#1 Le 01/03/2018, à 13:37
- NewLinux2018
[Résolu] Clé WIFI EDUP (RTL8811AU)
Bonjour à tous,
Je rencontre un problème pour l'installation d'une clé WIFI EDUP
Pour connaître quel type de carte il s'agit, j'ai inséré la clé EDUP sur un poste WINDOWS.
Dans le gestionnaire de périphérique la clé est reconnu comme :
Realtek RTL8811AU Wireless LAN 802.11ac USB 2.0
Je suis sur une version Ubuntu 16.04.4 LTS \n \l d'ubuntu ou plus précisement :
Linux version 4.4.0-116-generic (buildd@lgw01-amd64-021) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9) ) #140-Ubuntu SMP Mon Feb 12 21:23:04 UTC 2018
Résultat de la commande lsusb :
Bus 002 Device 009: ID 0bda:0811 Realtek Semiconductor Corp.
Bus 002 Device 008: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 002 Device 004: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 002 Device 003: ID 413c:2107 Dell Computer Corp.
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Résultat de la commande dmesg | tail -10
[66041.071482] usb 2-1.5: New USB device found, idVendor=0424, idProduct=2514
[66041.071487] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[66041.071916] hub 2-1.5:1.0: USB hub found
[66041.072052] hub 2-1.5:1.0: 4 ports detected
[66664.579989] usb 2-1.7: new high-speed USB device number 9 using ehci-pci
[66664.673107] usb 2-1.7: New USB device found, idVendor=0bda, idProduct=0811
[66664.673113] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[66664.673124] usb 2-1.7: Product: 802.11ac WLAN Adapter
[66664.673127] usb 2-1.7: Manufacturer: Realtek
[66664.673130] usb 2-1.7: SerialNumber: 00e04c000001
admposte@FRA-PST-Ubuntun:~/Downloads$
Résultat de la commande sudo bash install.sh le répertoire :
Comme le contenu est très long je mets juste la fin
La décompression du fichier se passe bien, il n'y a pas de message d'erreur.
Par contre pour la fin je ne vois pas comment résoudre le problème
scripts/Makefile.build:258: recipe for target '/home/admposte/Downloads/linux/driver/rtl8821AU_linux_v4.3.14_13455.20150212_BTCOEX20150128-51/core/rtw_cmd.o' failed
make[2]: *** [/home/admposte/Downloads/linux/driver/rtl8821AU_linux_v4.3.14_13455.20150212_BTCOEX20150128-51/core/rtw_cmd.o] Error 1
Makefile:1423: recipe for target '_module_/home/admposte/Downloads/linux/driver/rtl8821AU_linux_v4.3.14_13455.20150212_BTCOEX20150128-51' failed
make[1]: *** [_module_/home/admposte/Downloads/linux/driver/rtl8821AU_linux_v4.3.14_13455.20150212_BTCOEX20150128-51] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-4.4.0-116-generic'
Makefile:1551: recipe for target 'modules' failed
make: *** [modules] Error 2
##################################################
Compile make driver error: 2
Please check error Mesg
##################################################
Le pilote est issu du site du constructeur.
D'avance merci de votre aide.
Modération:
Pour un bon balisage consultez svp, Comment postez vos images tuto ici les Balises codes exemple
Donnez un retour complet depuis votre identifiant à votre identifiant, sera plus clair pour vous aider
Dernière modification par NewLinux2018 (Le 20/03/2018, à 13:53)
Hors ligne
#2 Le 01/03/2018, à 14:00
- xubu1957
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
Bonjour,
Pour ta clé wifi :
Bus 002 Device 009: ID 0bda:0811 Realtek Semiconductor Corp.
Regarde dans cette discussion > [Résolu]pas de Wifi rtl8812au- echec de compilation - conflit kernel
Bonjour,
....
a faire pc relié au net via un cable :
sudo apt-get update sudo apt-get install linux-headers-generic build-essential git git clone https://github.com/gnab/rtl8812au.git cd ~/rtl8812au make sudo make install sudo modprobe 8812au
et a chaque fois qu'il y aura une mise a jour du noyau :
cd ~/rtl8812au make clean make sudo make install sudo modprobe 8812au
Rajout - [SOLVED] Compiling RTL8821AU Wifi USB adapter failure (Compile make driver error: 2)
Dernière modification par xubu1957 (Le 01/03/2018, à 14:30)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#3 Le 01/03/2018, à 15:53
- NewLinux2018
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
Bonjour,
Merci pour ton retour.
Il y a du mieux.
Pas de message d'erreur durant la compilation.
De plus lorsque j’insère la clé WIFI, la led de la clé clignote, elle bien vu.
Après reboot du système, je vois bien la liste des SSID WIFI disponible.
Après avoir sélectionné le SSID, j'ai saisi le mot de passe de la clé WIFI, mais rien, pas de connexion sur le SSID.
Je redémarre une nouvelle vois le poste, et dans la liste des SSID plus rien ne s'affiche.
Le curseur de recherche tourne en rond et rien ne s'affiche.
Encore une fois merci pour votre aide.
Hors ligne
#4 Le 01/03/2018, à 15:56
- xubu1957
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
Avec la commande :
sudo modprobe 8812au
il ressort un message d'erreur ?
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#5 Le 01/03/2018, à 16:06
- NewLinux2018
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
Non pas de message d'erreur
Info suite à la commande
dmesg | tail -50
[ 2645.306784] RTL871X: power-on :REG_SYS_CLKR 0x09=0x30. REG_CR 0x100=0xea.
[ 2645.306786] RTL871X: MAC has not been powered on yet.
[ 2645.314160] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 2645.378406] RTL871X: FirmwareDownload8812 fw source from Header
[ 2645.378412] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 2645.378415] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 2645.417907] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00060605
[ 2645.419777] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2645.447529] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 2645.447534] RTL871X: FWDL success. write_fw:1, 68ms
[ 2645.447536] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 2645.472031] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 2645.659030] RTL871X: HW_VAR_BASIC_RATE: 0x15f -> 0x15f -> 0x15f
[ 2645.672031] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 2645.672673] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 2645.758154] RTL871X: pDM_Odm TxPowerTrackControl = 1
[ 2645.759026] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 2645.760152] RTL871X: MAC Address from REG_MACID = e8:4e:06:35:93:8d
[ 2645.760154] RTL871X: rtl8812au_hal_init in 452ms
[ 2645.760797] RTL871X: hw_var_set_opmode()-5008 mode = 2
[ 2645.761290] RTL871X: <=== rtw_ips_pwr_up.............. in 456ms
[ 2645.761292] RTL871X: nolinked power save leave
[ 2645.761403] RTL871X: ==> ips_leave.....LED(0x01828282)...
[ 2647.159156] RTL871X: HW_VAR_BASIC_RATE: 0x150 -> 0x150 -> 0x150
[ 2647.764277] RTL871X: IsBtDisabled=1, IsBtControlLps=0
[ 2649.755655] RTL871X: HW_VAR_BASIC_RATE: 0x15f -> 0x15f -> 0x15f
[ 2649.768234] RTL871X: IsBtDisabled=1, IsBtControlLps=0
[ 2649.769277] RTL871X: survey done event(0) band:0 for enxe84e0635938d
[ 2649.772780] RTL871X: rtw_indicate_scan_done(enxe84e0635938d)
[ 2649.776243] RTL871X: IsBtDisabled=1, IsBtControlLps=0
[ 2650.108909] RTL871X: ==>rtw_ps_processor .fw_state(8)
[ 2650.108914] RTL871X: ==>ips_enter cnts:5
[ 2650.108916] RTL871X: nolinked power save enter
[ 2650.108918] RTL871X: ===> rtw_ips_pwr_down...................
[ 2650.108920] RTL871X: ====> rtw_ips_dev_unload...
[ 2650.119946] RTL871X: usb_read_port_cancel
[ 2650.120148] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0)
[ 2650.120397] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0)
[ 2650.120645] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0)
[ 2650.120896] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0)
[ 2650.121146] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0)
[ 2650.121396] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0)
[ 2650.121646] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0)
[ 2650.121898] RTL871X: usb_read_port_complete() RX Warning! bDriverStopped(0) OR bSurpriseRemoved(0)
[ 2650.121902] RTL871X: usb_write_port_cancel
[ 2650.121915] RTL871X: ==> rtl8812au_hal_deinit
[ 2650.122924] RTL871X: hal_poweroff_8812au
[ 2650.126899] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2650.129650] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 2650.130149] RTL871X: <=== rtw_ips_pwr_down..................... in 20ms
Dernière modification par NewLinux2018 (Le 01/03/2018, à 16:20)
Hors ligne
#6 Le 01/03/2018, à 16:07
- xubu1957
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
Pour ajouter toi-même les balises code à ton précédent message… Merci
Cliquer sur le lien « Modifier » en bas à droite du message
Sélectionner le texte
Cliquer sur le <> de l'éditeur de message
_ _ _
Il faut donner, en se servant du : Retour utilisable de commande, ces informations : Configuration wifi ou un wificheck
Nota : un fichier wificheck.log est créé dans votre répertoire personnel, collez l'intégralité de son contenu dans votre discussion.
Dernière modification par xubu1957 (Le 01/03/2018, à 16:32)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#7 Le 01/03/2018, à 17:12
- NewLinux2018
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
SI je comprend bien tu veux le résultat de chacune des commandes qu'il y a dans le lien Configuration WIFI
Donc voici le résultat pour chacune des commandes
admposte@FRA-PST-Ubuntun:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.4 LTS"
admposte@FRA-PST-Ubuntun:~$ lsusb
Bus 002 Device 009: ID 0bda:0811 Realtek Semiconductor Corp.
Bus 002 Device 006: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 002 Device 005: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 002 Device 004: ID 413c:2107 Dell Computer Corp.
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
admposte@FRA-PST-Ubuntun:~$ lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4)
00:1f.0 ISA bridge: Intel Corporation Q65 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
admposte@FRA-PST-Ubuntun:~$ lspci -k -nn | grep -A 3 -i net
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
Subsystem: Dell 82579LM Gigabit Network Connection [1028:047e]
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04)
admposte@FRA-PST-Ubuntun:~$ lspci -k
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
Subsystem: Dell 2nd Generation Core Processor Family DRAM Controller
Kernel driver in use: snb_uncore
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
DeviceName: Onboard IGD
Subsystem: Dell 2nd Generation Core Processor Family Integrated Graphics Controller
Kernel driver in use: i915
Kernel modules: i915
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
Subsystem: Dell 6 Series/C200 Series Chipset Family MEI Controller
Kernel driver in use: mei_me
Kernel modules: mei_me
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
Subsystem: Dell 82579LM Gigabit Network Connection
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
Subsystem: Dell 6 Series/C200 Series Chipset Family USB Enhanced Host Controller
Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
DeviceName: Onboard Audio
Subsystem: Dell 6 Series/C200 Series Chipset Family High Definition Audio Controller
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4)
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
Subsystem: Dell 6 Series/C200 Series Chipset Family USB Enhanced Host Controller
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4)
00:1f.0 ISA bridge: Intel Corporation Q65 Express Chipset Family LPC Controller (rev 04)
Subsystem: Dell Q65 Express Chipset Family LPC Controller
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family SATA AHCI Controller (rev 04)
Subsystem: Dell 6 Series/C200 Series Chipset Family SATA AHCI Controller
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
Subsystem: Dell 6 Series/C200 Series Chipset Family SMBus Controller
Kernel modules: i2c_i801
admposte@FRA-PST-Ubuntun:~$ sudo lshw -C network
*-network
description: Ethernet interface
product: 82579LM Gigabit Network Connection
vendor: Intel Corporation
physical id: 19
bus info: pci@0000:00:19.0
logical name: enp0s25
version: 04
serial: 18:03:73:47:0d:54
size: 1Gbit/s
capacity: 1Gbit/s
width: 32 bits
clock: 33MHz
capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k duplex=full firmware=0.13-4 ip=192.168.3.160 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s
resources: irq:25 memory:e1a00000-e1a1ffff memory:e1a80000-e1a80fff ioport:3080(size=32)
*-network
description: Wireless interface
physical id: 1
bus info: usb@2:1.7
logical name: enxe84e0635938d
serial: e8:4e:06:35:93:8d
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=rtl8821au multicast=yes wireless=unassociated
admposte@FRA-PST-Ubuntun:~$ lsmod
Module Size Used by
cfg80211 565248 0
8812au 991232 0
8821au 1912832 0
dcdbas 16384 0
intel_rapl 20480 0
snd_hda_codec_hdmi 53248 1
snd_hda_codec_realtek 90112 1
snd_hda_codec_generic 77824 1 snd_hda_codec_realtek
snd_hda_intel 40960 6
snd_hda_codec 135168 4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_hda_core 77824 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
x86_pkg_temp_thermal 16384 0
intel_powerclamp 16384 0
snd_hwdep 16384 1 snd_hda_codec
coretemp 16384 0
kvm_intel 172032 0
kvm 548864 1 kvm_intel
snd_pcm 106496 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
input_leds 16384 0
irqbypass 16384 1 kvm
crct10dif_pclmul 16384 0
crc32_pclmul 16384 0
ghash_clmulni_intel 16384 0
snd_seq_midi 16384 0
cryptd 20480 1 ghash_clmulni_intel
snd_seq_midi_event 16384 1 snd_seq_midi
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 69632 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 32768 2 snd_pcm,snd_seq
mei_me 36864 0
snd 81920 23 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
mei 98304 1 mei_me
serio_raw 16384 0
soundcore 16384 1 snd
shpchp 36864 0
8250_fintek 16384 0
lpc_ich 24576 0
mac_hid 16384 0
parport_pc 32768 1
ppdev 20480 0
lp 20480 0
parport 49152 3 lp,ppdev,parport_pc
autofs4 40960 2
hid_generic 16384 0
usbhid 49152 0
hid 122880 2 hid_generic,usbhid
i915 1232896 6
i2c_algo_bit 16384 1 i915
drm_kms_helper 155648 1 i915
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
fb_sys_fops 16384 1 drm_kms_helper
drm 364544 8 i915,drm_kms_helper
psmouse 131072 0
e1000e 241664 0
ahci 36864 2
libahci 32768 1 ahci
ptp 20480 1 e1000e
pps_core 20480 1 ptp
fjes 28672 0
video 40960 1 i915
admposte@FRA-PST-Ubuntun:~$ iwconfig
lo no wireless extensions.
enp0s25 no wireless extensions.
enxe84e0635938d unassociated Nickname:"<WIFI@REALTEK>"
Mode:Managed Frequency=2.412 GHz Access Point: Not-Associated
Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
admposte@FRA-PST-Ubuntun:~$ ifconfig
enp0s25 Link encap:Ethernet HWaddr 18:03:73:47:0d:54
inet addr:192.168.3.160 Bcast:192.168.3.255 Mask:255.255.255.0
inet6 addr: fe80::3174:7d7c:59ec:4ef3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:24566 errors:0 dropped:0 overruns:0 frame:0
TX packets:5201 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:11926260 (11.9 MB) TX bytes:1040501 (1.0 MB)
Interrupt:20 Memory:e1a00000-e1a20000
enxe84e0635938d Link encap:Ethernet HWaddr e8:4e:06:35:93:8d
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:255707 errors:0 dropped:0 overruns:0 frame:0
TX packets:255707 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:197196901 (197.1 MB) TX bytes:197196901 (197.1 MB)
admposte@FRA-PST-Ubuntun:~$ sudo iwlist scan
lo Interface doesn't support scanning.
enp0s25 Interface doesn't support scanning.
enxe84e0635938d No scan results
admposte@FRA-PST-Ubuntun:~$ uname -r -m
4.4.0-116-generic x86_64
admposte@FRA-PST-Ubuntun:~$ cat /ect/network/interfaces
cat: /ect/network/interfaces: No such file or directory
admposte@FRA-PST-Ubuntun:~$ cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
admposte@FRA-PST-Ubuntun:~$ nm-tool
No command 'nm-tool' found, did you mean:
Command 'dm-tool' from package 'lightdm' (main)
nm-tool: command not found
admposte@FRA-PST-Ubuntun:~$ sudo rfkill list
admposte@FRA-PST-Ubuntun:~$ nmcli connection show
NAME UUID TYPE DEVICE
Wired connection 1 e71d92a3-84c8-336a-ac15-a78296c9c47e 802-3-ethernet enp0s25
MALT_BORNE 72f766bb-8a47-4ec9-a28c-346d6c2b1887 802-11-wireless --
MALT_BYOD 76ca4fcb-1590-4226-b2e7-6cd0affd93ef 802-11-wireless --
Hors ligne
#8 Le 01/03/2018, à 17:19
- NewLinux2018
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
Contenu du fichier wificheck.log
>> cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.4 LTS"
>> lsusb
Bus 002 Device 010: ID 0bda:0811 Realtek Semiconductor Corp.
Bus 002 Device 006: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 002 Device 005: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 002 Device 004: ID 413c:2107 Dell Computer Corp.
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>> lspci -k -nn | grep -A 3 -i net
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
Subsystem: Dell 82579LM Gigabit Network Connection [1028:047e]
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04)
>> sudo lshw -C network
*-network
description: Ethernet interface
product: 82579LM Gigabit Network Connection
vendor: Intel Corporation
physical id: 19
bus info: pci@0000:00:19.0
logical name: enp0s25
version: 04
serial: 18:03:73:47:0d:54
size: 1Gbit/s
capacity: 1Gbit/s
width: 32 bits
clock: 33MHz
capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=3.2.6-k duplex=full firmware=0.13-4 ip=192.168.3.160 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s
resources: irq:25 memory:e1a00000-e1a1ffff memory:e1a80000-e1a80fff ioport:3080(size=32)
*-network
description: Wireless interface
physical id: 1
bus info: usb@2:1.8
logical name: enxe84e0635938d
serial: e8:4e:06:35:93:8d
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=rtl8821au multicast=yes wireless=unassociated
>> lsmod
Module Size Used by
cfg80211 565248 0
8812au 991232 0
8821au 1912832 0
dcdbas 16384 0
intel_rapl 20480 0
snd_hda_codec_hdmi 53248 1
snd_hda_codec_realtek 90112 1
snd_hda_codec_generic 77824 1 snd_hda_codec_realtek
snd_hda_intel 40960 6
snd_hda_codec 135168 4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
snd_hda_core 77824 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
x86_pkg_temp_thermal 16384 0
intel_powerclamp 16384 0
snd_hwdep 16384 1 snd_hda_codec
coretemp 16384 0
kvm_intel 172032 0
kvm 548864 1 kvm_intel
snd_pcm 106496 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
input_leds 16384 0
irqbypass 16384 1 kvm
crct10dif_pclmul 16384 0
crc32_pclmul 16384 0
ghash_clmulni_intel 16384 0
snd_seq_midi 16384 0
cryptd 20480 1 ghash_clmulni_intel
snd_seq_midi_event 16384 1 snd_seq_midi
snd_rawmidi 32768 1 snd_seq_midi
snd_seq 69632 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 16384 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 32768 2 snd_pcm,snd_seq
mei_me 36864 0
snd 81920 23 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
mei 98304 1 mei_me
serio_raw 16384 0
soundcore 16384 1 snd
shpchp 36864 0
8250_fintek 16384 0
lpc_ich 24576 0
mac_hid 16384 0
parport_pc 32768 1
ppdev 20480 0
lp 20480 0
parport 49152 3 lp,ppdev,parport_pc
autofs4 40960 2
hid_generic 16384 0
usbhid 49152 0
hid 122880 2 hid_generic,usbhid
i915 1232896 6
i2c_algo_bit 16384 1 i915
drm_kms_helper 155648 1 i915
syscopyarea 16384 1 drm_kms_helper
sysfillrect 16384 1 drm_kms_helper
sysimgblt 16384 1 drm_kms_helper
fb_sys_fops 16384 1 drm_kms_helper
drm 364544 8 i915,drm_kms_helper
psmouse 131072 0
e1000e 241664 0
ahci 36864 2
libahci 32768 1 ahci
ptp 20480 1 e1000e
pps_core 20480 1 ptp
fjes 28672 0
video 40960 1 i915
>> iwconfig
enxe84e0635938d unassociated Nickname:"<WIFI@REALTEK>"
Mode:Managed Frequency=2.412 GHz Access Point: Not-Associated
Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
>> ifconfig -a
enp0s25 Link encap:Ethernet HWaddr 18:03:73:47:0d:54
inet addr:192.168.3.160 Bcast:192.168.3.255 Mask:255.255.255.0
inet6 addr: fe80::3174:7d7c:59ec:4ef3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:27295 errors:0 dropped:0 overruns:0 frame:0
TX packets:5645 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:12679468 (12.6 MB) TX bytes:1100598 (1.1 MB)
Interrupt:20 Memory:e1a00000-e1a20000
enxe84e0635938d Link encap:Ethernet HWaddr e8:4e:06:35:93:8d
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:1 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:261710 errors:0 dropped:0 overruns:0 frame:0
TX packets:261710 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:201334495 (201.3 MB) TX bytes:201334495 (201.3 MB)
>> sudo iwlist scan
enxe84e0635938d No scan results
>> uname -r -m
4.4.0-116-generic x86_64
>> cat /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
>> nm-tool
>> nmcli dev wifi
* SSID MODE CHAN RATE SIGNAL BARS SECURITY
>> nmcli connection list (< 15.04) ou nmcli connection show (>= 15.04)
NAME UUID TYPE DEVICE
Wired connection 1 e71d92a3-84c8-336a-ac15-a78296c9c47e 802-3-ethernet enp0s25
MALT_BORNE 72f766bb-8a47-4ec9-a28c-346d6c2b1887 802-11-wireless --
MALT_BYOD 76ca4fcb-1590-4226-b2e7-6cd0affd93ef 802-11-wireless --
>> nmcli connection status
>> sudo rfkill list
Hors ligne
#9 Le 01/03/2018, à 17:19
- xubu1957
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
Lorsque vous avez un souci avec le wi-fi, postez, dans votre premier message,...
Je fais appliquer les instructions.
et aussi :
Plusieurs intérêts :
Faciliter la récolte des infos pour les débutants
Faciliter le travail de ceux qui apportent leur aide (questions redondantes, demandes de plus de précision,etc.)
Standardiser l'aspect des fils de discussions pour faciliter les comparaisons et les recherches
Tente :
sudo ifconfig enxe84e0635938d up
Dernière modification par xubu1957 (Le 01/03/2018, à 17:29)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#10 Le 01/03/2018, à 17:21
- NewLinux2018
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
Encore merci pour les infos.
Hors ligne
#11 Le 01/03/2018, à 17:40
- NewLinux2018
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
Pas d'erreur en retour de la commande, la led de la clé WIFI clignote à intervalle régulier.
La liste des accès WIFI est vide avec le message aucun réseau disponible
Hors ligne
#12 Le 01/03/2018, à 17:42
- xubu1957
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
Tu as plusieurs noyaux d'installés ?
Donne les noyaux présents :
dpkg -l | grep -Ei "linux-(g|h|i|lo|si|t)" | sort -k3 | tr -s " " | cut -d" " -s -f1,2,3 | column -s" " -t
Tu as un chiffrement WPA 2 seul, voir au § 1 > [Tuto] Pas de Wi-fi ? Eléments importants à vérifier
Dernière modification par xubu1957 (Le 01/03/2018, à 17:44)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#13 Le 01/03/2018, à 17:54
- NewLinux2018
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
L'installation de la distribution est toute fraîche de cette semaine.
Résultat de la commande
admposte@FRA-PST-Ubuntun:~$ dpkg -l | grep -Ei "linux-(g|h|i|lo|si|t)" | sort -k3 | tr -s " " | cut -d" " -s -f1,2,3 | column -s" " -t
ii linux-generic 4.4.0.116.122
ii linux-headers-generic 4.4.0.116.122
ii linux-image-generic 4.4.0.116.122
ii linux-headers-4.4.0-116 4.4.0-116.140
ii linux-image-extra-4.4.0-116-generic 4.4.0-116.140
ii linux-headers-4.4.0-116-generic 4.4.0-116.140
ii linux-image-4.4.0-116-generic 4.4.0-116.140
ii linux-headers-4.4.0-21 4.4.0-21.37
ii linux-image-extra-4.4.0-21-generic 4.4.0-21.37
ii linux-headers-4.4.0-21-generic 4.4.0-21.37
ii linux-image-4.4.0-21-generic 4.4.0-21.37
Hors ligne
#14 Le 01/03/2018, à 17:58
- xubu1957
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
J'ai édité mon message #12, tu as quel chiffrement sur la Box (ou le routeur) ?
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#15 Le 01/03/2018, à 18:05
- NewLinux2018
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
Résultat de la commande
admposte@FRA-PST-Ubuntun:~$ nmcli dev wifi
* SSID MODE CHAN RATE SIGNAL BARS SECURITY
En fait la liste des réseaux est vide pour le WIFI
Hors ligne
#16 Le 01/03/2018, à 18:10
- NewLinux2018
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
Sinon en chiffrement c'est WEP 2
Hors ligne
#17 Le 01/03/2018, à 18:23
- xubu1957
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
Fais voir :
dmesg | grep 8812
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#18 Le 01/03/2018, à 18:26
- NewLinux2018
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
Le résultat de la commande est longue :
admposte@FRA-PST-Ubuntun:~/rtl8812au$ dmesg | grep 8812
[ 18.102697] RTL871X: ReadChipVersion8812A SYS_CFG(0xF0)=0x04411535
[ 18.102818] RTL871X: _ConfigChipOutEP_8812 OutEpQueueSel(0x07), OutEpNumber(4)
[ 18.102819] RTL871X: ====> ReadAdapterInfo8812AU
[ 18.247949] RTL871X: hal_ReadMACAddress_8812AU MAC Address from EFUSE = e8:4e:06:35:93:8d
[ 18.247953] RTL871X: ==>mpt_GetChnlGroup8812A in 5G, but Channel 163 in Group not found
[ 18.247955] RTL871X: ==>mpt_GetChnlGroup8812A in 5G, but Channel 163 in Group not found
[ 18.247957] RTL871X: ==>mpt_GetChnlGroup8812A in 5G, but Channel 163 in Group not found
[ 18.247959] RTL871X: ==>mpt_GetChnlGroup8812A in 5G, but Channel 163 in Group not found
[ 18.248065] RTL871X: Hal_EfuseParseBTCoexistInfo8812A: BTCoexist=Disable, AntNum=1
[ 18.248070] RTL871X: Hal_ReadRemoteWakeup_8812A...bSupportRemoteWakeup(1)
[ 18.251564] RTL871X: ReadAdapterInfo8812AU <====
[ 18.293819] usbcore: registered new interface driver rtl8812au
[ 36.366828] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 36.431830] RTL871X: FirmwareDownload8812 fw source from Header
[ 36.431834] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 36.431836] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 36.473202] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 36.500954] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000602c6
[ 36.500958] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 36.526079] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 36.722458] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 36.722957] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 36.812083] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 36.813211] RTL871X: rtl8812au_hal_init in 452ms
[ 41.615911] RTL871X: rtl8812_set_FwJoinBssReport_cmd mstatus(0)
[ 41.635627] RTL871X: ==> rtl8812au_hal_deinit
[ 41.636616] RTL871X: hal_poweroff_8812au
[ 41.640492] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 41.644121] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 60.819639] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 60.886014] RTL871X: FirmwareDownload8812 fw source from Header
[ 60.886018] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 60.886020] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 60.928515] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 60.956265] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 60.956270] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 60.980645] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 61.178269] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 61.178771] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 61.268016] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 61.269143] RTL871X: rtl8812au_hal_init in 460ms
[ 65.583311] RTL871X: ==> rtl8812au_hal_deinit
[ 65.584298] RTL871X: hal_poweroff_8812au
[ 65.588424] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 65.591174] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 93.722516] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 93.787265] RTL871X: FirmwareDownload8812 fw source from Header
[ 93.787269] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 93.787272] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 93.830520] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 93.858313] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 32ms), REG_MCUFWDL:0x000606c6
[ 93.858329] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 93.882533] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 94.082283] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 94.082769] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 94.177145] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 94.178273] RTL871X: rtl8812au_hal_init in 468ms
[ 98.540085] RTL871X: ==> rtl8812au_hal_deinit
[ 98.542553] RTL871X: hal_poweroff_8812au
[ 98.546551] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 98.549425] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 136.726968] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 136.791216] RTL871X: FirmwareDownload8812 fw source from Header
[ 136.791221] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 136.791223] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 136.834215] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 136.861969] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (194, 28ms), REG_MCUFWDL:0x000606c6
[ 136.861975] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 136.886219] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 137.083483] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 137.083971] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 137.174592] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 137.175719] RTL871X: rtl8812au_hal_init in 456ms
[ 141.544767] RTL871X: ==> rtl8812au_hal_deinit
[ 141.545813] RTL871X: hal_poweroff_8812au
[ 141.549625] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 141.552502] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 189.724244] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 189.788527] RTL871X: FirmwareDownload8812 fw source from Header
[ 189.788533] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 189.788544] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 189.831004] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 189.858748] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 189.858755] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 189.882996] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 190.082497] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 190.083034] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 190.171747] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 190.172875] RTL871X: rtl8812au_hal_init in 456ms
[ 194.566302] RTL871X: ==> rtl8812au_hal_deinit
[ 194.567467] RTL871X: hal_poweroff_8812au
[ 194.571280] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 194.574030] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 252.742239] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 252.806474] RTL871X: FirmwareDownload8812 fw source from Header
[ 252.806479] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 252.806482] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 252.848097] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 252.875850] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 252.875857] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 252.900099] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 253.102264] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 253.102725] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 253.191600] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 253.192728] RTL871X: rtl8812au_hal_init in 456ms
[ 257.536397] RTL871X: ==> rtl8812au_hal_deinit
[ 257.537381] RTL871X: hal_poweroff_8812au
[ 257.541382] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 257.544133] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 315.755701] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 315.819953] RTL871X: FirmwareDownload8812 fw source from Header
[ 315.819958] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 315.819961] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 315.861448] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 315.889205] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 315.889211] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 315.913577] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 316.114204] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 316.114702] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 316.203578] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 316.204706] RTL871X: rtl8812au_hal_init in 456ms
[ 320.551627] RTL871X: ==> rtl8812au_hal_deinit
[ 320.552610] RTL871X: hal_poweroff_8812au
[ 320.556736] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 320.559517] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 378.714054] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 378.778304] RTL871X: FirmwareDownload8812 fw source from Header
[ 378.778309] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 378.778312] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 378.819802] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 378.847558] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (214, 28ms), REG_MCUFWDL:0x000606c6
[ 378.847565] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 378.871804] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 379.069306] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 379.069805] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 379.158680] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 379.159808] RTL871X: rtl8812au_hal_init in 452ms
[ 383.540357] RTL871X: ==> rtl8812au_hal_deinit
[ 383.541463] RTL871X: hal_poweroff_8812au
[ 383.545338] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 383.548089] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 441.748031] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 441.812282] RTL871X: FirmwareDownload8812 fw source from Header
[ 441.812286] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 441.812289] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 441.853782] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 441.881660] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (223, 28ms), REG_MCUFWDL:0x000606c6
[ 441.881667] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 441.905907] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 442.102409] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 442.102908] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 442.191689] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 442.192791] RTL871X: rtl8812au_hal_init in 452ms
[ 446.522205] RTL871X: ==> rtl8812au_hal_deinit
[ 446.523316] RTL871X: hal_poweroff_8812au
[ 446.527191] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 446.529941] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 504.761510] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 504.825760] RTL871X: FirmwareDownload8812 fw source from Header
[ 504.825765] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 504.825768] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 504.867508] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 504.895262] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 504.895268] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 504.919510] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 505.116139] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 505.116703] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 505.205511] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 505.206639] RTL871X: rtl8812au_hal_init in 452ms
[ 509.555934] RTL871X: ==> rtl8812au_hal_deinit
[ 509.556919] RTL871X: hal_poweroff_8812au
[ 509.560794] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 509.563544] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 567.734753] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 567.798989] RTL871X: FirmwareDownload8812 fw source from Header
[ 567.798994] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 567.798997] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 567.840485] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 567.868239] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 567.868244] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 567.892488] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 568.092740] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 568.093266] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 568.182115] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 568.183244] RTL871X: rtl8812au_hal_init in 456ms
[ 572.546286] RTL871X: ==> rtl8812au_hal_deinit
[ 572.547271] RTL871X: hal_poweroff_8812au
[ 572.551147] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 572.553898] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 630.755091] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 630.819715] RTL871X: FirmwareDownload8812 fw source from Header
[ 630.819720] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 630.819723] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 630.861089] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 630.888842] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 630.888848] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 630.913091] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 631.110717] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 631.111216] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 631.199968] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 631.201096] RTL871X: rtl8812au_hal_init in 452ms
[ 635.581535] RTL871X: ==> rtl8812au_hal_deinit
[ 635.582641] RTL871X: hal_poweroff_8812au
[ 635.586537] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 635.589252] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 693.710068] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 693.774318] RTL871X: FirmwareDownload8812 fw source from Header
[ 693.774324] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 693.774327] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 693.815817] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 693.843570] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (210, 32ms), REG_MCUFWDL:0x000606c6
[ 693.843576] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 693.867945] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 694.066195] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 694.066721] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 694.155604] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 694.156700] RTL871X: rtl8812au_hal_init in 452ms
[ 698.529743] RTL871X: ==> rtl8812au_hal_deinit
[ 698.530744] RTL871X: hal_poweroff_8812au
[ 698.534603] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 698.537354] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 756.756421] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 756.820673] RTL871X: FirmwareDownload8812 fw source from Header
[ 756.820679] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 756.820681] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 756.862420] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 756.890173] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (221, 32ms), REG_MCUFWDL:0x000606c6
[ 756.890179] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 756.914424] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 757.113298] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 757.113812] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 757.199946] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 757.201055] RTL871X: rtl8812au_hal_init in 452ms
[ 761.556470] RTL871X: ==> rtl8812au_hal_deinit
[ 761.557454] RTL871X: hal_poweroff_8812au
[ 761.561329] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 761.564082] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 819.708151] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 819.772400] RTL871X: FirmwareDownload8812 fw source from Header
[ 819.772405] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 819.772408] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 819.813775] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 819.841651] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (223, 32ms), REG_MCUFWDL:0x000606c6
[ 819.841658] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 819.865900] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 820.068152] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 820.068656] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 820.157658] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 820.158782] RTL871X: rtl8812au_hal_init in 456ms
[ 824.488614] RTL871X: ==> rtl8812au_hal_deinit
[ 824.489683] RTL871X: hal_poweroff_8812au
[ 824.493558] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 824.496309] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 882.731878] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 882.796128] RTL871X: FirmwareDownload8812 fw source from Header
[ 882.796133] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 882.796136] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 882.838000] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 882.865754] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 882.865761] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 882.890003] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 883.086755] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 883.087268] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 883.176177] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 883.177259] RTL871X: rtl8812au_hal_init in 452ms
[ 887.585205] RTL871X: ==> rtl8812au_hal_deinit
[ 887.586176] RTL871X: hal_poweroff_8812au
[ 887.590177] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 887.592915] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 945.709732] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 945.773980] RTL871X: FirmwareDownload8812 fw source from Header
[ 945.773986] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 945.773989] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 945.815478] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 945.843233] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 945.843241] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 945.867479] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 946.064983] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 946.065610] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 946.154983] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 946.156111] RTL871X: rtl8812au_hal_init in 452ms
[ 950.497153] RTL871X: ==> rtl8812au_hal_deinit
[ 950.498264] RTL871X: hal_poweroff_8812au
[ 950.502140] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 950.504891] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1008.756209] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1008.820460] RTL871X: FirmwareDownload8812 fw source from Header
[ 1008.820466] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1008.820469] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1008.862081] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1008.889834] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (221, 28ms), REG_MCUFWDL:0x000606c6
[ 1008.889840] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1008.914209] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1009.111585] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 1009.112212] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1009.201084] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1009.202213] RTL871X: rtl8812au_hal_init in 452ms
[ 1013.543132] RTL871X: ==> rtl8812au_hal_deinit
[ 1013.544140] RTL871X: hal_poweroff_8812au
[ 1013.547991] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1013.550746] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1065.668894] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1065.733766] RTL871X: FirmwareDownload8812 fw source from Header
[ 1065.733772] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1065.733775] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1065.775770] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1065.803390] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (220, 28ms), REG_MCUFWDL:0x000606c6
[ 1065.803396] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1065.827767] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1066.027393] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 1066.028022] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1066.117268] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1066.118395] RTL871X: rtl8812au_hal_init in 460ms
[ 1070.447565] RTL871X: ==> rtl8812au_hal_deinit
[ 1070.448707] RTL871X: hal_poweroff_8812au
[ 1070.452550] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1070.455300] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1128.709745] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1128.773992] RTL871X: FirmwareDownload8812 fw source from Header
[ 1128.773996] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1128.773999] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1128.816371] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1128.844246] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 1128.844253] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1128.868495] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1129.065495] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 1129.066125] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1129.155120] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1129.156248] RTL871X: rtl8812au_hal_init in 452ms
[ 1133.493057] RTL871X: ==> rtl8812au_hal_deinit
[ 1133.494244] RTL871X: hal_poweroff_8812au
[ 1133.498187] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1133.500905] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1191.755496] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1191.819973] RTL871X: FirmwareDownload8812 fw source from Header
[ 1191.819980] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1191.819983] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1191.861471] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1191.889226] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 1191.889234] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1191.913471] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1192.110976] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 1192.111511] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1192.200473] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1192.201602] RTL871X: rtl8812au_hal_init in 452ms
[ 1196.549272] RTL871X: ==> rtl8812au_hal_deinit
[ 1196.550256] RTL871X: hal_poweroff_8812au
[ 1196.554131] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1196.556882] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1254.725326] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1254.794581] RTL871X: FirmwareDownload8812 fw source from Header
[ 1254.794588] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1254.794591] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1254.836451] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1254.864327] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (223, 32ms), REG_MCUFWDL:0x000606c6
[ 1254.864334] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1254.888575] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1255.087575] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 1255.088074] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1255.174576] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1255.175704] RTL871X: rtl8812au_hal_init in 456ms
[ 1259.526373] RTL871X: ==> rtl8812au_hal_deinit
[ 1259.527384] RTL871X: hal_poweroff_8812au
[ 1259.531622] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1259.534360] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1317.762928] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1317.827557] RTL871X: FirmwareDownload8812 fw source from Header
[ 1317.827563] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1317.827565] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1317.869332] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1317.897179] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (223, 32ms), REG_MCUFWDL:0x000606c6
[ 1317.897186] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1317.921427] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1318.120806] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 1318.121304] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1318.211179] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1318.212308] RTL871X: rtl8812au_hal_init in 456ms
[ 1322.554977] RTL871X: ==> rtl8812au_hal_deinit
[ 1322.555962] RTL871X: hal_poweroff_8812au
[ 1322.559962] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1322.562963] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1380.712906] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1380.777282] RTL871X: FirmwareDownload8812 fw source from Header
[ 1380.777287] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1380.777291] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1380.818778] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1380.846534] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 1380.846540] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1380.870797] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1381.068157] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 1381.068785] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1381.157563] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1381.158664] RTL871X: rtl8812au_hal_init in 452ms
[ 1385.517706] RTL871X: ==> rtl8812au_hal_deinit
[ 1385.518688] RTL871X: hal_poweroff_8812au
[ 1385.522564] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1385.525314] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1443.758884] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1443.823759] RTL871X: FirmwareDownload8812 fw source from Header
[ 1443.823765] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1443.823768] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1443.865633] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1443.893386] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 32ms), REG_MCUFWDL:0x000606c6
[ 1443.893394] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1443.917634] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1444.115885] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 1444.116400] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1444.205135] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1444.206263] RTL871X: rtl8812au_hal_init in 456ms
[ 1448.557812] RTL871X: ==> rtl8812au_hal_deinit
[ 1448.558792] RTL871X: hal_poweroff_8812au
[ 1448.562667] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1448.565419] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1506.705736] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1506.769985] RTL871X: FirmwareDownload8812 fw source from Header
[ 1506.769991] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1506.769994] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1506.811484] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1506.839239] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 1506.839246] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1506.863486] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1507.063908] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 1507.064363] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1507.153113] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1507.154242] RTL871X: rtl8812au_hal_init in 456ms
[ 1511.558417] RTL871X: ==> rtl8812au_hal_deinit
[ 1511.559397] RTL871X: hal_poweroff_8812au
[ 1511.563397] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1511.566146] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1569.709464] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1569.773714] RTL871X: FirmwareDownload8812 fw source from Header
[ 1569.773718] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1569.773721] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1569.815238] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1569.843090] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (223, 32ms), REG_MCUFWDL:0x000606c6
[ 1569.843096] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1569.867465] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1570.067467] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 1570.067966] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1570.156716] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1570.157844] RTL871X: rtl8812au_hal_init in 456ms
[ 1574.493887] RTL871X: ==> rtl8812au_hal_deinit
[ 1574.494872] RTL871X: hal_poweroff_8812au
[ 1574.498748] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1574.501514] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1602.190211] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1602.254712] RTL871X: FirmwareDownload8812 fw source from Header
[ 1602.254717] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1602.254719] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1602.296459] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1602.324213] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 1602.324221] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1602.348591] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1602.546211] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 1602.546783] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1602.635471] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1602.636591] RTL871X: rtl8812au_hal_init in 456ms
[ 1606.981010] RTL871X: ==> rtl8812au_hal_deinit
[ 1606.981993] RTL871X: hal_poweroff_8812au
[ 1606.985994] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1606.988746] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1665.760823] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1665.825193] RTL871X: FirmwareDownload8812 fw source from Header
[ 1665.825199] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1665.825202] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1665.866566] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1665.894319] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 32ms), REG_MCUFWDL:0x000606c6
[ 1665.894325] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1665.918709] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1666.121570] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 1666.122069] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1666.213194] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1666.214449] RTL871X: rtl8812au_hal_init in 464ms
[ 1670.552133] RTL871X: ==> rtl8812au_hal_deinit
[ 1670.553103] RTL871X: hal_poweroff_8812au
[ 1670.557227] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1670.559979] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1728.747545] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1728.811796] RTL871X: FirmwareDownload8812 fw source from Header
[ 1728.811800] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1728.811803] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1728.853294] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1728.881072] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 32ms), REG_MCUFWDL:0x000606c6
[ 1728.881087] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1728.905420] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1729.104173] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 1729.104707] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1729.193549] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1729.194676] RTL871X: rtl8812au_hal_init in 456ms
[ 1733.579472] RTL871X: ==> rtl8812au_hal_deinit
[ 1733.580454] RTL871X: hal_poweroff_8812au
[ 1733.584455] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1733.587206] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1791.744275] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1791.808523] RTL871X: FirmwareDownload8812 fw source from Header
[ 1791.808527] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1791.808530] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1791.849896] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1791.877649] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 1791.877654] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1791.901898] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1792.099025] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 1792.099525] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1792.188275] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1792.189406] RTL871X: rtl8812au_hal_init in 452ms
[ 1796.548573] RTL871X: ==> rtl8812au_hal_deinit
[ 1796.549561] RTL871X: hal_poweroff_8812au
[ 1796.553557] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1796.556308] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1854.702503] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1854.766750] RTL871X: FirmwareDownload8812 fw source from Header
[ 1854.766754] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1854.766757] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1854.809249] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1854.837002] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (221, 28ms), REG_MCUFWDL:0x000606c6
[ 1854.837008] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1854.861376] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1855.058644] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 1855.059128] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1855.147877] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1855.149007] RTL871X: rtl8812au_hal_init in 452ms
[ 1859.496468] RTL871X: ==> rtl8812au_hal_deinit
[ 1859.497426] RTL871X: hal_poweroff_8812au
[ 1859.501410] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1859.504161] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1917.754730] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1917.818981] RTL871X: FirmwareDownload8812 fw source from Header
[ 1917.818988] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1917.818991] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1917.860852] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1917.888608] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (221, 28ms), REG_MCUFWDL:0x000606c6
[ 1917.888616] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1917.912982] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1918.112856] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 1918.113374] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1918.202231] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1918.203359] RTL871X: rtl8812au_hal_init in 456ms
[ 1922.577531] RTL871X: ==> rtl8812au_hal_deinit
[ 1922.578515] RTL871X: hal_poweroff_8812au
[ 1922.582390] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1922.585140] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 1980.753083] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 1980.817457] RTL871X: FirmwareDownload8812 fw source from Header
[ 1980.817462] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 1980.817465] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 1980.858956] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1980.886710] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (221, 28ms), REG_MCUFWDL:0x000606c6
[ 1980.886717] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 1980.911082] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 1981.107835] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 1981.108353] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 1981.197209] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 1981.198337] RTL871X: rtl8812au_hal_init in 452ms
[ 1985.560682] RTL871X: ==> rtl8812au_hal_deinit
[ 1985.561616] RTL871X: hal_poweroff_8812au
[ 1985.565491] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 1985.568278] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 2043.742810] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 2043.807060] RTL871X: FirmwareDownload8812 fw source from Header
[ 2043.807066] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 2043.807069] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 2043.848559] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2043.876313] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 2043.876320] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 2043.900560] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 2044.098311] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 2044.098811] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 2044.187688] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 2044.188816] RTL871X: rtl8812au_hal_init in 456ms
[ 2048.515303] RTL871X: ==> rtl8812au_hal_deinit
[ 2048.516233] RTL871X: hal_poweroff_8812au
[ 2048.520094] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2048.522911] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 2106.698913] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 2106.763163] RTL871X: FirmwareDownload8812 fw source from Header
[ 2106.763168] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 2106.763171] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 2106.805036] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2106.832790] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 32ms), REG_MCUFWDL:0x000606c6
[ 2106.832797] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 2106.857164] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 2107.056082] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 2107.056539] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 2107.145414] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 2107.146543] RTL871X: rtl8812au_hal_init in 456ms
[ 2111.516101] RTL871X: ==> rtl8812au_hal_deinit
[ 2111.517071] RTL871X: hal_poweroff_8812au
[ 2111.520946] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2111.523698] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 2169.732642] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 2169.796890] RTL871X: FirmwareDownload8812 fw source from Header
[ 2169.796895] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 2169.796898] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 2169.838406] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2169.866146] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (221, 32ms), REG_MCUFWDL:0x000606c6
[ 2169.866152] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 2169.890516] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 2170.090393] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 2170.090892] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 2170.179767] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 2170.180896] RTL871X: rtl8812au_hal_init in 456ms
[ 2174.521324] RTL871X: ==> rtl8812au_hal_deinit
[ 2174.522436] RTL871X: hal_poweroff_8812au
[ 2174.526378] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2174.529051] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 2232.721243] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 2232.785619] RTL871X: FirmwareDownload8812 fw source from Header
[ 2232.785625] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 2232.785627] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 2232.829117] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2232.856871] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 32ms), REG_MCUFWDL:0x000606c6
[ 2232.856878] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 2232.881120] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 2233.079745] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 2233.080268] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 2233.176254] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 2233.177377] RTL871X: rtl8812au_hal_init in 464ms
[ 2237.527667] RTL871X: ==> rtl8812au_hal_deinit
[ 2237.528653] RTL871X: hal_poweroff_8812au
[ 2237.532545] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2237.535281] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 2295.734347] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 2295.798613] RTL871X: FirmwareDownload8812 fw source from Header
[ 2295.798619] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 2295.798622] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 2295.839970] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2295.867723] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (221, 28ms), REG_MCUFWDL:0x000606c6
[ 2295.867729] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 2295.892098] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 2296.089474] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 2296.090000] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 2296.185788] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 2296.186853] RTL871X: rtl8812au_hal_init in 460ms
[ 2300.561895] RTL871X: ==> rtl8812au_hal_deinit
[ 2300.562881] RTL871X: hal_poweroff_8812au
[ 2300.566756] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2300.569507] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 2358.749949] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 2358.814200] RTL871X: FirmwareDownload8812 fw source from Header
[ 2358.814206] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 2358.814209] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 2358.855573] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2358.883328] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 32ms), REG_MCUFWDL:0x000606c6
[ 2358.883335] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 2358.907575] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 2359.106452] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 2359.106951] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 2359.201701] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 2359.202830] RTL871X: rtl8812au_hal_init in 460ms
[ 2363.624002] RTL871X: ==> rtl8812au_hal_deinit
[ 2363.624984] RTL871X: hal_poweroff_8812au
[ 2363.628859] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2363.631610] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
[ 2421.714302] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=1
[ 2421.778551] RTL871X: FirmwareDownload8812 fw source from Header
[ 2421.778555] RTL871X: FirmwareDownload8812 fw:NIC, size: 28662
[ 2421.778558] RTL871X: FirmwareDownload8812: fw_ver=28 fw_subver=0 sig=0x2101
[ 2421.820073] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2421.847803] RTL871X: _FWFreeToGo8812: Polling FW ready OK! (222, 28ms), REG_MCUFWDL:0x000606c6
[ 2421.847809] RTL871X: rtl8812au_hal_init: Download Firmware Success!!
[ 2421.872053] RTL871X: ===> phy_BB8812_Config_ParaFile() EEPROMRegulatory 0
[ 2422.072806] RTL871X: ==> _InitAntenna_Selection_8812A ....
[ 2422.073304] RTL871X: _InitAntenna_Selection_8812A,Cur_ant:(2)AUX_ANT
[ 2422.171054] RTL871X: rtl8812a_combo_card_WifiOnlyHwInit !
[ 2422.172313] RTL871X: rtl8812au_hal_init in 468ms
[ 2426.550852] RTL871X: ==> rtl8812au_hal_deinit
[ 2426.551836] RTL871X: hal_poweroff_8812au
[ 2426.555837] RTL871X: =====> _8051Reset8812(): 8051 reset success .
[ 2426.558588] RTL871X: SetHwReg8812A: bMacPwrCtrlOn=0
Hors ligne
#19 Le 01/03/2018, à 18:40
- xubu1957
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#20 Le 01/03/2018, à 18:43
- NewLinux2018
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
admposte@FRA-PST-Ubuntun:~/rtl8812au$ modinfo 8812au | grep -i version
version: v4.2.2_7502.20130517
srcversion: E96B8D9016B150E0F37C9AE
vermagic: 4.4.0-116-generic SMP mod_unload modversions retpoline
parm: rtw_chip_version:int
Hors ligne
#21 Le 01/03/2018, à 19:02
- xubu1957
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
Dans ton message # 1:
v4.3.14_13455.20150212_BTCOEX20150128-51/core/rtw_cmd.o] Error 1
et au #20 :
v4.2.2_7502.20130517
Une version ancienne du pilote wifi, est installée.
(edit=messages regroupés)
_ _ _
En s'inspirant de :
You STILL have the wrong driver installed. We'll have to struggle a bit to remove it.
Vous avez toujours le mauvais pilote installé. Nous allons devoir lutter un peu pour l'enlever.cd ~/Documents/linux/driver/rtl8821AU_linux_v4.3.14_13455.20150212_BTCOEX20150128-51 sudo make uninstall
Il faudrait supprimer le pilote ancien avec sa référence.
_ _ _
Vu la Doc > wifi_chipset_realtek_rtl8812au
Avant de pouvoir essayer :
sudo apt-get update && sudo apt-get install rtl8812au-dkms
Dernière modification par xubu1957 (Le 01/03/2018, à 19:24)
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#22 Le 01/03/2018, à 19:41
- NewLinux2018
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
J'ai juste saisie cette commande pour l'instant et voici le résultat
Est-ce que je dois faire aussi les commandes en début de message ?
admposte@FRA-PST-Ubuntun:~$ sudo apt-get update && sudo apt-get install rtl8812au-dkms
[sudo] password for admposte:
Atteint:1 http://ppa.launchpad.net/noobslab/macbuntu/ubuntu xenial InRelease
Ign:2 http://dl.google.com/linux/chrome/deb stable InRelease
Atteint:3 http://ppa.launchpad.net/webupd8team/y-ppa-manager/ubuntu xenial InRelease
Atteint:4 http://dl.google.com/linux/chrome/deb stable Release
Atteint:5 http://es-mirrors.evowise.com/ubuntu xenial InRelease
Atteint:6 http://es-mirrors.evowise.com/ubuntu xenial-updates InRelease
Atteint:7 http://es-mirrors.evowise.com/ubuntu xenial-backports InRelease
Atteint:8 http://es-mirrors.evowise.com/ubuntu xenial-security InRelease
Lecture des listes de paquets... Fait
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
The following additional packages will be installed:
dkms
Les NOUVEAUX paquets suivants seront installés :
dkms rtl8812au-dkms
0 mis à jour, 2 nouvellement installés, 0 à enlever et 0 non mis à jour.
Il est nécessaire de prendre 1 090 ko dans les archives.
Après cette opération, 8 044 ko d'espace disque supplémentaires seront utilisés.
Souhaitez-vous continuer ? [Y/n] y
Réception de:1 http://es-mirrors.evowise.com/ubuntu xenial-updates/main amd64 dkms all 2.2.0.3-2ubuntu11.5 [66,3 kB]
Réception de:2 http://es-mirrors.evowise.com/ubuntu xenial/universe amd64 rtl8812au-dkms all 4.3.8.12175.20140902+dfsg-0ubuntu2 [1 024 kB]
1 090 ko réceptionnés en 0s (2 266 ko/s)
Sélection du paquet dkms précédemment désélectionné.
(Lecture de la base de données... 203726 fichiers et répertoires déjà installés.)
Préparation du dépaquetage de .../dkms_2.2.0.3-2ubuntu11.5_all.deb ...
Dépaquetage de dkms (2.2.0.3-2ubuntu11.5) ...
Sélection du paquet rtl8812au-dkms précédemment désélectionné.
Préparation du dépaquetage de .../rtl8812au-dkms_4.3.8.12175.20140902+dfsg-0ubuntu2_all.deb ...
Dépaquetage de rtl8812au-dkms (4.3.8.12175.20140902+dfsg-0ubuntu2) ...
Traitement des actions différées (« triggers ») pour man-db (2.7.5-1) ...
Paramétrage de dkms (2.2.0.3-2ubuntu11.5) ...
Paramétrage de rtl8812au-dkms (4.3.8.12175.20140902+dfsg-0ubuntu2) ...
Loading new rtl8812au-4.3.8.12175.20140902+dfsg DKMS files...
First Installation: checking all kernels...
Building only for 4.4.0-116-generic
Building initial module for 4.4.0-116-generic
Done.
8812au:
Running module version sanity check.
- Original module
- Installation
- Installing to /lib/modules/4.4.0-116-generic/updates/dkms/
depmod....
DKMS: install completed.
Hors ligne
#23 Le 01/03/2018, à 19:54
- NewLinux2018
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
Dès les premières commande de saisie la clé était bien vu et je pouvais voir la liste de SSID disponible, et maintenant la clé est toujours vu dans les paramétres mais n'affiche plus de liste de SSID.
Entre j'ai éteint et redémarré le système
Encore merci pour ces efforts
Hors ligne
#24 Le 01/03/2018, à 19:54
- xubu1957
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
Tu n'as toujours pas de wifi ?
Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci. Membre de Linux-Azur
En ligne
#25 Le 01/03/2018, à 19:58
- NewLinux2018
Re : [Résolu] Clé WIFI EDUP (RTL8811AU)
Non toujours pas malheureusement
Hors ligne