Contenu | Rechercher | Menus

Annonce

Ubuntu 16.04 LTS
Commandez vos DVD et clés USB Ubuntu-fr !

Pour en savoir un peu plus sur l'équipe du forum.

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

#1 Le 14/11/2017, à 23:24

shoshin38

[Résolu] Installation Ubuntu 16.04 OK puis ne démarre plus...

Bonsoir,

Après avoir décidé de passer à Ubuntu sur mon PC en remplacement de Windows, tout s'est ben déroulé avec un système en apparence opérationnel. Mais après le premier redémarrage, j'ai le message "INSERT BOOT MEDIA IN SELECTED BOOT DEVICE AND PRESS A KEY" puis "Reboot and select proper Boot device". J'ai vu également d'autres posts avec des erreurs similaires mais je n'ai pas réussi à m'en sortir... jJai par exemple tenté un bootrepair depuis un live DVD : cela corrige les choses pour le redémarrage suivant puis le problème revient...

Vous trouverez le lient vers le contenu de mon boot-info, en espérant que vous allez pouvoir m'aider.

Au plaisir,
Shoshin38

Dernière modification par shoshin38 (Le 18/11/2017, à 14:54)

Hors ligne

#2 Le 14/11/2017, à 23:54

??

Re : [Résolu] Installation Ubuntu 16.04 OK puis ne démarre plus...

Bonsoir
Si ton micro est un portable, il serait bon que tu donnes sa référence commerciale
Il se trouve que ton micro gère mal l'EFI

=================== efibootmgr -v
BootCurrent: 0003
Timeout: 2 seconds
BootOrder: 0000,0000,0004,2003,2001,2002
Boot0001* UEFI: Network Card 	PciRoot(0x0)/Pci(0x1c,0x3)/Pci(0x0,0x0)/MAC(0c54a5bced7b,0)/IPv4(0.0.0.0:0<->0.0.0.0:0,0,0)..BO
Boot0002* UEFI: Network Card 	PciRoot(0x0)/Pci(0x1c,0x3)/Pci(0x0,0x0)/MAC(0c54a5bced7b,0)/IPv6([::]:<->[::]:,0,0)..BO
Boot0003* UEFI: TSSTcorp CDDVDW SU-208FB	PciRoot(0x0)/Pci(0x1f,0x2)/Sata(5,65535,0)/CDROM(1,0xb7837,0x1240)..BO
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.

Le plus simple serait que tu regardes si tu peux positionner le bios en LEGACY; Si oui, tu fabriques une partition BIOS-BOOT de 1 MO  et tu lances une réparation via boot-repair


Inutile de répondre que vous allez faire le plus rapidement possible  l'action qui vous est demandée, vous perdez du temps à répondre, je perds du temps à consulter votre réponse. Pourtant c'est sympathique mais ce n'est pas pratique.
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Faire un état des lieux Avec https://doc.ubuntu-fr.org/tutoriel/boot-info

En ligne

#3 Le 15/11/2017, à 07:46

malbo

Re : [Résolu] Installation Ubuntu 16.04 OK puis ne démarre plus...

Bonjour,
Ton Boot-Info est là :

 Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/ubuntu/grub.cfg /EFI/Boot/bootx64.efi 
                       /EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi 
                       /EFI/ubuntu/mmx64.efi /EFI/ubuntu/shimx64.efi

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.3 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1   976,773,167   976,773,167  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sda1                 2,048     1,050,623     1,048,576 EFI System partition
/dev/sda2             1,050,624   968,564,735   967,514,112 Data partition (Linux)
/dev/sda3           968,564,736   976,771,071     8,206,336 Swap partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        909D-F85A                              vfat       
/dev/sda2        171de821-55b2-4137-9bc3-2234f5e7fc2d   ext4       
/dev/sda3        85c80ec9-833e-45eb-8ab5-e14223bf8437   swap       
/dev/sr0         2017-08-01-11-51-33-00                 iso9660    Ubuntu 16.04.3 LTS amd64

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Nov 14 22:03 ata-TOSHIBA_MQ01ABF050_Z336S8P7S -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 14 22:03 ata-TOSHIBA_MQ01ABF050_Z336S8P7S-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Nov 14 22:03 ata-TOSHIBA_MQ01ABF050_Z336S8P7S-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Nov 14 22:03 ata-TOSHIBA_MQ01ABF050_Z336S8P7S-part3 -> ../../sda3
lrwxrwxrwx 1 root root  9 Nov 14 21:53 ata-TSSTcorp_CDDVDW_SU-208FB_S11S6YIDB03AHJ -> ../../sr0
lrwxrwxrwx 1 root root  9 Nov 14 21:53 usb-Multiple_Card_Reader_058F63666485-0:0 -> ../../sdb
lrwxrwxrwx 1 root root  9 Nov 14 22:03 wwn-0x500003953588117b -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 14 22:03 wwn-0x500003953588117b-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Nov 14 22:03 wwn-0x500003953588117b-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Nov 14 22:03 wwn-0x500003953588117b-part3 -> ../../sda3

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sr0         /cdrom                   iso9660    (ro,noatime)


========================== sda1/EFI/ubuntu/grub.cfg: ===========================

--------------------------------------------------------------------------------
search.fs_uuid 171de821-55b2-4137-9bc3-2234f5e7fc2d root hd0,gpt2 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------

=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  171de821-55b2-4137-9bc3-2234f5e7fc2d
else
  search --no-floppy --fs-uuid --set=root 171de821-55b2-4137-9bc3-2234f5e7fc2d
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=en_US
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=10
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=menu
    set timeout=10
  # Fallback normal timeout code in case the timeout_style feature is
  # unavailable.
  else
    set timeout=10
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-171de821-55b2-4137-9bc3-2234f5e7fc2d' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  171de821-55b2-4137-9bc3-2234f5e7fc2d
	else
	  search --no-floppy --fs-uuid --set=root 171de821-55b2-4137-9bc3-2234f5e7fc2d
	fi
	linux	/boot/vmlinuz-4.10.0-38-generic.efi.signed root=UUID=171de821-55b2-4137-9bc3-2234f5e7fc2d ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.10.0-38-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-171de821-55b2-4137-9bc3-2234f5e7fc2d' {
	menuentry 'Ubuntu, with Linux 4.10.0-38-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-38-generic-advanced-171de821-55b2-4137-9bc3-2234f5e7fc2d' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  171de821-55b2-4137-9bc3-2234f5e7fc2d
		else
		  search --no-floppy --fs-uuid --set=root 171de821-55b2-4137-9bc3-2234f5e7fc2d
		fi
		echo	'Loading Linux 4.10.0-38-generic ...'
		linux	/boot/vmlinuz-4.10.0-38-generic.efi.signed root=UUID=171de821-55b2-4137-9bc3-2234f5e7fc2d ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.10.0-38-generic
	}
	menuentry 'Ubuntu, with Linux 4.10.0-38-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-38-generic-init-upstart-171de821-55b2-4137-9bc3-2234f5e7fc2d' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  171de821-55b2-4137-9bc3-2234f5e7fc2d
		else
		  search --no-floppy --fs-uuid --set=root 171de821-55b2-4137-9bc3-2234f5e7fc2d
		fi
		echo	'Loading Linux 4.10.0-38-generic ...'
		linux	/boot/vmlinuz-4.10.0-38-generic.efi.signed root=UUID=171de821-55b2-4137-9bc3-2234f5e7fc2d ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.10.0-38-generic
	}
	menuentry 'Ubuntu, with Linux 4.10.0-38-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-38-generic-recovery-171de821-55b2-4137-9bc3-2234f5e7fc2d' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  171de821-55b2-4137-9bc3-2234f5e7fc2d
		else
		  search --no-floppy --fs-uuid --set=root 171de821-55b2-4137-9bc3-2234f5e7fc2d
		fi
		echo	'Loading Linux 4.10.0-38-generic ...'
		linux	/boot/vmlinuz-4.10.0-38-generic.efi.signed root=UUID=171de821-55b2-4137-9bc3-2234f5e7fc2d ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.10.0-38-generic
	}
	menuentry 'Ubuntu, with Linux 4.10.0-28-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-advanced-171de821-55b2-4137-9bc3-2234f5e7fc2d' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  171de821-55b2-4137-9bc3-2234f5e7fc2d
		else
		  search --no-floppy --fs-uuid --set=root 171de821-55b2-4137-9bc3-2234f5e7fc2d
		fi
		echo	'Loading Linux 4.10.0-28-generic ...'
	        linux	/boot/vmlinuz-4.10.0-28-generic root=UUID=171de821-55b2-4137-9bc3-2234f5e7fc2d ro  quiet splash $vt_handoff
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.10.0-28-generic
	}
	menuentry 'Ubuntu, with Linux 4.10.0-28-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-init-upstart-171de821-55b2-4137-9bc3-2234f5e7fc2d' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  171de821-55b2-4137-9bc3-2234f5e7fc2d
		else
		  search --no-floppy --fs-uuid --set=root 171de821-55b2-4137-9bc3-2234f5e7fc2d
		fi
		echo	'Loading Linux 4.10.0-28-generic ...'
	        linux	/boot/vmlinuz-4.10.0-28-generic root=UUID=171de821-55b2-4137-9bc3-2234f5e7fc2d ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.10.0-28-generic
	}
	menuentry 'Ubuntu, with Linux 4.10.0-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-recovery-171de821-55b2-4137-9bc3-2234f5e7fc2d' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  171de821-55b2-4137-9bc3-2234f5e7fc2d
		else
		  search --no-floppy --fs-uuid --set=root 171de821-55b2-4137-9bc3-2234f5e7fc2d
		fi
		echo	'Loading Linux 4.10.0-28-generic ...'
	        linux	/boot/vmlinuz-4.10.0-28-generic root=UUID=171de821-55b2-4137-9bc3-2234f5e7fc2d ro recovery nomodeset 
		echo	'Loading initial ramdisk ...'
		initrd	/boot/initrd.img-4.10.0-28-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/25_custom ###

menuentry "EFI/ubuntu/fwupx64.efi" {
search --fs-uuid --no-floppy --set=root 909D-F85A
chainloader (${root})/EFI/ubuntu/fwupx64.efi
}

menuentry "EFI/ubuntu/mmx64.efi" {
search --fs-uuid --no-floppy --set=root 909D-F85A
chainloader (${root})/EFI/ubuntu/mmx64.efi
}
### END /etc/grub.d/25_custom ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=171de821-55b2-4137-9bc3-2234f5e7fc2d /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
#UUID=909D-F85A  /boot/efi       vfat    umask=0077      0       1
# swap was on /dev/sda3 during installation
UUID=85c80ec9-833e-45eb-8ab5-e14223bf8437 none            swap    sw              0       0
UUID=909D-F85A	/boot/efi	vfat	defaults	0	1
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 420.633735657 = 451.652034560  boot/grub/grub.cfg                             1
   2.023490906 = 2.172706816    boot/vmlinuz-4.10.0-28-generic                 1
 209.273666382 = 224.705888256  boot/vmlinuz-4.10.0-38-generic                 1
 209.390686035 = 224.831537152  boot/vmlinuz-4.10.0-38-generic.efi.signed      1
   2.023490906 = 2.172706816    vmlinuz                                        1
 209.555660248 = 225.008676864  boot/initrd.img-4.10.0-28-generic              2
 209.594623566 = 225.050513408  boot/initrd.img-4.10.0-38-generic              4
 209.555660248 = 225.008676864  initrd.img                                     2
 209.555660248 = 225.008676864  initrd.img.old                                 2

========= Devices which don't seem to have a corresponding hard drive: =========

sdb 

=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/5372/mounts) leaked on lvs invocation. Parent PID 12411: bash
File descriptor 63 (pipe:[47426]) leaked on lvs invocation. Parent PID 12411: bash

ADDITIONAL INFORMATION :
=================== log of boot-info 20171114_2203 ===================
boot-info version : 4ppa64
boot-sav version : 4ppa64
boot-sav-extra version : 4ppa64
glade2script version : 3.2.3~ppa4
Warning: Unable to open /dev/sr0 read-write (Read-only file system).  /dev/sr0 has been opened read-only.
boot-info is executed in live-session (Ubuntu 16.04.3 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
ls: cannot access '/home/usr/.config': No such file or directory

=================== os-prober:
/dev/sda2:Ubuntu 16.04.3 LTS (16.04):Ubuntu:linux

=================== blkid:
/dev/sda1: UUID="909D-F85A" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="7967a61d-88d4-4078-9040-0b751ba96563"
/dev/sda2: UUID="171de821-55b2-4137-9bc3-2234f5e7fc2d" TYPE="ext4" PARTUUID="7e8d8e45-151d-4231-b9e1-72d3a81e766a"
/dev/sr0: UUID="2017-08-01-11-51-33-00" LABEL="Ubuntu 16.04.3 LTS amd64" TYPE="iso9660" PTUUID="0d66cd15" PTTYPE="dos"
/dev/loop0: TYPE="squashfs"
/dev/sda3: UUID="85c80ec9-833e-45eb-8ab5-e14223bf8437" TYPE="swap" PARTUUID="c114deef-3cd4-4d95-8a46-622fe16f7833"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.

Presence of EFI/Boot file detected: /mnt/boot-sav/sda1/EFI/Boot/bootx64.efi

=================== sda2/etc/grub.d/ :
drwxr-xr-x  2 root root    4096 Nov 13 20:41 grub.d
total 84
-rwxr-xr-x 1 root root  9791 Jun 21 04:11 00_header
-rwxr-xr-x 1 root root  6258 Mar 15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 Jun 21 04:11 10_linux
-rwxr-xr-x 1 root root 11082 Jun 21 04:11 20_linux_xen
-rwxr-xr-x 1 root root  1992 Jan 28  2016 20_memtest86+
-rwxr-xr-x 1 root root   295 Nov 13 20:41 25_custom
-rwxr-xr-x 1 root root 11692 Jun 21 04:11 30_os-prober
-rwxr-xr-x 1 root root  1418 Jun 21 04:11 30_uefi-firmware
-rwxr-xr-x 1 root root   214 Jun 21 04:11 40_custom
-rwxr-xr-x 1 root root   216 Jun 21 04:11 41_custom
-rw-r--r-- 1 root root   483 Jun 21 04:11 README




=================== sda2/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda2: UUID=909D-F85A	 (sda1)

=================== efibootmgr -v
BootCurrent: 0003
Timeout: 2 seconds
BootOrder: 0000,0000,0004,2003,2001,2002
Boot0001* UEFI: Network Card 	PciRoot(0x0)/Pci(0x1c,0x3)/Pci(0x0,0x0)/MAC(0c54a5bced7b,0)/IPv4(0.0.0.0:0<->0.0.0.0:0,0,0)..BO
Boot0002* UEFI: Network Card 	PciRoot(0x0)/Pci(0x1c,0x3)/Pci(0x0,0x0)/MAC(0c54a5bced7b,0)/IPv6([::]:<->[::]:,0,0)..BO
Boot0003* UEFI: TSSTcorp CDDVDW SU-208FB	PciRoot(0x0)/Pci(0x1f,0x2)/Sata(5,65535,0)/CDROM(1,0xb7837,0x1240)..BO
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot disabled. (maybe sec-boot, Please report this message to boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sda1.
sda2	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda2.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:500GB:scsi:512:512:gpt:ATA TOSHIBA MQ01ABF0:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:496GB:495GB:ext4::;
3:496GB:500GB:4202MB:linux-swap(v1)::;

BYT;
/dev/sr0:1588MB:scsi:2048:2048:mac:TSSTcorp CDDVDW SU-208FB:;
1:2048B:6143B:4096B::Apple:;
2:1539MB:1542MB:2392kB::EFI:;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
sr0   rom  iso9660    1.5G Ubuntu 16.04.3 LTS amd64
loop0 loop squashfs   1.4G
sda   disk          465.8G
sda2  part ext4     461.4G
sda3  part swap       3.9G
sda1  part vfat       512M

KNAME ROTA RO RM STATE   MOUNTPOINT
sr0      1  0  1 running /cdrom
loop0    1  1  0         /rofs
sda      1  0  0 running
sda2     1  0  0         /mnt/boot-sav/sda2
sda3     1  0  0         [SWAP]
sda1     1  0  0         /mnt/boot-sav/sda1


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1961304k,nr_inodes=490326,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=395472k,mode=755)
/dev/sr0 on /cdrom type iso9660 (ro,noatime)
/dev/loop0 on /rofs type squashfs (ro,noatime)
aufs on / type aufs (rw,noatime,si=e77cb4005cccdfad)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=2875)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=395472k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw,relatime,data=ordered)


=================== ls:
/sys/block/sda (filtered):  alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 dvd dvdrw ecryptfs fb0 fd full fuse hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout toshiba_acpi uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 08 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 10 00 fe 03 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 5a f8 9d 90 4e  4f 20 4e 41 4d 45 20 20  |..)Z...NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     387M  6.2M  381M   2% /run
/dev/sr0       iso9660   1.5G  1.5G     0 100% /cdrom
/dev/loop0     squashfs  1.5G  1.5G     0 100% /rofs
aufs           aufs      1.9G   69M  1.9G   4% /
tmpfs          tmpfs     1.9G  224K  1.9G   1% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.9G     0  1.9G   0% /sys/fs/cgroup
tmpfs          tmpfs     1.9G  264K  1.9G   1% /tmp
tmpfs          tmpfs     387M   68K  387M   1% /run/user/999
/dev/sda1      vfat      511M  4.6M  507M   1% /mnt/boot-sav/sda1
/dev/sda2      ext4      454G  5.0G  426G   2% /mnt/boot-sav/sda2

=================== fdisk -l:
Disk /dev/loop0: 1.4 GiB, 1532116992 bytes, 2992416 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: DE240DC8-C014-4B33-8124-36CB5065DC4F

Device         Start       End   Sectors   Size Type
/dev/sda1       2048   1050623   1048576   512M EFI System
/dev/sda2    1050624 968564735 967514112 461.4G Linux filesystem
/dev/sda3  968564736 976771071   8206336   3.9G Linux swap




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    use-standard-efi-file


=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on sda1/efi/.../grub*.efi file!


=================== User settings
The settings chosen by the user will not act on the boot.

Pourrais-tu donner le nom commercial complet du modèle de ton ordi ?

Hors ligne

#4 Le 15/11/2017, à 10:24

shoshin38

Re : [Résolu] Installation Ubuntu 16.04 OK puis ne démarre plus...

Bonjour à tous,

Merci pour ces premières réponses. Comme demandé, je précise que mon ordinateur est un portable Toshiba Satellite Pro.

Hors ligne

#5 Le 15/11/2017, à 11:16

malbo

Re : [Résolu] Installation Ubuntu 16.04 OK puis ne démarre plus...

Depuis une session live (ordi démarré sur ton LiveDVD Ubuntu 16.04.3, choix "Try Ubuntu without installing"), je te prie de faire ce que j'explique dans ce post : https://forum.ubuntu-fr.org/viewtopic.p … #p19137961
Motif de cette demande : je t'ai demandé le nom "complet" du modèle de ton ordi et tu t'es contenté de noter "Toshiba Satellite Pro". C'est très insuffisant (*) et j'espère que la petite manip que je te demande permettra d'avoir plus d'informations.

(*) j'attendais une réponse comme par exemple "Toshiba Satellite Pro L70-A-13R" qu'on peut voir sur cette page

Dernière modification par malbo (Le 15/11/2017, à 11:27)

Hors ligne

#6 Le 15/11/2017, à 22:45

shoshin38

Re : [Résolu] Installation Ubuntu 16.04 OK puis ne démarre plus...

Bonsoir,

Désolé, je n'avais pas compris qu'il fallait ce détail, je vais tenter de faire mieux :


id:	
computer
description: 	Notebook
product: 	SATELLITE PRO C50-A-1KM (PSCGKE)
vendor: 	TOSHIBA
version: 	PSCGKE-00N016FR
serial: 	[REMOVED]
width: 	64 bits
capabilities: 	smbios-2.7 dmi-2.7 vsyscall32
configuration:	
boot	=	normal
chassis	=	notebook
family	=	PEGA Family
sku	=	PSCGKE
uuid	=	[REMOVED]
id:	
core
description: 	Motherboard
product: 	PT10S
vendor: 	TOSHIBA
physical id: 	
0
version: 	To be filled by O.E.M.
serial: 	[REMOVED]
slot: 	MIDDLE
id:	
firmware
description: 	BIOS
vendor: 	TOSHIBA
physical id: 	
0
version: 	1.10
date: 	11/20/2013
size: 	64KiB
capacity: 	4032KiB
capabilities: 	pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification uefi
id:	
cache:0
description: 	L1 cache
physical id: 	
25
slot: 	CPU Internal L1
size: 	128KiB
capacity: 	128KiB
capabilities: 	internal write-back
configuration:	
level	=	1
id:	
cache:1
description: 	L2 cache
physical id: 	
26
slot: 	CPU Internal L2
size: 	512KiB
capacity: 	512KiB
capabilities: 	internal write-back unified
configuration:	
level	=	2
id:	
cache:2
description: 	L3 cache
physical id: 	
27
slot: 	CPU Internal L3
size: 	3MiB
capacity: 	3MiB
capabilities: 	internal write-back unified
configuration:	
level	=	3
id:	
memory
description: 	System Memory
physical id: 	
28
slot: 	System board or motherboard
size: 	4GiB
id:	
bank
description: 	SODIMM DDR3 Synchronous 1600 MHz (0.6 ns)
product: 	HMT451S6MFR8A-PB
vendor: 	Hynix/Hyundai
physical id: 	
0
serial: 	[REMOVED]
slot: 	ChannelB-DIMM0
size: 	4GiB
width: 	64 bits
clock: 	1600MHz (0.6ns)
id:	
cpu
description: 	CPU
product: 	Intel(R) Core(TM) i3-4000M CPU @ 2.40GHz
vendor: 	Intel Corp.
physical id: 	
29
bus info: 	
cpu@0
version: 	Intel(R) Core(TM) i3-4000M CPU @ 2.40GHz
slot: 	SOCKET 0
size: 	2260MHz
capacity: 	3800MHz
width: 	64 bits
clock: 	100MHz
capabilities: 	x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer xsave avx f16c rdrand lahf_lm abm epb tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid xsaveopt dtherm arat pln pts cpufreq
configuration:	
cores	=	2
enabledcores	=	2
threads	=	4
id:	
pci
description: 	Host bridge
product: 	Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller
vendor: 	Intel Corporation
physical id: 	
100
bus info: 	
pci@0000:00:00.0
version: 	06
width: 	32 bits
clock: 	33MHz
id:	
display
description: 	VGA compatible controller
product: 	4th Gen Core Processor Integrated Graphics Controller
vendor: 	Intel Corporation
physical id: 	
2
bus info: 	
pci@0000:00:02.0
version: 	06
width: 	64 bits
clock: 	33MHz
capabilities: 	msi pm vga_controller bus_master cap_list rom
configuration:	
driver	=	i915
latency	=	0
resources:	
irq	:	26
memory	:	f7800000-f7bfffff
memory	:	e0000000-efffffff
ioport	:	f000(size=64)
memory	:	c0000-dffff
id:	
multimedia:0
description: 	Audio device
product: 	Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller
vendor: 	Intel Corporation
physical id: 	
3
bus info: 	
pci@0000:00:03.0
version: 	06
width: 	64 bits
clock: 	33MHz
capabilities: 	pm msi pciexpress bus_master cap_list
configuration:	
driver	=	snd_hda_intel
latency	=	0
resources:	
irq	:	29
memory	:	f7e14000-f7e17fff
id:	
usb:0
description: 	USB controller
product: 	8 Series/C220 Series Chipset Family USB xHCI
vendor: 	Intel Corporation
physical id: 	
14
bus info: 	
pci@0000:00:14.0
version: 	04
width: 	64 bits
clock: 	33MHz
capabilities: 	pm msi xhci bus_master cap_list
configuration:	
driver	=	xhci_hcd
latency	=	0
resources:	
irq	:	24
memory	:	f7e00000-f7e0ffff
id:	
usbhost:0
product: 	xHCI Host Controller
vendor: 	Linux 4.10.0-28-generic xhci-hcd
physical id: 	
0
bus info: 	
usb@3
logical name: 	
usb3
version: 	4.10
capabilities: 	usb-2.00
configuration:	
driver	=	hub
slots	=	14
speed	=	480Mbit/s
id:	
usb:0
description: 	Mass storage device
product: 	Flash Card Reader/Writer
vendor: 	Generic
physical id: 	
5
bus info: 	
usb@3:5
logical name: 	
scsi6
version: 	1.00
serial: 	[REMOVED]
capabilities: 	usb-2.01 scsi emulated scsi-host
configuration:	
driver	=	usb-storage
maxpower	=	100mA
speed	=	480Mbit/s
id:	
disk
description: 	SCSI Disk
product: 	Card Reader
vendor: 	Multiple
physical id: 	
0.0.0
bus info: 	
scsi@6:0.0.0
logical name: 	
/dev/sdb
version: 	1.00
serial: 	[REMOVED]
capabilities: 	removable
configuration:	
ansiversion	=	4
logicalsectorsize	=	512
sectorsize	=	512
id:	
medium
physical id: 	
0
logical name: 	
/dev/sdb
id:	
usb:1
description: 	Video
product: 	TOSHIBA Web Camera - HD
vendor: 	Chicony Electronics Co.,Ltd.
physical id: 	
a
bus info: 	
usb@3:a
version: 	57.36
serial: 	[REMOVED]
capabilities: 	usb-2.00
configuration:	
driver	=	uvcvideo
maxpower	=	500mA
speed	=	480Mbit/s
id:	
usbhost:1
product: 	xHCI Host Controller
vendor: 	Linux 4.10.0-28-generic xhci-hcd
physical id: 	
1
bus info: 	
usb@4
logical name: 	
usb4
version: 	4.10
capabilities: 	usb-3.00
configuration:	
driver	=	hub
slots	=	4
speed	=	5000Mbit/s
id:	
communication
description: 	Communication controller
product: 	8 Series/C220 Series Chipset Family MEI Controller #1
vendor: 	Intel Corporation
physical id: 	
16
bus info: 	
pci@0000:00:16.0
version: 	04
width: 	64 bits
clock: 	33MHz
capabilities: 	pm msi bus_master cap_list
configuration:	
driver	=	mei_me
latency	=	0
resources:	
irq	:	27
memory	:	f7e1e000-f7e1e00f
id:	
usb:1
description: 	USB controller
product: 	8 Series/C220 Series Chipset Family USB EHCI #2
vendor: 	Intel Corporation
physical id: 	
1a
bus info: 	
pci@0000:00:1a.0
version: 	04
width: 	32 bits
clock: 	33MHz
capabilities: 	pm debug ehci bus_master cap_list
configuration:	
driver	=	ehci-pci
latency	=	0
resources:	
irq	:	21
memory	:	f7e1c000-f7e1c3ff
id:	
usbhost
product: 	EHCI Host Controller
vendor: 	Linux 4.10.0-28-generic ehci_hcd
physical id: 	
1
bus info: 	
usb@1
logical name: 	
usb1
version: 	4.10
capabilities: 	usb-2.00
configuration:	
driver	=	hub
slots	=	2
speed	=	480Mbit/s
id:	
usb
description: 	USB hub
vendor: 	Intel Corp.
physical id: 	
1
bus info: 	
usb@1:1
version: 	0.04
capabilities: 	usb-2.00
configuration:	
driver	=	hub
slots	=	6
speed	=	480Mbit/s
id:	
usb
description: 	Bluetooth wireless interface
vendor: 	Toshiba Corp.
physical id: 	
2
bus info: 	
usb@1:1.2
version: 	0.02
capabilities: 	bluetooth usb-1.10
configuration:	
driver	=	btusb
maxpower	=	100mA
speed	=	12Mbit/s
id:	
multimedia:1
description: 	Audio device
product: 	8 Series/C220 Series Chipset High Definition Audio Controller
vendor: 	Intel Corporation
physical id: 	
1b
bus info: 	
pci@0000:00:1b.0
version: 	04
width: 	64 bits
clock: 	33MHz
capabilities: 	pm msi pciexpress bus_master cap_list
configuration:	
driver	=	snd_hda_intel
latency	=	0
resources:	
irq	:	28
memory	:	f7e10000-f7e13fff
id:	
pci:0
description: 	PCI bridge
product: 	8 Series/C220 Series Chipset Family PCI Express Root Port #1
vendor: 	Intel Corporation
physical id: 	
1c
bus info: 	
pci@0000:00:1c.0
version: 	d4
width: 	32 bits
clock: 	33MHz
capabilities: 	pci pciexpress msi pm normal_decode bus_master cap_list
configuration:	
driver	=	pcieport
resources:	
irq	:	16
ioport	:	2000(size=4096)
memory	:	df200000-df3fffff
ioport	:	df400000(size=2097152)
id:	
pci:1
description: 	PCI bridge
product: 	8 Series/C220 Series Chipset Family PCI Express Root Port #3
vendor: 	Intel Corporation
physical id: 	
1c.2
bus info: 	
pci@0000:00:1c.2
version: 	d4
width: 	32 bits
clock: 	33MHz
capabilities: 	pci pciexpress msi pm normal_decode bus_master cap_list
configuration:	
driver	=	pcieport
resources:	
irq	:	18
memory	:	f7d00000-f7dfffff
id:	
network
description: 	Wireless interface
product: 	QCA9565 / AR9565 Wireless Network Adapter
vendor: 	Qualcomm Atheros
physical id: 	
0
bus info: 	
pci@0000:02:00.0
logical name: 	
wlp2s0
version: 	01
serial: 	[REMOVED]
width: 	64 bits
clock: 	33MHz
capabilities: 	pm msi pciexpress bus_master cap_list rom ethernet physical wireless
configuration:	
broadcast	=	yes
driver	=	ath9k
driverversion	=	4.10.0-28-generic
firmware	=	N/A
ip	=	[REMOVED]
latency	=	0
link	=	yes
multicast	=	yes
wireless	=	IEEE 802.11
resources:	
irq	:	18
memory	:	f7d00000-f7d7ffff
memory	:	f7d80000-f7d8ffff
id:	
pci:2
description: 	PCI bridge
product: 	8 Series/C220 Series Chipset Family PCI Express Root Port #4
vendor: 	Intel Corporation
physical id: 	
1c.3
bus info: 	
pci@0000:00:1c.3
version: 	d4
width: 	32 bits
clock: 	33MHz
capabilities: 	pci pciexpress msi pm normal_decode bus_master cap_list
configuration:	
driver	=	pcieport
resources:	
irq	:	19
ioport	:	e000(size=4096)
memory	:	f7c00000-f7cfffff
id:	
network
description: 	Ethernet interface
product: 	QCA8171 Gigabit Ethernet
vendor: 	Qualcomm Atheros
physical id: 	
0
bus info: 	
pci@0000:03:00.0
logical name: 	
enp3s0
version: 	10
serial: 	[REMOVED]
capacity: 	1Gbit/s
width: 	64 bits
clock: 	33MHz
capabilities: 	pm pciexpress msi msix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration:	
autonegotiation	=	on
broadcast	=	yes
driver	=	alx
latency	=	0
link	=	no
multicast	=	yes
port	=	twisted pair
resources:	
irq	:	19
memory	:	f7c00000-f7c3ffff
ioport	:	e000(size=128)
id:	
usb:2
description: 	USB controller
product: 	8 Series/C220 Series Chipset Family USB EHCI #1
vendor: 	Intel Corporation
physical id: 	
1d
bus info: 	
pci@0000:00:1d.0
version: 	04
width: 	32 bits
clock: 	33MHz
capabilities: 	pm debug ehci bus_master cap_list
configuration:	
driver	=	ehci-pci
latency	=	0
resources:	
irq	:	23
memory	:	f7e1b000-f7e1b3ff
id:	
usbhost
product: 	EHCI Host Controller
vendor: 	Linux 4.10.0-28-generic ehci_hcd
physical id: 	
1
bus info: 	
usb@2
logical name: 	
usb2
version: 	4.10
capabilities: 	usb-2.00
configuration:	
driver	=	hub
slots	=	2
speed	=	480Mbit/s
id:	
usb
description: 	USB hub
vendor: 	Intel Corp.
physical id: 	
1
bus info: 	
usb@2:1
version: 	0.04
capabilities: 	usb-2.00
configuration:	
driver	=	hub
slots	=	8
speed	=	480Mbit/s
id:	
isa
description: 	ISA bridge
product: 	HM86 Express LPC Controller
vendor: 	Intel Corporation
physical id: 	
1f
bus info: 	
pci@0000:00:1f.0
version: 	04
width: 	32 bits
clock: 	33MHz
capabilities: 	isa bus_master cap_list
configuration:	
driver	=	lpc_ich
latency	=	0
resources:	
irq	:	0
id:	
storage
description: 	SATA controller
product: 	8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode]
vendor: 	Intel Corporation
physical id: 	
1f.2
bus info: 	
pci@0000:00:1f.2
version: 	04
width: 	32 bits
clock: 	66MHz
capabilities: 	storage msi pm ahci_1.0 bus_master cap_list
configuration:	
driver	=	ahci
latency	=	0
resources:	
irq	:	25
ioport	:	f0b0(size=8)
ioport	:	f0a0(size=4)
ioport	:	f090(size=8)
ioport	:	f080(size=4)
ioport	:	f060(size=32)
memory	:	f7e1a000-f7e1a7ff
id:	
serial
description: 	SMBus
product: 	8 Series/C220 Series Chipset Family SMBus Controller
vendor: 	Intel Corporation
physical id: 	
1f.3
bus info: 	
pci@0000:00:1f.3
version: 	04
width: 	64 bits
clock: 	33MHz
configuration:	
latency	=	0
resources:	
memory	:	f7e19000-f7e190ff
ioport	:	f040(size=32)
id:	
scsi:0
physical id: 	
1
logical name: 	
scsi4
capabilities: 	emulated
id:	
disk
description: 	ATA Disk
product: 	TOSHIBA MQ01ABF0
vendor: 	Toshiba
physical id: 	
0.0.0
bus info: 	
scsi@4:0.0.0
logical name: 	
/dev/sda
version: 	3M
serial: 	[REMOVED]
size: 	465GiB (500GB)
capabilities: 	gpt-1.00 partitioned partitioned:gpt
configuration:	
ansiversion	=	5
guid	=	de240dc8-c014-4b33-8124-36cb5065dc4f
logicalsectorsize	=	512
sectorsize	=	512
id:	
volume:0
description: 	Windows FAT volume
vendor: 	mkfs.fat
physical id: 	
1
bus info: 	
scsi@4:0.0.0,1
logical name: 	
/dev/sda1
version: 	FAT32
serial: 	[REMOVED]
size: 	510MiB
capacity: 	511MiB
capabilities: 	boot fat initialized
configuration:	
FATs	=	2
filesystem	=	fat
name	=	EFI System Partition
id:	
volume:1
description: 	EXT4 volume
vendor: 	Linux
physical id: 	
2
bus info: 	
scsi@4:0.0.0,2
logical name: 	
/dev/sda2
version: 	1.0
serial: 	[REMOVED]
size: 	461GiB
capabilities: 	journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration:	
created	=	2017-11-13 06:24:43
filesystem	=	ext4
lastmountpoint	=	/mnt/boot-sav/sda2
modified	=	2017-11-14 22:04:28
mounted	=	2017-11-14 22:04:04
state	=	clean
id:	
volume:2
description: 	Linux swap volume
vendor: 	Linux
physical id: 	
3
bus info: 	
scsi@4:0.0.0,3
logical name: 	
/dev/sda3
version: 	1
serial: 	[REMOVED]
size: 	4006MiB
capacity: 	4006MiB
capabilities: 	nofs swap initialized
configuration:	
filesystem	=	swap
pagesize	=	4095
id:	
scsi:1
physical id: 	
2
logical name: 	
scsi5
capabilities: 	emulated
id:	
cdrom
description: 	DVD-RAM writer
product: 	CDDVDW SU-208FB
vendor: 	TSSTcorp
physical id: 	
0.0.0
bus info: 	
scsi@5:0.0.0
logical name: 	
/dev/cdrom
logical name: 	
/dev/cdrw
logical name: 	
/dev/dvd
logical name: 	
/dev/dvdrw
logical name: 	
/dev/sr0
logical name: 	
/cdrom
version: 	TF01
capabilities: 	removable audio cd-r cd-rw dvd dvd-r dvd-ram
configuration:	
ansiversion	=	5
mount.fstype	=	iso9660
mount.options	=	ro,noatime
state	=	mounted
status	=	ready
id:	
medium
physical id: 	
0
logical name: 	
/dev/cdrom
logical name: 	
/cdrom
capabilities: 	partitioned partitioned:dos
configuration:	
mount.fstype	=	iso9660
mount.options	=	ro,noatime
signature	=	0d66cd15
state	=	mounted
id:	
volume
description: 	Windows FAT volume
vendor: 	mkfs.fat
physical id: 	
2
version: 	FAT12
serial: 	[REMOVED]
size: 	15EiB
capabilities: 	primary boot fat initialized
configuration:	
FATs	=	2
filesystem	=	fat

Hors ligne

#7 Le 15/11/2017, à 23:17

??

Re : [Résolu] Installation Ubuntu 16.04 OK puis ne démarre plus...

Bonsoir,
un exemple d'installation réussi sur le même modèle que le tien
Satellite pro C50-A-1KM https://forum.ubuntu-fr.org/viewtopic.php?id=1578941
Tu peux parcourir pour voir

J'ai l'impression que boot-repair re refabrique pas les fichiers de boot de Windows lorsque windows n'est pas détecté.

Je suis actuellement avec un ipad et je ne peux te dire exactement ce qu'il va falloir fabriquer,
je renouvelle ma demande de mettre le bios en legacy.

Dernière modification par ?? (Le 15/11/2017, à 23:31)


Inutile de répondre que vous allez faire le plus rapidement possible  l'action qui vous est demandée, vous perdez du temps à répondre, je perds du temps à consulter votre réponse. Pourtant c'est sympathique mais ce n'est pas pratique.
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Faire un état des lieux Avec https://doc.ubuntu-fr.org/tutoriel/boot-info

En ligne

#8 Le 16/11/2017, à 09:23

malbo

Re : [Résolu] Installation Ubuntu 16.04 OK puis ne démarre plus...

Bonjour,
C'est pour ça que je m'échine à demander toujours et toujours le nom complet du modèle d'ordi. Comme on voit "product: SATELLITE PRO C50-A-1KM (PSCGKE)" dans ton post, il suffit de chercher "C50-A-1KM" dans la Liste des portables « Toshiba », et on peut constater qu'il existe déjà une ligne pour ce modèle qui renvoie vers ce fil : https://forum.ubuntu-fr.org/viewtopic.php?id=1578941 (c'est en procédant comme ça que ?? a pu te donner son exemple d'installation réussie). Il ne s'agit pas d'installer la même version que dans le fil mais d'en retirer que ce modèle est déjà ancien et que la version 16.04 est bien celle qui convient à ton modèle.
Quant au mode d'installation, comme tu n'as pas de dual-boot mais que tu veux Ubuntu seul dans l'ordi, je suis d'accord avec la suggestion faite par ?? de faire une installation en mode Legacy (c'est à dire mode Bios traditionnel). Pour ce faire, contrairement à la proposition de ??, je te propose de faire une installation toute neuve en suivant les indications de ce post : https://forum.ubuntu-fr.org/viewtopic.p … #p18232161
A l'issue de cette procédure, tu auras une nouvelle table de partition de type MSDOS (au lieu du type GPT actuel) et évidemment tout ce qu'il y a actuellement sur ton disque dur aura été effacé. Le partitionnement aura été fait automatiquement par l'installateur.

Dernière modification par malbo (Le 16/11/2017, à 09:42)

Hors ligne

#9 Le 17/11/2017, à 09:29

shoshin38

Re : [Résolu] Installation Ubuntu 16.04 OK puis ne démarre plus...

Bonjour à tous,

J'ai donc fait l'installation en mode Legacy et vu que te doute façon je n'avais rien configuré de particulier, j'ai tout effacé et fait une nouvelle installation : tout fonctionne très bien maintenant.

En fait, quand j'ai rencontré la difficulté j'étais sur la bonne piste car ma première action avais été de désactiver le boot sécurisé dans le bios, mais je ne connaissais pas ces possibilités complémentaires de boot Legacy ou pas... merci de vos conseils et au plaisir!

Hors ligne

#10 Le 17/11/2017, à 09:56

malbo

Re : [Résolu] Installation Ubuntu 16.04 OK puis ne démarre plus...

Bonjour,
Je souhaiterais ajouter ton expérience dans la ligne "Pro C50-A-1KM" de la Liste des portables « Toshiba ». Pour qu'on ait l'état final de ton install, je te prie de faire un Boot-Info depuis une session de ton Ubuntu installé en suivant mes indications de ce post #55 : https://forum.ubuntu-fr.org/viewtopic.p … #p21826722

Dernière modification par malbo (Le 17/11/2017, à 09:57)

Hors ligne

#11 Le 18/11/2017, à 07:34

shoshin38

Re : [Résolu] Installation Ubuntu 16.04 OK puis ne démarre plus...

Bonjour,

Avec plaisir, voici les éléments de mon bootinfo après correction du problème : http://paste.ubuntu.com/25986177/

Merci encore

Hors ligne

#12 Le 18/11/2017, à 08:51

malbo

Re : [Résolu] Installation Ubuntu 16.04 OK puis ne démarre plus...

Ton Boot-Info est là :

 Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 16.04.3 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048   968,564,735   968,562,688  83 Linux
/dev/sda2         968,566,782   976,771,071     8,204,290   5 Extended
/dev/sda5         968,566,784   976,771,071     8,204,288  82 Linux swap / Solaris


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        4f2fed67-53c2-4900-afaa-2ada2cdcb6c9   ext4       
/dev/sda5        4e492dd1-959d-4768-8b87-c302be58bc68   swap       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Nov 18 07:27 ata-TOSHIBA_MQ01ABF050_Z336S8P7S -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 18 07:27 ata-TOSHIBA_MQ01ABF050_Z336S8P7S-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Nov 18 07:27 ata-TOSHIBA_MQ01ABF050_Z336S8P7S-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Nov 18 07:27 ata-TOSHIBA_MQ01ABF050_Z336S8P7S-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 Nov 18 07:12 ata-TSSTcorp_CDDVDW_SU-208FB_S11S6YIDB03AHJ -> ../../sr0
lrwxrwxrwx 1 root root  9 Nov 18 07:12 usb-Multiple_Card_Reader_058F63666485-0:0 -> ../../sdb
lrwxrwxrwx 1 root root  9 Nov 18 07:27 wwn-0x500003953588117b -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 18 07:27 wwn-0x500003953588117b-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Nov 18 07:27 wwn-0x500003953588117b-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Nov 18 07:27 wwn-0x500003953588117b-part5 -> ../../sda5

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  4f2fed67-53c2-4900-afaa-2ada2cdcb6c9
else
  search --no-floppy --fs-uuid --set=root 4f2fed67-53c2-4900-afaa-2ada2cdcb6c9
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=0
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 0 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-4f2fed67-53c2-4900-afaa-2ada2cdcb6c9' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  4f2fed67-53c2-4900-afaa-2ada2cdcb6c9
	else
	  search --no-floppy --fs-uuid --set=root 4f2fed67-53c2-4900-afaa-2ada2cdcb6c9
	fi
        linux	/boot/vmlinuz-4.10.0-28-generic root=UUID=4f2fed67-53c2-4900-afaa-2ada2cdcb6c9 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.10.0-28-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-4f2fed67-53c2-4900-afaa-2ada2cdcb6c9' {
	menuentry 'Ubuntu, avec Linux 4.10.0-28-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-advanced-4f2fed67-53c2-4900-afaa-2ada2cdcb6c9' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  4f2fed67-53c2-4900-afaa-2ada2cdcb6c9
		else
		  search --no-floppy --fs-uuid --set=root 4f2fed67-53c2-4900-afaa-2ada2cdcb6c9
		fi
		echo	'Chargement de Linux 4.10.0-28-generic…'
	        linux	/boot/vmlinuz-4.10.0-28-generic root=UUID=4f2fed67-53c2-4900-afaa-2ada2cdcb6c9 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-28-generic
	}
	menuentry 'Ubuntu, with Linux 4.10.0-28-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-init-upstart-4f2fed67-53c2-4900-afaa-2ada2cdcb6c9' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  4f2fed67-53c2-4900-afaa-2ada2cdcb6c9
		else
		  search --no-floppy --fs-uuid --set=root 4f2fed67-53c2-4900-afaa-2ada2cdcb6c9
		fi
		echo	'Chargement de Linux 4.10.0-28-generic…'
	        linux	/boot/vmlinuz-4.10.0-28-generic root=UUID=4f2fed67-53c2-4900-afaa-2ada2cdcb6c9 ro  quiet splash $vt_handoff init=/sbin/upstart
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-28-generic
	}
	menuentry 'Ubuntu, with Linux 4.10.0-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-recovery-4f2fed67-53c2-4900-afaa-2ada2cdcb6c9' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  4f2fed67-53c2-4900-afaa-2ada2cdcb6c9
		else
		  search --no-floppy --fs-uuid --set=root 4f2fed67-53c2-4900-afaa-2ada2cdcb6c9
		fi
		echo	'Chargement de Linux 4.10.0-28-generic…'
	        linux	/boot/vmlinuz-4.10.0-28-generic root=UUID=4f2fed67-53c2-4900-afaa-2ada2cdcb6c9 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.10.0-28-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  4f2fed67-53c2-4900-afaa-2ada2cdcb6c9
	else
	  search --no-floppy --fs-uuid --set=root 4f2fed67-53c2-4900-afaa-2ada2cdcb6c9
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  4f2fed67-53c2-4900-afaa-2ada2cdcb6c9
	else
	  search --no-floppy --fs-uuid --set=root 4f2fed67-53c2-4900-afaa-2ada2cdcb6c9
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=4f2fed67-53c2-4900-afaa-2ada2cdcb6c9 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=4e492dd1-959d-4768-8b87-c302be58bc68 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 104.127346039 = 111.805886464  boot/grub/grub.cfg                             1
 436.143043518 = 468.305027072  boot/grub/i386-pc/core.img                     1
   1.546928406 = 1.661001728    boot/vmlinuz-4.10.0-28-generic                 1
   1.546928406 = 1.661001728    vmlinuz                                        1
 104.133140564 = 111.812108288  boot/initrd.img-4.10.0-28-generic              3
 104.133140564 = 111.812108288  initrd.img                                     3

========= Devices which don't seem to have a corresponding hard drive: =========

sdb 


ADDITIONAL INFORMATION :
=================== log of boot-info 20171118_0727 ===================
boot-info version : 4ppa64
boot-sav version : 4ppa64
boot-sav-extra version : 4ppa64
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 16.04.3 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s):        32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.10.0-28-generic root=UUID=4f2fed67-53c2-4900-afaa-2ada2cdcb6c9 ro quiet splash vt.handoff=7

=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 16.04.3 LTS CurrentSession:linux

=================== blkid:
/dev/sda1: UUID="4f2fed67-53c2-4900-afaa-2ada2cdcb6c9" TYPE="ext4" PARTUUID="a7ee4f41-01"
/dev/sda5: UUID="4e492dd1-959d-4768-8b87-c302be58bc68" TYPE="swap" PARTUUID="a7ee4f41-05"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root    4096 août   1 13:28 grub.d
total 80
-rwxr-xr-x 1 root root  9791 juin  21 06:11 00_header
-rwxr-xr-x 1 root root  6258 mars  15  2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 juin  21 06:11 10_linux
-rwxr-xr-x 1 root root 11082 juin  21 06:11 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 juin  21 06:11 30_os-prober
-rwxr-xr-x 1 root root  1418 juin  21 06:11 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juin  21 06:11 40_custom
-rwxr-xr-x 1 root root   216 juin  21 06:11 41_custom
-rw-r--r-- 1 root root   483 juin  21 06:11 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, .

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:500GB:scsi:512:512:msdos:ATA TOSHIBA MQ01ABF0:;
1:1049kB:496GB:496GB:ext4::boot;
2:496GB:500GB:4201MB:::;
5:496GB:500GB:4201MB:linux-swap(v1)::;

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sr0   rom          1024M
sda   disk        465,8G
sda2  part            1K
sda5  part swap     3,9G
sda1  part ext4   461,9G

KNAME ROTA RO RM STATE   MOUNTPOINT
sr0      1  0  1 running
sda      1  0  0 running
sda2     1  0  0
sda5     1  0  0         [SWAP]
sda1     1  0  0         /


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1955164k,nr_inodes=488791,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=395488k,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=26,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=1674)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /run/user/1001 type tmpfs (rw,nosuid,nodev,relatime,size=395488k,mode=700,uid=1001,gid=1001)
gvfsd-fuse on /run/user/1001/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1001,group_id=1001)


=================== ls:
/sys/block/sda (filtered):  alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 dvd dvdrw ecryptfs fb0 fd full fuse hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 initctl input kmsg kvm lightnvm log mapper mcelog media0 mei0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sdb sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout toshiba_acpi uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper:  control

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     387M  6.2M  381M   2% /run
/dev/sda1      ext4      455G  4.5G  427G   2% /
tmpfs          tmpfs     1.9G  472K  1.9G   1% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     1.9G     0  1.9G   0% /sys/fs/cgroup
tmpfs          tmpfs     387M  128K  387M   1% /run/user/1001

=================== fdisk -l:
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xa7ee4f41

Device     Boot     Start       End   Sectors   Size Id Type
/dev/sda1  *         2048 968564735 968562688 461.9G 83 Linux
/dev/sda2       968566782 976771071   8204290   3.9G  5 Extended
/dev/sda5       968566784 976771071   8204288   3.9G 82 Linux swap / Solaris




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s


=================== Final advice in case of suggested repair


Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 16.04.3 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.

Cette installation est parfaite et elle est bien conforme à ce que j'avais proposé dans le post #8 (je pense que tu as suivi à la lettre les indications de ce lien)
Tu as bien obtenu une installation en mode Bios traditionnel comme c'est noté en clair dans cet extrait (is not in EFI-mode) :

=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.

EDIT : je viens de compléter la ligne du modèle "Pro C50-A-1KM" dans la Liste des portables « Toshiba » pour y noter ton expérience réussie.
Je te prie de fermer la présente discussion en procédant comme suit :
1) te connecter sur le forum
2) cliquer sur "Modifier" en bas à droite de ton PREMIER post
3) modifier le titre de la discussion pour qu'il devienne :

[Résolu] Installation Ubuntu 16.04 OK puis ne démarre plus... 

Dernière modification par malbo (Le 18/11/2017, à 09:13)

Hors ligne