Pages : 1
#1 Le 07/02/2018, à 17:41
- ewfzapp
Probleme d'installation sur clé usb
Bonsoir à tous,
j'expose un problème que peut être d'autre pourraient rencontrer et pour lequel j'ai un peu de mal à trouver la solution.
Voila: Je viens d'acquérir un laptop Asus UX430, bien évidemment, avec windaube 10.
Comme à mon habitude j'installe Linux (ubuntu ou l'une des variantes) sur une clé USB pour pouvoir utiliser notre distribution préférée. Je parle bien d'installer, et pas de live USB! C'est à dire que j'utilise un vieux pc sans disque dur, je boot dessus avec un USB ubuntu puis je branche une clé USB vierge que j'utilise comme "disque dur" et sur laquelle j'installe donc mon Linux et le grub qui va avec. Cette clé, je peux ensuite l'utiliser sur mon laptop comme un disque dur normal. Cette fois ci j'ai acheté une clé USB de type C de 128 GO.
Voilà mon soucis. Alors que tout fonctionnait parfaitement avec mon UX305 professionnel, j'éprouve de grandes difficultés à démarrer sur mon nouveau PC avec ma nouvelle clé USB.
- Le bios a changé sur le nouveau laptop. C'est un truc ou la souris fonctionne. Néanmoins j'ai réussis à désactiver le sécure boot et à passer en bios legacy. J'ai fait ça car sinon, chaque fois que je voulais booter sur la clé USB, ça me dirigeait vers le bios.
- Malgré cela, impossible de démarrer sur ma satanée clé USB. Du coup je l'ai testé sur le UX305 (Ceux qui suivent encore, me diront que ce dernier n'a pas de port USB de type C, mais j'ai un adaptateur!) et là cela fonctionne.
- En désespoir de cause j'ai tenté l'installe sur ma clé USB C d'elementary OS, et pendant l'installe j'ai eu un avertissement qui me disait que le système avait repéré un autre OS de type UEFI, et que je pouvait l'annuler en faisant retour, ce que j'ai fait, et là le démarrage sur le UX430 a fonctionné.
J'en conclu donc, que ça doit fonctionner uniquement en mode legacy (d'aucun diront que c'est normal car j'ai désactivé l'uefi, mais je répondrais que sur mes précédentes installe sur cette même clé, au démarrage j’avais deux lignes dans lignes dans le "grub" de Windows: l'une uefi et l'autre non, et les deux ne fonctionnaient pas). J'en conclu aussi, que les distros Linux actuelles 64bits, ne fonctionnent qu'en uefi (?).
D’où ma question, si je voulait une ubuntu ou une mint non uefi, comment faire?
Voilà, merci d'avance à tous les insomniaques qui m’auraient lu jusqu'au bout, et qui auraient éventuellement un début de piste...
www.indigenecreations.fr
Hors ligne
#2 Le 07/02/2018, à 17:55
- Nasman
Re : Probleme d'installation sur clé usb
Je pense qu'il doit être possible d'installer ubuntu aussi bien en mode uefi qu'en mode bios sur clé usb mais sans doute au prix de bricolages avec le risque qu"une mise à jour de grub fiche la pagaille.
Après il faut être sur que les machines veuillent bien démarrer sur clé usb, soit en mode bios, soit en mode uefi (ce qui n'est pas forcément toujours possible).
J'ai testé une installation fonctionnelle selon les deux modes (en machine virtuelle) et ai fait des essais pour démarrer en mode bios avec chargement de core.img sur un autre média que celui de bootage.
En mode bios il y a chargement d'une partie de grub (présent dans le mbr du média de boot) puis chargement de core.img (dans le même média par défaut - mais on peut changer cela).
En mode uefi, le code du mbr est ignoré et il y a démarrage avec les fichiers .efi présents dans la partition efi.
PC fixe sous Bionic 64 bits et portable avec Focal 64 bits
En ligne
#3 Le 07/02/2018, à 18:20
- Babdu89
Re : Probleme d'installation sur clé usb
Bonjour.
@Nasman.
J'ai une clé de tests avec table de partition de type GPT. avec deux Os installés dessus.
Un Os en 64 bits installé en mode UEFI, puis passé en mode Bios_Legacy, réinstallation de Grub avec Boot-Repair depuis une session live Bios_Legacy. (/dev/sdb3)
Pour l'installation en mode UEFI, il y a une partition boot-efi (boot-esp). (/dev/sdb1)
Pour l'installation en mode Bios_Legacy, il y a une partition bios-grub (ou bios-boot). (/dev/sdb2)
Nasman a écrit;
mais sans doute au prix de bricolages avec le risque qu"une mise à jour de grub fiche la pagaille.
Lors des maj de grub...
Des séances de réinstallation de Grub dans les deux mode pour rétablir le boot avec Boot-Repair en session live, dans chaque mode respectif, font l'affaire..
Et un Os en 32 bits pour tester en dual boot. installé en /dev/sdb4
La partition bios-boot a servi aussi pour l'installation.
Cette clé fonctionne sur trois machines.
Un vielle machine en 32 bits, seul l'Os 32 bits en /sdb4 fonctionne.
Une machine Bios_Legacy (32/64 bits) uniquement. Les deux Os fonctionnent en mode Bios_Legacy.
Une machine UEFI/Bios_Legacy ;
En UEFI, l'Os en 64 bits en /dev/sdb3 fonctionne.
En Bios_Legacy. Les deux os fonctionnent.
http://paste.ubuntu.com/26536400/
Boot Info Script 8f991e4 + Boot-Repair extra info [Boot-Info 25oct2017]
============================= Boot Info Summary: ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos2)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk
---------------------------------------------------------------------------
=> Grub2 (v2.00) is installed in the MBR of /dev/sdb and looks at sector
34402304 of the same hard drive for core.img. core.img is at this location
and looks for (,gpt4)/boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_gpt biosdisk
---------------------------------------------------------------------------
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 7/2008: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.5 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/extlinux/extlinux.conf
/boot/grub/i386-pc/core.img
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /EFI/ubuntu/grub.cfg /EFI/Boot/bootx64.efi
/EFI/ubuntu/MokManager.efi /EFI/ubuntu/grubx64.efi
/EFI/ubuntu/shimx64.efi
sdb2: __________________________________________________________________________
File system: BIOS Boot partition
Boot sector type: Grub2's core.img
Boot sector info:
sdb3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sdb4: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 14.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/grub/i386-pc/core.img
sdb5: __________________________________________________________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 2,048 56,383,487 56,381,440 7 NTFS / exFAT / HPFS
/dev/sda2 56,383,488 234,440,703 178,057,216 83 Linux
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 63.2 GB, 63216549888 bytes
255 heads, 63 sectors/track, 7685 cylinders, total 123469824 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 123,469,823 123,469,823 ee GPT
GUID Partition Table detected.
Partition Attrs Start Sector End Sector # of Sectors System
/dev/sdb1 33,583,104 34,402,303 819,200 EFI System partition
/dev/sdb2 34,402,304 35,426,303 1,024,000 BIOS Boot partition
/dev/sdb3 35,426,304 79,447,788 44,021,485 Data partition (Linux)
/dev/sdb4 79,448,064 123,467,595 44,019,532 Data partition (Linux)
/dev/sdb5 2,048 33,583,103 33,581,056 Data partition (Windows/Linux)
Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 FA2AC6152AC5CF37 ntfs windows-7-del
/dev/sda2 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ext4 fusion-14._dell
/dev/sdb1 92C8-E043 vfat
/dev/sdb3 72a66c99-76c9-420b-b133-77d8811a67f5 ext4 xubuntu-efi
/dev/sdb4 26e86484-52db-4b3b-ae12-584dd21d8154 ext4
/dev/sdb5 0669-366B vfat test-multi
========================= "ls -l /dev/disk/by-id" output: ======================
total 0
lrwxrwxrwx 1 root root 9 Feb 7 17:02 ata-LDLC_07072217A2384 -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 7 17:02 ata-LDLC_07072217A2384-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Feb 7 07:29 ata-LDLC_07072217A2384-part2 -> ../../sda2
lrwxrwxrwx 1 root root 9 Feb 7 07:29 ata-TSSTcorp_DVD+_-RW_TS-U633J_R86X6GSZB05544 -> ../../sr0
lrwxrwxrwx 1 root root 9 Feb 7 17:02 usb-_USB_DISK_3.0_07103C4D8A154C54-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Feb 7 17:01 usb-_USB_DISK_3.0_07103C4D8A154C54-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Feb 7 17:01 usb-_USB_DISK_3.0_07103C4D8A154C54-0:0-part2 -> ../../sdb2
lrwxrwxrwx 1 root root 10 Feb 7 17:01 usb-_USB_DISK_3.0_07103C4D8A154C54-0:0-part3 -> ../../sdb3
lrwxrwxrwx 1 root root 10 Feb 7 17:01 usb-_USB_DISK_3.0_07103C4D8A154C54-0:0-part4 -> ../../sdb4
lrwxrwxrwx 1 root root 10 Feb 7 17:01 usb-_USB_DISK_3.0_07103C4D8A154C54-0:0-part5 -> ../../sdb5
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda2 / ext4 (rw,noatime,errors=remount-ro)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="${saved_entry}"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
else
search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=30
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux' --class hybryde --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
recordfail
savedefault
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
else
search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
fi
linux /boot/vmlinuz-3.13.0-141-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-141-generic
}
submenu 'Options avancées pour HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux' $menuentry_id_option 'gnulinux-advanced-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, avec Linux 3.13.0-141-generic' --class hybryde --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-141-generic-advanced-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
recordfail
savedefault
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
else
search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
fi
echo 'Chargement de Linux 3.13.0-141-generic…'
linux /boot/vmlinuz-3.13.0-141-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-141-generic
}
menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, with Linux 3.13.0-141-generic (recovery mode)' --class hybryde --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-141-generic-recovery-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
else
search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
fi
echo 'Chargement de Linux 3.13.0-141-generic…'
linux /boot/vmlinuz-3.13.0-141-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-141-generic
}
menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, avec Linux 3.13.0-139-generic' --class hybryde --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-139-generic-advanced-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
recordfail
savedefault
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
else
search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
fi
echo 'Chargement de Linux 3.13.0-139-generic…'
linux /boot/vmlinuz-3.13.0-139-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-139-generic
}
menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, with Linux 3.13.0-139-generic (recovery mode)' --class hybryde --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-139-generic-recovery-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c' {
recordfail
load_video
insmod gzio
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
else
search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
fi
echo 'Chargement de Linux 3.13.0-139-generic…'
linux /boot/vmlinuz-3.13.0-139-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-139-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
else
search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
else
search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-FA2AC6152AC5CF37' {
savedefault
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 FA2AC6152AC5CF37
else
search --no-floppy --fs-uuid --set=root FA2AC6152AC5CF37
fi
parttool ${root} hidden-
chainloader +1
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Iso Live ubuntu-budgie-17.04-desktop-i386.iso dans partition system" {
insmod part_msdos
insmod iso9660
search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
set isofile="/ubuntu-budgie-17.04-desktop-i386.iso"
loopback loop $isofile
#echo 'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo 'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}
menuentry "Iso Live ubuntu-budgie-17.04-desktop-i386.iso dans cle USB3-Emtec" {
insmod part_gpt
insmod iso9660
search --no-floppy --fs-uuid --set=root 0669-366B
set isofile="/ubuntu-budgie-17.04-desktop-i386.iso"
loopback loop $isofile
#echo 'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo 'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}
menuentry "Iso Live ubuntu-17.10-desktop-amd64.iso dans cle USB3-Emtec" {
insmod part_gpt
insmod iso9660
search --no-floppy --fs-uuid --set=root 0669-366B
set isofile="/ubuntu-17.10-desktop-amd64.iso"
loopback loop $isofile
#echo 'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz.efi boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo 'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# /
UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c / ext4 noatime,errors=remount-ro 0 1
--------------------------------------------------------------------------------
====================== sda2/boot/extlinux/extlinux.conf: =======================
--------------------------------------------------------------------------------
## /boot/extlinux/extlinux.conf
##
## IMPORTANT WARNING
##
## The configuration of this file is generated automatically.
## Do not edit this file manually, use: extlinux-update
default l0
prompt 1
timeout 50
include themes/debian/theme.cfg
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
69.561733246 = 74.691342336 boot/grub/grub.cfg 1
51.270828247 = 55.051632640 boot/grub/i386-pc/core.img 1
40.617771149 = 43.612999680 boot/vmlinuz-3.13.0-139-generic 1
43.320896149 = 46.515458048 boot/vmlinuz-3.13.0-141-generic 1
43.320896149 = 46.515458048 vmlinuz 1
40.617771149 = 43.612999680 vmlinuz.old 1
57.888774872 = 62.157598720 boot/initrd.img-3.13.0-139-generic 1
62.763782501 = 67.392098304 boot/initrd.img-3.13.0-141-generic 2
62.763782501 = 67.392098304 initrd.img 2
57.888774872 = 62.157598720 initrd.img.old 1
================= sda2: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
99.026473999 = 106.328866816 boot/extlinux/extlinux.conf 1
53.312107086 = 57.243439104 boot/extlinux/chain.c32 1
============== sda2: Version of COM32(R) files used by Syslinux: ===============
boot/extlinux/chain.c32 : COM32R module (v4.xx)
========================== sdb1/EFI/ubuntu/grub.cfg: ===========================
--------------------------------------------------------------------------------
search.fs_uuid 72a66c99-76c9-420b-b133-77d8811a67f5 root hd1,gpt3
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------
=========================== sdb3/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd2,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt3 --hint-efi=hd2,gpt3 --hint-baremetal=ahci2,gpt3 72a66c99-76c9-420b-b133-77d8811a67f5
else
search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-72a66c99-76c9-420b-b133-77d8811a67f5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd2,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt3 --hint-efi=hd2,gpt3 --hint-baremetal=ahci2,gpt3 72a66c99-76c9-420b-b133-77d8811a67f5
else
search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
fi
linux /boot/vmlinuz-3.13.0-117-generic.efi.signed root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-117-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-72a66c99-76c9-420b-b133-77d8811a67f5' {
menuentry 'Ubuntu, with Linux 3.13.0-117-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-117-generic-advanced-72a66c99-76c9-420b-b133-77d8811a67f5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd2,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt3 --hint-efi=hd2,gpt3 --hint-baremetal=ahci2,gpt3 72a66c99-76c9-420b-b133-77d8811a67f5
else
search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
fi
echo 'Loading Linux 3.13.0-117-generic ...'
linux /boot/vmlinuz-3.13.0-117-generic.efi.signed root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-117-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-117-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-117-generic-recovery-72a66c99-76c9-420b-b133-77d8811a67f5' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd2,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt3 --hint-efi=hd2,gpt3 --hint-baremetal=ahci2,gpt3 72a66c99-76c9-420b-b133-77d8811a67f5
else
search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
fi
echo 'Loading Linux 3.13.0-117-generic ...'
linux /boot/vmlinuz-3.13.0-117-generic.efi.signed root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-117-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-advanced-72a66c99-76c9-420b-b133-77d8811a67f5' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd2,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt3 --hint-efi=hd2,gpt3 --hint-baremetal=ahci2,gpt3 72a66c99-76c9-420b-b133-77d8811a67f5
else
search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
fi
echo 'Loading Linux 3.13.0-32-generic ...'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-recovery-72a66c99-76c9-420b-b133-77d8811a67f5' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd2,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt3 --hint-efi=hd2,gpt3 --hint-baremetal=ahci2,gpt3 72a66c99-76c9-420b-b133-77d8811a67f5
else
search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
fi
echo 'Loading Linux 3.13.0-32-generic ...'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.13.0-32-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/25_custom ###
menuentry "EFI/ubuntu/MokManager.efi" {
search --fs-uuid --no-floppy --set=root 92C8-E043
chainloader (${root})/EFI/ubuntu/MokManager.efi
}
### END /etc/grub.d/25_custom ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Ubuntu 14.04.5 LTS (14.04) (on /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-5fd212d2-52f8-4db7-9b9f-3bdda68eb53b' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
else
search --no-floppy --fs-uuid --set=root 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
fi
linux /boot/vmlinuz-3.13.0-119-generic root=UUID=5fd212d2-52f8-4db7-9b9f-3bdda68eb53b ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-119-generic
}
submenu 'Advanced options for Ubuntu 14.04.5 LTS (14.04) (on /dev/sda2)' $menuentry_id_option 'osprober-gnulinux-advanced-5fd212d2-52f8-4db7-9b9f-3bdda68eb53b' {
menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux (on /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-119-generic--5fd212d2-52f8-4db7-9b9f-3bdda68eb53b' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
else
search --no-floppy --fs-uuid --set=root 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
fi
linux /boot/vmlinuz-3.13.0-119-generic root=UUID=5fd212d2-52f8-4db7-9b9f-3bdda68eb53b ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-119-generic
}
menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, avec Linux 3.13.0-119-generic (on /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-119-generic--5fd212d2-52f8-4db7-9b9f-3bdda68eb53b' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
else
search --no-floppy --fs-uuid --set=root 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
fi
linux /boot/vmlinuz-3.13.0-119-generic root=UUID=5fd212d2-52f8-4db7-9b9f-3bdda68eb53b ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-119-generic
}
menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, with Linux 3.13.0-119-generic (recovery mode) (on /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-119-generic-root=UUID=5fd212d2-52f8-4db7-9b9f-3bdda68eb53b ro recovery nomodeset-5fd212d2-52f8-4db7-9b9f-3bdda68eb53b' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
else
search --no-floppy --fs-uuid --set=root 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
fi
linux /boot/vmlinuz-3.13.0-119-generic root=UUID=5fd212d2-52f8-4db7-9b9f-3bdda68eb53b ro recovery nomodeset
initrd /boot/initrd.img-3.13.0-119-generic
}
menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, avec Linux 3.13.0-117-generic (on /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-117-generic--5fd212d2-52f8-4db7-9b9f-3bdda68eb53b' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
else
search --no-floppy --fs-uuid --set=root 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
fi
linux /boot/vmlinuz-3.13.0-117-generic root=UUID=5fd212d2-52f8-4db7-9b9f-3bdda68eb53b ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-117-generic
}
menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, with Linux 3.13.0-117-generic (recovery mode) (on /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-117-generic-root=UUID=5fd212d2-52f8-4db7-9b9f-3bdda68eb53b ro recovery nomodeset-5fd212d2-52f8-4db7-9b9f-3bdda68eb53b' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
else
search --no-floppy --fs-uuid --set=root 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
fi
linux /boot/vmlinuz-3.13.0-117-generic root=UUID=5fd212d2-52f8-4db7-9b9f-3bdda68eb53b ro recovery nomodeset
initrd /boot/initrd.img-3.13.0-117-generic
}
}
menuentry 'Ubuntu 14.04.1 LTS (14.04) (on /dev/sdc4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-26e86484-52db-4b3b-ae12-584dd21d8154' {
insmod part_gpt
insmod ext2
set root='hd2,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt4 --hint-efi=hd2,gpt4 --hint-baremetal=ahci2,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=26e86484-52db-4b3b-ae12-584dd21d8154 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-32-generic
}
submenu 'Advanced options for Ubuntu 14.04.1 LTS (14.04) (on /dev/sdc4)' $menuentry_id_option 'osprober-gnulinux-advanced-26e86484-52db-4b3b-ae12-584dd21d8154' {
menuentry 'Ubuntu (on /dev/sdc4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-32-generic--26e86484-52db-4b3b-ae12-584dd21d8154' {
insmod part_gpt
insmod ext2
set root='hd2,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt4 --hint-efi=hd2,gpt4 --hint-baremetal=ahci2,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=26e86484-52db-4b3b-ae12-584dd21d8154 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-32-generic (on /dev/sdc4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-32-generic--26e86484-52db-4b3b-ae12-584dd21d8154' {
insmod part_gpt
insmod ext2
set root='hd2,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt4 --hint-efi=hd2,gpt4 --hint-baremetal=ahci2,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=26e86484-52db-4b3b-ae12-584dd21d8154 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode) (on /dev/sdc4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-32-generic-root=UUID=26e86484-52db-4b3b-ae12-584dd21d8154 ro recovery nomodeset-26e86484-52db-4b3b-ae12-584dd21d8154' {
insmod part_gpt
insmod ext2
set root='hd2,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt4 --hint-efi=hd2,gpt4 --hint-baremetal=ahci2,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=26e86484-52db-4b3b-ae12-584dd21d8154 ro recovery nomodeset
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-32-generic (sur /dev/sdb3) (on /dev/sdc4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-32-generic--26e86484-52db-4b3b-ae12-584dd21d8154' {
insmod part_gpt
insmod ext2
set root='hd2,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt4 --hint-efi=hd2,gpt4 --hint-baremetal=ahci2,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode) (sur /dev/sdb3) (on /dev/sdc4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-32-generic-root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro recovery nomodeset-26e86484-52db-4b3b-ae12-584dd21d8154' {
insmod part_gpt
insmod ext2
set root='hd2,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt4 --hint-efi=hd2,gpt4 --hint-baremetal=ahci2,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro recovery nomodeset
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu 14.04.1 LTS (14.04) (sur /dev/sdb4) (sur /dev/sdb3) (on /dev/sdc4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-32-generic--26e86484-52db-4b3b-ae12-584dd21d8154' {
insmod part_gpt
insmod ext2
set root='hd2,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt4 --hint-efi=hd2,gpt4 --hint-baremetal=ahci2,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=26e86484-52db-4b3b-ae12-584dd21d8154 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu (sur /dev/sdb4) (sur /dev/sdb3) (on /dev/sdc4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-32-generic--26e86484-52db-4b3b-ae12-584dd21d8154' {
insmod part_gpt
insmod ext2
set root='hd2,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt4 --hint-efi=hd2,gpt4 --hint-baremetal=ahci2,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=26e86484-52db-4b3b-ae12-584dd21d8154 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-32-generic (sur /dev/sdb4) (sur /dev/sdb3) (on /dev/sdc4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-32-generic--26e86484-52db-4b3b-ae12-584dd21d8154' {
insmod part_gpt
insmod ext2
set root='hd2,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt4 --hint-efi=hd2,gpt4 --hint-baremetal=ahci2,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=26e86484-52db-4b3b-ae12-584dd21d8154 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode) (sur /dev/sdb4) (sur /dev/sdb3) (on /dev/sdc4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-32-generic-root=UUID=26e86484-52db-4b3b-ae12-584dd21d8154 ro recovery nomodeset-26e86484-52db-4b3b-ae12-584dd21d8154' {
insmod part_gpt
insmod ext2
set root='hd2,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt4 --hint-efi=hd2,gpt4 --hint-baremetal=ahci2,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=26e86484-52db-4b3b-ae12-584dd21d8154 ro recovery nomodeset
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-32-generic (sur /dev/sdb3) (sur /dev/sdb4) (sur /dev/sdb3) (on /dev/sdc4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-32-generic--26e86484-52db-4b3b-ae12-584dd21d8154' {
insmod part_gpt
insmod ext2
set root='hd2,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt4 --hint-efi=hd2,gpt4 --hint-baremetal=ahci2,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode) (sur /dev/sdb3) (sur /dev/sdb4) (sur /dev/sdb3) (on /dev/sdc4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-32-generic-root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro recovery nomodeset-26e86484-52db-4b3b-ae12-584dd21d8154' {
insmod part_gpt
insmod ext2
set root='hd2,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt4 --hint-efi=hd2,gpt4 --hint-baremetal=ahci2,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro recovery nomodeset
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu 14.04.1 LTS (14.04) (sur /dev/sda4) (sur /dev/sdb3) (sur /dev/sdb4) (sur /dev/sdb3) (on /dev/sdc4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-32-generic--26e86484-52db-4b3b-ae12-584dd21d8154' {
insmod part_gpt
insmod ext2
set root='hd2,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt4 --hint-efi=hd2,gpt4 --hint-baremetal=ahci2,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=26e86484-52db-4b3b-ae12-584dd21d8154 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu (sur /dev/sda4) (sur /dev/sdb3) (sur /dev/sdb4) (sur /dev/sdb3) (on /dev/sdc4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-32-generic--26e86484-52db-4b3b-ae12-584dd21d8154' {
insmod part_gpt
insmod ext2
set root='hd2,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt4 --hint-efi=hd2,gpt4 --hint-baremetal=ahci2,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=26e86484-52db-4b3b-ae12-584dd21d8154 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-32-generic (sur /dev/sda4) (sur /dev/sdb3) (sur /dev/sdb4) (sur /dev/sdb3) (on /dev/sdc4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-32-generic--26e86484-52db-4b3b-ae12-584dd21d8154' {
insmod part_gpt
insmod ext2
set root='hd2,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt4 --hint-efi=hd2,gpt4 --hint-baremetal=ahci2,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=26e86484-52db-4b3b-ae12-584dd21d8154 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode) (sur /dev/sda4) (sur /dev/sdb3) (sur /dev/sdb4) (sur /dev/sdb3) (on /dev/sdc4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-32-generic-root=UUID=26e86484-52db-4b3b-ae12-584dd21d8154 ro recovery nomodeset-26e86484-52db-4b3b-ae12-584dd21d8154' {
insmod part_gpt
insmod ext2
set root='hd2,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt4 --hint-efi=hd2,gpt4 --hint-baremetal=ahci2,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=26e86484-52db-4b3b-ae12-584dd21d8154 ro recovery nomodeset
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, avec Linux 3.13.0-32-generic (sur /dev/sdb3) (sur /dev/sda4) (sur /dev/sdb3) (sur /dev/sdb4) (sur /dev/sdb3) (on /dev/sdc4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-32-generic--26e86484-52db-4b3b-ae12-584dd21d8154' {
insmod part_gpt
insmod ext2
set root='hd2,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt4 --hint-efi=hd2,gpt4 --hint-baremetal=ahci2,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode) (sur /dev/sdb3) (sur /dev/sda4) (sur /dev/sdb3) (sur /dev/sdb4) (sur /dev/sdb3) (on /dev/sdc4)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-32-generic-root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro recovery nomodeset-26e86484-52db-4b3b-ae12-584dd21d8154' {
insmod part_gpt
insmod ext2
set root='hd2,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd2,gpt4 --hint-efi=hd2,gpt4 --hint-baremetal=ahci2,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro recovery nomodeset
initrd /boot/initrd.img-3.13.0-32-generic
}
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Iso Live ubuntu-budgie-17.04-desktop-i386.iso dans cle USB3" {
insmod part_gpt
insmod iso9660
search --no-floppy --fs-uuid --set=root 0669-366B
set isofile="/ubuntu-budgie-17.04-desktop-i386.iso"
loopback loop $isofile
#echo 'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo 'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}
menuentry "Iso Live ubuntu-artful-desktop-amd64.iso dans cle USB3-Emtec" {
insmod part_gpt
insmod iso9660
search --no-floppy --fs-uuid --set=root 0669-366B
set isofile="/artful-desktop-amd64.iso"
loopback loop $isofile
#echo 'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz.efi boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo 'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb3/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb3 during installation
UUID=72a66c99-76c9-420b-b133-77d8811a67f5 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sdb1 during installation
#UUID=92C8-E043 /boot/efi vfat defaults 0 1
UUID=92C8-E043 /boot/efi vfat defaults 0 1
--------------------------------------------------------------------------------
=================== sdb3: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
19.033241272 = 20.436787200 boot/grub/grub.cfg 1
19.077713013 = 20.484538368 boot/vmlinuz-3.13.0-117-generic 2
19.308181763 = 20.732002304 boot/vmlinuz-3.13.0-117-generic.efi.signed 1
17.878444672 = 19.196833792 boot/vmlinuz-3.13.0-32-generic 2
17.878444672 = 19.196833792 vmlinuz 2
21.895526886 = 23.510142976 boot/initrd.img-3.13.0-117-generic 2
19.528972626 = 20.969074688 boot/initrd.img-3.13.0-32-generic 2
19.528972626 = 20.969074688 initrd.img 2
19.528972626 = 20.969074688 initrd.img.old 2
=========================== sdb4/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd1,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=-1
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-26e86484-52db-4b3b-ae12-584dd21d8154' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=26e86484-52db-4b3b-ae12-584dd21d8154 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-32-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-26e86484-52db-4b3b-ae12-584dd21d8154' {
menuentry 'Ubuntu, avec Linux 3.13.0-32-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-advanced-26e86484-52db-4b3b-ae12-584dd21d8154' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
echo 'Chargement de Linux 3.13.0-32-generic…'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=26e86484-52db-4b3b-ae12-584dd21d8154 ro quiet splash $vt_handoff
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.13.0-32-generic-recovery-26e86484-52db-4b3b-ae12-584dd21d8154' {
recordfail
load_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
echo 'Chargement de Linux 3.13.0-32-generic…'
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=26e86484-52db-4b3b-ae12-584dd21d8154 ro recovery nomodeset
echo 'Chargement du disque mémoire initial…'
initrd /boot/initrd.img-3.13.0-32-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
insmod part_gpt
insmod ext2
set root='hd1,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
knetbsd /boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
insmod part_gpt
insmod ext2
set root='hd1,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt4 --hint-efi=hd1,gpt4 --hint-baremetal=ahci1,gpt4 26e86484-52db-4b3b-ae12-584dd21d8154
else
search --no-floppy --fs-uuid --set=root 26e86484-52db-4b3b-ae12-584dd21d8154
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows 7 (loader) (sur /dev/sda1)' --class windows --class os $menuentry_id_option 'osprober-chain-FA2AC6152AC5CF37' {
insmod part_msdos
insmod ntfs
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 FA2AC6152AC5CF37
else
search --no-floppy --fs-uuid --set=root FA2AC6152AC5CF37
fi
parttool ${root} hidden-
chainloader +1
}
menuentry 'Ubuntu 14.04.5 LTS (14.04) (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-5fd212d2-52f8-4db7-9b9f-3bdda68eb53b' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
else
search --no-floppy --fs-uuid --set=root 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
fi
linux /boot/vmlinuz-3.13.0-137-generic root=UUID=5fd212d2-52f8-4db7-9b9f-3bdda68eb53b ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-137-generic
}
submenu 'Options avancées pour Ubuntu 14.04.5 LTS (14.04) (sur /dev/sda2)' $menuentry_id_option 'osprober-gnulinux-advanced-5fd212d2-52f8-4db7-9b9f-3bdda68eb53b' {
menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-137-generic--5fd212d2-52f8-4db7-9b9f-3bdda68eb53b' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
else
search --no-floppy --fs-uuid --set=root 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
fi
linux /boot/vmlinuz-3.13.0-137-generic root=UUID=5fd212d2-52f8-4db7-9b9f-3bdda68eb53b ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-137-generic
}
menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, avec Linux 3.13.0-137-generic (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-137-generic--5fd212d2-52f8-4db7-9b9f-3bdda68eb53b' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
else
search --no-floppy --fs-uuid --set=root 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
fi
linux /boot/vmlinuz-3.13.0-137-generic root=UUID=5fd212d2-52f8-4db7-9b9f-3bdda68eb53b ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-137-generic
}
menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, with Linux 3.13.0-137-generic (recovery mode) (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-137-generic-root=UUID=5fd212d2-52f8-4db7-9b9f-3bdda68eb53b ro recovery nomodeset-5fd212d2-52f8-4db7-9b9f-3bdda68eb53b' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
else
search --no-floppy --fs-uuid --set=root 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
fi
linux /boot/vmlinuz-3.13.0-137-generic root=UUID=5fd212d2-52f8-4db7-9b9f-3bdda68eb53b ro recovery nomodeset
initrd /boot/initrd.img-3.13.0-137-generic
}
menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, avec Linux 3.13.0-135-generic (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-135-generic--5fd212d2-52f8-4db7-9b9f-3bdda68eb53b' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
else
search --no-floppy --fs-uuid --set=root 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
fi
linux /boot/vmlinuz-3.13.0-135-generic root=UUID=5fd212d2-52f8-4db7-9b9f-3bdda68eb53b ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-135-generic
}
menuentry 'HYBRYDE FUSION 14.04_Dell-Latitude-E4310 GNU/Linux, with Linux 3.13.0-135-generic (recovery mode) (sur /dev/sda2)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-135-generic-root=UUID=5fd212d2-52f8-4db7-9b9f-3bdda68eb53b ro recovery nomodeset-5fd212d2-52f8-4db7-9b9f-3bdda68eb53b' {
insmod part_msdos
insmod ext2
set root='hd0,msdos2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos2 --hint-efi=hd0,msdos2 --hint-baremetal=ahci0,msdos2 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
else
search --no-floppy --fs-uuid --set=root 5fd212d2-52f8-4db7-9b9f-3bdda68eb53b
fi
linux /boot/vmlinuz-3.13.0-135-generic root=UUID=5fd212d2-52f8-4db7-9b9f-3bdda68eb53b ro recovery nomodeset
initrd /boot/initrd.img-3.13.0-135-generic
}
}
menuentry 'Ubuntu 14.04.1 LTS (14.04) (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-72a66c99-76c9-420b-b133-77d8811a67f5' {
insmod part_gpt
insmod ext2
set root='hd1,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3 72a66c99-76c9-420b-b133-77d8811a67f5
else
search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
fi
linux /boot/vmlinuz-3.13.0-117-generic.efi.signed root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-117-generic
}
submenu 'Options avancées pour Ubuntu 14.04.1 LTS (14.04) (sur /dev/sdb3)' $menuentry_id_option 'osprober-gnulinux-advanced-72a66c99-76c9-420b-b133-77d8811a67f5' {
menuentry 'Ubuntu (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-117-generic.efi.signed--72a66c99-76c9-420b-b133-77d8811a67f5' {
insmod part_gpt
insmod ext2
set root='hd1,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3 72a66c99-76c9-420b-b133-77d8811a67f5
else
search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
fi
linux /boot/vmlinuz-3.13.0-117-generic.efi.signed root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-117-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-117-generic (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-117-generic.efi.signed--72a66c99-76c9-420b-b133-77d8811a67f5' {
insmod part_gpt
insmod ext2
set root='hd1,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3 72a66c99-76c9-420b-b133-77d8811a67f5
else
search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
fi
linux /boot/vmlinuz-3.13.0-117-generic.efi.signed root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-117-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-117-generic (recovery mode) (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-117-generic.efi.signed-root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro recovery nomodeset-72a66c99-76c9-420b-b133-77d8811a67f5' {
insmod part_gpt
insmod ext2
set root='hd1,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3 72a66c99-76c9-420b-b133-77d8811a67f5
else
search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
fi
linux /boot/vmlinuz-3.13.0-117-generic.efi.signed root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro recovery nomodeset
initrd /boot/initrd.img-3.13.0-117-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-32-generic--72a66c99-76c9-420b-b133-77d8811a67f5' {
insmod part_gpt
insmod ext2
set root='hd1,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3 72a66c99-76c9-420b-b133-77d8811a67f5
else
search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.13.0-32-generic
}
menuentry 'Ubuntu, with Linux 3.13.0-32-generic (recovery mode) (sur /dev/sdb3)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-3.13.0-32-generic-root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro recovery nomodeset-72a66c99-76c9-420b-b133-77d8811a67f5' {
insmod part_gpt
insmod ext2
set root='hd1,gpt3'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt3 --hint-efi=hd1,gpt3 --hint-baremetal=ahci1,gpt3 72a66c99-76c9-420b-b133-77d8811a67f5
else
search --no-floppy --fs-uuid --set=root 72a66c99-76c9-420b-b133-77d8811a67f5
fi
linux /boot/vmlinuz-3.13.0-32-generic root=UUID=72a66c99-76c9-420b-b133-77d8811a67f5 ro recovery nomodeset
initrd /boot/initrd.img-3.13.0-32-generic
}
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
set timeout=10
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Iso Live ubuntu-budgie-17.04-desktop-i386.iso dans cle USB3" {
insmod part_gpt
insmod iso9660
search --no-floppy --fs-uuid --set=root 0669-366B
set isofile="/ubuntu-budgie-17.04-desktop-i386.iso"
loopback loop $isofile
#echo 'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo 'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb4/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb4 during installation
UUID=26e86484-52db-4b3b-ae12-584dd21d8154 / ext4 errors=remount-ro 0 1
--------------------------------------------------------------------------------
=================== sdb4: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
50.266742706 = 53.973504000 boot/grub/grub.cfg 1
50.068786621 = 53.760950272 boot/grub/i386-pc/core.img 1
38.903316498 = 41.772118016 boot/vmlinuz-3.13.0-32-generic 2
38.903316498 = 41.772118016 vmlinuz 2
39.634895325 = 42.557644800 boot/initrd.img-3.13.0-32-generic 2
39.634895325 = 42.557644800 initrd.img 2
=============================== StdErr Messages: ===============================
File descriptor 9 (/proc/24821/mounts) leaked on lvs invocation. Parent PID 5411: bash
File descriptor 63 (pipe:[398521]) leaked on lvs invocation. Parent PID 5411: bash
No volume groups found
ADDITIONAL INFORMATION :
=================== log of boot-info 20180207_1702 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
boot-info is executed in installed-session (Ubuntu 14.04.5 LTS, trusty, Ubuntu, i686)
CPU op-mode(s): 32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-3.13.0-141-generic root=UUID=041cfc74-96e1-4c0f-ad6f-61ae768a1a3c ro quiet splash vt.handoff=7
=================== os-prober:
/dev/sda2:L'OS actuellement utilisé - Ubuntu 14.04.5 LTS CurrentSession:linux
/dev/sda1:Windows 7 (loader):Windows:chain
/dev/sdb3:Ubuntu 14.04.1 LTS (14.04):Ubuntu:linux
/dev/sdb4:Ubuntu 14.04.1 LTS (14.04):Ubuntu1:linux
=================== blkid:
/dev/sda1: LABEL="windows-7-del" UUID="FA2AC6152AC5CF37" TYPE="ntfs"
/dev/sda2: LABEL="fusion-14._dell" UUID="041cfc74-96e1-4c0f-ad6f-61ae768a1a3c" TYPE="ext4"
/dev/sdb1: UUID="92C8-E043" TYPE="vfat"
/dev/sdb3: LABEL="xubuntu-efi" UUID="72a66c99-76c9-420b-b133-77d8811a67f5" TYPE="ext4"
/dev/sdb4: UUID="26e86484-52db-4b3b-ae12-584dd21d8154" TYPE="ext4"
/dev/sdb5: LABEL="test-multi" UUID="0669-366B" TYPE="vfat"
2 disks with OS, 4 OS : 3 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.
Attention : identifiant de table de partitions GPT (GUID) détecté sur « /dev/sdb ». L'utilitaire sfdisk ne prend pas GPT en charge. Utilisez GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== /etc/grub.d/ :
drwxr-xr-x 2 root root 4096 janv. 21 00:02 grub.d
total 80
-rwxr-xr-x 1 root root 9791 déc. 19 2015 00_header
-rwxr-xr-x 1 root root 6058 avril 10 2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 avril 11 2014 10_linux
-rwxr-xr-x 1 root root 10412 avril 11 2014 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 avril 11 2014 30_os-prober
-rwxr-xr-x 1 root root 1418 août 2 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 1782 janv. 21 00:02 40_custom
-rwxr-xr-x 1 root root 1782 janv. 21 00:01 40_custom~
-rwxr-xr-x 1 root root 216 avril 9 2013 41_custom
-rw-r--r-- 1 root root 483 avril 9 2013 README
=================== /etc/grub.d/40_custom :
menuentry "Iso Live ubuntu-budgie-17.04-desktop-i386.iso dans partition system" {
insmod part_msdos
insmod iso9660
search --no-floppy --fs-uuid --set=root 041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
set isofile="/ubuntu-budgie-17.04-desktop-i386.iso"
loopback loop $isofile
#echo 'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo 'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}
menuentry "Iso Live ubuntu-budgie-17.04-desktop-i386.iso dans cle USB3-Emtec" {
insmod part_gpt
insmod iso9660
search --no-floppy --fs-uuid --set=root 0669-366B
set isofile="/ubuntu-budgie-17.04-desktop-i386.iso"
loopback loop $isofile
#echo 'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo 'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}
menuentry "Iso Live ubuntu-17.10-desktop-amd64.iso dans cle USB3-Emtec" {
insmod part_gpt
insmod iso9660
search --no-floppy --fs-uuid --set=root 0669-366B
set isofile="/ubuntu-17.10-desktop-amd64.iso"
loopback loop $isofile
#echo 'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz.efi boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo 'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}
=================== /etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_SAVEDEFAULT="true"
GRUB_DEFAULT="saved"
#GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
#GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_DISTRIBUTOR=`echo -n HYBRYDE FUSION 14.04_Dell-Latitude-E4310`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
GRUB_BACKGROUND="/etc/remastersys/grub.jpg"
=================== sda2saved_entry=gnulinux-simple-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c/grub/grubenv :
saved_entry=gnulinux-simple-041cfc74-96e1-4c0f-ad6f-61ae768a1a3c
Presence of EFI/Boot file detected: /mnt/boot-sav/sdb1/EFI/Boot/bootx64.efi
=================== sdb3/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 oct. 30 22:09 grub.d
total 84
-rwxr-xr-x 1 root root 9791 août 2 2016 00_header
-rwxr-xr-x 1 root root 6058 mai 8 2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 mai 15 2014 10_linux
-rwxr-xr-x 1 root root 10412 mai 15 2014 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 170 oct. 30 22:09 25_custom
-rwxr-xr-x 1 root root 11692 mai 15 2014 30_os-prober
-rwxr-xr-x 1 root root 1418 août 2 2016 30_uefi-firmware
-rwxr-xr-x 1 root root 1224 sept. 14 18:27 40_custom
-rwxr-xr-x 1 root root 723 juil. 9 2017 40_custom~
-rwxr-xr-x 1 root root 216 mai 15 2014 41_custom
-rw-r--r-- 1 root root 483 mai 15 2014 README
=================== sdb3/etc/grub.d/40_custom :
menuentry "Iso Live ubuntu-budgie-17.04-desktop-i386.iso dans cle USB3" {
insmod part_gpt
insmod iso9660
search --no-floppy --fs-uuid --set=root 0669-366B
set isofile="/ubuntu-budgie-17.04-desktop-i386.iso"
loopback loop $isofile
#echo 'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo 'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}menuentry "Iso Live ubuntu-artful-desktop-amd64.iso dans cle USB3-Emtec" {
insmod part_gpt
insmod iso9660
search --no-floppy --fs-uuid --set=root 0669-366B
set isofile="/artful-desktop-amd64.iso"
loopback loop $isofile
#echo 'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz.efi boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo 'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}
=================== sdb3/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
/boot/efi detected in the fstab of sdb3: UUID=92C8-E043 (sdb1)
=================== sdb4/etc/grub.d/ :
drwxr-xr-x 2 root root 4096 juil. 13 2017 grub.d
total 80
-rwxr-xr-x 1 root root 9424 mai 15 2014 00_header
-rwxr-xr-x 1 root root 6058 mai 8 2014 05_debian_theme
-rwxr-xr-x 1 root root 11608 mai 15 2014 10_linux
-rwxr-xr-x 1 root root 10412 mai 15 2014 20_linux_xen
-rwxr-xr-x 1 root root 1992 mars 12 2014 20_memtest86+
-rwxr-xr-x 1 root root 11692 mai 15 2014 30_os-prober
-rwxr-xr-x 1 root root 1416 mai 15 2014 30_uefi-firmware
-rwxr-xr-x 1 root root 724 juil. 13 2017 40_custom
-rwxr-xr-x 1 root root 724 juil. 13 2017 40_custom~
-rwxr-xr-x 1 root root 216 mai 15 2014 41_custom
-rw-r--r-- 1 root root 483 mai 15 2014 README
=================== sdb4/etc/grub.d/40_custom :
menuentry "Iso Live ubuntu-budgie-17.04-desktop-i386.iso dans cle USB3" {
insmod part_gpt
insmod iso9660
search --no-floppy --fs-uuid --set=root 0669-366B
set isofile="/ubuntu-budgie-17.04-desktop-i386.iso"
loopback loop $isofile
#echo 'Chargement du noyau Linux ...'
linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=$isofile toram locale=fr_FR bootkbd=fr console-setup/layoutcode=fr noprompt noeject quiet splash --
#echo 'Chargement du disque mémoire initial ...'
initrd (loop)/casper/initrd.lz
}
=================== sdb4/etc/default/grub :
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"
# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
=================== UEFI/Legacy mode:
BIOS is EFI-compatible, but it is not setup in EFI-mode for this installed-session.
SecureBoot disabled.
=================== PARTITIONS & DISKS:
sda2 : sda, not-sepboot, grubenv-ng grub2, grub-pc grub-efi , update-grub, 32, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, notbiosboot, .
sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sda1.
sdb1 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sdb1.
sdb3 : sdb, not-sepboot, grubenv-ok grub2, signed grub-efi , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-has-goodEFI, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sdb3.
sdb4 : sdb, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 32, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sdb4.
sdb5 : sdb, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, notbiosboot, /mnt/boot-sav/sdb5.
sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sdb : GPT, BIOS_boot, has-correctEFI, usb-disk, not-mmc, has-os, 2048 sectors * 512 bytes
=================== parted -lm:
BYT;
/dev/sda:120GB:scsi:512:512:msdos:ATA LDLC;
1:1049kB:28.9GB:28.9GB:ntfs::boot;
2:28.9GB:120GB:91.2GB:ext4::;
Error: The backup GPT table is corrupt, but the primary appears OK, so that will be used.
BYT;
/dev/sdb:63.2GB:scsi:512:512:gpt: USB DISK 3.0;
5:1049kB:17.2GB:17.2GB:fat32::msftdata;
1:17.2GB:17.6GB:419MB:fat32::boot;
2:17.6GB:18.1GB:524MB:::bios_grub;
3:18.1GB:40.7GB:22.5GB:ext4::;
4:40.7GB:63.2GB:22.5GB:ext4::;
=================== lsblk:
KNAME TYPE FSTYPE SIZE LABEL
sda disk 111,8G
sda1 part ntfs 26,9G windows-7-del
sda2 part ext4 84,9G fusion-14._dell
sdb disk 58,9G
sdb1 part vfat 400M
sdb2 part 500M
sdb3 part ext4 21G xubuntu-efi
sdb4 part ext4 21G
sdb5 part vfat 16G test-multi
sr0 rom 1024M
KNAME ROTA RO RM STATE MOUNTPOINT
sda 0 0 0 running
sda1 0 0 0 /mnt/boot-sav/sda1
sda2 0 0 0 /
sdb 1 0 1 running
sdb1 1 0 1 /mnt/boot-sav/sdb1
sdb2 1 0 1
sdb3 1 0 1 /mnt/boot-sav/sdb3
sdb4 1 0 1 /mnt/boot-sav/sdb4
sdb5 1 0 1 /mnt/boot-sav/sdb5
sr0 1 0 1 running
=================== mount:
/dev/sda2 on / type ext4 (rw,noatime,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755)
none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880)
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755)
none on /sys/fs/pstore type pstore (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
systemd on /sys/fs/cgroup/systemd type cgroup (rw,noexec,nosuid,nodev,none,name=systemd)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=bernard)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sdb1 on /mnt/boot-sav/sdb1 type vfat (rw)
/dev/sdb3 on /mnt/boot-sav/sdb3 type ext4 (rw)
/dev/sdb4 on /mnt/boot-sav/sdb4 type ext4 (rw)
/dev/sdb5 on /mnt/boot-sav/sdb5 type vfat (rw)
=================== ls:
/sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sdb1 sdb2 sdb3 sdb4 sdb5 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered): agpgart autofs block bsg btrfs-control bus cdrom char console core cpu cpu_dma_latency cuse disk dri ecryptfs fb0 fd full fuse hidraw0 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sdb sdb1 sdb2 sdb3 sdb4 sdb5 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom v4l vboxdrv vboxdrvu vboxnetctl vboxusb vga_arbiter vhci vhost-net video0 watchdog watchdog0 zero
ls /dev/mapper: control
=================== hexdump -n512 -C /dev/sda1
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 00 00 80 00 80 00 fd 4f 5c 03 00 00 00 00 |.........O.....|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 37 cf c5 2a 15 c6 2a fa |........7..*..*.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
=================== hexdump -n512 -C /dev/sdb1
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 08 20 00 |.X.mkfs.fat... .|
00000010 02 00 00 00 00 f8 00 00 20 00 40 00 00 70 00 02 |........ .@..p..|
00000020 00 80 0c 00 1f 03 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 43 e0 c8 92 20 20 20 20 20 20 20 20 20 |..)C... |
00000050 20 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac | FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=================== hexdump -n512 -C /dev/sdb5
00000000 eb 58 90 6d 6b 66 73 2e 66 61 74 00 02 20 20 00 |.X.mkfs.fat.. .|
00000010 02 00 00 00 00 f8 00 00 20 00 40 00 00 08 00 00 |........ .@.....|
00000020 00 68 00 02 03 20 00 00 00 00 00 00 02 00 00 00 |.h... ..........|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 6b 36 69 06 74 65 73 74 2d 6d 75 6c 74 |..)k6i.test-mult|
00000050 69 20 46 41 54 33 32 20 20 20 0e 1f be 77 7c ac |i FAT32 ...w|.|
00000060 22 c0 74 0b 56 b4 0e bb 07 00 cd 10 5e eb f0 32 |".t.V.......^..2|
00000070 e4 cd 16 cd 19 eb fe 54 68 69 73 20 69 73 20 6e |.......This is n|
00000080 6f 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 64 69 |ot a bootable di|
00000090 73 6b 2e 20 20 50 6c 65 61 73 65 20 69 6e 73 65 |sk. Please inse|
000000a0 72 74 20 61 20 62 6f 6f 74 61 62 6c 65 20 66 6c |rt a bootable fl|
000000b0 6f 70 70 79 20 61 6e 64 0d 0a 70 72 65 73 73 20 |oppy and..press |
000000c0 61 6e 79 20 6b 65 79 20 74 6f 20 74 72 79 20 61 |any key to try a|
000000d0 67 61 69 6e 20 2e 2e 2e 20 0d 0a 00 00 00 00 00 |gain ... .......|
000000e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
=================== df -Th:
Filesystem Type Size Used Avail Use% Mounted on
udev devtmpfs 1.9G 12K 1.9G 1% /dev
tmpfs tmpfs 384M 1.3M 383M 1% /run
/dev/sda2 ext4 84G 26G 54G 33% /
none tmpfs 4.0K 0 4.0K 0% /sys/fs/cgroup
none tmpfs 5.0M 0 5.0M 0% /run/lock
none tmpfs 1.9G 22M 1.9G 2% /run/shm
none tmpfs 100M 28K 100M 1% /run/user
/dev/sda1 fuseblk 27G 22G 5.5G 80% /mnt/boot-sav/sda1
/dev/sdb1 vfat 400M 4.7M 395M 2% /mnt/boot-sav/sdb1
/dev/sdb3 ext4 21G 4.0G 16G 21% /mnt/boot-sav/sdb3
/dev/sdb4 ext4 21G 2.6G 17G 14% /mnt/boot-sav/sdb4
/dev/sdb5 vfat 17G 15G 1.2G 93% /mnt/boot-sav/sdb5
=================== fdisk -l:
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00040603
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 56383487 28190720 7 HPFS/NTFS/exFAT
/dev/sda2 56383488 234440703 89028608 83 Linux
Disk /dev/sdb: 63.2 GB, 63216549888 bytes
255 heads, 63 sectors/track, 7685 cylinders, total 123469824 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdb1 1 123469823 61734911+ ee GPT
User choice: Est-ce que sda (msdos) est un disque amovible ? no
=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda2 into the MBRs of all disks (except live-disks and removable disks without OS).
Grub-efi would not be selected by default because: no-win-efi
Additional repair would be performed: unhide-bootmenu-10s
=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le disque sda (msdos) !
Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 14.04.5 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)
=================== User settings
The settings chosen by the user will not act on the boot.
Nota;
Au sujet du fonctionnement sur les trois machine différentes. J'utilise les drivers libre...
Ce qui permet le fonctionnement, sans passer d'options au noyau.
@+. Babdu89 .
Dernière modification par Babdu89 (Le 07/02/2018, à 18:45)
J'ai découvert Ubuntu avec la 07.10.... Et alors?!... Depuis je regarde de temps en temps si Windows marche toujours....
Hors ligne
#4 Le 07/02/2018, à 18:22
- ??
Re : Probleme d'installation sur clé usb
Bonjour
Je n'arrive pas trop à suivre ton problème. Mais J'ai compris que ton micro nouveau ne boote pas lorsque tu es positionné en LEGACY. Ce qui me semble normal car tu as installé une version EFI qui a volontairement supprimé la structure LEGACY.
Qu'il ne boote pas lorsque tu es positionné en EFI. Ce qui me semble normal car tu as installé une version EFI qui a volontairement créé une structure de boot /EFI/ubuntu prévue pour un disque dur.
Il faut se rappeler que la norme de boot prévue pour un support externe indépendant est /EFI/BOOT et que le fichier de boot standard s'appelle BOOTX64.EFI et pas GRUBX64.efI
Je pense que tu as compris que tu dois dupliquer /EFI/ubuntu/* dans /EFI/BOOT et renommer un fichier.
Pour plus de détails https://doc.ubuntu-fr.org/tutoriel/inst … disque_usb
Dernière modification par ?? (Le 07/02/2018, à 18:27)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#5 Le 11/02/2018, à 19:28
- ewfzapp
Re : Probleme d'installation sur clé usb
Bonsoir à tous et merci pour vos réponses.
A force de bricoler mon bios j'ai trouvé le bon paramétrage. tout fonctionne a merveille.
Pour ??---> J'installe linux sur une clé usb, a partir d'un pc sans disque dure pour éviter d'avoir un paramétrage problématique de grub.
J'ai donc une vraie installation de linux sur ma clé usb 128go comme s'y c'était un disque dur. Cela me permet de booter sur n'importe quel PC avec une clé qui ne soit pas live, mais avec mes applis et mes paramètres...
Vu que j'ai un nas synology, j'ai accès a tous mes fichiers tranquille....
Merci à tous pour vos réponses.
Bonne soirée
www.indigenecreations.fr
Hors ligne
#6 Le 11/02/2018, à 23:21
- aventura
Re : Probleme d'installation sur clé usb
Bonsoir,
Je suis nouveau sur ce forum, et je débute avec linux, que je découvre un peu plus tous les jours.
J'essaye en ce moment de créer une clé usb bootable avec un dvd win7, suivant la méthode 4 dans le chapitre .
je suis au stade gérer le drapeau, je ne peut pas sélectionner pas en surbrillance.
Si vous avez une réponse, je suis preneur.
A bientôt.
hp m9065 pavillon amd athlon 64x2 dual core 6000+x2. mémoire 2.9gio ,carte nv86, disque 311 gio,nVidia geforce 8500 gt.
Hors ligne
#7 Le 12/02/2018, à 00:36
- ??
Re : Probleme d'installation sur clé usb
Bonsoir,
J'essaye en ce moment de créer une clé usb bootable avec un dvd win7, suivant la méthode 4 dans le chapitre .
A bientôt.
Bonsoir.
Soit plus précis.
Dernière modification par ?? (Le 12/02/2018, à 00:36)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
Pages : 1