#1 Le 12/01/2018, à 21:09
- zemog
dysfonctionnement graphique ou logiciel??
bonjour la communauté,
Je m'adresse à tous ceux qui peuvent m'aider dans la résolution de mon problème. j'ai à priori un problème graphique (mais c'est à confirmer). Le pc est démarré et lorsque je place la souris sur le lanceur tout programme ouvert disparaît, bureau compris. j'ai tapé la commande DMESG et je ne comprend pas en quoi cela peut m'aider.
voici ci-dessous le résultat, HELLLLLP
[ 0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28
[ 0.000000] Linux version 4.10.0-42-generic (buildd@lgw01-amd64-007) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5) ) #46~16.04.1-Ubuntu SMP Mon Dec 4 15:57:59 UTC 2017 (Ubuntu 4.10.0-42.46~16.04.1-generic 4.10.17)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-42-generic root=UUID=1defe0d2-c60f-4016-8bf0-3ca56bf6d033 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d8000-0x00000000000dffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b5aa0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b5aa1000-0x00000000b5aa6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b5aa7000-0x00000000b5bbbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b5bbc000-0x00000000b5c0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b5c0f000-0x00000000b5d07fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b5d08000-0x00000000b5f0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b5f0f000-0x00000000b5f17fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b5f18000-0x00000000b5f1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b5f1f000-0x00000000b5f63fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b5f64000-0x00000000b5f9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b5f9f000-0x00000000b5fe3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b5fe4000-0x00000000b5ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b5fff000-0x00000000b5ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: TOSHIBA Satellite Pro C660/PWWAM, BIOS 1.40 04/08/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0FFE00000 mask FFFF80000 write-protect
[ 0.000000] 5 base 0B7E00000 mask FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xb6000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f6c70-0x000f6c7f] mapped at [ffff9015000f6c70]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff901500099000] 99000 size 24576
[ 0.000000] BRK [0x47828000, 0x47828fff] PGTABLE
[ 0.000000] BRK [0x47829000, 0x47829fff] PGTABLE
[ 0.000000] BRK [0x4782a000, 0x4782afff] PGTABLE
[ 0.000000] BRK [0x4782b000, 0x4782bfff] PGTABLE
[ 0.000000] BRK [0x4782c000, 0x4782cfff] PGTABLE
[ 0.000000] BRK [0x4782d000, 0x4782dfff] PGTABLE
[ 0.000000] BRK [0x4782e000, 0x4782efff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x33018000-0x35803fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6BB0 000024 (v02 TOSCPL)
[ 0.000000] ACPI: XSDT 0x00000000B5FF6638 00006C (v01 TOSCPL TOSCPL00 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 0x00000000B5FE6000 0000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 0x00000000B5FE7000 0083D2 (v02 Intel CANTIGA 06040000 INTL 20060608)
[ 0.000000] ACPI: FACS 0x00000000B5F9EFC0 000040
[ 0.000000] ACPI: FACS 0x00000000B5F9EFC0 000040
[ 0.000000] ACPI: HPET 0x00000000B5FFED14 000038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 0x00000000B5FFED4C 00003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: OSFR 0x00000000B5FFED88 000072 (v01 TOSHIB A+2nd ID 06040000 TASM 04010000)
[ 0.000000] ACPI: APIC 0x00000000B5FFEDFA 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 0x00000000B5FFEE62 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 0x00000000B5FFEE8A 000176 (v01 TOSCPL TOSCPL00 06040000 RHOL 00000000)
[ 0.000000] ACPI: SSDT 0x00000000B5FF66DC 0000FE (v01 BrtRef DD01BRT 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT 0x00000000B5FE5000 000655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13ffd2000-0x13fffcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b5aa0fff]
[ 0.000000] node 0: [mem 0x00000000b5aa7000-0x00000000b5bbbfff]
[ 0.000000] node 0: [mem 0x00000000b5c0f000-0x00000000b5d07fff]
[ 0.000000] node 0: [mem 0x00000000b5f0f000-0x00000000b5f17fff]
[ 0.000000] node 0: [mem 0x00000000b5f1f000-0x00000000b5f63fff]
[ 0.000000] node 0: [mem 0x00000000b5f9f000-0x00000000b5fe3fff]
[ 0.000000] node 0: [mem 0x00000000b5fff000-0x00000000b5ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.000000] On node 0 totalpages: 1006817
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11574 pages used for memmap
[ 0.000000] DMA32 zone: 740675 pages, LIFO batch:31
[ 0.000000] Normal zone: 4096 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000b8000000-0x00000000bfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000d7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000d8000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb5aa1000-0xb5aa6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb5bbc000-0xb5c0efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb5d08000-0xb5f0efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb5f18000-0xb5f1efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb5f64000-0xb5f9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb5fe4000-0xb5ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb6000000-0xb7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb8000000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xffffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff90163fc00000 s107992 r8192 d31272 u1048576
[ 0.000000] pcpu-alloc: s107992 r8192 d31272 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 991062
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.0-42-generic root=UUID=1defe0d2-c60f-4016-8bf0-3ca56bf6d033 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3835640K/4027268K available (9070K kernel code, 1667K rwdata, 3828K rodata, 2228K init, 2364K bss, 191628K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[ 0.000000] NR_IRQS:524544 nr_irqs:440 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2094.732 MHz processor
[ 0.004012] Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.46 BogoMIPS (lpj=8378928)
[ 0.004081] pid_max: default: 32768 minimum: 301
[ 0.004144] ACPI: Core revision 20160930
[ 0.004191] TOSHIBA Satellite detected - force copy of DSDT to local memory
[ 0.004341] ACPI: Forced DSDT copy: length 0x083D2 copied locally, original unmapped
[ 0.010812] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.010905] Security Framework initialized
[ 0.010952] Yama: becoming mindful.
[ 0.011018] AppArmor: AppArmor initialized
[ 0.011429] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.013749] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.014929] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.014994] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.015483] CPU: Physical Processor ID: 0
[ 0.015532] CPU: Processor Core ID: 0
[ 0.015579] mce: CPU supports 6 MCE banks
[ 0.015632] CPU0: Thermal monitoring enabled (TM1)
[ 0.015682] process: using mwait in idle threads
[ 0.015733] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.015782] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.016051] Freeing SMP alternatives memory: 32K
[ 0.020015] ftrace: allocating 34227 entries in 134 pages
[ 0.036156] smpboot: Max logical packages: 1
[ 0.036657] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.080000] smpboot: CPU0: Intel Celeron(R) Dual-Core CPU T3500 @ 2.10GHz (family: 0x6, model: 0x17, stepping: 0xa)
[ 0.080000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.080000] ... version: 2
[ 0.080000] ... bit width: 40
[ 0.080000] ... generic registers: 2
[ 0.080000] ... value mask: 000000ffffffffff
[ 0.080000] ... max period: 000000007fffffff
[ 0.080000] ... fixed-purpose events: 3
[ 0.080000] ... event mask: 0000000700000003
[ 0.080000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.080000] smp: Bringing up secondary CPUs ...
[ 0.080000] x86: Booting SMP configuration:
[ 0.080000] .... node #0, CPUs: #1
[ 0.082065] smp: Brought up 1 node, 2 CPUs
[ 0.082065] smpboot: Total of 2 processors activated (8378.92 BogoMIPS)
[ 0.082065] devtmpfs: initialized
[ 0.082065] x86/mm: Memory block size: 128MB
[ 0.085677] evm: security.selinux
[ 0.085723] evm: security.SMACK64
[ 0.085769] evm: security.SMACK64EXEC
[ 0.085815] evm: security.SMACK64TRANSMUTE
[ 0.085861] evm: security.SMACK64MMAP
[ 0.085907] evm: security.ima
[ 0.085952] evm: security.capability
[ 0.088027] PM: Registering ACPI NVS region [mem 0xb5f64000-0xb5f9efff] (241664 bytes)
[ 0.088167] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.089241] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.089341] pinctrl core: initialized pinctrl subsystem
[ 0.089547] RTC time: 20:56:49, date: 01/11/18
[ 0.089719] NET: Registered protocol family 16
[ 0.104005] cpuidle: using governor ladder
[ 0.116003] cpuidle: using governor menu
[ 0.116052] PCCT header not found.
[ 0.116126] Simple Boot Flag at 0x36 set to 0x1
[ 0.116185] ACPI: bus type PCI registered
[ 0.116233] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.116373] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.116456] PCI: not using MMCONFIG
[ 0.116456] PCI: Using configuration type 1 for base access
[ 0.116456] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.116456] mtrr: probably your BIOS does not setup all CPUs.
[ 0.116456] mtrr: corrected configuration.
[ 0.132051] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.132104] ACPI: Added _OSI(Module Device)
[ 0.132152] ACPI: Added _OSI(Processor Device)
[ 0.132199] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.132247] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.136399] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.137156] ACPI: Dynamic OEM Table Load:
[ 0.137212] ACPI: SSDT 0xFFFF90163A9A4000 0005A3 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.137505] ACPI: Dynamic OEM Table Load:
[ 0.137505] ACPI: SSDT 0xFFFF90163A919180 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.137505] ACPI : EC: EC started
[ 0.137505] ACPI : EC: interrupt blocked
[ 0.137505] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.137525] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.137589] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.137652] ACPI: Interpreter enabled
[ 0.137721] ACPI: (supports S0 S3 S4 S5)
[ 0.137769] ACPI: Using IOAPIC for interrupt routing
[ 0.137855] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.140835] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.140917] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.200560] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.200620] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.200689] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.201296] PCI host bridge to bus 0000:00
[ 0.201345] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.201397] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.201448] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.201511] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.201575] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.201637] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[ 0.201701] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[ 0.201765] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.201823] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.201851] DMAR: Forcing write-buffer flush capability
[ 0.201900] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.202054] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.202068] pci 0000:00:02.0: reg 0x10: [mem 0xf2800000-0xf2bfffff 64bit]
[ 0.202076] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.202082] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x1807]
[ 0.202204] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.202215] pci 0000:00:02.1: reg 0x10: [mem 0xf2100000-0xf21fffff 64bit]
[ 0.202386] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.202444] pci 0000:00:1a.0: reg 0x20: [io 0x1820-0x183f]
[ 0.202569] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.202676] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.202735] pci 0000:00:1a.1: reg 0x20: [io 0x1840-0x185f]
[ 0.202861] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.202966] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.203024] pci 0000:00:1a.2: reg 0x20: [io 0x1860-0x187f]
[ 0.203145] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.203259] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.203282] pci 0000:00:1a.7: reg 0x10: [mem 0xf2504000-0xf25043ff]
[ 0.203392] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.203463] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.203572] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.203597] pci 0000:00:1b.0: reg 0x10: [mem 0xf2300000-0xf2303fff 64bit]
[ 0.203709] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.203777] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.203882] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.203994] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.204073] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.204184] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.204296] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.204418] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.204529] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.204657] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.204716] pci 0000:00:1d.0: reg 0x20: [io 0x1880-0x189f]
[ 0.204839] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.204945] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.205003] pci 0000:00:1d.1: reg 0x20: [io 0x18a0-0x18bf]
[ 0.205125] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.205228] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.205287] pci 0000:00:1d.2: reg 0x20: [io 0x18c0-0x18df]
[ 0.205407] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.205521] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.205544] pci 0000:00:1d.7: reg 0x10: [mem 0xf2504400-0xf25047ff]
[ 0.205654] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.205722] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.205827] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.205954] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.206063] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 0.206306] pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018f
[ 0.206327] pci 0000:00:1f.2: reg 0x10: [io 0x18f8-0x18ff]
[ 0.206338] pci 0000:00:1f.2: reg 0x14: [io 0x180c-0x180f]
[ 0.206349] pci 0000:00:1f.2: reg 0x18: [io 0x18f0-0x18f7]
[ 0.206361] pci 0000:00:1f.2: reg 0x1c: [io 0x1808-0x180b]
[ 0.206372] pci 0000:00:1f.2: reg 0x20: [io 0x18e0-0x18ef]
[ 0.206384] pci 0000:00:1f.2: reg 0x24: [io 0x1810-0x181f]
[ 0.206533] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.206556] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
[ 0.206587] pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f]
[ 0.206721] pci 0000:00:1f.5: [8086:292d] type 00 class 0x010185
[ 0.206742] pci 0000:00:1f.5: reg 0x10: [io 0x1c50-0x1c57]
[ 0.206753] pci 0000:00:1f.5: reg 0x14: [io 0x1c44-0x1c47]
[ 0.206765] pci 0000:00:1f.5: reg 0x18: [io 0x1c48-0x1c4f]
[ 0.206776] pci 0000:00:1f.5: reg 0x1c: [io 0x1c40-0x1c43]
[ 0.206788] pci 0000:00:1f.5: reg 0x20: [io 0x1c30-0x1c3f]
[ 0.206799] pci 0000:00:1f.5: reg 0x24: [io 0x1c20-0x1c2f]
[ 0.207034] acpiphp: Slot [1] registered
[ 0.207088] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.207141] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.207145] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.207153] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.207251] pci 0000:0e:00.0: [10ec:8136] type 00 class 0x020000
[ 0.207278] pci 0000:0e:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.207316] pci 0000:0e:00.0: reg 0x18: [mem 0xf2004000-0xf2004fff 64bit pref]
[ 0.207340] pci 0000:0e:00.0: reg 0x20: [mem 0xf2000000-0xf2003fff 64bit pref]
[ 0.207467] pci 0000:0e:00.0: supports D1 D2
[ 0.207469] pci 0000:0e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.207947] pci 0000:0e:00.0: System wakeup disabled by ACPI
[ 0.220025] pci 0000:00:1c.2: PCI bridge to [bus 0e]
[ 0.220077] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.220088] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.220224] pci 0000:14:00.0: [14e4:4727] type 00 class 0x028000
[ 0.220261] pci 0000:14:00.0: reg 0x10: [mem 0xf2200000-0xf2203fff 64bit]
[ 0.220450] pci 0000:14:00.0: supports D1 D2
[ 0.220452] pci 0000:14:00.0: PME# supported from D0 D3hot D3cold
[ 0.220515] pci 0000:14:00.0: System wakeup disabled by ACPI
[ 0.232051] pci 0000:00:1c.3: PCI bridge to [bus 14]
[ 0.232107] pci 0000:00:1c.3: bridge window [mem 0xf2200000-0xf22fffff]
[ 0.232239] pci 0000:00:1e.0: PCI bridge to [bus 26] (subtractive decode)
[ 0.232303] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.232305] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.232307] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.232308] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.232310] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.232312] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
[ 0.232314] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[ 0.260358] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.260487] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.260613] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.260726] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.260849] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.260976] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.261088] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.261212] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.261404] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.261648] ACPI : EC: interrupt unblocked
[ 0.261706] ACPI : EC: event unblocked
[ 0.261760] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.261824] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.262258] SCSI subsystem initialized
[ 0.262324] libata version 3.00 loaded.
[ 0.262324] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.262324] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.262324] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.262324] vgaarb: loaded
[ 0.262324] ACPI: bus type USB registered
[ 0.262324] usbcore: registered new interface driver usbfs
[ 0.262324] usbcore: registered new interface driver hub
[ 0.262324] usbcore: registered new device driver usb
[ 0.262324] PCI: Using ACPI for IRQ routing
[ 0.271609] PCI: pci_cache_line_size set to 64 bytes
[ 0.271722] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.271724] e820: reserve RAM buffer [mem 0xb5aa1000-0xb7ffffff]
[ 0.271726] e820: reserve RAM buffer [mem 0xb5bbc000-0xb7ffffff]
[ 0.271727] e820: reserve RAM buffer [mem 0xb5d08000-0xb7ffffff]
[ 0.271729] e820: reserve RAM buffer [mem 0xb5f18000-0xb7ffffff]
[ 0.271730] e820: reserve RAM buffer [mem 0xb5f64000-0xb7ffffff]
[ 0.271732] e820: reserve RAM buffer [mem 0xb5fe4000-0xb7ffffff]
[ 0.271733] e820: reserve RAM buffer [mem 0xb6000000-0xb7ffffff]
[ 0.271874] NetLabel: Initializing
[ 0.271921] NetLabel: domain hash size = 128
[ 0.271969] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.272024] NetLabel: unlabeled traffic allowed by default
[ 0.272103] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.272128] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.272180] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.276036] clocksource: Switched to clocksource hpet
[ 0.290193] VFS: Disk quotas dquot_6.6.0
[ 0.290277] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.290497] AppArmor: AppArmor Filesystem Enabled
[ 0.290629] pnp: PnP ACPI init
[ 0.316200] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.316257] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.316338] system 00:01: [io 0x0480-0x048f] has been reserved
[ 0.316390] system 00:01: [io 0xffff] has been reserved
[ 0.316439] system 00:01: [io 0xffff] has been reserved
[ 0.316489] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.316539] system 00:01: [io 0x1180-0x11ff] has been reserved
[ 0.316591] system 00:01: [io 0xfe00] has been reserved
[ 0.316641] system 00:01: [io 0xff2c-0xff7f] has been reserved
[ 0.316693] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.316734] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.316770] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.316806] pnp 00:04: Plug and Play ACPI device, IDs TOS0100 SYN0700 SYN0002 PNP0f13 (active)
[ 0.316982] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.317035] system 00:05: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.317087] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.317138] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.317189] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.317241] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.317293] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.317346] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.317498] pnp: PnP ACPI: found 6 devices
[ 0.324933] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.325035] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 0e] add_size 400000 add_align 100000
[ 0.325047] pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 14] add_size 1000
[ 0.325049] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 14] add_size 200000 add_align 100000
[ 0.325067] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 400000 min_align 100000
[ 0.325069] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x004fffff] res_to_dev_res add_size 400000 min_align 100000
[ 0.325071] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.325074] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.325075] pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.325077] pci 0000:00:1c.3: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.325084] pci 0000:00:1c.2: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
[ 0.325141] pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.325207] pci 0000:00:1c.3: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.325261] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0600000-0xc06000ff 64bit]
[ 0.325336] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.325387] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.325442] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.325496] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.325565] pci 0000:00:1c.2: PCI bridge to [bus 0e]
[ 0.325615] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.325670] pci 0000:00:1c.2: bridge window [mem 0xc0000000-0xc03fffff]
[ 0.325725] pci 0000:00:1c.2: bridge window [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.325794] pci 0000:00:1c.3: PCI bridge to [bus 14]
[ 0.325844] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.325899] pci 0000:00:1c.3: bridge window [mem 0xf2200000-0xf22fffff]
[ 0.325953] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.326023] pci 0000:00:1e.0: PCI bridge to [bus 26]
[ 0.326086] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.326088] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.326089] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.326091] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.326093] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000e3fff window]
[ 0.326094] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xdfffffff window]
[ 0.326096] pci_bus 0000:00: resource 10 [mem 0xf0000000-0xfebfffff window]
[ 0.326098] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.326100] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff]
[ 0.326101] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.326103] pci_bus 0000:0e: resource 0 [io 0x3000-0x3fff]
[ 0.326104] pci_bus 0000:0e: resource 1 [mem 0xc0000000-0xc03fffff]
[ 0.326106] pci_bus 0000:0e: resource 2 [mem 0xf2000000-0xf20fffff 64bit pref]
[ 0.326108] pci_bus 0000:14: resource 0 [io 0x4000-0x4fff]
[ 0.326109] pci_bus 0000:14: resource 1 [mem 0xf2200000-0xf22fffff]
[ 0.326111] pci_bus 0000:14: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.326113] pci_bus 0000:26: resource 4 [io 0x0000-0x0cf7 window]
[ 0.326115] pci_bus 0000:26: resource 5 [io 0x0d00-0xffff window]
[ 0.326116] pci_bus 0000:26: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.326118] pci_bus 0000:26: resource 7 [mem 0x000d4000-0x000d7fff window]
[ 0.326120] pci_bus 0000:26: resource 8 [mem 0x000e0000-0x000e3fff window]
[ 0.326121] pci_bus 0000:26: resource 9 [mem 0xc0000000-0xdfffffff window]
[ 0.326123] pci_bus 0000:26: resource 10 [mem 0xf0000000-0xfebfffff window]
[ 0.326245] NET: Registered protocol family 2
[ 0.326564] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.326752] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.326980] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.327099] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.327178] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.327351] NET: Registered protocol family 1
[ 0.327428] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.328887] PCI: CLS 64 bytes, default 64
[ 0.328971] Unpacking initramfs...
[ 1.176710] Freeing initrd memory: 40880K
[ 1.177771] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.177824] software IO TLB [mem 0xb1aa1000-0xb5aa1000] (64MB) mapped at [ffff9015b1aa1000-ffff9015b5aa0fff]
[ 1.178142] Scanning for low memory corruption every 60 seconds
[ 1.178613] audit: initializing netlink subsys (disabled)
[ 1.178756] audit: type=2000 audit(1515704210.176:1): initialized
[ 1.179166] Initialise system trusted keyrings
[ 1.179328] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 1.181742] zbud: loaded
[ 1.182466] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.182827] fuse init (API version 7.26)
[ 1.184581] Key type asymmetric registered
[ 1.184633] Asymmetric key parser 'x509' registered
[ 1.184750] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.184855] io scheduler noop registered
[ 1.184902] io scheduler deadline registered
[ 1.184961] io scheduler cfq registered (default)
[ 1.185904] intel_idle: does not run on family 6 model 23
[ 1.204073] ACPI: AC Adapter [ACAD] (on-line)
[ 1.204260] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 1.204332] ACPI: Lid Switch [LID0]
[ 1.204429] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.204495] ACPI: Power Button [PWRB]
[ 1.204594] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.204658] ACPI: Power Button [PWRF]
[ 1.205085] Monitor-Mwait will be used to enter C-1 state
[ 1.205103] Monitor-Mwait will be used to enter C-2 state
[ 1.205114] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.205522] GHES: HEST is not enabled!
[ 1.205786] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.456242] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 1.456362] ACPI: Battery Slot [BAT1] (battery present)
[ 1.456621] Linux agpgart interface v0.103
[ 1.459314] loop: module loaded
[ 1.459558] ata_piix 0000:00:1f.2: version 2.13
[ 1.459677] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 1.616448] scsi host0: ata_piix
[ 1.616653] scsi host1: ata_piix
[ 1.616766] ata1: SATA max UDMA/133 cmd 0x18f8 ctl 0x180c bmdma 0x18e0 irq 19
[ 1.616821] ata2: SATA max UDMA/133 cmd 0x18f0 ctl 0x1808 bmdma 0x18e8 irq 19
[ 1.616986] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.617389] scsi host2: ata_piix
[ 1.617573] scsi host3: ata_piix
[ 1.617683] ata3: SATA max UDMA/133 cmd 0x1c50 ctl 0x1c44 bmdma 0x1c30 irq 19
[ 1.617737] ata4: SATA max UDMA/133 cmd 0x1c48 ctl 0x1c40 bmdma 0x1c38 irq 19
[ 1.617922] libphy: Fixed MDIO Bus: probed
[ 1.617971] tun: Universal TUN/TAP device driver, 1.6
[ 1.618031] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.618162] PPP generic driver version 2.4.2
[ 1.618299] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.618356] ehci-pci: EHCI PCI platform driver
[ 1.618558] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.618618] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.618695] ehci-pci 0000:00:1a.7: debug port 1
[ 1.622646] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 1.622654] ehci-pci 0000:00:1a.7: irq 19, io mem 0xf2504000
[ 1.636071] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.636181] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.636234] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.636298] usb usb1: Product: EHCI Host Controller
[ 1.636347] usb usb1: Manufacturer: Linux 4.10.0-42-generic ehci_hcd
[ 1.636398] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.636634] hub 1-0:1.0: USB hub found
[ 1.636687] hub 1-0:1.0: 6 ports detected
[ 1.637154] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.637209] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.637288] ehci-pci 0000:00:1d.7: debug port 1
[ 1.641230] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.641244] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf2504400
[ 1.656054] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.656174] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.656227] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.656290] usb usb2: Product: EHCI Host Controller
[ 1.656339] usb usb2: Manufacturer: Linux 4.10.0-42-generic ehci_hcd
[ 1.656390] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.656621] hub 2-0:1.0: USB hub found
[ 1.656675] hub 2-0:1.0: 6 ports detected
[ 1.656944] ehci-platform: EHCI generic platform driver
[ 1.657020] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.657074] ohci-pci: OHCI PCI platform driver
[ 1.657136] ohci-platform: OHCI generic platform driver
[ 1.657193] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.657372] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.657427] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.657498] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.657575] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 1.657685] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.657737] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.657801] usb usb3: Product: UHCI Host Controller
[ 1.657849] usb usb3: Manufacturer: Linux 4.10.0-42-generic uhci_hcd
[ 1.657900] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.658113] hub 3-0:1.0: USB hub found
[ 1.658167] hub 3-0:1.0: 2 ports detected
[ 1.658468] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.658522] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.658592] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 1.658671] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 1.658781] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.658834] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.658896] usb usb4: Product: UHCI Host Controller
[ 1.658945] usb usb4: Manufacturer: Linux 4.10.0-42-generic uhci_hcd
[ 1.658996] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.659195] hub 4-0:1.0: USB hub found
[ 1.659249] hub 4-0:1.0: 2 ports detected
[ 1.659506] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.659561] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.659630] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 1.659700] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[ 1.659807] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.659860] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.659923] usb usb5: Product: UHCI Host Controller
[ 1.659972] usb usb5: Manufacturer: Linux 4.10.0-42-generic uhci_hcd
[ 1.660045] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.660266] hub 5-0:1.0: USB hub found
[ 1.660320] hub 5-0:1.0: 2 ports detected
[ 1.660626] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.660681] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.660751] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.660821] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 1.660925] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.660978] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.661041] usb usb6: Product: UHCI Host Controller
[ 1.661090] usb usb6: Manufacturer: Linux 4.10.0-42-generic uhci_hcd
[ 1.661140] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.661342] hub 6-0:1.0: USB hub found
[ 1.661396] hub 6-0:1.0: 2 ports detected
[ 1.661648] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.661706] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.661777] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.661847] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 1.661956] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.662008] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.662071] usb usb7: Product: UHCI Host Controller
[ 1.662120] usb usb7: Manufacturer: Linux 4.10.0-42-generic uhci_hcd
[ 1.662171] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.662367] hub 7-0:1.0: USB hub found
[ 1.662420] hub 7-0:1.0: 2 ports detected
[ 1.662674] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.662729] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.662798] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.662878] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 1.662988] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.663040] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.663103] usb usb8: Product: UHCI Host Controller
[ 1.663152] usb usb8: Manufacturer: Linux 4.10.0-42-generic uhci_hcd
[ 1.663203] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.663403] hub 8-0:1.0: USB hub found
[ 1.663459] hub 8-0:1.0: 2 ports detected
[ 1.663703] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.681186] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.681239] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.681491] mousedev: PS/2 mouse device common for all mice
[ 1.682382] rtc_cmos 00:02: RTC can wake from S4
[ 1.682619] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.682701] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.682772] i2c /dev entries driver
[ 1.682906] device-mapper: uevent: version 1.0.3
[ 1.683064] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 1.683165] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.683664] NET: Registered protocol family 10
[ 1.689507] Segment Routing with IPv6
[ 1.689584] NET: Registered protocol family 17
[ 1.689648] Key type dns_resolver registered
[ 1.690974] microcode: sig=0x1067a, pf=0x80, revision=0xa0b
[ 1.691082] microcode: Microcode Update Driver: v2.2.
[ 1.691273] registered taskstats version 1
[ 1.691381] Loading compiled-in X.509 certificates
[ 1.695389] Loaded X.509 cert 'Build time autogenerated kernel key: 08f7e76e35960ddc5f58d339c2ab190bcc4bf201'
[ 1.695496] zswap: loaded using pool lzo/zbud
[ 1.697950] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.713519] Key type big_key registered
[ 1.713576] Key type trusted registered
[ 1.716168] Key type encrypted registered
[ 1.716224] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.716275] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 1.716360] evm: HMAC attrs: 0x1
[ 1.716833] Magic number: 2:807:952
[ 1.716955] tty tty9: hash matches
[ 1.717051] memory memory5: hash matches
[ 1.717161] rtc_cmos 00:02: setting system clock to 2018-01-11 20:56:51 UTC (1515704211)
[ 1.717355] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.717405] EDD information not available.
[ 1.717533] PM: Hibernation image not present or could not be loaded.
[ 1.942061] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.942139] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.964020] usb 1-5: new high-speed USB device number 2 using ehci-pci
[ 1.965639] random: fast init done
[ 2.088083] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.088085] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.108190] ata3.00: ATAPI: HL-DT-STDVDRAM GT30N, TN08, max UDMA/100
[ 2.112881] ata3.00: configured for UDMA/100
[ 2.135713] ata2.00: ATA-8: TOSHIBA MK2565GSXN, GH101M, max UDMA/100
[ 2.135765] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.138542] ata2.00: configured for UDMA/100
[ 2.138841] scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK2565GS 1M PQ: 0 ANSI: 5
[ 2.164288] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 2.164307] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 2.164324] sd 1:0:0:0: [sda] Write Protect is off
[ 2.164326] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.164353] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.167499] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N TN08 PQ: 0 ANSI: 5
[ 2.180051] usb 6-1: new full-speed USB device number 2 using uhci_hcd
[ 2.195672] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.195738] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.195984] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.196103] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.204032] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e31c024913, max_idle_ns: 440795271206 ns
[ 2.255699] sda: sda1 sda2 < sda5 >
[ 2.256375] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.259468] Freeing unused kernel memory: 2228K
[ 2.259526] Write protecting the kernel read-only data: 14336k
[ 2.260492] Freeing unused kernel memory: 1156K
[ 2.261554] Freeing unused kernel memory: 268K
[ 2.272623] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.365283] usb 1-5: New USB device found, idVendor=0bda, idProduct=0138
[ 2.365344] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.365398] usb 1-5: Product: USB2.0-CRW
[ 2.365448] usb 1-5: Manufacturer: Generic
[ 2.365497] usb 1-5: SerialNumber: 20090516388200000
[ 2.376066] usb 6-1: New USB device found, idVendor=1532, idProduct=002f
[ 2.376124] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.376177] usb 6-1: Product: Razer Imperator
[ 2.376224] usb 6-1: Manufacturer: Razer
[ 2.377540] usbcore: registered new interface driver usb-storage
[ 2.379647] usbcore: registered new interface driver uas
[ 2.381659] ums-realtek 1-5:1.0: USB Mass Storage device detected
[ 2.402088] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.403411] FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
[ 2.418735] usbcore: registered new interface driver usbhid
[ 2.418791] usbhid: USB HID core driver
[ 2.420214] scsi host4: usb-storage 1-5:1.0
[ 2.420390] usbcore: registered new interface driver ums-realtek
[ 2.426760] [drm] Initialized
[ 2.427584] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.427649] r8169 0000:0e:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.428635] r8169 0000:0e:00.0 eth0: RTL8105e at 0xffff9f7800675000, 88:ae:1d:fd:65:7d, XID 00900000 IRQ 27
[ 2.478179] pci 0000:00:00.0: Intel GM45 Chipset
[ 2.478264] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.478622] pci 0000:00:00.0: detected 131072K stolen memory
[ 2.478725] [drm] Memory usable by graphics device = 2048M
[ 2.478785] [drm] Replacing VGA console driver
[ 2.479827] Console: switching to colour dummy device 80x25
[ 2.486218] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.486229] [drm] Driver supports precise vblank timestamp query.
[ 2.488752] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.492039] usb 1-6: new high-speed USB device number 3 using ehci-pci
[ 2.524765] input: Razer Razer Imperator as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/0003:1532:002F.0001/input/input6
[ 2.524944] hid-generic 0003:1532:002F.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer Imperator] on usb-0000:00:1d.0-1/input0
[ 2.527016] r8169 0000:0e:00.0 enp14s0: renamed from eth0
[ 2.529387] input: Razer Razer Imperator as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/0003:1532:002F.0002/input/input7
[ 2.533270] [drm] RC6 disabled, disabling runtime PM support
[ 2.546745] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.548293] acpi device:0a: registered as cooling_device2
[ 2.548399] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[ 2.588238] hid-generic 0003:1532:002F.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer Imperator] on usb-0000:00:1d.0-1/input1
[ 2.588348] [drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
[ 2.668909] usb 1-6: New USB device found, idVendor=04f2, idProduct=b1d6
[ 2.668920] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 2.668926] usb 1-6: Product: CNF9055
[ 2.668931] usb 1-6: Manufacturer: Sonix Technology Co., Ltd.
[ 2.674626] usb 1-5: USB disconnect, device number 2
[ 2.797301] fbcon: inteldrmfb (fb0) is primary device
[ 3.452097] psmouse serio1: synaptics: queried max coordinates: x [..5692], y [..4680]
[ 3.495400] Console: switching to colour frame buffer device 170x48
[ 3.514650] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.561774] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762
[ 3.561856] psmouse serio1: synaptics: Toshiba Satellite Pro C660 detected, limiting rate to 40pps.
[ 3.635828] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 6.122202] random: crng init done
[ 8.154943] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 9.559982] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 9.563168] systemd[1]: Detected architecture x86-64.
[ 9.625683] systemd[1]: Set hostname to <zemog-Satellite-Pro-C660>.
[ 11.273600] systemd[1]: Listening on udev Control Socket.
[ 11.277316] systemd[1]: Listening on Journal Socket (/dev/log).
[ 11.280940] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.284579] systemd[1]: Reached target Encrypted Volumes.
[ 11.288244] systemd[1]: Listening on Journal Socket.
[ 11.291765] systemd[1]: Reached target Remote File Systems (Pre).
[ 11.295334] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 12.314342] lp: driver loaded but no devices found
[ 12.400739] ppdev: user-space parallel port driver
[ 12.801122] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
[ 23.046641] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 23.142576] systemd-journald[260]: Received request to flush runtime journal from PID 1
[ 23.669959] toshiba_bluetooth: Toshiba ACPI Bluetooth device driver
[ 23.852477] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 23.876578] wmi: Mapper loaded
[ 23.968252] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20160930/utaddress-247)
[ 23.968261] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.968264] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20160930/utaddress-247)
[ 23.968268] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.968269] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20160930/utaddress-247)
[ 23.968272] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 23.968273] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 24.110230] media: Linux media interface: v0.10
[ 24.148370] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 24.171397] audit: type=1400 audit(1515704233.948:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=476 comm="apparmor_parser"
[ 24.171401] audit: type=1400 audit(1515704233.948:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=476 comm="apparmor_parser"
[ 24.171403] audit: type=1400 audit(1515704233.948:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=476 comm="apparmor_parser"
[ 24.171404] audit: type=1400 audit(1515704233.948:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=476 comm="apparmor_parser"
[ 24.172562] audit: type=1400 audit(1515704233.952:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=475 comm="apparmor_parser"
[ 24.172566] audit: type=1400 audit(1515704233.952:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=475 comm="apparmor_parser"
[ 24.188908] audit: type=1400 audit(1515704233.968:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=488 comm="apparmor_parser"
[ 24.188913] audit: type=1400 audit(1515704233.968:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=488 comm="apparmor_parser"
[ 24.188914] audit: type=1400 audit(1515704233.968:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=488 comm="apparmor_parser"
[ 24.188916] audit: type=1400 audit(1515704233.968:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=488 comm="apparmor_parser"
[ 24.225578] Linux video capture interface: v2.00
[ 24.337085] usb 3-2: New USB device found, idVendor=0930, idProduct=0214
[ 24.337088] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 24.337090] usb 3-2: Product: Askey Bluetooth Module
[ 24.337092] usb 3-2: Manufacturer: Broadcom Corp
[ 24.337093] usb 3-2: SerialNumber: 4CEDDE387C11
[ 24.451249] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.24
[ 24.453626] input: Toshiba input device as /devices/virtual/input/input9
[ 24.457808] toshiba_acpi: Supported laptop features: hotkeys eco-led cooling-method
[ 24.534257] uvcvideo: Found UVC 1.00 device CNF9055 (04f2:b1d6)
[ 24.543882] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
[ 24.543886] uvcvideo 1-6:1.0: Entity type for entity Processing 3 was not initialized!
[ 24.543889] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[ 24.544041] input: CNF9055 as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input10
[ 24.544727] usbcore: registered new interface driver uvcvideo
[ 24.544728] USB Video Class driver (1.1.1)
[ 24.833348] wl: loading out-of-tree module taints kernel.
[ 24.833353] wl: module license 'MIXED/Proprietary' taints kernel.
[ 24.833355] Disabling lock debugging due to kernel taint
[ 24.841403] wl: module verification failed: signature and/or required key missing - tainting kernel
[ 24.937704] wlan0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
[ 25.092583] intel_powerclamp: No package C-state available
[ 25.122776] intel_powerclamp: No package C-state available
[ 25.365459] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC259: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 25.365463] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 25.365465] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 25.365467] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 25.365468] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 25.365471] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 25.365473] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 25.373996] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 25.374091] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 25.696101] usb 3-2: USB disconnect, device number 2
[ 25.737641] Bluetooth: Core ver 2.22
[ 25.737716] NET: Registered protocol family 31
[ 25.737717] Bluetooth: HCI device and connection manager initialized
[ 25.737727] Bluetooth: HCI socket layer initialized
[ 25.737733] Bluetooth: L2CAP socket layer initialized
[ 25.737751] Bluetooth: SCO socket layer initialized
[ 25.833001] usbcore: registered new interface driver btusb
[ 25.912485] wl 0000:14:00.0 wlp20s0: renamed from wlan0
[ 26.771412] Adding 1956860k swap on /dev/sda5. Priority:-1 extents:1 across:1956860k FS
[ 31.437279] IPv6: ADDRCONF(NETDEV_UP): wlp20s0: link is not ready
[ 31.447014] IPv6: ADDRCONF(NETDEV_UP): enp14s0: link is not ready
[ 32.110824] r8169 0000:0e:00.0 enp14s0: link down
[ 32.110825] r8169 0000:0e:00.0 enp14s0: link down
[ 32.110884] IPv6: ADDRCONF(NETDEV_UP): enp14s0: link is not ready
[ 33.736906] r8169 0000:0e:00.0 enp14s0: link up
[ 33.736920] IPv6: ADDRCONF(NETDEV_CHANGE): enp14s0: link becomes ready
[ 38.054425] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 38.054427] Bluetooth: BNEP filters: protocol multicast
[ 38.054433] Bluetooth: BNEP socket layer initialized
[ 170.086490] show_signal_msg: 13 callbacks suppressed
[ 170.086494] compiz[1775]: segfault at 0 ip 00007f23e993ec16 sp 00007fffa07356a0 error 4 in i965_dri.so[7f23e9361000+82d000]Modération : merci d'utiliser les balises code (explications ici).
Dernière modification par cqfd93 (Le 13/01/2018, à 12:51)
Hors ligne
#2 Le 14/01/2018, à 16:55
- zemog
Re : dysfonctionnement graphique ou logiciel??
Bonjour de nouveau à la communauté.
N'y aurait-il personne pour m'aider à solutionner mon problème parmi l'ensemble d'experts?
Hors ligne
#3 Le 14/01/2018, à 17:55
- moko138
Re : dysfonctionnement graphique ou logiciel??
Ça ressemble beaucoup à un bug dont la solution a été récemment donnée sur le forum. As-tu cherché ?
En ./misc.php?action=rules, est écrit:
Conditions d'utilisation des forums
En participant à ce forum, vous vous engagez à respecter et faire respecter les termes ci-dessous. (...)
N'hésitez pas à poser une question, mais faites vos propres recherches avant : dans la documentation, par la fonction "Rechercher" du forum, avec un moteur de recherche. Souvent, la solution à votre problème existe et a déjà été traitée.
En haut à droite de cette page, il y a deux champs de recherche : ils sont là pour t'aider.
%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel : À la découverte de dcraw
Hors ligne