Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 12/09/2017, à 10:06

CPascal

[Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

Bonjour tout le monde
très satisfait de ma Ubuntu studio 16.04 LTS je rencontre un vrai souci: avec la gestion des cartes graphiques. Pour l'internet la bureautique la MAO c’est parfait mais j'ai un souci net avec un driver pour la carte NVIDIA

possédant une NVIDIA GT 720 qui fonctionne très bien et que j'utilise avec lightworks fusion9 et resolve 14 je constate qu'il y a comme une sorte de conflit au démarrage qui se manifeste ainsi

- temps très long pour arriver au login
- l'OS mouline comme s'il "hésitait" entre les divers gestionnaires de cartes
- le logo est comme découpé au lancement (si je peux je mets une photo prise avec mon téléphone)
- driver Nvidia 375.66
- liste des drivers dispos:
nvidia 375.66
x org (nouveau )
nvidia 340.102

Au final ça fonctionne mais le temps de chargement est TRÈS long alors que mon pc est un hp prodesk avec 2 disques de 1TO 8 Go ram coreI5 : ce n’est pas normal.

Si ce souci pouvait être réglé je switcherais définitivement sous Linux, abandonnant win10 et même mac os (désaccord avec la "nouvelle" ligne directrice de cook). Donc c'est important pour moi mais il faut que ce soit parfait .

merci de votre aide smile

NB je suis navré du caractère très général de mon post mais je suis incapable de donner un nom plus précis a ce souci. par contre il y a un an car j'avais déjà testé Ubuntu studio, je n'avais pas ce problème disposant pourtant de la même carte.

Dernière modification par CPascal (Le 15/09/2017, à 22:35)


Ubuntu Studio 16.04.LTS/Harrison Mixbus|Reaper|Fusion|Lightworks

Hors ligne

#2 Le 13/09/2017, à 12:31

??

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

Bonjour

Pour tenter d'améliorer, as-tu bien activé le driver propriétaire et déactivé le driver de ubuntu  en modifiant la 11eme ligne du fichier /etc/default/grub pour qu'elle devienne

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash       modprobe.blacklist=nouveau   "

puis prise en en charge via la commande

sudo update-grub

Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#3 Le 13/09/2017, à 13:49

CPascal

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

merci il a blacklisté le nouveau smile
par contre ce brave ubuntu rame toujours au démarrage ; ma foi big_smile

merci bcp !

peut être que la solution finale sera trouvée c'est bizarre je n'avais pas eu cela il y a 1 an


Ubuntu Studio 16.04.LTS/Harrison Mixbus|Reaper|Fusion|Lightworks

Hors ligne

#4 Le 13/09/2017, à 13:59

ylag

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

Salut,

Essayez la commande :

systemd-analyze blame

...qui retourne la liste des services lancés au démarrage par ordre décroissant de temps requis pour les lancer: apparaît en tête de liste les services les plus lents à démarrer.
Votre problème ne sera pas résolu, mais ça vous donnera peut-être une piste à exploiter.

A+

Dernière modification par ylag (Le 13/09/2017, à 14:01)

Hors ligne

#5 Le 14/09/2017, à 01:13

lepetit

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

euh je vois pas trop l’intérêt des drivers proprio pour une gt720, nouveau la supporte très bien
la ligne modprobe  modprobe.blacklist=nouveau ne sert a rien
le driver nouveau est automatiquement blacklisté quand le pilote proprio est installé

perso je ferai sans le driver proprio, juste mettre a jour mesa via le ppa padoka
https://launchpad.net/~paulo-miguel-dia … untu/pkppa

c'est ce que je fais sur un pc avec une gt710

edit: le logo est découpé, car le pilote proprio n'a pas de drm inclus au noyau (merci nvidia:/ ), tu n'as pas ce soucis avec le driver libre

Dernière modification par lepetit (Le 14/09/2017, à 01:14)


-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10

Hors ligne

#6 Le 15/09/2017, à 09:47

CPascal

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

Merci à tous pour votre aide
je repasse sur le driver libre, je réinstalle resolve studio 14 sinon tout fonctionne
je vous tiens au courant merci smile

S’agissant des services les plus longs voici ce que donne la commande donnée plus haut

         8.564s dev-sda5.device
         8.564s dev-sda5.device
          6.393s systemd-udevd.service
          6.329s systemd-sysctl.service
          5.532s NetworkManager-wait-online.service
          2.334s keyboard-setup.service
          1.626s snapd.service
          1.253s NetworkManager.service
          1.210s systemd-fsck@dev-disk-by\x2duuid-7F0D\x2d767D.service
           840ms resolvconf.service
           832ms accounts-daemon.service
           760ms ModemManager.service
           751ms rtirq.service
           742ms systemd-cryptsetup@cryptswap1.service
           671ms gpu-manager.service
           665ms systemd-modules-load.service
           661ms grub-common.service
           585ms sys-kernel-debug.mount
           548ms dev-hugepages.mount
           548ms dev-mqueue.mount
           547ms media-DONNEES.mount
           541ms apport.service
           528ms home.mount
           473ms avahi-daemon.service

Dernière modification par CPascal (Le 15/09/2017, à 12:26)


Ubuntu Studio 16.04.LTS/Harrison Mixbus|Reaper|Fusion|Lightworks

Hors ligne

#7 Le 15/09/2017, à 10:45

CPascal

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

Alors en fait sans le pilote nvidia, pas de Da vinci resolve donc je l'ai réinstallé. En fait à part le logo coupé hmm qui est disgracieux mais nullement grave, rien ne change. La lenteur au démarrage est sans doute due à autre chose (dual boot win10 Linux avec NTFS Config pour partage HD DONNEES  entre win et linux). sda5 est le /

SDA est divisé en 2 : une partie pour win10 une autre pour linux
SDB est 100% données en NTFS; utilisé par les 2 OS c'est peut être la source du souci finalement et non un pb de carte NVIDIA . Je ne sais pas encore.

Je switche progressivement sur 100% Linux (donc au final le HD de Données ne sera plus en NTFS), mais quand tout sera ok  je bascule (on ne migre pas une machine en mode fast food pour revenir à Win10 en urgence 24H après ! ) . Pour l’heure, franchement, a part cette lenteur (nette et un peu pénible) au boot et quelques soucis à régler ( imprimante scan wifi brother en mode scan encore non fonctionnel, la fonction print est ok ) tout est parfait ! Remplace à 100% un mac ! mais pour 1/3 du prix  !  et sans la fermeture de plus en plus épouvantable by cupertino.

bilan
vidéo ok
MAO ok (harrison mixbus reaper)
bureautique bluetooth wifi print ok
multimédia ok
virtualisation ok

restent à résoudre
- lenteur au boot (cause encore inconnue pour ma part je pensais à un conflit de drivers carte graphique d'où mon post ici ) : non résolu mais je vais chercher
- scan brother wifi DCPL2520DW (autre partie du forum)

et tout sera PARFAIT ! smile d'ores et déjà merci !

Dernière modification par CPascal (Le 15/09/2017, à 12:21)


Ubuntu Studio 16.04.LTS/Harrison Mixbus|Reaper|Fusion|Lightworks

Hors ligne

#8 Le 15/09/2017, à 11:22

??

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

Bonjour
Pour la lenteur de démarrage, peux-tu donner le retour de

dmesg | tail -750

Cela ne permettra peut-être pas de voir le problème mais au moins de voir qu'il n'y a pas de problème avec le NTFS

Dernière modification par ?? (Le 15/09/2017, à 11:25)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#9 Le 15/09/2017, à 12:19

CPascal

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

Bonjour et encore merci pour cette aide !  smile

[    0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff8a7f9ec00000 s108312 r8192 d30952 u524288
[    0.000000] pcpu-alloc: s108312 r8192 d30952 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2053093
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-33-lowlatency root=UUID=89722969-6be8-491c-aa5b-3f0a61619079 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7860252K/8342904K available (9125K kernel code, 1741K rwdata, 3828K rodata, 2164K init, 2380K bss, 482652K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000] NR_IRQS:524544 nr_irqs:456 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2993.177 MHz processor
[    0.000018] Calibrating delay loop (skipped), value calculated using timer frequency.. 5986.35 BogoMIPS (lpj=2993177)
[    0.000020] pid_max: default: 32768 minimum: 301
[    0.000027] ACPI: Core revision 20160930
[    0.008383] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.008684] Security Framework initialized
[    0.008684] Yama: becoming mindful.
[    0.008695] AppArmor: AppArmor initialized
[    0.009014] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.010190] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.010711] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.010718] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.010907] CPU: Physical Processor ID: 0
[    0.010908] CPU: Processor Core ID: 0
[    0.010911] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.010912] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.010914] mce: CPU supports 9 MCE banks
[    0.010921] CPU0: Thermal monitoring enabled (TM1)
[    0.010933] process: using mwait in idle threads
[    0.010935] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.010935] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.011270] Freeing SMP alternatives memory: 32K
[    0.015992] ftrace: allocating 34225 entries in 134 pages
[    0.028124] smpboot: Max logical packages: 1
[    0.028129] DMAR: Host address width 39
[    0.028131] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[    0.028137] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.028138] DMAR: RMRR base: 0x000000de8ca000 end: 0x000000de8d6fff
[    0.028140] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed90000 IOMMU 0
[    0.028140] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[    0.028141] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.028294] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.028295] x2apic enabled
[    0.028309] Switched APIC routing to cluster x2apic.
[    0.028702] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.038708] TSC deadline timer enabled
[    0.038710] smpboot: CPU0: Intel(R) Core(TM) i5-4590S CPU @ 3.00GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.041750] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.041778] ... version:                3
[    0.041778] ... bit width:              48
[    0.041779] ... generic registers:      8
[    0.041779] ... value mask:             0000ffffffffffff
[    0.041780] ... max period:             00007fffffffffff
[    0.041780] ... fixed-purpose events:   3
[    0.041780] ... event mask:             00000007000000ff
[    0.048835] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.050801] smp: Bringing up secondary CPUs ...
[    0.058839] x86: Booting SMP configuration:
[    0.058840] .... node  #0, CPUs:      #1 #2 #3
[    0.078203] smp: Brought up 1 node, 4 CPUs
[    0.078205] smpboot: Total of 4 processors activated (23945.41 BogoMIPS)
[    0.081315] devtmpfs: initialized
[    0.081358] x86/mm: Memory block size: 128MB
[    0.082959] evm: security.selinux
[    0.082959] evm: security.SMACK64
[    0.082959] evm: security.SMACK64EXEC
[    0.082960] evm: security.SMACK64TRANSMUTE
[    0.082960] evm: security.SMACK64MMAP
[    0.082960] evm: security.ima
[    0.082961] evm: security.capability
[    0.083007] PM: Registering ACPI NVS region [mem 0xcaa6e000-0xcaa74fff] (28672 bytes)
[    0.083008] PM: Registering ACPI NVS region [mem 0xde981000-0xdea57fff] (880640 bytes)
[    0.083065] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.083073] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.083104] pinctrl core: initialized pinctrl subsystem
[    0.083187] RTC time: 11:08:51, date: 09/15/17
[    0.083249] NET: Registered protocol family 16
[    0.089082] cpuidle: using governor ladder
[    0.093092] cpuidle: using governor menu
[    0.093093] PCCT header not found.
[    0.093119] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.093120] ACPI: bus type PCI registered
[    0.093121] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.093164] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.093166] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.093172] PCI: Using configuration type 1 for base access
[    0.093250] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.093282] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.098194] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    0.098194] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.098373] ACPI: Added _OSI(Module Device)
[    0.098374] ACPI: Added _OSI(Processor Device)
[    0.098374] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.098375] ACPI: Added _OSI(Processor Aggregator Device)
[    0.098533] ACPI: Executed 1 blocks of module-level executable AML code
[    0.102157] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.102793] ACPI: Dynamic OEM Table Load:
[    0.102797] ACPI: SSDT 0xFFFF8A7F94FEA800 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.103083] ACPI: Dynamic OEM Table Load:
[    0.103087] ACPI: SSDT 0xFFFF8A7F94FF5800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.103388] ACPI: Dynamic OEM Table Load:
[    0.103391] ACPI: SSDT 0xFFFF8A7F94CA1E00 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.104130] ACPI: Interpreter enabled
[    0.104154] ACPI: (supports S0 S3 S4 S5)
[    0.104155] ACPI: Using IOAPIC for interrupt routing
[    0.104174] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.111128] ACPI: Power Resource [FN00] (off)
[    0.111190] ACPI: Power Resource [FN01] (off)
[    0.111880] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.111883] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    1.144049] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    1.144140] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    1.144140] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    1.144452] PCI host bridge to bus 0000:00
[    1.144454] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.144455] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.144456] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.144456] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    1.144457] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    1.144458] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    1.144458] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    1.144459] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    1.144460] pci_bus 0000:00: root bus resource [bus 00-3e]
[    1.144465] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    1.144535] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    1.144561] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    1.144625] pci 0000:00:01.0: System wakeup disabled by ACPI
[    1.144671] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    1.144687] pci 0000:00:14.0: reg 0x10: [mem 0xf7300000-0xf730ffff 64bit]
[    1.144740] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    1.144773] pci 0000:00:14.0: System wakeup disabled by ACPI
[    1.144801] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    1.144817] pci 0000:00:16.0: reg 0x10: [mem 0xf731a000-0xf731a00f 64bit]
[    1.144873] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    1.144936] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    1.144951] pci 0000:00:1a.0: reg 0x10: [mem 0xf7318000-0xf73183ff]
[    1.145031] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    1.145075] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    1.145102] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    1.145115] pci 0000:00:1b.0: reg 0x10: [mem 0xf7310000-0xf7313fff 64bit]
[    1.145168] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    1.145203] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    1.145229] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    1.145287] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    1.145344] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    1.145370] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[    1.145427] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    1.145482] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    1.145510] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[    1.145567] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    1.145622] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    1.145651] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    1.145667] pci 0000:00:1d.0: reg 0x10: [mem 0xf7317000-0xf73173ff]
[    1.145743] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    1.145786] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    1.145813] pci 0000:00:1f.0: [8086:8c5c] type 00 class 0x060100
[    1.145957] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[    1.145968] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    1.145975] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    1.145981] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    1.145987] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    1.145994] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    1.146001] pci 0000:00:1f.2: reg 0x24: [mem 0xf7316000-0xf73167ff]
[    1.146036] pci 0000:00:1f.2: PME# supported from D3hot
[    1.146089] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    1.146103] pci 0000:00:1f.3: reg 0x10: [mem 0xf7315000-0xf73150ff 64bit]
[    1.146120] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    1.146220] pci 0000:01:00.0: [10de:1288] type 00 class 0x030000
[    1.146230] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    1.146240] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[    1.146249] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    1.146255] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    1.146262] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[    1.146316] pci 0000:01:00.0: System wakeup disabled by ACPI
[    1.146343] pci 0000:01:00.1: [10de:0e0f] type 00 class 0x040300
[    1.146353] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[    1.149052] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.149054] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    1.149055] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    1.149058] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[    1.149116] acpiphp: Slot [1] registered
[    1.149121] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.149188] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    1.149207] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    1.149234] pci 0000:03:00.0: reg 0x18: [mem 0xf7200000-0xf7200fff 64bit]
[    1.149250] pci 0000:03:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[    1.149341] pci 0000:03:00.0: supports D1 D2
[    1.149342] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.149384] pci 0000:03:00.0: System wakeup disabled by ACPI
[    1.153065] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    1.153069] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    1.153072] pci 0000:00:1c.2:   bridge window [mem 0xf7200000-0xf72fffff]
[    1.153076] pci 0000:00:1c.2:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    1.153161] pci 0000:04:00.0: [10ec:8178] type 00 class 0x028000
[    1.153189] pci 0000:04:00.0: reg 0x10: [io  0xc000-0xc0ff]
[    1.153225] pci 0000:04:00.0: reg 0x18: [mem 0xf7100000-0xf7103fff 64bit]
[    1.153381] pci 0000:04:00.0: supports D1 D2
[    1.153382] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.153442] pci 0000:04:00.0: System wakeup disabled by ACPI
[    1.156079] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    1.156083] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    1.156086] pci 0000:00:1c.5:   bridge window [mem 0xf7100000-0xf71fffff]
[    1.156805] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.156840] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.156873] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    1.156905] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    1.156937] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.156970] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.157003] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    1.157035] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    1.157228] ACPI: Enabled 4 GPEs in block 00 to 3F
[    1.157405] SCSI subsystem initialized
[    1.157428] libata version 3.00 loaded.
[    1.157453] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    1.157454] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.157456] pci 0000:01:00.0: vgaarb: bridge control possible
[    1.157456] vgaarb: loaded
[    1.157468] ACPI: bus type USB registered
[    1.157479] usbcore: registered new interface driver usbfs
[    1.157484] usbcore: registered new interface driver hub
[    1.157491] usbcore: registered new device driver usb
[    1.157532] Registered efivars operations
[    1.178809] PCI: Using ACPI for IRQ routing
[    1.180037] PCI: pci_cache_line_size set to 64 bytes
[    1.180083] e820: reserve RAM buffer [mem 0x0004f000-0x0004ffff]
[    1.180083] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    1.180084] e820: reserve RAM buffer [mem 0xcaa6e000-0xcbffffff]
[    1.180085] e820: reserve RAM buffer [mem 0xcaeb3000-0xcbffffff]
[    1.180085] e820: reserve RAM buffer [mem 0xde73e000-0xdfffffff]
[    1.180086] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    1.180087] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[    1.180148] NetLabel: Initializing
[    1.180149] NetLabel:  domain hash size = 128
[    1.180149] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.180159] NetLabel:  unlabeled traffic allowed by default
[    1.180220] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.180224] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.182244] clocksource: Switched to clocksource hpet
[    1.187889] VFS: Disk quotas dquot_6.6.0
[    1.187903] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.187979] AppArmor: AppArmor Filesystem Enabled
[    1.188013] pnp: PnP ACPI init
[    1.188093] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    1.188096] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.188169] pnp 00:01: can't evaluate _CRS: 12311
[    1.188190] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.188210] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.188254] system 00:03: [io  0x1854-0x1857] has been reserved
[    1.188255] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.188356] system 00:04: [io  0x0a20-0x0a3f] has been reserved
[    1.188357] system 00:04: [io  0x0a10-0x0a1f] has been reserved
[    1.188358] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.188382] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.188413] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    1.188446] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    1.188447] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.188573] pnp 00:08: [dma 0 disabled]
[    1.188625] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.189067] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.189068] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.189069] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.189070] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.189070] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.189071] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.189072] system 00:09: [mem 0xfed90000-0xfed93fff] could not be reserved
[    1.189073] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.189074] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[    1.189075] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.189076] system 00:09: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[    1.189077] system 00:09: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    1.189078] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.189286] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[    1.189288] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.189290] pnp: PnP ACPI: found 11 devices
[    1.195023] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.195037] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    1.195039] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    1.195040] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    1.195053] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    1.195054] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    1.195054] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    1.195055] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    1.195056] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    1.195057] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    1.195061] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe0000000-0xe01fffff]
[    1.195064] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe0200000-0xe03fffff 64bit pref]
[    1.195066] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    1.195067] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.195069] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    1.195071] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[    1.195073] pci 0000:00:01.0:   bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[    1.195075] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    1.195077] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    1.195081] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe01fffff]
[    1.195084] pci 0000:00:1c.0:   bridge window [mem 0xe0200000-0xe03fffff 64bit pref]
[    1.195089] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    1.195091] pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
[    1.195095] pci 0000:00:1c.2:   bridge window [mem 0xf7200000-0xf72fffff]
[    1.195097] pci 0000:00:1c.2:   bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[    1.195102] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    1.195104] pci 0000:00:1c.5:   bridge window [io  0xc000-0xcfff]
[    1.195108] pci 0000:00:1c.5:   bridge window [mem 0xf7100000-0xf71fffff]
[    1.195115] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.195116] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.195117] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.195117] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    1.195118] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    1.195119] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    1.195119] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    1.195120] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff window]
[    1.195121] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    1.195122] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[    1.195122] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[    1.195123] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    1.195124] pci_bus 0000:02: resource 1 [mem 0xe0000000-0xe01fffff]
[    1.195125] pci_bus 0000:02: resource 2 [mem 0xe0200000-0xe03fffff 64bit pref]
[    1.195126] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    1.195126] pci_bus 0000:03: resource 1 [mem 0xf7200000-0xf72fffff]
[    1.195127] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[    1.195128] pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
[    1.195129] pci_bus 0000:04: resource 1 [mem 0xf7100000-0xf71fffff]
[    1.195206] NET: Registered protocol family 2
[    1.195323] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    1.195407] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.195523] TCP: Hash tables configured (established 65536 bind 65536)
[    1.195540] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.195561] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.195597] NET: Registered protocol family 1
[    1.230346] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.230360] PCI: CLS 64 bytes, default 64
[    1.230397] Unpacking initramfs...
[    1.763807] Freeing initrd memory: 48276K
[    1.763832] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.763834] software IO TLB [mem 0xcc36f000-0xd036f000] (64MB) mapped at [ffff8a7e4c36f000-ffff8a7e5036efff]
[    1.764001] Scanning for low memory corruption every 60 seconds
[    1.764207] audit: initializing netlink subsys (disabled)
[    1.764246] audit: type=2000 audit(1505473731.724:1): initialized
[    1.764542] Initialise system trusted keyrings
[    1.764602] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    1.765606] zbud: loaded
[    1.765918] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.766051] fuse init (API version 7.26)
[    1.767070] Key type asymmetric registered
[    1.767071] Asymmetric key parser 'x509' registered
[    1.767094] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    1.767114] io scheduler noop registered
[    1.767115] io scheduler deadline registered
[    1.767119] io scheduler cfq registered (default)
[    1.767594] efifb: probing for efifb
[    1.767603] efifb: framebuffer at 0xf1000000, using 1920k, total 1920k
[    1.767603] efifb: mode is 800x600x32, linelength=3200, pages=1
[    1.767604] efifb: scrolling: redraw
[    1.767604] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.767662] Console: switching to colour frame buffer device 100x37
[    1.767669] fb0: EFI VGA frame buffer device
[    1.767674] intel_idle: MWAIT substates: 0x42120
[    1.767675] intel_idle: v0.4.1 model 0x3C
[    1.767789] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.767854] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.767857] ACPI: Power Button [PWRB]
[    1.767880] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.767881] ACPI: Power Button [PWRF]
[    1.768146] ACPI: Invalid active2 threshold
[    1.768184] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.768252] thermal LNXTHERM:00: registered as thermal_zone0
[    1.768253] ACPI: Thermal Zone [TZ00] (28 C)
[    1.768393] thermal LNXTHERM:01: registered as thermal_zone1
[    1.768394] ACPI: Thermal Zone [TZ01] (30 C)
[    1.768421] GHES: HEST is not enabled!
[    1.768472] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.789053] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.790043] Linux agpgart interface v0.103
[    1.792350] loop: module loaded
[    1.792459] libphy: Fixed MDIO Bus: probed
[    1.792460] tun: Universal TUN/TAP device driver, 1.6
[    1.792460] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.792479] PPP generic driver version 2.4.2
[    1.792504] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.792506] ehci-pci: EHCI PCI platform driver
[    1.792579] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.792584] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.792593] ehci-pci 0000:00:1a.0: debug port 2
[    1.796496] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.796540] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7318000
[    1.803336] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.803380] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.803381] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.803382] usb usb1: Product: EHCI Host Controller
[    1.803383] usb usb1: Manufacturer: Linux 4.10.0-33-lowlatency ehci_hcd
[    1.803383] usb usb1: SerialNumber: 0000:00:1a.0
[    1.803557] hub 1-0:1.0: USB hub found
[    1.803560] hub 1-0:1.0: 2 ports detected
[    1.803761] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.803764] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.803773] ehci-pci 0000:00:1d.0: debug port 2
[    1.807664] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.807826] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7317000
[    1.814316] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.814368] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.814369] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.814370] usb usb2: Product: EHCI Host Controller
[    1.814371] usb usb2: Manufacturer: Linux 4.10.0-33-lowlatency ehci_hcd
[    1.814371] usb usb2: SerialNumber: 0000:00:1d.0
[    1.814545] hub 2-0:1.0: USB hub found
[    1.814549] hub 2-0:1.0: 2 ports detected
[    1.814655] ehci-platform: EHCI generic platform driver
[    1.814666] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.814668] ohci-pci: OHCI PCI platform driver
[    1.814676] ohci-platform: OHCI generic platform driver
[    1.814680] uhci_hcd: USB Universal Host Controller Interface driver
[    1.814784] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.814787] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.815866] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    1.815870] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.816095] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.816096] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.816097] usb usb3: Product: xHCI Host Controller
[    1.816097] usb usb3: Manufacturer: Linux 4.10.0-33-lowlatency xhci-hcd
[    1.816098] usb usb3: SerialNumber: 0000:00:14.0
[    1.816234] hub 3-0:1.0: USB hub found
[    1.816243] hub 3-0:1.0: 10 ports detected
[    1.817540] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.817542] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.817565] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.817566] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.817566] usb usb4: Product: xHCI Host Controller
[    1.817567] usb usb4: Manufacturer: Linux 4.10.0-33-lowlatency xhci-hcd
[    1.817567] usb usb4: SerialNumber: 0000:00:14.0
[    1.817719] hub 4-0:1.0: USB hub found
[    1.817724] hub 4-0:1.0: 2 ports detected
[    1.818056] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.821121] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.821145] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.821226] mousedev: PS/2 mouse device common for all mice
[    1.821375] rtc_cmos 00:02: RTC can wake from S4
[    1.841505] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.841578] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.841582] i2c /dev entries driver
[    1.841618] device-mapper: uevent: version 1.0.3
[    1.841680] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    1.841684] intel_pstate: Intel P-state driver initializing
[    1.841950] ledtrig-cpu: registered to indicate activity on CPUs
[    1.841951] EFI Variables Facility v0.08 2004-May-17
[    1.866412] NET: Registered protocol family 10
[    1.869114] Segment Routing with IPv6
[    1.869127] NET: Registered protocol family 17
[    1.869133] Key type dns_resolver registered
[    1.869383] microcode: sig=0x306c3, pf=0x2, revision=0x22
[    1.869426] microcode: Microcode Update Driver: v2.2.
[    1.869502] registered taskstats version 1
[    1.869509] Loading compiled-in X.509 certificates
[    1.871169] Loaded X.509 cert 'Build time autogenerated kernel key: f1d0aadae2bc2d2b30a91d27dc5976035698d97b'
[    1.871178] zswap: loaded using pool lzo/zbud
[    1.879664] Key type big_key registered
[    1.879666] Key type trusted registered
[    1.880948] Key type encrypted registered
[    1.880950] AppArmor: AppArmor sha1 policy hashing enabled
[    1.880952] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.880972] evm: HMAC attrs: 0x1
[    1.881289]   Magic number: 1:376:125
[    1.881335] acpi device:00: hash matches
[    1.881393] rtc_cmos 00:02: setting system clock to 2017-09-15 11:08:53 UTC (1505473733)
[    1.881454] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.881455] EDD information not available.
[    1.881488] PM: Hibernation image not present or could not be loaded.
[    1.882681] Freeing unused kernel memory: 2164K
[    1.882682] Write protecting the kernel read-only data: 14336k
[    1.882967] Freeing unused kernel memory: 1100K
[    1.883415] Freeing unused kernel memory: 268K
[    1.888048] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.895439] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.895492] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.895499] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.895833] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.895853] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.896399] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.896431] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.896694] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.896727] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.896756] random: udevadm: uninitialized urandom read (16 bytes read)
[    1.911744] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[    1.920940] [drm] Initialized
[    1.923653] ahci 0000:00:1f.2: version 3.0
[    1.923829] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x23 impl SATA mode
[    1.923831] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems 
[    1.924282] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.924285] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.928118] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffff9a0940cb9000, 34:64:a9:10:97:9b, XID 0c000800 IRQ 28
[    1.928119] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.931535] nvidia: loading out-of-tree module taints kernel.
[    1.931539] nvidia: module license 'NVIDIA' taints kernel.
[    1.931539] Disabling lock debugging due to kernel taint
[    1.934284] scsi host0: ahci
[    1.934541] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[    1.935938] scsi host1: ahci
[    1.937390] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    1.937621] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    1.937675] nvidia-nvlink: Nvlink Core is being initialized, major device number 246
[    1.937683] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  375.66  Mon May  1 15:29:16 PDT 2017 (using threaded interrupts)
[    1.937908] scsi host2: ahci
[    1.938654] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  375.66  Mon May  1 14:33:30 PDT 2017
[    1.938702] scsi host3: ahci
[    1.938775] scsi host4: ahci
[    1.939021] scsi host5: ahci
[    1.939024] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[    1.939055] ata1: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316100 irq 27
[    1.939057] ata2: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316180 irq 27
[    1.939057] ata3: DUMMY
[    1.939058] ata4: DUMMY
[    1.939058] ata5: DUMMY
[    1.939060] ata6: SATA max UDMA/133 abar m2048@0xf7316000 port 0xf7316380 irq 27
[    2.118295] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.126279] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.178270] usb 3-1: new low-speed USB device number 2 using xhci_hcd
[    2.237045] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    2.237058] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.237362] hub 1-1:1.0: USB hub found
[    2.237458] hub 1-1:1.0: 4 ports detected
[    2.244609] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    2.244610] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.244658] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.244865] hub 2-1:1.0: USB hub found
[    2.244944] hub 2-1:1.0: 6 ports detected
[    2.245618] ata2.00: ATA-8: TOSHIBA HDWD110, MS2OA8J0, max UDMA/133
[    2.245619] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.246566] ata2.00: configured for UDMA/133
[    2.252493] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.252506] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.253725] ata1.00: ATA-8: TOSHIBA HDWD110, MS2OA8J0, max UDMA/133
[    2.253727] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.254974] ata1.00: configured for UDMA/133
[    2.255168] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA HDWD110  A8J0 PQ: 0 ANSI: 5
[    2.259975] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.259976] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.259978] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.264307] ata6.00: ATAPI: hp       CDDVDW SN-208FB, HJ10, max UDMA/100
[    2.271600] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.271611] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.271612] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.276023] ata6.00: configured for UDMA/100
[    2.283443] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.283445] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.283449] sd 0:0:0:0: [sda] Write Protect is off
[    2.283450] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.283456] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.283473] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.283717] scsi 1:0:0:0: Direct-Access     ATA      TOSHIBA HDWD110  A8J0 PQ: 0 ANSI: 5
[    2.312383] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    2.312435] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.312436] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    2.312457] sd 1:0:0:0: [sdb] Write Protect is off
[    2.312459] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.312479] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.316210] scsi 5:0:0:0: CD-ROM            hp       CDDVDW SN-208FB  HJ10 PQ: 0 ANSI: 5
[    2.346864]  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[    2.347328] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.352678] sr 5:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.352679] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.352755] usb 3-1: New USB device found, idVendor=045e, idProduct=07f8
[    2.352756] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.352757] usb 3-1: Product: Wired Keyboard 600
[    2.352758] usb 3-1: Manufacturer: Microsoft
[    2.352813] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    2.352859] sr 5:0:0:0: Attached scsi generic sg2 type 5
[    2.355438] hidraw: raw HID events driver (C) Jiri Kosina
[    2.360614] usbcore: registered new interface driver usbhid
[    2.360615] usbhid: USB HID core driver
[    2.361669] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:045E:07F8.0001/input/input5
[    2.378121]  sdb: sdb1
[    2.378616] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.413418] hid-generic 0003:045E:07F8.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:14.0-1/input0
[    2.414235] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:045E:07F8.0002/input/input6
[    2.466471] hid-generic 0003:045E:07F8.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:14.0-1/input1
[    2.509235] usb 3-2: new full-speed USB device number 3 using xhci_hcd
[    2.798273] tsc: Refined TSC clocksource calibration: 2993.069 MHz
[    2.798280] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b24b1963f3, max_idle_ns: 440795227598 ns
[    2.967213] random: crng init done
[    3.271887] usb 3-2: New USB device found, idVendor=04d9, idProduct=a0d6
[    3.271889] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.271889] usb 3-2: Product: USB Gaming Mouse
[    3.271890] usb 3-2: Manufacturer: E-Signal/A-One
[    3.274647] input: E-Signal/A-One USB Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:04D9:A0D6.0003/input/input7
[    3.274871] hid-generic 0003:04D9:A0D6.0003: input,hidraw2: USB HID v1.10 Mouse [E-Signal/A-One USB Gaming Mouse] on usb-0000:00:14.0-2/input0
[    3.278229] input: E-Signal/A-One USB Gaming Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:04D9:A0D6.0004/input/input8
[    3.330450] hid-generic 0003:04D9:A0D6.0004: input,hidraw3: USB HID v1.10 Keyboard [E-Signal/A-One USB Gaming Mouse] on usb-0000:00:14.0-2/input1
[    3.486194] usb 3-4: new full-speed USB device number 4 using xhci_hcd
[    3.655204] usb 3-4: New USB device found, idVendor=0a5c, idProduct=4500
[    3.655205] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.655206] usb 3-4: Product: BCM2070B0
[    3.655206] usb 3-4: Manufacturer: Broadcom
[    3.655560] hub 3-4:1.0: USB hub found
[    3.655652] hub 3-4:1.0: 3 ports detected
[    3.806253] clocksource: Switched to clocksource tsc
[    3.926221] usb 3-4.1: new full-speed USB device number 5 using xhci_hcd
[    4.004639] usb 3-4.1: New USB device found, idVendor=0a5c, idProduct=4502
[    4.004641] usb 3-4.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.006266] input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1:1.0/0003:0A5C:4502.0005/input/input9
[    4.058270] hid-generic 0003:0A5C:4502.0005: input,hidraw4: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:14.0-4.1/input0
[    4.122214] usb 3-4.2: new full-speed USB device number 6 using xhci_hcd
[    4.200297] usb 3-4.2: New USB device found, idVendor=0a5c, idProduct=4503
[    4.200299] usb 3-4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.203462] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.0/0003:0A5C:4503.0006/input/input10
[    4.203630] hid-generic 0003:0A5C:4503.0006: input,hidraw5: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:14.0-4.2/input0
[    4.267203] usb 3-4.3: new full-speed USB device number 7 using xhci_hcd
[    4.346582] usb 3-4.3: New USB device found, idVendor=0a5c, idProduct=21e2
[    4.346594] usb 3-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.346595] usb 3-4.3: Product: BCM920702 Bluetooth 4.0 Zero Touch Dongle
[    4.346596] usb 3-4.3: Manufacturer: Broadcom Corp
[    4.346596] usb 3-4.3: SerialNumber: 0019860008E1
[    8.426484] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    9.200401] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    9.200495] systemd[1]: Detected architecture x86-64.
[    9.206656] systemd[1]: Set hostname to <XXXXXXX>.
[   10.033028] systemd[1]: Listening on udev Control Socket.
[   10.033086] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[   10.033106] systemd[1]: Listening on Syslog Socket.
[   10.033115] systemd[1]: Reached target User and Group Name Lookups.
[   10.033179] systemd[1]: Created slice System Slice.
[   10.033233] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   10.033249] systemd[1]: Listening on fsck to fsckd communication Socket.
[   10.732412] lp: driver loaded but no devices found
[   10.810219] ppdev: user-space parallel port driver
[   19.447690] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   19.466501] systemd-journald[349]: Received request to flush runtime journal from PID 1
[   19.522412] wmi: Mapper loaded
[   19.530397] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   19.532918] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160930/utaddress-247)
[   19.532921] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.532924] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x00000000000008FF (\GPR) (20160930/utaddress-247)
[   19.532926] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.532926] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPRL) (20160930/utaddress-247)
[   19.532928] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x00000000000008FF (\GPR) (20160930/utaddress-247)
[   19.532929] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.532930] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\GPRL) (20160930/utaddress-247)
[   19.532931] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x00000000000008FF (\GPR) (20160930/utaddress-247)
[   19.532933] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   19.532933] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   19.556507] rtl8192ce 0000:04:00.0: enabling device (0100 -> 0103)
[   19.566626] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[   19.566627] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   19.566628] RAPL PMU: hw unit of domain package 2^-14 Joules
[   19.566628] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   19.566629] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   19.569843] rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
[   19.573193] AVX2 version of gcm_enc/dec engaged.
[   19.573194] AES CTR mode by8 optimization enabled
[   19.575114] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   19.575270] rtlwifi: rtlwifi: wireless switch is on
[   19.603817] snd_hda_intel 0000:00:1b.0: enabling device (0100 -> 0102)
[   19.604799] snd_hda_intel 0000:01:00.1: Disabling MSI
[   19.604803] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   19.605134] intel_rapl: Found RAPL domain package
[   19.605135] intel_rapl: Found RAPL domain core
[   19.605136] intel_rapl: Found RAPL domain dram
[   19.605138] intel_rapl: RAPL package 0 domain package locked by BIOS
[   19.605140] intel_rapl: RAPL package 0 domain dram locked by BIOS
[   19.615537] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC221: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[   19.615538] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
[   19.615539] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   19.615540] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   19.615540] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   19.615541] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x1a
[   19.615542] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1b
[   19.622722] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   19.622764] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   19.622796] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   19.622831] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   19.638931] Bluetooth: Core ver 2.22
[   19.638941] NET: Registered protocol family 31
[   19.638941] Bluetooth: HCI device and connection manager initialized
[   19.638943] Bluetooth: HCI socket layer initialized
[   19.638944] Bluetooth: L2CAP socket layer initialized
[   19.638947] Bluetooth: SCO socket layer initialized
[   19.642339] usbcore: registered new interface driver btusb
[   19.763360] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 243
[   19.830878] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[   19.830917] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[   20.004289] input: HP WMI hotkeys as /devices/virtual/input/input17
[   20.020170] rtl8192ce 0000:04:00.0 wlp4s0: renamed from wlan0
[   20.566362] NVRM: Your system is not currently configured to drive a VGA console
[   20.566363] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[   20.566364] NVRM: requires the use of a text-mode VGA console. Use of other console
[   20.566364] NVRM: drivers including, but not limited to, vesafb, may result in
[   20.566364] NVRM: corruption and stability problems, and is not supported.
[   22.814327] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[   23.277275] audit: type=1400 audit(1505473754.894:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1040 comm="apparmor_parser"
[   23.277277] audit: type=1400 audit(1505473754.894:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1040 comm="apparmor_parser"
[   23.277771] audit: type=1400 audit(1505473754.895:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1037 comm="apparmor_parser"
[   23.277772] audit: type=1400 audit(1505473754.895:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1037 comm="apparmor_parser"
[   23.277773] audit: type=1400 audit(1505473754.895:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1037 comm="apparmor_parser"
[   23.277773] audit: type=1400 audit(1505473754.895:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1037 comm="apparmor_parser"
[   23.277969] audit: type=1400 audit(1505473754.895:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=1036 comm="apparmor_parser"
[   23.277970] audit: type=1400 audit(1505473754.895:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=1036 comm="apparmor_parser"
[   23.278555] audit: type=1400 audit(1505473754.896:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=1043 comm="apparmor_parser"
[   23.279570] audit: type=1400 audit(1505473754.897:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1042 comm="apparmor_parser"
[  100.158778] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  100.158779] Bluetooth: BNEP filters: protocol multicast
[  100.158781] Bluetooth: BNEP socket layer initialized
[  102.022520] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[  102.248137] nvidia-modeset: Allocated GPU:0 (GPU-fe6056de-81f8-cca5-60ec-fdbcb09c1b43) @ PCI:0000:01:00.0
[  102.391998] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[  102.394864] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[  102.456038] r8169 0000:03:00.0 enp3s0: link down
[  102.456127] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[  102.602769] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[  108.100899] vboxdrv: Found 4 processor cores
[  108.117676] vboxdrv: TSC mode is Invariant, tentative frequency 2993058984 Hz
[  108.117676] vboxdrv: Successfully loaded version 5.0.40_Ubuntu (interface 0x00240000)
[  108.120121] VBoxNetFlt: Successfully started.
[  108.122425] VBoxNetAdp: Successfully started.
[  108.124772] VBoxPciLinuxInit
[  108.126094] vboxpci: IOMMU not found (not registered)
[  109.090835] wlp4s0: authenticate with f4:ca:e5:90:c8:98
[  109.446550] wlp4s0: send auth to f4:ca:e5:90:c8:98 (try 1/3)
[  109.448146] wlp4s0: authenticated
[  109.448354] wlp4s0: associate with f4:ca:e5:90:c8:98 (try 1/3)
[  109.451632] wlp4s0: RX AssocResp from f4:ca:e5:90:c8:98 (capab=0x411 status=0 aid=5)
[  109.452157] wlp4s0: associated
[  109.452178] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[  113.588738] Bluetooth: RFCOMM TTY layer initialized
[  113.588743] Bluetooth: RFCOMM socket layer initialized
[  113.588747] Bluetooth: RFCOMM ver 1.11

Dernière modification par CPascal (Le 15/09/2017, à 12:21)


Ubuntu Studio 16.04.LTS/Harrison Mixbus|Reaper|Fusion|Lightworks

Hors ligne

#10 Le 15/09/2017, à 12:38

??

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

Il va falloir focaliser sur ce créneau de 77 secondes.

[   23.279570] audit: type=1400 audit(1505473754.897:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1042 comm="apparmor_parser"
[  100.158778] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  100.158779] Bluetooth: BNEP filters: protocol multicast
[  100.158781] Bluetooth: BNEP socket layer initialized
[  102.022520] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[  102.248137] nvidia-modeset: Allocated GPU:0 (GPU-fe6056de-81f8-cca5-60ec-fdbcb09c1b43) @ PCI:0000:01:00.0

J'ai  l'impression que c'est bien un problème de carte graphique.   Je pense que d'autres avis vont arriver.

Je ne pense pas que cela soit un problème réseau

[  109.452178] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready

bien que lui aussi mette beaucoup de temps. Trop ?

Mais pour le bluetooth, je n'en suis certain car dans un boot normal

~$ dmesg | grep Bluetooth
[   16.079502] toshiba_bluetooth: Toshiba ACPI Bluetooth device driver
[   18.411979] Bluetooth: Core ver 2.21
[   18.411994] Bluetooth: HCI device and connection manager initialized
[   18.411996] Bluetooth: HCI socket layer initialized
[   18.411998] Bluetooth: L2CAP socket layer initialized
[   18.412002] Bluetooth: SCO socket layer initialized
[   32.986273] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   32.986276] Bluetooth: BNEP filters: protocol multicast
[   32.986280] Bluetooth: BNEP socket layer initialized

Si ton bios te permet de le déactiver, tu pourrais faire un essai

Dernière modification par ?? (Le 15/09/2017, à 13:26)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#11 Le 15/09/2017, à 12:44

CPascal

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

ah mince. bizarre car je n'ai pas changé de hardware depuis des mois (2 ans meme) et je n'ai jamais eu ce souci avant
j'en profite pour enlever la clé USB Bluetooth qui semble ralentir le processus aussi et qui ne me sert presque jamais
pour l'internet je peux éventuellement passer en CPL

c'est un pc fixe avec une clé USB Bluetooth je l'ai enlevée le service Bluetooth ne se lance plus
je ne suis pas sur d"avoir gagné du temps au boot lol c’est curieux comme problème

la carte wifi est PCI par contre.

Dernière modification par CPascal (Le 15/09/2017, à 13:11)


Ubuntu Studio 16.04.LTS/Harrison Mixbus|Reaper|Fusion|Lightworks

Hors ligne

#12 Le 15/09/2017, à 13:11

lepetit

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

etonnant que ton logiciel ne tourne sur sur driver proprio
tu as bien installé le dernier mesa via le ppa comme je t'ai indiqué ?

Dernière modification par lepetit (Le 15/09/2017, à 13:12)


-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10

Hors ligne

#13 Le 15/09/2017, à 13:11

CPascal

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

non c’est un hp prodesk 400 smile (fixe)
oui j'ai bien installé le driver. je suis vos conseils sinon à quoi bon ? smile vous me faites la gentillesse de m'aider la moindre des choses de mon coté est de suivre  vos avis et de tester . Mais j'ai noté que resolve14  était un peu capricieux....

Dernière modification par CPascal (Le 15/09/2017, à 14:27)


Ubuntu Studio 16.04.LTS/Harrison Mixbus|Reaper|Fusion|Lightworks

Hors ligne

#14 Le 15/09/2017, à 13:41

lepetit

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

ça peut etre tout simplement des soucis lié au bios qui ne soit pas très linux compliant

as tu des périphérique usb exotique ?

essaie de démarrer avec un disque dur en moins et juste avec clavier/souris branché
ton bios est a jour ?

autre chose, ton gpu inclus dans le processeur intel est actif ?
regarde dans le bios si tu peux le désactiver

Dernière modification par lepetit (Le 15/09/2017, à 13:51)


-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10

Hors ligne

#15 Le 15/09/2017, à 14:13

cqfd93

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

Bonjour,

CPascal a écrit :

non c’est un hp prodesk 400 smile (fixe)

http://product-images.www8-hp.com/digme … 230189.png

Euh… à quoi sert cette photo, à part à manger de la bande passante à chaque fois que quelqu'un affiche la discussion ?


cqfd93

En ligne

#16 Le 15/09/2017, à 14:27

CPascal

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

elle est enlevée désolé ^^

ça peut etre tout simplement des soucis lié au bios qui ne soit pas très linux compliant
as tu des périphérique usb exotique ?
essaie de démarrer avec un disque dur en moins et juste avec clavier/souris branché
ton bios est a jour ?
autre chose, ton gpu inclus dans le processeur intel est actif ?
regarde dans le bios si tu peux le désactiver

oui je vais tester tout ca/ merci encore
le GPU est desactivé dans le BIOS c'est déjà un point certain

Dernière modification par CPascal (Le 15/09/2017, à 14:29)


Ubuntu Studio 16.04.LTS/Harrison Mixbus|Reaper|Fusion|Lightworks

Hors ligne

#17 Le 15/09/2017, à 14:43

??

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

Je ne sais pas trop comprendre cette ligne du coup

[  102.248137] nvidia-modeset: Allocated GPU:0 (GPU-fe6056de-81f8-cca5-60ec-fdbcb09c1b43) @ PCI:0000:01:00.0

Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#18 Le 15/09/2017, à 16:26

CPascal

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

merci pour cette aide
en fait j'ai fait simple j'ai formaté réinstallé la partie Ubuntu (apres avoir utilisé os uninstaller et gparted) et j'ai reboot à chaque étape  et constaté ce qui se passait:

- première installe boot normal et rapide
- installe avec mises à jour idem
- application de ntfs-config aucun souci
et je me suis arrêté la
vraisemblablement c’est bien l’installe du pilote officiel NVIDIA qui plante tout yikes

Je ne suis pas du genre maniaque: si je parle de lenteur du boot c'est que c'est vraiment TRÈS pénible, le pc mouline tellement que j’aurais le temps de me faire un café. Inutilisable au quotidien. surtout que le pc est propre, nickel, aucun souci. Là sans l'installe du driver propriétaire tout est absolument NORMAL. Alors au final ça fonctionne mais si à chaque boot je dois attendre 5 min ce n’est pas possible. Donc je vais voir si je peux utiliser les softs vidéo sous driver libre.

Dernière modification par CPascal (Le 15/09/2017, à 16:31)


Ubuntu Studio 16.04.LTS/Harrison Mixbus|Reaper|Fusion|Lightworks

Hors ligne

#19 Le 15/09/2017, à 16:38

??

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

Peux-tu indiquer la référence exacte de ton ordinateur ainsi que la version bios qu'il a car je viens de prendre connaissance de cette discussion http://www.tomshardware.fr/forum/id-298 … e-970.html

sudo dmidecode -t0 -t1

Dernière modification par ?? (Le 15/09/2017, à 16:44)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#20 Le 15/09/2017, à 16:56

??

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

J'ai déjà vu ce cas  et une solution, je dirais plutôt un palliatif, est trouvée avec une option de gestion de l'énergei
http://forum.elementaryos-fr.org/topic/ … -et-prime/

On peut toujours essayer

sudo gedit /boot/grub/grub.cfg

Vers la ligne 148 tu verras un truc du style

	linux	/boot/vmlinuz-4.4.0-93-generic.efi.signed root=UUID=299d7644-ae32-43ff-b3db-16987328b52f ro  quiet splash $vt_handoff

tu modifies pour avoir

	linux	/boot/vmlinuz-4.4.0-93-generic.efi.signed root=UUID=299d7644-ae32-43ff-b3db-16987328b52f ro  quiet splash    acpi=off  $vt_handoff

tu sauvegardes, Tu verras au prochain boot
Mais peux-tu rappeler le pilote qui est installé ?

Dernière modification par ?? (Le 15/09/2017, à 17:36)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#21 Le 15/09/2017, à 17:34

CPascal

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

Encore merci pour cette aide !

Getting SMBIOS data from sysfs.
SMBIOS 2.7 present.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
	Vendor: Hewlett-Packard
	Version: L02 v02.39
	Release Date: 12/11/2014
	Address: 0xF0000
	Runtime Size: 64 kB
	ROM Size: 8192 kB
	Characteristics:
		PCI is supported
		PNP is supported
		BIOS is upgradeable
		BIOS shadowing is allowed
		Boot from CD is supported
		Selectable boot is supported
		EDD is supported
		Print screen service is supported (int 5h)
		8042 keyboard services are supported (int 9h)
		Serial services are supported (int 14h)
		Printer services are supported (int 17h)
		ACPI is supported
		USB legacy is supported
		BIOS boot specification is supported
		Function key-initiated network boot is supported
		Targeted content distribution is supported
		UEFI is supported
	BIOS Revision: 2.39

Handle 0x0001, DMI type 1, 27 bytes
System Information
	Manufacturer: Hewlett-Packard
	Product Name: HP ProDesk 400 G2 MT
	Version: Not Specified
	Serial Number: XXXXXXXXXX
	UUID: XXXXXXXX
	Wake-up Type: Power Switch
	SKU Number: XXXXXXXX
	Family: 103C_53307F G=D.

Dernière modification par CPascal (Le 15/09/2017, à 17:34)


Ubuntu Studio 16.04.LTS/Harrison Mixbus|Reaper|Fusion|Lightworks

Hors ligne

#22 Le 15/09/2017, à 17:43

CPascal

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

hmm pas moyen de trouver la bonne ligne sad
là je suis sous x org nouveau


#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5  c58fb225-8d2b-4ed5-80b8-3c80e481990a
else
  search --no-floppy --fs-uuid --set=root c58fb225-8d2b-4ed5-80b8-3c80e481990a
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/09_lowlatency ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu (lowlatency)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-c58fb225-8d2b-4ed5-80b8-3c80e481990a' {
recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5  c58fb225-8d2b-4ed5-80b8-3c80e481990a
	else
	  search --no-floppy --fs-uuid --set=root c58fb225-8d2b-4ed5-80b8-3c80e481990a
	fi
	linux	/boot/vmlinuz-4.10.0-33-lowlatency root=UUID=c58fb225-8d2b-4ed5-80b8-3c80e481990a ro   quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.10.0-33-lowlatency
}

### END /etc/grub.d/09_lowlatency ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-c58fb225-8d2b-4ed5-80b8-3c80e481990a' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt5'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5  c58fb225-8d2b-4ed5-80b8-3c80e481990a
	else
	  search --no-floppy --fs-uuid --set=root c58fb225-8d2b-4ed5-80b8-3c80e481990a
	fi
        linux	/boot/vmlinuz-4.10.0-33-lowlatency root=UUID=c58fb225-8d2b-4ed5-80b8-3c80e481990a ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.10.0-33-lowlatency
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-c58fb225-8d2b-4ed5-80b8-3c80e481990a' {
	menuentry 'Ubuntu, avec Linux 4.10.0-33-lowlatency' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-33-lowlatency-advanced-c58fb225-8d2b-4ed5-80b8-3c80e481990a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5  c58fb225-8d2b-4ed5-80b8-3c80e481990a
		else
		  search --no-floppy --fs-uuid --set=root c58fb225-8d2b-4ed5-80b8-3c80e481990a
		fi
		echo	'Chargement de Linux 4.10.0-33-lowlatency…'
	        linux	/boot/vmlinuz-4.10.0-33-lowlatency root=UUID=c58fb225-8d2b-4ed5-80b8-3c80e481990a ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-33-lowlatency
	}
	menuentry 'Ubuntu, with Linux 4.10.0-33-lowlatency (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-33-lowlatency-init-upstart-c58fb225-8d2b-4ed5-80b8-3c80e481990a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5  c58fb225-8d2b-4ed5-80b8-3c80e481990a
		else
		  search --no-floppy --fs-uuid --set=root c58fb225-8d2b-4ed5-80b8-3c80e481990a
		fi
		echo	'Chargement de Linux 4.10.0-33-lowlatency…'
	        linux	/boot/vmlinuz-4.10.0-33-lowlatency root=UUID=c58fb225-8d2b-4ed5-80b8-3c80e481990a ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-33-lowlatency
	}
	menuentry 'Ubuntu, with Linux 4.10.0-33-lowlatency (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-33-lowlatency-recovery-c58fb225-8d2b-4ed5-80b8-3c80e481990a' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5  c58fb225-8d2b-4ed5-80b8-3c80e481990a
		else
		  search --no-floppy --fs-uuid --set=root c58fb225-8d2b-4ed5-80b8-3c80e481990a
		fi
		echo	'Chargement de Linux 4.10.0-33-lowlatency…'
	        linux	/boot/vmlinuz-4.10.0-33-lowlatency root=UUID=c58fb225-8d2b-4ed5-80b8-3c80e481990a ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-33-lowlatency
	}
	menuentry 'Ubuntu, avec Linux 4.10.0-28-lowlatency' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-lowlatency-advanced-c58fb225-8d2b-4ed5-80b8-3c80e481990a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5  c58fb225-8d2b-4ed5-80b8-3c80e481990a
		else
		  search --no-floppy --fs-uuid --set=root c58fb225-8d2b-4ed5-80b8-3c80e481990a
		fi
		echo	'Chargement de Linux 4.10.0-28-lowlatency…'
	        linux	/boot/vmlinuz-4.10.0-28-lowlatency root=UUID=c58fb225-8d2b-4ed5-80b8-3c80e481990a ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-28-lowlatency
	}
	menuentry 'Ubuntu, with Linux 4.10.0-28-lowlatency (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-lowlatency-init-upstart-c58fb225-8d2b-4ed5-80b8-3c80e481990a' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5  c58fb225-8d2b-4ed5-80b8-3c80e481990a
		else
		  search --no-floppy --fs-uuid --set=root c58fb225-8d2b-4ed5-80b8-3c80e481990a
		fi
		echo	'Chargement de Linux 4.10.0-28-lowlatency…'
	        linux	/boot/vmlinuz-4.10.0-28-lowlatency root=UUID=c58fb225-8d2b-4ed5-80b8-3c80e481990a ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-28-lowlatency
	}
	menuentry 'Ubuntu, with Linux 4.10.0-28-lowlatency (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-lowlatency-recovery-c58fb225-8d2b-4ed5-80b8-3c80e481990a' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt5'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt5 --hint-efi=hd0,gpt5 --hint-baremetal=ahci0,gpt5  c58fb225-8d2b-4ed5-80b8-3c80e481990a
		else
		  search --no-floppy --fs-uuid --set=root c58fb225-8d2b-4ed5-80b8-3c80e481990a
		fi
		echo	'Chargement de Linux 4.10.0-28-lowlatency…'
	        linux	/boot/vmlinuz-4.10.0-28-lowlatency root=UUID=c58fb225-8d2b-4ed5-80b8-3c80e481990a ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-28-lowlatency
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-efi-7F0D-767D' {
	insmod part_gpt
	insmod fat
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  7F0D-767D
	else
	  search --no-floppy --fs-uuid --set=root 7F0D-767D
	fi
	chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

Dernière modification par CPascal (Le 15/09/2017, à 17:46)


Ubuntu Studio 16.04.LTS/Harrison Mixbus|Reaper|Fusion|Lightworks

Hors ligne

#23 Le 15/09/2017, à 18:05

??

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

C'est avec le gestionnaire de logiciels, pilote additionnel

La liste est donnée et celui qui est utilisé est coché.

La ligne est portant présente.

	linux	/boot/vmlinuz-4.10.0-33-lowlatency root=UUID=c58fb225-8d2b-4ed5-80b8-3c80e481990a ro   quiet splash $vt_handoff

Dernière modification par ?? (Le 15/09/2017, à 18:25)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#24 Le 15/09/2017, à 18:16

CPascal

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

Utilisation de serveur X X.org - pilote d'affichage Nouveau depuis xserver-org-video-nouveau(libre)


Ubuntu Studio 16.04.LTS/Harrison Mixbus|Reaper|Fusion|Lightworks

Hors ligne

#25 Le 15/09/2017, à 18:20

??

Re : [Résolu] pb driver carte NVIDIA GT 720 sous Ubuntu studio 16.04 LTS

Quels sont les libellés des pilotes propriètaires proposés?
Car actuellement tu utilises le pilote libre fourni par ubuntu qui s'appelle "nouveau"!

Dernière modification par ?? (Le 15/09/2017, à 18:31)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne