#1 Le 14/11/2017, à 14:17
- yaniselmalki
L'installation d'ubuntu ne se complète pas
Bonjour,
J'ai installé Ubuntu sur mon PC portable en écrasant W10. Le problème est à chaque fois que je redémarre l'ordinateur, il me fait repasser par le système d'installation (je dois choisir si je veut essayer Ubuntu ou l'installer) et quand je quitte le programme d'installation, j'arrive sur une session d'Ubuntu à peu près fonctionnelle. Mais si je modifie des réglages sur cette session (la langue en l'occurence), quand je redémarre l'orinateur j'ai le même problème et quand je ferme le programme d'installation, je retrouve une session aux réglages par défaut (langue en anglais). Que faire?!?
Merci d'avance,
Yanis
Hors ligne
#2 Le 14/11/2017, à 14:45
- Mininux MiniCraft
Re : L'installation d'ubuntu ne se complète pas
Bonjour,
De quelle manière as-tu installé ubuntu? Est-ce que tu lance ta session depuis une clé usb ou un cd?
Il n'y a PAS de limite à Linux.
Windows EST limité : seul Microsoft décide de ce que l'on peut faire dessus
Hors ligne
#3 Le 14/11/2017, à 14:55
- yaniselmalki
Re : L'installation d'ubuntu ne se complète pas
Je le lance depuis une clé USB.
Hors ligne
#4 Le 14/11/2017, à 15:04
- Nasman
Re : L'installation d'ubuntu ne se complète pas
Et en enlevant la clé ?
PC fixe sous Bionic 64 bits et portable avec Focal 64 bits
Hors ligne
#5 Le 14/11/2017, à 15:23
- Mininux MiniCraft
Re : L'installation d'ubuntu ne se complète pas
Depuis une clé usb?! Ce n'est pas une installation! C'est ce que l'on appelle un live-usb, comme l'a dit Nasman il faut enlever ta clé avant le démarrage, tout devrait rentrer dans l'ordre ... si tu as déjà lancé l'installation depuis cette clé usb bien sûr.
Il n'y a PAS de limite à Linux.
Windows EST limité : seul Microsoft décide de ce que l'on peut faire dessus
Hors ligne
#6 Le 14/11/2017, à 16:08
- LukePerp
Re : L'installation d'ubuntu ne se complète pas
J'ai déjà rencontré cette situation dans mon entourage... Ça nous fait rire mais eux moins.
Desktop & Laptop - Ubuntu Mate dernière LTS - Intel i5 - 16 Go - Dual boot Windows offline
Hors ligne
#7 Le 14/11/2017, à 19:04
- yaniselmalki
Re : L'installation d'ubuntu ne se complète pas
Quand je l'éteins, retire la clé USB et l'allume ça me fait "The selected boot device failed. Press <Enter> to continue.". Et quand je presse enter ça arrête l'ordinateur.
Hors ligne
#8 Le 14/11/2017, à 20:03
- LukePerp
Re : L'installation d'ubuntu ne se complète pas
Quand je l'éteins, retire la clé USB et l'allume ça me fait "The selected boot device failed. Press <Enter> to continue.". Et quand je presse enter ça arrête l'ordinateur.
Je suppose que tu n'as pas installé Ubuntu...
Peux tu nous transmettre un rapport boot info (voir la documentation) stp
Desktop & Laptop - Ubuntu Mate dernière LTS - Intel i5 - 16 Go - Dual boot Windows offline
Hors ligne
#9 Le 14/11/2017, à 20:33
- yaniselmalki
Re : L'installation d'ubuntu ne se complète pas
Hors ligne
#10 Le 14/11/2017, à 23:09
- LukePerp
Re : L'installation d'ubuntu ne se complète pas
Le rapport semble montrer un système sain. Tu as bien installé ubuntu. Alors je pense que ton bios est mal configuré quant à l'ordre de boot. Va dans le bios et définis de booter sur le disque ata-ST100....
Desktop & Laptop - Ubuntu Mate dernière LTS - Intel i5 - 16 Go - Dual boot Windows offline
Hors ligne
#11 Le 14/11/2017, à 23:15
- yaniselmalki
Re : L'installation d'ubuntu ne se complète pas
Va dans le bios et définis de booter sur le disque ata-ST100....
En plus détaillé ça donne quoi svp?
Hors ligne
#12 Le 15/11/2017, à 09:58
- malbo
Re : L'installation d'ubuntu ne se complète pas
Bonjour,
Ton Boot-Info ( http://paste.ubuntu.com/25962483/ ) est là :
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Syslinux MBR (5.00 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system:
Boot sector type: Unknown
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 6.03 2014-10-06................................................2....0............A20 gate n
Boot sector info: Syslinux looks at sector 5231104 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
No errors found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/casper/vmlinuz.efi /EFI/BOOT/grubx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sda1 2,048 1,050,623 1,048,576 EFI System partition
/dev/sda2 1,050,624 1,945,368,575 1,944,317,952 Data partition (Linux)
/dev/sda3 1,945,368,576 1,953,523,711 8,155,136 Swap partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 7.4 GiB, 7918845952 bytes, 15466496 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 15,466,495 15,464,448 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1
/dev/sda2 f3b4b546-7543-4610-a448-95dbf7dbe9a2 ext4
/dev/sda3 6176ac90-b44f-4afc-9ac9-74f2db2a8698 swap
/dev/sdb1 B811-320B vfat MYLINUXLIVE
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Nov 14 18:31 ata-ST1000LM024_HN-M101MBB_S30CJL0J300410 -> ../../sda
lrwxrwxrwx 1 root root 10 Nov 14 18:31 ata-ST1000LM024_HN-M101MBB_S30CJL0J300410-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Nov 14 18:31 ata-ST1000LM024_HN-M101MBB_S30CJL0J300410-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Nov 14 18:31 ata-ST1000LM024_HN-M101MBB_S30CJL0J300410-part3 -> ../../sda3
lrwxrwxrwx 1 root root 9 Nov 14 18:23 ata-hp_DVDRW_GUE1N_KW6H5RB0923 -> ../../sr0
lrwxrwxrwx 1 root root 9 Nov 14 18:31 usb-_USB_DISK_3.0_070A6120C5469F42-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Nov 14 18:31 usb-_USB_DISK_3.0_070A6120C5469F42-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 9 Nov 14 18:23 wwn-0x5001480000000000 -> ../../sr0
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 f3b4b546-7543-4610-a448-95dbf7dbe9a2
else
search --no-floppy --fs-uuid --set=root f3b4b546-7543-4610-a448-95dbf7dbe9a2
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=hidden
set timeout=0
# Fallback hidden-timeout code in case the timeout_style feature is
# unavailable.
elif sleep --interruptible 0 ; then
set timeout=0
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-f3b4b546-7543-4610-a448-95dbf7dbe9a2' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 f3b4b546-7543-4610-a448-95dbf7dbe9a2
else
search --no-floppy --fs-uuid --set=root f3b4b546-7543-4610-a448-95dbf7dbe9a2
fi
linux /boot/vmlinuz-4.10.0-28-generic.efi.signed root=UUID=f3b4b546-7543-4610-a448-95dbf7dbe9a2 ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.10.0-28-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-f3b4b546-7543-4610-a448-95dbf7dbe9a2' {
menuentry 'Ubuntu, avec Linux 4.10.0-28-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-advanced-f3b4b546-7543-4610-a448-95dbf7dbe9a2' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 f3b4b546-7543-4610-a448-95dbf7dbe9a2
else
search --no-floppy --fs-uuid --set=root f3b4b546-7543-4610-a448-95dbf7dbe9a2
fi
echo 'Chargement de Linux 4.10.0-28-generic…'
linux /boot/vmlinuz-4.10.0-28-generic.efi.signed root=UUID=f3b4b546-7543-4610-a448-95dbf7dbe9a2 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.10.0-28-generic
}
menuentry 'Ubuntu, with Linux 4.10.0-28-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-init-upstart-f3b4b546-7543-4610-a448-95dbf7dbe9a2' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 f3b4b546-7543-4610-a448-95dbf7dbe9a2
else
search --no-floppy --fs-uuid --set=root f3b4b546-7543-4610-a448-95dbf7dbe9a2
fi
echo 'Chargement de Linux 4.10.0-28-generic…'
linux /boot/vmlinuz-4.10.0-28-generic.efi.signed root=UUID=f3b4b546-7543-4610-a448-95dbf7dbe9a2 ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.10.0-28-generic
}
menuentry 'Ubuntu, with Linux 4.10.0-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-recovery-f3b4b546-7543-4610-a448-95dbf7dbe9a2' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 f3b4b546-7543-4610-a448-95dbf7dbe9a2
else
search --no-floppy --fs-uuid --set=root f3b4b546-7543-4610-a448-95dbf7dbe9a2
fi
echo 'Chargement de Linux 4.10.0-28-generic…'
linux /boot/vmlinuz-4.10.0-28-generic.efi.signed root=UUID=f3b4b546-7543-4610-a448-95dbf7dbe9a2 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-4.10.0-28-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=f3b4b546-7543-4610-a448-95dbf7dbe9a2 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=0EBB-59BE /boot/efi vfat umask=0077 0 1
# swap was on /dev/sda3 during installation
UUID=6176ac90-b44f-4afc-9ac9-74f2db2a8698 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
48.631511688 = 52.217688064 boot/grub/grub.cfg 1
1.742240906 = 1.870716928 boot/vmlinuz-4.10.0-28-generic 1
48.640632629 = 52.227481600 boot/vmlinuz-4.10.0-28-generic.efi.signed 1
1.742240906 = 1.870716928 vmlinuz 1
324.938369751 = 348.899917824 boot/initrd.img-4.10.0-28-generic 1
324.938369751 = 348.899917824 initrd.img 1
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash ---
initrd /casper/initrd.lz
}
menuentry "OEM install (for manufacturers)" {
set gfxpayload=keep
linux /casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash oem-config/enable=true ---
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz.efi boot=casper integrity-check quiet splash ---
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
# search path for the c32 support libraries (libcom32, libutil etc.)
path
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
ui gfxboot bootlogo
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? syslinux/syslinux.cfg 1
?? = ?? ldlinux.sys 1
?? = ?? ldlinux.c32 1
?? = ?? syslinux/chain.c32 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/ldlinux.c32 1
?? = ?? syslinux/libcom32.c32 1
?? = ?? syslinux/libutil.c32 1
?? = ?? syslinux/vesamenu.c32 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
ldlinux.c32 : not a COM32/COM32R module
syslinux/chain.c32 : not a COM32/COM32R module
syslinux/gfxboot.c32 : not a COM32/COM32R module
syslinux/ldlinux.c32 : not a COM32/COM32R module
syslinux/libcom32.c32 : not a COM32/COM32R module
syslinux/libutil.c32 : not a COM32/COM32R module
syslinux/vesamenu.c32 : not a COM32/COM32R module
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda1
00000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................|
*
00000200
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/5729/mounts) leaked on lvs invocation. Parent PID 13303: bash
File descriptor 63 (pipe:[49289]) leaked on lvs invocation. Parent PID 13303: bash
ADDITIONAL INFORMATION :
=================== log of boot-repair 20171114_1831 ===================
boot-repair version : 4ppa64
boot-sav version : 4ppa64
boot-sav-extra version : 4ppa64
glade2script version : 3.2.3~ppa4
boot-repair is executed in live-session (Ubuntu 16.04.3 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/casper/vmlinuz.efi file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash ---
ls: cannot access '/home/usr/.config': No such file or directory
NTFS signature is missing.
Failed to mount '/dev/sda1': Invalid argument
The device '/dev/sda1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount /dev/sda1 : Error code 12
mount -r /dev/sda1 /mnt/boot-sav/sda1
NTFS signature is missing.
Failed to mount '/dev/sda1': Invalid argument
The device '/dev/sda1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount -r /dev/sda1 : Error code 12
=================== os-prober:
/dev/sda2:Ubuntu 16.04.3 LTS (16.04):Ubuntu:linux
=================== blkid:
/dev/sda2: UUID="f3b4b546-7543-4610-a448-95dbf7dbe9a2" TYPE="ext4" PARTUUID="ec696bec-cbaa-4f0f-89f8-33478311d285"
/dev/sdb1: LABEL="MYLINUXLIVE" UUID="B811-320B" TYPE="vfat" PARTUUID="80d268fe-01"
/dev/loop0: TYPE="squashfs"
/dev/sda3: UUID="6176ac90-b44f-4afc-9ac9-74f2db2a8698" TYPE="swap" PARTUUID="780d5650-d351-46c0-9889-6cbf51958994"
/dev/sda1: PARTLABEL="EFI System Partition" PARTUUID="e335165c-69eb-4052-8ecd-82af467891b5"
1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.
NTFS signature is missing.
Failed to mount '/dev/sda1': Invalid argument
The device '/dev/sda1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount /dev/sda1 : Error code 12
mount -r /dev/sda1 /mnt/boot-sav/sda1
NTFS signature is missing.
Failed to mount '/dev/sda1': Invalid argument
The device '/dev/sda1' doesn't seem to have a valid NTFS.
Maybe the wrong device is used? Or the whole disk instead of a
partition (e.g. /dev/sda, not /dev/sda1)? Or the other way around?
mount -r /dev/sda1 : Error code 12
=================== sda2/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 Aug 1 11:28 grub.d
total 80
-rwxr-xr-x 1 root root 9791 Jun 21 04:11 00_header
-rwxr-xr-x 1 root root 6258 Mar 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 Jun 21 04:11 10_linux
-rwxr-xr-x 1 root root 11082 Jun 21 04:11 20_linux_xen
-rwxr-xr-x 1 root root 1992 Jan 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 Jun 21 04:11 30_os-prober
-rwxr-xr-x 1 root root 1418 Jun 21 04:11 30_uefi-firmware
-rwxr-xr-x 1 root root 214 Jun 21 04:11 40_custom
-rwxr-xr-x 1 root root 216 Jun 21 04:11 41_custom
-rw-r--r-- 1 root root 483 Jun 21 04:11 README
=================== sda2/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sda2: UUID=0EBB-59BE ()
=================== efibootmgr -v
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 2001,2002,2004
Boot0001* USB Hard Drive (UEFI) - USB DISK 3.0 (USB DISK 3.0) PciRoot(0x0)/Pci(0x10,0x0)/USB(5,0)/HD(1,MBR,0x4294967294,0x800,0xebf800)RC
Boot2001* EFI USB Device RC
Boot2002* EFI DVD/CDROM RC
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this live-session.
SecureBoot enabled.
=================== PARTITIONS & DISKS:
sda2 : sda, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-bad-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sda2.
sda1 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sda1.
sda : GPT, no-BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA ST1000LM024 HN-M:;
1:1049kB:538MB:537MB::EFI System Partition:boot, esp;
2:538MB:996GB:995GB:ext4::;
3:996GB:1000GB:4175MB:linux-swap(v1)::;
BYT;
/dev/sdb:7919MB:scsi:512:512:msdos: USB DISK 3.0:;
1:1049kB:7919MB:7918MB:fat32::boot, lba;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sdb disk 7.4G
sdb1 part vfat 7.4G MYLINUXLIVE
sr0 rom 1024M
loop0 loop squashfs 1.4G
sda disk 931.5G
sda2 part ext4 927.1G
sda3 part swap 3.9G
sda1 part 512M
KNAME ROTA RO RM STATE MOUNTPOINT
sdb 1 0 1 running
sdb1 1 0 1 /cdrom
sr0 1 0 1 running
loop0 1 1 0 /rofs
sda 1 0 0 running
sda2 1 0 0 /mnt/boot-sav/sda2
sda3 1 0 0 [SWAP]
sda1 1 0 0
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1947836k,nr_inodes=486959,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=399372k,mode=755)
/dev/sdb1 on /cdrom type vfat (ro,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 on /rofs type squashfs (ro,noatime)
aufs on / type aufs (rw,noatime,si=2c43cab444aa89ed)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=25,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=14186)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=399372k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
/dev/sda2 on /mnt/boot-sav/sda2 type ext4 (rw,relatime,data=ordered)
=================== ls:
/sys/block/sda (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 sda3 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset badblocks bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 drm_dp_aux1 dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 initctl input kfd kmsg lightnvm log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sdb sdb1 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb userio v4l vfio vga_arbiter vhci vhost-net video0 zero
ls /dev/mapper: control
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 1.9G 0 1.9G 0% /dev
tmpfs tmpfs 391M 6.3M 384M 2% /run
/dev/sdb1 vfat 7.4G 2.8G 4.7G 37% /cdrom
/dev/loop0 squashfs 1.5G 1.5G 0 100% /rofs
aufs aufs 2.0G 79M 1.9G 5% /
tmpfs tmpfs 2.0G 236K 2.0G 1% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup
tmpfs tmpfs 2.0G 340K 2.0G 1% /tmp
tmpfs tmpfs 391M 88K 390M 1% /run/user/999
/dev/sda2 ext4 913G 3.7G 863G 1% /mnt/boot-sav/sda2
=================== fdisk -l:
Disk /dev/loop0: 1.4 GiB, 1532116992 bytes, 2992416 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 7387D1E2-F1C7-48C0-9ED1-3F7D35FDF49C
Device Start End Sectors Size Type
/dev/sda1 2048 1050623 1048576 512M EFI System
/dev/sda2 1050624 1945368575 1944317952 927.1G Linux filesystem
/dev/sda3 1945368576 1953523711 8155136 3.9G Linux swap
Disk /dev/sdb: 7.4 GiB, 7918845952 bytes, 15466496 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x80d268fe
Device Boot Start End Sectors Size Id Type
/dev/sdb1 * 2048 15466495 15464448 7.4G c W95 FAT32 (LBA)
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options: sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s use-standard-efi-file
=================== Final advice in case of suggested repair
Please do not forget to make your BIOS boot on sda1/efi/.../grub*.efi file!
=================== User settings
The settings chosen by the user will not act on the boot.
En l'état, ton Ubuntu installé sur le disque dur ne peut pas démarrer parce que la partition EFI (sda1) a son système de fichiers qui est cassé (on voit "unknown filesystem type" dans le Boot-Info). Pour qu'on puisse te donner les bons conseils, ce serait utile que tu donnes le nom commercial complet (*) du modèle de ton ordi et son fabricant.
(*) le nom commercial complet - du genre "UX31A-R4003P" et pas seulement "UX31A" - afin de bien identifier le modèle précisément (et non pas une famille de modèles)
Dernière modification par malbo (Le 15/11/2017, à 10:02)
Hors ligne
#13 Le 15/11/2017, à 13:37
- yaniselmalki
Re : L'installation d'ubuntu ne se complète pas
Dessus, il est marqué RTL8723DE, ou c'est peut être 15-bw035nf? Sinon je ne sais pas ou le trouver.
Hors ligne
#14 Le 15/11/2017, à 13:42
- xubu1957
Re : L'installation d'ubuntu ne se complète pas
Bonjour,
RTL8723DE
Pilote wifi, pas encore pris en charge sur Linux > forum.ubuntu-fr.org/viewtopic.php?pid=21820417#p21820417
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#15 Le 15/11/2017, à 13:52
- yaniselmalki
Re : L'installation d'ubuntu ne se complète pas
Bonjour, est-ce que tu sais si une autre variante de Linux fonctionne?
Hors ligne
#16 Le 15/11/2017, à 14:14
- xubu1957
Re : L'installation d'ubuntu ne se complète pas
Pour le wifi, il faudra rajouter une clé wifi.
Aujourd'hui, j'ai acheté un TP-Link TL-WN722N v2.0
Cela fonctionne, mais seulement sur Ubuntu (aussi kubuntu, lubuntu, etc), mais pas même sur ses dérivés, comme Elementary
> github.com/lwfinger/rtlwifi_new/issues/270
Do not count on module parameter help. Making such a parameter for the RTL8723BE has led to considerable grief for me due to inconsiderate, demanding users. For that reason, I have decided never to do that again. The users will need to complain to their vendors. Perhaps, HP will either decide to spend a few pennies more to put two antennas in their laptop, or finally figure out how to encode the EFUSE in the device to match the connector they are using for their single antenna.
As long as Windows and Linux both have weak signal, take off the bottom of the laptop and move the antenna connector to the other post. That should improve the signal.
Ne comptez pas sur l'aide des paramètres du module. Faire un tel paramètre pour le RTL8723BE m' a causé beaucoup de désagrément à cause d'utilisateurs inconsidérés et exigeants. C'est pour cette raison que j'ai décidé de ne plus jamais recommencer. Les utilisateurs devront se plaindre auprès de leurs fournisseurs. Peut-être, HP décidera soit de dépenser quelques centimes de plus pour mettre deux antennes dans leur ordinateur portable, soit de trouver comment encoder l'EFUSE dans le périphérique pour correspondre au connecteur qu'ils utilisent pour leur antenne unique.
Tant que Windows et Linux ont tous les deux un signal faible, enlevez le bas de l'ordinateur portable et déplacez le connecteur d'antenne vers l'autre poste. Ça devrait améliorer le signal.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#17 Le 15/11/2017, à 14:50
- yaniselmalki
Re : L'installation d'ubuntu ne se complète pas
J'ai windows sur clé USB avec Ubuntu sur la même clé, comment je l'installe?
Hors ligne
#18 Le 15/11/2017, à 14:57
- xubu1957
Re : L'installation d'ubuntu ne se complète pas
Je n'ai donné que des informations pour suppléer l'absence du wifi.
Pour l'installation, c'est cet ordi > Portable-HP-15-bw035nf ?
Si c'est ce modèle PC Portable HP 15-bw035nf 15.6" carte réseau realtek, tu as cette longue discussion pour le wifi > wifi realtek non detecté sur nouveau pc portable HP.
Dernière modification par xubu1957 (Le 15/11/2017, à 15:10)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#19 Le 15/11/2017, à 18:56
- yaniselmalki
Re : L'installation d'ubuntu ne se complète pas
Le lien ne fonctionne pas.
Hors ligne
#20 Le 15/11/2017, à 19:02
- xubu1957
Re : L'installation d'ubuntu ne se complète pas
Je n'ai pas d'anomalie.
Et celui ci > .hp.com/fr/fr/products/laptops/product- ?
fiche technique > .hp.com/v2/GetDocument
Dernière modification par xubu1957 (Le 15/11/2017, à 19:05)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#21 Le 15/11/2017, à 19:05
- yaniselmalki
Re : L'installation d'ubuntu ne se complète pas
Ah non, le lien vers le forum.
Hors ligne
#22 Le 15/11/2017, à 19:08
- xubu1957
Re : L'installation d'ubuntu ne se complète pas
Le lien > https://forum.ubuntu-fr.org/viewtopic.php?id=2015023 pour la discussion wifi realtek non detecté sur nouveau pc portable HP ?
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#23 Le 15/11/2017, à 19:16
- yaniselmalki
Re : L'installation d'ubuntu ne se complète pas
Oui merci, mais du coup je ne comprends pas ce que je dois faire.
Hors ligne
#24 Le 15/11/2017, à 19:25
- xubu1957
Re : L'installation d'ubuntu ne se complète pas
Je suis intervenu dans cette discussion pour signaler l’impossibilité actuelle d'utiliser la carte wifi RTL8723DE.
Pour l'installation du système Ubuntu sur cet ordinateur HP, je ne suis pas compétent.
Il faut attendre des réponses d'autres membres du forum.
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#25 Le 15/11/2017, à 19:32
- yaniselmalki
Re : L'installation d'ubuntu ne se complète pas
Et je fais comment si je veut réinstaller Windows en attendant que la mise à jour sorte?
Hors ligne