Pages : 1
#1 Le 17/02/2018, à 15:44
- ub821
Fonctionnement HP 8200
Bonjour à Toutes et Tous 
J'ai acquis en fin d'année dernière, un HP 8200 Elite (SFF) Intel i7-2600 3,4GHz, et je souhaiterai savoir si je peux améliorer, ou pas... son fonctionnement.
En tout premier, lorsque l'ordi est éteint, après avoir appuyer sur le bouton "marche", il met environ 5 secondes avant de lancer l'OS...
Est-ce normal, anormal... ?
Si non, comment puis-je remédier à cela ?
Merci de vos retours d'expériences sur ce matériel 
j'ai tenté la question sur un forum hp, et... 
aussi, vous me voyez...
après, je vous poserai des questions sur l'efi et le démarrage de l'OS...
Cordialement
Cordialement
Bernard
Debian 10.0 / HP-8200SFF, Intel I7-2600, 3.4GHz, Ram 16Go, SSD 1To
Le Blog des bonnes questions à se poser, et comment se les poser...
Hors ligne
#2 Le 17/02/2018, à 21:41
- ares
Re : Fonctionnement HP 8200
Bonjour,
Merci de préciser la version d'Ubuntu : Ubuntu, Kubuntu, Xubuntu, Lubuntu, etc
Dual boot ?
@+
Le droit d'emmerder Dieu (Richard Malka)
Hors ligne
#3 Le 17/02/2018, à 22:07
- Korak
Re : Fonctionnement HP 8200
Bonjour,
Regarde dans le BIOS s'il n'y a pas un délai de 5 secondes pour avoir le temps d’appuyer sur une touche (Esc ou touche de fonction par exemple) pour aller dans le BIOS, choisir le périphérique de démarrage ou autre.
Si c'est ça, réduit le délai à ta convenance et sans te bloquer (une seconde, c'est vite passé).
OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur. Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !
Hors ligne
#4 Le 18/02/2018, à 00:17
- ub821
Re : Fonctionnement HP 8200
Korak a écrit :
Bonjour,
Regarde dans le BIOS s'il n'y a pas un délai de 5 secondes pour avoir le temps d’appuyer sur une touche (Esc ou touche de fonction par exemple) pour aller dans le BIOS, choisir le périphérique de démarrage ou autre.
Si c'est ça, réduit le délai à ta convenance et sans te bloquer (une seconde, c'est vite passé).
Merci pour ton retour
J'ai le "watchdog" qui était à 5s et que je viens de désactiver !
mais, je pense que je me suis mal exprimé... le délai de 5 secondes, c'est entre le moment où, j'appuie sur le bouton marche, et le moment où l'ordi démarre son cycle, avec l'OS, (qui est debian 9 Stretch, réponse à @ares, qui n'a pas lu ma signature... ) où j'ai, là aussi un temps pour appuyer sur une touche pour entrer dans le bios !
si j'arrivais à comprendre ce laps de temps, que même sur le forum HP, ils n'ont pas compris... je passerai à une autre question...
Merci pour vos retours
Cordialement
Bernard
Debian 10.0 / HP-8200SFF, Intel I7-2600, 3.4GHz, Ram 16Go, SSD 1To
Le Blog des bonnes questions à se poser, et comment se les poser...
Hors ligne
#5 Le 18/02/2018, à 00:42
- Korak
Re : Fonctionnement HP 8200
Pour le premier temps d'attente, je ne pense pas que tu saches y faire quelque chose (mais je peux me tromper aussi).
Pour le deuxième temps d'attente, regarde dans le BIOS si le délai est modifiable.
En espérant avoir bien compris ta question.
OS: Ubuntu 22.04 64 bits + Windows 11 64 bits en dualboot (BIOS UEFI, Secure Boot activé et table de partitions GPT)
PC portable HP 17-CP0308NF Processeur: AMD Ryzen 7 5700U avec carte graphique AMD Lucienne intégrée au processeur. Mémoire vive: 16 Go RAM
Quand vous ne trouvez pas la solution à un problème, cherchez des pistes menant à la solution !
Hors ligne
#6 Le 18/02/2018, à 09:12
- ub821
Re : Fonctionnement HP 8200
Korak a écrit :
Pour le premier temps d'attente, je ne pense pas que tu saches y faire quelque chose (mais je peux me tromper aussi).
Pour le deuxième temps d'attente, regarde dans le BIOS si le délai est modifiable.
En espérant avoir bien compris ta question.
Il se peut, que tu aies raison pour le premier temps d'attente, qui parait être comme une minuterie, car c'est régulier comme temps...
pour le second temps, je pense que c'est lié, peut-être... à l'efi, qui est pour mon ordi, galère à régler, car l'ordi a des difficultés à reconnaître les 2 derniers disques durs, pourtant déclarés dans fstab...
peut-être que j'en ai de trop, en externe...
car, j'en ai 4 de déclaré, et ils sont tous déclarés de la même façon,
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=640106ae-b108-485a-bb56-4184c850b1a8 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=1731-FFE7 /boot/efi vfat umask=0077 0 1
# swap was on /dev/sda3 during installation
#UUID=877dce4f-f4e5-4f7f-a592-701e0809c7ef none swap sw 0 0
/dev/sr0 /media/cdrom0 udf,iso9660 user,noauto 0 0
#
#DD sauv500Go-nonSSHD
UUID=abb8f46f-635d-42c9-b4ed-1cc35d746db4 /media/user/Sauv500Go ext4 defaults 0 2
#
#DD Sauv1To-a
UUID=4fd569cd-a75a-4c3e-aeb3-a4ea32795ff5 /media/user/Sauv1To-a ext4 defaults 0 2
#
#DD SShD500
UUID=9767c92c-842d-467b-ab80-e5d797231d74 /media/user/SShD500 ext4 defaults 0 2
#
#DD SSD32Go
UUID=d9a247e1-e6d1-49bb-be11-1ce43fd73ec0 /media/user/SSD32Go ext4 defaults 0 2
#mais se sont les 2 derniers qui "causent" problème... ???
or, je les utilise pour mes sauvegardes, ils me sont donc utiles, tous les 4 !
merci pour vos retours
Cordialement
Bernard
Debian 10.0 / HP-8200SFF, Intel I7-2600, 3.4GHz, Ram 16Go, SSD 1To
Le Blog des bonnes questions à se poser, et comment se les poser...
Hors ligne
#7 Le 20/02/2018, à 14:51
- ub821
Re : Fonctionnement HP 8200
Pour éclairer celles ou ceux qui souhaitent mieux comprendre ce qui se passe au lancement de l'OS, voici la journalctl :
-- Logs begin at Tue 2018-02-20 13:37:12 CET, end at Tue 2018-02-20 13:38:18 CET. --
févr. 20 13:37:12 debian-fixe kernel: tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
févr. 20 13:37:12 debian-fixe kernel: tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
févr. 20 13:37:12 debian-fixe kernel: sd 8:0:0:0: [sdd] No Caching mode page found
févr. 20 13:37:12 debian-fixe kernel: sd 8:0:0:0: [sdd] Assuming drive cache: write through
févr. 20 13:37:12 debian-fixe kernel: sd 9:0:0:0: [sde] No Caching mode page found
févr. 20 13:37:12 debian-fixe kernel: sd 9:0:0:0: [sde] Assuming drive cache: write through
févr. 20 13:37:12 debian-fixe kernel: kvm: disabled by bios
févr. 20 13:37:13 debian-fixe avahi-daemon[741]: chroot.c: open() failed: No such file or directory
févr. 20 13:37:13 debian-fixe smartd[736]: Device: /dev/sdd [SAT], no ATA CHECK POWER STATUS support, ignoring -n Directive
févr. 20 13:37:17 debian-fixe colord-sane[862]: io/hpmud/pp.c 627: unable to read device-id ret=-1
févr. 20 13:37:41 debian-fixe pulseaudio[1085]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
Merci d'avance, si vous comprenez ce qui se passe, de partager votre expérience
Dernière modification par ub821 (Le 20/02/2018, à 14:52)
Cordialement
Bernard
Debian 10.0 / HP-8200SFF, Intel I7-2600, 3.4GHz, Ram 16Go, SSD 1To
Le Blog des bonnes questions à se poser, et comment se les poser...
Hors ligne
#8 Le 20/02/2018, à 15:07
- LeJediGris
Re : Fonctionnement HP 8200
Salut,
Et le retour d'un dmesg par exemple ?
A+
%NOINDEX%
Matos Asus Zenbook
"Home Made" Monstro: core i7 9700+32Go de mémoire+SSD QVO Samsung 1To +MoBo Asus Prime Z390P
+ "Terminator", core i5 3570, 16Go, SSD Intel 520 sous Mint 19.3, Freebox Revolution
Hors ligne
#9 Le 20/02/2018, à 15:36
- ub821
Re : Fonctionnement HP 8200
LeJediGris a écrit :
Salut,
Et le retour d'un dmesg par exemple ?
A+
ça fait lourd, 800 lignes...
[ 0.000000] microcode: microcode updated early to revision 0x29, date = 2013-06-12
[ 0.000000] Linux version 4.9.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.80-2 (2018-02-09)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-5-amd64 root=UUID=640106ae-b108-485a-bb56-4184c850b1a8 ro quiet
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000cabc3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cabc4000-0x00000000cac10fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cac11000-0x00000000cac1efff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cac1f000-0x00000000cac1ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cac20000-0x00000000cac3cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cac3d000-0x00000000cac41fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000cac42000-0x00000000cac4dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cac4e000-0x00000000cac6ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cac70000-0x00000000cacf0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cacf1000-0x00000000cacf5fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000cacf6000-0x00000000cacf6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cacf7000-0x00000000cacf7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cacf8000-0x00000000cad09fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cad0a000-0x00000000cad16fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cad17000-0x00000000cad19fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000cad1a000-0x00000000cad1bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cad1c000-0x00000000cad25fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000cad26000-0x00000000cad28fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cad29000-0x00000000cad6bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cad6c000-0x00000000caffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb800000-0x00000000cf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000003ae5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.10 by American Megatrends
[ 0.000000] efi: SMBIOS=0xcad27c18 ACPI=0xcac11000 ACPI 2.0=0xcac11000 MPS=0xf4ca0
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP Compaq 8200 Elite SFF PC/1495, BIOS J01 v02.29 04/04/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3ae600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0CB800000 mask FFF800000 uncachable
[ 0.000000] 1 base 0CC000000 mask FFC000000 uncachable
[ 0.000000] 2 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 base 3AE600000 mask FFFE00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f4c90-0x000f4c9f] mapped at [ffff8e71800f4c90]
[ 0.000000] Base memory trampoline at [ffff8e7180095000] 95000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] BRK [0xb9737000, 0xb9737fff] PGTABLE
[ 0.000000] BRK [0xb9738000, 0xb9738fff] PGTABLE
[ 0.000000] BRK [0xb9739000, 0xb9739fff] PGTABLE
[ 0.000000] BRK [0xb973a000, 0xb973afff] PGTABLE
[ 0.000000] BRK [0xb973b000, 0xb973bfff] PGTABLE
[ 0.000000] BRK [0xb973c000, 0xb973cfff] PGTABLE
[ 0.000000] BRK [0xb973d000, 0xb973dfff] PGTABLE
[ 0.000000] BRK [0xb973e000, 0xb973efff] PGTABLE
[ 0.000000] BRK [0xb973f000, 0xb973ffff] PGTABLE
[ 0.000000] BRK [0xb9740000, 0xb9740fff] PGTABLE
[ 0.000000] BRK [0xb9741000, 0xb9741fff] PGTABLE
[ 0.000000] BRK [0xb9742000, 0xb9742fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35d09000-0x36e7bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000CAC11000 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x00000000CAC11070 000064 (v01 HPQOEM SLIC-BPC 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000CAC18C40 0000F4 (v04 HPQOEM SLIC-BPC 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000CAC11168 007AD7 (v02 HPQOEM SLIC-BPC 00000008 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000CAD0EF80 000040
[ 0.000000] ACPI: APIC 0x00000000CAC18D38 000092 (v03 HPQOEM SLIC-BPC 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000CAC18DD0 0001D6 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 0x00000000CAC18FA8 00003C (v01 HPQOEM SLIC-BPC 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CAC18FE8 000038 (v01 HPQOEM SLIC-BPC 01072009 AMI. 00000004)
[ 0.000000] ACPI: ASF! 0x00000000CAC19020 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000CAC190C0 005270 (v01 COMPAQ WMI 00000001 MSFT 03000001)
[ 0.000000] ACPI: TCPA 0x00000000CAC1E330 000032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000003ae5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x3ae5f3000-0x3ae5f7fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000003ae5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff]
[ 0.000000] node 0: [mem 0x0000000040200000-0x00000000cabc3fff]
[ 0.000000] node 0: [mem 0x00000000cad6c000-0x00000000caffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000003ae5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000003ae5fffff]
[ 0.000000] On node 0 totalpages: 3641335
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 175 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12906 pages used for memmap
[ 0.000000] DMA32 zone: 825944 pages, LIFO batch:31
[ 0.000000] Normal zone: 43928 pages used for memmap
[ 0.000000] Normal zone: 2811392 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000cba00000-0x00000000cf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcabc4000-0xcac10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcac11000-0xcac1efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcac1f000-0xcac1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcac20000-0xcac3cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcac3d000-0xcac41fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcac42000-0xcac4dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcac4e000-0xcac6ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcac70000-0xcacf0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcacf1000-0xcacf5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcacf6000-0xcacf6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcacf7000-0xcacf7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcacf8000-0xcad09fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcad0a000-0xcad16fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcad17000-0xcad19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcad1a000-0xcad1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcad1c000-0xcad25fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcad26000-0xcad28fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcad29000-0xcad6bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcb7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb800000-0xcf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfa00000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcfa00000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff8e752e200000 s105304 r8192 d29864 u262144
[ 0.000000] pcpu-alloc: s105304 r8192 d29864 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 3584262
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-5-amd64 root=UUID=640106ae-b108-485a-bb56-4184c850b1a8 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 14204388K/14565340K available (6201K kernel code, 1158K rwdata, 2864K rodata, 1408K init, 688K bss, 360952K reserved, 0K cma-reserved)
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:33024 nr_irqs:488 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 3391.543 MHz processor
[ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 6783.08 BogoMIPS (lpj=13566172)
[ 0.000023] pid_max: default: 32768 minimum: 301
[ 0.000036] ACPI: Core revision 20160831
[ 0.003142] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.003549] Security Framework initialized
[ 0.003550] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.003554] AppArmor: AppArmor disabled by boot time parameter
[ 0.004156] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.006471] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.007491] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.007502] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.007743] CPU: Physical Processor ID: 0
[ 0.007744] CPU: Processor Core ID: 0
[ 0.007748] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.007748] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.007750] mce: CPU supports 9 MCE banks
[ 0.007756] CPU0: Thermal monitoring enabled (TM1)
[ 0.007764] process: using mwait in idle threads
[ 0.007767] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.007767] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.007768] Spectre V2 mitigation: Vulnerable: Minimal generic ASM retpoline
[ 0.008067] Freeing SMP alternatives memory: 24K
[ 0.010305] ftrace: allocating 25230 entries in 99 pages
[ 0.019183] smpboot: Max logical packages: 2
[ 0.019351] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.020126] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059813] TSC deadline timer enabled
[ 0.059817] smpboot: CPU0: Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.059819] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.059837] ... version: 3
[ 0.059837] ... bit width: 48
[ 0.059838] ... generic registers: 4
[ 0.059838] ... value mask: 0000ffffffffffff
[ 0.059839] ... max period: 00007fffffffffff
[ 0.059839] ... fixed-purpose events: 3
[ 0.059839] ... event mask: 000000070000000f
[ 0.060316] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.060394] x86: Booting SMP configuration:
[ 0.060394] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.078681] x86: Booted up 1 node, 8 CPUs
[ 0.078683] smpboot: Total of 8 processors activated (54264.68 BogoMIPS)
[ 0.084919] devtmpfs: initialized
[ 0.084974] x86/mm: Memory block size: 128MB
[ 0.087464] PM: Registering ACPI NVS region [mem 0xcabc4000-0xcac10fff] (315392 bytes)
[ 0.087471] PM: Registering ACPI NVS region [mem 0xcac1f000-0xcac1ffff] (4096 bytes)
[ 0.087472] PM: Registering ACPI NVS region [mem 0xcac4e000-0xcac6ffff] (139264 bytes)
[ 0.087475] PM: Registering ACPI NVS region [mem 0xcacf7000-0xcacf7fff] (4096 bytes)
[ 0.087475] PM: Registering ACPI NVS region [mem 0xcad0a000-0xcad16fff] (53248 bytes)
[ 0.087478] PM: Registering ACPI NVS region [mem 0xcad29000-0xcad6bfff] (274432 bytes)
[ 0.087487] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[ 0.087529] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.087539] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.087579] pinctrl core: initialized pinctrl subsystem
[ 0.087665] NET: Registered protocol family 16
[ 0.100509] cpuidle: using governor ladder
[ 0.116515] cpuidle: using governor menu
[ 0.116549] ACPI: bus type PCI registered
[ 0.116551] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.116629] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.116630] PCI: not using MMCONFIG
[ 0.116631] PCI: Using configuration type 1 for base access
[ 0.116668] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.136647] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.136828] ACPI: Added _OSI(Module Device)
[ 0.136829] ACPI: Added _OSI(Processor Device)
[ 0.136830] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.136830] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.136988] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.139683] ACPI: Dynamic OEM Table Load:
[ 0.139688] ACPI: SSDT 0xFFFF8E751D50E000 0006F4 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.139899] ACPI: Dynamic OEM Table Load:
[ 0.139901] ACPI: SSDT 0xFFFF8E751D967600 0000E4 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.140727] ACPI: Interpreter enabled
[ 0.140737] ACPI: (supports S0 S3 S4 S5)
[ 0.140738] ACPI: Using IOAPIC for interrupt routing
[ 0.140760] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.140801] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.140811] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.141079] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.145345] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.145348] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.145486] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.145766] PCI host bridge to bus 0000:00
[ 0.145768] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.145769] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.145769] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.145770] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.145771] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.145772] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.145773] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xffffffff window]
[ 0.145774] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.145779] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.145856] pci 0000:00:02.0: [8086:0102] type 00 class 0x030000
[ 0.145862] pci 0000:00:02.0: reg 0x10: [mem 0xfe000000-0xfe3fffff 64bit]
[ 0.145866] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.145869] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.145960] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.145980] pci 0000:00:16.0: reg 0x10: [mem 0xfe42a000-0xfe42a00f 64bit]
[ 0.146052] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.146121] pci 0000:00:16.3: [8086:1c3d] type 00 class 0x070002
[ 0.146137] pci 0000:00:16.3: reg 0x10: [io 0xf0e0-0xf0e7]
[ 0.146147] pci 0000:00:16.3: reg 0x14: [mem 0xfe429000-0xfe429fff]
[ 0.146277] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.146293] pci 0000:00:19.0: reg 0x10: [mem 0xfe400000-0xfe41ffff]
[ 0.146301] pci 0000:00:19.0: reg 0x14: [mem 0xfe428000-0xfe428fff]
[ 0.146311] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.146368] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.146404] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.146441] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.146458] pci 0000:00:1a.0: reg 0x10: [mem 0xfe427000-0xfe4273ff]
[ 0.146538] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.146575] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.146613] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.146628] pci 0000:00:1b.0: reg 0x10: [mem 0xfe420000-0xfe423fff 64bit]
[ 0.146688] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.146771] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.146937] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.146992] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.147043] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
[ 0.147204] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.147260] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.147304] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[ 0.147474] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.147532] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.147579] pci 0000:00:1c.7: [8086:1c1e] type 01 class 0x060400
[ 0.147755] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.147813] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 0.147849] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.147866] pci 0000:00:1d.0: reg 0x10: [mem 0xfe426000-0xfe4263ff]
[ 0.147947] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.147984] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.148018] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.148093] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.148137] pci 0000:00:1f.0: [8086:1c4e] type 00 class 0x060100
[ 0.148402] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.148416] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.148425] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.148433] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.148442] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.148450] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.148458] pci 0000:00:1f.2: reg 0x24: [mem 0xfe425000-0xfe4257ff]
[ 0.148498] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.148566] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.148581] pci 0000:00:1f.3: reg 0x10: [mem 0xfe424000-0xfe4240ff 64bit]
[ 0.148601] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.148758] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.148856] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.148951] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.149049] pci 0000:00:1c.7: PCI bridge to [bus 04]
[ 0.149135] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[ 0.149145] pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 0.149146] pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 0.149147] pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 0.149147] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.149148] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.149149] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 0.149151] pci 0000:00:1e.0: bridge window [mem 0xcfa00000-0xffffffff window] (subtractive decode)
[ 0.149700] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.149751] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.149796] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.149847] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.149896] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.149937] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.149987] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.150034] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.150111] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.150182] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.150183] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.150184] vgaarb: loaded
[ 0.150185] vgaarb: bridge control possible 0000:00:02.0
[ 0.150210] Registered efivars operations
[ 0.163671] PCI: Using ACPI for IRQ routing
[ 0.169409] PCI: pci_cache_line_size set to 64 bytes
[ 0.169470] e820: reserve RAM buffer [mem 0xcabc4000-0xcbffffff]
[ 0.169472] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.169473] e820: reserve RAM buffer [mem 0x3ae600000-0x3afffffff]
[ 0.169589] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.169593] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.171614] clocksource: Switched to clocksource hpet
[ 0.176157] VFS: Disk quotas dquot_6.6.0
[ 0.176183] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.176251] pnp: PnP ACPI init
[ 0.176352] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.176353] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.176354] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.176355] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.176356] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.176359] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.176448] system 00:01: [io 0x0620-0x063f] has been reserved
[ 0.176449] system 00:01: [io 0x0610-0x061f] has been reserved
[ 0.176451] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.176488] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.176527] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.176548] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.176585] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.176587] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.176760] pnp 00:06: [dma 0 disabled]
[ 0.176775] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.177084] pnp 00:07: [dma 1]
[ 0.177097] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.177134] pnp 00:08: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.177251] system 00:09: [io 0x0400-0x0453] has been reserved
[ 0.177252] system 00:09: [io 0x0458-0x047f] has been reserved
[ 0.177253] system 00:09: [io 0x1180-0x119f] has been reserved
[ 0.177254] system 00:09: [io 0x0500-0x057f] has been reserved
[ 0.177256] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.177257] system 00:09: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.177258] system 00:09: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.177259] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
[ 0.177260] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.177302] system 00:0a: [io 0x0454-0x0457] has been reserved
[ 0.177303] system 00:0a: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.177499] pnp: PnP ACPI: found 11 devices
[ 0.183806] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.183879] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.183906] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.183929] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.183952] pci 0000:00:1c.7: PCI bridge to [bus 04]
[ 0.183975] pci 0000:00:1e.0: PCI bridge to [bus 05]
[ 0.183986] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.183987] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.183988] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.183989] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.183990] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.183990] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.183991] pci_bus 0000:00: resource 10 [mem 0xcfa00000-0xffffffff window]
[ 0.183993] pci_bus 0000:05: resource 4 [io 0x0000-0x03af window]
[ 0.183993] pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.183994] pci_bus 0000:05: resource 6 [io 0x03b0-0x03df window]
[ 0.183995] pci_bus 0000:05: resource 7 [io 0x0d00-0xffff window]
[ 0.183996] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.183997] pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.183998] pci_bus 0000:05: resource 10 [mem 0xcfa00000-0xffffffff window]
[ 0.184085] NET: Registered protocol family 2
[ 0.184257] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.184422] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.184543] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.184563] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.184603] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.184670] NET: Registered protocol family 1
[ 0.184682] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[ 0.184686] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.231741] PCI: CLS 64 bytes, default 64
[ 0.231776] Unpacking initramfs...
[ 0.464638] Freeing initrd memory: 17868K
[ 0.464643] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.464645] software IO TLB [mem 0xc6bc4000-0xcabc4000] (64MB) mapped at [ffff8e7246bc4000-ffff8e724abc3fff]
[ 0.465011] audit: initializing netlink subsys (disabled)
[ 0.465025] audit: type=2000 audit(1519133210.460:1): initialized
[ 0.465356] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.465435] zbud: loaded
[ 0.466080] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.466109] io scheduler noop registered
[ 0.466110] io scheduler deadline registered
[ 0.466121] io scheduler cfq registered (default)
[ 0.467069] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.467078] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 0.467110] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.467118] pcie_pme 0000:00:1c.4:pcie001: service driver pcie_pme loaded
[ 0.467146] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[ 0.467154] pcie_pme 0000:00:1c.6:pcie001: service driver pcie_pme loaded
[ 0.467183] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
[ 0.467191] pcie_pme 0000:00:1c.7:pcie001: service driver pcie_pme loaded
[ 0.467199] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.467203] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.467210] efifb: probing for efifb
[ 0.467219] efifb: framebuffer at 0xd0000000, using 1920k, total 1920k
[ 0.467219] efifb: mode is 800x600x32, linelength=3200, pages=1
[ 0.467219] efifb: scrolling: redraw
[ 0.467220] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.468079] Console: switching to colour frame buffer device 100x37
[ 0.468837] fb0: EFI VGA frame buffer device
[ 0.468847] intel_idle: MWAIT substates: 0x1120
[ 0.468848] intel_idle: v0.4.1 model 0x2A
[ 0.469065] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.469718] GHES: HEST is not enabled!
[ 0.469767] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.491048] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.511948] 0000:00:16.3: ttyS1 at I/O 0xf0e0 (irq = 17, base_baud = 115200) is a 16550A
[ 0.512078] Linux agpgart interface v0.103
[ 0.591799] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[ 1.071897] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
[ 1.071920] tpm tpm0: TPM is disabled/deactivated (0x7)
[ 1.072043] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.072043] AMD IOMMUv2 functionality not available on this system
[ 1.072613] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.076034] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.076038] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.076269] mousedev: PS/2 mouse device common for all mice
[ 1.076322] rtc_cmos 00:04: RTC can wake from S4
[ 1.076637] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.076690] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.076699] intel_pstate: Intel P-state driver initializing
[ 1.077465] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.078388] NET: Registered protocol family 10
[ 1.078811] mip6: Mobile IPv6
[ 1.078814] NET: Registered protocol family 17
[ 1.078818] mpls_gso: MPLS GSO support
[ 1.079244] microcode: sig=0x206a7, pf=0x2, revision=0x29
[ 1.079460] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.079670] registered taskstats version 1
[ 1.079694] zswap: loaded using pool lzo/zbud
[ 1.105299] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.143950] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
[ 1.143994] ima: No TPM chip found, activating TPM-bypass!
[ 1.144480] rtc_cmos 00:04: setting system clock to 2018-02-20 13:26:52 UTC (1519133212)
[ 1.144599] PM: Hibernation image not present or could not be loaded.
[ 1.146413] Freeing unused kernel memory: 1408K
[ 1.146414] Write protecting the kernel read-only data: 12288k
[ 1.147137] Freeing unused kernel memory: 1976K
[ 1.151197] Freeing unused kernel memory: 1232K
[ 1.159054] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.180479] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.180578] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.180592] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.181748] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.181790] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.183240] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.183318] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.183338] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.183727] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.183800] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.219683] pps_core: LinuxPPS API ver. 1 registered
[ 1.219685] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.220034] PTP clock support registered
[ 1.221714] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.221714] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.221823] ACPI: bus type USB registered
[ 1.221860] usbcore: registered new interface driver usbfs
[ 1.221878] usbcore: registered new interface driver hub
[ 1.221925] usbcore: registered new device driver usb
[ 1.221947] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.222661] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.223067] ehci-pci: EHCI PCI platform driver
[ 1.223793] SCSI subsystem initialized
[ 1.225375] libata version 3.00 loaded.
[ 1.230432] AVX version of gcm_enc/dec engaged.
[ 1.230434] AES CTR mode by8 optimization enabled
[ 1.329144] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.436694] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 08:2e:5f:25:34:36
[ 1.436696] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.436750] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF
[ 1.436995] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.437004] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.437019] ehci-pci 0000:00:1a.0: debug port 2
[ 1.438356] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 1.440949] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.440969] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfe427000
[ 1.455975] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.456031] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.456033] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.456035] usb usb1: Product: EHCI Host Controller
[ 1.456036] usb usb1: Manufacturer: Linux 4.9.0-5-amd64 ehci_hcd
[ 1.456037] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.456336] hub 1-0:1.0: USB hub found
[ 1.456344] hub 1-0:1.0: 3 ports detected
[ 1.456673] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.456679] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.456699] ehci-pci 0000:00:1d.0: debug port 2
[ 1.460604] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.460618] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfe426000
[ 1.471968] tsc: Refined TSC clocksource calibration: 3392.296 MHz
[ 1.471978] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5e08003f, max_idle_ns: 440795205735 ns
[ 1.476002] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.476051] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.476053] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.476055] usb usb2: Product: EHCI Host Controller
[ 1.476056] usb usb2: Manufacturer: Linux 4.9.0-5-amd64 ehci_hcd
[ 1.476057] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.476333] hub 2-0:1.0: USB hub found
[ 1.476340] hub 2-0:1.0: 3 ports detected
[ 1.476588] i801_smbus 0000:00:1f.3: enabling device (0101 -> 0103)
[ 1.476726] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.477873] ahci 0000:00:1f.2: version 3.0
[ 1.478103] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x15 impl SATA mode
[ 1.478106] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
[ 1.501159] scsi host0: ahci
[ 1.501591] scsi host1: ahci
[ 1.502016] scsi host2: ahci
[ 1.502364] scsi host3: ahci
[ 1.502586] scsi host4: ahci
[ 1.502787] scsi host5: ahci
[ 1.502862] ata1: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425100 irq 29
[ 1.502863] ata2: DUMMY
[ 1.502868] ata3: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425200 irq 29
[ 1.502868] ata4: DUMMY
[ 1.502874] ata5: SATA max UDMA/133 abar m2048@0xfe425000 port 0xfe425300 irq 29
[ 1.502874] ata6: DUMMY
[ 1.784045] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.804049] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.819403] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.819429] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.819459] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.821002] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.821104] ata1.00: supports DRM functions and may not be fully accessible
[ 1.821921] ata1.00: disabling queued TRIM support
[ 1.821924] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT03B6Q, max UDMA/133
[ 1.821926] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.821976] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.821979] ata3.00: ATAPI: hp DVD A DH16ABSH, YHDF, max UDMA/100
[ 1.822599] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.822703] ata1.00: supports DRM functions and may not be fully accessible
[ 1.823040] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.823045] ata3.00: configured for UDMA/100
[ 1.823360] ata1.00: disabling queued TRIM support
[ 1.823853] ata1.00: configured for UDMA/133
[ 1.824320] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 3B6Q PQ: 0 ANSI: 5
[ 1.868202] scsi 2:0:0:0: CD-ROM hp DVD A DH16ABSH YHDF PQ: 0 ANSI: 5
[ 1.884336] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.884387] sd 0:0:0:0: [sda] Write Protect is off
[ 1.884389] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.884404] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.887438] sda: sda1 sda2
[ 1.887790] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.901175] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.901177] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.901383] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.936750] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.936753] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.937154] hub 1-1:1.0: USB hub found
[ 1.937302] hub 1-1:1.0: 6 ports detected
[ 1.952617] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.952620] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.953140] hub 2-1:1.0: USB hub found
[ 1.953292] hub 2-1:1.0: 8 ports detected
[ 2.010948] random: fast init done
[ 2.224157] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 2.240137] usb 2-1.7: new low-speed USB device number 3 using ehci-pci
[ 2.334091] usb 1-1.1: New USB device found, idVendor=152d, idProduct=0578
[ 2.334094] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.334095] usb 1-1.1: Product: USB to ATA/ATAPI Bridge
[ 2.334097] usb 1-1.1: Manufacturer: JMicron
[ 2.334107] usb 1-1.1: SerialNumber: 0123456789ABCDEF
[ 2.337004] usbcore: registered new interface driver usb-storage
[ 2.337854] scsi host6: uas
[ 2.338010] usbcore: registered new interface driver uas
[ 2.338717] scsi 6:0:0:0: Direct-Access JMicron Generic 0203 PQ: 0 ANSI: 6
[ 2.353876] usb 2-1.7: New USB device found, idVendor=046d, idProduct=c408
[ 2.353888] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.353889] usb 2-1.7: Product: USB Trackball
[ 2.353891] usb 2-1.7: Manufacturer: Logitech
[ 2.356266] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.359732] usbcore: registered new interface driver usbhid
[ 2.359733] usbhid: USB HID core driver
[ 2.360643] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/0003:046D:C408.0001/input/input3
[ 2.360744] hid-generic 0003:046D:C408.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1d.0-1.7/input0
[ 2.385139] sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 2.385142] sd 6:0:0:0: [sdb] 4096-byte physical blocks
[ 2.386636] sd 6:0:0:0: [sdb] Write Protect is off
[ 2.386639] sd 6:0:0:0: [sdb] Mode Sense: 5f 00 00 08
[ 2.387389] sd 6:0:0:0: [sdb] Disabling FUA
[ 2.387392] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.391879] sdb: sdb1
[ 2.394229] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 2.416164] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[ 2.496415] clocksource: Switched to clocksource tsc
[ 2.526283] usb 1-1.2: New USB device found, idVendor=152d, idProduct=0578
[ 2.526286] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.526288] usb 1-1.2: Product: USB to ATA/ATAPI Bridge
[ 2.526298] usb 1-1.2: Manufacturer: JMicron
[ 2.526299] usb 1-1.2: SerialNumber: 0123456789ABCDEF
[ 2.527319] scsi host7: uas
[ 2.528291] scsi 7:0:0:0: Direct-Access JMicron Generic 0203 PQ: 0 ANSI: 6
[ 2.560888] sd 7:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.560890] sd 7:0:0:0: [sdc] 4096-byte physical blocks
[ 2.561886] sd 7:0:0:0: [sdc] Write Protect is off
[ 2.561889] sd 7:0:0:0: [sdc] Mode Sense: 5f 00 00 08
[ 2.562380] sd 7:0:0:0: [sdc] Disabling FUA
[ 2.562382] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.566020] sdc: sdc1
[ 2.568391] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 2.604186] usb 1-1.3: new high-speed USB device number 5 using ehci-pci
[ 2.737831] usb 1-1.3: New USB device found, idVendor=14cd, idProduct=6116
[ 2.737834] usb 1-1.3: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 2.737835] usb 1-1.3: Product: USB Mass Storage Device
[ 2.737837] usb 1-1.3: Manufacturer: Generic
[ 2.737838] usb 1-1.3: SerialNumber: 116AC2101219
[ 2.738264] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 2.738544] scsi host8: usb-storage 1-1.3:1.0
[ 2.816271] usb 1-1.4: new high-speed USB device number 6 using ehci-pci
[ 2.928809] usb 1-1.4: New USB device found, idVendor=1bcf, idProduct=0c31
[ 2.928812] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.928813] usb 1-1.4: Product: USB to Serial-ATA bridge
[ 2.928815] usb 1-1.4: Manufacturer: Sunplus Innovation Technology
[ 2.928817] usb 1-1.4: SerialNumber: FF500FF000000000000000F372FEFF
[ 2.930817] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 2.931078] scsi host9: usb-storage 1-1.4:1.0
[ 3.008258] usb 1-1.5: new low-speed USB device number 7 using ehci-pci
[ 3.745464] scsi 8:0:0:0: Direct-Access Mass Storage Device PQ: 0 ANSI: 0
[ 3.746874] sd 8:0:0:0: [sdd] 62533294 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 3.747536] sd 8:0:0:0: [sdd] Write Protect is off
[ 3.747541] sd 8:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 3.748157] sd 8:0:0:0: [sdd] No Caching mode page found
[ 3.748218] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 3.752824] sdd: sdd1
[ 3.755163] sd 8:0:0:0: [sdd] Attached SCSI disk
[ 3.940662] scsi 9:0:0:0: Direct-Access ST500LM0 00-1EJ162 0200 PQ: 0 ANSI: 4
[ 3.942352] sd 9:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 3.949411] sd 9:0:0:0: [sde] Write Protect is off
[ 3.949414] sd 9:0:0:0: [sde] Mode Sense: 38 00 00 00
[ 3.956473] sd 9:0:0:0: [sde] No Caching mode page found
[ 3.956533] sd 9:0:0:0: [sde] Assuming drive cache: write through
[ 3.983868] sde: sde1
[ 4.002919] sd 9:0:0:0: [sde] Attached SCSI disk
[ 4.426626] usb 1-1.5: New USB device found, idVendor=0463, idProduct=ffff
[ 4.426629] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 4.426631] usb 1-1.5: Product: PROTECTIONCENTER
[ 4.426632] usb 1-1.5: Manufacturer: MGE OPS SYSTEMS
[ 4.426634] usb 1-1.5: SerialNumber: 000000000
[ 4.679786] hid-generic 0003:0463:FFFF.0002: hiddev0,hidraw1: USB HID v1.00 Device [MGE OPS SYSTEMS PROTECTIONCENTER] on usb-0000:00:1a.0-1.5/input0
[ 4.756700] usb 1-1.6: new high-speed USB device number 8 using ehci-pci
[ 4.869975] usb 1-1.6: New USB device found, idVendor=04b8, idProduct=082b
[ 4.869978] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.869980] usb 1-1.6: Product: USB2.0 MFP(Hi-Speed)
[ 4.869981] usb 1-1.6: Manufacturer: EPSON
[ 4.869983] usb 1-1.6: SerialNumber: 007030610041943390
[ 4.875388] usb-storage 1-1.6:1.2: USB Mass Storage device detected
[ 4.875823] scsi host10: usb-storage 1-1.6:1.2
[ 5.892780] scsi 10:0:0:0: Direct-Access EPSON Stylus Storage 1.00 PQ: 0 ANSI: 2
[ 5.902402] sd 10:0:0:0: [sdf] Attached SCSI removable disk
[ 8.308131] random: crng init done
[ 32.629736] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 32.703257] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 32.726699] efivars: duplicate variable: SlotPresent-ec87d643-eba4-4bb5-a1e5-3f3e36b20da9
[ 32.730574] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 32.730746] systemd[1]: Detected architecture x86-64.
[ 32.730905] systemd[1]: Set hostname to <debian-fixe>.
[ 32.780620] systemd[1]: nut-monitor.service: Cannot add dependency job, ignoring: Unit nut-monitor.service is masked.
[ 32.780630] systemd[1]: nut-server.service: Cannot add dependency job, ignoring: Unit nut-server.service is masked.
[ 32.781138] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 32.781188] systemd[1]: Reached target User and Group Name Lookups.
[ 32.781199] systemd[1]: Reached target Swap.
[ 32.781244] systemd[1]: Listening on Journal Socket.
[ 32.781372] systemd[1]: Created slice User and Session Slice.
[ 32.789199] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 32.792785] lp: driver loaded but no devices found
[ 32.794679] ppdev: user-space parallel port driver
[ 32.796066] parport_pc 00:07: reported by Plug and Play ACPI
[ 32.796217] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 32.823668] systemd-journald[404]: Received request to flush runtime journal from PID 1
[ 32.845961] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 32.845965] ACPI: Power Button [PWRB]
[ 32.846023] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 32.846025] ACPI: Power Button [PWRF]
[ 32.854068] wmi: Mapper loaded
[ 32.862130] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.866222] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 32.866263] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 32.866305] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 32.866358] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 32.866425] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 32.866479] sd 9:0:0:0: Attached scsi generic sg5 type 0
[ 32.866522] sd 10:0:0:0: Attached scsi generic sg6 type 0
[ 32.868206] [drm] Initialized
[ 32.894949] lp0: using parport0 (interrupt-driven).
[ 32.899154] EFI Variables Facility v0.08 2004-May-17
[ 32.899887] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 32.906243] efivars: duplicate variable: SlotPresent-ec87d643-eba4-4bb5-a1e5-3f3e36b20da9
[ 32.927510] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 32.927512] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 32.927512] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 32.927513] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 32.929067] pstore: using zlib compression
[ 32.929081] pstore: Registered efi as persistent store backend
[ 32.929439] usblp 1-1.6:1.1: usblp1: USB Bidirectional printer dev 8 if 1 alt 0 proto 2 vid 0x04B8 pid 0x082B
[ 32.929459] usbcore: registered new interface driver usblp
[ 32.942862] snd_hda_intel 0000:00:1b.0: enabling device (0100 -> 0102)
[ 32.943950] [drm] Memory usable by graphics device = 2048M
[ 32.943953] checking generic (d0000000 1e0000) vs hw (d0000000 10000000)
[ 32.943954] fb: switching to inteldrmfb from EFI VGA
[ 32.943988] Console: switching to colour dummy device 80x25
[ 32.944441] [drm] Replacing VGA console driver
[ 32.944614] i801_smbus 0000:00:1f.3: BIOS is accessing SMBus registers
[ 32.944619] i801_smbus 0000:00:1f.3: Driver SMBus register access inhibited
[ 32.949481] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 32.949482] [drm] Driver supports precise vblank timestamp query.
[ 32.951320] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 32.952941] kvm: disabled by bios
[ 32.955516] intel_rapl: Found RAPL domain package
[ 32.955518] intel_rapl: Found RAPL domain core
[ 32.955519] intel_rapl: Found RAPL domain uncore
[ 32.955524] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 32.955527] iTCO_vendor_support: vendor-support=0
[ 32.955898] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 32.955930] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 32.956077] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 32.958918] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 32.958920] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 32.958922] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 32.958923] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 32.958924] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 32.958926] snd_hda_codec_realtek hdaudioC0D0: Mic=0x19
[ 32.958927] snd_hda_codec_realtek hdaudioC0D0: Line=0x18
[ 32.959932] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 32.961648] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 32.979664] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 32.980464] fbcon: inteldrmfb (fb0) is primary device
[ 33.003536] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 33.003587] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 33.003628] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 33.003668] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 33.003706] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 33.062780] Console: switching to colour frame buffer device 240x67
[ 33.082737] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 33.182866] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[ 33.419593] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
[ 34.809131] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 34.844140] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 35.355992] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 35.599824] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 39.278408] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 39.278453] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 40.160190] usblp1: removed
[ 40.167759] usblp 1-1.6:1.1: usblp1: USB Bidirectional printer dev 8 if 1 alt 0 proto 2 vid 0x04B8 pid 0x082BTu trouves des anomalies "explicables" et surtout, rectifiables ?
Merci pour ton retour
Cordialement
Bernard
Debian 10.0 / HP-8200SFF, Intel I7-2600, 3.4GHz, Ram 16Go, SSD 1To
Le Blog des bonnes questions à se poser, et comment se les poser...
Hors ligne
#10 Le 27/02/2018, à 18:09
- ub821
Re : Fonctionnement HP 8200
LeJediGris a écrit :
Salut,
Et le retour d'un dmesg par exemple ?
A+
Le retour du dsmeg t'a laissé sans voix...
Cordialement
Bernard
Debian 10.0 / HP-8200SFF, Intel I7-2600, 3.4GHz, Ram 16Go, SSD 1To
Le Blog des bonnes questions à se poser, et comment se les poser...
Hors ligne
Pages : 1