Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 26/03/2018, à 19:28

trackip

communication ordinateur/GPS Garmin inReach explorer+

Bonjour,

j'ai récemment acheté un GPS Garmin "inReach explorer+"

=> mon problème est le suivant: je n'arrive pas à interragir avec le GPS avec mon ordinateur
(importer des traces dans le GPS, récupérer des fichiers de suivi etc)

j'ai lu la doc Ubuntu sur les GPS et parcouru le forum et essayé pas mal de choses:


GPSbabel est installé et ne reconnait pas mon appareil

viking est installé mais je n'arrive pas à m'en servir ("OpenStreetMap (Mapquest): Failed to download tile")

j'ai essayé de créer un fichier dans "etc/udev/rules.d/51-garmin.rules" avec ce contenu:

SUBSYSTEM=="usb", ATTR{idVendor}=="1163", ATTR{idProduct}=="0300", MODE="0666"

ceci après avoir cherché les infos avec les commandes "lsusb" et "dmesg | tail -30" dans un teminal...

bref rien n'y fait....



Autre piste que j'ai tenté: interagir via le site garmin inreach:

Pour pouvoir se synchroniser: nécessité d'installer Inreach Sync, seulement disponible pour mac et windows.

j'ai tenté avec wine et le .exe de ce logiciel rien ne se passe....



merci de m'avoir lu et pour votre aide.


ma version d'Ubuntu

Ubuntu 16.04.4 LTS

Hors ligne

#2 Le 26/03/2018, à 19:47

lann

Re : communication ordinateur/GPS Garmin inReach explorer+

trackip a écrit :

viking est installé mais je n'arrive pas à m'en servir ("OpenStreetMap (Mapquest): Failed to download tile")

Oui, il faut choisir une autre carte. Mapquest ne fourni plus de cartes libres

Pour ce qui est de ton GPS, peux tu le connecter en USB et le démarrer puis donner le résultat de

dmesg

et

lsusb

Hors ligne

#3 Le 26/03/2018, à 20:00

trackip

Re : communication ordinateur/GPS Garmin inReach explorer+

ok alors

pour dmesg:

[    0.000000] microcode: microcode updated early to revision 0xa0b, date = 2010-09-28
[    0.000000] random: get_random_bytes called from start_kernel+0x42/0x50d with crng_init=0
[    0.000000] Linux version 4.13.0-37-generic (buildd@lcy01-amd64-012) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #42~16.04.1-Ubuntu SMP Wed Mar 7 16:03:28 UTC 2018 (Ubuntu 4.13.0-37.42~16.04.1-generic 4.13.13)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.13.0-37-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007d6a0fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007d6a1000-0x000000007d6a6fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007d6a7000-0x000000007d7b9fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007d7ba000-0x000000007d80efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007d80f000-0x000000007d907fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007d908000-0x000000007db0efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007db0f000-0x000000007db17fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007db18000-0x000000007db1efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007db1f000-0x000000007db63fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007db64000-0x000000007db9efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007db9f000-0x000000007dbe3fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007dbe4000-0x000000007dbfefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007dbff000-0x000000007dbfffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007dc00000-0x000000007ddfffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007e000000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.5 present.
[    0.000000] DMI: CLEVO CO.                        W830T/W840T                     /W830T/W840T                     , BIOS 6.00 11/13/2009
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7dc00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 07E000000 mask FFE000000 uncachable
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 0FFE00000 mask FFFE00000 write-protect
[    0.000000]   3 base 07DE00000 mask FFFE00000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000f7890-0x000f789f] mapped at [ffff9a80400f7890]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff9a8040097000] 97000 size 24576
[    0.000000] BRK [0x22d2a000, 0x22d2afff] PGTABLE
[    0.000000] BRK [0x22d2b000, 0x22d2bfff] PGTABLE
[    0.000000] BRK [0x22d2c000, 0x22d2cfff] PGTABLE
[    0.000000] BRK [0x22d2d000, 0x22d2dfff] PGTABLE
[    0.000000] BRK [0x22d2e000, 0x22d2efff] PGTABLE
[    0.000000] BRK [0x22d2f000, 0x22d2ffff] PGTABLE
[    0.000000] BRK [0x22d30000, 0x22d30fff] PGTABLE
[    0.000000] BRK [0x22d31000, 0x22d31fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x31f56000-0x34fa2fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F7800 000024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 0x000000007DBF888E 000064 (v01 PTLTD  ? XSDT   06040000  LTP 00000000)
[    0.000000] ACPI: FACP 0x000000007DBE8000 0000F4 (v03 INTEL  CRESTLNE 06040000 ALAN 00000001)
[    0.000000] ACPI: DSDT 0x000000007DBE9000 00647A (v02 Intel  CANTIGA  06040000 INTL 20050624)
[    0.000000] ACPI: FACS 0x000000007DB9EFC0 000040
[    0.000000] ACPI: FACS 0x000000007DB9EFC0 000040
[    0.000000] ACPI: HPET 0x000000007DBFEEFC 000038 (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: MCFG 0x000000007DBFEF34 00003C (v01 INTEL  CRESTLNE 06040000 LOHR 0000005A)
[    0.000000] ACPI: APIC 0x000000007DBFEF70 000068 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: BOOT 0x000000007DBFEFD8 000028 (v01 PTLTD  $SBFTBL$ 06040000  LTP 00000001)
[    0.000000] ACPI: SSDT 0x000000007DBE7000 000655 (v01 PmRef  CpuPm    00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 0x000000007DBE6000 000259 (v01 PmRef  Cpu0Tst  00003000 INTL 20050624)
[    0.000000] ACPI: SSDT 0x000000007DBE5000 00020F (v01 PmRef  ApTst    00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007dbfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7dbb9000-0x7dbe3fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007dbfffff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007d6a0fff]
[    0.000000]   node   0: [mem 0x000000007d6a7000-0x000000007d7b9fff]
[    0.000000]   node   0: [mem 0x000000007d80f000-0x000000007d907fff]
[    0.000000]   node   0: [mem 0x000000007db0f000-0x000000007db17fff]
[    0.000000]   node   0: [mem 0x000000007db1f000-0x000000007db63fff]
[    0.000000]   node   0: [mem 0x000000007db9f000-0x000000007dbe3fff]
[    0.000000]   node   0: [mem 0x000000007dbff000-0x000000007dbfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007dbfffff]
[    0.000000] On node 0 totalpages: 514269
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7984 pages used for memmap
[    0.000000]   DMA32 zone: 510273 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000007e000000-0x000000007fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000d1fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000d2000-0x000d3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000d4000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7d6a1000-0x7d6a6fff]
[    0.000000] PM: Registered nosave memory: [mem 0x7d7ba000-0x7d80efff]
[    0.000000] PM: Registered nosave memory: [mem 0x7d908000-0x7db0efff]
[    0.000000] PM: Registered nosave memory: [mem 0x7db18000-0x7db1efff]
[    0.000000] PM: Registered nosave memory: [mem 0x7db64000-0x7db9efff]
[    0.000000] PM: Registered nosave memory: [mem 0x7dbe4000-0x7dbfefff]
[    0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @ffff9a80bd400000 s146520 r8192 d29608 u1048576
[    0.000000] pcpu-alloc: s146520 r8192 d29608 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 506200
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.13.0-37-generic root=/dev/mapper/ubuntu--vg-root ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1948312K/2057076K available (12300K kernel code, 2481K rwdata, 4008K rodata, 2364K init, 2368K bss, 108764K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 37832 entries in 148 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1196.977 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2393.95 BogoMIPS (lpj=4787908)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170531
[    0.013544] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.013599] Security Framework initialized
[    0.013602] Yama: becoming mindful.
[    0.013639] AppArmor: AppArmor initialized
[    0.014941] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.015658] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.015715] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.015740] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.016244] FEATURE SPEC_CTRL Not Present
[    0.016248] CPU: Physical Processor ID: 0
[    0.016249] CPU: Processor Core ID: 0
[    0.016252] mce: CPU supports 6 MCE banks
[    0.016264] CPU0: Thermal monitoring enabled (TM2)
[    0.016269] process: using mwait in idle threads
[    0.016277] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.016279] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.016282] Spectre V2 mitigation: Mitigation: Full generic retpoline
[    0.016283] Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
[    0.016543] Freeing SMP alternatives memory: 36K
[    0.020188] smpboot: Max logical packages: 1
[    0.020674] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.068000] smpboot: CPU0: Genuine Intel(R) CPU           U2300  @ 1.20GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.068000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[    0.068000] ... version:                2
[    0.068000] ... bit width:              40
[    0.068000] ... generic registers:      2
[    0.068000] ... value mask:             000000ffffffffff
[    0.068000] ... max period:             000000007fffffff
[    0.068000] ... fixed-purpose events:   3
[    0.068000] ... event mask:             0000000700000003
[    0.068000] Hierarchical SRCU implementation.
[    0.068000] smp: Bringing up secondary CPUs ...
[    0.068000] x86: Booting SMP configuration:
[    0.068000] .... node  #0, CPUs:      #1
[    0.070124] smp: Brought up 1 node, 2 CPUs
[    0.070124] smpboot: Total of 2 processors activated (4787.90 BogoMIPS)
[    0.072143] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.072433] devtmpfs: initialized
[    0.072433] x86/mm: Memory block size: 128MB
[    0.072789] evm: security.selinux
[    0.072791] evm: security.SMACK64
[    0.072792] evm: security.SMACK64EXEC
[    0.072794] evm: security.SMACK64TRANSMUTE
[    0.072796] evm: security.SMACK64MMAP
[    0.072797] evm: security.ima
[    0.072798] evm: security.capability
[    0.072926] PM: Registering ACPI NVS region [mem 0x7db64000-0x7db9efff] (241664 bytes)
[    0.073047] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.073058] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.073181] pinctrl core: initialized pinctrl subsystem
[    0.073387] RTC time: 13:59:36, date: 03/26/18
[    0.073562] NET: Registered protocol family 16
[    0.073562] cpuidle: using governor ladder
[    0.073562] cpuidle: using governor menu
[    0.073562] PCCT header not found.
[    0.073562] Simple Boot Flag at 0x36 set to 0x1
[    0.073562] ACPI: bus type PCI registered
[    0.073562] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.073562] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.073562] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.073562] PCI: Using configuration type 1 for base access
[    0.076157] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.076159] mtrr: probably your BIOS does not setup all CPUs.
[    0.076160] mtrr: corrected configuration.
[    0.078915] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.078915] ACPI: Added _OSI(Module Device)
[    0.078915] ACPI: Added _OSI(Processor Device)
[    0.078915] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.078915] ACPI: Added _OSI(Processor Aggregator Device)
[    0.085483] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.086661] ACPI: Dynamic OEM Table Load:
[    0.086674] ACPI: SSDT 0xFFFF9A80BA668A00 00019F (v01 PmRef  Cpu0Ist  00003000 INTL 20050624)
[    0.087108] ACPI: Dynamic OEM Table Load:
[    0.087120] ACPI: SSDT 0xFFFF9A80BA5A8000 0005D7 (v01 PmRef  Cpu0Cst  00003001 INTL 20050624)
[    0.087537] ACPI: Dynamic OEM Table Load:
[    0.087537] ACPI: SSDT 0xFFFF9A80BA60F800 0001CF (v01 PmRef  ApIst    00003000 INTL 20050624)
[    0.087537] ACPI: Dynamic OEM Table Load:
[    0.087537] ACPI: SSDT 0xFFFF9A80BA5F09C0 00008D (v01 PmRef  ApCst    00003000 INTL 20050624)
[    0.087537] ACPI: EC: EC started
[    0.087537] ACPI: EC: interrupt blocked
[    0.304086] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.304091] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.304095] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.304096] ACPI: Interpreter enabled
[    0.304142] ACPI: (supports S0 S3 S4 S5)
[    0.304145] ACPI: Using IOAPIC for interrupt routing
[    0.304211] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.304603] ACPI: Enabled 14 GPEs in block 00 to 3F
[    0.317147] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.317159] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.317169] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.318088] PCI host bridge to bus 0000:00
[    0.318094] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.318098] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.318102] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.318105] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.318109] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.318113] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.318116] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.318120] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.318123] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[    0.318128] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.318146] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[    0.318190] DMAR: Forcing write-buffer flush capability
[    0.318191] DMAR: Disabling IOMMU for graphics on this chipset
[    0.318361] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[    0.318384] pci 0000:00:02.0: reg 0x10: [mem 0xf8000000-0xf83fffff 64bit]
[    0.318398] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.318407] pci 0000:00:02.0: reg 0x20: [io  0x1800-0x1807]
[    0.318602] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[    0.318623] pci 0000:00:02.1: reg 0x10: [mem 0xf8400000-0xf84fffff 64bit]
[    0.318865] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.318939] pci 0000:00:1a.0: reg 0x20: [io  0x1820-0x183f]
[    0.319161] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.319235] pci 0000:00:1a.1: reg 0x20: [io  0x1840-0x185f]
[    0.319449] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[    0.319522] pci 0000:00:1a.2: reg 0x20: [io  0x1860-0x187f]
[    0.319749] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.319784] pci 0000:00:1a.7: reg 0x10: [mem 0xf8904800-0xf8904bff]
[    0.319913] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.320099] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.320137] pci 0000:00:1b.0: reg 0x10: [mem 0xf8700000-0xf8703fff 64bit]
[    0.320269] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.320452] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.320592] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.320779] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[    0.320919] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.321107] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[    0.321247] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.321436] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.321527] pci 0000:00:1d.0: reg 0x20: [io  0x1880-0x189f]
[    0.321759] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.321845] pci 0000:00:1d.1: reg 0x20: [io  0x18a0-0x18bf]
[    0.322075] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.322147] pci 0000:00:1d.2: reg 0x20: [io  0x18c0-0x18df]
[    0.322366] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.322401] pci 0000:00:1d.7: reg 0x10: [mem 0xf8904c00-0xf8904fff]
[    0.322533] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.322704] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.322958] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[    0.323273] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[    0.323308] pci 0000:00:1f.2: reg 0x10: [io  0x1818-0x181f]
[    0.323323] pci 0000:00:1f.2: reg 0x14: [io  0x180c-0x180f]
[    0.323337] pci 0000:00:1f.2: reg 0x18: [io  0x1810-0x1817]
[    0.323352] pci 0000:00:1f.2: reg 0x1c: [io  0x1808-0x180b]
[    0.323366] pci 0000:00:1f.2: reg 0x20: [io  0x18e0-0x18ff]
[    0.323382] pci 0000:00:1f.2: reg 0x24: [mem 0xf8904000-0xf89047ff]
[    0.323460] pci 0000:00:1f.2: PME# supported from D3hot
[    0.323624] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.323658] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
[    0.323696] pci 0000:00:1f.3: reg 0x20: [io  0x1c00-0x1c1f]
[    0.324572] pci 0000:02:00.0: [10ec:8172] type 00 class 0x028000
[    0.325509] pci 0000:02:00.0: reg 0x10: [io  0x2000-0x20ff]
[    0.325898] pci 0000:02:00.0: reg 0x14: [mem 0xf8500000-0xf8503fff]
[    0.329795] pci 0000:02:00.0: supports D1 D2
[    0.329799] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[    0.331286] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.331294] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.331301] pci 0000:00:1c.0:   bridge window [mem 0xf8500000-0xf85fffff]
[    0.331446] acpiphp: Slot [1] registered
[    0.331464] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[    0.331471] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.331477] pci 0000:00:1c.1:   bridge window [mem 0xf4000000-0xf7ffffff]
[    0.331487] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
[    0.331624] pci 0000:06:00.0: [197b:2382] type 00 class 0x088000
[    0.331667] pci 0000:06:00.0: reg 0x10: [mem 0xf8604000-0xf86040ff]
[    0.332025] pci 0000:06:00.2: [197b:2381] type 00 class 0x080501
[    0.332067] pci 0000:06:00.2: reg 0x10: [mem 0xf8604400-0xf86044ff]
[    0.332374] pci 0000:06:00.3: [197b:2383] type 00 class 0x088000
[    0.332417] pci 0000:06:00.3: reg 0x10: [mem 0xf8604800-0xf86048ff]
[    0.332725] pci 0000:06:00.5: [197b:0250] type 00 class 0x020000
[    0.332768] pci 0000:06:00.5: reg 0x10: [mem 0xf8600000-0xf8603fff]
[    0.332804] pci 0000:06:00.5: reg 0x18: [io  0x4400-0x447f]
[    0.332823] pci 0000:06:00.5: reg 0x1c: [io  0x4000-0x40ff]
[    0.332983] pci 0000:06:00.5: PME# supported from D0 D3hot D3cold
[    0.348043] pci 0000:00:1c.4: PCI bridge to [bus 06]
[    0.348050] pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
[    0.348057] pci 0000:00:1c.4:   bridge window [mem 0xf8600000-0xf86fffff]
[    0.348192] pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
[    0.348208] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.348212] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.348216] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.348220] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.348224] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.348227] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.348231] pci 0000:00:1e.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.348235] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xdfffffff window] (subtractive decode)
[    0.348239] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
[    0.348915] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[    0.349029] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.349141] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.349252] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[    0.349363] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.349476] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.349595] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.349707] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[    0.352010] ACPI: EC: interrupt unblocked
[    0.352010] ACPI: EC: event unblocked
[    0.352010] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.352010] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.352010] SCSI subsystem initialized
[    0.352055] libata version 3.00 loaded.
[    0.352067] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.352067] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.352067] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.352067] vgaarb: loaded
[    0.352089] ACPI: bus type USB registered
[    0.352124] usbcore: registered new interface driver usbfs
[    0.352141] usbcore: registered new interface driver hub
[    0.352167] usbcore: registered new device driver usb
[    0.352257] EDAC MC: Ver: 3.0.0
[    0.352505] PCI: Using ACPI for IRQ routing
[    0.370019] PCI: pci_cache_line_size set to 64 bytes
[    0.370225] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.370228] e820: reserve RAM buffer [mem 0x7d6a1000-0x7fffffff]
[    0.370232] e820: reserve RAM buffer [mem 0x7d7ba000-0x7fffffff]
[    0.370235] e820: reserve RAM buffer [mem 0x7d908000-0x7fffffff]
[    0.370239] e820: reserve RAM buffer [mem 0x7db18000-0x7fffffff]
[    0.370242] e820: reserve RAM buffer [mem 0x7db64000-0x7fffffff]
[    0.370245] e820: reserve RAM buffer [mem 0x7dbe4000-0x7fffffff]
[    0.370248] e820: reserve RAM buffer [mem 0x7dc00000-0x7fffffff]
[    0.370451] NetLabel: Initializing
[    0.370453] NetLabel:  domain hash size = 128
[    0.370454] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.370490] NetLabel:  unlabeled traffic allowed by default
[    0.370535] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.370535] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.370535] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.372040] clocksource: Switched to clocksource hpet
[    0.402205] VFS: Disk quotas dquot_6.6.0
[    0.402245] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.402488] AppArmor: AppArmor Filesystem Enabled
[    0.402601] pnp: PnP ACPI init
[    0.402952] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.402961] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.403022] pnp 00:01: disabling [io  0x3322-0x3323] because it overlaps 0000:00:1c.1 BAR 13 [io  0x3000-0x3fff]
[    0.403112] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.403116] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.403120] system 00:01: [io  0x0480-0x048f] has been reserved
[    0.403124] system 00:01: [io  0xffff] has been reserved
[    0.403129] system 00:01: [io  0xffff] has been reserved
[    0.403133] system 00:01: [io  0x1000-0x107f] has been reserved
[    0.403137] system 00:01: [io  0x1180-0x11ff] has been reserved
[    0.403141] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.403145] system 00:01: [io  0xfe00] has been reserved
[    0.403152] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.403221] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.403281] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.403337] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.403683] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.403687] system 00:05: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.403691] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.403696] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.403700] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.403704] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.403708] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.403715] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.404319] pnp: PnP ACPI: found 6 devices
[    0.413071] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.413104] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-03] add_size 200000 add_align 100000
[    0.413132] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06] add_size 200000 add_align 100000
[    0.413169] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[    0.413181] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.413192] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80400000-0x804000ff 64bit]
[    0.413211] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[    0.413216] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.413225] pci 0000:00:1c.0:   bridge window [mem 0xf8500000-0xf85fffff]
[    0.413231] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
[    0.413241] pci 0000:00:1c.1: PCI bridge to [bus 04-05]
[    0.413246] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.413254] pci 0000:00:1c.1:   bridge window [mem 0xf4000000-0xf7ffffff]
[    0.413261] pci 0000:00:1c.1:   bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
[    0.413272] pci 0000:00:1c.4: PCI bridge to [bus 06]
[    0.413277] pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
[    0.413285] pci 0000:00:1c.4:   bridge window [mem 0xf8600000-0xf86fffff]
[    0.413291] pci 0000:00:1c.4:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.413302] pci 0000:00:1e.0: PCI bridge to [bus 07]
[    0.413321] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.413325] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.413328] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.413331] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff window]
[    0.413335] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff window]
[    0.413338] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff window]
[    0.413342] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000e3fff window]
[    0.413345] pci_bus 0000:00: resource 11 [mem 0x80000000-0xdfffffff window]
[    0.413349] pci_bus 0000:00: resource 12 [mem 0xf0000000-0xfebfffff window]
[    0.413353] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.413356] pci_bus 0000:02: resource 1 [mem 0xf8500000-0xf85fffff]
[    0.413360] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[    0.413363] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.413366] pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf7ffffff]
[    0.413370] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref]
[    0.413373] pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
[    0.413377] pci_bus 0000:06: resource 1 [mem 0xf8600000-0xf86fffff]
[    0.413380] pci_bus 0000:06: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.413384] pci_bus 0000:07: resource 4 [io  0x0000-0x0cf7 window]
[    0.413387] pci_bus 0000:07: resource 5 [io  0x0d00-0xffff window]
[    0.413391] pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.413394] pci_bus 0000:07: resource 7 [mem 0x000d4000-0x000d7fff window]
[    0.413397] pci_bus 0000:07: resource 8 [mem 0x000d8000-0x000dbfff window]
[    0.413401] pci_bus 0000:07: resource 9 [mem 0x000dc000-0x000dffff window]
[    0.413404] pci_bus 0000:07: resource 10 [mem 0x000e0000-0x000e3fff window]
[    0.413408] pci_bus 0000:07: resource 11 [mem 0x80000000-0xdfffffff window]
[    0.413411] pci_bus 0000:07: resource 12 [mem 0xf0000000-0xfebfffff window]
[    0.413573] NET: Registered protocol family 2
[    0.413902] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.413981] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.414084] TCP: Hash tables configured (established 16384 bind 16384)
[    0.414166] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.414189] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.414282] NET: Registered protocol family 1
[    0.414315] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.416790] PCI: CLS 64 bytes, default 64
[    0.416887] Unpacking initramfs...
[    2.192126] Freeing initrd memory: 49460K
[    2.192487] Scanning for low memory corruption every 60 seconds
[    2.193063] audit: initializing netlink subsys (disabled)
[    2.193184] audit: type=2000 audit(1522072777.193:1): state=initialized audit_enabled=0 res=1
[    2.193825] Initialise system trusted keyrings
[    2.193842] Key type blacklist registered
[    2.193913] workingset: timestamp_bits=36 max_order=19 bucket_order=0
[    2.197325] zbud: loaded
[    2.198448] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.198816] fuse init (API version 7.26)
[    2.201579] Key type asymmetric registered
[    2.201582] Asymmetric key parser 'x509' registered
[    2.201677] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    2.201733] io scheduler noop registered
[    2.201735] io scheduler deadline registered
[    2.201804] io scheduler cfq registered (default)
[    2.203237] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    2.203239] vesafb: scrolling: redraw
[    2.203243] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.203266] vesafb: framebuffer at 0xd0000000, mapped to 0xffffa5bcc0800000, using 3072k, total 3072k
[    2.203457] Console: switching to colour frame buffer device 128x48
[    2.203505] fb0: VESA VGA frame buffer device
[    2.203541] intel_idle: does not run on family 6 model 23
[    2.420427] ACPI: AC Adapter [AC] (on-line)
[    2.420564] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    2.420612] ACPI: Power Button [PWRB]
[    2.420706] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    2.420742] ACPI: Sleep Button [SLPB]
[    2.448448] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    2.476408] ACPI: Lid Switch [LID0]
[    2.476501] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.476535] ACPI: Power Button [PWRF]
[    2.477085] Monitor-Mwait will be used to enter C-1 state
[    2.477093] Monitor-Mwait will be used to enter C-2 state
[    2.477099] Monitor-Mwait will be used to enter C-3 state
[    2.477103] tsc: Marking TSC unstable due to TSC halts in idle
[    2.485573] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    2.487858] thermal LNXTHERM:00: registered as thermal_zone0
[    2.487861] ACPI: Thermal Zone [TZ0] (25 C)
[    2.487927] GHES: HEST is not enabled!
[    2.488237] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.488280] ACPI: Battery Slot [BAT0] (battery absent)
[    2.491967] Linux agpgart interface v0.103
[    2.495505] loop: module loaded
[    2.495944] libphy: Fixed MDIO Bus: probed
[    2.495947] tun: Universal TUN/TAP device driver, 1.6
[    2.496102] PPP generic driver version 2.4.2
[    2.496231] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.496237] ehci-pci: EHCI PCI platform driver
[    2.496527] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    2.496539] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    2.496560] ehci-pci 0000:00:1a.7: debug port 1
[    2.500477] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    2.500500] ehci-pci 0000:00:1a.7: irq 19, io mem 0xf8904800
[    2.516104] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    2.516195] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.516199] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.516203] usb usb1: Product: EHCI Host Controller
[    2.516206] usb usb1: Manufacturer: Linux 4.13.0-37-generic ehci_hcd
[    2.516209] usb usb1: SerialNumber: 0000:00:1a.7
[    2.516472] hub 1-0:1.0: USB hub found
[    2.516486] hub 1-0:1.0: 6 ports detected
[    2.516987] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.517002] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    2.517021] ehci-pci 0000:00:1d.7: debug port 1
[    2.520955] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    2.520976] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf8904c00
[    2.536103] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.536197] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.536201] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.536204] usb usb2: Product: EHCI Host Controller
[    2.536208] usb usb2: Manufacturer: Linux 4.13.0-37-generic ehci_hcd
[    2.536211] usb usb2: SerialNumber: 0000:00:1d.7
[    2.536465] hub 2-0:1.0: USB hub found
[    2.536485] hub 2-0:1.0: 6 ports detected
[    2.536785] ehci-platform: EHCI generic platform driver
[    2.536818] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.536833] ohci-pci: OHCI PCI platform driver
[    2.536859] ohci-platform: OHCI generic platform driver
[    2.536875] uhci_hcd: USB Universal Host Controller Interface driver
[    2.537066] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    2.537082] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    2.537093] uhci_hcd 0000:00:1a.0: detected 2 ports
[    2.537143] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[    2.537235] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.537239] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.537242] usb usb3: Product: UHCI Host Controller
[    2.537246] usb usb3: Manufacturer: Linux 4.13.0-37-generic uhci_hcd
[    2.537249] usb usb3: SerialNumber: 0000:00:1a.0
[    2.537504] hub 3-0:1.0: USB hub found
[    2.537517] hub 3-0:1.0: 2 ports detected
[    2.537867] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    2.537879] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    2.537889] uhci_hcd 0000:00:1a.1: detected 2 ports
[    2.537936] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[    2.538025] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.538029] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.538032] usb usb4: Product: UHCI Host Controller
[    2.538036] usb usb4: Manufacturer: Linux 4.13.0-37-generic uhci_hcd
[    2.538039] usb usb4: SerialNumber: 0000:00:1a.1
[    2.538276] hub 4-0:1.0: USB hub found
[    2.538288] hub 4-0:1.0: 2 ports detected
[    2.538613] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    2.538624] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    2.538639] uhci_hcd 0000:00:1a.2: detected 2 ports
[    2.538676] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[    2.538766] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.538771] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.538774] usb usb5: Product: UHCI Host Controller
[    2.538777] usb usb5: Manufacturer: Linux 4.13.0-37-generic uhci_hcd
[    2.538781] usb usb5: SerialNumber: 0000:00:1a.2
[    2.539015] hub 5-0:1.0: USB hub found
[    2.539028] hub 5-0:1.0: 2 ports detected
[    2.539350] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.539361] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    2.539371] uhci_hcd 0000:00:1d.0: detected 2 ports
[    2.539402] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[    2.539488] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.539493] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.539496] usb usb6: Product: UHCI Host Controller
[    2.539499] usb usb6: Manufacturer: Linux 4.13.0-37-generic uhci_hcd
[    2.539502] usb usb6: SerialNumber: 0000:00:1d.0
[    2.539736] hub 6-0:1.0: USB hub found
[    2.539748] hub 6-0:1.0: 2 ports detected
[    2.540100] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.540113] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    2.540124] uhci_hcd 0000:00:1d.1: detected 2 ports
[    2.540151] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[    2.540245] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    2.540249] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.540253] usb usb7: Product: UHCI Host Controller
[    2.540256] usb usb7: Manufacturer: Linux 4.13.0-37-generic uhci_hcd
[    2.540259] usb usb7: SerialNumber: 0000:00:1d.1
[    2.540505] hub 7-0:1.0: USB hub found
[    2.540517] hub 7-0:1.0: 2 ports detected
[    2.540873] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.540884] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    2.540894] uhci_hcd 0000:00:1d.2: detected 2 ports
[    2.540942] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[    2.541028] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[    2.541032] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.541035] usb usb8: Product: UHCI Host Controller
[    2.541039] usb usb8: Manufacturer: Linux 4.13.0-37-generic uhci_hcd
[    2.541042] usb usb8: SerialNumber: 0000:00:1d.2
[    2.541276] hub 8-0:1.0: USB hub found
[    2.541288] hub 8-0:1.0: 2 ports detected
[    2.541576] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.546418] i8042: Detected active multiplexing controller, rev 1.1
[    2.549653] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.549666] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.549807] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.549811] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.549815] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.550121] mousedev: PS/2 mouse device common for all mice
[    2.550767] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    2.550807] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    2.550820] i2c /dev entries driver
[    2.550932] device-mapper: uevent: version 1.0.3
[    2.551082] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    2.551139] ledtrig-cpu: registered to indicate activity on CPUs
[    2.551991] NET: Registered protocol family 10
[    2.564133] Segment Routing with IPv6
[    2.564183] NET: Registered protocol family 17
[    2.564203] Key type dns_resolver registered
[    2.564569] RAS: Correctable Errors collector initialized.
[    2.564642] microcode: sig=0x1067a, pf=0x80, revision=0xa0b
[    2.564762] microcode: Microcode Update Driver: v2.2.
[    2.565106] registered taskstats version 1
[    2.565122] Loading compiled-in X.509 certificates
[    2.573133] Loaded X.509 cert 'Build time autogenerated kernel key: 039842e4c5826cfde4aee35bb7ba969e0b39b60f'
[    2.573185] zswap: loaded using pool lzo/zbud
[    2.584709] Key type big_key registered
[    2.584717] Key type trusted registered
[    2.588658] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.590771] Key type encrypted registered
[    2.590777] AppArmor: AppArmor sha1 policy hashing enabled
[    2.590782] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    2.590831] evm: HMAC attrs: 0x1
[    2.591770]   Magic number: 10:755:989
[    2.591985] rtc_cmos 00:02: setting system clock to 2018-03-26 13:59:38 UTC (1522072778)
[    2.592643] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.592645] EDD information not available.
[    2.592787] PM: Hibernation image not present or could not be loaded.
[    2.599620] Freeing unused kernel memory: 2364K
[    2.599625] Write protecting the kernel read-only data: 18432k
[    2.601518] Freeing unused kernel memory: 2024K
[    2.602132] Freeing unused kernel memory: 88K
[    2.607502] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.607504] x86/mm: Checking user space page tables
[    2.612292] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.008093] usb 6-2: new low-speed USB device number 2 using uhci_hcd
[    3.196086] usb 6-2: New USB device found, idVendor=046d, idProduct=c016
[    3.196091] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.196096] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1140f3fb041, max_idle_ns: 440795235870 ns
[    3.196098] usb 6-2: Product: Optical USB Mouse
[    3.196101] usb 6-2: Manufacturer: Logitech
[    3.207838] hidraw: raw HID events driver (C) Jiri Kosina
[    3.225519] usbcore: registered new interface driver usbhid
[    3.225522] usbhid: USB HID core driver
[    3.230356] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/0003:046D:C016.0001/input/input9
[    3.230684] hid-generic 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-2/input0
[    3.616051] usb 2-4: new high-speed USB device number 3 using ehci-pci
[    3.765458] usb 2-4: New USB device found, idVendor=12d1, idProduct=1f01
[    3.765463] usb 2-4: New USB device strings: Mfr=3, Product=2, SerialNumber=5
[    3.765466] usb 2-4: Product: HUAWEI Mobile
[    3.765470] usb 2-4: Manufacturer: HUAWEI Technology
[    3.765473] usb 2-4: SerialNumber: FFFFFFFFFFFFFFFF
[    3.866584] sdhci: Secure Digital Host Controller Interface driver
[    3.866586] sdhci: Copyright(c) Pierre Ossman
[    3.870216] sdhci-pci 0000:06:00.0: SDHCI controller found [197b:2382] (rev 80)
[    3.872995] jme: JMicron JMC2XX ethernet driver version 1.0.8
[    3.874379] mmc0: SDHCI controller on PCI [0000:06:00.0] using ADMA
[    3.874429] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 80)
[    3.874559] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[    3.884555] jme 0000:06:00.5: can't disable ASPM; OS doesn't have ASPM control
[    3.885742] jme 0000:06:00.5 eth0: JMC250 Gigabit Ethernet chiprev:23 pcirev:3 macaddr:00:90:f5:a4:ca:63
[    3.903488] ahci 0000:00:1f.2: version 3.0
[    3.903812] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    3.903847] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[    3.903853] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc sxs 
[    3.923732] scsi host0: ahci
[    3.933026] scsi host1: ahci
[    3.942467] scsi host2: ahci
[    3.948124] scsi host3: ahci
[    3.948269] ata1: SATA max UDMA/133 abar m2048@0xf8904000 port 0xf8904100 irq 24
[    3.948272] ata2: DUMMY
[    3.948274] ata3: DUMMY
[    3.948276] ata4: DUMMY
[    3.950784] pci 0000:00:00.0: Intel GM45 Chipset
[    3.950821] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    3.951313] pci 0000:00:00.0: detected 32768K stolen memory
[    3.951352] [drm] Memory usable by graphics device = 2048M
[    3.951358] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[    3.951360] fb: switching to inteldrmfb from VESA VGA
[    3.951413] Console: switching to colour dummy device 80x25
[    3.951705] [drm] Replacing VGA console driver
[    3.953116] usb-storage 2-4:1.0: USB Mass Storage device detected
[    3.953304] scsi host4: usb-storage 2-4:1.0
[    3.953456] usbcore: registered new interface driver usb-storage
[    3.956950] usbcore: registered new interface driver uas
[    4.012511] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.012514] [drm] Driver supports precise vblank timestamp query.
[    4.018387] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.035437] jme 0000:06:00.5 enp6s0f5: renamed from eth0
[    4.076201] [drm] RC6 disabled, disabling runtime PM support
[    4.078929] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[    4.079254] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    4.085468] acpi device:04: registered as cooling_device2
[    4.086024] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[    4.424045] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.424748] ata1.00: ATA-10: WDC WD5000LPCX-22VHAT0, 01.01A01, max UDMA/133
[    4.424752] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    4.425486] ata1.00: configured for UDMA/133
[    4.425798] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000LPCX-2 1A01 PQ: 0 ANSI: 5
[    4.456436] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.456758] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    4.456762] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    4.456794] sd 0:0:0:0: [sda] Write Protect is off
[    4.456799] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.456856] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.520148]  sda: sda1 sda2 < sda5 >
[    4.520949] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.674454] psmouse serio4: synaptics: queried max coordinates: x [..5378], y [..4546]
[    4.731046] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa42000/0xa0000/0x0, board id: 0, fw id: 504741
[    4.766613] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
[    4.956949] scsi 4:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[    4.958566] sr 4:0:0:0: [sr0] scsi-1 drive
[    4.958570] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.958845] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    4.959042] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    5.751068] fbcon: inteldrmfb (fb0) is primary device
[    5.751210] Console: switching to colour frame buffer device 170x48
[    5.751272] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   11.600761] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   12.796250] random: crng init done
[   13.274563] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   13.274886] systemd[1]: Detected architecture x86-64.
[   13.276872] systemd[1]: Set hostname to <patrick-W830T-W840T>.
[   15.175916] systemd[1]: Listening on Journal Audit Socket.
[   15.176214] systemd[1]: Listening on LVM2 metadata daemon socket.
[   15.176336] systemd[1]: Listening on udev Control Socket.
[   15.176622] systemd[1]: Created slice System Slice.
[   15.176766] systemd[1]: Listening on Journal Socket (/dev/log).
[   15.176810] systemd[1]: Reached target User and Group Name Lookups.
[   15.176858] systemd[1]: Reached target Encrypted Volumes.
[   16.891061] lp: driver loaded but no devices found
[   17.004245] ppdev: user-space parallel port driver
[   26.186260] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[   26.310573] systemd-journald[270]: Received request to flush runtime journal from PID 1
[   27.351926] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   27.461770] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170531/utaddress-247)
[   27.461785] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   27.461790] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20170531/utaddress-247)
[   27.461798] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   27.461799] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20170531/utaddress-247)
[   27.461807] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   27.461809] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   27.810616] rtl8192se: FW Power Save off (module option)
[   27.814412] rtl8192se: Driver for Realtek RTL8192SE/RTL8191SE
               Loading firmware rtlwifi/rtl8192sefw.bin
[   27.843651] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   27.850390] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   27.850397] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   27.850402] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   27.850405] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   27.850408] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   27.850412] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[   27.850416] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   27.856616] intel_powerclamp: No package C-state available
[   27.875447] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   27.875592] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   27.875737] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   28.296929] sr 4:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   28.296935] sr 4:0:0:0: [sr0] tag#0 Sense Key : Medium Error [current] 
[   28.296940] sr 4:0:0:0: [sr0] tag#0 Add. Sense: Unrecovered read error
[   28.296946] sr 4:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 ff fe 00 00 02 00
[   28.296950] print_req_error: critical medium error, dev sr0, sector 262136
[   28.298669] sr 4:0:0:0: [sr0] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[   28.298674] sr 4:0:0:0: [sr0] tag#0 Sense Key : Medium Error [current] 
[   28.298679] sr 4:0:0:0: [sr0] tag#0 Add. Sense: Unrecovered read error
[   28.298684] sr 4:0:0:0: [sr0] tag#0 CDB: Read(10) 28 00 00 00 ff fe 00 00 02 00
[   28.298688] print_req_error: critical medium error, dev sr0, sector 262136
[   28.298694] Buffer I/O error on dev sr0, logical block 32767, async page read
[   28.591901] rtl8192se 0000:02:00.0 wlp2s0: renamed from wlan0
[   31.344851] Adding 2056188k swap on /dev/mapper/ubuntu--vg-swap_1.  Priority:-1 extents:1 across:2056188k FS
[   31.464492] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[   31.512180] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[   32.255959] audit: type=1400 audit(1522072808.163:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=761 comm="apparmor_parser"
[   32.255969] audit: type=1400 audit(1522072808.163:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=761 comm="apparmor_parser"
[   32.273049] audit: type=1400 audit(1522072808.181:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=762 comm="apparmor_parser"
[   32.273058] audit: type=1400 audit(1522072808.181:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=762 comm="apparmor_parser"
[   32.273063] audit: type=1400 audit(1522072808.181:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=762 comm="apparmor_parser"
[   32.273068] audit: type=1400 audit(1522072808.181:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=762 comm="apparmor_parser"
[   32.293663] audit: type=1400 audit(1522072808.201:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4206/usr/lib/snapd/snap-confine" pid=764 comm="apparmor_parser"
[   32.293672] audit: type=1400 audit(1522072808.201:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4206/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=764 comm="apparmor_parser"
[   32.293677] audit: type=1400 audit(1522072808.201:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4206/usr/lib/snapd/snap-confine//snap_update_ns" pid=764 comm="apparmor_parser"
[   32.351780] audit: type=1400 audit(1522072808.259:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="webbrowser-app" pid=768 comm="apparmor_parser"
[   37.762517] usb 2-4: USB disconnect, device number 3
[   37.821097] IPv6: ADDRCONF(NETDEV_UP): enp6s0f5: link is not ready
[   37.848817] jme 0000:06:00.5 enp6s0f5: Link is down
[   37.848954] IPv6: ADDRCONF(NETDEV_UP): enp6s0f5: link is not ready
[   37.872480] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   38.038387] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   38.293231] usb 2-4: new high-speed USB device number 4 using ehci-pci
[   38.449798] usb 2-4: New USB device found, idVendor=12d1, idProduct=14db
[   38.449804] usb 2-4: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[   38.449808] usb 2-4: Product: HUAWEI Mobile
[   38.449811] usb 2-4: Manufacturer: HUAWEI Technology
[   38.486518] cdc_ether 2-4:1.0 eth0: register 'cdc_ether' at usb-0000:00:1d.7-4, CDC Ethernet Device, 58:2c:80:13:92:63
[   38.494701] usbcore: registered new interface driver cdc_ether
[   38.523895] cdc_ether 2-4:1.0 enx582c80139263: renamed from eth0
[   38.560853] IPv6: ADDRCONF(NETDEV_UP): enx582c80139263: link is not ready
[   38.561274] cdc_ether 2-4:1.0 enx582c80139263: kevent 12 may have been dropped
[   39.224892] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   40.432348] kauditd_printk_skb: 18 callbacks suppressed
[   40.432351] audit: type=1400 audit(1522072816.340:30): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/4206/usr/lib/snapd/snap-confine" pid=1065 comm="apparmor_parser"
[   40.456638] audit: type=1400 audit(1522072816.364:31): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/4206/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1065 comm="apparmor_parser"
[   40.457105] audit: type=1400 audit(1522072816.365:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/core/4206/usr/lib/snapd/snap-confine//snap_update_ns" pid=1065 comm="apparmor_parser"
[   40.471977] audit: type=1400 audit(1522072816.379:33): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=1067 comm="apparmor_parser"
[   40.898095] audit: type=1400 audit(1522072816.806:34): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.viking-gps.viking" pid=1073 comm="apparmor_parser"
[  211.995184] perf: interrupt took too long (2508 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[  411.841607] perf: interrupt took too long (3139 > 3135), lowering kernel.perf_event_max_sample_rate to 63500
[  492.714200] perf: interrupt took too long (3931 > 3923), lowering kernel.perf_event_max_sample_rate to 50750
[  708.102084] perf: interrupt took too long (4955 > 4913), lowering kernel.perf_event_max_sample_rate to 40250
[ 1005.130313] perf: interrupt took too long (6219 > 6193), lowering kernel.perf_event_max_sample_rate to 32000
[ 2162.480096] usb 6-1: new full-speed USB device number 3 using uhci_hcd
[ 2162.658469] usb 6-1: New USB device found, idVendor=1163, idProduct=0300
[ 2162.658478] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2162.658482] usb 6-1: Product: Garmin USB inReach
[ 2162.658485] usb 6-1: Manufacturer: Garmin
[ 2162.668330] hid-generic 0003:1163:0300.0002: hiddev0,hidraw1: USB HID v1.00 Device [Garmin Garmin USB inReach] on usb-0000:00:1d.0-1/input0
[ 2379.464126] usb 6-1: USB disconnect, device number 3
[ 2382.456054] usb 6-1: new full-speed USB device number 4 using uhci_hcd
[ 2382.633646] usb 6-1: New USB device found, idVendor=1163, idProduct=0300
[ 2382.633651] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2382.633655] usb 6-1: Product: Garmin USB inReach
[ 2382.633658] usb 6-1: Manufacturer: Garmin
[ 2382.643466] hid-generic 0003:1163:0300.0003: hiddev0,hidraw1: USB HID v1.00 Device [Garmin Garmin USB inReach] on usb-0000:00:1d.0-1/input0
[ 2681.264176] audit: type=1400 audit(1522075457.172:35): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/var/lib/snapd/desktop/applications/mimeinfo.cache" pid=3831 comm="evince" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 2681.264797] audit: type=1400 audit(1522075457.172:36): apparmor="DENIED" operation="open" profile="/usr/bin/evince" name="/var/lib/snapd/desktop/applications/mimeinfo.cache" pid=3831 comm="evince" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 4291.380287] audit: type=1400 audit(1522077067.288:37): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4206/usr/lib/snapd/snap-confine" pid=4541 comm="apparmor_parser"
[ 4291.381346] audit: type=1400 audit(1522077067.289:38): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4206/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=4541 comm="apparmor_parser"
[ 4291.381979] audit: type=1400 audit(1522077067.289:39): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4206/usr/lib/snapd/snap-confine//snap_update_ns" pid=4541 comm="apparmor_parser"
[ 4291.769762] audit: type=1400 audit(1522077067.677:40): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=4543 comm="apparmor_parser"
[ 4325.457402] audit: type=1400 audit(1522077101.365:41): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.viking-gps.viking" pid=4656 comm="apparmor_parser"
[ 4327.433791] audit: type=1400 audit(1522077103.341:42): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4206/usr/lib/snapd/snap-confine" pid=4663 comm="apparmor_parser"
[ 4327.434444] audit: type=1400 audit(1522077103.342:43): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4206/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=4663 comm="apparmor_parser"
[ 4327.434981] audit: type=1400 audit(1522077103.342:44): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4206/usr/lib/snapd/snap-confine//snap_update_ns" pid=4663 comm="apparmor_parser"
[ 4327.483911] audit: type=1400 audit(1522077103.391:45): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=4665 comm="apparmor_parser"
[ 6740.523411] audit: type=1400 audit(1522079516.431:46): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4206/usr/lib/snapd/snap-confine" pid=5221 comm="apparmor_parser"
[ 6740.524864] audit: type=1400 audit(1522079516.432:47): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4206/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=5221 comm="apparmor_parser"
[ 6740.525907] audit: type=1400 audit(1522079516.433:48): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/core/4206/usr/lib/snapd/snap-confine//snap_update_ns" pid=5221 comm="apparmor_parser"
[ 6740.722428] audit: type=1400 audit(1522079516.630:49): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.core.hook.configure" pid=5223 comm="apparmor_parser"
[ 6832.800128] usb 6-1: USB disconnect, device number 4
[ 7372.960105] usb 6-1: new full-speed USB device number 5 using uhci_hcd
[ 7373.140051] usb 6-1: New USB device found, idVendor=1163, idProduct=0300
[ 7373.140056] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7373.140062] usb 6-1: Product: Garmin USB inReach
[ 7373.140066] usb 6-1: Manufacturer: Garmin
[ 7373.149004] hid-generic 0003:1163:0300.0004: hiddev0,hidraw1: USB HID v1.00 Device [Garmin Garmin USB inReach] on usb-0000:00:1d.0-1/input0
[16565.312128] usb 6-1: USB disconnect, device number 5
[16583.528094] usb 2-1: new high-speed USB device number 8 using ehci-pci
[16583.677327] usb 2-1: New USB device found, idVendor=04e8, idProduct=6860
[16583.677333] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[16583.677336] usb 2-1: Product: SAMSUNG_Android
[16583.677340] usb 2-1: Manufacturer: SAMSUNG
[16583.677343] usb 2-1: SerialNumber: 420009440717a400
[16585.800805] cdc_acm 2-1:1.1: ttyACM0: USB ACM device
[16585.803363] usbcore: registered new interface driver cdc_acm
[16585.803367] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[17445.361562] usb 2-1: USB disconnect, device number 8
[17454.408087] usb 6-1: new full-speed USB device number 6 using uhci_hcd
[17454.588325] usb 6-1: New USB device found, idVendor=1163, idProduct=0300
[17454.588330] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[17454.588334] usb 6-1: Product: Garmin USB inReach
[17454.588338] usb 6-1: Manufacturer: Garmin
[17454.597222] hid-generic 0003:1163:0300.0005: hiddev0,hidraw1: USB HID v1.00 Device [Garmin Garmin USB inReach] on usb-0000:00:1d.0-1/input0
[17483.408180] usb 6-1: USB disconnect, device number 6
[17485.908107] usb 6-1: new full-speed USB device number 7 using uhci_hcd
[17486.086522] usb 6-1: New USB device found, idVendor=1163, idProduct=0300
[17486.086528] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[17486.086532] usb 6-1: Product: Garmin USB inReach
[17486.086535] usb 6-1: Manufacturer: Garmin
[17486.095427] hid-generic 0003:1163:0300.0006: hiddev0,hidraw1: USB HID v1.00 Device [Garmin Garmin USB inReach] on usb-0000:00:1d.0-1/input0

pour lsusb:

Bus 002 Device 004: ID 12d1:14db Huawei Technologies Co., Ltd. E353/E3131
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 006 Device 007: ID 1163:0300 DeLorme Publishing, Inc. 
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Note: delorme est l'ancien fabricant de ce matériel racheté par garmin

Note2: désolé c'est mon premier post sur le forum je ne sais pas mettre en forme le texte collé depuis le terminal correctement... ok corrigé

Dernière modification par trackip (Le 26/03/2018, à 21:37)

Hors ligne

#4 Le 26/03/2018, à 21:00

lann

Re : communication ordinateur/GPS Garmin inReach explorer+

trackip a écrit :

Note2: désolé c'est mon premier post sur le forum je ne sais pas mettre en forme le texte collé depuis le terminal correctement...

Il faut le mettre entre balise code, l'icône <>

Tu dois avoir dans le dossier /dev, ton périphérique
Que donnes

ls /dev

Hors ligne

#5 Le 26/03/2018, à 21:11

trackip

Re : communication ordinateur/GPS Garmin inReach explorer+

ls /dev donne ça:

autofs           i2c-7               sda       tty3   tty61      ttyS6
block            i2c-8               sda1      tty30  tty62      ttyS7
bsg              initctl             sda2      tty31  tty63      ttyS8
btrfs-control    input               sda5      tty32  tty7       ttyS9
bus              kmsg                sg0       tty33  tty8       ubuntu-vg
char             kvm                 shm       tty34  tty9       uhid
console          lightnvm            snapshot  tty35  ttyprintk  uinput
core             log                 snd       tty36  ttyS0      urandom
cpu              loop0               stderr    tty37  ttyS1      usb
cpu_dma_latency  loop1               stdin     tty38  ttyS10     userio
cuse             loop2               stdout    tty39  ttyS11     vcs
disk             loop3               tty       tty4   ttyS12     vcs1
dm-0             loop4               tty0      tty40  ttyS13     vcs2
dm-1             loop5               tty1      tty41  ttyS14     vcs3
dri              loop6               tty10     tty42  ttyS15     vcs4
drm_dp_aux0      loop7               tty11     tty43  ttyS16     vcs5
drm_dp_aux1      loop-control        tty12     tty44  ttyS17     vcs6
drm_dp_aux2      mapper              tty13     tty45  ttyS18     vcsa
ecryptfs         mcelog              tty14     tty46  ttyS19     vcsa1
fb0              mem                 tty15     tty47  ttyS2      vcsa2
fd               memory_bandwidth    tty16     tty48  ttyS20     vcsa3
full             mqueue              tty17     tty49  ttyS21     vcsa4
fuse             net                 tty18     tty5   ttyS22     vcsa5
hidraw0          network_latency     tty19     tty50  ttyS23     vcsa6
hidraw1          network_throughput  tty2      tty51  ttyS24     vfio
hpet             null                tty20     tty52  ttyS25     vga_arbiter
hugepages        port                tty21     tty53  ttyS26     vhci
hwrng            ppp                 tty22     tty54  ttyS27     vhost-net
i2c-0            psaux               tty23     tty55  ttyS28     vhost-vsock
i2c-1            ptmx                tty24     tty56  ttyS29     zero
i2c-2            pts                 tty25     tty57  ttyS3
i2c-3            random              tty26     tty58  ttyS30
i2c-4            rfkill              tty27     tty59  ttyS31
i2c-5            rtc                 tty28     tty6   ttyS4
i2c-6            rtc0                tty29     tty60  ttyS5

Hors ligne

#6 Le 26/03/2018, à 21:28

xubu1957

Re : communication ordinateur/GPS Garmin inReach explorer+

Bonjour,

Pour ajouter toi-même les balises code à ton précédent message #3 :     Merci      wink

  • Cliquer sur  le lien « Modifier » en bas à droite du message

  • Sélectionner le texte

  • Cliquer sur le <> de l'éditeur de message

1485703524.png

Dernière modification par xubu1957 (Le 28/03/2018, à 05:05)


Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#7 Le 28/03/2018, à 04:41

lann

Re : communication ordinateur/GPS Garmin inReach explorer+

Tu as un périphérique usb dans /dev. Il s'apelle usb. Ça doit être ton GPS
Essayes d’interagir avec

Hors ligne

#8 Le 28/03/2018, à 14:49

trackip

Re : communication ordinateur/GPS Garmin inReach explorer+

Déja merci pour l'intérêt que tu porte à mon problème.

ensuite je ne suis pas bien sur de comprendre ce qu'il faut faire suite à ta dernière réponse.

Quand je regarde dans les fichiers, j'ai dans l'ordinateur, un dossier "dev" contenant un dossier "usb" contenant lui un fichier de type inconnu nommé "hiddev0" et me voila bien avancé....

Si ensuite j'essaie via GPSbabel d'extraire les fichier de ce répertoire (pas sur de faire la bonne manip) message d'erreur:

"Un problème a été détecté par GPSBabel.
Il y a eu une erreur à l'ouverture d'un fichier ou d'un port.

Le message d'erreur initial reporté par GPSBabel est :
[ERROR] XSERIAL: Cannot open serial port '/dev/usb/hiddev0': Permission denied
[ERROR] Cannot open serial port '/dev/usb/hiddev0'
GARMIN:Can't init /dev/usb/hiddev0"

Et si j'essaie avec viking (ajouter un nouveau calque / new layer / GPS / protocole GPS: Garmin, port série: usb: / valider.

Il me crée un nouveau calque mais qui ne contient rien alors que j'ai au moins une trace dans mon GPS...

N'est il pas possible, sous ubuntu, d'interagir avec ce GPS comme avec une clef usb / un appareil photo / disque dur externe ? ...
bref avec une icone qui apparaît dans la colonne des applications à gauche permettant d'accéder au contenu du périphérique usb et donc à mes fichiers trace quel que soit leur format?

Hors ligne

#9 Le 28/03/2018, à 14:54

trackip

Re : communication ordinateur/GPS Garmin inReach explorer+

Ah et autre détail:

Si dans viking je fait un clic droit sur le calque GPS nouvellement ajouté "télécharger depuis le GPS"

Nouveau message d'erreur:
"Erreur: impossible de trouver gpsbabel.
Appareil GPS: N/A"

Hors ligne

#10 Le 28/03/2018, à 15:05

LeJediGris

Re : communication ordinateur/GPS Garmin inReach explorer+

Salut,

Visiblement un PB de permission sur le device

C'est pas :

MODE="666"

Plutôt ?

A+


%NOINDEX%
Matos Asus Zenbook
"Home Made" Monstro: core i7 9700+32Go de mémoire+SSD QVO Samsung 1To +MoBo Asus Prime Z390P
+ "Terminator", core i5 3570, 16Go, SSD Intel 520 sous Mint 19.3, Freebox Revolution

Hors ligne

#11 Le 28/03/2018, à 18:04

trackip

Re : communication ordinateur/GPS Garmin inReach explorer+

salut,

du coup si j'ai bien compris il me faut modifier mon fichier: /etc/udev/rules.d/51-garmin.rules

en supprimant le 0 devant le 666 avec un "gksudo gedit"

Je viens d'essayer, le contenu du fichier est donc maintenant:

SUBSYSTEM=="usb", ATTR{idVendor}=="1163", ATTR{idProduct}=="0300", MODE="666"

Mais je n'arrive toujours pas mieux a communiquer avec le GPS ( mêmes messages d'erreur avec GPSbabel et vinking que en #8 et #9)

Sinon ma référence venait de la documentation https://doc.ubuntu-fr.org/gps point 2.4
(même si j'ai suivi comme un bon petit singe les étapes de création sans rien comprendre à ce que je faisait!)

Hors ligne

#12 Le 28/03/2018, à 19:44

lann

Re : communication ordinateur/GPS Garmin inReach explorer+

Peux-tu fournir la ligne de commande que tu utilises avec gpsbabel ?

Hors ligne

#13 Le 28/03/2018, à 19:57

trackip

Re : communication ordinateur/GPS Garmin inReach explorer+

J'utilise GPSbabel avec l'interface graphique Gebabbel

et le dernier  essai que j'ai tenté correspond à la lignes de commande suivante:

gpsbabel -w -r -t -Sn -Si -i garmin -f /dev/usb/hiddev0 -o gpx -F /home/patrick/GarminRoutes.gpx

Hors ligne

#14 Le 28/03/2018, à 21:40

lann

Re : communication ordinateur/GPS Garmin inReach explorer+

Voilà ce qu'il y a dans mon fichier /etc/udev/rules.d/51-garmin.rules :

ATTR{idVendor}=="091e", ATTR{idProduct}=="0003", MODE="0666"

Comparé à toi, j'ai gardé le 0 dans le MODE et je n'ai pas "SUBSYSTEM"

De plus ma ligne de commande est celle-ci:

gpsbabel -w -r -t -Si -i gpx -f /home/lann/xxx.gpx -o garmin -F /dev/ttyUSB0

Comparé à la tienne, je n'ai pas de dossier après /dev mais directement mon GPS

Essayes peut-être en ne mettant que /dev/usb

Hors ligne