Ubuntu-fr

Grenatu

Recevoir la tnt avec une clé aver tv ?

Bonjour à tous,

     Je suis un tout nouvel utilisateur d'ubuntu (et autant je me débrouillais plutôt bien sous windows, autant là je suis un peu paumé) : j'ai installé hier soir cette distribution sur un pc qui n'en faisait qu'à sa tête sous windows... des BSOD incorrigibles.
Je compte utiliser ce pc pour des tâches simples, telles que du traitement de texte, ou encore, regarder des vidéos, la télé, etc...

     J'en viens donc à mon problème : je ne sais pas comment m'y prendre pour recevoir la tnt sous ubuntu.
Je dispose d'une clé tnt usb d'avermedia (volar green HD, datant de 2014).. le premier soucis est donc qu'avermedia ne propose pas de version de ses logiciels sous linux.

     J'ai donc entrepris quelques recherches, j'ai regardé de la doc, quelques sujets sur le forum qui parlaient déjà de ce sujet.. mais je n'y ai pas compris grand chose. Dans tous les cas ça parle de ligne de commande à rentrer, mais je ne sais pas vraiment comment ni où

Du coup, si quelqu'un pourrait m'éclaircir sur le sujet, je lui en serais très reconnaissant.

alduc31

Re : Recevoir la tnt avec une clé aver tv ?

Salut,

D'après cette page, cette clé TNT est supportée : https://www.linuxtv.org/wiki/index.php/AVerMedia.
Faut télécharger le firmware indiqué : http://xgazza.altervista.org/Linux/DVB/ … 9035-02.fw. Enregistre le à la racine de ton home pour simplifier.

Ouvre un terminal et exécute la commande (et entre ton mot de passe) :

sudo cp dvb-usb-af9035-02.fw  /lib/firmware/.

Branche ta clé (rebranche là si elle était déjà branchée).
Puis toujours dans le terminal, donne le retour de la commande :

dmesg

Après on verra pour scanner les chaines.

---

Asus UX325EA oled (i5-1135G7,16Go) avec Lunar 23.04 (base xubuntu modifiée)

grandtoubab

Re : Recevoir la tnt avec une clé aver tv ?

si c'est pour regarder la TNT,  par Internet c'est plus facile d'utiliser Molotov

https://www.molotov.tv/download
puis rendre le logiciel exécutable (clic droit et cocher la case "autoriser l'éxécution du fichier comme un programme")

---

Linux tout seul sur HP Pavilion DV7 et Acer Aspire T650, Canon MG3650 en wifi
Debian 11 Bullseye Gnome/Xorg, Gnome/Wayland avec SDDM
https://bidouilledebian.wordpress.com/
ON M'A VU DANS LE VERCORS, SAUTER A L'ELASTIQUE..... J'AI DANS LES BOTTES DES MONTAGNES DE QUESTIONS....

Grenatu

Re : Recevoir la tnt avec une clé aver tv ?

@alduc31

Je pense ne pas avoir bien compris où je devais placer le fichier "dvb-usb-af9035-02.fw"
Quand j'essaye de rentrer la commande dans le terminal, il me demande effectivement mon mdp, puis m'affiche

"cp: impossible d'évaluer 'dvb-usb-af9035-02.fw': Aucun fichier ou dossier de ce type" 

@grandtoubab

Effectivement, j'ai entendu parler de molotov tv, mais ma connexion n'est pas tip-top, donc je préférerais utiliser ma clé tnt.

alduc31

Re : Recevoir la tnt avec une clé aver tv ?

Alors retourne le résultat de la commande suivante qui cherche le fichier :

find -name dvb-usb-af9035-02.fw

---

Asus UX325EA oled (i5-1135G7,16Go) avec Lunar 23.04 (base xubuntu modifiée)

Bougron

Re : Recevoir la tnt avec une clé aver tv ?

Bonjour
  Tu peux aussi installer ce logiciel.. https://doc.ubuntu-fr.org/kaffeine.
  La doc semble avoir été refaite. Elle ne mentionne plus qu'il était nécessaire d'utiliser VLC.
  Il y a des chances que le pilote standard ne pose aucun problème

Grenatu

Re : Recevoir la tnt avec une clé aver tv ?

@alduc31

Il m'indique que le fichier se trouve sur le bureau. C'est bien là où je l'ai mis, le problème c'est que je ne sais pas où le déplacer avant d'exécuter ta commande

@Bougron

J'ai installé kaffeine, mais je ne sais pas où trouver le logiciel ensuite. (oui je suis vraiment archi débutant d'ubuntu, j'aurais peut-être dû plus me renseigner sur les fonctionnalités de base, je vais aller faire ça d'ailleurs)

edit : je suis un boulet, c'est très simple à trouver une fois installé ^^" je vais aller lire la doc de kaffeine et voir ce que je peux faire avec du coup

Dernière modification par Grenatu (Le 09/08/2017, à 16:18)

alduc31

Re : Recevoir la tnt avec une clé aver tv ?

sudo cp Bureau/dvb-usb-af9035-02.fw  /lib/firmware/.

---

Asus UX325EA oled (i5-1135G7,16Go) avec Lunar 23.04 (base xubuntu modifiée)

Grenatu

Re : Recevoir la tnt avec une clé aver tv ?

J'ai tapé cette commande puis fais le dmsg, ça me donne ça :

[13170.286173] Call Trace:
[13170.286178]  __schedule+0x232/0x700
[13170.286182]  schedule+0x36/0x80
[13170.286188]  dvb_dmxdev_release+0x52/0x120 [dvb_core]
[13170.286192]  ? wake_atomic_t_function+0x60/0x60
[13170.286195]  dvb_usbv2_exit+0xae/0x380 [dvb_usb_v2]
[13170.286198]  dvb_usbv2_disconnect+0x60/0xd0 [dvb_usb_v2]
[13170.286201]  usb_unbind_interface+0x72/0x260
[13170.286205]  device_release_driver_internal+0x155/0x210
[13170.286207]  device_release_driver+0x12/0x20
[13170.286208]  bus_remove_device+0xfd/0x170
[13170.286210]  device_del+0x20e/0x350
[13170.286211]  ? usb_remove_ep_devs+0x1f/0x30
[13170.286213]  usb_disable_device+0x9e/0x270
[13170.286214]  usb_disconnect+0x92/0x290
[13170.286215]  hub_port_connect+0x82/0x9b0
[13170.286216]  hub_event+0x72b/0xb10
[13170.286219]  process_one_work+0x16b/0x4a0
[13170.286221]  worker_thread+0x4b/0x500
[13170.286224]  kthread+0x109/0x140
[13170.286225]  ? process_one_work+0x4a0/0x4a0
[13170.286227]  ? kthread_create_on_node+0x60/0x60
[13170.286230]  ret_from_fork+0x2c/0x40
[13171.310224] usb 3-4: dvb_usb_v2: usb_bulk_msg() failed=-19
[13171.310229] af9033 15-0038: i2c rd failed=-19 reg=800047 len=1

Sinon, j'ai testé Kaffeine. La recherche des chaînes se passe bien, par contre, on dirait que je capte très mal la tv : j'ai parfois du son, mais aucune image.
Pourtant je captais très bien au même emplacement avec un pc sous windows

Dernière modification par Grenatu (Le 09/08/2017, à 17:05)

alduc31

Re : Recevoir la tnt avec une clé aver tv ?

Les erreurs dans dmesg sentent pas bon.
Comme il y a 2 firmwares, on va essayer l'autre.

On efface le premier :

sudo  rm  /lib/firmware/dvb-usb-af9035-02.fw

On télécharge l'autre :

wget  -c  http://xgazza.altervista.org/Linux/DVB/dvb-usb-af9035-01.fw

On le copie au bon endroit :

sudo  cp  dvb-usb-af9035-01.fw  /lib/firmware/dvb-usb-af9035-01.fw

Puis débranche, rebranche la clé et retour de la commande dmesg.

---

Asus UX325EA oled (i5-1135G7,16Go) avec Lunar 23.04 (base xubuntu modifiée)

Grenatu

Re : Recevoir la tnt avec une clé aver tv ?

Ca me donne ça :

[14159.695431] af9033 15-0038: i2c rd failed=-19 reg=800047 len=1
[14162.253912] usb 3-4: dvb_usb_v2: usb_bulk_msg() failed=-19
[14162.253920] af9033 15-0038: i2c rd failed=-19 reg=800047 len=1
[14164.812621] usb 3-4: dvb_usb_v2: usb_bulk_msg() failed=-19
[14164.812626] af9033 15-0038: i2c rd failed=-19 reg=800047 len=1
[14167.371513] usb 3-4: dvb_usb_v2: usb_bulk_msg() failed=-19
[14167.371519] af9033 15-0038: i2c rd failed=-19 reg=800047 len=1
[14168.557674] usb 3-4: dvb_usb_v2: usb_bulk_msg() failed=-19
[14168.557681] usb 3-4: dvb_usb_v2: usb_bulk_msg() failed=-19
[14168.557684] af9033 15-0038: i2c wr failed=-19 reg=80004c len=1
[14168.557845] dvb_usb_v2: 'Avermedia A835B(3835):3-4' successfully deinitialized and disconnected
[14168.962933] usb 3-1: new high-speed USB device number 8 using xhci_hcd
[14169.106925] usb 3-1: New USB device found, idVendor=07ca, idProduct=3835
[14169.106928] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[14169.106930] usb 3-1: Product: A835B
[14169.106931] usb 3-1: Manufacturer: AVerMedia TECHNOLOGIES, Inc.
[14169.106933] usb 3-1: SerialNumber: 306901200537
[14169.109436] dvb_usb_af9035 3-1:1.0: prechip_version=83 chip_version=02 chip_type=9135
[14169.110097] usb 3-1: dvb_usb_v2: found a 'Avermedia A835B(3835)' in cold state
[14169.110129] usb 3-1: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw'
[14169.199468] dvb_usb_af9035 3-1:1.0: firmware version=3.40.1.0
[14169.199475] usb 3-1: dvb_usb_v2: found a 'Avermedia A835B(3835)' in warm state
[14169.200216] dvb_usb_af9035 3-1:1.0: [0] overriding tuner from 38 to 60
[14169.201489] usb 3-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[14169.201505] dvbdev: DVB: registering new adapter (Avermedia A835B(3835))
[14169.204147] af9033 15-0038: firmware version: LINK 3.40.1.0 - OFDM 3.40.1.0
[14169.204148] af9033 15-0038: Afatech AF9033 successfully attached
[14169.204155] usb 3-1: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[14169.205321] it913x 15-001c: ITE IT913X BX successfully attached
[14169.215933] Registered IR keymap rc-it913x-v2
[14169.216028] input: Avermedia A835B(3835) as /devices/pci0000:00/0000:00:14.0/usb3/3-1/rc/rc0/input18
[14169.216083] rc rc0: Avermedia A835B(3835) as /devices/pci0000:00/0000:00:14.0/usb3/3-1/rc/rc0
[14169.216085] usb 3-1: dvb_usb_v2: schedule remote query interval to 500 msecs
[14169.216088] usb 3-1: dvb_usb_v2: 'Avermedia A835B(3835)' successfully initialized and connected
[14456.759115] usb 3-1: USB disconnect, device number 8
[14456.794175] dvb_usb_v2: 'Avermedia A835B(3835):3-1' successfully deinitialized and disconnected
[14475.517173] wlp3s0: deauthenticating from 30:7c:b2:51:c3:4f by local choice (Reason: 3=DEAUTH_LEAVING)
[14476.497035] PM: Syncing filesystems ... done.
[14476.738724] PM: Preparing system for sleep (mem)
[14476.738958] Freezing user space processes ... (elapsed 0.002 seconds) done.
[14476.741181] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[14476.742554] PM: Suspending system (mem)
[14476.742592] Suspending console(s) (use no_console_suspend to debug)
[14476.743150] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[14476.821364] ACPI : EC: event blocked
[14476.851916] sd 0:0:0:0: [sda] Stopping disk
[14477.279752] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[14477.280952] radeon 0000:01:00.0: No VRAM object for PCIE GART.
[14477.281000] [drm:evergreen_resume [radeon]] *ERROR* evergreen startup failed on resume
[14477.325208] PM: suspend of devices complete after 582.087 msecs
[14477.344073] PM: late suspend of devices complete after 18.846 msecs
[14477.344651] ACPI : EC: interrupt blocked
[14477.344929] r8169 0000:02:00.0: System wakeup enabled by ACPI
[14477.345183] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[14477.345253] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[14477.345372] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[14477.364271] PM: noirq suspend of devices complete after 20.182 msecs
[14477.364689] ACPI: Preparing to enter system sleep state S3
[14477.365040] ACPI : EC: EC stopped
[14477.365041] PM: Saving platform NVS memory
[14477.365060] Disabling non-boot CPUs ...
[14477.365656] Broke affinity for irq 27
[14477.366707] smpboot: CPU 1 is now offline
[14477.381039] Broke affinity for irq 16
[14477.381044] Broke affinity for irq 17
[14477.381050] Broke affinity for irq 23
[14477.381054] Broke affinity for irq 25
[14477.381058] Broke affinity for irq 27
[14477.381061] Broke affinity for irq 28
[14477.382573] smpboot: CPU 2 is now offline
[14477.396962] Broke affinity for irq 1
[14477.396971] Broke affinity for irq 9
[14477.396976] Broke affinity for irq 12
[14477.396980] Broke affinity for irq 16
[14477.396985] Broke affinity for irq 17
[14477.396990] Broke affinity for irq 23
[14477.396992] Broke affinity for irq 25
[14477.396995] Broke affinity for irq 27
[14477.396997] Broke affinity for irq 28
[14477.398023] smpboot: CPU 3 is now offline
[14477.417830] ACPI: Low-level resume complete
[14477.417881] ACPI : EC: EC started
[14477.417881] PM: Restoring platform NVS memory
[14477.418179] Suspended for 4681.786 seconds
[14477.418914] Enabling non-boot CPUs ...
[14477.429901] x86: Booting SMP configuration:
[14477.429902] smpboot: Booting Node 0 Processor 1 APIC 0x2
[14477.432360]  cache: parent cpu1 should not be sleeping
[14477.432492] microcode: sig=0x306a9, pf=0x10, revision=0x15
[14477.432952] CPU1 is up
[14477.441919] smpboot: Booting Node 0 Processor 2 APIC 0x1
[14477.444390]  cache: parent cpu2 should not be sleeping
[14477.444484] microcode: sig=0x306a9, pf=0x10, revision=0x1c
[14477.444582] CPU2 is up
[14477.461890] smpboot: Booting Node 0 Processor 3 APIC 0x3
[14477.464270]  cache: parent cpu3 should not be sleeping
[14477.464604] CPU3 is up
[14477.468593] ACPI: Waking up from system sleep state S3
[14477.469340] ACPI : EC: interrupt unblocked
[14477.486582] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[14477.486636] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[14477.486671] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[14477.486778] PM: noirq resume of devices complete after 17.586 msecs
[14477.487215] PM: early resume of devices complete after 0.415 msecs
[14477.487315] ACPI : EC: event unblocked
[14477.489836] r8169 0000:02:00.0: System wakeup disabled by ACPI
[14477.489899] ACPI : EC: 0 stale EC events cleared
[14477.490009] ath: phy0: ASPM enabled: 0x42
[14477.497446] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[14477.497811] rtc_cmos 00:06: System wakeup disabled by ACPI
[14477.498657] radeon 0000:01:00.0: No VRAM object for PCIE GART.
[14477.498691] [drm:evergreen_resume [radeon]] *ERROR* evergreen startup failed on resume
[14477.500611] sd 0:0:0:0: [sda] Starting disk
[14477.604997] r8169 0000:02:00.0 enp2s0: link down
[14477.737888] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci
[14477.812417] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[14477.818348] ata5.00: configured for UDMA/100
[14477.925990] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci
[14478.114118] usb 1-1.2: reset full-speed USB device number 12 using ehci-pci
[14478.222436] usb 1-1.2: device firmware changed
[14478.222773] PM: resume of devices complete after 735.149 msecs
[14478.223063] PM: Finishing wakeup.
[14478.223064] Restarting tasks ... 
[14478.225291] usb 1-1.2: USB disconnect, device number 12
[14478.234581] done.
[14478.318266] usb 1-1.2: new full-speed USB device number 13 using ehci-pci
[14478.428574] usb 1-1.2: New USB device found, idVendor=0cf3, idProduct=3004
[14478.428580] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[14478.428583] usb 1-1.2: Product: Bluetooth USB Host Controller
[14478.428585] usb 1-1.2: Manufacturer: Atheros Communications
[14478.428587] usb 1-1.2: SerialNumber: Alaska Day 2006
[14478.468098] psmouse serio1: synaptics: queried max coordinates: x [..5724], y [..4782]
[14478.525623] psmouse serio1: synaptics: queried min coordinates: x [1308..], y [1206..]
[14479.911146] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[14479.913097] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[14479.913103] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[14479.913106] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[14479.916379] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[14479.916385] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[14479.916388] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[14479.917743] ata1.00: configured for UDMA/100
[14480.280935] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[14480.299717] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[14480.300694] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[14480.307421] usb 1-1.2: USB disconnect, device number 13
[14480.398278] r8169 0000:02:00.0 enp2s0: link down
[14480.398334] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[14480.455761] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[14480.539400] usb 1-1.2: new full-speed USB device number 14 using ehci-pci
[14482.357139] wlp3s0: authenticate with 30:7c:b2:51:c3:4f
[14482.377906] wlp3s0: send auth to 30:7c:b2:51:c3:4f (try 1/3)
[14482.380352] wlp3s0: authenticated
[14482.384413] wlp3s0: associate with 30:7c:b2:51:c3:4f (try 1/3)
[14482.389148] wlp3s0: RX AssocResp from 30:7c:b2:51:c3:4f (capab=0x431 status=0 aid=3)
[14482.389296] wlp3s0: associated
[14482.389369] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[14482.392628] ath: EEPROM regdomain: 0x80fa
[14482.392629] ath: EEPROM indicates we should expect a country code
[14482.392630] ath: doing EEPROM country->regdmn map search
[14482.392631] ath: country maps to regdmn code: 0x37
[14482.392632] ath: Country alpha2 being used: FR
[14482.392633] ath: Regpair used: 0x37
[14482.392634] ath: regdomain 0x80fa dynamically updated by country IE
[14485.718224] usb 1-1.2: device descriptor read/64, error -110
[14496.555820] usb 1-1.2: device not accepting address 14, error -32
[14496.635927] usb 1-1.2: new full-speed USB device number 15 using ehci-pci
[14496.746391] usb 1-1.2: New USB device found, idVendor=0cf3, idProduct=3004
[14496.746395] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[14496.746398] usb 1-1.2: Product: Bluetooth USB Host Controller
[14496.746401] usb 1-1.2: Manufacturer: Atheros Communications
[14496.746403] usb 1-1.2: SerialNumber: Alaska Day 2006
[14498.829020] Bluetooth: hci0 command 0x0c05 tx timeout
[14501.006126] Bluetooth: hci0 command 0x0c16 tx timeout
[14503.023129] Bluetooth: hci0 command 0x2002 tx timeout
[14505.104165] Bluetooth: hci0 command 0x2003 tx timeout
[14506.586494] wlp3s0: deauthenticating from 30:7c:b2:51:c3:4f by local choice (Reason: 3=DEAUTH_LEAVING)
[14506.778652] PM: Syncing filesystems ... done.
[14506.967461] PM: Preparing system for sleep (mem)
[14506.967689] Freezing user space processes ... (elapsed 0.017 seconds) done.
[14506.985098] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[14506.986541] PM: Suspending system (mem)
[14506.986577] Suspending console(s) (use no_console_suspend to debug)
[14506.987220] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[14507.062975] sd 0:0:0:0: [sda] Stopping disk
[14507.070115] ACPI : EC: event blocked
[14507.505093] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[14507.506293] radeon 0000:01:00.0: No VRAM object for PCIE GART.
[14507.506341] [drm:evergreen_resume [radeon]] *ERROR* evergreen startup failed on resume
[14507.545566] PM: suspend of devices complete after 558.500 msecs
[14507.565387] PM: late suspend of devices complete after 19.805 msecs
[14507.566066] ACPI : EC: interrupt blocked
[14507.566437] r8169 0000:02:00.0: System wakeup enabled by ACPI
[14507.566548] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[14507.566831] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[14507.566871] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[14507.585590] PM: noirq suspend of devices complete after 20.187 msecs
[14507.586049] ACPI: Preparing to enter system sleep state S3
[14507.586403] ACPI : EC: EC stopped
[14507.586404] PM: Saving platform NVS memory
[14507.586424] Disabling non-boot CPUs ...
[14507.587025] Broke affinity for irq 27
[14507.588086] smpboot: CPU 1 is now offline
[14507.602366] Broke affinity for irq 17
[14507.602372] Broke affinity for irq 23
[14507.602377] Broke affinity for irq 25
[14507.602381] Broke affinity for irq 27
[14507.602383] Broke affinity for irq 28
[14507.603903] smpboot: CPU 2 is now offline
[14507.622255] Broke affinity for irq 1
[14507.622264] Broke affinity for irq 9
[14507.622269] Broke affinity for irq 12
[14507.622273] Broke affinity for irq 16
[14507.622278] Broke affinity for irq 17
[14507.622282] Broke affinity for irq 23
[14507.622286] Broke affinity for irq 25
[14507.622288] Broke affinity for irq 27
[14507.622290] Broke affinity for irq 28
[14507.623314] smpboot: CPU 3 is now offline
[14507.643115] ACPI: Low-level resume complete
[14507.643168] ACPI : EC: EC started
[14507.643169] PM: Restoring platform NVS memory
[14507.643470] Suspended for 7157.792 seconds
[14507.644170] Enabling non-boot CPUs ...
[14507.655248] x86: Booting SMP configuration:
[14507.655249] smpboot: Booting Node 0 Processor 1 APIC 0x2
[14507.657726]  cache: parent cpu1 should not be sleeping
[14507.657861] microcode: sig=0x306a9, pf=0x10, revision=0x15
[14507.658324] CPU1 is up
[14507.667258] smpboot: Booting Node 0 Processor 2 APIC 0x1
[14507.669712]  cache: parent cpu2 should not be sleeping
[14507.669807] microcode: sig=0x306a9, pf=0x10, revision=0x1c
[14507.669916] CPU2 is up
[14507.687219] smpboot: Booting Node 0 Processor 3 APIC 0x3
[14507.689623]  cache: parent cpu3 should not be sleeping
[14507.689958] CPU3 is up
[14507.694100] ACPI: Waking up from system sleep state S3
[14507.694851] ACPI : EC: interrupt unblocked
[14507.711321] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[14507.711353] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[14507.711531] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[14507.715419] PM: noirq resume of devices complete after 20.718 msecs
[14507.715906] PM: early resume of devices complete after 0.464 msecs
[14507.716008] ACPI : EC: event unblocked
[14507.719198] ACPI : EC: 0 stale EC events cleared
[14507.719321] ath: phy0: ASPM enabled: 0x42
[14507.719348] r8169 0000:02:00.0: System wakeup disabled by ACPI
[14507.726016] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[14507.726342] sd 0:0:0:0: [sda] Starting disk
[14507.727171] rtc_cmos 00:06: System wakeup disabled by ACPI
[14507.727215] radeon 0000:01:00.0: No VRAM object for PCIE GART.
[14507.727259] [drm:evergreen_resume [radeon]] *ERROR* evergreen startup failed on resume
[14507.826287] r8169 0000:02:00.0 enp2s0: link down
[14508.003276] usb 1-1.2: reset full-speed USB device number 15 using ehci-pci
[14508.049764] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[14508.055704] ata5.00: configured for UDMA/100
[14508.111520] usb 1-1.2: device firmware changed
[14508.191321] usb 1-1.4: reset high-speed USB device number 5 using ehci-pci
[14508.379448] usb 1-1.1: reset high-speed USB device number 3 using ehci-pci
[14508.488680] PM: resume of devices complete after 772.386 msecs
[14508.489039] PM: Finishing wakeup.
[14508.489040] Restarting tasks ... 
[14508.501954] usb 1-1.2: USB disconnect, device number 15
[14508.506435] done.
[14508.587626] usb 1-1.2: new full-speed USB device number 16 using ehci-pci
[14508.696648] psmouse serio1: synaptics: queried max coordinates: x [..5724], y [..4782]
[14508.697351] usb 1-1.2: New USB device found, idVendor=0cf3, idProduct=3004
[14508.697353] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[14508.697354] usb 1-1.2: Product: Bluetooth USB Host Controller
[14508.697355] usb 1-1.2: Manufacturer: Atheros Communications
[14508.697356] usb 1-1.2: SerialNumber: Alaska Day 2006
[14508.746458] usb 1-1.2: USB disconnect, device number 16
[14508.754625] psmouse serio1: synaptics: queried min coordinates: x [1308..], y [1206..]
[14508.975722] usb 1-1.2: new full-speed USB device number 17 using ehci-pci
[14510.088275] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[14510.090097] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[14510.090101] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[14510.090104] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[14510.093298] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[14510.093302] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[14510.093305] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[14510.094785] ata1.00: configured for UDMA/100
[14510.329917] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[14510.347856] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[14510.349007] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[14510.467425] r8169 0000:02:00.0 enp2s0: link down
[14510.467484] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[14510.529548] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[14512.438016] wlp3s0: authenticate with 30:7c:b2:51:c3:4f
[14512.459329] wlp3s0: send auth to 30:7c:b2:51:c3:4f (try 1/3)
[14512.461816] wlp3s0: authenticated
[14512.471337] wlp3s0: associate with 30:7c:b2:51:c3:4f (try 1/3)
[14512.476143] wlp3s0: RX AssocResp from 30:7c:b2:51:c3:4f (capab=0x431 status=0 aid=2)
[14512.476267] wlp3s0: associated
[14512.476278] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[14512.480360] ath: EEPROM regdomain: 0x80fa
[14512.480361] ath: EEPROM indicates we should expect a country code
[14512.480362] ath: doing EEPROM country->regdmn map search
[14512.480363] ath: country maps to regdmn code: 0x37
[14512.480364] ath: Country alpha2 being used: FR
[14512.480364] ath: Regpair used: 0x37
[14512.480366] ath: regdomain 0x80fa dynamically updated by country IE
[14514.150232] usb 1-1.2: device descriptor read/64, error -110
[14524.987494] usb 1-1.2: device not accepting address 17, error -32
[14525.067535] usb 1-1.2: new full-speed USB device number 18 using ehci-pci
[14525.177742] usb 1-1.2: New USB device found, idVendor=0cf3, idProduct=3004
[14525.177744] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[14525.177746] usb 1-1.2: Product: Bluetooth USB Host Controller
[14525.177746] usb 1-1.2: Manufacturer: Atheros Communications
[14525.177747] usb 1-1.2: SerialNumber: Alaska Day 2006
[14683.709381] usb 3-4: new high-speed USB device number 9 using xhci_hcd
[14683.854540] usb 3-4: New USB device found, idVendor=07ca, idProduct=3835
[14683.854545] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[14683.854547] usb 3-4: Product: A835B
[14683.854551] usb 3-4: Manufacturer: AVerMedia TECHNOLOGIES, Inc.
[14683.854553] usb 3-4: SerialNumber: 306901200537
[14683.857401] dvb_usb_af9035 3-4:1.0: prechip_version=83 chip_version=02 chip_type=9135
[14683.858193] usb 3-4: dvb_usb_v2: found a 'Avermedia A835B(3835)' in cold state
[14683.858253] usb 3-4: dvb_usb_v2: downloading firmware from file 'dvb-usb-it9135-02.fw'
[14683.953396] dvb_usb_af9035 3-4:1.0: firmware version=3.40.1.0
[14683.953411] usb 3-4: dvb_usb_v2: found a 'Avermedia A835B(3835)' in warm state
[14683.954189] dvb_usb_af9035 3-4:1.0: [0] overriding tuner from 38 to 60
[14683.955515] usb 3-4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[14683.955550] dvbdev: DVB: registering new adapter (Avermedia A835B(3835))
[14683.958969] af9033 15-0038: firmware version: LINK 3.40.1.0 - OFDM 3.40.1.0
[14683.958972] af9033 15-0038: Afatech AF9033 successfully attached
[14683.958984] usb 3-4: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[14683.960740] it913x 15-001c: ITE IT913X BX successfully attached
[14683.971628] Registered IR keymap rc-it913x-v2
[14683.971814] input: Avermedia A835B(3835) as /devices/pci0000:00/0000:00:14.0/usb3/3-4/rc/rc0/input19
[14683.971959] rc rc0: Avermedia A835B(3835) as /devices/pci0000:00/0000:00:14.0/usb3/3-4/rc/rc0
[14683.971965] usb 3-4: dvb_usb_v2: schedule remote query interval to 500 msecs
[14683.971970] usb 3-4: dvb_usb_v2: 'Avermedia A835B(3835)' successfully initialized and connected

Pour le coup cette fois-ci j'ai l'impression que c'est plutôt bon, le pc a l'ai de reconnaître la clé

alduc31

Re : Recevoir la tnt avec une clé aver tv ?

[14683.958972] af9033 15-0038: Afatech AF9033 successfully attached
[14683.958984] usb 3-4: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...

Oui c'est bon.
Après tu as le choix de faire une recherche des chaines via w_scan ou via un logiciel (vlc, mplayer, ...).
Plus de détail dans la doc : https://doc.ubuntu-fr.org/tnt

---

Asus UX325EA oled (i5-1135G7,16Go) avec Lunar 23.04 (base xubuntu modifiée)

Grenatu

Re : Recevoir la tnt avec une clé aver tv ?

Du coup j'ai essayé de faire à nouveau une recherche de chaînes avec kaffeine.
Celui-ci me trouve toutes les chaînes disponibles, seulement, j'ai le même soucis que tout à l'heure : il n'y a pas d'image, et quasi pas de son, comme si je ne captais pas (alors que cette même clé fonctionne très bien sous windows)

grigouille

Re : Recevoir la tnt avec une clé aver tv ?

Il faudrait essayer avec vdr ou mythtv

---

Debian (xfce) 12
HP LaserJet M1132 MFP