Contenu | Rechercher | Menus

Annonce

Ubuntu 16.04 LTS
Commandez vos DVD et clés USB Ubuntu-fr !

Pour en savoir un peu plus sur l'équipe du forum.

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

#1 Le 06/08/2017, à 08:52

senacle

Reboot, freeze (gel écran)... Qu'arrive-t-il ?

Bonjour,

Depuis quelques semaines, mon PC redémarre ou a un gel d'écran, de manière aléatoire.
Après quelques recherches et mises en œuvre de préconisations, rien n'y fait.
Voici donc la situation.

Problème de chaleur
A priori, c'est à écarter.
En effet, j'ai mis en place un cron toutes les 10s avec sensor.
Juste avant un redémarrage/gel, les températures semblent normales.

dimanche 6 août 2017, 04:15:51 (UTC+0200)
acpitz-virtual-0
Adapter: Virtual device
temp1:        +40.0°C  (crit = +120.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +46.0°C  (high = +82.0°C, crit = +100.0°C)
Core 1:       +45.0°C  (high = +82.0°C, crit = +100.0°C)
Core 2:       +40.0°C  (high = +82.0°C, crit = +100.0°C)
Core 3:       +42.0°C  (high = +82.0°C, crit = +100.0°C)

radeon-pci-0100
Adapter: PCI adapter
temp1:        +88.0°C

Problème carte graphique
J'ai :
[*]changé la carte graphique (j'avais gardé l'ancienne), température identique.[/*]
[*]Installé les pilotes propriétaires, les pilotes Ubuntu[/*]
Toujours des plantages

Autres
[*]Lors de redémarrage, j'ai parfois ce message : CPU fan failure[/*]
Je passe outre et les températures sont correctes (voir ci-dessus)
[*]J'ai eu droit à un kernel panic[/*]
1502001885.jpg
J'ai mis en place kdump, il n'arrive à intercepter que très peu de crashes (il y a un fichier /var/crash/linux-image-3.13.0-123-generic-201708051040.crash, mais il est binaire; comment le rendre lisible ?).
Aucune trace dans les autres logs (kernel, sys, dmes) juste avant les crashes.

Bref, je ne sais plus trop faire.

Dernière modification par senacle (Le 06/08/2017, à 10:06)


Ubuntu 16.04 - Noyau 4.10.0-35.39
Intel® Core™ i7-7700K CPU @ 4.20GHz × 8
RAM 16 Go
GeForce GTX 1070/PCIe/SSE2

Hors ligne

#2 Le 06/08/2017, à 09:30

ublender

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

Bonjour,

temp1:        +88.0°C

Tu es sûr que c'est normal ça? C'est bizarre que seulement la carte graphique chauffe énormément. Tu as nettoyé les ventilateurs?

Dernière modification par ublender (Le 06/08/2017, à 09:30)

Hors ligne

#3 Le 06/08/2017, à 10:09

senacle

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

ublender a écrit :

Bonjour,

temp1:        +88.0°C

Tu es sûr que c'est normal ça?

Pas vraiment sûr que ce soit normal, mais avec une carte graphique avec radiateur, ça tourne autour de 89-90°C, avec celle avec ventilateur, c'est 88-90°C.
Comme j'ai la même chose avec deux cartes différentes, je me dis que ce n'est pas là l'origine du problème.
Mais je peux tomber sur un cas où j'ai deux cartes qui chauffent trop...


Ubuntu 16.04 - Noyau 4.10.0-35.39
Intel® Core™ i7-7700K CPU @ 4.20GHz × 8
RAM 16 Go
GeForce GTX 1070/PCIe/SSE2

Hors ligne

#4 Le 07/08/2017, à 09:11

ublender

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

Je te conseille de nettoyer les ventilateurs, de vérifier que rien n'empêche de le(s) faire tourner (genre un câble qui peut y toucher, et le câble du ventilo qui est bien branché), même le bios (CPU fan failure) te prévient qu'il y a un problème avec le ventilateur.
Quel est ton pc? Quelles sont les deux cartes graphiques? Y en a t'il une neuve?
Et aussi: fais tu tourner des gros jeux vidéos? (ce qui expliquerait la température, si c'est 90 degrés au repos c'est pas bien)

Hors ligne

#5 Le 08/08/2017, à 20:22

senacle

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

ublender a écrit :

nettoyer les ventilateurs

Je le fais régulièrement

ublender a écrit :

vérifier que rien n'empêche de le(s) faire tourner

Aucun problème, ça tourne

ublender a écrit :

même le bios (CPU fan failure) te prévient qu'il y a un problème avec le ventilateur

Ce n'est pas systématique, en général, ça arrive après avoir éteint le PC avec le bouton marche/arrêt.

ublender a écrit :

Quel est ton pc ?

Dell Inspiron 530
Intel® Core™2 Quad CPU Q6600 @ 2.40GHz × 4
8 Gio RAM

ublender a écrit :

Quelles sont les deux cartes graphiques ?

Gallium 0.4 on AMD RV635 : celle d'origine avec ventilateur, qui est dans le PC en ce moment.
Radeon HD5450

ublender a écrit :

fais tu tourner des gros jeux vidéos ?

Non

ublender a écrit :

90 degrés au repos

Là avec seulement firefox, c'est 90°C
Et dans le cron que j'avais mis pour surveiller, c'est toujours dans ces eaux-là.

Je précise que jusqu'à début juillet, je n'ai jamais eu ce problème.
Puis au retour de vacances, mise à jour d'Ubuntu, et les ennuis ont commencé (maintenant, je suis en 3.13.0-126).
Y a-t-il un rapport ?

Dernière modification par senacle (Le 08/08/2017, à 20:24)


Ubuntu 16.04 - Noyau 4.10.0-35.39
Intel® Core™ i7-7700K CPU @ 4.20GHz × 8
RAM 16 Go
GeForce GTX 1070/PCIe/SSE2

Hors ligne

#6 Le 08/08/2017, à 21:50

ublender

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

Je précise que jusqu'à début juillet, je n'ai jamais eu ce problème.
Puis au retour de vacances, mise à jour d'Ubuntu, et les ennuis ont commencé (maintenant, je suis en 3.13.0-126).
Y a-t-il un rapport ?

Ah, sûrement oui.

Peux tu regarder si un ou plusieurs processus accaparent le processeur (avec la commande top tu peux voir les processus, q permet de quitter)? Peut être qu'un processus tourne en boucle et surcharge le processeur.
Tu as mis les pilotes propriétaires?

Dernière modification par ublender (Le 08/08/2017, à 21:53)

Hors ligne

#7 Le 09/08/2017, à 19:50

senacle

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

ublender a écrit :

Peux tu regarder si un ou plusieurs processus accaparent le processeur (avec la commande top tu peux voir les processus, q permet de quitter)? Peut être qu'un processus tourne en boucle et surcharge le processeur.

Rien d'anormal de ce côté.
La température des cœurs du processeur est correcte (voir premier post).

ublender a écrit :

Tu as mis les pilotes propriétaires?

Pilotes libres pour l'instant.
Je tente de réinstaller les pilotes propriétaires pour voir ce que ça donne.


Ubuntu 16.04 - Noyau 4.10.0-35.39
Intel® Core™ i7-7700K CPU @ 4.20GHz × 8
RAM 16 Go
GeForce GTX 1070/PCIe/SSE2

Hors ligne

#8 Le 09/08/2017, à 22:20

senacle

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

Avec l'ancienne carte, je viens de réinitialiser le serveur X comme indiqué ici : Purger installation (je pense que les pilotes libres et propriétaires coexistaient), puis activer la gestion de l'énergie.
J'ai gagné 7-8°C sur la carte.

Et pas de redémarrage pour l'instant.

Je verrai demain, je remettrai ma nouvelle carte pour voir...


Ubuntu 16.04 - Noyau 4.10.0-35.39
Intel® Core™ i7-7700K CPU @ 4.20GHz × 8
RAM 16 Go
GeForce GTX 1070/PCIe/SSE2

Hors ligne

#9 Le 10/08/2017, à 10:08

ublender

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

7-8 degrés de différence, c'est bien mais ce serait bien d'avoir moins de 70 degrés. Ok, je te laisse essayer avec l'autre carte.
Il me semble que la gestion d'énergie est activée par défaut, donc je pense que c'est surtout la première partie qui a été efficace.
Peux tu donner le retour de

dmesg

pour voir si on peut en retirer quelque chose?

Dernière modification par ublender (Le 10/08/2017, à 10:12)

Hors ligne

#10 Le 10/08/2017, à 21:30

senacle

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

Voici le contenu de dmesg, après un redémarrage.
Toujours avec l'ancienne carte.

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.13.0-126-generic (buildd@lgw01-18) (gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3) ) #175-Ubuntu SMP Thu Jul 20 17:33:56 UTC 2017 (Ubuntu 3.13.0-126.175-generic 3.13.11-ckt39)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-126-generic root=UUID=3336d55c-05ad-4335-9dd9-6339ca5c2cc2 ro quiet splash radeon.dpm=1 crashkernel=384M-:128M vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cfe8ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cfe90000-0x00000000cfee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cfee3000-0x00000000cfeeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cfef0000-0x00000000cfefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: Dell Inc. Inspiron 530/0FM586, BIOS 1.0.13 03/20/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x230000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CEFFF write-protect
[    0.000000]   CF000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 100000000 mask F00000000 write-back
[    0.000000]   1 base 200000000 mask FE0000000 write-back
[    0.000000]   2 base 220000000 mask FF0000000 write-back
[    0.000000]   3 base 000000000 mask F80000000 write-back
[    0.000000]   4 base 080000000 mask FC0000000 write-back
[    0.000000]   5 base 0C0000000 mask FF0000000 write-back
[    0.000000]   6 base 0CFF00000 mask FFFF00000 uncachable
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 4GB, range: 4GB, type WB
[    0.000000] reg 1, base: 8GB, range: 512MB, type WB
[    0.000000] reg 2, base: 8704MB, range: 256MB, type WB
[    0.000000] reg 3, base: 0GB, range: 2GB, type WB
[    0.000000] reg 4, base: 2GB, range: 1GB, type WB
[    0.000000] reg 5, base: 3GB, range: 256MB, type WB
[    0.000000] reg 6, base: 3327MB, range: 1MB, type UC
[    0.000000] total RAM covered: 8191M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 2M 	num_reg: 7  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 256MB, type WB
[    0.000000] reg 3, base: 3327MB, range: 1MB, type UC
[    0.000000] reg 4, base: 4GB, range: 4GB, type WB
[    0.000000] reg 5, base: 8GB, range: 512MB, type WB
[    0.000000] reg 6, base: 8704MB, range: 256MB, type WB
[    0.000000] e820: update [mem 0xcff00000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcfe90 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000f3f00-0x000f3f0f] mapped at [ffff8800000f3f00]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[    0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[    0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x22fe00000-0x22fffffff]
[    0.000000]  [mem 0x22fe00000-0x22fffffff] page 2M
[    0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x22c000000-0x22fdfffff]
[    0.000000]  [mem 0x22c000000-0x22fdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x200000000-0x22bffffff]
[    0.000000]  [mem 0x200000000-0x22bffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xcfe8ffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xcfdfffff] page 2M
[    0.000000]  [mem 0xcfe00000-0xcfe8ffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[    0.000000]  [mem 0x100000000-0x1ffffffff] page 2M
[    0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
[    0.000000] BRK [0x01fe8000, 0x01fe8fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x359b8000-0x36cd3fff]
[    0.000000] ACPI: RSDP 00000000000f97a0 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 00000000cfee3080 00005C (v01 DELL    FX09    42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 00000000cfee7200 0000F4 (v03 DELL    FX09    42302E31 AWRD 00000000)
[    0.000000] ACPI: DSDT 00000000cfee3200 003FFC (v01 DELL   AWRDACPI 00001000 MSFT 03000000)
[    0.000000] ACPI: FACS 00000000cfe90000 000040
[    0.000000] ACPI: HPET 00000000cfee73c0 000038 (v01 DELL    FX09    42302E31 AWRD 00000098)
[    0.000000] ACPI: MCFG 00000000cfee7400 00003C (v01 DELL    FX09    42302E31 AWRD 00000000)
[    0.000000] ACPI: SLIC 00000000cfee7440 000176 (v01 DELL    FX09    42302E31 AWRD 00000000)
[    0.000000] ACPI: DMY2 00000000cfee75c0 000080 (v01 DELL    FX09    42302E31 AWRD 00000000)
[    0.000000] ACPI: APIC 00000000cfee7300 000084 (v01 DELL    FX09    42302E31 AWRD 00000000)
[    0.000000] ACPI: SSDT 00000000cfee7f60 000380 (v01  PmRef    CpuPm 00003000 INTL 20041203)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x22fffffff]
[    0.000000]   NODE_DATA [mem 0x22fff5000-0x22fff9fff]
[    0.000000] Reserving 128MB of memory at 720MB for crashkernel (System RAM: 8190MB)
[    0.000000]  [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227600000-ffff88022f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x22fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0xcfe8ffff]
[    0.000000]   node   0: [mem 0x100000000-0x22fffffff]
[    0.000000] On node 0 totalpages: 2096685
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13243 pages used for memmap
[    0.000000]   DMA32 zone: 847504 pages, LIFO batch:31
[    0.000000]   Normal zone: 19456 pages used for memmap
[    0.000000]   Normal zone: 1245184 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfe90000-0xcfee2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfee3000-0xcfeeffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcfef0000-0xcfefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcff00000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
[    0.000000] e820: [mem 0xcff00000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88022fc00000 s81536 r8192 d20864 u524288
[    0.000000] pcpu-alloc: s81536 r8192 d20864 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2063901
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-126-generic root=UUID=3336d55c-05ad-4335-9dd9-6339ca5c2cc2 ro quiet splash radeon.dpm=1 crashkernel=384M-:128M vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8021876K/8386740K available (7433K kernel code, 1147K rwdata, 3424K rodata, 1340K init, 1448K bss, 364864K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-3.
[    0.000000] NR_IRQS:16640 nr_irqs:712 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 33554432 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2393.945 MHz processor
[    0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.89 BogoMIPS (lpj=9575780)
[    0.008007] pid_max: default: 32768 minimum: 301
[    0.008043] Security Framework initialized
[    0.008066] AppArmor: AppArmor initialized
[    0.008067] Yama: becoming mindful.
[    0.008779] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.012507] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.014275] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.014289] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.014647] Initializing cgroup subsys memory
[    0.014657] Initializing cgroup subsys devices
[    0.014660] Initializing cgroup subsys freezer
[    0.014662] Initializing cgroup subsys blkio
[    0.014664] Initializing cgroup subsys perf_event
[    0.014667] Initializing cgroup subsys hugetlb
[    0.014692] CPU: Physical Processor ID: 0
[    0.014694] CPU: Processor Core ID: 0
[    0.014696] mce: CPU supports 6 MCE banks
[    0.014704] CPU0: Thermal monitoring enabled (TM2)
[    0.014708] process: using mwait in idle threads
[    0.014713] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.014713] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[    0.014713] tlb_flushall_shift: -1
[    0.014813] Freeing SMP alternatives memory: 32K (ffffffff81e6f000 - ffffffff81e77000)
[    0.016381] ACPI: Core revision 20131115
[    0.018345] ACPI: All ACPI Tables successfully acquired
[    0.020005] ftrace: allocating 28676 entries in 113 pages
[    0.032453] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.073132] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz (fam: 06, model: 0f, stepping: 0b)
[    0.076000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.076000] perf_event_intel: PEBS disabled due to CPU errata
[    0.076000] ... version:                2
[    0.076000] ... bit width:              40
[    0.076000] ... generic registers:      2
[    0.076000] ... value mask:             000000ffffffffff
[    0.076000] ... max period:             000000007fffffff
[    0.076000] ... fixed-purpose events:   3
[    0.076000] ... event mask:             0000000700000003
[    0.076000] x86: Booting SMP configuration:
[    0.087357] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.076000] .... node  #0, CPUs:      #1 #2 #3
[    0.112040] x86: Booted up 1 node, 4 CPUs
[    0.112045] smpboot: Total of 4 processors activated (19151.56 BogoMIPS)
[    0.116176] devtmpfs: initialized
[    0.126871] EVM: security.selinux
[    0.126873] EVM: security.SMACK64
[    0.126874] EVM: security.ima
[    0.126875] EVM: security.capability
[    0.126889] PM: Registering ACPI NVS region [mem 0xcfe90000-0xcfee2fff] (339968 bytes)
[    0.128046] pinctrl core: initialized pinctrl subsystem
[    0.128119] regulator-dummy: no parameters
[    0.128148] RTC time: 19:10:20, date: 08/10/17
[    0.128190] NET: Registered protocol family 16
[    0.128326] cpuidle: using governor ladder
[    0.128328] cpuidle: using governor menu
[    0.128373] ACPI: bus type PCI registered
[    0.128375] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.128435] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.128438] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.147704] PCI: Using configuration type 1 for base access
[    0.148803] bio: create slab <bio-0> at 0
[    0.148803] ACPI: Added _OSI(Module Device)
[    0.148803] ACPI: Added _OSI(Processor Device)
[    0.148803] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.148803] ACPI: Added _OSI(Processor Aggregator Device)
[    0.152681] ACPI: SSDT 00000000cfee7680 00022A (v01  PmRef  Cpu0Ist 00003000 INTL 20041203)
[    0.152850] ACPI: Dynamic OEM Table Load:
[    0.152852] ACPI: SSDT           (null) 00022A (v01  PmRef  Cpu0Ist 00003000 INTL 20041203)
[    0.152941] ACPI: SSDT 00000000cfee7b40 000152 (v01  PmRef  Cpu1Ist 00003000 INTL 20041203)
[    0.153101] ACPI: Dynamic OEM Table Load:
[    0.153103] ACPI: SSDT           (null) 000152 (v01  PmRef  Cpu1Ist 00003000 INTL 20041203)
[    0.153190] ACPI: SSDT 00000000cfee7ca0 000152 (v01  PmRef  Cpu2Ist 00003000 INTL 20041203)
[    0.153350] ACPI: Dynamic OEM Table Load:
[    0.153352] ACPI: SSDT           (null) 000152 (v01  PmRef  Cpu2Ist 00003000 INTL 20041203)
[    0.153440] ACPI: SSDT 00000000cfee7e00 000152 (v01  PmRef  Cpu3Ist 00003000 INTL 20041203)
[    0.153602] ACPI: Dynamic OEM Table Load:
[    0.153604] ACPI: SSDT           (null) 000152 (v01  PmRef  Cpu3Ist 00003000 INTL 20041203)
[    0.153714] ACPI: Interpreter enabled
[    0.153719] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[    0.153723] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[    0.153736] ACPI: (supports S0 S3 S4 S5)
[    0.153738] ACPI: Using IOAPIC for interrupt routing
[    0.153759] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.153844] ACPI: No dock devices found.
[    0.157688] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.157694] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.157699] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.157945] PCI host bridge to bus 0000:00
[    0.157948] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.157950] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.157953] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.157955] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.157957] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[    0.157959] pci_bus 0000:00: root bus resource [mem 0xcff00000-0xfebfffff]
[    0.157968] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.158067] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[    0.158105] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.158203] pci 0000:00:19.0: [8086:10c0] type 00 class 0x020000
[    0.158221] pci 0000:00:19.0: reg 0x10: [mem 0xfdfc0000-0xfdfdffff]
[    0.158229] pci 0000:00:19.0: reg 0x14: [mem 0xfdfff000-0xfdffffff]
[    0.158237] pci 0000:00:19.0: reg 0x18: [io  0xff00-0xff1f]
[    0.158295] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.158346] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.158380] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.158420] pci 0000:00:1a.0: reg 0x20: [io  0xfe00-0xfe1f]
[    0.158501] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.158534] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.158573] pci 0000:00:1a.1: reg 0x20: [io  0xfd00-0xfd1f]
[    0.158652] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.158685] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.158724] pci 0000:00:1a.2: reg 0x20: [io  0xfc00-0xfc1f]
[    0.158804] pci 0000:00:1a.2: System wakeup disabled by ACPI
[    0.158843] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.158859] pci 0000:00:1a.7: reg 0x10: [mem 0xfdffe000-0xfdffe3ff]
[    0.158927] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.158975] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.159012] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.159026] pci 0000:00:1b.0: reg 0x10: [mem 0xfdff4000-0xfdff7fff 64bit]
[    0.159088] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.159139] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.159178] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.159218] pci 0000:00:1d.0: reg 0x20: [io  0xfb00-0xfb1f]
[    0.159299] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.159332] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.159371] pci 0000:00:1d.1: reg 0x20: [io  0xfa00-0xfa1f]
[    0.159449] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.159482] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.159521] pci 0000:00:1d.2: reg 0x20: [io  0xf900-0xf91f]
[    0.159599] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.159636] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.159652] pci 0000:00:1d.7: reg 0x10: [mem 0xfdffd000-0xfdffd3ff]
[    0.159730] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.159778] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.159811] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.159901] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.159935] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
[    0.160009] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[    0.160014] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.160017] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
[    0.160021] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 003f)
[    0.160121] pci 0000:00:1f.2: [8086:2920] type 00 class 0x01018f
[    0.160136] pci 0000:00:1f.2: reg 0x10: [io  0xf800-0xf807]
[    0.160143] pci 0000:00:1f.2: reg 0x14: [io  0xf700-0xf703]
[    0.160151] pci 0000:00:1f.2: reg 0x18: [io  0xf600-0xf607]
[    0.160159] pci 0000:00:1f.2: reg 0x1c: [io  0xf500-0xf503]
[    0.160166] pci 0000:00:1f.2: reg 0x20: [io  0xf400-0xf40f]
[    0.160174] pci 0000:00:1f.2: reg 0x24: [io  0xf300-0xf30f]
[    0.160273] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.160287] pci 0000:00:1f.3: reg 0x10: [mem 0xfdffc000-0xfdffc0ff 64bit]
[    0.160307] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
[    0.160394] pci 0000:00:1f.5: [8086:2926] type 00 class 0x010185
[    0.160408] pci 0000:00:1f.5: reg 0x10: [io  0xf100-0xf107]
[    0.160416] pci 0000:00:1f.5: reg 0x14: [io  0xf000-0xf003]
[    0.160423] pci 0000:00:1f.5: reg 0x18: [io  0xef00-0xef07]
[    0.160431] pci 0000:00:1f.5: reg 0x1c: [io  0xee00-0xee03]
[    0.160438] pci 0000:00:1f.5: reg 0x20: [io  0xed00-0xed0f]
[    0.160446] pci 0000:00:1f.5: reg 0x24: [io  0xec00-0xec0f]
[    0.160580] pci 0000:01:00.0: [1002:9598] type 00 class 0x030000
[    0.160593] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.160604] pci 0000:01:00.0: reg 0x18: [mem 0xfdde0000-0xfddeffff 64bit]
[    0.160611] pci 0000:01:00.0: reg 0x20: [io  0xce00-0xceff]
[    0.160624] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.160654] pci 0000:01:00.0: supports D1 D2
[    0.160693] pci 0000:01:00.1: [1002:aa20] type 00 class 0x040300
[    0.160705] pci 0000:01:00.1: reg 0x10: [mem 0xfddfc000-0xfddfffff 64bit]
[    0.160761] pci 0000:01:00.1: supports D1 D2
[    0.160810] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.160813] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.160816] pci 0000:00:01.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.160820] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.160886] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[    0.160890] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.160893] pci 0000:00:1e.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.160899] pci 0000:00:1e.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.160901] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.160903] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.160906] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.160908] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[    0.160910] pci 0000:00:1e.0:   bridge window [mem 0xcff00000-0xfebfffff] (subtractive decode)
[    0.161238] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.161296] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 9 10 11 12 14 15)
[    0.161352] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.161408] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.161464] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.161519] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.161575] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 *4 5 7 9 10 11 12 14 15)
[    0.161630] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[    0.161765] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.161771] ACPI: \_SB_.PCI0: notify handler is installed
[    0.161800] Found 1 acpi root devices
[    0.161876] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.161876] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.161876] vgaarb: loaded
[    0.161876] vgaarb: bridge control possible 0000:01:00.0
[    0.161876] SCSI subsystem initialized
[    0.161876] libata version 3.00 loaded.
[    0.161876] ACPI: bus type USB registered
[    0.161876] usbcore: registered new interface driver usbfs
[    0.161876] usbcore: registered new interface driver hub
[    0.161876] usbcore: registered new device driver usb
[    0.161876] PCI: Using ACPI for IRQ routing
[    0.167971] PCI: pci_cache_line_size set to 64 bytes
[    0.168015] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.168017] e820: reserve RAM buffer [mem 0xcfe90000-0xcfffffff]
[    0.168105] NetLabel: Initializing
[    0.168106] NetLabel:  domain hash size = 128
[    0.168108] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.168123] NetLabel:  unlabeled traffic allowed by default
[    0.168142] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.168142] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.168142] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.170093] Switched to clocksource hpet
[    0.174335] AppArmor: AppArmor Filesystem Enabled
[    0.174368] pnp: PnP ACPI init
[    0.174389] ACPI: bus type PNP registered
[    0.174552] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.174555] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.174557] system 00:00: [io  0x0290-0x0297] has been reserved
[    0.174560] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.174564] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.174575] pnp 00:01: [dma 4]
[    0.174594] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.174674] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.174718] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.174748] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.174782] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.174917] pnp 00:06: [dma 2]
[    0.174948] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.175027] system 00:07: [io  0x0400-0x04bf] could not be reserved
[    0.175031] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.175064] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[    0.175260] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[    0.175263] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.175357] system 00:0a: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.175360] system 00:0a: [mem 0xcff00000-0xcfffffff] has been reserved
[    0.175362] system 00:0a: [mem 0xfed00000-0xfed000ff] has been reserved
[    0.175365] system 00:0a: [mem 0xcfe90000-0xcfefffff] could not be reserved
[    0.175368] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.175370] system 00:0a: [mem 0x00100000-0xcfe8ffff] could not be reserved
[    0.175373] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.175375] system 00:0a: [mem 0xfed14000-0xfed1dfff] has been reserved
[    0.175378] system 00:0a: [mem 0xfed20000-0xfed9ffff] has been reserved
[    0.175380] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.175382] system 00:0a: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.175385] system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved
[    0.175387] system 00:0a: [mem 0x000e0000-0x000effff] has been reserved
[    0.175390] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.175398] pnp: PnP ACPI: found 11 devices
[    0.175399] ACPI: bus type PNP unregistered
[    0.183039] pci 0000:01:00.0: BAR 6: assigned [mem 0xfdd00000-0xfdd1ffff pref]
[    0.183043] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.183045] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.183049] pci 0000:00:01.0:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.183052] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.183057] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.183059] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.183064] pci 0000:00:1e.0:   bridge window [mem 0xfdc00000-0xfdcfffff]
[    0.183068] pci 0000:00:1e.0:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.183074] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.183076] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.183078] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.183080] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.183082] pci_bus 0000:00: resource 8 [mem 0xcff00000-0xfebfffff]
[    0.183085] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.183087] pci_bus 0000:01: resource 1 [mem 0xfdd00000-0xfddfffff]
[    0.183089] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.183091] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.183093] pci_bus 0000:02: resource 1 [mem 0xfdc00000-0xfdcfffff]
[    0.183096] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.183097] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    0.183099] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    0.183102] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    0.183104] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff]
[    0.183106] pci_bus 0000:02: resource 8 [mem 0xcff00000-0xfebfffff]
[    0.183140] NET: Registered protocol family 2
[    0.183382] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.183642] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.183976] TCP: Hash tables configured (established 65536 bind 65536)
[    0.184025] TCP: reno registered
[    0.184039] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.184097] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.184217] NET: Registered protocol family 1
[    0.185230] pci 0000:01:00.0: Video device with shadowed ROM
[    0.185235] PCI: CLS 64 bytes, default 64
[    0.185320] Trying to unpack rootfs image as initramfs...
[    0.532475] Freeing initrd memory: 19568K (ffff8800359b8000 - ffff880036cd4000)
[    0.532484] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.532487] software IO TLB [mem 0xcbe90000-0xcfe90000] (64MB) mapped at [ffff8800cbe90000-ffff8800cfe8ffff]
[    0.532791] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb6
[    0.532805] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb6
[    0.532820] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb6
[    0.532834] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb6
[    0.532931] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.532934] Scanning for low memory corruption every 60 seconds
[    0.533192] Initialise system trusted keyring
[    0.533255] audit: initializing netlink socket (disabled)
[    0.533271] type=2000 audit(1502392217.532:1): initialized
[    0.563800] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.565376] zbud: loaded
[    0.565551] VFS: Disk quotas dquot_6.5.2
[    0.565595] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.566107] fuse init (API version 7.22)
[    0.566221] msgmni has been set to 15706
[    0.566296] Key type big_key registered
[    0.566840] Key type asymmetric registered
[    0.566843] Asymmetric key parser 'x509' registered
[    0.566888] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.566940] io scheduler noop registered
[    0.566943] io scheduler deadline registered (default)
[    0.566984] io scheduler cfq registered
[    0.567173] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.567232] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.567247] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.567288] vesafb: mode is 1400x1050x32, linelength=5632, pages=0
[    0.567289] vesafb: scrolling: redraw
[    0.567291] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.570775] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010e80000, using 5824k, total 5824k
[    0.574652] Console: switching to colour frame buffer device 175x65
[    0.578381] fb0: VESA VGA frame buffer device
[    0.578409] intel_idle: does not run on family 6 model 15
[    0.578415] ipmi message handler version 39.2
[    0.578492] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.578497] ACPI: Power Button [PWRB]
[    0.578540] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.578543] ACPI: Power Button [PWRF]
[    0.578584] ACPI: Fan [FAN] (on)
[    0.579012] thermal LNXTHERM:00: registered as thermal_zone0
[    0.579014] ACPI: Thermal Zone [THRM] (40 C)
[    0.579041] GHES: HEST is not enabled!
[    0.579136] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.580530] Linux agpgart interface v0.103
[    0.581944] brd: module loaded
[    0.582656] loop: module loaded
[    0.582784] ata_piix 0000:00:1f.2: version 2.13
[    0.582861] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.583477] scsi0 : ata_piix
[    0.583573] scsi1 : ata_piix
[    0.583623] ata1: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf400 irq 19
[    0.583628] ata2: SATA max UDMA/133 cmd 0xf600 ctl 0xf500 bmdma 0xf408 irq 19
[    0.583737] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.584165] scsi2 : ata_piix
[    0.584258] scsi3 : ata_piix
[    0.584306] ata3: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 19
[    0.584311] ata4: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 19
[    0.584702] libphy: Fixed MDIO Bus: probed
[    0.584799] tun: Universal TUN/TAP device driver, 1.6
[    0.584800] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.584838] PPP generic driver version 2.4.2
[    0.584879] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.584884] ehci-pci: EHCI PCI platform driver
[    0.584976] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.584982] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.588889] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    0.588905] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfdffe000
[    0.600031] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.600092] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.600096] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.600099] usb usb1: Product: EHCI Host Controller
[    0.600103] usb usb1: Manufacturer: Linux 3.13.0-126-generic ehci_hcd
[    0.600106] usb usb1: SerialNumber: 0000:00:1a.7
[    0.600239] hub 1-0:1.0: USB hub found
[    0.600246] hub 1-0:1.0: 6 ports detected
[    0.600450] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.600456] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.604361] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.604374] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdffd000
[    0.616024] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.616089] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.616093] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.616096] usb usb2: Product: EHCI Host Controller
[    0.616099] usb usb2: Manufacturer: Linux 3.13.0-126-generic ehci_hcd
[    0.616103] usb usb2: SerialNumber: 0000:00:1d.7
[    0.616216] hub 2-0:1.0: USB hub found
[    0.616222] hub 2-0:1.0: 6 ports detected
[    0.616345] ehci-platform: EHCI generic platform driver
[    0.616353] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.616355] ohci-pci: OHCI PCI platform driver
[    0.616364] ohci-platform: OHCI generic platform driver
[    0.616371] uhci_hcd: USB Universal Host Controller Interface driver
[    0.616446] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.616452] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.616482] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
[    0.616523] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.616526] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.616528] usb usb3: Product: UHCI Host Controller
[    0.616530] usb usb3: Manufacturer: Linux 3.13.0-126-generic uhci_hcd
[    0.616532] usb usb3: SerialNumber: 0000:00:1a.0
[    0.616615] hub 3-0:1.0: USB hub found
[    0.616622] hub 3-0:1.0: 2 ports detected
[    0.616759] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.616765] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.616793] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fd00
[    0.616836] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.616838] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.616840] usb usb4: Product: UHCI Host Controller
[    0.616842] usb usb4: Manufacturer: Linux 3.13.0-126-generic uhci_hcd
[    0.616845] usb usb4: SerialNumber: 0000:00:1a.1
[    0.616926] hub 4-0:1.0: USB hub found
[    0.616933] hub 4-0:1.0: 2 ports detected
[    0.617068] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.617073] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.617094] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fc00
[    0.617136] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.617139] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.617141] usb usb5: Product: UHCI Host Controller
[    0.617143] usb usb5: Manufacturer: Linux 3.13.0-126-generic uhci_hcd
[    0.617145] usb usb5: SerialNumber: 0000:00:1a.2
[    0.617229] hub 5-0:1.0: USB hub found
[    0.617235] hub 5-0:1.0: 2 ports detected
[    0.617372] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.617377] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.617398] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fb00
[    0.617441] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.617444] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.617446] usb usb6: Product: UHCI Host Controller
[    0.617448] usb usb6: Manufacturer: Linux 3.13.0-126-generic uhci_hcd
[    0.617450] usb usb6: SerialNumber: 0000:00:1d.0
[    0.617530] hub 6-0:1.0: USB hub found
[    0.617536] hub 6-0:1.0: 2 ports detected
[    0.617669] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.617675] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.617695] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fa00
[    0.617736] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.617738] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.617740] usb usb7: Product: UHCI Host Controller
[    0.617743] usb usb7: Manufacturer: Linux 3.13.0-126-generic uhci_hcd
[    0.617745] usb usb7: SerialNumber: 0000:00:1d.1
[    0.617823] hub 7-0:1.0: USB hub found
[    0.617830] hub 7-0:1.0: 2 ports detected
[    0.617965] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.617971] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.617991] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f900
[    0.618032] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    0.618035] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.618037] usb usb8: Product: UHCI Host Controller
[    0.618039] usb usb8: Manufacturer: Linux 3.13.0-126-generic uhci_hcd
[    0.618041] usb usb8: SerialNumber: 0000:00:1d.2
[    0.618121] hub 8-0:1.0: USB hub found
[    0.618127] hub 8-0:1.0: 2 ports detected
[    0.618248] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.618603] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.618611] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.618779] mousedev: PS/2 mouse device common for all mice
[    0.618976] rtc_cmos 00:03: RTC can wake from S4
[    0.619116] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.619145] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.619227] device-mapper: uevent: version 1.0.3
[    0.619319] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[    0.619329] ledtrig-cpu: registered to indicate activity on CPUs
[    0.619444] TCP: cubic registered
[    0.619545] NET: Registered protocol family 10
[    0.619722] NET: Registered protocol family 17
[    0.619734] Key type dns_resolver registered
[    0.620047] Loading compiled-in X.509 certificates
[    0.621184] Loaded X.509 cert 'Magrathea: Glacier signing key: 09753d44bbb5f637d45540d4667fd16b6a4003ca'
[    0.621199] registered taskstats version 1
[    0.623833] Key type trusted registered
[    0.627693] Key type encrypted registered
[    0.627698] AppArmor: AppArmor sha1 policy hashing enabled
[    0.627701] IMA: No TPM chip found, activating TPM-bypass!
[    0.627965] regulator-dummy: disabling
[    0.628024]   Magic number: 13:395:192
[    0.628097] acpi device:1e: hash matches
[    0.628163] rtc_cmos 00:03: setting system clock to 2017-08-10 19:10:21 UTC (1502392221)
[    0.628781] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.628783] EDD information not available.
[    0.628811] PM: Hibernation image not present or could not be loaded.
[    0.914657] ata4: SATA link down (SStatus 0 SControl 300)
[    1.068058] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.076139] ata3.00: ATAPI: TSSTcorpDVD-ROM TS-H353B, D200, max UDMA/33
[    1.092136] ata3.00: configured for UDMA/33
[    1.152033] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.285172] usb 2-2: New USB device found, idVendor=1058, idProduct=10b8
[    1.285177] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[    1.285181] usb 2-2: Product: Elements 10B8
[    1.285184] usb 2-2: Manufacturer: Western Digital
[    1.285187] usb 2-2: SerialNumber: 57583431413934335343594E
[    1.380076] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.380089] ata2.01: SATA link down (SStatus 0 SControl 300)
[    1.380100] ata2.01: link offline, clearing class 3 to NONE
[    1.380239] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.380250] ata1.01: SATA link down (SStatus 0 SControl 300)
[    1.388290] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-H653B, D300, max UDMA/100
[    1.388293] ata2.00: applying bridge limits
[    1.396021] usb 2-3: new high-speed USB device number 4 using ehci-pci
[    1.403058] ata1.00: ATA-8: WDC WD6400AAKS-75A7B0, 01.03B01, max UDMA/133
[    1.403062] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.404137] ata2.00: configured for UDMA/100
[    1.409118] ata1.00: configured for UDMA/133
[    1.409251] scsi 0:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-7 01.0 PQ: 0 ANSI: 5
[    1.409417] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.409434] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    1.409544] sd 0:0:0:0: [sda] Write Protect is off
[    1.409547] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.409582] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.410255] scsi 1:0:0:0: CD-ROM            TSSTcorp DVD+-RW TS-H653B D300 PQ: 0 ANSI: 5
[    1.412834] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    1.412838] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.412965] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.413042] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.414247] scsi 2:0:0:0: CD-ROM            TSSTcorp DVD-ROM TS-H353B D200 PQ: 0 ANSI: 5
[    1.416472] sr1: scsi3-mmc drive: 4x/48x cd/rw xa/form2 cdda tray
[    1.416579] sr 2:0:0:0: Attached scsi CD-ROM sr1
[    1.416645] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    1.450581]  sda: sda1 sda2 sda3
[    1.450927] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.452454] Freeing unused kernel memory: 1340K (ffffffff81d20000 - ffffffff81e6f000)
[    1.452457] Write protecting the kernel read-only data: 12288k
[    1.452869] Freeing unused kernel memory: 748K (ffff880001745000 - ffff880001800000)
[    1.454733] Freeing unused kernel memory: 672K (ffff880001b58000 - ffff880001c00000)
[    1.477591] systemd-udevd[142]: starting version 204
[    1.499154] pps_core: LinuxPPS API ver. 1 registered
[    1.499157] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.501586] PTP clock support registered
[    1.509330] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.509333] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.509586] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.509605] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[    1.515714] FDC 0 is a post-1991 82077
[    1.530301] usb 2-3: New USB device found, idVendor=1058, idProduct=0830
[    1.530307] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[    1.530311] usb 2-3: Product: My Passport 0830
[    1.530314] usb 2-3: Manufacturer: Western Digital
[    1.530317] usb 2-3: SerialNumber: 575837314536343130595759
[    1.532068] tsc: Refined TSC clocksource calibration: 2393.999 MHz
[    1.640031] usb 2-4: new high-speed USB device number 5 using ehci-pci
[    1.683790] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:21:9b:03:b8:5d
[    1.683794] e1000e 0000:00:19.0 eth0: Intel(R) PRO/10/100 Network Connection
[    1.683816] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 7, PBA No: FFFFFF-0FF
[    1.853175] usb 2-4: New USB device found, idVendor=1058, idProduct=259f
[    1.853180] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.853184] usb 2-4: Product: My Passport 259F
[    1.853187] usb 2-4: Manufacturer: Western Digital
[    1.853190] usb 2-4: SerialNumber: 5758473141363635484E4E38
[    1.916395] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[    1.916398] EXT4-fs (sda1): write access will be enabled during recovery
[    1.964212] usb 2-5: new high-speed USB device number 6 using ehci-pci
[    2.154429] usb 2-5: New USB device found, idVendor=0644, idProduct=0200
[    2.154435] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.154439] usb 2-5: Product: CA-200
[    2.154442] usb 2-5: Manufacturer: TEAC
[    2.154445] usb 2-5: SerialNumber: 000008011C90
[    2.158719] usb-storage 2-2:1.0: USB Mass Storage device detected
[    2.158820] scsi4 : usb-storage 2-2:1.0
[    2.158897] usb-storage 2-3:1.0: USB Mass Storage device detected
[    2.158978] scsi5 : usb-storage 2-3:1.0
[    2.159060] usb-storage 2-4:1.0: USB Mass Storage device detected
[    2.159130] scsi6 : usb-storage 2-4:1.0
[    2.159209] usb-storage 2-5:1.0: USB Mass Storage device detected
[    2.159279] scsi7 : usb-storage 2-5:1.0
[    2.159352] usbcore: registered new interface driver usb-storage
[    2.392045] usb 6-1: new low-speed USB device number 2 using uhci_hcd
[    2.532164] Switched to clocksource tsc
[    2.574442] usb 6-1: New USB device found, idVendor=045e, idProduct=0040
[    2.574447] usb 6-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[    2.574450] usb 6-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM)
[    2.574454] usb 6-1: Manufacturer: Microsoft
[    2.580669] hidraw: raw HID events driver (C) Jiri Kosina
[    2.597734] usbcore: registered new interface driver usbhid
[    2.597737] usbhid: USB HID core driver
[    2.599498] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input5
[    2.599627] hid-generic 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1/input0
[    2.816022] usb 5-2: new low-speed USB device number 2 using uhci_hcd
[    2.992138] usb 5-2: New USB device found, idVendor=1a2c, idProduct=0e24
[    2.992144] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.992148] usb 5-2: Product: USB Keyboard
[    2.992151] usb 5-2: Manufacturer: SEM
[    3.008624] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/input/input6
[    3.008727] hid-generic 0003:1A2C:0E24.0002: input,hidraw1: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:1a.2-2/input0
[    3.032234] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/input/input7
[    3.032368] hid-generic 0003:1A2C:0E24.0003: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:1a.2-2/input1
[    3.048643] EXT4-fs (sda1): orphan cleanup on readonly fs
[    3.156569] scsi 4:0:0:0: Direct-Access     WD       Elements 10B8    1012 PQ: 0 ANSI: 6
[    3.156709] scsi 6:0:0:0: Direct-Access     WD       My Passport 259F 1014 PQ: 0 ANSI: 6
[    3.156828] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    3.157053] scsi 5:0:0:0: Direct-Access     WD       My Passport 0830 1065 PQ: 0 ANSI: 6
[    3.157326] scsi 6:0:0:1: Enclosure         WD       SES Device       1014 PQ: 0 ANSI: 6
[    3.157599] sd 4:0:0:0: [sdb] 3906963456 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    3.157630] sd 6:0:0:0: Attached scsi generic sg4 type 0
[    3.157764] scsi 6:0:0:1: Attached scsi generic sg5 type 13
[    3.157827] scsi 5:0:0:1: Enclosure         WD       SES Device       1065 PQ: 0 ANSI: 6
[    3.158228] sd 5:0:0:0: Attached scsi generic sg6 type 0
[    3.158411] scsi 5:0:0:1: Attached scsi generic sg7 type 13
[    3.158563] sd 6:0:0:0: [sdc] 3906963456 512-byte logical blocks: (2.00 TB/1.81 TiB)
[    3.159051] sd 5:0:0:0: [sdd] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB)
[    3.159932] sd 6:0:0:0: [sdc] Write Protect is off
[    3.159936] sd 6:0:0:0: [sdc] Mode Sense: 47 00 10 08
[    3.160550] sd 5:0:0:0: [sdd] Write Protect is off
[    3.160554] sd 5:0:0:0: [sdd] Mode Sense: 53 00 10 08
[    3.160969] sd 4:0:0:0: [sdb] Write Protect is off
[    3.160973] sd 4:0:0:0: [sdb] Mode Sense: 47 00 10 08
[    3.161216] sd 6:0:0:0: [sdc] No Caching mode page found
[    3.161219] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    3.161936] sd 5:0:0:0: [sdd] No Caching mode page found
[    3.161940] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[    3.162433] sd 4:0:0:0: [sdb] No Caching mode page found
[    3.162437] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    3.165805] sd 4:0:0:0: [sdb] No Caching mode page found
[    3.165810] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    3.166342] random: nonblocking pool is initialized
[    3.166372]  sdb: sdb1
[    3.166400] sd 5:0:0:0: [sdd] No Caching mode page found
[    3.166404] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[    3.166443] scsi 7:0:0:0: Direct-Access     TEAC     USB   HS-CF Card 4.08 PQ: 0 ANSI: 0
[    3.167933] sd 6:0:0:0: [sdc] No Caching mode page found
[    3.167936] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    3.169934] sd 4:0:0:0: [sdb] No Caching mode page found
[    3.169939] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[    3.169944] sd 4:0:0:0: [sdb] Attached SCSI disk
[    3.170194] scsi 7:0:0:1: Direct-Access     TEAC     USB   HS-xD/SM   4.08 PQ: 0 ANSI: 0
[    3.173815] scsi 7:0:0:2: Direct-Access     TEAC     USB   HS-MS Card 4.08 PQ: 0 ANSI: 0
[    3.177182] scsi 7:0:0:3: Direct-Access     TEAC     USB   HS-SD Card 4.08 PQ: 0 ANSI: 0
[    3.185182] sd 7:0:0:0: [sde] Attached SCSI removable disk
[    3.207489] EXT4-fs (sda1): 21 orphan inodes deleted
[    3.207493] EXT4-fs (sda1): recovery complete
[    3.398484] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.579590]  sdc: sdc1
[    3.582552] sd 6:0:0:0: [sdc] No Caching mode page found
[    3.582557] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[    3.582562] sd 6:0:0:0: [sdc] Attached SCSI disk
[    7.987986]  sdd: sdd1
[    7.989566] scsi 5:0:0:1: Wrong diagnostic page; asked for 1 got 0
[    7.989571] scsi 5:0:0:1: Failed to get diagnostic page 0xffffffea
[    7.989575] scsi 5:0:0:1: Failed to bind enclosure -19
[    7.989615] ses 6:0:0:1: Attached Enclosure device
[    7.989635] ses 5:0:0:1: Attached Enclosure device
[    7.989678] sd 7:0:0:0: Attached scsi generic sg8 type 0
[    7.989877] sd 7:0:0:1: Attached scsi generic sg9 type 0
[    7.990014] sd 7:0:0:2: Attached scsi generic sg10 type 0
[    7.990131] sd 7:0:0:3: Attached scsi generic sg11 type 0
[    7.992938] sd 5:0:0:0: [sdd] No Caching mode page found
[    7.992943] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[    7.992948] sd 5:0:0:0: [sdd] Attached SCSI disk
[    8.021309] sd 7:0:0:1: [sdf] Attached SCSI removable disk
[    8.026059] sd 7:0:0:2: [sdg] Attached SCSI removable disk
[    8.030182] sd 7:0:0:3: [sdh] Attached SCSI removable disk
[   18.528766] Adding 511996k swap on /dev/sda2.  Priority:-1 extents:1 across:511996k FS
[   20.740021] systemd-udevd[371]: starting version 204
[   21.583885] lp: driver loaded but no devices found
[   21.713570] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   21.714933] coretemp coretemp.0: Using relative temperature scale!
[   21.714944] coretemp coretemp.0: Using relative temperature scale!
[   21.714955] coretemp coretemp.0: Using relative temperature scale!
[   21.714966] coretemp coretemp.0: Using relative temperature scale!
[   21.807733] it87: Found IT8718F chip at 0x290, revision 3
[   21.807785] ACPI Warning: 0x0000000000000295-0x0000000000000296 SystemIO conflicts with Region \IP__ 1 (20131115/utaddress-251)
[   21.807792] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.829074] it87: Found IT8718F chip at 0x290, revision 3
[   21.829128] ACPI Warning: 0x0000000000000295-0x0000000000000296 SystemIO conflicts with Region \IP__ 1 (20131115/utaddress-251)
[   21.829135] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.848683] it87: Found IT8718F chip at 0x290, revision 3
[   21.848721] ACPI Warning: 0x0000000000000295-0x0000000000000296 SystemIO conflicts with Region \IP__ 1 (20131115/utaddress-251)
[   21.848726] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   21.908102] ppdev: user-space parallel port driver
[   23.418302] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   23.454537] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PM2S 1 (20131115/utaddress-251)
[   23.454544] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   23.454547] ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \GPO2 1 (20131115/utaddress-251)
[   23.454551] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   23.454553] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPO_ 1 (20131115/utaddress-251)
[   23.454556] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   23.454557] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   23.876698] device-mapper: multipath: version 1.6.0 loaded
[   24.225001] [drm] Initialized drm 1.1.0 20060810
[   24.289874] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   24.923294] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[   25.059089] ip_tables: (C) 2000-2006 Netfilter Core Team
[   25.069501] SKU: Nid=0x1d sku_cfg=0x4014a601
[   25.069505] SKU: port_connectivity=0x1
[   25.069506] SKU: enable_pcbeep=0x1
[   25.069508] SKU: check_sum=0x00000004
[   25.069509] SKU: customization=0x000000a6
[   25.069510] SKU: external_amp=0x0
[   25.069511] SKU: platform_type=0x0
[   25.069513] SKU: swap=0x0
[   25.069514] SKU: override=0x1
[   25.070118] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   25.070121]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   25.070123]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   25.070124]    mono: mono_out=0x0
[   25.070125]    inputs:
[   25.070127]      Front Mic=0x19
[   25.070129]      Rear Mic=0x18
[   25.070131]      Line=0x1a
[   25.070132] realtek: No valid SSID, checking pincfg 0x4014a601 for NID 0x1d
[   25.070134] realtek: Enabling init ASM_ID=0xa601 CODEC_ID=10ec0888
[   25.081197] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   25.081317] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   25.081387] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   25.081469] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   25.081538] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   25.081614] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   25.081715] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   25.081794] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   25.082164] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   25.082170] hda-intel 0000:01:00.1: Using LPIB position fix
[   25.082208] snd_hda_intel 0000:01:00.1: irq 43 for MSI/MSI-X
[   25.084561] hda-intel 0000:01:00.1: Enable sync_write for stable communication
[   25.137111] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   25.147143] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[   25.264804] [drm] radeon kernel modesetting enabled.
[   25.264865] checking generic (d0000000 5b0000) vs hw (d0000000 10000000)
[   25.264867] fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
[   25.264917] Console: switching to colour dummy device 80x25
[   25.265314] [drm] initializing kernel modesetting (RV635 0x1002:0x9598 0x1028:0x2242).
[   25.265330] [drm] register mmio base: 0xFDDE0000
[   25.265332] [drm] register mmio size: 65536
[   25.265473] ATOM BIOS: RV635
[   25.265489] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[   25.265492] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[   25.265493] [drm] Detected VRAM RAM=256M, BAR=256M
[   25.265495] [drm] RAM width 128bits DDR
[   25.265564] [TTM] Zone  kernel: Available graphics memory: 4022118 kiB
[   25.265567] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   25.265569] [TTM] Initializing pool allocator
[   25.265573] [TTM] Initializing DMA pool allocator
[   25.265602] [drm] radeon: 256M of VRAM memory ready
[   25.265604] [drm] radeon: 512M of GTT memory ready.
[   25.265620] [drm] Loading RV635 Microcode
[   25.581634] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   25.876087] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   25.891435] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[   25.891477] radeon 0000:01:00.0: WB enabled
[   25.891481] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffff8800c58ecc00
[   25.891484] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000010000c0c and cpu addr 0xffff8800c58ecc0c
[   25.891486] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   25.891487] [drm] Driver supports precise vblank timestamp query.
[   25.891489] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[   25.891512] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
[   25.891526] radeon 0000:01:00.0: radeon: using MSI.
[   25.891550] [drm] radeon: irq initialized.
[   25.923003] [drm] ring test on 0 succeeded in 1 usecs
[   25.923010] [drm] ring test on 3 succeeded in 2 usecs
[   25.923341] [drm] Enabling audio 0 support
[   25.923368] [drm] ib test on ring 0 succeeded in 0 usecs
[   25.923384] HDMI ATI/AMD: no speaker allocation for ELD
[   25.923389] [drm] ib test on ring 3 succeeded in 0 usecs
[   25.923833] [drm] Radeon Display Connectors
[   25.923835] [drm] Connector 0:
[   25.923837] [drm]   HDMI-A-1
[   25.923838] [drm]   HPD1
[   25.923840] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[   25.923841] [drm]   Encoders:
[   25.923842] [drm]     DFP1: INTERNAL_UNIPHY
[   25.923844] [drm] Connector 1:
[   25.923845] [drm]   DP-1
[   25.923846] [drm]   HPD3
[   25.923848] [drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[   25.923849] [drm]   Encoders:
[   25.923850] [drm]     DFP2: INTERNAL_UNIPHY
[   25.923852] [drm] Connector 2:
[   25.923853] [drm]   DVI-I-1
[   25.923854] [drm]   HPD2
[   25.923860] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[   25.923862] [drm]   Encoders:
[   25.923863] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   25.923864] [drm]     DFP3: INTERNAL_KLDSCP_LVTMA
[   25.923949] [drm] Internal thermal controller with fan control
[   25.923991] == power state 0 ==
[   25.923993] 	ui class: none
[   25.923995] 	internal class: boot 
[   25.923997] 	caps: video 
[   25.923999] 	uvd    vclk: 0 dclk: 0
[   25.924000] 		power level 0    sclk: 72500 mclk: 50000 vddc: 1250
[   25.924012] 		power level 1    sclk: 72500 mclk: 50000 vddc: 1250
[   25.924013] 		power level 2    sclk: 72500 mclk: 50000 vddc: 1250
[   25.924015] 	status: c r b 
[   25.924017] == power state 1 ==
[   25.924018] 	ui class: performance
[   25.924019] 	internal class: none
[   25.924021] 	caps: single_disp video 
[   25.924024] 	uvd    vclk: 0 dclk: 0
[   25.924025] 		power level 0    sclk: 11000 mclk: 25200 vddc: 900
[   25.924027] 		power level 1    sclk: 30000 mclk: 40000 vddc: 1000
[   25.924028] 		power level 2    sclk: 72500 mclk: 50000 vddc: 1250
[   25.924029] 	status: 
[   25.924031] == power state 2 ==
[   25.924032] 	ui class: none
[   25.924033] 	internal class: uvd 
[   25.924035] 	caps: video 
[   25.924037] 	uvd    vclk: 40000 dclk: 30000
[   25.924039] 		power level 0    sclk: 60000 mclk: 50000 vddc: 1150
[   25.924040] 		power level 1    sclk: 60000 mclk: 50000 vddc: 1150
[   25.924042] 		power level 2    sclk: 60000 mclk: 50000 vddc: 1150
[   25.924043] 	status: 
[   25.924044] == power state 3 ==
[   25.924045] 	ui class: performance
[   25.924046] 	internal class: none
[   25.924048] 	caps: video 
[   25.924050] 	uvd    vclk: 0 dclk: 0
[   25.924051] 		power level 0    sclk: 30000 mclk: 50000 vddc: 1250
[   25.924053] 		power level 1    sclk: 30000 mclk: 50000 vddc: 1250
[   25.924054] 		power level 2    sclk: 72500 mclk: 50000 vddc: 1250
[   25.924056] 	status: 
[   25.924286] switching from power state:
[   25.924287] 	ui class: none
[   25.924289] 	internal class: boot 
[   25.924290] 	caps: video 
[   25.924293] 	uvd    vclk: 0 dclk: 0
[   25.924294] 		power level 0    sclk: 72500 mclk: 50000 vddc: 1250
[   25.924296] 		power level 1    sclk: 72500 mclk: 50000 vddc: 1250
[   25.924297] 		power level 2    sclk: 72500 mclk: 50000 vddc: 1250
[   25.924298] 	status: c b 
[   25.924300] switching to power state:
[   25.924301] 	ui class: performance
[   25.924302] 	internal class: none
[   25.924304] 	caps: single_disp video 
[   25.924307] 	uvd    vclk: 0 dclk: 0
[   25.924308] 		power level 0    sclk: 11000 mclk: 25200 vddc: 900
[   25.924310] 		power level 1    sclk: 30000 mclk: 40000 vddc: 1000
[   25.924311] 		power level 2    sclk: 72500 mclk: 50000 vddc: 1250
[   25.924312] 	status: r 
[   26.220045] HDMI ATI/AMD: no speaker allocation for ELD
[   26.415230] type=1400 audit(1502392247.282:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=596 comm="apparmor_parser"
[   26.415238] type=1400 audit(1502392247.282:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=596 comm="apparmor_parser"
[   26.415243] type=1400 audit(1502392247.282:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=596 comm="apparmor_parser"
[   26.415292] type=1400 audit(1502392247.282:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=595 comm="apparmor_parser"
[   26.415303] type=1400 audit(1502392247.282:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=595 comm="apparmor_parser"
[   26.415308] type=1400 audit(1502392247.282:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=595 comm="apparmor_parser"
[   26.481252] [drm] radeon: dpm initialized
[   26.520040] HDMI ATI/AMD: no speaker allocation for ELD
[   26.595775] [drm] fb mappable at 0xD0141000
[   26.595777] [drm] vram apper at 0xD0000000
[   26.595779] [drm] size 8294400
[   26.595780] [drm] fb depth is 24
[   26.595781] [drm]    pitch is 7680
[   26.595870] fbcon: radeondrmfb (fb0) is primary device
[   26.596907] switching from power state:
[   26.596909] 	ui class: performance
[   26.596910] 	internal class: none
[   26.596912] 	caps: single_disp video 
[   26.596912] 	uvd    vclk: 0 dclk: 0
[   26.596914] 		power level 0    sclk: 11000 mclk: 25200 vddc: 900
[   26.596914] 		power level 1    sclk: 30000 mclk: 40000 vddc: 1000
[   26.596915] 		power level 2    sclk: 72500 mclk: 50000 vddc: 1250
[   26.596916] 	status: c 
[   26.596917] switching to power state:
[   26.596917] 	ui class: performance
[   26.596918] 	internal class: none
[   26.596919] 	caps: video 
[   26.596920] 	uvd    vclk: 0 dclk: 0
[   26.596921] 		power level 0    sclk: 30000 mclk: 50000 vddc: 1250
[   26.596922] 		power level 1    sclk: 30000 mclk: 50000 vddc: 1250
[   26.596922] 		power level 2    sclk: 72500 mclk: 50000 vddc: 1250
[   26.596923] 	status: r 
[   26.820045] HDMI ATI/AMD: no speaker allocation for ELD
[   26.997878] init: Failed to obtain startpar-bridge instance: Unknown parameter: INSTANCE
[   27.036358] Console: switching to colour frame buffer device 160x64
[   27.039727] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   27.039729] radeon 0000:01:00.0: registered panic notifier
[   27.039735] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
[   27.120055] HDMI ATI/AMD: no speaker allocation for ELD
[   27.424037] HDMI ATI/AMD: no speaker allocation for ELD
[   27.724042] HDMI ATI/AMD: no speaker allocation for ELD
[   28.024055] HDMI ATI/AMD: no speaker allocation for ELD
[   28.324050] HDMI ATI/AMD: no speaker allocation for ELD
[   37.668367] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   40.282515] FS-Cache: Loaded
[   40.341208] RPC: Registered named UNIX socket transport module.
[   40.341212] RPC: Registered udp transport module.
[   40.341213] RPC: Registered tcp transport module.
[   40.341215] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   40.374925] init: failsafe main process (877) killed by TERM signal
[   40.529800] FS-Cache: Netfs 'nfs' registered for caching
[   40.933918] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   43.924185] Bluetooth: Core ver 2.17
[   43.924204] NET: Registered protocol family 31
[   43.924206] Bluetooth: HCI device and connection manager initialized
[   43.924217] Bluetooth: HCI socket layer initialized
[   43.924219] Bluetooth: L2CAP socket layer initialized
[   43.924224] Bluetooth: SCO socket layer initialized
[   43.967429] type=1400 audit(1502392264.834:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1018 comm="apparmor_parser"
[   43.967437] type=1400 audit(1502392264.834:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1018 comm="apparmor_parser"
[   44.045588] init: cups main process (1036) killed by HUP signal
[   44.045600] init: cups main process ended, respawning
[   44.062574] Bluetooth: RFCOMM TTY layer initialized
[   44.062594] Bluetooth: RFCOMM socket layer initialized
[   44.062602] Bluetooth: RFCOMM ver 1.11
[   44.350144] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   44.350148] Bluetooth: BNEP filters: protocol multicast
[   44.350160] Bluetooth: BNEP socket layer initialized
[   46.535156] type=1400 audit(1502392267.402:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1138 comm="apparmor_parser"
[   46.535167] type=1400 audit(1502392267.402:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1138 comm="apparmor_parser"
[   46.535172] type=1400 audit(1502392267.402:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1138 comm="apparmor_parser"
[   46.828725] type=1400 audit(1502392267.698:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1142 comm="apparmor_parser"
[   46.831604] type=1400 audit(1502392267.698:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1143 comm="apparmor_parser"
[   46.831615] type=1400 audit(1502392267.698:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1143 comm="apparmor_parser"
[   46.953810] type=1400 audit(1502392267.822:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1137 comm="apparmor_parser"
[   46.953818] type=1400 audit(1502392267.822:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=1137 comm="apparmor_parser"
[   47.199949] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[   47.300102] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[   47.300225] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   48.637589] zram: module is from the staging directory, the quality is unknown, you have been warned.
[   48.638405] zram: Created 4 device(s) ...
[   48.665471] init: samba-ad-dc main process (1121) terminated with status 1
[   48.872228] Adding 1005528k swap on /dev/zram0.  Priority:5 extents:1 across:1005528k SSFS
[   48.877931] Adding 1005528k swap on /dev/zram1.  Priority:5 extents:1 across:1005528k SSFS
[   48.884446] Adding 1005528k swap on /dev/zram2.  Priority:5 extents:1 across:1005528k SSFS
[   48.888941] Adding 1005528k swap on /dev/zram3.  Priority:5 extents:1 across:1005528k SSFS
[   50.488824] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[   50.488830] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
[   50.488862] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   56.025635] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[   56.418148] init: plymouth-upstart-bridge main process ended, respawning
[   56.492059] init: plymouth-upstart-bridge main process ended, respawning
[   74.038761] audit_printk_skb: 45 callbacks suppressed
[   74.038765] type=1400 audit(1502392296.481:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2477 comm="apparmor_parser"
[   74.038774] type=1400 audit(1502392296.481:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2477 comm="apparmor_parser"
[   84.851896] init: plymouth-stop pre-start process (2594) terminated with status 1
[   97.613544] EXT4-fs (sdb1): recovery complete
[   97.614096] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[  100.612520] EXT4-fs (sdc1): recovery complete
[  100.613109] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[  134.241343] systemd-hostnamed[4279]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!

Ubuntu 16.04 - Noyau 4.10.0-35.39
Intel® Core™ i7-7700K CPU @ 4.20GHz × 8
RAM 16 Go
GeForce GTX 1070/PCIe/SSE2

Hors ligne

#11 Le 10/08/2017, à 22:24

senacle

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

Ca recommence mad

J'avais plusieurs trucs ouverts (1 chrome avec un jeu flash, 2 firefox, 1 gedit, 1 terminal, 1 vlc) et hop, redémarrage sans prévenir.
Je relance tout, histoire de vérifier, pareil au bout de moins de 5 minutes, reboot.
Je relance tout, sauf vlc. Puis je ferme tout et je lance vlc. Reboot au bout de 10-15 minutes.
La température reste à peu près au même niveau à chaque fois : 81-82°C.

Ce serait vlc ?
Pas sûr, car lors des reboot en pleine nuit qui se sont produits les jours précédents, rien n'était ouvert.
Ca commence à devenir compliqué à cerner.

Dernière modification par senacle (Le 10/08/2017, à 22:26)


Ubuntu 16.04 - Noyau 4.10.0-35.39
Intel® Core™ i7-7700K CPU @ 4.20GHz × 8
RAM 16 Go
GeForce GTX 1070/PCIe/SSE2

Hors ligne

#12 Le 11/08/2017, à 13:21

ublender

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

Je vois que tu as zram d'installé, peux tu donner le retour de

free -h

Il y a

EXT4-fs (sdb1): recovery complete

Peux tu donner le retour de

sudo apt-install smartmontools
sudo smartctl --smart=on --offlineauto=on --saveauto=on /dev/sdX
sudo smartctl -a /dev/sdX

où /dev/sdX est à remplacer par ton disque dur qui contient l'installation d'ubuntu. Tu as combien de disques?
Je vois rien pour la température de ta carte graphique dans le retour de dmesg.

Hors ligne

#13 Le 11/08/2017, à 20:02

senacle

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

Pour la RAM

             total       used       free     shared    buffers     cached
Mem:          7,7G       5,4G       2,2G       206M       287M       2,0G
-/+ tampons/cache:       3,2G       4,5G
Partition d'échange:       4,3G         0B       4,3G

Pour le disque (sda1)
sudo apt-get install smartmontools

smartmontools est déjà la plus récente version disponible.
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
SMART Attribute Autosave Enabled.
SMART Automatic Offline Testing Enabled every four hours.
=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar Blue (SATA)
Device Model:     WDC WD6400AAKS-75A7B0
Serial Number:    WD-WMASY1957037
LU WWN Device Id: 5 0014ee 0560de9a9
Firmware Version: 01.03B01
User Capacity:    640 135 028 736 bytes [640 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.5, 3.0 Gb/s
Local Time is:    Fri Aug 11 20:40:14 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84)	Offline data collection activity
					was suspended by an interrupting command from host.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(11160) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 ( 131) minutes.
Conveyance self-test routine
recommended polling time: 	 (   5) minutes.
SCT capabilities: 	       (0x303f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   155   155   021    Pre-fail  Always       -       5216
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       432
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   051    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   010   010   000    Old_age   Always       -       65788
 10 Spin_Retry_Count        0x0032   100   100   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   051    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       432
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       314
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       432
194 Temperature_Celsius     0x0022   109   104   000    Old_age   Always       -       38
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   051    Old_age   Offline      -       0
240 Head_Flying_Hours       0x0032   016   016   000    Old_age   Always       -       61884
241 Total_LBAs_Written      0x0032   200   200   000    Old_age   Always       -       31955212117
242 Total_LBAs_Read         0x0032   200   200   000    Old_age   Always       -       174492904518

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
ublender a écrit :

Tu as combien de disques?

Un seul disque interne

ublender a écrit :

Je vois rien pour la température de ta carte graphique dans le retour de dmesg.

Je récupère la température avec la commande

sensors
acpitz-virtual-0
Adapter: Virtual device
temp1:        +40.0°C  (crit = +120.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +59.0°C  (high = +82.0°C, crit = +100.0°C)
Core 1:       +57.0°C  (high = +82.0°C, crit = +100.0°C)
Core 2:       +52.0°C  (high = +82.0°C, crit = +100.0°C)
Core 3:       +54.0°C  (high = +82.0°C, crit = +100.0°C)

radeon-pci-0100
Adapter: PCI adapter
temp1:        +81.0°C  (crit = +120.0°C, hyst = +90.0°C)

Dernière modification par senacle (Le 11/08/2017, à 20:41)


Ubuntu 16.04 - Noyau 4.10.0-35.39
Intel® Core™ i7-7700K CPU @ 4.20GHz × 8
RAM 16 Go
GeForce GTX 1070/PCIe/SSE2

Hors ligne

#14 Le 11/08/2017, à 23:08

ublender

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

Avec 8 Go de ram, tu devrais pas avoir besoin de zram. Tu as pas mal de programmes qui tournent visiblement pour 5.4 Go occupés.
Le disque dur a l'air d'aller bien, donc en particulier les plantages viennent pas d'un disque défectueux.
Tente de faire des tests de ram, ça éliminera ce cas (c'est dans le menu grub, il faut appuyer sur shift au démarrage du pc dans le cas où tu n'as pas de dualboot)

Dernière modification par ublender (Le 11/08/2017, à 23:09)

Hors ligne

#15 Le 13/08/2017, à 11:10

senacle

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

ublender a écrit :

Avec 8 Go de ram, tu devrais pas avoir besoin de zram.

zram retiré.

ublender a écrit :

Tu as pas mal de programmes qui tournent visiblement pour 5.4 Go occupés.

C'est lorsque je vais sur le jeu flash avec le navigateur.
Pas trop d'utilisation de RAM en dehors de ça.

ublender a écrit :

Tente de faire des tests de ram, ça éliminera ce cas (c'est dans le menu grub, il faut appuyer sur shift au démarrage du pc dans le cas où tu n'as pas de dualboot)

RAS de ce côté.



Depuis hier matin, j'ai mis la nouvelle carte graphique.
Les problèmes sont les mêmes : reboot ou gel écran.
J'ai aussi eu à un moment une charge processeur importante liée à compiz.
Je ne l'avais pas avant.
J'ai réinitialisé compiz : charge processeur OK et la température du GPU est retombé vers 70°C.
Je suis même à 67°C avec seulement Firefox ouvert (où je rédige ce message en ce moment).
J'ai tenté aussi de stresser ma carte graphique, histoire de vérifier si ça vient de là.
GpuTest ok
Phronix Test suite : plusieurs tests sont passés, un a fini par geler l'écran.


J'ai commencé à lister les situations qui posent problème.
A priori, c'est lié aux vidéos : le plantage se produit avec vlc qui lit une vidéo (la télé ou une vidéo sur disque dur), et avec un navigateur (Firefox, Chrome, Chromium) lorsque je vais sur le site de jeu flash.
J'ai même lancé le CD d'installation d'Ubuntu 16.04 et lancé firefox + site de jeu ==> plantage.

Je tente l'installation des pilotes propriétaires ATI.

Dernière modification par senacle (Le 13/08/2017, à 11:15)


Ubuntu 16.04 - Noyau 4.10.0-35.39
Intel® Core™ i7-7700K CPU @ 4.20GHz × 8
RAM 16 Go
GeForce GTX 1070/PCIe/SSE2

Hors ligne

#16 Le 13/08/2017, à 21:07

senacle

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

Avec le pilote propriétaire, ça va mieux, mais c'est pas encore complètement résolu.

Bilan de la journée

  • vlc vidéo locale + firefox + chromium jeu flash +  moniteur système + téléchargement : OK pendant quelques heures

  • vlc vidéo locale + firefox + chromium jeu flash +  moniteur système + téléchargement + tests avec GPUtest : OK (au passage, j'ai pu faire des tests que je ne pouvais pas avec le pilote libre)

  • vlc vidéo locale + firefox + chromium jeu flash +  moniteur système + téléchargement + tests gfx_bench : OK les 2 premiers, puis reboot

  • firefox + téléchargement unigine + téléchargement phoronix + terminal : OK

  • firefox + téléchargement unigine + téléchargement phoronix + terminal + vlc vidéo locale : reboot au bout de 5 minutes après lancement vlc

  • 2 chromium jeu flash + 2 terminaux + téléchargement phoronix : OK

  • 2 chromium jeu flash + 2 terminaux + téléchargement phoronix + navigation firefox : reboot au bout de 3-4H (un morceau de flash sur un site ???)

  • firefox seul : ok

  • 2 chromium (sans le jeu flash chargé) + firefox : gel écran, seule le curseur se déplaçait, clavier ne répond pas. Ici, cela s'est produit après que ma multiprise de protection est fait quelques cliquetis

  • nautilus + firefox : ça tient pour l'instant

Si vous trouvez un point commun à tout ça, ça m'aiderait bien smile


Ubuntu 16.04 - Noyau 4.10.0-35.39
Intel® Core™ i7-7700K CPU @ 4.20GHz × 8
RAM 16 Go
GeForce GTX 1070/PCIe/SSE2

Hors ligne

#17 Le 13/08/2017, à 21:48

ublender

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

Je suis même à 67°C avec seulement Firefox ouvert (où je rédige ce message en ce moment).

Ça c'est bien!

J'ai tenté aussi de stresser ma carte graphique, histoire de vérifier si ça vient de là.

J'ai pas compris.

Regarder une vidéo, c'est surtout solliciter la carte graphique. Donc forcément ça provoque des problèmes.

Attends, quand tu dis plantage, le pc s'éteint brutalement ou l'écran freeze?

Ici, cela s'est produit après que ma multiprise de protection est fait quelques cliquetis

Je ne sais pas trop quoi en penser.

Et sinon niveau température, c'est descendu?

Dernière modification par ublender (Le 13/08/2017, à 21:49)

Hors ligne

#18 Le 15/08/2017, à 10:48

senacle

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

ublender a écrit :

J'ai tenté aussi de stresser ma carte graphique, histoire de vérifier si ça vient de là.

J'ai pas compris.

J'ai lancé des tests avec les logiciels précités (GPUtest, gfx_bench, phoronix).
Plantage dans certains cas, ça passe pour d'autres.

ublender a écrit :

Regarder une vidéo, c'est surtout solliciter la carte graphique. Donc forcément ça provoque des problèmes.

Sans aucun doute, sauf que parfois, ça fonctionne correctement, d'autres, ça reboot.

ublender a écrit :

Attends, quand tu dis plantage, le pc s'éteint brutalement ou l'écran freeze?

Le plus souvent, le PC reboot.
Quelquefois, il y a gel de l'écran je dois appuyer sur le bouton marche/arrêt du PC pour l'arrêter.

ublender a écrit :

Ici, cela s'est produit après que ma multiprise de protection est fait quelques cliquetis

Je ne sais pas trop quoi en penser.

Sans doute aucun rapport, effectivement.

ublender a écrit :

Et sinon niveau température, c'est descendu?

Là, c'est 68°C avec seulement 1 firefox et 1 terminal ouverts (PC et aussi fenêtre ouverts, il ne fait pas trop chaud dehors).



Hier soir, tout s'est bien passé.
3 chromium jeu flash, puis 2 chromium jeu flash pendant 2-3H + vlc télé 2-3H : aucun gel ni reboot.
Ce matin, je constate pas de reboot dans la nuit.
J'ai donc espoir que c'est rentré dans l'ordre et puis patatra !

Je commence alors à faire plusieurs choses.
4 chromium jeu flash, puis 3, puis 2 puis 1 : ça tient 2H
Ensuite, 1 chromium jeu flash + 1 firefox : reboot !
Je recommence. 1 chromium jeu flash + 1 firefox : reboot en moins de 5 minutes !
Je recommence encore. 1 chromium jeu flash + 1 firefox : reboot en moins de 5 minutes !
Je recommence encore. 1 chromium jeu flash + 1 firefox : gel en moins de 2 minutes !
Je laisse refroidir 2 minutes.
Je recommence encore. 1 chromium jeu flash + 1 firefox : reboot en moins de 5 minutes !
Je recommence. 2 chromium jeu flash : reboot en moins de 5 minutes !
Maintenant, j'ai seulement 1 firefox et 1 terminal ouverts. Ca a l'air de tenir...pour l'instant.
J'ai ouvert vlc avec vision télé : reboot en moins de 5 minutes.

C'est vraiment à n'y plus rien comprendre. Vu la plantage de ce matin, ça aurait aussi dû planter hier soir, non ?

Dernière modification par senacle (Le 15/08/2017, à 11:11)


Ubuntu 16.04 - Noyau 4.10.0-35.39
Intel® Core™ i7-7700K CPU @ 4.20GHz × 8
RAM 16 Go
GeForce GTX 1070/PCIe/SSE2

Hors ligne

#19 Le 15/08/2017, à 11:03

moko138

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

senacle a écrit :

Ici, cela s'est produit après que ma multiprise de protection ait fait quelques cliquetis

/!\ COMMENCE par éliminer le problème électrique !


%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#20 Le 15/08/2017, à 11:09

senacle

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

moko138 a écrit :
senacle a écrit :

Ici, cela s'est produit après que ma multiprise de protection ait fait quelques cliquetis

/!\ COMMENCE par éliminer le problème électrique !

Ca n'arrive que très rarement.
Et ça se produisait aussi avant la mise à jour d'Ubuntu de fin juillet. Et avant cette mise à jour, je n'avais jamais ces problèmes de rebbot/gel.

Je vais quand même brancher sur une autre multiprise et refaire les essais chromium - vlc.

A de suite.

Dernière modification par senacle (Le 15/08/2017, à 11:13)


Ubuntu 16.04 - Noyau 4.10.0-35.39
Intel® Core™ i7-7700K CPU @ 4.20GHz × 8
RAM 16 Go
GeForce GTX 1070/PCIe/SSE2

Hors ligne

#21 Le 15/08/2017, à 11:13

moko138

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

senacle a écrit :
moko138 a écrit :
senacle a écrit :

Ici, cela s'est produit après que ma multiprise de protection ait fait quelques cliquetis

/!\ COMMENCE par éliminer le problème électrique !

Ca n'arrive que très rarement.

On s'en fout. Par contre,
/!\ COMMENCE par éliminer le problème électrique !


%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#22 Le 15/08/2017, à 11:24

senacle

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

moko138 a écrit :
senacle a écrit :
moko138 a écrit :

/!\ COMMENCE par éliminer le problème électrique !

Ca n'arrive que très rarement.

On s'en fout. Par contre,
/!\ COMMENCE par éliminer le problème électrique !

Et bien voilà, test non concluant.
J'ai branché sur une autre multiprise.
Lancement de vlc télé seul : ça a tenu moins de 2 minutes avant reboot.


Ubuntu 16.04 - Noyau 4.10.0-35.39
Intel® Core™ i7-7700K CPU @ 4.20GHz × 8
RAM 16 Go
GeForce GTX 1070/PCIe/SSE2

Hors ligne

#23 Le 15/08/2017, à 11:33

Sub0

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

moko138 a écrit :

/!\ COMMENCE par éliminer le problème électrique !

+10

senacle a écrit :

Et bien voilà, test non concluant.
J'ai branché sur une autre multiprise.

Pas un problème de « prise », un problème d’alimentation.

Ce genre de comportement erratique et radical, c’est souvent le signe d’un boitier d’alim défaillant.
PC qui freeze sans raison, extinction quand on tire sur la RAM ou le GPU, etc.
Le problème peut varier, mais on arrive parfois à reproduire, selon la tension électrique utilisée.

(il y a quelques mois, dès que je lançais ffmpeg ou que je foutais un gros fichier en tmpfs, bam !)

Dernière modification par Sub0 (Le 15/08/2017, à 11:36)


Seule alternative au bépo acceptée = stylo/papier.

Hors ligne

#24 Le 15/08/2017, à 11:42

moko138

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

senacle a écrit :

Et bien voilà, test non concluant.

Tu n'as rien éliminé :
Même en supposant que ton installation est en 230 V, nous ignorons :
- le courant au-dessus duquel le disjoncteur de la pièce où est ton pc disjoncte ;
- la puissance cumulée tirée par tous les appareils électriques sous tension dans cette pièce ;
- la puissance limite de tes deux prises multiples.

          AJOUT :
- ainsi que, comme dit Sub0, les caractéristiques de l'alimentation de ton pc.

Dernière modification par moko138 (Le 15/08/2017, à 11:46)


%NOINDEX%
Un utilitaire méconnu : ncdu

Hors ligne

#25 Le 15/08/2017, à 11:56

senacle

Re : Reboot, freeze (gel écran)... Qu'arrive-t-il ?

moko138 a écrit :
senacle a écrit :

Et bien voilà, test non concluant.

Tu n'as rien éliminé :
Même en supposant que ton installation est en 230 V, nous ignorons :
- le courant au-dessus duquel le disjoncteur de la pièce où est ton pc disjoncte ;
- la puissance cumulée tirée par tous les appareils électriques sous tension dans cette pièce ;
- la puissance limite de tes deux prises multiples.

          AJOUT :
- ainsi que, comme dit Sub0, les caractéristiques de l'alimentation de ton pc.

Je veux bien investiguer de ce côté, mais je n'ai eu aucun problème pendant des années.
L'équipement électrique n'a pas changé en juillet.

moko138 a écrit :

ton installation est en 230 V

Oui

moko138 a écrit :

le courant au-dessus duquel le disjoncteur de la pièce où est ton pc disjoncte ;

Je veux bien, mais ici, ce n'est que le PC qui reboot, ce n'est pas du côté du disjoncteur que ça se passe.

moko138 a écrit :

la puissance cumulée tirée par tous les appareils électriques sous tension dans cette pièce ;

PC + écran + radioréveil

moko138 a écrit :

la puissance limite de tes deux prises multiples.

2300W pour l'une, 1000W pour celle où tout est branché en ce moment.


Ubuntu 16.04 - Noyau 4.10.0-35.39
Intel® Core™ i7-7700K CPU @ 4.20GHz × 8
RAM 16 Go
GeForce GTX 1070/PCIe/SSE2

Hors ligne