#26 Le 11/02/2018, à 16:56
- zlotz
Re : Le redémarrage post-installation ne donne rien
Je n'ai pas les fichiers que tu évoques dans /mnt/var/log :
ubuntu@ubuntu:~$ tail -50 /mnt/var/log/syslog
tail: impossible d'ouvrir '/mnt/var/log/syslog' en lecture: Aucun fichier ou dossier de ce type
ubuntu@ubuntu:~$ cd /mnt
ubuntu@ubuntu:/mnt$ cd var
ubuntu@ubuntu:/mnt/var$ cd log
ubuntu@ubuntu:/mnt/var/log$ ls
alternatives.log btmp faillog lastlog wtmp
apt cups fontconfig.log lightdm
boot-info dist-upgrade fsck speech-dispatcher
boot-repair dmesg hp unattended-upgrades
bootstrap.log dpkg.log installer upstart
Hors ligne
#27 Le 11/02/2018, à 17:58
- ??
Re : Le redémarrage post-installation ne donne rien
tail -150 /mnt/var/log/dmsg
Dernière modification par ?? (Le 11/02/2018, à 17:59)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#28 Le 11/02/2018, à 18:24
- malbo
Re : Le redémarrage post-installation ne donne rien
La commande correcte est :
tail -150 /mnt/var/log/dmesg
Mais elle doit donner seulement ça :
(Nothing has been logged yet.)
Parce que ce fichier dmesg ne contient que cette ligne.
Dernière modification par malbo (Le 11/02/2018, à 18:29)
Hors ligne
#29 Le 11/02/2018, à 18:39
- zlotz
Re : Le redémarrage post-installation ne donne rien
@ malbo :
Oui, effectivement.
Hors ligne
#30 Le 11/02/2018, à 18:53
- ??
Re : Le redémarrage post-installation ne donne rien
Donnes le contenu de
head -200 /mnt/boot/grub/grub.cfg
Merci Malbo pour la correction du nom
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#31 Le 11/02/2018, à 23:39
- zlotz
Re : Le redémarrage post-installation ne donne rien
Voilà :
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 475c8bd3-ab3c-4962-93a3-ac91a40d57d2
else
search --no-floppy --fs-uuid --set=root 475c8bd3-ab3c-4962-93a3-ac91a40d57d2
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=fr_FR
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
set timeout=10
else
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=10
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=10
fi
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-475c8bd3-ab3c-4962-93a3-ac91a40d57d2' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 475c8bd3-ab3c-4962-93a3-ac91a40d57d2
else
search --no-floppy --fs-uuid --set=root 475c8bd3-ab3c-4962-93a3-ac91a40d57d2
fi
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=475c8bd3-ab3c-4962-93a3-ac91a40d57d2 ro quiet splash nomodeset acpi=off noapic $vt_handoff
initrd /boot/initrd.img-4.4.0-31-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-475c8bd3-ab3c-4962-93a3-ac91a40d57d2' {
menuentry 'Ubuntu, with Linux 4.4.0-31-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-advanced-475c8bd3-ab3c-4962-93a3-ac91a40d57d2' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 475c8bd3-ab3c-4962-93a3-ac91a40d57d2
else
search --no-floppy --fs-uuid --set=root 475c8bd3-ab3c-4962-93a3-ac91a40d57d2
fi
echo 'Loading Linux 4.4.0-31-generic ...'
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=475c8bd3-ab3c-4962-93a3-ac91a40d57d2 ro quiet splash nomodeset acpi=off noapic $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-31-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-31-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-init-upstart-475c8bd3-ab3c-4962-93a3-ac91a40d57d2' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 475c8bd3-ab3c-4962-93a3-ac91a40d57d2
else
search --no-floppy --fs-uuid --set=root 475c8bd3-ab3c-4962-93a3-ac91a40d57d2
fi
echo 'Loading Linux 4.4.0-31-generic ...'
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=475c8bd3-ab3c-4962-93a3-ac91a40d57d2 ro quiet splash nomodeset acpi=off noapic $vt_handoff init=/sbin/upstart
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-31-generic
}
menuentry 'Ubuntu, with Linux 4.4.0-31-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-31-generic-recovery-475c8bd3-ab3c-4962-93a3-ac91a40d57d2' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 475c8bd3-ab3c-4962-93a3-ac91a40d57d2
else
Dernière modification par zlotz (Le 11/02/2018, à 23:42)
Hors ligne
#32 Le 12/02/2018, à 00:18
- ??
Re : Le redémarrage post-installation ne donne rien
Voilà :
...... linux /boot/vmlinuz-4.4.0-31-generic root=UUID=475c8bd3-ab3c-4962-93a3-ac91a40d57d2 ro quiet splash nomodeset acpi=off noapic $vt_handoff initrd /boot/initrd.img-4.4...........
Les options de boot sont bien positionnées,
L'absence des fichiers de trace ( syslog et kern.log ) devrait être une piste que je ne sais comprendre.
En tout cas c'est avant la gestion de l'écran,
Peux-tu réaccéder à ce fichier, accéder à la ligne suivante:
linux /boot/vmlinuz-4.4.0-31-generic root=UUID=475c8bd3-ab3c-4962-93a3-ac91a40d57d2 ro quiet splash nomodeset acpi=off noapic $vt_handoff
supprimer les deux mots quiet splash sauver et rebooter.
Espérons que ce qu'il dira à l'écran ouvrira une piste...
Dernière modification par ?? (Le 12/02/2018, à 00:27)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#33 Le 12/02/2018, à 01:05
- zlotz
Re : Le redémarrage post-installation ne donne rien
J'ai essayé avec vi, le fichier est en read-only.
D'ailleurs, il commence par :
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
Dois-je aller fouiller dans ces templates et ces settings ?
Hors ligne
#34 Le 12/02/2018, à 11:00
- ??
Re : Le redémarrage post-installation ne donne rien
Bonjour
Si tu as booté avec le support d'installation et monté la partition sur /mnt ( https://forum.ubuntu-fr.org/viewtopic.p … #p21869404 ) je suis surpris que le fichier soit en read only.
Si tel est le cas, on a un début de ste expliquant pourquoi cela n'a pas écrit dans le répertoire /var/log
Tu aurais des éditeurs du style gedit ou nano plus accessibles que vi.
Dans le fichier, il y a des commentaires disant que cette modification ne restera pas éternellement gardée. Mais ne t'inquiétes pas, lorsqu'on aura trouvé ce qui cloche, on rectifiera de façon définive...
Il serait bon que tu donnes l'état du disque paragraphe 1 et 3.1 de smartctl https://doc.ubuntu-fr.org/smartmontools
Dernière modification par ?? (Le 12/02/2018, à 11:09)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#35 Le 12/02/2018, à 21:57
- zlotz
Re : Le redémarrage post-installation ne donne rien
Ça semble vraiment en read-only :
ubuntu@ubuntu:~$ sudo mount -v /dev/sda1 /mnt
mount: /dev/sda1 mounted on /mnt.
ubuntu@ubuntu:~$ cd /mnt/boot/grub
ubuntu@ubuntu:/mnt/boot/grub$ ls -l
total 2384
drwxr-xr-x 2 root root 4096 Feb 7 22:33 fonts
-rw-r--r-- 1 root root 712 Jul 19 2016 gfxblacklist.txt
-r--r--r-- 1 root root 8479 Feb 10 11:19 grub.cfg
-rw-rw-r-- 1 root root 1024 Feb 7 22:33 grubenv
drwxr-xr-x 2 root root 12288 Feb 10 11:19 i386-pc
drwxr-xr-x 2 root root 4096 Feb 10 11:19 locale
-rw-r--r-- 1 root root 2398585 Jul 19 2016 unicode.pf2
Je peux ouvrir le fichier avec gedit, le rectifier, mais pas le sauver.
Voilà le résultat du smartctl (j'ai mis aussi la log de l'installation de smartmontools car une erreur est reportée ; je ne sais pas si ça peut avoir un rapport mais j'ai dû m'y reprendre à plusieurs fois) :
ubuntu@ubuntu:~$ sudo apt-get install smartmontools
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
bsd-mailx liblockfile-bin liblockfile1 postfix
Suggested packages:
procmail postfix-mysql postfix-pgsql postfix-ldap postfix-pcre sasl2-bin
dovecot-common postfix-cdb postfix-doc gsmartcontrol smart-notifier
The following NEW packages will be installed:
bsd-mailx liblockfile-bin liblockfile1 postfix smartmontools
0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/1,677 kB of archives.
After this operation, 5,683 kB of additional disk space will be used.
Do you want to continue? [Y/n] Y
debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable
Selecting previously unselected package liblockfile-bin.
(Reading database ... 191931 files and directories currently installed.)
Preparing to unpack .../liblockfile-bin_1.09-6ubuntu1_amd64.deb ...
Unpacking liblockfile-bin (1.09-6ubuntu1) ...
Selecting previously unselected package liblockfile1:amd64.
Preparing to unpack .../liblockfile1_1.09-6ubuntu1_amd64.deb ...
Unpacking liblockfile1:amd64 (1.09-6ubuntu1) ...
Selecting previously unselected package postfix.
Preparing to unpack .../postfix_3.1.0-3_amd64.deb ...
debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable
dpkg: error processing archive /var/cache/apt/archives/postfix_3.1.0-3_amd64.deb (--unpack):
subprocess new pre-installation script returned error exit status 1
Selecting previously unselected package bsd-mailx.
Preparing to unpack .../bsd-mailx_8.1.2-0.20160123cvs-2_amd64.deb ...
Unpacking bsd-mailx (8.1.2-0.20160123cvs-2) ...
Selecting previously unselected package smartmontools.
Preparing to unpack .../smartmontools_6.4+svn4214-1_amd64.deb ...
Unpacking smartmontools (6.4+svn4214-1) ...
Processing triggers for man-db (2.7.5-1) ...
Processing triggers for libc-bin (2.23-0ubuntu3) ...
Processing triggers for systemd (229-4ubuntu7) ...
Processing triggers for ureadahead (0.100.0-19) ...
Errors were encountered while processing:
/var/cache/apt/archives/postfix_3.1.0-3_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
ubuntu@ubuntu:~$ sudo smartctl -s on -a /dev/sda
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-31-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.14 (AF)
Device Model: ST1000DM003-1CH162
Serial Number: Z1D2ZJXC
LU WWN Device Id: 5 000c50 04f5b8530
Firmware Version: CC44
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Feb 12 19:55:09 2018 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 575) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 108) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 115 099 006 Pre-fail Always - 94936744
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1645
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always - 208233823
9 Power_On_Hours 0x0032 081 081 000 Old_age Always - 16925
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always - 1648
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 072 058 045 Old_age Always - 28 (Min/Max 17/28)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 215
193 Load_Cycle_Count 0x0032 040 040 000 Old_age Always - 121204
194 Temperature_Celsius 0x0022 028 042 000 Old_age Always - 28 (0 11 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 15345h+19m+40.355s
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 18327714115
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 19443065392
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Dernière modification par zlotz (Le 12/02/2018, à 21:59)
Hors ligne
#36 Le 13/02/2018, à 01:16
- ??
Re : Le redémarrage post-installation ne donne rien
et si tu fais
sudo gedit /mnt/boot/grub/grub.cfg
NOTA: Le disque dur n'a pas de problème inquiètant.
Un peu d'usure. Spécialement le compteur 193
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail Always - 208233823
9 Power_On_Hours 0x0032 081 081 000 Old_age Always - 16925
193 Load_Cycle_Count 0x0032 040 040 000 Old_age Always - 121204
Dernière modification par ?? (Le 13/02/2018, à 01:21)
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#37 Le 13/02/2018, à 01:36
- zlotz
Re : Le redémarrage post-installation ne donne rien
J'obtiens les warnings suivantes :
ubuntu@ubuntu:~$ sudo gedit /mnt/boot/grub/grub.cfg
(gedit:9465): Gtk-WARNING **: Calling Inhibit failed: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files
** (gedit:9465): WARNING **: Set document metadata failed: Setting attribute metadata::gedit-spell-enabled not supported
** (gedit:9465): WARNING **: Set document metadata failed: Setting attribute metadata::gedit-encoding not supported
Après avoir fermé puis réouvert le fichier, il semble que je l'ai modifié.
J'essaie de redémarrer, mais rien ne change.
Dernière modification par zlotz (Le 13/02/2018, à 01:44)
Hors ligne
#38 Le 13/02/2018, à 02:02
- ??
Re : Le redémarrage post-installation ne donne rien
As-tu quelques lignes qui s'écrivent sur l'écran ou est-il désespérement noir?
Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.
Hors ligne
#39 Le 13/02/2018, à 13:00
- zlotz
Re : Le redémarrage post-installation ne donne rien
J'ai le menu suivant :
- Ubuntu
- Advanced options for Ubuntu
- Memory test (...des trucs...)
- Memory test (...des trucs...)
Puis, si je choisis Ubuntu (ou si j'attends), j'ai un écran noir avec seulement un curseur clignotant en haut à gauche.
Hors ligne