel port scanners.

  # Most Scanners connected to the parallel port or other proprietary ports
  # can't be detected by this program.

scanimage -l ==>
ça bug le terminal reste bloqué sans retour à la ligne !

Hors ligne

#16 Le 02/08/2017, à 19:10

sylvain3800

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

control + c pourt annuler
une fois que tu as la main  lance cette commande

scanimage -L

je dois etre plsu fatigué que ce que je pensais big_smile
mais ca sent bon pour l'instant
il faudra retenter un scan via simplescan

Dernière modification par sylvain3800 (Le 02/08/2017, à 19:12)


Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Hors ligne

#17 Le 02/08/2017, à 19:13

sekane

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

idem le terminal reste bloqué, faut-il que je reboot pour valider tout ces changements?

Hors ligne

#18 Le 02/08/2017, à 19:15

sylvain3800

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

genre il te rend pas la main ...
oui ben fais un reboot alors pour etre sur et tente de scanner via simplescan vu que sane-find-scanner trouve ton scanner


Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Hors ligne

#19 Le 02/08/2017, à 19:17

sekane

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

bon apres le reboot voilà le reponse du terminal (j'aime bien quand il me parle smile)

device `epkowa:usb:001:003' is a Epson (unknown model) flatbed scanner
device `epkowa:usb:001:003' is a Epson (unknown model) flatbed scanner

je vais tester les deux scans et je te dis si ça bouge smile

Hors ligne

#20 Le 02/08/2017, à 19:20

sylvain3800

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

bon apres le reboot voilà le reponse du terminal (j'aime bien quand il me parle smile)

c'est vrai qu'avoir un terminal bavard c'est toujours mieux big_smile

Dernière modification par sylvain3800 (Le 02/08/2017, à 19:21)


Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Hors ligne

#21 Le 02/08/2017, à 19:22

sekane

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

alors verdict :
simple scan bug :
Capture%20du%202017-08-02%2020-19-31_zpsnozv9q4h.png
et toujours idem pour iscan il se lance pas, l'icone apparaît dans la barre de tache mais disparaît comme s'il etait un peu fénéant!

Hors ligne

#22 Le 02/08/2017, à 19:25

sylvain3800

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

mmmmhhh........
il veux pas .....
et que dit

sudo simple-scan

au vu du principe :
1501698674.jpg
il veut pas non plus ?

il nous laisse un petit message d'erreur dans le terminal?

Dernière modification par sylvain3800 (Le 02/08/2017, à 19:34)


Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Hors ligne

#23 Le 02/08/2017, à 19:33

sekane

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

alors je eu un dialogue avec je sais pas qui :
Capture%20du%202017-08-02%2020-31-01_zps8au5rjul.png
et simplescan ne me dit plus error mais tourne bêtement quand j'ai lance le scan...

et le terminal reste boquer...

Hors ligne

#24 Le 02/08/2017, à 19:40

sylvain3800

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

.... mmmhhh....
il y a un truc que je vois pas ......
control +c pour debloquer le terminal
donne moi le retour de cette commande :

cat /etc/sane.d/dll.conf

et puis le retour de celles-ci pour vérifier :

lsusb
cat /etc/sane.d/epkowa.conf

Cogito ergo sum = je consome donc je suis : je pense, donc je suis !

IN-SHADOW:https://www.youtube.com/watch?v=j800SVeiS5I

Hors ligne

#25 Le 02/08/2017, à 19:44

sekane

Re : [résolu]Probléme de détection d'imprimante (epson stylus dx4050)

alors :

# /etc/sane.d/dll.conf - Configuration file for the SANE dynamic backend loader
#
# Backends can also be enabled by configuration snippets under
# /etc/sane.d/dll.d directory -- packages providing backends should drop
# a config file similar to dll.conf in this directory, named after the package.
#

# The next line enables the network backend; comment it out if you don't need
# to use a remote SANE scanner over the network - see sane-net(5) and saned(8)
net
abaton
agfafocus
apple
avision
artec
artec_eplus48u
as6e
bh
canon
canon630u
canon_dr
#canon_pp
cardscan
coolscan
#coolscan2
coolscan3
#dc25
#dc210
#dc240
dell1600n_net
dmc
epjitsu
#epson
epson2
epsonds
fujitsu
#gphoto2
genesys
gt68xx
hp
hp3900
hpsj5s
hp3500
hp4200
hp5400
hp5590
hpljm1005
hs2p
ibm
kodak
kodakaio
kvs1025
kvs20xx
leo
lexmark
ma1509
magicolor
matsushita
microtek
microtek2
mustek
#mustek_pp
mustek_usb
mustek_usb2
nec
niash
#p5
pie
pixma
plustek
#plustek_pp
#pnm
qcam
ricoh
rts8891
s9036
sceptre
sharp
sm3600
sm3840
snapscan
sp15c
#st400
#stv680
tamarack
teco1
teco2
teco3
#test
u12
umax
#umax_pp
umax1220u
v4l
xerox_mfp

et :

Bus 002 Device 004: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Bus 002 Device 003: ID 045e:076c Microsoft Corp. Comfort Mouse 4500
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 04b8:082f Seiko Epson Corp. PX-A620 [Stylus CX3900/DX4000/DX4050]
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

et le dernier :

# epkowa.conf -- sample configuration for the EPKOWA SANE backend
# Copyright (C) 2004, 2008, 2009  Olaf Meeuwissen
#
# See sane-epkowa(5), sane-usb(5) and sane-scsi(5) for details.

# Detect all devices supported by the backend.
# If you don't have a SCSI device, you can comment out the "scsi"
# keyword.  Similarly for the other keywords.
#
usb
scsi


# For any USB scanner not known to the backend (yet), you may, at your
# own peril(!!), force the backend to recognise and use it via libusb.
# You can do so by the following configuration command:
# 
#   usb <USB vendor ID> <USB product ID>
#
# SEIKO EPSON's USB vendor ID is '0x04b8' (without quotes).  In order
# to find the USB product ID, use lsusb(1).
# A sample configuration for the Epson Perfection 1650 (Epson GT-8200),
# which has a product ID of 0x0110, would look as follows:
#
usb 0x04b8 0x082f


# For SCSI devices not detected, you can add an entry like:
#
#   scsi EPSON GT-20000
#
# where the GT-20000 bit corresponds to the SCSI model information as
# shown in the output of dmesg(1) or in the /var/log/kern.log file.


# Network attached devices may be made to work by first installing the
# (non-free) iscan-network-nt package and then adding configuration lines
# as per information below.
#
# For each network attached device, you must add an entry as follows:
#
#   net <IP-address|hostname> [port-number]
#
# Ask your network administrator for the device's IP address or check
# for yourself on the panel (if it has one).  The port-number is very
# optional and defaults to 1865.
# Note that network attached devices are not queried unless configured
# in this file.
#
# Examples:
#
#net 192.16.136.2 1865
#net 10.0.0.1
#net scanner.mydomain.com


# Some backend behaviour can be customized by using the option keyword
# followed by an option name, as shown below.
#
#   option <option-name>
#
# Currently available options:
#
# Makes the automatic document feeder the default document source
#option prefer-adf

Hors ligne