Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 03/12/2017, à 20:35

Gasket09

[Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Bonjour,
Après mon installation en liveUSB de la version 16.04LTS, des mises à jour et installation de Flash player (et plus), mon PC fige. Je dois forcer le redémarrage et je tombe sur un écran avec (initramfs) ou grub>. J'ai déjà refais quelque fois la ré-installation mais rien n'y fait, je retombe dans le noir. C'est comme si Grub plantait et que je tombe en mode "manuel". J'ai pas tant de connaissance informatique pour des détails plus précis.

Voici le Boot-info:
http://paste.ubuntu.com/26107027/

Ah oui, c'est le PC neuf de ma fille et elle m'en veux beaucoup d'avoir tué windows...! Hihi!

Dernière modification par Gasket09 (Le 06/12/2017, à 00:32)

Hors ligne

#2 Le 03/12/2017, à 21:09

??

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Bonsoir.
il semble que la partition contenant ubuntu ne soit plus reconnue,
Dans un premier temps, peux-tu donner l'état du disque avant d'envisager les réparations possibles.
Paragraphes  1.2 et 3.1 de https://doc.ubuntu-fr.org/smartmontools

Dernière modification par ?? (Le 03/12/2017, à 21:11)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#3 Le 03/12/2017, à 21:53

Gasket09

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Voila:

smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-28-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, [url=http://www.smartmontools.org]www.smartmontools.org[/url]

=== START OF INFORMATION SECTION ===
Device Model:     ST1000LM035-1RK172
Serial Number:    WDEJSZ4H
LU WWN Device Id: 5 000c50 0ab24e48f
Firmware Version: ACM1
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun Dec  3 20:50:43 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x71) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 171) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x3035)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   083   064   006    Pre-fail  Always       -       212777361
  3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       550
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   066   060   045    Pre-fail  Always       -       4191948
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       46 (7 143 0)
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       197
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   065   063   040    Old_age   Always       -       35 (Min/Max 26/35)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       6
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       14
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       742
194 Temperature_Celsius     0x0022   035   040   000    Old_age   Always       -       35 (0 16 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       44 (226 23 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       536628123
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       408571294
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Modération : merci d'utiliser les balises code (explications ici).

Dernière modification par cqfd93 (Le 03/12/2017, à 22:06)

Hors ligne

#4 Le 03/12/2017, à 21:58

Gasket09

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Plutôt cela, sur le sda2:

smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.10.0-28-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, [url=http://www.smartmontools.org]www.smartmontools.org[/url]

=== START OF INFORMATION SECTION ===
Device Model:     ST1000LM035-1RK172
Serial Number:    WDEJSZ4H
LU WWN Device Id: 5 000c50 0ab24e48f
Firmware Version: ACM1
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-3 T13/2161-D revision 3b
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Sun Dec  3 20:56:52 2017 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x71) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 171) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x3035)	SCT Status supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   083   064   006    Pre-fail  Always       -       212777361
  3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       550
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   066   060   045    Pre-fail  Always       -       4191948
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       46 (172 223 0)
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       197
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   065   063   040    Old_age   Always       -       35 (Min/Max 26/35)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       6
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       14
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       742
194 Temperature_Celsius     0x0022   035   040   000    Old_age   Always       -       35 (0 16 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       44 (135 102 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       536628123
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       408571294
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Modération : merci d'utiliser les balises code (explications ici).

Dernière modification par cqfd93 (Le 03/12/2017, à 22:07)

Hors ligne

#5 Le 03/12/2017, à 22:08

??

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Le disque me semble ne pas être responsable de la perte de la partition

Toujours en live-Usb, contrôles la qualité de la partition

sudo fsck  -v /dev/sda2

Si cela ne veut pas mettre en route, tu utiliseras testdisk jusqu'au paragraphe 5.4 dont tu donneras le retour. https://doc.ubuntu-fr.org/testdisk

Nota, Ce disque seagate ne me semble pas d'une excellante qualité.

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   083   064   006    Pre-fail  Always       -       212777361
  7 Seek_Error_Rate         0x000f   066   060   045    Pre-fail  Always       -       4191948
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       46 (172 223 0)

Dernière modification par ?? (Le 03/12/2017, à 22:20)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#6 Le 03/12/2017, à 22:21

Gasket09

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Retour de:

sudo fsck  -v /dev/sda2
*** journal has been re-created - filesystem is now ext3 again ***
yyyyy
/dev/sda2: ***** FILE SYSTEM WAS MODIFIED *****

      228266 inodes used (0.38%, out of 60530688)
          88 non-contiguous files (0.0%)
         288 non-contiguous directories (0.1%)
             # of inodes with ind/dind/tind blocks: 0/0/0
             Extent depth histogram: 180898/18
     5087627 blocks used (2.10%, out of 242104064)
           0 bad blocks
           1 large file

      140058 regular files
       23777 directories
          55 character device files
          25 block device files
           0 fifos
          21 links
       64339 symbolic links (47258 fast symbolic links)
           3 sockets
------------
      228278 files

j' essai un re-démarrage...

Hors ligne

#7 Le 03/12/2017, à 22:23

??

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

J'ai noté

*** journal has been re-created - filesystem is now ext3 again ***

Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#8 Le 03/12/2017, à 22:34

Gasket09

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

J'ai quand même fait le test du disque. Voici le retour:

TestDisk 7.0, Data Recovery Utility, April 2015
Christophe GRENIER <grenier@cgsecurity.org>
http://www.cgsecurity.org

Disk /dev/sda - 1000 GB / 931 GiB - CHS 121601 255 63
Current partition structure:
     Partition                  Start        End    Size in sectors

 1 P EFI GPT                  0   0  2 121601  80 63 1953525167

Bad relative sector.
No partition is bootable









*=Primary bootable  P=Primary  L=Logical  E=Extended  D=Deleted
>[Quick Search]  [ Backup ]
                            Try to locate partition

Hors ligne

#9 Le 03/12/2017, à 22:37

Gasket09

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Ah oui, le PC s'est mis en marche normalement aussi..

Hors ligne

#10 Le 03/12/2017, à 23:10

Gasket09

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

...au bout de quelques minutes, ça regèle...et écran noir avec ce qui suis:

Busybox v1.22.1 (Ubuntu 1:1.22.0-15ubuntu1) built-in shell (ash)
Enter 'help' for a list of built-in commands.

(initramfs)

Hors ligne

#11 Le 03/12/2017, à 23:18

??

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Qu'appelles-tu regèle?

si c'est toi-même qui appuie sur le bouton d'arrêt, c'est logique qu'il faille faire un fsck

Quelles sont les lignes qui précèdent "busy box"?
Refais le fsck.

et donnes le retour des commandes

 sudo blkid
 sudo fdisk -l

Dernière modification par ?? (Le 03/12/2017, à 23:23)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#12 Le 03/12/2017, à 23:31

Gasket09

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Après reboot, Grub ce lance et me donnes les option Ubuntu et plus. Je lance Ubuntu et je copie les lignes précédente Busybox:

[ 0.017740] [Firmware Bug]: cpu 0, invalid threshold interrupt offset 1 for bank 4, block 0 (MSR00000413=0xd000000001000000)
[ 0.338554] platform wdat_wdt: failed to claim ressource 1
[ 0.338561] ACPI: watchdog: Device creation failed: -16
/dev/sda2 contains a file system with errors, check forced.
Inodes that were part of a corrupted orphan linked list found.

/dev/sda2: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
        (i.e., without -a or -p options)
fsck exited with status code 4
The root filesystem on /dev/sda2 requires a manual fsck

Hors ligne

#13 Le 03/12/2017, à 23:56

??

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Si tu arrêtes sauvagement l'ordinateur, c'est normal qu'au démarrage, tu aies ce message

/dev/sda2: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.

ce qui t'oblige á frapper la commande

 sudo fsck /dev/sda2

que tu peux faire immèdiatement en réponse à ce nessage te le demandant.


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#14 Le 04/12/2017, à 00:32

Gasket09

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Bon, me revoilà
Après

sudo blkid
/dev/sda1: UUID="C6FB-C3AF" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="8c963f6b-e351-4bf7-95f4-90e4b912cf60"
/dev/sda2: UUID="19f779f7-382a-4cb2-8730-4864cbd7b9c2" TYPE="ext4" PARTUUID="e99651f3-b639-490c-a076-08a4735d52be"
/dev/sdb1: UUID="E92D-29BD" TYPE="vfat" PARTUUID="0009825f-01"
/dev/loop0: TYPE="squashfs"
/dev/sda3: UUID="07600c87-3592-4b57-8bb5-c7350a181a9b" TYPE="swap" PARTUUID="2369504c-3722-493f-9374-f59aaaf3580f"

Après

sudo fdisk -l
Disk /dev/loop0: 1.4 GiB, 1532116992 bytes, 2992416 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 73343C1E-6A13-419E-8342-6465B35674B9

Device          Start        End    Sectors   Size Type
/dev/sda1        2048    1050623    1048576   512M EFI System
/dev/sda2     1050624 1937883135 1936832512 923.6G Linux filesystem
/dev/sda3  1937883136 1953523711   15640576   7.5G Linux swap


Disk /dev/sdb: 1.9 GiB, 2056257536 bytes, 4016128 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0009825f

Device     Boot Start     End Sectors  Size Id Type
/dev/sdb1  *       62 4015615 4015554  1.9G  c W95 FAT32 (LBA)

Par regel, je veux dire que le PC fige, plus aucune commande ni la souris ne fonctionne. Alors un redémarrage sauvage s`impose.

Hors ligne

#15 Le 04/12/2017, à 00:34

Gasket09

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Si je dois refaire un

 sudo fsck /dev/sda2

a tous le 10 minutes, le PC a un problème...

Hors ligne

#16 Le 04/12/2017, à 00:36

Gasket09

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Peut-on dire que ce PC serait trop récent pour Linux?

Hors ligne

#17 Le 04/12/2017, à 00:39

??

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Ce que je te propose, c'est de regarder un peu les traces, au prochain blocage, tu bootes en live usb, tu installes boot-info et tu donnes le retour de la commande
boot-info  -t  200
mais je ne sais pas si les traces "parleront".

J'ai noté les caractéristiques de ton micro. https://www.acer.com/ac/fr/CA/content/m … .GNVAA.011

Dernière modification par ?? (Le 04/12/2017, à 12:27)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#18 Le 04/12/2017, à 09:44

malbo

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Bonjour,
Ton modèle d'ordi A315-21-656G est équipé d'un processeur AMD A6-9220. On a pu mettre en évidence - dans ce fil récent concernant un modèle équipé de ce même processeur - que le noyau 4.13 devrait permettre de résoudre le problème de plantage. Pour aller plus vite à la solution, je te suggère de faire une installation toute neuve de Ubuntu 17.10 (qui vient avec le noyau 4.13). Je te suggère de sélectionner "Effacer le disque et installer Ubuntu" à l'étape "Type d'installation" mais de ne pas cocher pas la case "Chiffrer la nouvelle installation de Ubuntu pour la sécurité" et de ne pas cocher la case "Utiliser LVM pour la nouvelle installation de Ubuntu".

Dernière modification par malbo (Le 04/12/2017, à 10:10)

Hors ligne

#19 Le 04/12/2017, à 12:25

??

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Bonjour Malbo.
Merci pour ton diagnostic.
Il n'y plus qu'à....


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#20 Le 05/12/2017, à 02:38

Gasket09

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Alors, la version 17.10 est installé et opérationnel. En voulant faire un boot info, il me renvoie qu'il y a un problème de protocole:

No protocol specified
Unable to init server: Could not connect: Connection refused
No protocol specified
Unable to init server: Impossible de se connecter : Connection refused
/usr/share/boot-sav/bs-cmd.sh : ligne 17 :  3973 Erreur de segmentation  (core dumped) $G2S $1 -g /usr/share/boot-sav/boot-sav.glade -s /usr/share/boot-sav/$APPNAME.sh --combobox="@@_combobox_format_partition@@col" --combobox="@@_combobox_bootflag@@col" --combobox="@@_combobox_ostoboot_bydefault@@col" --combobox="@@_combobox_purge_grub@@col" --combobox="@@_combobox_separateboot@@col" --combobox="@@_combobox_efi@@col" --combobox="@@_combobox_sepusr@@col" --combobox="@@_combobox_place_grub@@col" --combobox="@@_combobox_add_kernel_option@@col" --combobox="@@_combobox_restore_mbrof@@col" --combobox="@@_combobox_partition_booted_bymbr@@col"
No protocol specified
xhost:  unable to open display ":0"

Une idée de ce que c'est?

Hors ligne

#21 Le 05/12/2017, à 02:44

Gasket09

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Après un peu de recherche, voilà:

http://paste.ubuntu.com/26115740/

Hors ligne

#22 Le 05/12/2017, à 07:25

malbo

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Bonjour,
Ton Boot-Info est là :

 Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/ubuntu/grub.cfg /EFI/BOOT/fbx64.efi 
                       /EFI/ubuntu/fwupx64.efi /EFI/ubuntu/grubx64.efi 
                       /EFI/ubuntu/mmx64.efi /EFI/ubuntu/shimx64.efi

sda2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 17.10
    Boot files:        /boot/grub/grub.cfg /etc/fstab

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 1,953,525,167 1,953,525,167  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sda1                 2,048     1,050,623     1,048,576 EFI System partition
/dev/sda2             1,050,624 1,953,523,711 1,952,473,088 Data partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        C6FB-C3AF                              vfat       
/dev/sda2        0c2ebda6-5e5a-45f5-9b8b-5e14a966c383   ext4       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Dec  4 20:42 ata-ST1000LM035-1RK172_WDEJSZ4H -> ../../sda
lrwxrwxrwx 1 root root 10 Dec  4 20:42 ata-ST1000LM035-1RK172_WDEJSZ4H-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec  4 20:42 ata-ST1000LM035-1RK172_WDEJSZ4H-part2 -> ../../sda2
lrwxrwxrwx 1 root root  9 Dec  4 20:42 wwn-0x5000c500ab24e48f -> ../../sda
lrwxrwxrwx 1 root root 10 Dec  4 20:42 wwn-0x5000c500ab24e48f-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Dec  4 20:42 wwn-0x5000c500ab24e48f-part2 -> ../../sda2

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /boot/efi                vfat       (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda2        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)


========================== sda1/EFI/ubuntu/grub.cfg: ===========================

--------------------------------------------------------------------------------
search.fs_uuid 0c2ebda6-5e5a-45f5-9b8b-5e14a966c383 root hd0,gpt2 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------

=========================== sda2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  0c2ebda6-5e5a-45f5-9b8b-5e14a966c383
else
  search --no-floppy --fs-uuid --set=root 0c2ebda6-5e5a-45f5-9b8b-5e14a966c383
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_CA
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=0
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 0 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=7
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-0c2ebda6-5e5a-45f5-9b8b-5e14a966c383' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  0c2ebda6-5e5a-45f5-9b8b-5e14a966c383
	else
	  search --no-floppy --fs-uuid --set=root 0c2ebda6-5e5a-45f5-9b8b-5e14a966c383
	fi
	linux	/boot/vmlinuz-4.13.0-17-generic.efi.signed root=UUID=0c2ebda6-5e5a-45f5-9b8b-5e14a966c383 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.13.0-17-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-0c2ebda6-5e5a-45f5-9b8b-5e14a966c383' {
	menuentry 'Ubuntu, avec Linux 4.13.0-17-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-17-generic-advanced-0c2ebda6-5e5a-45f5-9b8b-5e14a966c383' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  0c2ebda6-5e5a-45f5-9b8b-5e14a966c383
		else
		  search --no-floppy --fs-uuid --set=root 0c2ebda6-5e5a-45f5-9b8b-5e14a966c383
		fi
		echo	'Chargement de Linux 4.13.0-17-generic…'
		linux	/boot/vmlinuz-4.13.0-17-generic.efi.signed root=UUID=0c2ebda6-5e5a-45f5-9b8b-5e14a966c383 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.13.0-17-generic
	}
	menuentry 'Ubuntu, with Linux 4.13.0-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-17-generic-recovery-0c2ebda6-5e5a-45f5-9b8b-5e14a966c383' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  0c2ebda6-5e5a-45f5-9b8b-5e14a966c383
		else
		  search --no-floppy --fs-uuid --set=root 0c2ebda6-5e5a-45f5-9b8b-5e14a966c383
		fi
		echo	'Chargement de Linux 4.13.0-17-generic…'
		linux	/boot/vmlinuz-4.13.0-17-generic.efi.signed root=UUID=0c2ebda6-5e5a-45f5-9b8b-5e14a966c383 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.13.0-17-generic
	}
	menuentry 'Ubuntu, avec Linux 4.13.0-16-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-16-generic-advanced-0c2ebda6-5e5a-45f5-9b8b-5e14a966c383' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  0c2ebda6-5e5a-45f5-9b8b-5e14a966c383
		else
		  search --no-floppy --fs-uuid --set=root 0c2ebda6-5e5a-45f5-9b8b-5e14a966c383
		fi
		echo	'Chargement de Linux 4.13.0-16-generic…'
	        linux	/boot/vmlinuz-4.13.0-16-generic root=UUID=0c2ebda6-5e5a-45f5-9b8b-5e14a966c383 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.13.0-16-generic
	}
	menuentry 'Ubuntu, with Linux 4.13.0-16-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-16-generic-recovery-0c2ebda6-5e5a-45f5-9b8b-5e14a966c383' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt2'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  0c2ebda6-5e5a-45f5-9b8b-5e14a966c383
		else
		  search --no-floppy --fs-uuid --set=root 0c2ebda6-5e5a-45f5-9b8b-5e14a966c383
		fi
		echo	'Chargement de Linux 4.13.0-16-generic…'
	        linux	/boot/vmlinuz-4.13.0-16-generic root=UUID=0c2ebda6-5e5a-45f5-9b8b-5e14a966c383 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.13.0-16-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=0c2ebda6-5e5a-45f5-9b8b-5e14a966c383 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=C6FB-C3AF  /boot/efi       vfat    umask=0077      0       1
/swapfile                                 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

   4.901374817 = 5.262811136    boot/grub/grub.cfg                             2
   3.894969940 = 4.182192128    boot/vmlinuz-4.13.0-16-generic                 1
   5.242630005 = 5.629231104    boot/vmlinuz-4.13.0-17-generic                 1
   5.473098755 = 5.876695040    boot/vmlinuz-4.13.0-17-generic.efi.signed      2
   3.894969940 = 4.182192128    vmlinuz                                        1
   5.658794403 = 6.076084224    boot/initrd.img-4.13.0-16-generic              2
   6.227535248 = 6.686765056    boot/initrd.img-4.13.0-17-generic              2
   5.658794403 = 6.076084224    initrd.img                                     2
   5.658794403 = 6.076084224    initrd.img.old                                 2


ADDITIONAL INFORMATION :
=================== log of boot-info 20171204_2042 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 17.10, artful, Ubuntu, x86_64)
CPU op-mode(s):      32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.13.0-17-generic.efi.signed root=UUID=0c2ebda6-5e5a-45f5-9b8b-5e14a966c383 ro quiet splash vt.handoff=7

=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 17.10 CurrentSession:linux

=================== blkid:
/dev/sda1: UUID="C6FB-C3AF" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="cf2572b5-52f8-4af2-a8ee-ed61daddf584"
/dev/sda2: UUID="0c2ebda6-5e5a-45f5-9b8b-5e14a966c383" TYPE="ext4" PARTUUID="af7fdcd1-958c-49f6-be73-7518e1f155e6"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root    4096 oct 18 14:36 grub.d
total 80
-rwxr-xr-x 1 root root  9783 oct 12 09:41 00_header
-rwxr-xr-x 1 root root  6258 avr 24  2017 05_debian_theme
-rwxr-xr-x 1 root root 12676 oct 12 09:41 10_linux
-rwxr-xr-x 1 root root 11281 oct 12 09:41 20_linux_xen
-rwxr-xr-x 1 root root  1992 jan 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 oct 12 09:41 30_os-prober
-rwxr-xr-x 1 root root  1418 oct 12 09:41 30_uefi-firmware
-rwxr-xr-x 1 root root   214 oct 12 09:41 40_custom
-rwxr-xr-x 1 root root   216 oct 12 09:41 41_custom
-rw-r--r-- 1 root root   483 oct 12 09:41 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda2: UUID=C6FB-C3AF   (sda1)
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/fbx64.efi

=================== efibootmgr -v
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 0001,2001,2002,2003
Boot0001* ubuntu	HD(1,GPT,cf2572b5-52f8-4af2-a8ee-ed61daddf584,0x800,0x100000)/File(EFIubuntushimx64.efi)
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot enabled.


=================== PARTITIONS & DISKS:
sda2	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, .
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /boot/efi.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA ST1000LM035-1RK1:;
1:1049kB:538MB:537MB:fat32:EFI System Partition:boot, esp;
2:538MB:1000GB:1000GB:ext4::;

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sda   disk        931,5G
sda1  part vfat     512M
sda2  part ext4     931G

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /boot/efi
sda2     1  0  0         /


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=3779556k,nr_inodes=944889,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=767800k,mode=755)
/dev/sda2 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=32,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=1461)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
mqueue on /dev/mqueue type mqueue (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/dev/sda1 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
tmpfs on /run/user/121 type tmpfs (rw,nosuid,nodev,relatime,size=767796k,mode=700,uid=121,gid=127)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=767796k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 drm_dp_aux1 ecryptfs fb0 fd full fuse gpiochip0 hidraw0 hidraw1 hidraw2 hpet hugepages hwrng i2c-0 i2c-1 i2c-10 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 initctl input kfd kmsg kvm lightnvm log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sg0 shm snapshot snd stderr stdin stdout uhid uinput urandom usb userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 58 90 6d 6b 66 73 2e  66 61 74 00 02 08 20 00  |.X.mkfs.fat... .|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 10 00 fe 03 00 00  00 00 00 00 02 00 00 00  |................|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 af c3 fb c6 4e  4f 20 4e 41 4d 45 20 20  |..)....NO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 0e 1f be 77 7c ac  |  FAT32   ...w|.|
00000060  22 c0 74 0b 56 b4 0e bb  07 00 cd 10 5e eb f0 32  |".t.V.......^..2|
00000070  e4 cd 16 cd 19 eb fe 54  68 69 73 20 69 73 20 6e  |.......This is n|
00000080  6f 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 64 69  |ot a bootable di|
00000090  73 6b 2e 20 20 50 6c 65  61 73 65 20 69 6e 73 65  |sk.  Please inse|
000000a0  72 74 20 61 20 62 6f 6f  74 61 62 6c 65 20 66 6c  |rt a bootable fl|
000000b0  6f 70 70 79 20 61 6e 64  0d 0a 70 72 65 73 73 20  |oppy and..press |
000000c0  61 6e 79 20 6b 65 79 20  74 6f 20 74 72 79 20 61  |any key to try a|
000000d0  67 61 69 6e 20 2e 2e 2e  20 0d 0a 00 00 00 00 00  |gain ... .......|
000000e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.7G     0  3.7G   0% /dev
tmpfs          tmpfs     750M  9.9M  740M   2% /run
/dev/sda2      ext4      916G  6.3G  863G   1% /
tmpfs          tmpfs     3.7G   24K  3.7G   1% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     3.7G     0  3.7G   0% /sys/fs/cgroup
/dev/sda1      vfat      511M  4.6M  507M   1% /boot/efi
tmpfs          tmpfs     750M   16K  750M   1% /run/user/121
tmpfs          tmpfs     750M  772K  750M   1% /run/user/1000

=================== fdisk -l:
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 4D74940D-77D9-4D5D-96BA-ADF28F358C83

Device       Start        End    Sectors  Size Type
/dev/sda1     2048    1050623    1048576  512M EFI System
/dev/sda2  1050624 1953523711 1952473088  931G Linux filesystem




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda2, using the following options:        sda1/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s    use-standard-efi-file


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda1/efi/.../grub*.efi !


=================== User settings
The settings chosen by the user will not act on the boot.

Le paramétrage du système UEFI est visible dans cet extrait :

=================== efibootmgr -v
BootCurrent: 0001
Timeout: 0 seconds
BootOrder: 0001,2001,2002,2003
Boot0001* ubuntu	HD(1,GPT,cf2572b5-52f8-4af2-a8ee-ed61daddf584,0x800,0x100000)/File(EFIubuntushimx64.efi)
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot enabled.

Les lignes BootCurrent et BootOrder révèlent que le démarrage par défaut de l'ordi se fait sur l'entrée Boot0001 qui est l'entrée "ubuntu" du menu proposé par le système UEFI. C'est trop beau : il n'est pas nécessaire de recourir à la fonctionnalité "Select an UEFI file as trusted for executing" qui semble indispensable pour des modèles plus anciens. Il semble que ?? ait raison dans ce post de l'autre discussion : l'UEFI de ce modèle sait reconnaître tout seul que le fichier shimx64.efi (fichier de démarrage de l'entrée "ubuntu") est un fichier "sûr".

EDIT : je viens d'ajouter ton modèle Aspire A315-21-656G dans la Liste des portables « Acer ». Pour mémoire, ce modèle visible sur cette page est équipé d'un processeur AMD A6-9220 ; la partie graphique "AMD Radeon R4 Graphics" est intégrée sur la même puce que le processeur (il n'y a pas de carte graphique dédiée)

Je te prie de passer la discussion en "résolu" en procédant comme suit :
1) te connecter sur le forum
2) cliquer sur "Modifier" en bas à droite de ton PREMIER post
3) modifier le titre de la discussion pour qu'il devienne :

[Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Dernière modification par malbo (Le 05/12/2017, à 07:45)

Hors ligne

#23 Le 06/12/2017, à 00:32

Gasket09

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Merci à vous deux!!

Hors ligne

#24 Le 13/07/2019, à 10:59

jgaury

Re : [Résolu] Problème d'installation Acer Aspire 3 A315-21-656G

Hors ligne