#1 Le 15/01/2018, à 23:31
- hollowspy
Besoin d'aide suite installation Ubuntu en dual boot :(
Bonjour messieurs dam',
Alors voilà,
Je me suis en quête d'installer Ubuntu suivant la doc fourni par le site en dual avec windows 8.1 (connaissance en informatique, certes un peu, mais pas trop poussés)
J'ai plutôt pris le temps de bien lire + tuto vidéo sous Youtube.
Installation d'Ubuntu => Bien passé, rien à dire. A la fin, je redémarre, pas de soucis, le GRUB me propose les deux choix : Ubuntu ou Windows system, alors je suis plutot heureux. Je relance Ubuntu pour voir si mon profil est sauvegardé => Niquel.
Alors j'éteinds et je vais lancer Windows 8.1, et là c'est le drame
Mon windows s'est bien lancé mais ensuite, à chaque redémarrage, impossible de lancer Ubuntu. (Pourtant, l'UEFI me proposait bien Ubuntu, mais pourtant, impossible).
Je chercher des solutions sur le Net, et je vois qu'on peut utiliser EasyBCD sous Windows, alors je le télécharge, et là certainement je rajoute Ubuntu en system Linux sur la partition du disque créé => Tres bien, ca marche désormais Ubuntu
Mais windows depuis est corrompu, imposible de le démarrer. J'ai tenté :
Récupération systeme
Réparation
Je suis retourné sous Ubuntu pour tenter de faire un boot-repair => Sans plus de succes
Rien ne marche.
Mon windows est bel et bien légal, mais je n'ai pas le cd (ordi donné par mes parents). J'ai le produit et l'étiquette dessus. J'ai bien compris qu'il s'agit d'un problème de boot BCD mais mes connaissances arrivent à leur limite.
Voici mon message d'erreur lors du lancement de Windows :
Windows failed to start. A recent hardware or software change might be the cause. To fix problem:
1) insert your Windows instalation disc and restart you computer.
2) Choose your language setings, and the click "Next."
3) Click "Repair you computer"
if you do not have this disc, contact your system adminstrator or computer manufacturer for assistance.
File: /BCD
Status: 0xc0000098
Info : The boot configuration Data file doesn't contain valid information for an operating system.
Pour information, voici le message de boot-repair :
Le démarrage de l'ordinateur a été correctement réparé.
Vous pouvez maintenant redémarrer votre ordinateur.
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sdb2/EFI/ubuntu/shimx64.efi !
Si votre ordinateur redémarre directement sur Windows, essayez de changer l'ordre de démarrage dans votre BIOS.
Si votre BIOS ne permet pas de changer l'ordre de démarrage, changez l'entrée de démarrage par défaut de l'amorceur Windows.
Par exemple, vous pouvez démarrer Windows, puis saisir la commande suivante dans une invite de commande en mode administrateur :
bcdedit /set {bootmgr} path \EFI\ubuntu\shimx64.efi
Et voici le code donné par Boot-repair
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sdb.
sdb1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb2: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 8/2012: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/Boot/bkpbootx64.efi
/EFI/Boot/bootx64.efi /EFI/ubuntu/fwupx64.efi
/EFI/ubuntu/grubx64.efi /EFI/ubuntu/mmx64.efi
/EFI/ubuntu/shimx64.efi
/EFI/HP/SystemDiags/CryptRSA.efi
/EFI/HP/SystemDiags/CryptRSA32.efi
/EFI/HP/SystemDiags/SystemDiags.efi
/EFI/HP/SystemDiags/SystemDiags32.efi
/EFI/HP/SystemRecovery/bootmgfw.efi
/EFI/Microsoft/Boot/bootmgfw.efi
/EFI/Microsoft/Boot/bootmgr.efi
/EFI/Microsoft/Boot/memtest.efi
sdb3: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sdb4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sdb5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb6: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 8/2012: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /boot/bcd
sdb7: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 16.04.3 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sdb8: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb9: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
============================ Drive/Partition Info: =============================
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdb1 R 2,048 2,097,151 2,095,104 Windows Recovery Environment (Windows)
/dev/sdb2 2,097,152 2,834,431 737,280 EFI System partition
/dev/sdb3 2,834,432 3,096,575 262,144 Microsoft Reserved Partition (Windows)
/dev/sdb4 3,096,576 1,754,083,327 1,750,986,752 Data partition (Windows/Linux)
/dev/sdb5 R 1,917,923,328 1,918,640,127 716,800 Windows Recovery Environment (Windows)
/dev/sdb6 R 1,918,640,128 1,953,523,711 34,883,584 Data partition (Windows/Linux)
/dev/sdb7 1,754,083,328 1,851,740,159 97,656,832 Data partition (Linux)
/dev/sdb8 1,851,740,160 1,900,568,575 48,828,416 Data partition (Linux)
/dev/sdb9 1,900,568,576 1,912,287,231 11,718,656 Swap partition (Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sdb1 C27841FD7841F129 ntfs Windows RE tools
/dev/sdb2 00CF-69A5 vfat SYSTEM
/dev/sdb3
/dev/sdb4 04E8CE6AE8CE5996 ntfs OS
/dev/sdb5 A42274B422748D54 ntfs
/dev/sdb6 B6A8D368A8D325A1 ntfs
/dev/sdb7 5cb3f566-8b6e-4deb-847d-be3e1703ee5f ext4
/dev/sdb8 a52338ce-8faa-4a4b-8cd6-c4c6bd9938d8 ext4
/dev/sdb9 2d242794-ad77-4b67-bd7c-7a4a72129c1e swap
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Jan 15 20:07 ata-WDC_WD10EZEX-60ZF5A0_WD-WCC1S1332741 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 15 20:08 ata-WDC_WD10EZEX-60ZF5A0_WD-WCC1S1332741-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 15 20:07 ata-WDC_WD10EZEX-60ZF5A0_WD-WCC1S1332741-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jan 15 20:07 ata-WDC_WD10EZEX-60ZF5A0_WD-WCC1S1332741-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 10 Jan 15 20:08 ata-WDC_WD10EZEX-60ZF5A0_WD-WCC1S1332741-part4 -> ../../sdb4
lrwxrwxrwx 1 root root 10 Jan 15 20:08 ata-WDC_WD10EZEX-60ZF5A0_WD-WCC1S1332741-part5 -> ../../sdb5
lrwxrwxrwx 1 root root 10 Jan 15 20:07 ata-WDC_WD10EZEX-60ZF5A0_WD-WCC1S1332741-part6 -> ../../sdb6
lrwxrwxrwx 1 root root 10 Jan 15 20:07 ata-WDC_WD10EZEX-60ZF5A0_WD-WCC1S1332741-part7 -> ../../sdb7
lrwxrwxrwx 1 root root 10 Jan 15 20:07 ata-WDC_WD10EZEX-60ZF5A0_WD-WCC1S1332741-part8 -> ../../sdb8
lrwxrwxrwx 1 root root 10 Jan 15 20:07 ata-WDC_WD10EZEX-60ZF5A0_WD-WCC1S1332741-part9 -> ../../sdb9
lrwxrwxrwx 1 root root 9 Jan 15 2018 ata-hp_DVD_A_DH16ACSHR_348302917004 -> ../../sr0
lrwxrwxrwx 1 root root 9 Jan 15 2018 usb-Multiple_Card_Reader_058F63666433-0:0 -> ../../sda
lrwxrwxrwx 1 root root 9 Jan 15 20:07 wwn-0x50014ee2b26145ac -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan 15 20:08 wwn-0x50014ee2b26145ac-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 15 20:07 wwn-0x50014ee2b26145ac-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Jan 15 20:07 wwn-0x50014ee2b26145ac-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 10 Jan 15 20:08 wwn-0x50014ee2b26145ac-part4 -> ../../sdb4
lrwxrwxrwx 1 root root 10 Jan 15 20:08 wwn-0x50014ee2b26145ac-part5 -> ../../sdb5
lrwxrwxrwx 1 root root 10 Jan 15 20:07 wwn-0x50014ee2b26145ac-part6 -> ../../sdb6
lrwxrwxrwx 1 root root 10 Jan 15 20:07 wwn-0x50014ee2b26145ac-part7 -> ../../sdb7
lrwxrwxrwx 1 root root 10 Jan 15 20:07 wwn-0x50014ee2b26145ac-part8 -> ../../sdb8
lrwxrwxrwx 1 root root 10 Jan 15 20:07 wwn-0x50014ee2b26145ac-part9 -> ../../sdb9
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sdb2 /boot/efi vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sdb6 /media/julien/B6A8D368A8D325A1 fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks2)
/dev/sdb7 / ext4 (rw,relatime,errors=remount-ro,data=ordered)
/dev/sdb8 /home ext4 (rw,relatime,data=ordered)
========================== sdb2/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid 5cb3f566-8b6e-4deb-847d-be3e1703ee5f root hd1,gpt7
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
=========================== sdb7/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd1,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt7 --hint-efi=hd1,gpt7 --hint-baremetal=ahci1,gpt7 5cb3f566-8b6e-4deb-847d-be3e1703ee5f
else
search --no-floppy --fs-uuid --set=root 5cb3f566-8b6e-4deb-847d-be3e1703ee5f
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-5cb3f566-8b6e-4deb-847d-be3e1703ee5f' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt7 --hint-efi=hd1,gpt7 --hint-baremetal=ahci1,gpt7 5cb3f566-8b6e-4deb-847d-be3e1703ee5f
else
search --no-floppy --fs-uuid --set=root 5cb3f566-8b6e-4deb-847d-be3e1703ee5f
fi
linux /boot/vmlinuz-4.13.0-26-generic.efi.signed root=UUID=5cb3f566-8b6e-4deb-847d-be3e1703ee5f ro quiet splash $vt_handoff
initrd /boot/initrd.img-4.13.0-26-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-5cb3f566-8b6e-4deb-847d-be3e1703ee5f' {
menuentry 'Ubuntu, with Linux 4.13.0-26-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-26-generic-advanced-5cb3f566-8b6e-4deb-847d-be3e1703ee5f' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt7 --hint-efi=hd1,gpt7 --hint-baremetal=ahci1,gpt7 5cb3f566-8b6e-4deb-847d-be3e1703ee5f
else
search --no-floppy --fs-uuid --set=root 5cb3f566-8b6e-4deb-847d-be3e1703ee5f
fi
echo 'Loading Linux 4.13.0-26-generic ...'
linux /boot/vmlinuz-4.13.0-26-generic.efi.signed root=UUID=5cb3f566-8b6e-4deb-847d-be3e1703ee5f ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.13.0-26-generic
}
menuentry 'Ubuntu, with Linux 4.13.0-26-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-26-generic-init-upstart-5cb3f566-8b6e-4deb-847d-be3e1703ee5f' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt7 --hint-efi=hd1,gpt7 --hint-baremetal=ahci1,gpt7 5cb3f566-8b6e-4deb-847d-be3e1703ee5f
else
search --no-floppy --fs-uuid --set=root 5cb3f566-8b6e-4deb-847d-be3e1703ee5f
fi
echo 'Loading Linux 4.13.0-26-generic ...'
linux /boot/vmlinuz-4.13.0-26-generic.efi.signed root=UUID=5cb3f566-8b6e-4deb-847d-be3e1703ee5f ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.13.0-26-generic
}
menuentry 'Ubuntu, with Linux 4.13.0-26-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.13.0-26-generic-recovery-5cb3f566-8b6e-4deb-847d-be3e1703ee5f' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt7 --hint-efi=hd1,gpt7 --hint-baremetal=ahci1,gpt7 5cb3f566-8b6e-4deb-847d-be3e1703ee5f
else
search --no-floppy --fs-uuid --set=root 5cb3f566-8b6e-4deb-847d-be3e1703ee5f
fi
echo 'Loading Linux 4.13.0-26-generic ...'
linux /boot/vmlinuz-4.13.0-26-generic.efi.signed root=UUID=5cb3f566-8b6e-4deb-847d-be3e1703ee5f ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.13.0-26-generic
}
menuentry 'Ubuntu, with Linux 4.10.0-28-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-advanced-5cb3f566-8b6e-4deb-847d-be3e1703ee5f' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt7 --hint-efi=hd1,gpt7 --hint-baremetal=ahci1,gpt7 5cb3f566-8b6e-4deb-847d-be3e1703ee5f
else
search --no-floppy --fs-uuid --set=root 5cb3f566-8b6e-4deb-847d-be3e1703ee5f
fi
echo 'Loading Linux 4.10.0-28-generic ...'
linux /boot/vmlinuz-4.10.0-28-generic root=UUID=5cb3f566-8b6e-4deb-847d-be3e1703ee5f ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.10.0-28-generic
}
menuentry 'Ubuntu, with Linux 4.10.0-28-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-init-upstart-5cb3f566-8b6e-4deb-847d-be3e1703ee5f' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt7 --hint-efi=hd1,gpt7 --hint-baremetal=ahci1,gpt7 5cb3f566-8b6e-4deb-847d-be3e1703ee5f
else
search --no-floppy --fs-uuid --set=root 5cb3f566-8b6e-4deb-847d-be3e1703ee5f
fi
echo 'Loading Linux 4.10.0-28-generic ...'
linux /boot/vmlinuz-4.10.0-28-generic root=UUID=5cb3f566-8b6e-4deb-847d-be3e1703ee5f ro quiet splash $vt_handoff init=/sbin/upstart
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.10.0-28-generic
}
menuentry 'Ubuntu, with Linux 4.10.0-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.10.0-28-generic-recovery-5cb3f566-8b6e-4deb-847d-be3e1703ee5f' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd1,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt7 --hint-efi=hd1,gpt7 --hint-baremetal=ahci1,gpt7 5cb3f566-8b6e-4deb-847d-be3e1703ee5f
else
search --no-floppy --fs-uuid --set=root 5cb3f566-8b6e-4deb-847d-be3e1703ee5f
fi
echo 'Loading Linux 4.10.0-28-generic ...'
linux /boot/vmlinuz-4.10.0-28-generic root=UUID=5cb3f566-8b6e-4deb-847d-be3e1703ee5f ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.10.0-28-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/25_custom ###
menuentry "Windows UEFI bootmgfw.efi" {
search --fs-uuid --no-floppy --set=root 00CF-69A5
chainloader (${root})/EFI/Microsoft/Boot/bootmgfw.efi
}
menuentry "Windows Boot UEFI loader" {
search --fs-uuid --no-floppy --set=root 00CF-69A5
chainloader (${root})/EFI/Boot/bkpbootx64.efi
}
menuentry "EFI/ubuntu/fwupx64.efi" {
search --fs-uuid --no-floppy --set=root 00CF-69A5
chainloader (${root})/EFI/ubuntu/fwupx64.efi
}
menuentry "EFI/ubuntu/mmx64.efi" {
search --fs-uuid --no-floppy --set=root 00CF-69A5
chainloader (${root})/EFI/ubuntu/mmx64.efi
}
menuentry "EFI/HP/SystemDiags/CryptRSA32.efi" {
search --fs-uuid --no-floppy --set=root 00CF-69A5
chainloader (${root})/EFI/HP/SystemDiags/CryptRSA32.efi
}
menuentry "EFI/HP/SystemDiags/CryptRSA.efi" {
search --fs-uuid --no-floppy --set=root 00CF-69A5
chainloader (${root})/EFI/HP/SystemDiags/CryptRSA.efi
}
menuentry "EFI/HP/SystemDiags/SystemDiags32.efi" {
search --fs-uuid --no-floppy --set=root 00CF-69A5
chainloader (${root})/EFI/HP/SystemDiags/SystemDiags32.efi
}
menuentry "EFI/HP/SystemDiags/SystemDiags.efi" {
search --fs-uuid --no-floppy --set=root 00CF-69A5
chainloader (${root})/EFI/HP/SystemDiags/SystemDiags.efi
}
menuentry "EFI/HP/SystemRecovery/bootmgfw.efi" {
search --fs-uuid --no-floppy --set=root 00CF-69A5
chainloader (${root})/EFI/HP/SystemRecovery/bootmgfw.efi
}
### END /etc/grub.d/25_custom ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (on /dev/sdb2)' --class windows --class os $menuentry_id_option 'osprober-efi-00CF-69A5' {
insmod part_gpt
insmod fat
set root='hd1,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt2 --hint-efi=hd1,gpt2 --hint-baremetal=ahci1,gpt2 00CF-69A5
else
search --no-floppy --fs-uuid --set=root 00CF-69A5
fi
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb7/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda7 during installation
UUID=5cb3f566-8b6e-4deb-847d-be3e1703ee5f / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda2 during installation
#UUID=00CF-69A5 /boot/efi vfat umask=0077 0 1
# /home was on /dev/sda8 during installation
UUID=a52338ce-8faa-4a4b-8cd6-c4c6bd9938d8 /home ext4 defaults 0 2
# swap was on /dev/sda9 during installation
UUID=2d242794-ad77-4b67-bd7c-7a4a72129c1e none swap sw 0 0
UUID=00CF-69A5 /boot/efi vfat defaults 0 1
--------------------------------------------------------------------------------
=================== sdb7: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
850.553752899 = 913.275138048 boot/grub/grub.cfg 1
837.903373718 = 899.691896832 boot/vmlinuz-4.10.0-28-generic 1
849.189472198 = 911.810252800 boot/vmlinuz-4.13.0-26-generic 1
849.356750488 = 911.989866496 boot/vmlinuz-4.13.0-26-generic.efi.signed 1
837.903373718 = 899.691896832 vmlinuz 1
849.529293060 = 912.175132672 boot/initrd.img-4.10.0-28-generic 2
849.474605560 = 912.116412416 boot/initrd.img-4.13.0-26-generic 2
849.529293060 = 912.175132672 initrd.img 2
849.529293060 = 912.175132672 initrd.img.old 2
========= Devices which don't seem to have a corresponding hard drive: =========
sda
ADDITIONAL INFORMATION :
=================== log of boot-repair 20180115_2007 ===================
boot-repair version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-repair is executed in installed-session (Ubuntu 16.04.3 LTS, xenial, Ubuntu, x86_64)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.13.0-26-generic.efi.signed root=UUID=5cb3f566-8b6e-4deb-847d-be3e1703ee5f ro quiet splash vt.handoff=7
=================== os-prober:
/dev/sdb7:L'OS actuellement utilisé - Ubuntu 16.04.3 LTS CurrentSession:linux
/dev/sdb2@/EFI/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi
=================== blkid:
/dev/sdb1: LABEL="Windows RE tools" UUID="C27841FD7841F129" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="68c203b4-e976-474a-b78e-eae60fa8ab01"
/dev/sdb2: LABEL="SYSTEM" UUID="00CF-69A5" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="6f10c3a8-cfb4-4c35-a78b-a250cf4e4076"
/dev/sdb4: LABEL="OS" UUID="04E8CE6AE8CE5996" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="544d07ed-9513-41c5-99eb-38836aff25ae"
/dev/sdb5: UUID="A42274B422748D54" TYPE="ntfs" PARTUUID="b2563213-8f63-4133-b36a-685a00ff978d"
/dev/sdb6: UUID="B6A8D368A8D325A1" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="397fcc9c-ba25-4d52-bc5a-a9ff307dd030"
/dev/sdb7: UUID="5cb3f566-8b6e-4deb-847d-be3e1703ee5f" TYPE="ext4" PARTUUID="bbaaa2e5-f044-445a-ae58-02df235a0d79"
/dev/sdb8: UUID="a52338ce-8faa-4a4b-8cd6-c4c6bd9938d8" TYPE="ext4" PARTUUID="f83757f4-c519-42cf-a858-6cd0e7882080"
/dev/sdb9: UUID="2d242794-ad77-4b67-bd7c-7a4a72129c1e" TYPE="swap" PARTUUID="07f73ab4-6232-477d-a328-78306b152904"
/dev/sdb3: PARTLABEL="Microsoft reserved partition" PARTUUID="b6d39b6b-d872-4f7b-bcf6-2b0e9f125f24"
1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Windows not detected by os-prober on sdb4.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 janv. 15 18:16 grub.d
total 80
-rwxr-xr-x 1 root root 9791 juin 21 2017 00_header
-rwxr-xr-x 1 root root 6258 mars 15 2016 05_debian_theme
-rwxr-xr-x 1 root root 12512 juin 21 2017 10_linux
-rwxr-xr-x 1 root root 11082 juin 21 2017 20_linux_xen
-rwxr-xr-x 1 root root 1992 janv. 28 2016 20_memtest86+
-rwxr-xr-x 1 root root 11692 juin 21 2017 30_os-prober
-rwxr-xr-x 1 root root 1418 juin 21 2017 30_uefi-firmware
-rwxr-xr-x 1 root root 214 juin 21 2017 40_custom
-rwxr-xr-x 1 root root 216 juin 21 2017 41_custom
-rw-r--r-- 1 root root 483 juin 21 2017 README
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sdb7: UUID=00CF-69A5 (sdb2)
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bootx64.efi
Presence of EFI/Microsoft file detected: /media/julien/B6A8D368A8D325A1/EFI/Microsoft/Boot/cdboot.efi
Presence of EFI/Microsoft file detected: /media/julien/B6A8D368A8D325A1/EFI/Microsoft/Boot/cdboot_noprompt.efi
Presence of EFI/Boot file detected: /media/julien/B6A8D368A8D325A1/EFI/Boot/bootx64.efi
Presence of EFI/Boot file detected: /media/julien/B6A8D368A8D325A1/EFI/Boot/bootx64.efi.efi
=================== efibootmgr -v
BootCurrent: 0000
Timeout: 2 seconds
BootOrder: 0001,0002,0009,000A,0006,0007,0000
Boot0000* ubuntu HD(2,GPT,6f10c3a8-cfb4-4c35-a78b-a250cf4e4076,0x200000,0xb4000)/File(EFIubuntushimx64.efi)
Boot0001* USB Floppy/CD VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)AMBO
Boot0002* USB Hard Drive VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)AMBO
Boot0006 USB Floppy/CD VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0500000000)AMBO
Boot0007 Hard Drive VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0200000000)AMBO
Boot0009* UEFI: Ipv4 Network Card PciRoot(0x0)/Pci(0x7,0x0)/Pci(0x0,0x0)/MAC(78e3b5b98dbe,0)/IPv4(0.0.0.0:0<->0.0.0.0:0,0,0)AMBO
Boot000A* UEFI: Ipv6 Network Card PciRoot(0x0)/Pci(0x7,0x0)/Pci(0x0,0x0)/MAC(78e3b5b98dbe,0)/IPv6([::]:<->[::]:,0,0)AMBO
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)
=================== PARTITIONS & DISKS:
sdb7 : sdb, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, .
sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sdb1.
sdb2 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /boot/efi.
sdb4 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /media/julien/OS.
sdb5 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /mnt/boot-sav/sdb5.
sdb6 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-maybe-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, recovery-or-hidden, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /media/julien/B6A8D368A8D325A1.
sdb8 : sdb, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, notbiosboot, /home.
sdb : GPT, no-BIOS_boot, has-correctEFI, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sdb:1000GB:scsi:512:4096:gpt:ATA WDC WD10EZEX-60Z:;
1:1049kB:1074MB:1073MB:ntfs:Basic data partition:hidden, diag;
2:1074MB:1451MB:377MB:fat32:EFI system partition:boot, esp;
3:1451MB:1585MB:134MB::Microsoft reserved partition:msftres;
4:1585MB:898GB:897GB:ntfs:Basic data partition:msftdata;
7:898GB:948GB:50.0GB:ext4::;
8:948GB:973GB:25.0GB:ext4::;
9:973GB:979GB:6000MB:linux-swap(v1)::;
5:982GB:982GB:367MB:ntfs::hidden, diag;
6:982GB:1000GB:17.9GB:ntfs:Basic data partition:hidden, msftdata;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sdb disk 931,5G
sdb4 part ntfs 835G OS
sdb2 part vfat 360M SYSTEM
sdb9 part swap 5,6G
sdb7 part ext4 46,6G
sdb5 part ntfs 350M
sdb3 part 128M
sdb1 part ntfs 1023M Windows RE tools
sdb8 part ext4 23,3G
sdb6 part ntfs 16,6G
sr0 rom 1024M
KNAME ROTA RO RM STATE MOUNTPOINT
sdb 1 0 0 running
sdb4 1 0 0 /media/julien/OS
sdb2 1 0 0 /boot/efi
sdb9 1 0 0 [SWAP]
sdb7 1 0 0 /
sdb5 1 0 0 /mnt/boot-sav/sdb5
sdb3 1 0 0
sdb1 1 0 0 /mnt/boot-sav/sdb1
sdb8 1 0 0 /home
sdb6 1 0 0 /media/julien/B6A8D368A8D325A1
sr0 1 0 1 running
=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=2717664k,nr_inodes=679416,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=548140k,mode=755)
/dev/sdb7 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,release_agent=/lib/systemd/systemd-cgroups-agent,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=31,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=12900)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
/dev/sdb2 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sdb8 on /home type ext4 (rw,relatime,data=ordered)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=548140k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/sdb4 on /media/julien/OS type fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks2)
/dev/sdb6 on /media/julien/B6A8D368A8D325A1 type fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096,uhelper=udisks2)
/dev/sdb1 on /mnt/boot-sav/sdb1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sdb5 on /mnt/boot-sav/sdb5 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 drm_dp_aux1 dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hpet hugepages hwrng i2c-0 i2c-1 i2c-10 i2c-11 i2c-12 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 i2c-9 initctl input kfd kmsg kvm lightnvm log mapper mcelog mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sdb sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb userio vfio vga_arbiter vhci vhost-net vhost-vsock zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sdb1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 ff f7 1f 00 00 00 00 00 |................|
00000030 00 55 01 00 00 00 00 00 02 00 00 00 00 00 00 00 |.U..............|
00000040 f6 00 00 00 01 00 00 00 29 f1 41 78 fd 41 78 c2 |........).Ax.Ax.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdb2
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 08 6e 1a |.X.MSDOS5.0...n.|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 00 20 00 |........?..... .|
00000020 00 40 0b 00 c9 02 00 00 00 00 00 00 02 00 00 00 |.@..............|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 a5 69 cf 00 4e 4f 20 4e 41 4d 45 20 20 |..).i..NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 56 40 88 4e 02 8a 56 |{......|.V@.N..V|
00000070 40 b4 41 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a |@.A..U..r...U.u.|
00000080 f6 c1 01 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd |...t..F..-.V@...|
00000090 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 |.s......f...@f..|
000000a0 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 |...?.......Af...|
000000b0 66 f7 e1 66 89 46 f8 83 7e 16 00 75 39 83 7e 2a |f..f.F..~..u9.~*|
000000c0 00 77 33 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 |.w3f.F.f........|
000000d0 00 e8 2c 00 e9 a8 03 a1 f8 7d 80 c4 7c 8b f0 ac |..,......}..|...|
000000e0 84 c0 74 17 3c ff 74 09 b4 0e bb 07 00 cd 10 eb |..t.<.t.........|
000000f0 ee a1 fa 7d eb e4 a1 7d 80 eb df 98 cd 16 cd 19 |...}...}........|
00000100 66 60 80 7e 02 00 0f 84 20 00 66 6a 00 66 50 06 |f`.~.... .fj.fP.|
00000110 53 66 68 10 00 01 00 b4 42 8a 56 40 8b f4 cd 13 |Sfh.....B.V@....|
00000120 66 58 66 58 66 58 66 58 eb 33 66 3b 46 f8 72 03 |fXfXfXfX.3f;F.r.|
00000130 f9 eb 2a 66 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 |..*f3.f..N.f....|
00000140 8a ca 66 8b d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 |..f..f....v....V|
00000150 40 8a e8 c0 e4 06 0a cc b8 01 02 cd 13 66 61 0f |@............fa.|
00000160 82 74 ff 81 c3 00 02 66 40 49 75 94 c3 42 4f 4f |.t.....f@Iu..BOO|
00000170 54 4d 47 52 20 20 20 20 00 00 00 00 00 00 00 00 |TMGR ........|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 44 69 |..............Di|
000001b0 73 6b 20 65 72 72 6f 72 ff 0d 0a 50 72 65 73 73 |sk error...Press|
000001c0 20 61 6e 79 20 6b 65 79 20 74 6f 20 72 65 73 74 | any key to rest|
000001d0 61 72 74 0d 0a 00 00 00 00 00 00 00 00 00 00 00 |art.............|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 ac 01 b9 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdb4
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 40 2f 00 |........?....@/.|
00000020 00 00 00 00 80 00 80 00 ff ef 5d 68 00 00 00 00 |..........]h....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 96 59 ce e8 6a ce e8 04 |.........Y..j...|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sdb5
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 30 51 72 |........?....0Qr|
00000020 00 00 00 00 80 00 80 00 ff ef 0a 00 00 00 00 00 |................|
00000030 aa 74 00 00 00 00 00 00 02 00 00 00 00 00 00 00 |.t..............|
00000040 f6 00 00 00 01 00 00 00 54 8d 74 22 b4 74 22 a4 |........T.t".t".|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 45 72 72 65 |............Erre|
00000190 75 72 20 6c 65 63 74 75 72 65 20 64 69 73 71 75 |ur lecture disqu|
000001a0 65 00 0d 0a 42 4f 4f 54 4d 47 52 20 63 6f 6d 70 |e...BOOTMGR comp|
000001b0 72 65 73 73 82 00 0d 0a 43 74 72 6c 2b 41 6c 74 |ress....Ctrl+Alt|
000001c0 2b 53 75 70 70 72 20 70 6f 75 72 20 72 65 64 82 |+Suppr pour red.|
000001d0 6d 61 72 72 65 72 0d 0a 00 73 74 61 72 74 0d 0a |marrer...start..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a2 01 b6 01 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdb6
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 20 5c 72 |........?.... r|
00000020 00 00 00 00 80 00 80 00 ff 47 14 02 00 00 00 00 |.........G......|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 a1 25 d3 a8 68 d3 a8 b6 |.........%..h...|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 52 11 16 68 09 00 66 53 66 53 66 |h...hR..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 0a 13 b9 f6 0c fc f3 aa e9 fe 01 90 90 66 60 1e |.............f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a1 f6 01 e8 09 00 |...u...fa.......|
00000170 a1 fa 01 e8 03 00 f4 eb fd 8b f0 ac 3c 00 74 09 |............<.t.|
00000180 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 64 69 |............A di|
00000190 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 6f 63 |sk read error oc|
000001a0 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d 47 52 |curred...BOOTMGR|
000001b0 20 69 73 20 63 6f 6d 70 72 65 73 73 65 64 00 0d | is compressed..|
000001c0 0a 50 72 65 73 73 20 43 74 72 6c 2b 41 6c 74 2b |.Press Ctrl+Alt+|
000001d0 44 65 6c 20 74 6f 20 72 65 73 74 61 72 74 0d 0a |Del to restart..|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 8a 01 a7 01 bf 01 00 00 55 aa |..............U.|
00000200
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 2.6G 0 2.6G 0% /dev
tmpfs tmpfs 536M 8.1M 528M 2% /run
/dev/sdb7 ext4 46G 5.0G 39G 12% /
tmpfs tmpfs 2.7G 1.1M 2.7G 1% /dev/shm
tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs tmpfs 2.7G 0 2.7G 0% /sys/fs/cgroup
/dev/sdb2 vfat 356M 40M 317M 12% /boot/efi
/dev/sdb8 ext4 23G 110M 22G 1% /home
tmpfs tmpfs 536M 56K 536M 1% /run/user/1000
/dev/sdb4 fuseblk 835G 59G 777G 7% /media/julien/OS
/dev/sdb6 fuseblk 17G 15G 2.1G 88% /media/julien/B6A8D368A8D325A1
/dev/sdb1 fuseblk 1023M 357M 667M 35% /mnt/boot-sav/sdb1
/dev/sdb5 fuseblk 350M 281M 70M 81% /mnt/boot-sav/sdb5
=================== fdisk -l:
Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: B36BF7CC-39BB-45E4-AD9A-8A4632D6B7C2
Device Start End Sectors Size Type
/dev/sdb1 2048 2097151 2095104 1023M Windows recovery environment
/dev/sdb2 2097152 2834431 737280 360M EFI System
/dev/sdb3 2834432 3096575 262144 128M Microsoft reserved
/dev/sdb4 3096576 1754083327 1750986752 835G Microsoft basic data
/dev/sdb5 1917923328 1918640127 716800 350M Windows recovery environment
/dev/sdb6 1918640128 1953523711 34883584 16.6G Microsoft basic data
/dev/sdb7 1754083328 1851740159 97656832 46.6G Linux filesystem
/dev/sdb8 1851740160 1900568575 48828416 23.3G Linux filesystem
/dev/sdb9 1900568576 1912287231 11718656 5.6G Linux swap
Partition table entries are not in disk order.
=================== Recommended repair
The default repair of the Boot-Repair utility will reinstall the grub-efi-amd64-signed of sdb7, using the following options: sdb2/boot/efi,
Additional repair will be performed: unhide-bootmenu-10s use-standard-efi-file
/boot/efi added in sdb7/fstab
sdb7/boot/efi not empty
*******lspci -nnk | grep -iA3 vga
00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7480D] [1002:9993]
Subsystem: Hewlett-Packard Company Trinity [Radeon HD 7480D] [103c:2ae0]
Kernel driver in use: radeon
Kernel modules: radeon
*******
grub-install --version
grub-install (GRUB) 2.02~beta2-36ubuntu3.15,grub-install (GRUB) 2.
efibootmgr -v
BootCurrent: 0000
Timeout: 2 seconds
BootOrder: 0001,0002,0009,000A,0006,0007,0000
Boot0000* ubuntu HD(2,GPT,6f10c3a8-cfb4-4c35-a78b-a250cf4e4076,0x200000,0xb4000)/File(EFIubuntushimx64.efi)
Boot0001* USB Floppy/CD VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)AMBO
Boot0002* USB Hard Drive VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)AMBO
Boot0006 USB Floppy/CD VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0500000000)AMBO
Boot0007 Hard Drive VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0200000000)AMBO
Boot0009* UEFI: Ipv4 Network Card PciRoot(0x0)/Pci(0x7,0x0)/Pci(0x0,0x0)/MAC(78e3b5b98dbe,0)/IPv4(0.0.0.0:0<->0.0.0.0:0,0,0)AMBO
Boot000A* UEFI: Ipv6 Network Card PciRoot(0x0)/Pci(0x7,0x0)/Pci(0x0,0x0)/MAC(78e3b5b98dbe,0)/IPv6([::]:<->[::]:,0,0)AMBO
uname -r
Kernel: 4.13.0-26-generic
Reinstall the grub-efi-amd64-signed of sdb7
Installing for x86_64-efi platform.
Installation finished. No error reported.
grub-install --efi-directory=/boot/efi --target=x86_64-efi --uefi-secure-boot : exit code of grub-install :0
efi files in sdb2/efi: /Microsoft/Boot/memtest.efi /Microsoft/Boot/bootmgr.efi /Microsoft/Boot/bootmgfw.efi /HP/SystemRecovery/bootmgfw.efi /HP/SystemDiags/SystemDiags.efi /HP/SystemDiags/SystemDiags32.efi /HP/SystemDiags/CryptRSA.efi /HP/SystemDiags/CryptRSA32.efi /ubuntu/shimx64.efi /ubuntu/mmx64.efi /ubuntu/grubx64.efi /ubuntu/fwupx64.efi /Boot/bootx64.efi
ls: impossible d'accéder à '/media/julien/OS/': Aucun fichier ou dossier de ce type
ls: impossible d'accéder à '/media/julien/OS/': Aucun fichier ou dossier de ce type
cp /boot/efi/EFI/ubuntu/shimx64.efi /media/julien/B6A8D368A8D325A1/efi/ubuntu/shimx64.efi
df /dev/sdb2
Save and rename /boot/efi/EFI/Boot/bootx64.efi (/boot/efi/EFI/Boot/bkpbootx64.efi)
cp /boot/efi/EFI/ubuntu/shimx64.efi /boot/efi/EFI/Boot/bootx64.efi
efi files in sdb2/efi: /Microsoft/Boot/memtest.efi /Microsoft/Boot/bootmgr.efi /Microsoft/Boot/bootmgfw.efi /HP/SystemRecovery/bootmgfw.efi /HP/SystemDiags/SystemDiags.efi /HP/SystemDiags/SystemDiags32.efi /HP/SystemDiags/CryptRSA.efi /HP/SystemDiags/CryptRSA32.efi /ubuntu/shimx64.efi /ubuntu/mmx64.efi /ubuntu/grubx64.efi /ubuntu/fwupx64.efi /Boot/bootx64.efi /Boot/bkpbootx64.efi
Add /boot/efi efi entries in /etc/grub.d/25_custom
Adding custom /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Adding custom /boot/efi/EFI/Boot/bkpbootx64.efi
sdb2/bkpbootx64.efi already added
Adding custom /boot/efi/EFI/ubuntu/fwupx64.efi
Adding custom /boot/efi/EFI/ubuntu/mmx64.efi
Adding custom /boot/efi/EFI/HP/SystemDiags/CryptRSA32.efi
Adding custom /boot/efi/EFI/HP/SystemDiags/CryptRSA.efi
Adding custom /boot/efi/EFI/HP/SystemDiags/SystemDiags32.efi
Adding custom /boot/efi/EFI/HP/SystemDiags/SystemDiags.efi
Adding custom /boot/efi/EFI/HP/SystemRecovery/bootmgfw.efi
sdb2/bootmgfw.efi already added
ls: impossible d'accéder à '/media/julien/OS/': Aucun fichier ou dossier de ce type
ls: impossible d'accéder à '/media/julien/OS/': Aucun fichier ou dossier de ce type
df /dev/sdb6
cp /boot/efi/EFI/ubuntu/shimx64.efi /media/julien/B6A8D368A8D325A1/efi/Boot/bootx64.efi (& .grb)
efi files in sdb6/efi: /ubuntu/shimx64.efi /Boot/bootx64.efi
Add /media/julien/B6A8D368A8D325A1 efi entries in /etc/grub.d/25_custom
Installing for x86_64-efi platform.
Installation finished. No error reported.
grub-install --efi-directory=/boot/efi --target=x86_64-efi --uefi-secure-boot : exit code of grub-install :0
efibootmgr -v
BootCurrent: 0000
Timeout: 2 seconds
BootOrder: 0000,0001,0002,0009,000A,0006,0007
Boot0000* ubuntu HD(2,GPT,6f10c3a8-cfb4-4c35-a78b-a250cf4e4076,0x200000,0xb4000)/File(EFIubuntushimx64.efi)
Boot0001* USB Floppy/CD VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0500000001)AMBO
Boot0002* USB Hard Drive VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0200000001)AMBO
Boot0006 USB Floppy/CD VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0500000000)AMBO
Boot0007 Hard Drive VenMedia(b6fef66f-1495-4584-a836-3492d1984a8d,0200000000)AMBO
Boot0009* UEFI: Ipv4 Network Card PciRoot(0x0)/Pci(0x7,0x0)/Pci(0x0,0x0)/MAC(78e3b5b98dbe,0)/IPv4(0.0.0.0:0<->0.0.0.0:0,0,0)AMBO
Boot000A* UEFI: Ipv6 Network Card PciRoot(0x0)/Pci(0x7,0x0)/Pci(0x0,0x0)/MAC(78e3b5b98dbe,0)/IPv6([::]:<->[::]:,0,0)AMBO
update-grub
Generating grub configuration file ...
Found linux image: /boot/vmlinuz-4.13.0-26-generic
Found initrd image: /boot/initrd.img-4.13.0-26-generic
Found linux image: /boot/vmlinuz-4.10.0-28-generic
Found initrd image: /boot/initrd.img-4.10.0-28-generic
Found Windows Boot Manager on /dev/sdb2@/EFI/Microsoft/Boot/bootmgfw.efi
Adding boot menu entry for EFI firmware configuration
Unhide GRUB boot menu in sdb7/boot/grub/grub.cfg
Si quelqu'un veut bien se donner la peine de vouloir m'aider, je vous serais grandement reconnaissant !!
Vous remerciant d'avance,
Cordialement
Hors ligne
#2 Le 15/01/2018, à 23:39
- metalux
Re : Besoin d'aide suite installation Ubuntu en dual boot :(
Bonsoir,
Je laisse les experts en boot-info te dépanner. Par contre avais-tu désactivé le démarrage rapide de Windows? Il empêche Ubuntu de se lancer après un redémarrage, je suppose que ce n'était que ça au début. Lors de mises à jour windows, ce démarrage rapide se réactive parfois, aussi si ça se représente, toujours regarder de ce côté en 1er.
Hors ligne
#3 Le 15/01/2018, à 23:42
- hollowspy
Re : Besoin d'aide suite installation Ubuntu en dual boot :(
Bonsoir,
Non, je l'avais bien fait comme c'était précisé dans la doc .
Mais merci quand même
Pour l'instant, je peux me servir de mon PC, mais que de Ubuntu.
En ce moment, je télécharge une version ISO officiel sur microsoft.com de Windows 8.1 pour voir si je peux le booter demain matin pour réparer windows
Hors ligne
#4 Le 15/01/2018, à 23:52
- metalux
Re : Besoin d'aide suite installation Ubuntu en dual boot :(
En faisant une recherche sur le code erreur, il semble qu'il y ait une possibilité de réparer sans cd avec le mode sans échec de Windows.
http://forums.cnetfrance.fr/topic/13443 … xc0000098/
Je ne te serai pas d'une grande aide, ceci concernant plus windows qu'ubuntu.
Hors ligne
#5 Le 16/01/2018, à 00:27
- ??
Re : Besoin d'aide suite installation Ubuntu en dual boot :(
Bonsoir.
Tentes malgré tout la touche MAJ F10 tel que proposé. Mais je crains qu'en dual boot cela ce soit pas efficace.
Il faudrait peut-être appuyer immédiatement après que tu aies choisis de lancer windows via ubuntu
Je pense que tu n'y couperas pas d'utiliser le support d'installation de windows et qu'il saura réparer la structure EFI que easybcd a détruit. Tu as confondu avec easyefi.
Si tu ne peux pas réparer facilement, n'hésites pas à réinstaller windows.
Car les aidant windows dans ce forum sont peu nombreux et l'un ne s'est pas manifesté en 2018
le second va certainement voir ta discussion bientôt et le dernier te propose une reinstallation de windows car cela règle le problème en une heure.
Nota Si tu pilotes bien, tu peux réinstaller windows au même endroit en préservant les données et même le vieil OS ce qui est presque dommages car après pour l'enlever c'est dur.
Alors le plus simple est de faire en sorte que dans le disque, il y ait un espace libre de 50 Go de libre.
Dernière modification par ?? (Le 16/01/2018, à 00:44)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#6 Le 16/01/2018, à 09:59
- hollowspy
Re : Besoin d'aide suite installation Ubuntu en dual boot :(
Re bonjour la communauté Ubuntu
J'ai du nouveau ET du moins bien
J'ai suivi le tuto fait par ce mec : https://www.malekal.com/erreur-bcd/
Franchement : niquel. Ainsi, mon windows redémarre vu que l'EFI refonctionne donc c'est cool. (bon, j'avais testé une restauration usine hier, donc j'ai tout perdu, mais j'avais pas grand chose donc pas grave).
Quand, je fais gestion des disques sous windows, je vois que j'ai bien mes partitions ubuntu, donc parfait encore. Probleme, impossible de relancer ubuntu comme ca, je suis obligé de le faire avec un live cd/usb.
Pas de soucis, je le lance comme ca, sans l'installer, je fais un boot repair pour réamorcer le GRUB. Ca marche niquel. Je redémarre Ubuntu, et là j'arrive sur le GRUB où on me propose plusieurs choix dont Ubuntu et Windows, je dis parfait.
MAIS
Ensuite, à partir du moment où je choisit Windows, à aucun moment ensuite sur des redémarrages, je ne peux choisir Ubuntu par la suite (le GRUB disparait ou alors, c'est automatiquement forcé sur Windows). Ce qui était mon problème intitial. Je vais pas aller faire d'autre bétise, donc, pouvez vous me donner une démarche à suivre pour que le GRUB apparaisse à chaque démarrage de l'ordi (peu importe si j'étais sous Windows ou Ubuntu auparant).
Version de Windows : 8
Version d'Ubuntu : 16.04
Merci d'avance
edit : j'ai bien évidemment enlever de suite le démarrage rapide sous Windows après la réinstallation, mais ca ne change pas mon probleme
Dernière modification par hollowspy (Le 16/01/2018, à 10:05)
Hors ligne
#7 Le 16/01/2018, à 12:13
- ??
Re : Besoin d'aide suite installation Ubuntu en dual boot :(
Bonjour.
Re bonjour l
J'ai du nouveau ET du moins bien
J'ai suivi le tuto fait par ce mec : https://www.malekal.com/erreur-bcd/
Franchement : niquel.
Effectivement, c'est un très bon document que je ne connaissais pas
Ensuite, à partir du moment où je choisis Windows, à aucun moment ensuite sur des redémarrages, je ne peux choisir Ubuntu par la suite (le GRUB disparait ou alors, c'est automatiquement forcé sur Windows). Ce qui était mon problème intitial. Je vais pas aller faire d'autre bétise, donc, pouvez vous me donner une démarche à suivre pour que le GRUB apparaisse à chaque démarrage de l'ordi (peu importe si j'étais sous Windows ou Ubuntu auparant).
(
Ce problème est parfaitement identifié dans la documentation https://doc.ubuntu-fr.org/uefi#contourn … _windows_8
Comme tu as un HP, le conseil classique est de dire que le choix de ubuntu se fait en appuyant sur la touche F9 (dans certains cas F10? F11? F12?) et de choisir ubuntu et de s'en tenit à cette méthode.
Comme je constate que tu te débrouilles bien avec windows, je te propose de regarder si cette commande faite en mode administratif sous windows résout le problème
bcdedit /set {bootmgr} path \EFI\ubuntu\grubx64.efi
C'est une réparation qui disparait lors de grosses mises à jour de windows et qui est donc à refaire.
J'ai mis grubx64 au lieu de shimx64 car ton boot n'est pas en mode secure
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled.
Sinon tu as la solution de dire que ubuntu c'est windows. J'appelle cela le mode kamikaze car si on rate, on est bon pour tout réparer. mMais tu connais. (paragraphes 6.1 6.2 et 6.3).
C'est aussi une réparation qui disparait lors de grosses mises à jour de windows et qui fiche un gros bordel lors d'une nouvelle installation standard de ubuntu et qu'il est aussi récessaire de refaire car le windows standard n'est pas l'officiel.
(En standard, choisir de lancer windows aboutit à lancer de nouveau ubuntu).
Dernière modification par ?? (Le 16/01/2018, à 12:20)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#8 Le 16/01/2018, à 12:25
- metalux
Re : Besoin d'aide suite installation Ubuntu en dual boot :(
Bonjour,
J'ai déjà rencontré ça sur un Pc toshiba, et j'avais utilisé efibootmgr pour pouvoir démarrer sur le grub. Lors du démarrage sur Windows, l'ordre du boot était écrasé pour redémarrer sur Windows. Je ne suis pas sûr de moi comme ça fait longtemps de ça que je l'ai fais mais je pense que tu es confronté au même problème quand je vois:
efibootmgr -v
BootCurrent: 0000
Timeout: 2 seconds
BootOrder: 0001,0002,0009,000A,0006,0007,0000
Le bootCurrent est le 0000 or il se trouve en dernier sur BootOrder. Tu peux essayer de le remettre en 1er avec efibootmgr mais vu ce que tu dis après un boot-repair, le démarrage de Windows semble l'écraser.
Il y a 2 solutions. Sur ton Pc, il doit y avoir une touche pour accéder au menu de démarrage. Il faut parfois activer cette fonction dans le bios. Dans le menu de démarrage, tu sélectionnes ton disque et là tu devrais avoir le choix entre Ubuntu et Windows.
Voici les touches les plus courantes en fonction des marques:
Acer - Esc, F9, F12
ASUS - Esc, F8
Compaq - Esc, F9
Dell - F12
EMachines - F12
HP - Esc, F9
Intel - F10
Lenovo - F8, F10, F12
NEC - F5
Packard Bell - F8
Samsung - Esc, F12
Sony - F11, F12
Toshiba - F12
Si ça fonctionne comme ça, tu le fais à chaque démarrage ou sinon, plus risqué, il faudrait faire croire au PC que le bootloader de Windows est celui du Grub, je l'avais fait et ça fonctionne. J'essaye de te retrouver la discussion qui m'a permis de le faire.
Ajout: Trouvé! Je m'étais inspiré de cette réponse.
Attention néanmoins à bien comprendre ce que tu fais.
Dernière modification par metalux (Le 16/01/2018, à 12:38)
Hors ligne
#9 Le 16/01/2018, à 14:50
- hollowspy
Re : Besoin d'aide suite installation Ubuntu en dual boot :(
Merci de vos retours à tous les deux, c'est cool !
Cela dit, je m'y suis repanché depuis mon post, et je me suis trouvé sur ce topic :
https://forum.ubuntu-fr.org/viewtopic.p … 650241&p=2
Et là, comme ?? le dis, j'ai fait
bcdedit /set {bootmgr} path \EFI\ubuntu\shimx64.efi
En fait, j'ai fait shimx64 au lieu grubx64 car j'ai lu sur le topic que j'ai mis en lien qu'on pouvait également le faire.
Bon, toujours est il que cela marche désormais. Je peux choisir ubuntu et windows 8 apres l'utilisation de l'un comme de l'autre .
En ce moment, je fais les mises à jours windows, en lisant les liens que vous m'avez fourni, dois-je comprendre alors qu'après chaque mise à jour importante, je dois à nouveau rentrer la lgne de commande pour que le GRUB réapparaisse à nouveau ?? (en sachant que desormais, je ne vois pas de raison de remettre le mode secure à mon boot, ni même remettre l'amorcage rapide de windows)
@metalux : Si je peux m'abstenir de ta 2eme solution, je suis preneur. Comme tu le pressents, je suis déjà pas sûr de bien tout comprendre ce que je fais alors ^^
Dernière modification par hollowspy (Le 16/01/2018, à 14:52)
Hors ligne
#10 Le 16/01/2018, à 15:12
- metalux
Re : Besoin d'aide suite installation Ubuntu en dual boot :(
shimx64.efi correspond au démarrage du grub avec le secure boot activé. Celui-ci peut poser des soucis pour le chargement de certains modules comme le wifi par exemple qui demande à désactiver cette fonction. Si ton Pc n'a pas de problème avec le secure boot, tu peux garder le démarrage sur ce fichier avec le secure boot activé sinon il faut utiliser grubx64 avec le secure boot désactivé.
@metalux : Si je peux m'abstenir de ta 2eme solution, je suis preneur. Comme tu le pressents, je suis déjà pas sûr de bien tout comprendre ce que je fais alors ^^
La solution avec efibootmgr revient à priori au même qu'avec bcdedit sous windows, à la différence près que je maîtrise mieux Gnu/Linux que Windows, faisant des dual-boot pour les autres mais n'utilisant pas windows par moi-même, hormis dans le cadre professionnel.
Quand je l'avais fais, je n'ai pas eu à le refaire même après des mises à jour windows, à voir avec bcdedit si c'est la même chose.
ni même remettre l'amorcage rapide de windows
Comme c'était ma 1ère remarque, le démarrage rapide de Windows est en fait une sorte d'hibernation. Ceci empêche le démontage propre des partitions et t'empêche le démarrage avec Ubuntu, donc c'est indispensable de le désactiver. J'ai souvent eu des appels à la rescousse concernant Ubuntu qui ne démarrait plus et souvent c'était dû au démarrage rapide qui s'était réactivé lors d'une mise à jour windows. Si tu es confronté à ce cas, il y a généralement la réponse dans le message d'erreur faisant référence à windows si je m'en souviens. J'ai encore eu le cas récemment début janvier sur le PC de ma fille qui est en dual-boot.
Hors ligne
#11 Le 16/01/2018, à 15:19
- hollowspy
Re : Besoin d'aide suite installation Ubuntu en dual boot :(
Bon, du coup, jme remet à jour windows (vu qu'hier, je n'avais pas trouvé toute la doc), et une fois que cela sera à jour, alors, je peux refaire le code ?
bcdedit /set {bootmgr} path \EFI\ubuntu\grubx64.efi
J'imagine que ca me posera pas de pb et que cela va écraser shimx64 ? Je me trompe ?
Quand je pense que si j'avais vu cet doc (ou si j'avais bien cherché), j'avais juste une ligne de commande à faire et je n'aurais pas eu besoin de formater mon windows
Hors ligne
#12 Le 16/01/2018, à 16:19
- metalux
Re : Besoin d'aide suite installation Ubuntu en dual boot :(
Ne t'embête pas, ne change rien si ça fonctionne. D'ailleurs je me demande si shimx64 ne chaîne pas sur grubx64 si le secure boot est désactivé, il faudrait prendre le temps de le vérifier.
Si le secure boot pose problème pour ubuntu, tu le désactives. Si ça ne démarre pas sur le grub, tu le réactives alors juste pour démarrer sur windows et passer la commande qui va bien (bcdedit....grubx64.efi) puis extinction et à nouveau désactivation du secure boot.
Ça n'écrase pas shimx64, ça indique juste de démarrer sur grubx64 à la place.
Hors ligne
#13 Le 16/01/2018, à 22:29
- ??
Re : Besoin d'aide suite installation Ubuntu en dual boot :(
D'ailleurs je me demande si shimx64 ne chaîne pas sur grubx64 si le secure boot est désactivé, il faudrait prendre le temps de le vérifier.
.
Je te confirme que shimx64,efi, lorsqu'il a fini de causer avec le bios, lance le programme grubx64.efi que cela soit en mode sécurisé ou non. Tu en verras la démonstration si tu lis la documentation refind
( voir ma signature) tu constateras que refind en mode sécurisé se fait passer pour grubx64.efi,
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#14 Le 16/01/2018, à 23:58
- metalux
Re : Besoin d'aide suite installation Ubuntu en dual boot :(
Merci pour l'info.
Hors ligne
#15 Le 17/01/2018, à 11:54
- hollowspy
Re : Besoin d'aide suite installation Ubuntu en dual boot :(
Bonjour,
Je me permet de revenir ici,
Alors, j'ai fini de faire ma MAJ windows (j'avais pu telecharger qu'un ISO de windows8, mais je voulais revenir en 8.1). Et une fois windows mis à jour correctement, et bien surprise, plus d'accès à nouveau au GRUB. Donc retour à la case départ (du coup, jme suis payé un formatage de windows pour rien).
BRef, j'ai refait exactement les manips (lancer ubuntu en live cd, refaire un boot repair, lancer un terminal pour faire un : efibootmgr -v, et relancer windows et faire un bcdedit /set {bootmgr} path \EFI\ubuntu\shimx64.efi).
Et finalement, cela marche comme prévu.
SI seulement j'avais mieux lu la doc concernant les HP, je n'aurais pas perdu une journée.
Peu importe, vive les sauvegarde quand même et desormais, je peux lancer l'un ou l'autre. A moi désormais de découvrir l'environnement ubuntu qui m'est complètement inconnu jusque là
Merci à vous les gens qui avaient pris la peine de bien vouloir me répondre
Si, une dernière chose svp : Depuis que j'ai fait la première installation d'Ubuntu et un premier boot repair, dans mon GRUB, (cf image)liens_GRUB_image, alors que je n'ai touché à rien. Est ce normal d'avoir autant de choix, ou est ce pénalisant ? Puis-je laisser comme cela ? Merci de m'éclairer.
Cordialement
Dernière modification par hollowspy (Le 17/01/2018, à 12:04)
Hors ligne
#16 Le 17/01/2018, à 15:57
- ??
Re : Besoin d'aide suite installation Ubuntu en dual boot :(
Bonjour
Boot-repair t'a proposé le maxima de possibilités. Mais tu peux en avoir moins.
sudo chmod -x /etc/grub.d/25_custom
sudo update-grub
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#17 Le 18/01/2018, à 11:05
- hollowspy
Re : Besoin d'aide suite installation Ubuntu en dual boot :(
Ok, jte remercie.
Alors, si cela ne gène en rien, je vais quand même éviter d'y toucher, pas peur de faire une connerie. ca serait balo, maintenant que tout marche correctement
Merci pour vos aides
Hors ligne
#18 Le 18/01/2018, à 12:08
- ??
Re : Besoin d'aide suite installation Ubuntu en dual boot :(
Bonjour.
Ce sont des commandes sans danger et réversibles en remplaçant le signe moins par le signe plus.
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne