Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 04/03/2018, à 10:44

gerard33

Souris qui se bloque

Bonjour

J'ai une souris Logitech qui n'arrête pas de se figer !
Je suis obligé de fermer par le bouton M/A à chaque fois !

Hier j'ai fait un

sudo apt full-upgrade

Résultat, plus de 500 MAJ !!

Pourtant, ça n'a pas résolu ce problème !

Quand elle se bloque, (ça arrive n'importe quand et souvent) le pointeur se transforme en "tiret" vertical, un peu comme un i majuscule avec une petite barre horizontale en haut et en bas du I

Une idée sur le sujet et comment y remédier ?

Dernière modification par gerard33 (Le 04/03/2018, à 10:47)

Hors ligne

#2 Le 04/03/2018, à 10:47

xubu1957

Re : Souris qui se bloque

Bonjour,

As-tu consulté la Doc souris ?

Donne :

cat /proc/bus/input/devices | grep MOUSE && lsusb

_ _ _

Je suis obligé de fermer par le bouton M/A à chaque fois !

Tu peux utiliser les touches_magiques#procedure_pour_redemarrer_votre_machine.

Dernière modification par xubu1957 (Le 04/03/2018, à 10:50)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#3 Le 04/03/2018, à 10:51

nam1962

Re : Souris qui se bloque

Donne-nous :

cat /etc/apt/sources.list
ls /etc/apt/sources.list.d -1

500 mises à jour signifie que tu avais du oublier de les faire pendant un bout de temps tongue
Profites-en pour passer l'aspirateur :

sudo apt clean -v
[[ $(dpkg -l | grep ^rc) ]] && sudo dpkg -P $(dpkg -l | grep ^rc | tr -s " " | cut -d " " -f 2)
sudo apt autoremove --purge

Dernière modification par nam1962 (Le 04/03/2018, à 10:51)


[ Modéré ]

Hors ligne

#4 Le 04/03/2018, à 10:54

xubu1957

Re : Souris qui se bloque

nam1962 a écrit :

500 mises à jour signifie que tu avais du oublier de les faire pendant un bout de temps tongue

voir > Pas de wifi


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#5 Le 04/03/2018, à 10:55

gerard33

Re : Souris qui se bloque

Merci ! tu es allé plus vite que moi, j'étais en train de modifier mon message !!
je disais que j'avais fait un upgrade de plus de 500 MAJ, regarde plus haut !
Je ne connaissais pas cette doc, mais je découvre l'univers Linux petit à petit !!

Je suis sous Xubuntu 16.4 LTS, et vu les blocages fréquents, quelle serait la meilleure solution (rapide et surtout simple) pour remédier à ce problème ?

Là, vu le problème, et pour communiquer sur le forum, je suis sous windows !!

Hors ligne

#6 Le 04/03/2018, à 10:59

xubu1957

Re : Souris qui se bloque

Sinon, tu peux utiliser une clé USB pour copier les commandes sur un fichier texte, et retour des résultats récupérés dans le terminal, au moyen de la clé.

Tu n'as pas une autre souris ?

Dernière modification par xubu1957 (Le 04/03/2018, à 11:00)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#7 Le 04/03/2018, à 11:00

nam1962

Re : Souris qui se bloque

Passe déjà le #3.

Donne nous en plus :

sudo dmidecode -t 16
sudo dmidecode -t 17

Et optimise la gestion de mémoire avec ces 3 commandes :

echo vm.swappiness=5 | sudo tee /etc/sysctl.d/99-swappiness.conf
echo vm.vfs_cache_pressure=50 | sudo tee -a /etc/sysctl.d/99-swappiness.conf
sudo sysctl -p /etc/sysctl.d/99-swappiness.conf

(explications [url=[modéré : pas d’auto-pub, merci]-gestion-ram-swap-linux/]là[/url] )


[ Modéré ]

Hors ligne

#8 Le 04/03/2018, à 11:37

gerard33

Re : Souris qui se bloque

Alors voila les résultats pour

sudo dmidecode -t 16
sudo dmidecode -t 17

cela donne :

sudo dmidecode -t 16
# dmidecode 3.0
Getting SMBIOS data from sysfs.
SMBIOS 2.7 present.
Handle 0x002C, DMI type 16, 23 bytes
Physical Memory Array
	Location: System Board Or Motherboard
	Use: System Memory
	Error Correction Type: None
	Maximum Capacity: 32 GB
	Error Information Handle: Not Provided
	Number Of Devices: 4
sudo dmidecode -t 17
gerard@gerard-desktop:~/Bureau$ sudo dmidecode -t 16
[sudo] Mot de passe de gerard : 
# dmidecode 3.0
Getting SMBIOS data from sysfs.
SMBIOS 2.7 present.
Handle 0x002C, DMI type 16, 23 bytes
Physical Memory Array
	Location: System Board Or Motherboard
	Use: System Memory
	Error Correction Type: None
	Maximum Capacity: 32 GB
	Error Information Handle: Not Provided
	Number Of Devices: 4

gerard@gerard-desktop:~/Bureau$ sudo dmidecode -t 17
# dmidecode 3.0
Getting SMBIOS data from sysfs.
SMBIOS 2.7 present.

Handle 0x002E, DMI type 17, 34 bytes
Memory Device
	Array Handle: 0x002C
	Error Information Handle: Not Provided
	Total Width: Unknown
	Data Width: 64 bits
	Size: No Module Installed
	Form Factor: DIMM
	Set: None
	Locator: DIMM0
	Bank Locator: BANK0
	Type: Unknown
	Type Detail: Synchronous
	Speed: Unknown
	Manufacturer: Manufacturer0
	Serial Number: SerNum0
	Asset Tag: AssetTagNum0
	Part Number: Array1_PartNumber0
	Rank: Unknown
	Configured Clock Speed: Unknown

Handle 0x0030, DMI type 17, 34 bytes
Memory Device
	Array Handle: 0x002C
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 4096 MB
	Form Factor: DIMM
	Set: None
	Locator: DIMM1
	Bank Locator: BANK1
	Type: DDR3
	Type Detail: Synchronous Unbuffered (Unregistered)
	Speed: 1866 MHz
	Manufacturer: Kingston     
	Serial Number: 6E0EE1F
	Asset Tag: AssetTagNum1
	Part Number: KHX1866C10D3/4G   
	Rank: 2
	Configured Clock Speed: 933 MHz
Handle 0x0032, DMI type 17, 34 bytes
Memory Device
	Array Handle: 0x002C
	Error Information Handle: Not Provided
	Total Width: Unknown
	Data Width: 64 bits
	Size: No Module Installed
	Form Factor: DIMM
	Set: None
	Locator: DIMM2
	Bank Locator: BANK2
	Type: Unknown
	Type Detail: Synchronous
	Speed: Unknown
	Manufacturer: Manufacturer2
	Serial Number: SerNum2
	Asset Tag: AssetTagNum2
	Part Number: Array1_PartNumber2
	Rank: Unknown
	Configured Clock Speed: Unknown
Handle 0x0034, DMI type 17, 34 bytes
Memory Device
	Array Handle: 0x002C
	Error Information Handle: Not Provided
	Total Width: 64 bits
	Data Width: 64 bits
	Size: 4096 MB
	Form Factor: DIMM
	Set: None
	Locator: DIMM3
	Bank Locator: BANK3
	Type: DDR3
	Type Detail: Synchronous Unbuffered (Unregistered)
	Speed: 1866 MHz
	Manufacturer: Kingston     
	Serial Number: 6D0E05F
	Asset Tag: AssetTagNum3
	Part Number: KHX1866C10D3/4G   
	Rank: 2
	Configured Clock Speed: 933 MHz
gerard@gerard-desktop:~/Bureau$ 

Je rajoute que j'ai un problème de RAM:
J'ai 2 barettes de 4Go, mais 4Go vu par Linux !

Windows voit les 8Go, mais 3.9 utilisable !
Comme j'ai testé mes barrettes une par une sur chaque slot, et que mon BIOS est à jour ...

Hors ligne

#9 Le 04/03/2018, à 11:54

nam1962

Re : Souris qui se bloque

Là on voit bien tes deux barrettes, donne

free -m

As-tu un DVD ou une clef USB pour faire un memtest ?
As-tu réglé la swappiness comme indiqué ?


[ Modéré ]

Hors ligne

#10 Le 04/03/2018, à 14:31

gerard33

Re : Souris qui se bloque

une clé usb oui, taille mini pour ça ?
Le swappiness, comme c'est un SSD, et ils disent:

SSD et swap ne sont pas très copains..
Si vous utilisez un SSD, swapper activement dessus peut-être rapidement fatal.

J'ai un SSD et le swap ... je ne sais pas !!

la commande

free -m

je vais la faire !

Hors ligne

#11 Le 04/03/2018, à 14:43

inbox

Re : Souris qui se bloque

Salut,

Il faudrait aussi le retour de :

lspci
lsmod

A+


Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#12 Le 04/03/2018, à 14:45

gerard33

Re : Souris qui se bloque

Bon, j'ai pas eu le temps de faire un copié/collé, souris bloquée !!!
J'ai noté :
Mémoire totale  3852
Utilisé  343
Libre  2822
Partagé  16
Tamp/cache  686
Disponible  3249
Partition échange  0 (partout)

Aussitôt arrivé sur le bureau j'ai eu une petite fenêtre qui disait :

Problème logiciel détecté
Voulez vous signaler le problème maintenant ?

Je l'ai fait, mais je sais pas si ça a fonctionné !!

Hors ligne

#13 Le 04/03/2018, à 15:00

gerard33

Re : Souris qui se bloque

J'ai eu une petite frayeur, écran noir après le grub !!
J'ai re booté, et ça a marché !

Voila les résultats pour lspci et lsmod

gerard@gerard-desktop:~/Bureau$ lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B)
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port D)
00:05.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port E)
00:07.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port G)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Barts PRO [Radeon HD 6850]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Barts HDMI Audio [Radeon HD 6800 Series]
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 09)
03:00.0 USB controller: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller
04:00.0 USB controller: ASMedia Technology Inc. ASM1042A USB 3.0 Host Controller
05:05.0 Ethernet controller: Qualcomm Atheros AR2413/AR2414 Wireless Network Adapter [AR5005G(S) 802.11bg] (rev 01)
gerard@gerard-desktop:~/Bureau$ 


gerard@gerard-desktop:~/Bureau$ lsmod
Module                  Size  Used by
drbg                   32768  1
ansi_cprng             16384  0
ctr                    16384  1
ccm                    20480  1
arc4                   16384  2
snd_hrtimer            16384  1
eeepc_wmi              16384  0
asus_wmi               28672  1 eeepc_wmi
sparse_keymap          16384  1 asus_wmi
video                  40960  1 asus_wmi
kvm_amd                65536  0
kvm                   548864  1 kvm_amd
ath5k                 147456  0
ath                    32768  1 ath5k
irqbypass              16384  1 kvm
crct10dif_pclmul       16384  0
mac80211              737280  1 ath5k
crc32_pclmul           16384  0
ghash_clmulni_intel    16384  0
aesni_intel           167936  2
aes_x86_64             20480  1 aesni_intel
snd_hda_codec_realtek    90112  1
lrw                    16384  1 aesni_intel
gf128mul               16384  1 lrw
glue_helper            16384  1 aesni_intel
joydev                 20480  0
input_leds             16384  0
ablk_helper            16384  1 aesni_intel
cryptd                 20480  3 ghash_clmulni_intel,aesni_intel,ablk_helper
snd_hda_codec_generic    77824  1 snd_hda_codec_realtek
cfg80211              565248  3 ath,ath5k,mac80211
snd_hda_codec_hdmi     53248  1
snd_hda_intel          40960  5
fam15h_power           16384  0
snd_hda_codec         135168  4 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel
edac_mce_amd           24576  0
serio_raw              16384  0
edac_core              53248  0
k10temp                16384  0
snd_hda_core           77824  5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
snd_hwdep              16384  1 snd_hda_codec
snd_seq_midi           16384  0
snd_seq_midi_event     16384  1 snd_seq_midi
snd_rawmidi            32768  1 snd_seq_midi
snd_pcm               106496  4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_core
snd_seq                69632  3 snd_seq_midi_event,snd_seq_midi
i2c_piix4              24576  0
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer              32768  3 snd_hrtimer,snd_pcm,snd_seq
snd                    81920  22 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel,snd_seq_device
soundcore              16384  1 snd
shpchp                 36864  0
tpm_infineon           20480  0
8250_fintek            16384  0
mac_hid                16384  0
binfmt_misc            20480  1
parport_pc             32768  0
ppdev                  20480  0
lp                     20480  0
parport                49152  3 lp,ppdev,parport_pc
autofs4                40960  2
hid_generic            16384  0
usbhid                 49152  0
hid                   122880  2 hid_generic,usbhid
amdkfd                131072  1
amd_iommu_v2           20480  1 amdkfd
radeon               1523712  3
mxm_wmi                16384  0
i2c_algo_bit           16384  1 radeon
ttm                    98304  1 radeon
psmouse               131072  0
drm_kms_helper        155648  1 radeon
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
ahci                   36864  1
drm                   364544  6 ttm,drm_kms_helper,radeon
libahci                32768  1 ahci
r8169                  86016  0
mii                    16384  1 r8169
fjes                   28672  0
wmi                    20480  2 mxm_wmi,asus_wmi
gerard@gerard-desktop:~/Bureau$ 

Dernière modification par gerard33 (Le 04/03/2018, à 15:04)

Hors ligne

#14 Le 04/03/2018, à 15:17

nam1962

Re : Souris qui se bloque

L'une de tes barrettes doit être naze.
2Go mini pour la clef.
Si tu as un SSD, modif des commandes proposées :

echo vm.swappiness=1 | sudo tee /etc/sysctl.d/99-swappiness.conf
echo vm.vfs_cache_pressure=50 | sudo tee -a /etc/sysctl.d/99-swappiness.conf
sudo sysctl -p /etc/sysctl.d/99-swappiness.conf

(explication [url=[modéré : pas d’auto-pub, merci]/]ici[/url] )


[ Modéré ]

Hors ligne

#15 Le 04/03/2018, à 15:21

inbox

Re : Souris qui se bloque

Rien de problématique au niveau graphique.

Donne aussi le retour de :

dmesg

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#16 Le 04/03/2018, à 15:32

nam1962

Re : Souris qui se bloque

@inbox : le symptôme, 8G vus, 4Go reconnus quelque soit l'OS sent le problème matériel !


[ Modéré ]

Hors ligne

#17 Le 04/03/2018, à 15:37

inbox

Re : Souris qui se bloque

C'est possible. Le dmesg nous dira peut être de quoi il retourne ?

Il faudrait aussi le résultat de :

sudo lshw -C memory

Dernière modification par inbox (Le 04/03/2018, à 15:39)


Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#18 Le 04/03/2018, à 15:38

nam1962

Re : Souris qui se bloque

On peut toujours regarder


[ Modéré ]

Hors ligne

#19 Le 04/03/2018, à 15:55

gerard33

Re : Souris qui se bloque

Je viens d'échanger la souris, ça semble fonctionner !!
En tout cas j'ai fait "dmesg"
Voila le résultat

[    0.425734] cpuidle: using governor menu
[    0.425737] PCCT header not found.
[    0.425813] ACPI: bus type PCI registered
[    0.425815] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.425879] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.425881] PCI: not using MMCONFIG
[    0.425882] PCI: Using configuration type 1 for base access
[    0.425883] PCI: Using configuration type 1 for extended access
[    0.438126] ACPI: Added _OSI(Module Device)
[    0.438128] ACPI: Added _OSI(Processor Device)
[    0.438129] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.438130] ACPI: Added _OSI(Processor Aggregator Device)
[    0.439323] ACPI: Executed 2 blocks of module-level executable AML code
[    0.441353] ACPI : EC: EC started
[    0.441358] ACPI: Interpreter enabled
[    0.441372] ACPI: (supports S0 S3 S4 S5)
[    0.441373] ACPI: Using IOAPIC for interrupt routing
[    0.441493] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.441522] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.441532] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.446446] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.446451] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.446455] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.446720] PCI host bridge to bus 0000:00
[    0.446722] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.446724] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.446726] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.446728] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.446730] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.446731] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.446733] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[    0.446735] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.446746] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[    0.446876] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[    0.446927] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.446968] pci 0000:00:02.0: System wakeup disabled by ACPI
[    0.447006] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[    0.447052] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.447093] pci 0000:00:04.0: System wakeup disabled by ACPI
[    0.447130] pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
[    0.447175] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.447217] pci 0000:00:05.0: System wakeup disabled by ACPI
[    0.447255] pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
[    0.447331] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.447371] pci 0000:00:07.0: System wakeup disabled by ACPI
[    0.447420] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.447445] pci 0000:00:11.0: reg 0x10: [io  0xf040-0xf047]
[    0.447454] pci 0000:00:11.0: reg 0x14: [io  0xf030-0xf033]
[    0.447462] pci 0000:00:11.0: reg 0x18: [io  0xf020-0xf027]
[    0.447471] pci 0000:00:11.0: reg 0x1c: [io  0xf010-0xf013]
[    0.447480] pci 0000:00:11.0: reg 0x20: [io  0xf000-0xf00f]
[    0.447489] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff]
[    0.447583] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.447598] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
[    0.447686] pci 0000:00:12.0: System wakeup disabled by ACPI
[    0.447725] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.447749] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
[    0.447815] pci 0000:00:12.2: supports D1 D2
[    0.447817] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.447857] pci 0000:00:12.2: System wakeup disabled by ACPI
[    0.447898] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.447913] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
[    0.447999] pci 0000:00:13.0: System wakeup disabled by ACPI
[    0.448039] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.448063] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
[    0.448129] pci 0000:00:13.2: supports D1 D2
[    0.448131] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.448172] pci 0000:00:13.2: System wakeup disabled by ACPI
[    0.448213] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.448342] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.448368] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
[    0.448424] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.448463] pci 0000:00:14.2: System wakeup disabled by ACPI
[    0.448528] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.448655] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.448722] pci 0000:00:14.4: System wakeup disabled by ACPI
[    0.448757] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.448772] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
[    0.448859] pci 0000:00:14.5: System wakeup disabled by ACPI
[    0.448896] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.448911] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff]
[    0.448998] pci 0000:00:16.0: System wakeup disabled by ACPI
[    0.449037] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.449061] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff]
[    0.449126] pci 0000:00:16.2: supports D1 D2
[    0.449128] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.449168] pci 0000:00:16.2: System wakeup disabled by ACPI
[    0.449208] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    0.449290] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    0.449365] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    0.449443] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    0.449524] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    0.449601] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    0.449879] pci 0000:01:00.0: [1002:6739] type 00 class 0x030000
[    0.449911] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.449924] pci 0000:01:00.0: reg 0x18: [mem 0xfea20000-0xfea3ffff 64bit]
[    0.449933] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.449949] pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref]
[    0.449981] pci 0000:01:00.0: supports D1 D2
[    0.450037] pci 0000:01:00.1: [1002:aa88] type 00 class 0x040300
[    0.450067] pci 0000:01:00.1: reg 0x10: [mem 0xfea40000-0xfea43fff 64bit]
[    0.450135] pci 0000:01:00.1: supports D1 D2
[    0.457743] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.457748] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.457750] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.457755] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.457950] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.457983] pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.458007] pci 0000:02:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
[    0.458022] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
[    0.458079] pci 0000:02:00.0: supports D1 D2
[    0.458080] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.465741] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.465746] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    0.465751] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.465805] pci 0000:03:00.0: [1b21:1142] type 00 class 0x0c0330
[    0.465841] pci 0000:03:00.0: reg 0x10: [mem 0xfe900000-0xfe907fff 64bit]
[    0.465935] pci 0000:03:00.0: PME# supported from D3cold
[    0.473739] pci 0000:00:05.0: PCI bridge to [bus 03]
[    0.473745] pci 0000:00:05.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.473801] pci 0000:04:00.0: [1b21:1142] type 00 class 0x0c0330
[    0.473838] pci 0000:04:00.0: reg 0x10: [mem 0xfe800000-0xfe807fff 64bit]
[    0.473931] pci 0000:04:00.0: PME# supported from D3cold
[    0.481739] pci 0000:00:07.0: PCI bridge to [bus 04]
[    0.481745] pci 0000:00:07.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.481792] pci 0000:05:05.0: [168c:001a] type 00 class 0x020000
[    0.481822] pci 0000:05:05.0: reg 0x10: [mem 0xfe700000-0xfe70ffff]
[    0.481977] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
[    0.481983] pci 0000:00:14.4:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.481987] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.481989] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.481990] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    0.481992] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.481993] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.481995] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.481997] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
[    0.482334] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[    0.482388] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[    0.482444] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[    0.482498] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
[    0.482559] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[    0.482593] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[    0.482628] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[    0.482662] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[    0.482762] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.482800] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[    0.482895] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.482897] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.482898] vgaarb: loaded
[    0.482899] vgaarb: bridge control possible 0000:01:00.0
[    0.483109] SCSI subsystem initialized
[    0.483149] libata version 3.00 loaded.
[    0.483170] ACPI: bus type USB registered
[    0.483185] usbcore: registered new interface driver usbfs
[    0.483194] usbcore: registered new interface driver hub
[    0.483215] usbcore: registered new device driver usb
[    0.483358] PCI: Using ACPI for IRQ routing
[    0.491522] PCI: pci_cache_line_size set to 64 bytes
[    0.491585] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.491586] e820: reserve RAM buffer [mem 0xba86c000-0xbbffffff]
[    0.491587] e820: reserve RAM buffer [mem 0xbca37000-0xbfffffff]
[    0.491589] e820: reserve RAM buffer [mem 0xbd083000-0xbfffffff]
[    0.491590] e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff]
[    0.491591] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[    0.491687] NetLabel: Initializing
[    0.491688] NetLabel:  domain hash size = 128
[    0.491689] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.491698] NetLabel:  unlabeled traffic allowed by default
[    0.491756] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.491759] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.493804] clocksource: Switched to clocksource hpet
[    0.499906] AppArmor: AppArmor Filesystem Enabled
[    0.499955] pnp: PnP ACPI init
[    0.500046] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.500049] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.500268] system 00:01: [io  0x040b] has been reserved
[    0.500270] system 00:01: [io  0x04d6] has been reserved
[    0.500272] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.500274] system 00:01: [io  0x0c14] has been reserved
[    0.500276] system 00:01: [io  0x0c50-0x0c51] has been reserved
[    0.500277] system 00:01: [io  0x0c52] has been reserved
[    0.500279] system 00:01: [io  0x0c6c] has been reserved
[    0.500281] system 00:01: [io  0x0c6f] has been reserved
[    0.500283] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.500284] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.500286] system 00:01: [io  0x0cd4-0x0cd5] has been reserved
[    0.500288] system 00:01: [io  0x0cd6-0x0cd7] has been reserved
[    0.500290] system 00:01: [io  0x0cd8-0x0cdf] has been reserved
[    0.500292] system 00:01: [io  0x0800-0x089f] could not be reserved
[    0.500293] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    0.500295] system 00:01: [io  0x0900-0x090f] has been reserved
[    0.500297] system 00:01: [io  0x0910-0x091f] has been reserved
[    0.500299] system 00:01: [io  0xfe00-0xfefe] has been reserved
[    0.500302] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.500304] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.500306] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.500308] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.500310] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.500312] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[    0.500314] system 00:01: [mem 0xff800000-0xffffffff] has been reserved
[    0.500317] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.500438] system 00:02: [io  0x0290-0x02af] has been reserved
[    0.500440] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.500467] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.500521] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.500524] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.500563] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.500701] pnp 00:06: [dma 0 disabled]
[    0.500746] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.500859] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.500956] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
[    0.500959] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.501063] pnp: PnP ACPI: found 9 devices
[    0.507577] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.507606] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.507609] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.507612] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.507615] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.507619] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.507622] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    0.507626] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.507630] pci 0000:00:05.0: PCI bridge to [bus 03]
[    0.507633] pci 0000:00:05.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.507638] pci 0000:00:07.0: PCI bridge to [bus 04]
[    0.507641] pci 0000:00:07.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.507646] pci 0000:00:14.4: PCI bridge to [bus 05]
[    0.507651] pci 0000:00:14.4:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.507659] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.507661] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.507663] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.507664] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.507666] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.507668] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.507669] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[    0.507671] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.507672] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.507674] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.507676] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.507677] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[    0.507679] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.507680] pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.507682] pci_bus 0000:05: resource 1 [mem 0xfe700000-0xfe7fffff]
[    0.507684] pci_bus 0000:05: resource 4 [io  0x0000-0x03af window]
[    0.507685] pci_bus 0000:05: resource 5 [io  0x03e0-0x0cf7 window]
[    0.507687] pci_bus 0000:05: resource 6 [io  0x03b0-0x03df window]
[    0.507688] pci_bus 0000:05: resource 7 [io  0x0d00-0xffff window]
[    0.507690] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.507691] pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.507693] pci_bus 0000:05: resource 10 [mem 0xc0000000-0xffffffff window]
[    0.507718] NET: Registered protocol family 2
[    0.507874] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.507955] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.508075] TCP: Hash tables configured (established 32768 bind 32768)
[    0.508111] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.508129] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.508179] NET: Registered protocol family 1
[    0.797991] pci 0000:01:00.0: Video device with shadowed ROM
[    0.798185] PCI: CLS 64 bytes, default 64
[    0.798224] Unpacking initramfs...
[    1.271113] Freeing initrd memory: 37676K
[    1.271390] PCI-DMA: Disabling AGP.
[    1.271461] PCI-DMA: aperture base @ b0000000 size 65536 KB
[    1.271462] PCI-DMA: using GART IOMMU.
[    1.271464] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.275214] perf: AMD NB counters detected
[    1.275252] LVT offset 0 assigned for vector 0x400
[    1.275267] perf: AMD IBS detected (0x000000ff)
[    1.275337] Scanning for low memory corruption every 60 seconds
[    1.275717] audit: initializing netlink subsys (disabled)
[    1.275730] audit: type=2000 audit(1520173498.964:1): initialized
[    1.276021] Initialise system trusted keyring
[    1.276142] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[    1.276143] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.277725] zbud: loaded
[    1.278049] VFS: Disk quotas dquot_6.6.0
[    1.278085] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.278356] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.278645] fuse init (API version 7.23)
[    1.278796] Key type big_key registered
[    1.278812] Allocating IMA MOK and blacklist keyrings.
[    1.279300] Key type asymmetric registered
[    1.279303] Asymmetric key parser 'x509' registered
[    1.279341] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.279377] io scheduler noop registered
[    1.279380] io scheduler deadline registered (default)
[    1.279410] io scheduler cfq registered
[    1.279707] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.279714] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.279743] vesafb: mode is 1600x1200x32, linelength=6400, pages=0
[    1.279744] vesafb: scrolling: redraw
[    1.279746] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.279756] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90000800000, using 7552k, total 7552k
[    1.279858] Console: switching to colour frame buffer device 200x75
[    1.279883] fb0: VESA VGA frame buffer device
[    1.279961] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.279964] ACPI: Power Button [PWRB]
[    1.280000] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.280002] ACPI: Power Button [PWRF]
[    1.280034] ACPI: acpi_idle registered with cpuidle
[    1.280540] GHES: HEST is not enabled!
[    1.280634] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.300997] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.302502] Linux agpgart interface v0.103
[    1.304468] loop: module loaded
[    1.304659] libphy: Fixed MDIO Bus: probed
[    1.304662] tun: Universal TUN/TAP device driver, 1.6
[    1.304663] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.304700] PPP generic driver version 2.4.2
[    1.304754] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.304758] ehci-pci: EHCI PCI platform driver
[    1.304833] QUIRK: Enable AMD PLL fix
[    1.304849] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.304854] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.304857] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.304865] ehci-pci 0000:00:12.2: debug port 1
[    1.304894] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
[    1.313870] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.313911] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.313913] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.313915] usb usb1: Product: EHCI Host Controller
[    1.313916] usb usb1: Manufacturer: Linux 4.4.0-116-generic ehci_hcd
[    1.313918] usb usb1: SerialNumber: 0000:00:12.2
[    1.314028] hub 1-0:1.0: USB hub found
[    1.314034] hub 1-0:1.0: 5 ports detected
[    1.314233] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.314238] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.314241] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.314268] ehci-pci 0000:00:13.2: debug port 1
[    1.314294] ehci-pci 0000:00:13.2: irq 21, io mem 0xfeb07000
[    1.325863] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.325901] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.325903] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.325905] usb usb2: Product: EHCI Host Controller
[    1.325906] usb usb2: Manufacturer: Linux 4.4.0-116-generic ehci_hcd
[    1.325908] usb usb2: SerialNumber: 0000:00:13.2
[    1.326014] hub 2-0:1.0: USB hub found
[    1.326019] hub 2-0:1.0: 5 ports detected
[    1.326201] ehci-pci 0000:00:16.2: EHCI Host Controller
[    1.326205] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[    1.326208] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.326216] ehci-pci 0000:00:16.2: debug port 1
[    1.326242] ehci-pci 0000:00:16.2: irq 23, io mem 0xfeb04000
[    1.337859] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.337896] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.337898] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.337899] usb usb3: Product: EHCI Host Controller
[    1.337901] usb usb3: Manufacturer: Linux 4.4.0-116-generic ehci_hcd
[    1.337902] usb usb3: SerialNumber: 0000:00:16.2
[    1.338001] hub 3-0:1.0: USB hub found
[    1.338006] hub 3-0:1.0: 4 ports detected
[    1.338107] ehci-platform: EHCI generic platform driver
[    1.338118] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.338121] ohci-pci: OHCI PCI platform driver
[    1.338187] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.338192] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[    1.338209] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
[    1.397869] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.397871] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.397873] usb usb4: Product: OHCI PCI host controller
[    1.397875] usb usb4: Manufacturer: Linux 4.4.0-116-generic ohci_hcd
[    1.397876] usb usb4: SerialNumber: 0000:00:12.0
[    1.398016] hub 4-0:1.0: USB hub found
[    1.398047] hub 4-0:1.0: 5 ports detected
[    1.398209] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.398214] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.398231] ohci-pci 0000:00:13.0: irq 20, io mem 0xfeb08000
[    1.457868] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.457871] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.457873] usb usb5: Product: OHCI PCI host controller
[    1.457874] usb usb5: Manufacturer: Linux 4.4.0-116-generic ohci_hcd
[    1.457875] usb usb5: SerialNumber: 0000:00:13.0
[    1.458013] hub 5-0:1.0: USB hub found
[    1.458020] hub 5-0:1.0: 5 ports detected
[    1.458178] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.458182] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[    1.458200] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
[    1.517874] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.517877] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.517879] usb usb6: Product: OHCI PCI host controller
[    1.517880] usb usb6: Manufacturer: Linux 4.4.0-116-generic ohci_hcd
[    1.517882] usb usb6: SerialNumber: 0000:00:14.5
[    1.518024] hub 6-0:1.0: USB hub found
[    1.518031] hub 6-0:1.0: 2 ports detected
[    1.518170] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    1.518174] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[    1.518193] ohci-pci 0000:00:16.0: irq 22, io mem 0xfeb05000
[    1.577886] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.577888] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.577890] usb usb7: Product: OHCI PCI host controller
[    1.577892] usb usb7: Manufacturer: Linux 4.4.0-116-generic ohci_hcd
[    1.577893] usb usb7: SerialNumber: 0000:00:16.0
[    1.578028] hub 7-0:1.0: USB hub found
[    1.578034] hub 7-0:1.0: 4 ports detected
[    1.578129] ohci-platform: OHCI generic platform driver
[    1.578139] uhci_hcd: USB Universal Host Controller Interface driver
[    1.578208] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.578212] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
[    1.625837] usb 1-4: new high-speed USB device number 2 using ehci-pci
[    1.638644] xhci_hcd 0000:03:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x10000410
[    1.638771] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[    1.638773] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.638774] usb usb8: Product: xHCI Host Controller
[    1.638776] usb usb8: Manufacturer: Linux 4.4.0-116-generic xhci-hcd
[    1.638777] usb usb8: SerialNumber: 0000:03:00.0
[    1.638902] hub 8-0:1.0: USB hub found
[    1.638908] hub 8-0:1.0: 2 ports detected
[    1.638981] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.638984] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
[    1.639020] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.639035] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[    1.639036] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.639038] usb usb9: Product: xHCI Host Controller
[    1.639039] usb usb9: Manufacturer: Linux 4.4.0-116-generic xhci-hcd
[    1.639041] usb usb9: SerialNumber: 0000:03:00.0
[    1.639135] hub 9-0:1.0: USB hub found
[    1.639141] hub 9-0:1.0: 2 ports detected
[    1.639240] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.639244] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10
[    1.699671] xhci_hcd 0000:04:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x10000410
[    1.699780] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[    1.699781] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.699783] usb usb10: Product: xHCI Host Controller
[    1.699784] usb usb10: Manufacturer: Linux 4.4.0-116-generic xhci-hcd
[    1.699786] usb usb10: SerialNumber: 0000:04:00.0
[    1.699907] hub 10-0:1.0: USB hub found
[    1.699913] hub 10-0:1.0: 2 ports detected
[    1.699981] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.699984] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 11
[    1.700019] usb usb11: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.700033] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
[    1.700034] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.700036] usb usb11: Product: xHCI Host Controller
[    1.700037] usb usb11: Manufacturer: Linux 4.4.0-116-generic xhci-hcd
[    1.700038] usb usb11: SerialNumber: 0000:04:00.0
[    1.700121] hub 11-0:1.0: USB hub found
[    1.700127] hub 11-0:1.0: 2 ports detected
[    1.700221] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.700554] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.700557] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.700671] mousedev: PS/2 mouse device common for all mice
[    1.700801] rtc_cmos 00:03: RTC can wake from S4
[    1.700894] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.700911] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.700918] i2c /dev entries driver
[    1.700960] device-mapper: uevent: version 1.0.3
[    1.701018] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.701036] ledtrig-cpu: registered to indicate activity on CPUs
[    1.701446] NET: Registered protocol family 10
[    1.701613] NET: Registered protocol family 17
[    1.701622] Key type dns_resolver registered
[    1.702063] microcode: CPU0: patch_level=0x06000822
[    1.702071] microcode: CPU1: patch_level=0x06000822
[    1.702081] microcode: CPU2: patch_level=0x06000822
[    1.702090] microcode: CPU3: patch_level=0x06000822
[    1.702098] microcode: CPU4: patch_level=0x06000822
[    1.702106] microcode: CPU5: patch_level=0x06000822
[    1.702142] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.702298] registered taskstats version 1
[    1.702310] Loading compiled-in X.509 certificates
[    1.703013] Loaded X.509 cert 'Build time autogenerated kernel key: aa84f01984fbd529c105810b59e379d349698248'
[    1.703029] zswap: loaded using pool lzo/zbud
[    1.704747] Key type trusted registered
[    1.708071] Key type encrypted registered
[    1.708077] AppArmor: AppArmor sha1 policy hashing enabled
[    1.708080] ima: No TPM chip found, activating TPM-bypass!
[    1.708100] evm: HMAC attrs: 0x1
[    1.708368]   Magic number: 10:140:434
[    1.708440] rtc_cmos 00:03: setting system clock to 2018-03-04 14:25:00 UTC (1520173500)
[    1.708574] acpi-cpufreq: overriding BIOS provided _PSD data
[    1.708762] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.708763] EDD information not available.
[    1.708837] PM: Hibernation image not present or could not be loaded.
[    1.710002] Freeing unused kernel memory: 1508K
[    1.710004] Write protecting the kernel read-only data: 14336k
[    1.710643] Freeing unused kernel memory: 1700K
[    1.710881] Freeing unused kernel memory: 104K
[    1.720543] random: systemd-udevd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    1.720604] random: systemd-udevd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    1.720615] random: systemd-udevd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    1.721130] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    1.721149] random: udevadm: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    1.727465] random: systemd-udevd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    1.727481] random: systemd-udevd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    1.727487] random: systemd-udevd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    1.727699] random: systemd-udevd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    1.727712] random: systemd-udevd: uninitialized urandom read (16 bytes read, 7 bits of entropy available)
[    1.756878] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.758568] wmi: Mapper loaded
[    1.762476] usb 1-4: New USB device found, idVendor=1a40, idProduct=0101
[    1.762480] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.762482] usb 1-4: Product: USB 2.0 Hub [MTT]
[    1.762749] hub 1-4:1.0: USB hub found
[    1.763433] hub 1-4:1.0: 4 ports detected
[    1.765733] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.765742] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.766554] r8169 0000:02:00.0 eth0: RTL8168f/8111f at 0xffffc9000000a000, 30:5a:3a:49:11:e9, XID 08000800 IRQ 43
[    1.766557] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.767536] ahci 0000:00:11.0: version 3.0
[    1.767706] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    1.767712] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part 
[    1.768298] scsi host0: ahci
[    1.768432] scsi host1: ahci
[    1.768561] scsi host2: ahci
[    1.768613] [drm] Initialized drm 1.1.0 20060810
[    1.768685] scsi host3: ahci
[    1.768737] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
[    1.768741] ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
[    1.768743] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
[    1.768746] ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19
[    1.787620] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.796101] [drm] radeon kernel modesetting enabled.
[    1.797827] usb 5-1: new low-speed USB device number 2 using ohci-pci
[    1.797961] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.797963] AMD IOMMUv2 functionality not available on this system
[    1.800499] CRAT table not found
[    1.800501] Finished initializing topology ret=0
[    1.800546] kfd kfd: Initialized module
[    1.800751] checking generic (c0000000 760000) vs hw (c0000000 10000000)
[    1.800754] fb: switching to radeondrmfb from VESA VGA
[    1.800778] Console: switching to colour dummy device 80x25
[    1.801062] [drm] initializing kernel modesetting (BARTS 0x1002:0x6739 0x174B:0xE174).
[    1.801072] [drm] register mmio base: 0xFEA20000
[    1.801073] [drm] register mmio size: 131072
[    1.801127] ATOM BIOS: BARTS
[    1.801299] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    1.801301] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    1.801303] [drm] Detected VRAM RAM=1024M, BAR=256M
[    1.801304] [drm] RAM width 256bits DDR
[    1.801343] [TTM] Zone  kernel: Available graphics memory: 1972354 kiB
[    1.801344] [TTM] Initializing pool allocator
[    1.801349] [TTM] Initializing DMA pool allocator
[    1.801362] [drm] radeon: 1024M of VRAM memory ready
[    1.801363] [drm] radeon: 1024M of GTT memory ready.
[    1.801370] [drm] Loading BARTS Microcode
[    1.801436] [drm] Internal thermal controller with fan control
[    1.806463] [drm] radeon: dpm initialized
[    1.806551] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.807487] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    1.824979] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
[    1.825080] radeon 0000:01:00.0: WB enabled
[    1.825082] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8800b9b22c00
[    1.825084] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8800b9b22c0c
[    1.826574] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001032118
[    1.826576] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.826577] [drm] Driver supports precise vblank timestamp query.
[    1.826578] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    1.826605] radeon 0000:01:00.0: radeon: using MSI.
[    1.826668] [drm] radeon: irq initialized.
[    1.842926] [drm] ring test on 0 succeeded in 2 usecs
[    1.842937] [drm] ring test on 3 succeeded in 7 usecs
[    1.965868] usb 5-1: New USB device found, idVendor=046d, idProduct=c31d
[    1.965870] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.965872] usb 5-1: Product: USB Keyboard
[    1.965874] usb 5-1: Manufacturer: Logitech
[    1.976955] hidraw: raw HID events driver (C) Jiri Kosina
[    1.990041] usbcore: registered new interface driver usbhid
[    1.990042] usbhid: USB HID core driver
[    1.991383] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/0003:046D:C31D.0001/input/input5
[    2.018686] [drm] ring test on 5 succeeded in 2 usecs
[    2.018695] [drm] UVD initialized successfully.
[    2.018837] [drm] ib test on ring 0 succeeded in 0 usecs
[    2.018890] [drm] ib test on ring 3 succeeded in 0 usecs
[    2.045937] hid-generic 0003:046D:C31D.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:13.0-1/input0
[    2.048959] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.1/0003:046D:C31D.0002/input/input6
[    2.101935] hid-generic 0003:046D:C31D.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:13.0-1/input1
[    2.125801] usb 4-5: new low-speed USB device number 2 using ohci-pci
[    2.257846] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.258774] ata2.00: ATA-8: WDC WD6400AAKS-75A7B2, 01.03B01, max UDMA/133
[    2.258777] ata2.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.259801] ata2.00: configured for UDMA/133
[    2.261847] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.261873] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.262664] ata4.00: ATA-9: ST2000DM001-1CH164, CC27, max UDMA/133
[    2.262666] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.263559] ata4.00: configured for UDMA/133
[    2.264283] ata3.00: ATAPI: ASUS     DRW-24F1MT, 1.00, max UDMA/100
[    2.265141] ata3.00: configured for UDMA/100
[    2.273838] tsc: Refined TSC clocksource calibration: 3913.217 MHz
[    2.273841] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x70d04213db5, max_idle_ns: 881590903803 ns
[    2.297940] usb 4-5: New USB device found, idVendor=1241, idProduct=1177
[    2.297943] usb 4-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.310105] input: HID 1241:1177 as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/0003:1241:1177.0003/input/input7
[    2.310234] hid-generic 0003:1241:1177.0003: input,hidraw2: USB HID v1.10 Mouse [HID 1241:1177] on usb-0000:00:12.0-5/input0
[    2.665902] [drm] ib test on ring 5 succeeded
[    2.667090] [drm] Radeon Display Connectors
[    2.667092] [drm] Connector 0:
[    2.667094] [drm]   DP-1
[    2.667094] [drm]   HPD4
[    2.667096] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    2.667097] [drm]   Encoders:
[    2.667098] [drm]     DFP1: INTERNAL_UNIPHY2
[    2.667099] [drm] Connector 1:
[    2.667100] [drm]   HDMI-A-1
[    2.667101] [drm]   HPD3
[    2.667102] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    2.667103] [drm]   Encoders:
[    2.667103] [drm]     DFP2: INTERNAL_UNIPHY2
[    2.667104] [drm] Connector 2:
[    2.667105] [drm]   DVI-I-1
[    2.667106] [drm]   HPD6
[    2.667107] [drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[    2.667108] [drm]   Encoders:
[    2.667109] [drm]     DFP3: INTERNAL_UNIPHY
[    2.667109] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    2.667110] [drm] Connector 3:
[    2.667111] [drm]   DVI-D-1
[    2.667112] [drm]   HPD1
[    2.667113] [drm]   DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c 0x648c
[    2.667114] [drm]   Encoders:
[    2.667114] [drm]     DFP4: INTERNAL_UNIPHY1
[    2.727345] [drm] fb mappable at 0xC0475000
[    2.727346] [drm] vram apper at 0xC0000000
[    2.727347] [drm] size 9216000
[    2.727348] [drm] fb depth is 24
[    2.727349] [drm]    pitch is 7680
[    2.727412] fbcon: radeondrmfb (fb0) is primary device
[    2.727480] Console: switching to colour frame buffer device 240x75
[    2.727510] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    2.737948] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[    3.273946] clocksource: Switched to clocksource tsc
[    7.581775] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    7.582061] ata1.00: ATA-7: INTEL SSDSA2M120G2GC, 2CV102HD, max UDMA/133
[    7.582064] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    7.582309] ata1.00: configured for UDMA/133
[    7.582445] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSA2M120 02HD PQ: 0 ANSI: 5
[    7.582628] ata1.00: Enabling discard_zeroes_data
[    7.582643] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    7.582671] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    7.582729] sd 0:0:0:0: [sda] Write Protect is off
[    7.582732] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.582760] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.582847] ata1.00: Enabling discard_zeroes_data
[    7.582878] scsi 1:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-7 3B01 PQ: 0 ANSI: 5
[    7.583029] sd 1:0:0:0: [sdb] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    7.583047] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    7.583074] sd 1:0:0:0: [sdb] Write Protect is off
[    7.583077] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    7.583098] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.583145]  sda: sda1 sda2
[    7.583338] ata1.00: Enabling discard_zeroes_data
[    7.583446] sd 0:0:0:0: [sda] Attached SCSI disk
[    7.585236] scsi 2:0:0:0: CD-ROM            ASUS     DRW-24F1MT       1.00 PQ: 0 ANSI: 5
[    7.593973]  sdb: sdb1
[    7.594220] sd 1:0:0:0: [sdb] Attached SCSI disk
[    7.605775] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    7.605777] cdrom: Uniform CD-ROM driver Revision: 3.20
[    7.605917] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    7.605976] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    7.606112] scsi 3:0:0:0: Direct-Access     ATA      ST2000DM001-1CH1 CC27 PQ: 0 ANSI: 5
[    7.606269] sd 3:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    7.606271] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[    7.606294] sd 3:0:0:0: Attached scsi generic sg3 type 0
[    7.606312] sd 3:0:0:0: [sdc] Write Protect is off
[    7.606315] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    7.606332] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.650636]  sdc: sdc1 < sdc5 sdc6 >
[    7.650962] sd 3:0:0:0: [sdc] Attached SCSI disk
[    8.524307] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    8.533865] random: nonblocking pool is initialized
[    8.627842] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    8.628007] systemd[1]: Detected architecture x86-64.
[    8.628210] systemd[1]: Set hostname to <gerard-desktop>.
[    8.723312] systemd[1]: Listening on Journal Socket.
[    8.723414] systemd[1]: Created slice System Slice.
[    8.737869] systemd[1]: Started Braille Device Support.
[    8.738449] systemd[1]: Mounting POSIX Message Queue File System...
[    8.738594] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.741038] systemd[1]: Reached target Encrypted Volumes.
[    8.741486] systemd[1]: Starting Nameserver information manager...
[    8.741549] systemd[1]: Listening on Syslog Socket.
[    8.741572] systemd[1]: Reached target Swap.
[    8.742044] systemd[1]: Mounting Debug File System...
[    8.742108] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.742623] systemd[1]: Mounting Huge Pages File System...
[    8.742679] systemd[1]: Listening on udev Kernel Socket.
[    8.742718] systemd[1]: Reached target User and Group Name Lookups.
[    8.743276] systemd[1]: Starting Uncomplicated firewall...
[    8.743359] systemd[1]: Listening on Journal Audit Socket.
[    8.743900] systemd[1]: Starting Journal Service...
[    8.745390] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.745872] systemd[1]: Starting Set console keymap...
[    8.745895] systemd[1]: Reached target Remote File Systems (Pre).
[    8.745925] systemd[1]: Reached target Remote File Systems.
[    8.745983] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.746020] systemd[1]: Listening on udev Control Socket.
[    8.751342] systemd[1]: Starting Load Kernel Modules...
[    8.751397] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    8.751812] systemd[1]: Started Read required files in advance.
[    8.751927] systemd[1]: Listening on fsck to fsckd communication Socket.
[    8.752467] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.752554] systemd[1]: Created slice User and Session Slice.
[    8.752578] systemd[1]: Reached target Slices.
[    8.755959] systemd[1]: Started Uncomplicated firewall.
[    8.760801] systemd[1]: Mounted POSIX Message Queue File System.
[    8.760846] systemd[1]: Mounted Huge Pages File System.
[    8.760881] systemd[1]: Mounted Debug File System.
[    8.762730] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    8.770786] systemd[1]: Started Nameserver information manager.
[    8.783058] lp: driver loaded but no devices found
[    8.786614] ppdev: user-space parallel port driver
[    8.788106] systemd[1]: Reached target Network (Pre).
[    8.788651] systemd[1]: Starting Create Static Device Nodes in /dev...
[    8.793369] systemd[1]: Started Load Kernel Modules.
[    8.793977] systemd[1]: Starting Apply Kernel Variables...
[    8.794558] systemd[1]: Mounting FUSE Control File System...
[    8.797332] systemd[1]: Mounted FUSE Control File System.
[    8.813943] systemd[1]: Started Apply Kernel Variables.
[    8.814310] systemd[1]: Started Journal Service.
[    8.897500] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    8.915645] systemd-journald[256]: Received request to flush runtime journal from PID 1
[    9.011115] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.028693] audit: type=1400 audit(1520173507.813:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=499 comm="apparmor_parser"
[    9.028701] audit: type=1400 audit(1520173507.813:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=499 comm="apparmor_parser"
[    9.029040] audit: type=1400 audit(1520173507.813:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=504 comm="apparmor_parser"
[    9.029909] audit: type=1400 audit(1520173507.817:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=503 comm="apparmor_parser"
[    9.029916] audit: type=1400 audit(1520173507.817:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=503 comm="apparmor_parser"
[    9.029922] audit: type=1400 audit(1520173507.817:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//snap_update_ns" pid=503 comm="apparmor_parser"
[    9.031377] audit: type=1400 audit(1520173507.817:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=506 comm="apparmor_parser"
[    9.032104] audit: type=1400 audit(1520173507.817:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=508 comm="apparmor_parser"
[    9.032598] audit: type=1400 audit(1520173507.817:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=500 comm="apparmor_parser"
[    9.032604] audit: type=1400 audit(1520173507.817:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=500 comm="apparmor_parser"
[    9.056579] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    9.057221] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    9.066714] EDAC MC: Ver: 3.0.0
[    9.069127] MCE: In-kernel MCE decoding enabled.
[    9.073027] AMD64 EDAC driver v3.4.0
[    9.073061] EDAC amd64: DRAM ECC disabled.
[    9.073067] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    9.126516] AVX version of gcm_enc/dec engaged.
[    9.126520] AES CTR mode by8 optimization enabled
[    9.130126] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    9.150958] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    9.150962] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    9.150964] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    9.150966] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    9.150968] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
[    9.150969] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    9.150972] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    9.150973] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    9.150975] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    9.152302] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
[    9.153636] ath5k 0000:05:05.0: registered as 'phy0'
[    9.170226] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    9.170300] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[    9.170873] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[    9.170959] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[    9.171032] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[    9.171107] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
[    9.171193] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[    9.171282] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
[    9.190497] kvm: Nested Virtualization enabled
[    9.190503] kvm: Nested Paging enabled
[    9.235674] asus_wmi: ASUS WMI generic driver loaded
[    9.237026] asus_wmi: Initialization: 0x0
[    9.237052] asus_wmi: BIOS WMI version: 0.9
[    9.237101] asus_wmi: SFUN value: 0x0
[    9.237477] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input17
[    9.237593] asus_wmi: Number of fans: 1
[    9.295639] cfg80211: World regulatory domain updated:
[    9.295642] cfg80211:  DFS Master region: unset
[    9.295643] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    9.295645] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    9.295647] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    9.295648] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    9.295650] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    9.295652] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    9.295653] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    9.295655] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    9.295656] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    9.821716] ath: EEPROM regdomain: 0x809c
[    9.821718] ath: EEPROM indicates we should expect a country code
[    9.821720] ath: doing EEPROM country->regdmn map search
[    9.821721] ath: country maps to regdmn code: 0x52
[    9.821722] ath: Country alpha2 being used: CN
[    9.821723] ath: Regpair used: 0x52
[    9.825047] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    9.825325] ath5k: phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
[    9.826829] ath5k 0000:05:05.0 wlp5s5: renamed from wlan0
[    9.841829] cfg80211: Regulatory domain changed to country: CN
[    9.841832] cfg80211:  DFS Master region: FCC
[    9.841834] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    9.841836] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    9.841839] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
[    9.841841] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[    9.841843] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[    9.841845] cfg80211:   (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[    9.841846] cfg80211:   (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
[    9.841848] cfg80211:   (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[   10.040695] IPv6: ADDRCONF(NETDEV_UP): wlp5s5: link is not ready
[   10.050661] IPv6: ADDRCONF(NETDEV_UP): wlp5s5: link is not ready
[   10.059215] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   10.172564] r8169 0000:02:00.0 enp2s0: link down
[   10.172627] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[   10.267494] IPv6: ADDRCONF(NETDEV_UP): wlp5s5: link is not ready
[   11.838543] wlp5s5: authenticate with 30:7c:b2:29:55:67
[   11.846446] wlp5s5: send auth to 30:7c:b2:29:55:67 (try 1/3)
[   11.848392] wlp5s5: authenticated
[   11.849698] wlp5s5: associate with 30:7c:b2:29:55:67 (try 1/3)
[   11.852762] wlp5s5: RX AssocResp from 30:7c:b2:29:55:67 (capab=0x431 status=0 aid=4)
[   11.852859] wlp5s5: associated
[   11.852867] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s5: link becomes ready
[   11.855757] cfg80211: Regulatory domain changed to country: FR
[   11.855760] cfg80211:  DFS Master region: ETSI
[   11.855761] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   11.855763] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   11.855765] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   11.855767] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   11.855769] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[   11.855770] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   34.315754] ath5k: ath5k_hw_get_isr: ISR: 0x00000400 IMR: 0x00000000
gerard@gerard-desktop:~/Bureau$ 

Je vais faire le "sudo lshw -C memory"

Hors ligne

#20 Le 04/03/2018, à 16:02

gerard33

Re : Souris qui se bloque

Voila le résultat de "sudo lshw -C memory"

gerard@gerard-desktop:~/Bureau$ sudo lshw -C memory
[sudo] Mot de passe de gerard : 
  *-firmware              
       description: BIOS
       fabriquant: American Megatrends Inc.
       identifiant matériel: 0
       version: 2603
       date: 06/26/2015
       taille: 64KiB
       capacité: 8128KiB
       fonctionnalités: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification uefi
  *-cache:0
       description: L1 cache
       identifiant matériel: 5
       emplacement: L1-Cache
       taille: 288KiB
       capacité: 288KiB
       horloge: 1GHz (1.0ns)
       fonctionnalités: pipeline-burst internal write-back unified
       configuration: level=1
  *-cache:1
       description: L2 cache
       identifiant matériel: 6
       emplacement: L2-Cache
       taille: 6MiB
       capacité: 6MiB
       horloge: 1GHz (1.0ns)
       fonctionnalités: pipeline-burst internal write-back unified
       configuration: level=2
  *-cache:2
       description: L3 cache
       identifiant matériel: 7
       emplacement: L3-Cache
       taille: 8MiB
       capacité: 8MiB
       horloge: 1GHz (1.0ns)
       fonctionnalités: pipeline-burst internal write-back unified
       configuration: level=3
  *-memory
       description: Mémoire Système
       identifiant matériel: 2c
       emplacement: Carte mère
       taille: 8GiB
     *-bank:0
          description: DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2017-11-09 20:09+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2017-12-10 10:57+0000X-Generator: Launchpad (build 18511) Synchrone [vide]
          produit: Array1_PartNumber0
          fabriquant: Manufacturer0
          identifiant matériel: 0
          numéro de série: SerNum0
          emplacement: DIMM0
     *-bank:1
          description: DIMM DDR3 Synchrone 1866 MHz (0,5 ns)
          produit: KHX1866C10D3/4G
          fabriquant: Kingston
          identifiant matériel: 1
          numéro de série: 6E0EE1F
          emplacement: DIMM1
          taille: 4GiB
          bits: 64 bits
          horloge: 1866MHz (0.5ns)
     *-bank:2
          description: DIMMProject-Id-Version: @(#) $Id$Report-Msgid-Bugs-To: POT-Creation-Date: 2009-10-08 14:02+0200PO-Revision-Date: 2017-11-09 20:09+0000Last-Translator: Lyonel Vincent <Unknown>Language-Team: MIME-Version: 1.0Content-Type: text/plain; charset=UTF-8Content-Transfer-Encoding: 8bitX-Launchpad-Export-Date: 2017-12-10 10:57+0000X-Generator: Launchpad (build 18511) Synchrone [vide]
          produit: Array1_PartNumber2
          fabriquant: Manufacturer2
          identifiant matériel: 2
          numéro de série: SerNum2
          emplacement: DIMM2
     *-bank:3
          description: DIMM DDR3 Synchrone 1866 MHz (0,5 ns)
          produit: KHX1866C10D3/4G
          fabriquant: Kingston
          identifiant matériel: 3
          numéro de série: 6D0E05F
          emplacement: DIMM3
          taille: 4GiB
          bits: 64 bits
          horloge: 1866MHz (0.5ns)
gerard@gerard-desktop:~/Bureau$

Hors ligne

#21 Le 04/03/2018, à 16:09

nam1962

Re : Souris qui se bloque

A mon sens, le mieux serait de faire une clef usb, de booter dessus et de passer un memtest --> https://doc.ubuntu-fr.org/diagnostic_gel_interface

Dernière modification par nam1962 (Le 04/03/2018, à 16:10)


[ Modéré ]

Hors ligne

#22 Le 04/03/2018, à 16:15

inbox

Re : Souris qui se bloque

Oui, c'est une autre chose à vérifier.

De toutes façons, il n'y a pas d'erreur lors du démarrage du système.


Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#23 Le 04/03/2018, à 16:29

gerard33

Re : Souris qui se bloque

Bon, j'avais échangé les souris, mais ça change rien, je viens de planter encore une fois !!

Je commence à désespérer !!
J'ai lancé un memtest !!

A priori, il ne teste qu'une barrette !!
Je vois Memory : 3996M !!!!!
Je vois aussi : "SMP: Disabled"  ça veut dire quoi ?

Je vais pouvoir récupérer le résultat ou ?

Dernière modification par gerard33 (Le 04/03/2018, à 16:47)

Hors ligne

#24 Le 04/03/2018, à 17:20

inbox

Re : Souris qui se bloque

Il est possible qu'une des deux barrettes ne soit pas dans le bon emplacement.
Il est aussi possible qu'une des deux barrettes soit HS.

Il faut démarrer avec l'une d'elles et faire un Memtest. Ensuite faire une autre test avec l'autre barrette. Résultat ?

Il faudrait connaître le modèle de la carte mère :

sudo lshw -C bus | head -6

SMP

S'il y a des erreurs avec ta RAM, tu verras des lignes rouges s'afficher dans la moitié inférieure de l'écran.

Dernière modification par inbox (Le 04/03/2018, à 17:24)


Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#25 Le 04/03/2018, à 17:20

nam1962

Re : Souris qui se bloque

Le mieux serait de tester en enlevant chaque barrette.
L'une d'entre elles semblant morte tu n'auras pas de RAM (tu ne la remets pas évidemment)


[ Modéré ]

Hors ligne