Contenu | Rechercher | Menus

Annonce

L'équipe des administrateurs et modérateurs du forum vous invite à prendre connaissance des nouvelles règles.
En cas de besoin, vous pouvez intervenir dans cette discussion.

Ubuntu 18.04 LTS
Ubuntu-fr propose des clés USB de Ubuntu et toutes ses « saveurs » ainsi qu'un magnifique t-shirt pour cette toute nouvelle version d'Ubuntu !

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 09/04/2018, à 20:38

Joshrek

[contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

Bonjour,
J'ai un Ultrabook Terra sur lequel j'ai installé Ubuntu 16.04 et Kali en dual boot (grub2)
Mon pavé tactile a cessé de fonctionner juste après l'installation. Il fonctionnait durant pour les deux systèmes et juste après au premier boot, puis rien au redémarrage. J'ai recommencé deux fois les deux installations, même problème.
J'ai un bouton pour activer ou désactiver le pavé tactile qui a même fonctionné au premier boot sous Ubuntu.
Avec une souris en USB tout marche parfaitement. Pour information l'ultrabook était avant sous Windows 10 et le pavé tactile fonctionnait, donc je m'oriente vers un souci logiciel.

J'ai essayé pour l'activer :

synclient TouchpadOff=0
gconftool --type bool --set /desktop/gnome/peripherals/touchpad/touchpad_enabled true

ajout de i8042.nomux à Grub

Il semblerait sur les forums que ce soit un bug du noyau
J'ai tenté d'ajouter au noyau le paramètre i8042.nopnp, mais je ne sais pas trop comment m'y prendre sans compromettre mon système.
J'ai vu sur cette page (https://wiki.ubuntu.com/DebuggingTouchpadDetection) que je pouvais reporter un bug...
Seulement j'aimerai une solution plus simple et de plus je n'arrive pas à avoir les caractéristiques du touchpad...

J'ai essayé les commandes ci-dessous pour en connaître les caractéristiques :

egrep -i 'synap|alps|etps' /proc/bus/input/devices
xinput list "$(egrep -i 'synap|alps|etps' /proc/bus/input/devices |cut -d'"' -f2)"

Hardware Lister ne me donne non plus aucune information :

Terra Mobile Ultrabook 1450 II (OEM)
Fabriquant : Wortmann
Architecture 64 bits
Carte mère Chiefriver Intel
BIOS American Megatrends X300V TR.2
Mémoire DDR3 Elpida 4 GiB (1 slot)
Processeur Intel Core i5-33337U @ 1.80 GHz
Disque dur SSD Toshiba THNSNJ12 128 Go

Dans Host Bridge j'ai :

VGA compatible controller : 3rd generation Core processor Graphics Controller Intel 8086
USB Controller : 7 series/C210 series
Communication Controller
USB Controller
Audio device
PCI Bridge
PCI Bridge
USB Controller
ISA Bridge : HM77 Express Chpipset LPC
SATA controller pour le SSD
SMBus

Et je ne sais pas sur lequel de ces périphériques se branche la nappe du touchpad

J'ai donc démonté l'ordinateur pour avoir accès directement au touchpad et pris une photo.
Il n'y a a priori aucune indication quant au fabricant.
Voici les indications que j'ai pu relever sur le circuit imprimé :
- une étiquette à code barre collée : T1310001937 TAIWAN-2F
- un logo : TUV Rheinland Product Safety
- un 2ème logo (de contrôle ?) : CEPBRFLEOC6001 01-13 F94V-0
- un 3ème logo : CSR 273467
Et sur la nappe : XUNWEI E351578 AWM 20624 80C 60V VW-1

Voilà...
Vous me direz : ben la souris en USB elle fonctionne, alors pourquoi se prendre la tête...
Oui, pourquoi ?
Merci pour vos réponses...

Dernière modification par Joshrek (Le 29/04/2018, à 15:47)

Hors ligne

#2 Le 13/04/2018, à 19:24

Naziel

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

Bonjour,

Tu peux donner le retour de

xinput --list

J'aimerais bien avoir le modèle du pc, c'est écrit sur l'étiquette collée sous le pc

Dernière modification par Naziel (Le 13/04/2018, à 19:25)

Hors ligne

#3 Le 14/04/2018, à 11:12

Joshrek

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

Bonjour Naziel,

TERRA Mobile Ultrabook 1450 II
Model FR1220273

xinput --list
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ USB Optical Mouse                       	id=10	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Power Button                            	id=6	[slave  keyboard (3)]
    ↳ Video Bus                               	id=7	[slave  keyboard (3)]
    ↳ Power Button                            	id=8	[slave  keyboard (3)]
    ↳ Sleep Button                            	id=9	[slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard            	id=11	[slave  keyboard (3)]

USB Optical Mouse c'est la souris en USB dont je me sers.

Dernière modification par Joshrek (Le 14/04/2018, à 17:30)

Hors ligne

#4 Le 14/04/2018, à 11:36

Naziel

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

Ah oui, effectivement, le touchpad apparaît même pas dans le retour précédent, je pensais qu'il serait listé. Tu pourrais redonner le retour de la même commande mais sur le live usb? Tu as installé ubuntu avec des paramètres noyaux particuliers (genre i8042.nomux ou autre)?
C'est bizarre, tout ce que je trouve sur ce pc est en Allemand (et google traduction, c'est pas génial)

Dernière modification par Naziel (Le 14/04/2018, à 11:36)

Hors ligne

#5 Le 14/04/2018, à 11:43

xubu1957

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

Bonjour,

@ Naziel

Et tester avec un noyau supérieur ?

> [Résolu] Touchpad non reconnu sous ubuntu 16.04.3 (lenovo ideapad 320).


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300 - HP 7100 DC - Asus 1015BX -Fujitsu Siemens Scaleo J3000  Membre de Linux-Azur

Hors ligne

#6 Le 14/04/2018, à 12:24

Naziel

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

@xubu1957: pourquoi pas, mais c'est bizarre que ça fonctionne sur le noyau présent sur le live usb. Si c'est un bug du noyau, ça va normalement le résoudre.

Donc pour passer sur un noyau plus récent, je te laisse faire dans un terminal (je suis la doc)

sudo apt-add-repository -y ppa:teejee2008/ppa
sudo apt-get update
sudo apt-get install ukuu

puis tu tentes d'installer un noyau 4.14 (le 4.14.5 par exemple). Surtout ne prends pas de noyau rc (release candidate). Si l'install ne marche pas, redémarre le pc et reteste, ça m'avait débloqué la situation dans mon cas. Ensuite, tu redémarres puis dans le menu grub, tu choisis options avancées d'ubuntu, et tu démarres sur le noyau fraîchement installé. Et tu testes le touchpad.

Tu peux donner le retour de

cat /etc/default/grub | grep GRUB_CMDLINE_LINUX

qu'on voit quels paramètres sont passés par défaut.

Edit: j'avais pas vu que des noyaux 4.16 sont sortis, ça peut peut être valoir le coup d'en essayer un aussi

Dernière modification par Naziel (Le 14/04/2018, à 12:25)

Hors ligne

#7 Le 14/04/2018, à 12:48

xubu1957

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

@ Naziel

Une autre info :

Le 19/03/2018, xubu a écrit :

(edit=date)

Je viens de voir un bug > /ubuntu/+source/xserver-xorg-input-synaptics/+bug

David Gesrob (david81br) wrote on 2017-12-22:    #11 a écrit :

I've fixed the issue installing the newest stable Kernel 4.14.8.
J'ai corrigé le problème en installant le plus récent noyau stable 4.14.14.8.

> [Résolu] touchpad problème...sur lenovo 320-15isk.

Dernière modification par xubu1957 (Le 14/04/2018, à 12:49)


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300 - HP 7100 DC - Asus 1015BX -Fujitsu Siemens Scaleo J3000  Membre de Linux-Azur

Hors ligne

#8 Le 14/04/2018, à 16:47

Joshrek

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

Déjà en Live USB (Ubuntu 16.04.4 AMD64) le pavé fonctionne.

xinput --list
⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ USB Optical Mouse                       	id=10	[slave  pointer  (2)]
⎜   ↳ FSPPS/2 Sentelic FingerSensingPad       	id=12	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ Power Button                            	id=6	[slave  keyboard (3)]
    ↳ Video Bus                               	id=7	[slave  keyboard (3)]
    ↳ Power Button                            	id=8	[slave  keyboard (3)]
    ↳ Sleep Button                            	id=9	[slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard            	id=11	[slave  keyboard (3)]

J'ai utilisé cette image pour l'installation, en standard, sans noyaux particuliers.

Je vais donc m'attacher à passer à un noyau plus récent.

Dernière modification par Joshrek (Le 14/04/2018, à 17:31)

Hors ligne

#9 Le 14/04/2018, à 17:08

cqfd93

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

Modération

Bonjour,

Pour ajouter toi-même les balises code à tes messages #1 , #3 et #8 :

  • Cliquer sur le lien « Modifier » en bas à droite du message

  • Sélectionner le texte

  • Cliquer sur le <> de l'éditeur de message
    1471986854.png


cqfd93

En ligne

#10 Le 14/04/2018, à 17:55

Joshrek

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

J'ai installé UKUU et le noyau Linux 4.14.5
Le pavé tactile ne fonctionne toujours pas.
Pour info, les autres noyaux Linux installés sont :

  • Linux 4.13.0.38.57

  • Linux 4.13.0.38.43 ~16.04.1 (noyau en cours avant passage à la version 4.14.5)

  • Linux 4.13.0.38.40 ~16.04.1

Voici le retour de

cat /etc/default/grub | grep GRUB_CMDLINE_LINUX
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

Est-ce que je dois tester d'autres noyaux ?

Hors ligne

#11 Le 14/04/2018, à 18:00

xubu1957

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

Naziel a écrit :

Si l'install ne marche pas, redémarre le pc et reteste, ça m'avait débloqué la situation dans mon cas. Ensuite, tu redémarres puis dans le menu grub, tu choisis options avancées d'ubuntu, et tu démarres sur le noyau fraîchement installé. Et tu testes le touchpad.

Tu avais suivi ses consignes ?


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 16.04.1 LTS : Lenovo T410 - Toshiba Satellite A300 - HP 7100 DC - Asus 1015BX -Fujitsu Siemens Scaleo J3000  Membre de Linux-Azur

Hors ligne

#12 Le 14/04/2018, à 19:42

Joshrek

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

Oui, oui... et j'avais justement vérifié dans UKUU le noyau en cours.

Hors ligne

#13 Le 14/04/2018, à 20:04

Naziel

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

Bah normalement, les pilotes sont intégrés au noyau (en particulier ce genre de pilotes). Donc théoriquement ça devrait fonctionner. A partir de

FSPPS/2 Sentelic FingerSensingPad

j'ai fait beaucoup de recherches, et il a beaucoup d'infos mais datées.
En attendant que je trie tout ça, tu peux donner depuis le live usb le retour de

uname -a

(je me demande si tu aurais pas un noyau 4.4 sur le live usb)

Edit: tu peux vérifier que xserver-xorg-input-all est bien installé?


Le pilote est visiblement dans le noyau depuis quelques temps

Dernière modification par Naziel (Le 14/04/2018, à 20:23)

Hors ligne

#14 Le 14/04/2018, à 22:33

Joshrek

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

En direct du Live CD

ubuntu@ubuntu:~$ uname -a
Linux ubuntu 4.13.0-36-generic #40~16.04.1-Ubuntu SMP Fri Feb 16 23:25:58 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
ubuntu@ubuntu:~$ 

xserver-xorg-input-all n'est pas installé, c'est xserver-xorg-input-all-hwe-16.04 qui l'est  (d'après synaptic), je ne sais pas si ça fait une différence.

En tout cas merci pour les recherches !

Hors ligne

#15 Le 14/04/2018, à 23:29

Naziel

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

4.13.0-36-generic

Arf, ma théorie tombe à l'eau.

J'ai vérifié: dans les options de compilation du noyau linux, le pilote de ton touchpad est bien sur y, donc intégré au noyau (sous forme de module ou en dur, mais intégré)
J'ai trouvé de bonnes quantités d'anciennes discussions qui parlent de ce touchpad qui marche pas du tout, un ou deux ans plus tard on voit plein de discussions qui disent: il marche, mais se désactive pas quand je tape au clavier ou que le défilement ne fonctionne pas.
Tu peux tenter de passer le paramètre acpi=off (c'est pas une solution, c'est juste un test): pour cela, dans le menu grub, sur l'entrée ubuntu, tu fais e pour éditer le démarrage, puis entre quiet et splash tu ajoutes acpi=off, puis c'est F10 il me semble pour démarrer. Ca vient peut être du gestion de l'énergie un poil agressive, acpi c'est la gestion de l'énergie. Et bien évidemment tester le touchpad. Et pourquoi pas dire si

xinput list

liste ton touchpad
(et j'ai pas fini mes recherches, j'ai fait un petit résumé des liens utiles, mais il faut encore faire du tri)

Dernière modification par Naziel (Le 14/04/2018, à 23:31)

Hors ligne

#16 Le 15/04/2018, à 10:24

Joshrek

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

Essai infructueux, le touchpad n'est pas listé :

⎡ Virtual core pointer                    	id=2	[master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer              	id=4	[slave  pointer  (2)]
⎜   ↳ USB Optical Mouse                       	id=6	[slave  pointer  (2)]
⎣ Virtual core keyboard                   	id=3	[master keyboard (2)]
    ↳ Virtual core XTEST keyboard             	id=5	[slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard            	id=7	[slave  keyboard (3)]

J'ai essayé aussi le dernier noyau 4.16.2 et réessayé celui du Live CD 4.13.0.36 mais rien n'y fait.

C'est quand même fou ce pilote qui a fonctionné au premier boot après installation et s'est "désactivé" ensuite !

Je reste sur quel noyau au fait ?

Dernière modification par Joshrek (Le 15/04/2018, à 10:39)

Hors ligne

#17 Le 15/04/2018, à 11:00

Naziel

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

Au cas où: tu as essayé d'activer/désactiver le pavé tactile avec la combinaison de touches adéquate?
Tu peux donner le retour de

lsmod
cat /proc/bus/input/devices

(je pense que psmouse est le pilote, j'en trouve pas d'autre)
et après un redémarrage (ça limitera les infos) tu peux donner

cat /var/log/Xorg.0.log
dmesg

Edit: et tu peux essayer

sudo modprobe -r psmouse ; sudo modprobe psmouse

Reedit: rajout de commandes


Et pour le noyau, qui peut le plus peut le moins, donc peu importe le noyau choisi, ça devrait marcher.

Dernière modification par Naziel (Le 15/04/2018, à 11:04)

Hors ligne

#18 Le 15/04/2018, à 12:21

Joshrek

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

Alors...

A chaque essai j'ai activé / désactivé le touchpad avec le bouton approprié, sans succès (car je le rappelle ce bouton fonctionnait également au premier boot)

Voici les retours demandés :

lsmod
Module                  Size  Used by
rfcomm                 77824  2
ccm                    20480  3
bnep                   20480  2
nls_iso8859_1          16384  1
intel_rapl             20480  0
x86_pkg_temp_thermal    16384  0
intel_powerclamp       16384  0
coretemp               16384  0
kvm_intel             163840  0
kvm                   598016  1 kvm_intel
snd_hda_codec_hdmi     49152  1
arc4                   16384  2
irqbypass              16384  1 kvm
snd_hda_codec_realtek    98304  1
snd_hda_codec_generic    73728  1 snd_hda_codec_realtek
crct10dif_pclmul       16384  0
crc32_pclmul           16384  0
ghash_clmulni_intel    16384  0
iwldvm                229376  0
pcbc                   16384  0
snd_hda_intel          40960  3
mac80211              778240  1 iwldvm
snd_hda_codec         126976  4 snd_hda_intel,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
aesni_intel           188416  2
aes_x86_64             20480  1 aesni_intel
snd_hda_core           81920  5 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hwdep              20480  1 snd_hda_codec
btusb                  45056  0
crypto_simd            16384  1 aesni_intel
snd_pcm                98304  4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
glue_helper            16384  1 aesni_intel
btrtl                  16384  1 btusb
input_leds             16384  0
cryptd                 24576  3 crypto_simd,ghash_clmulni_intel,aesni_intel
snd_seq_midi           16384  0
btbcm                  16384  1 btusb
iwlwifi               282624  1 iwldvm
snd_seq_midi_event     16384  1 snd_seq_midi
serio_raw              16384  0
btintel                20480  1 btusb
intel_cstate           20480  0
intel_rapl_perf        16384  0
bluetooth             544768  31 btrtl,btintel,bnep,btbcm,rfcomm,btusb
snd_rawmidi            32768  1 snd_seq_midi
snd_seq                65536  2 snd_seq_midi_event,snd_seq_midi
ecdh_generic           24576  1 bluetooth
snd_seq_device         16384  3 snd_seq,snd_rawmidi,snd_seq_midi
cfg80211              626688  3 iwlwifi,mac80211,iwldvm
snd_timer              32768  2 snd_seq,snd_pcm
lpc_ich                24576  0
snd                    81920  17 snd_hda_intel,snd_hwdep,snd_seq,snd_hda_codec,snd_timer,snd_rawmidi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_seq_device,snd_hda_codec_realtek,snd_pcm
soundcore              16384  1 snd
mei_me                 40960  0
mei                    90112  1 mei_me
shpchp                 36864  0
mac_hid                16384  0
parport_pc             36864  0
ppdev                  20480  0
lp                     20480  0
parport                49152  3 lp,parport_pc,ppdev
autofs4                40960  2
hid_generic            16384  0
usbhid                 49152  0
hid                   122880  2 hid_generic,usbhid
i915                 1671168  83
i2c_algo_bit           16384  1 i915
drm_kms_helper        172032  1 i915
psmouse               147456  0
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
fb_sys_fops            16384  1 drm_kms_helper
ahci                   36864  3
drm                   401408  6 i915,drm_kms_helper
libahci                32768  1 ahci
r8169                  86016  0
mii                    16384  1 r8169
video                  40960  1 i915
cat /proc/bus/input/devices
I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
U: Uniq=
H: Handlers=kbd event0 
B: PROP=0
B: EV=3
B: KEY=4000 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
U: Uniq=
H: Handlers=kbd event1 
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
U: Uniq=
H: Handlers=event2 
B: PROP=0
B: EV=21
B: SW=1

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
U: Uniq=
H: Handlers=kbd event3 
B: PROP=0
B: EV=3
B: KEY=10000000000000 0

I: Bus=0011 Vendor=0001 Product=0001 Version=ab83
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input4
U: Uniq=
H: Handlers=sysrq kbd event4 leds 
B: PROP=0
B: EV=120013
B: KEY=402000000 3803078f800d001 feffffdfffefffff fffffffffffffffe
B: MSC=10
B: LED=7

I: Bus=0019 Vendor=0000 Product=0006 Version=0000
N: Name="Video Bus"
P: Phys=LNXVIDEO/video/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
U: Uniq=
H: Handlers=kbd event5 
B: PROP=0
B: EV=3
B: KEY=3e000b00000000 0 0 0

I: Bus=0003 Vendor=15ca Product=00c3 Version=0110
N: Name="USB Optical Mouse"
P: Phys=usb-0000:00:14.0-3/input0
S: Sysfs=/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:15CA:00C3.0001/input/input8
U: Uniq=
H: Handlers=mouse0 event6 
B: PROP=0
B: EV=17
B: KEY=70000 0 0 0 0
B: REL=103
B: MSC=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Mic"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
U: Uniq=
H: Handlers=event7 
B: PROP=0
B: EV=21
B: SW=10

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH Headphone"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
U: Uniq=
H: Handlers=event8 
B: PROP=0
B: EV=21
B: SW=4

I: Bus=0000 Vendor=0000 Product=0000 Version=0000
N: Name="HDA Intel PCH HDMI/DP,pcm=3"
P: Phys=ALSA
S: Sysfs=/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
U: Uniq=
H: Handlers=event9 
B: PROP=0
B: EV=21
B: SW=140

Après redémarrage

cat /var/log/Xorg.0.log
[     4.616] 
X.Org X Server 1.19.5
Release Date: 2017-10-12
[     4.616] X Protocol Version 11, Revision 0
[     4.616] Build Operating System: Linux 4.4.0-101-generic x86_64 Ubuntu
[     4.616] Current Operating System: Linux joker 4.16.2-041602-generic #201804121130 SMP Thu Apr 12 11:32:17 UTC 2018 x86_64
[     4.616] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.16.2-041602-generic root=UUID=a02deb83-27fd-45d9-b182-c07f76407262 ro quiet splash vt.handoff=7
[     4.616] Build Date: 24 November 2017  09:44:25AM
[     4.616] xorg-server 2:1.19.5-0ubuntu2~16.04.1 (For technical support please see http://www.ubuntu.com/support) 
[     4.616] Current version of pixman: 0.33.6
[     4.616] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     4.616] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     4.616] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 15 12:05:19 2018
[     4.617] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     4.617] (==) No Layout section.  Using the first Screen section.
[     4.617] (==) No screen section available. Using defaults.
[     4.617] (**) |-->Screen "Default Screen Section" (0)
[     4.617] (**) |   |-->Monitor "<default monitor>"
[     4.617] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     4.617] (==) Automatically adding devices
[     4.617] (==) Automatically enabling devices
[     4.617] (==) Automatically adding GPU devices
[     4.617] (==) Automatically binding GPU devices
[     4.617] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     4.618] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     4.618] 	Entry deleted from font path.
[     4.618] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[     4.618] 	Entry deleted from font path.
[     4.618] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[     4.618] 	Entry deleted from font path.
[     4.618] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[     4.618] 	Entry deleted from font path.
[     4.618] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[     4.618] 	Entry deleted from font path.
[     4.618] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[     4.618] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[     4.618] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     4.618] (II) Loader magic: 0x5580c19d0e00
[     4.618] (II) Module ABI versions:
[     4.618] 	X.Org ANSI C Emulation: 0.4
[     4.618] 	X.Org Video Driver: 23.0
[     4.618] 	X.Org XInput driver : 24.1
[     4.618] 	X.Org Server Extension : 10.0
[     4.618] (++) using VT number 7

[     4.618] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     4.619] (II) xfree86: Adding drm device (/dev/dri/card0)
[     4.634] (--) PCI:*(0:0:2:0) 8086:0166:1b50:571c rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[     4.634] (II) LoadModule: "glx"
[     4.635] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     4.644] (II) Module glx: vendor="X.Org Foundation"
[     4.644] 	compiled for 1.19.5, module version = 1.0.0
[     4.644] 	ABI class: X.Org Server Extension, version 10.0
[     4.644] (==) Matched modesetting as autoconfigured driver 0
[     4.644] (==) Matched fbdev as autoconfigured driver 1
[     4.644] (==) Matched vesa as autoconfigured driver 2
[     4.644] (==) Assigned the driver to the xf86ConfigLayout
[     4.644] (II) LoadModule: "modesetting"
[     4.644] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     4.644] (II) Module modesetting: vendor="X.Org Foundation"
[     4.644] 	compiled for 1.19.5, module version = 1.19.5
[     4.644] 	Module class: X.Org Video Driver
[     4.644] 	ABI class: X.Org Video Driver, version 23.0
[     4.644] (II) LoadModule: "fbdev"
[     4.644] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     4.644] (II) Module fbdev: vendor="X.Org Foundation"
[     4.644] 	compiled for 1.19.3, module version = 0.4.4
[     4.644] 	Module class: X.Org Video Driver
[     4.644] 	ABI class: X.Org Video Driver, version 23.0
[     4.644] (II) LoadModule: "vesa"
[     4.645] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     4.645] (II) Module vesa: vendor="X.Org Foundation"
[     4.645] 	compiled for 1.19.3, module version = 2.3.4
[     4.645] 	Module class: X.Org Video Driver
[     4.645] 	ABI class: X.Org Video Driver, version 23.0
[     4.645] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     4.645] (II) FBDEV: driver for framebuffer: fbdev
[     4.645] (II) VESA: driver for VESA chipsets: vesa
[     4.666] (II) modeset(0): using drv /dev/dri/card0
[     4.666] (WW) Falling back to old probe method for fbdev
[     4.666] (II) Loading sub module "fbdevhw"
[     4.666] (II) LoadModule: "fbdevhw"
[     4.666] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     4.666] (II) Module fbdevhw: vendor="X.Org Foundation"
[     4.666] 	compiled for 1.19.5, module version = 0.0.2
[     4.666] 	ABI class: X.Org Video Driver, version 23.0
[     4.666] (WW) Falling back to old probe method for vesa
[     4.666] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     4.666] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[     4.666] (==) modeset(0): RGB weight 888
[     4.666] (==) modeset(0): Default visual is TrueColor
[     4.666] (II) Loading sub module "glamoregl"
[     4.666] (II) LoadModule: "glamoregl"
[     4.666] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     4.673] (II) Module glamoregl: vendor="X.Org Foundation"
[     4.673] 	compiled for 1.19.5, module version = 1.0.0
[     4.673] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     4.673] (II) glamor: OpenGL accelerated X.org driver based.
[     4.691] (II) glamor: EGL version 1.4 (DRI2):
[     4.694] (II) modeset(0): glamor initialized
[     4.694] (II) modeset(0): Output LVDS-1 has no monitor section
[     4.695] (II) modeset(0): Output VGA-1 has no monitor section
[     4.697] (II) modeset(0): Output HDMI-1 has no monitor section
[     4.697] (II) modeset(0): Output DP-1 has no monitor section
[     4.697] (II) modeset(0): EDID for output LVDS-1
[     4.697] (II) modeset(0): Printing probed modes for output LVDS-1
[     4.697] (II) modeset(0): Modeline "1366x768"x59.9   72.00  1366 1380 1436 1502  768 769 772 800 -hsync -vsync (47.9 kHz P)
[     4.697] (II) modeset(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[     4.697] (II) modeset(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[     4.697] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[     4.697] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[     4.697] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[     4.697] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[     4.697] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[     4.697] (II) modeset(0): Modeline "960x600"x120.0   77.00  960 984 1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[     4.697] (II) modeset(0): Modeline "960x540"x120.0   69.25  960 984 1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[     4.697] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[     4.697] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[     4.697] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[     4.697] (II) modeset(0): Modeline "840x525"x120.0   73.12  840 892 980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[     4.697] (II) modeset(0): Modeline "840x525"x119.8   59.50  840 864 880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[     4.697] (II) modeset(0): Modeline "800x512"x120.3   51.56  800 800 828 832  512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[     4.697] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[     4.697] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[     4.697] (II) modeset(0): Modeline "720x450"x119.8   53.25  720 760 836 952  450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[     4.697] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[     4.697] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[     4.697] (II) modeset(0): Modeline "680x384"x119.6   42.38  680 716 784 888  384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[     4.697] (II) modeset(0): Modeline "680x384"x119.9   36.00  680 704 720 760  384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[     4.697] (II) modeset(0): Modeline "576x432"x120.1   40.81  576 608 668 760  432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[     4.697] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[     4.697] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[     4.697] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[     4.697] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[     4.698] (II) modeset(0): EDID for output VGA-1
[     4.700] (II) modeset(0): EDID for output HDMI-1
[     4.700] (II) modeset(0): EDID for output DP-1
[     4.700] (II) modeset(0): Output LVDS-1 connected
[     4.700] (II) modeset(0): Output VGA-1 disconnected
[     4.700] (II) modeset(0): Output HDMI-1 disconnected
[     4.700] (II) modeset(0): Output DP-1 disconnected
[     4.700] (II) modeset(0): Using exact sizes for initial modes
[     4.700] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[     4.700] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[     4.700] (==) modeset(0): DPI set to (96, 96)
[     4.700] (II) Loading sub module "fb"
[     4.700] (II) LoadModule: "fb"
[     4.700] (II) Loading /usr/lib/xorg/modules/libfb.so
[     4.700] (II) Module fb: vendor="X.Org Foundation"
[     4.700] 	compiled for 1.19.5, module version = 1.0.0
[     4.700] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     4.700] (II) UnloadModule: "fbdev"
[     4.700] (II) Unloading fbdev
[     4.700] (II) UnloadSubModule: "fbdevhw"
[     4.700] (II) Unloading fbdevhw
[     4.700] (II) UnloadModule: "vesa"
[     4.700] (II) Unloading vesa
[     4.700] (==) Depth 24 pixmap format is 32 bpp
[     4.772] (==) modeset(0): Backing store enabled
[     4.772] (==) modeset(0): Silken mouse enabled
[     4.772] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     4.800] (==) modeset(0): DPMS enabled
[     4.800] (II) modeset(0): [DRI2] Setup complete
[     4.800] (II) modeset(0): [DRI2]   DRI driver: i965
[     4.800] (II) modeset(0): [DRI2]   VDPAU driver: i965
[     4.800] (--) RandR disabled
[     4.804] (II) SELinux: Disabled on system
[     4.809] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[     4.809] (II) AIGLX: enabled GLX_ARB_create_context
[     4.809] (II) AIGLX: enabled GLX_ARB_create_context_profile
[     4.809] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[     4.809] (II) AIGLX: enabled GLX_INTEL_swap_event
[     4.809] (II) AIGLX: enabled GLX_SGI_swap_control
[     4.809] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[     4.809] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[     4.809] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[     4.809] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[     4.809] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[     4.810] (II) AIGLX: Loaded and initialized i965
[     4.810] (II) GLX: Initialized DRI2 GL provider for screen 0
[     4.811] (II) modeset(0): Damage tracking initialized
[     4.811] (II) modeset(0): Setting screen physical size to 361 x 203
[     4.845] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     4.845] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     4.845] (II) LoadModule: "evdev"
[     4.845] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[     4.847] (II) Module evdev: vendor="X.Org Foundation"
[     4.847] 	compiled for 1.19.3, module version = 2.10.5
[     4.847] 	Module class: X.Org XInput Driver
[     4.847] 	ABI class: X.Org XInput driver, version 24.1
[     4.847] (II) Using input driver 'evdev' for 'Power Button'
[     4.847] (**) Power Button: always reports core events
[     4.847] (**) evdev: Power Button: Device: "/dev/input/event3"
[     4.847] (--) evdev: Power Button: Vendor 0 Product 0x1
[     4.847] (--) evdev: Power Button: Found keys
[     4.847] (II) evdev: Power Button: Configuring as keyboard
[     4.847] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[     4.847] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     4.847] (**) Option "xkb_rules" "evdev"
[     4.847] (**) Option "xkb_model" "pc105"
[     4.847] (**) Option "xkb_layout" "fr"
[     4.865] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[     4.865] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     4.865] (II) Using input driver 'evdev' for 'Video Bus'
[     4.865] (**) Video Bus: always reports core events
[     4.865] (**) evdev: Video Bus: Device: "/dev/input/event5"
[     4.865] (--) evdev: Video Bus: Vendor 0 Product 0x6
[     4.865] (--) evdev: Video Bus: Found keys
[     4.865] (II) evdev: Video Bus: Configuring as keyboard
[     4.865] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event5"
[     4.865] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     4.865] (**) Option "xkb_rules" "evdev"
[     4.865] (**) Option "xkb_model" "pc105"
[     4.865] (**) Option "xkb_layout" "fr"
[     4.865] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     4.865] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     4.865] (II) Using input driver 'evdev' for 'Power Button'
[     4.865] (**) Power Button: always reports core events
[     4.865] (**) evdev: Power Button: Device: "/dev/input/event1"
[     4.866] (--) evdev: Power Button: Vendor 0 Product 0x1
[     4.866] (--) evdev: Power Button: Found keys
[     4.866] (II) evdev: Power Button: Configuring as keyboard
[     4.866] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[     4.866] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[     4.866] (**) Option "xkb_rules" "evdev"
[     4.866] (**) Option "xkb_model" "pc105"
[     4.866] (**) Option "xkb_layout" "fr"
[     4.866] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[     4.866] (II) No input driver specified, ignoring this device.
[     4.866] (II) This device may have been added with another device file.
[     4.866] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[     4.867] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     4.867] (II) Using input driver 'evdev' for 'Sleep Button'
[     4.867] (**) Sleep Button: always reports core events
[     4.867] (**) evdev: Sleep Button: Device: "/dev/input/event0"
[     4.867] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[     4.867] (--) evdev: Sleep Button: Found keys
[     4.867] (II) evdev: Sleep Button: Configuring as keyboard
[     4.867] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[     4.867] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     4.867] (**) Option "xkb_rules" "evdev"
[     4.867] (**) Option "xkb_model" "pc105"
[     4.867] (**) Option "xkb_layout" "fr"
[     4.868] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event6)
[     4.868] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[     4.868] (II) Using input driver 'evdev' for 'USB Optical Mouse'
[     4.868] (**) USB Optical Mouse: always reports core events
[     4.868] (**) evdev: USB Optical Mouse: Device: "/dev/input/event6"
[     4.928] (--) evdev: USB Optical Mouse: Vendor 0x15ca Product 0xc3
[     4.928] (--) evdev: USB Optical Mouse: Found 3 mouse buttons
[     4.928] (--) evdev: USB Optical Mouse: Found scroll wheel(s)
[     4.928] (--) evdev: USB Optical Mouse: Found relative axes
[     4.928] (--) evdev: USB Optical Mouse: Found x and y relative axes
[     4.928] (II) evdev: USB Optical Mouse: Configuring as mouse
[     4.928] (II) evdev: USB Optical Mouse: Adding scrollwheel support
[     4.928] (**) evdev: USB Optical Mouse: YAxisMapping: buttons 4 and 5
[     4.928] (**) evdev: USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[     4.928] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:15CA:00C3.0001/input/input8/event6"
[     4.928] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 10)
[     4.928] (II) evdev: USB Optical Mouse: initialized for relative axes.
[     4.928] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[     4.928] (**) USB Optical Mouse: (accel) acceleration profile 0
[     4.928] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[     4.928] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[     4.928] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[     4.928] (II) No input driver specified, ignoring this device.
[     4.928] (II) This device may have been added with another device file.
[     4.929] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[     4.929] (II) No input driver specified, ignoring this device.
[     4.929] (II) This device may have been added with another device file.
[     4.929] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[     4.929] (II) No input driver specified, ignoring this device.
[     4.929] (II) This device may have been added with another device file.
[     4.929] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[     4.929] (II) No input driver specified, ignoring this device.
[     4.929] (II) This device may have been added with another device file.
[     4.930] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[     4.930] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     4.930] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[     4.930] (**) AT Translated Set 2 keyboard: always reports core events
[     4.930] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[     4.930] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[     4.930] (--) evdev: AT Translated Set 2 keyboard: Found keys
[     4.930] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[     4.930] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[     4.930] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[     4.930] (**) Option "xkb_rules" "evdev"
[     4.930] (**) Option "xkb_model" "pc105"
[     4.930] (**) Option "xkb_layout" "fr"
dmesg
[    0.000000] Linux version 4.16.2-041602-generic (kernel@kathleen) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3.2)) #201804121130 SMP Thu Apr 12 11:32:17 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.16.2-041602-generic root=UUID=a02deb83-27fd-45d9-b182-c07f76407262 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d9921fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d9922000-0x00000000da060fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000da061000-0x00000000da070fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000da071000-0x00000000da188fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000da189000-0x00000000da6c5fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000da6c6000-0x00000000da75efff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000da75f000-0x00000000da75ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000da760000-0x00000000da7a2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000da7a3000-0x00000000dadf5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dadf6000-0x00000000daff1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000daff2000-0x00000000daffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0xda065000  ACPI 2.0=0xda065000  SMBIOS=0xf04c0  MPS=0xfd410 
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: wortmann To be filled by O.E.M./ChiefRiver, BIOS X300V TR.2 09/21/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x11f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FE0000000 write-back
[    0.000000]   2 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   3 base 0DC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0DB800000 mask FFF800000 uncachable
[    0.000000]   5 base 11F800000 mask FFF800000 uncachable
[    0.000000]   6 base 11F600000 mask FFFE00000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 4014M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 128M 	num_reg: 8  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd6f0-0x000fd6ff] mapped at [        (ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] BRK [0x61740000, 0x61740fff] PGTABLE
[    0.000000] BRK [0x61741000, 0x61741fff] PGTABLE
[    0.000000] BRK [0x61742000, 0x61742fff] PGTABLE
[    0.000000] BRK [0x61743000, 0x61743fff] PGTABLE
[    0.000000] BRK [0x61744000, 0x61744fff] PGTABLE
[    0.000000] BRK [0x61745000, 0x61745fff] PGTABLE
[    0.000000] BRK [0x61746000, 0x61746fff] PGTABLE
[    0.000000] BRK [0x61747000, 0x61747fff] PGTABLE
[    0.000000] BRK [0x61748000, 0x61748fff] PGTABLE
[    0.000000] BRK [0x61749000, 0x61749fff] PGTABLE
[    0.000000] BRK [0x6174a000, 0x6174afff] PGTABLE
[    0.000000] BRK [0x6174b000, 0x6174bfff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x320d6000-0x35062fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000DA065000 000024 (v02 WORTMA)
[    0.000000] ACPI: XSDT 0x00000000DA065088 00008C (v01 WORTMA WORTMANN 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DA06E3D8 00010C (v05 WORTMA WORTMANN 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DA0651A0 009231 (v02 WORTMA WORTMANN 00000022 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000DA187080 000040
[    0.000000] ACPI: APIC 0x00000000DA06E4E8 000072 (v03 WORTMA WORTMANN 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DA06E560 000044 (v01 WORTMA WORTMANN 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000DA06E5A8 00003C (v01 WORTMA WORTMANN 01072009 MSFT 00000097)
[    0.000000] ACPI: MSDM 0x00000000DA06E5E8 000055 (v03 WORTMA WORTMANN 01072009 AMI  00010013)
[    0.000000] ACPI: SLIC 0x00000000DA06E640 000176 (v01 WORTMA WORTMANN 01072009 AMI  00010013)
[    0.000000] ACPI: HPET 0x00000000DA06E7B8 000038 (v01 WORTMA WORTMANN 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DA06E7F0 000315 (v01 SataRe SataTabl 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000DA06EB08 0008E4 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DA06F3F0 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: ECDT 0x00000000DA06FE88 0000C1 (v01 WORTMA WORTMANN 01072009 AMI. 00000005)
[    0.000000] ACPI: DMAR 0x00000000DA06FF50 0000B8 (v01 INTEL  SNB      00000001 INTL 00000001)
[    0.000000] ACPI: BGRT 0x00000000DA070008 000038 (v00 WORTMA WORTMANN 01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x11f5d3000-0x11f5fdfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000011f5fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001fffffff]
[    0.000000]   node   0: [mem 0x0000000020200000-0x0000000040003fff]
[    0.000000]   node   0: [mem 0x0000000040005000-0x00000000d9921fff]
[    0.000000]   node   0: [mem 0x00000000da75f000-0x00000000da75ffff]
[    0.000000]   node   0: [mem 0x00000000da7a3000-0x00000000dadf5fff]
[    0.000000]   node   0: [mem 0x00000000daff2000-0x00000000daffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011f5fffff]
[    0.000000] On node 0 totalpages: 1020705
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 26 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13879 pages used for memmap
[    0.000000]   DMA32 zone: 888195 pages, LIFO batch:31
[    0.000000]   Normal zone: 2008 pages used for memmap
[    0.000000]   Normal zone: 128512 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 98 pages
[    0.000000] Reserving Intel graphics memory at [mem 0xdba00000-0xdf9fffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd9922000-0xda060fff]
[    0.000000] PM: Registered nosave memory: [mem 0xda061000-0xda070fff]
[    0.000000] PM: Registered nosave memory: [mem 0xda071000-0xda188fff]
[    0.000000] PM: Registered nosave memory: [mem 0xda189000-0xda6c5fff]
[    0.000000] PM: Registered nosave memory: [mem 0xda6c6000-0xda75efff]
[    0.000000] PM: Registered nosave memory: [mem 0xda760000-0xda7a2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdadf6000-0xdaff1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1004728
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.16.2-041602-generic root=UUID=a02deb83-27fd-45d9-b182-c07f76407262 ro quiet splash vt.handoff=7
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3680216K/4082820K available (12300K kernel code, 2478K rwdata, 4244K rodata, 2404K init, 2416K bss, 402604K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 39348 entries in 154 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180105
[    0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] DMAR: Host address width 36
[    0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[    0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[    0.000000] DMAR: RMRR base: 0x000000d9db3000 end: 0x000000d9dcffff
[    0.000000] DMAR: RMRR base: 0x000000db800000 end: 0x000000df9fffff
[    0.000000] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.000000] x2apic enabled
[    0.000000] Switched APIC routing to cluster x2apic.
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 1795.880 MHz processor
[    0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x19e2f5a71a1, max_idle_ns: 440795238425 ns
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.76 BogoMIPS (lpj=7183520)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.024000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.024000] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.024000] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.024000] CPU: Physical Processor ID: 0
[    0.024000] CPU: Processor Core ID: 0
[    0.024000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.024000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.024000] mce: CPU supports 7 MCE banks
[    0.024000] CPU0: Thermal monitoring enabled (TM1)
[    0.024000] process: using mwait in idle threads
[    0.024000] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.024000] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.024000] Spectre V2 : Mitigation: Full generic retpoline
[    0.024000] Freeing SMP alternatives memory: 36K
[    0.038111] TSC deadline timer enabled
[    0.038115] smpboot: CPU0: Intel(R) Core(TM) i5-3337U CPU @ 1.80GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.038219] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.038249] ... version:                3
[    0.038250] ... bit width:              48
[    0.038251] ... generic registers:      4
[    0.038252] ... value mask:             0000ffffffffffff
[    0.038253] ... max period:             00007fffffffffff
[    0.038254] ... fixed-purpose events:   3
[    0.038255] ... event mask:             000000070000000f
[    0.038305] Hierarchical SRCU implementation.
[    0.039515] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.039536] smp: Bringing up secondary CPUs ...
[    0.039650] x86: Booting SMP configuration:
[    0.039652] .... node  #0, CPUs:      #1 #2 #3
[    0.044069] smp: Brought up 1 node, 4 CPUs
[    0.044069] smpboot: Max logical packages: 1
[    0.044069] smpboot: Total of 4 processors activated (14367.04 BogoMIPS)
[    0.048293] devtmpfs: initialized
[    0.048293] x86/mm: Memory block size: 128MB
[    0.048596] evm: security.selinux
[    0.048597] evm: security.SMACK64
[    0.048598] evm: security.SMACK64EXEC
[    0.048598] evm: security.SMACK64TRANSMUTE
[    0.048599] evm: security.SMACK64MMAP
[    0.048600] evm: security.apparmor
[    0.048601] evm: security.ima
[    0.048601] evm: security.capability
[    0.048621] PM: Registering ACPI NVS region [mem 0xda071000-0xda188fff] (1146880 bytes)
[    0.048621] PM: Registering ACPI NVS region [mem 0xda760000-0xda7a2fff] (274432 bytes)
[    0.048621] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.048621] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.048621] pinctrl core: initialized pinctrl subsystem
[    0.048621] RTC time: 10:05:13, date: 04/15/18
[    0.048621] NET: Registered protocol family 16
[    0.048621] audit: initializing netlink subsys (disabled)
[    0.048621] audit: type=2000 audit(1523786713.048:1): state=initialized audit_enabled=0 res=1
[    0.048621] cpuidle: using governor ladder
[    0.048621] cpuidle: using governor menu
[    0.048621] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.048621] ACPI: bus type PCI registered
[    0.048621] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.048621] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.048621] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.048621] PCI: Using configuration type 1 for base access
[    0.048621] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.052016] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.052111] ACPI: Added _OSI(Module Device)
[    0.052112] ACPI: Added _OSI(Processor Device)
[    0.052113] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.052114] ACPI: Added _OSI(Processor Aggregator Device)
[    0.052119] ACPI: EC: EC started
[    0.052120] ACPI: EC: interrupt blocked
[    0.064506] ACPI: \: Used as first EC
[    0.064509] ACPI: \: GPE=0x0, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.064511] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.064740] ACPI: Executed 1 blocks of module-level executable AML code
[    0.088961] ACPI: Dynamic OEM Table Load:
[    0.088971] ACPI: SSDT 0xFFFF928059954000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.089213] ACPI: Dynamic OEM Table Load:
[    0.089213] ACPI: SSDT 0xFFFF928059A88000 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.089218] ACPI: Dynamic OEM Table Load:
[    0.089218] ACPI: SSDT 0xFFFF928059A55E00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.093224] ACPI: Interpreter enabled
[    0.093256] ACPI: (supports S0 S1 S3 S4 S5)
[    0.093257] ACPI: Using IOAPIC for interrupt routing
[    0.093302] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.093641] ACPI: Enabled 8 GPEs in block 00 to 3F
[    0.106602] ACPI: Power Resource [FN00] (off)
[    0.106745] ACPI: Power Resource [FN01] (off)
[    0.106884] ACPI: Power Resource [FN02] (off)
[    0.107023] ACPI: Power Resource [FN03] (off)
[    0.107159] ACPI: Power Resource [FN04] (off)
[    0.108339] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.108347] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.108873] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.109209] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.109211] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.110243] PCI host bridge to bus 0000:00
[    0.110247] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.110249] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.110251] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.110253] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.110255] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.110257] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.110259] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.110261] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[    0.110263] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.110274] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.110429] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.110445] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.110454] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.110460] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.110478] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.110674] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.110705] pci 0000:00:14.0: reg 0x10: [mem 0xf7d00000-0xf7d0ffff 64bit]
[    0.110792] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.110928] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.110959] pci 0000:00:16.0: reg 0x10: [mem 0xf7d1b000-0xf7d1b00f 64bit]
[    0.111047] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.111183] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.111210] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d18000-0xf7d183ff]
[    0.111310] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.111444] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.111468] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d10000-0xf7d13fff 64bit]
[    0.111551] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.111691] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.111798] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.111941] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.112050] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.112205] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.112233] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d17000-0xf7d173ff]
[    0.112333] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.112465] pci 0000:00:1f.0: [8086:1e57] type 00 class 0x060100
[    0.112712] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.112735] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.112745] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.112755] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.112764] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.112774] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.112784] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d16000-0xf7d167ff]
[    0.112836] pci 0000:00:1f.2: PME# supported from D3hot
[    0.112964] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.112990] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d15000-0xf7d150ff 64bit]
[    0.113014] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.113291] pci 0000:01:00.0: [8086:0887] type 00 class 0x028000
[    0.113382] pci 0000:01:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
[    0.113662] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.124109] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.124117] pci 0000:00:1c.0:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.124222] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.124263] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.124300] pci 0000:02:00.0: reg 0x18: [mem 0xf0004000-0xf0004fff 64bit pref]
[    0.124324] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[    0.124464] pci 0000:02:00.0: supports D1 D2
[    0.124466] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.136055] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.136060] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.136070] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.137486] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.137601] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.137715] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.137828] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.137940] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.138052] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.138165] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.138277] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.138786] ACPI: EC: interrupt unblocked
[    0.138795] ACPI: EC: event unblocked
[    0.138817] ACPI: \_SB_.PCI0.LPCB.H_EC: GPE=0x0, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.138819] ACPI: \_SB_.PCI0.LPCB.H_EC: Used as boot DSDT EC to handle transactions and events
[    0.138915] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.138915] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.138915] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.138915] vgaarb: loaded
[    0.138915] SCSI subsystem initialized
[    0.138915] libata version 3.00 loaded.
[    0.138915] ACPI: bus type USB registered
[    0.138915] usbcore: registered new interface driver usbfs
[    0.138915] usbcore: registered new interface driver hub
[    0.138915] usbcore: registered new device driver usb
[    0.138915] EDAC MC: Ver: 3.0.0
[    0.138915] Registered efivars operations
[    0.151842] PCI: Using ACPI for IRQ routing
[    0.153810] PCI: pci_cache_line_size set to 64 bytes
[    0.153920] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.153922] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.153923] e820: reserve RAM buffer [mem 0xd9922000-0xdbffffff]
[    0.153926] e820: reserve RAM buffer [mem 0xda760000-0xdbffffff]
[    0.153927] e820: reserve RAM buffer [mem 0xdadf6000-0xdbffffff]
[    0.153929] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[    0.153931] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
[    0.154055] NetLabel: Initializing
[    0.154057] NetLabel:  domain hash size = 128
[    0.154057] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.154076] NetLabel:  unlabeled traffic allowed by default
[    0.154097] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.154097] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.156020] clocksource: Switched to clocksource tsc-early
[    0.171082] VFS: Disk quotas dquot_6.6.0
[    0.171105] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.171229] AppArmor: AppArmor Filesystem Enabled
[    0.171264] pnp: PnP ACPI init
[    0.171444] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.171452] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.171586] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.171589] system 00:01: [io  0x1000-0x100f] has been reserved
[    0.171591] system 00:01: [io  0x1100-0x110f] has been reserved
[    0.171594] system 00:01: [io  0xffff] has been reserved
[    0.171596] system 00:01: [io  0x0400-0x0453] has been reserved
[    0.171599] system 00:01: [io  0x0458-0x047f] has been reserved
[    0.171601] system 00:01: [io  0x0500-0x057f] has been reserved
[    0.171605] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.171611] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.171645] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.171726] system 00:03: [io  0x0454-0x0457] has been reserved
[    0.171732] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.171948] system 00:04: [io  0x0680-0x068f] has been reserved
[    0.171951] system 00:04: [io  0x0a10-0x0a1f] has been reserved
[    0.171956] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.172052] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.172058] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.188137] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.188215] pnp 00:07: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[    0.188623] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.188626] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.188629] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.188631] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.188634] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.188636] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.188639] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.188641] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.188644] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    0.188646] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.188648] system 00:08: [mem 0xdfa00000-0xdfa00fff] has been reserved
[    0.188654] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.188961] system 00:09: [mem 0x20000000-0x201fffff] has been reserved
[    0.188963] system 00:09: [mem 0x40004000-0x40004fff] has been reserved
[    0.188969] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.188994] pnp: PnP ACPI: found 10 devices
[    0.195202] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.195236] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.195244] pci 0000:00:1c.0:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.195256] pci 0000:00:1c.2: PCI bridge to [bus 02]
[    0.195260] pci 0000:00:1c.2:   bridge window [io  0xe000-0xefff]
[    0.195270] pci 0000:00:1c.2:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.195280] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.195282] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.195285] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.195287] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.195289] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.195291] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.195294] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.195296] pci_bus 0000:00: resource 11 [mem 0xdfa00000-0xfeafffff window]
[    0.195298] pci_bus 0000:01: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.195301] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.195303] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.195466] NET: Registered protocol family 2
[    0.195721] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
[    0.195743] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.195827] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.195930] TCP: Hash tables configured (established 32768 bind 32768)
[    0.195969] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.195988] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.196067] NET: Registered protocol family 1
[    0.196084] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.244205] PCI: CLS mismatch (64 != 32), using 64 bytes
[    0.244256] Unpacking initramfs...
[    1.307078] Freeing initrd memory: 48692K
[    1.307164] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.307168] software IO TLB [mem 0xc9987000-0xcd987000] (64MB) mapped at [000000001a525f40-00000000a8f7d873]
[    1.307466] Scanning for low memory corruption every 60 seconds
[    1.308309] Initialise system trusted keyrings
[    1.308321] Key type blacklist registered
[    1.308364] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    1.310049] zbud: loaded
[    1.310729] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.310956] fuse init (API version 7.26)
[    1.312368] Key type asymmetric registered
[    1.312370] Asymmetric key parser 'x509' registered
[    1.312415] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.312456] io scheduler noop registered
[    1.312457] io scheduler deadline registered
[    1.312513] io scheduler cfq registered (default)
[    1.313160] efifb: probing for efifb
[    1.313174] efifb: framebuffer at 0xe0000000, using 4160k, total 4160k
[    1.313175] efifb: mode is 1366x768x32, linelength=5504, pages=1
[    1.313176] efifb: scrolling: redraw
[    1.313178] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.317309] Console: switching to colour frame buffer device 170x48
[    1.321213] fb0: EFI VGA frame buffer device
[    1.321226] intel_idle: MWAIT substates: 0x21120
[    1.321228] intel_idle: v0.4.1 model 0x3A
[    1.321402] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.336094] ACPI: AC Adapter [AC0] (off-line)
[    1.336186] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    1.336197] ACPI: Sleep Button [SLPB]
[    1.336238] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.336320] ACPI: Power Button [PWRB]
[    1.336390] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    1.336398] ACPI: Lid Switch [LID0]
[    1.336447] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.336557] ACPI: Power Button [PWRF]
[    1.416234] thermal LNXTHERM:00: registered as thermal_zone0
[    1.416236] ACPI: Thermal Zone [TZ00] (50 C)
[    1.464118] thermal LNXTHERM:01: registered as thermal_zone1
[    1.464120] ACPI: Thermal Zone [TZ01] (50 C)
[    1.464306] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.872158] ACPI: Battery Slot [BAT0] (battery present)
[    1.872482] Linux agpgart interface v0.103
[    1.874886] loop: module loaded
[    1.875348] libphy: Fixed MDIO Bus: probed
[    1.875350] tun: Universal TUN/TAP device driver, 1.6
[    1.875412] PPP generic driver version 2.4.2
[    1.875487] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.875491] ehci-pci: EHCI PCI platform driver
[    1.875687] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.875695] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.875711] ehci-pci 0000:00:1a.0: debug port 2
[    1.879614] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.879636] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d18000
[    1.892028] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.892084] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.892086] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.892089] usb usb1: Product: EHCI Host Controller
[    1.892091] usb usb1: Manufacturer: Linux 4.16.2-041602-generic ehci_hcd
[    1.892092] usb usb1: SerialNumber: 0000:00:1a.0
[    1.892241] hub 1-0:1.0: USB hub found
[    1.892252] hub 1-0:1.0: 2 ports detected
[    1.892614] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.892621] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.892636] ehci-pci 0000:00:1d.0: debug port 2
[    1.896551] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.896569] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d17000
[    1.912031] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.912089] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.912092] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.912094] usb usb2: Product: EHCI Host Controller
[    1.912096] usb usb2: Manufacturer: Linux 4.16.2-041602-generic ehci_hcd
[    1.912098] usb usb2: SerialNumber: 0000:00:1d.0
[    1.912241] hub 2-0:1.0: USB hub found
[    1.912250] hub 2-0:1.0: 2 ports detected
[    1.912448] ehci-platform: EHCI generic platform driver
[    1.912462] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.912466] ohci-pci: OHCI PCI platform driver
[    1.912476] ohci-platform: OHCI generic platform driver
[    1.912483] uhci_hcd: USB Universal Host Controller Interface driver
[    1.912664] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.912670] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.913736] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[    1.913742] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.913897] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.913899] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.913901] usb usb3: Product: xHCI Host Controller
[    1.913903] usb usb3: Manufacturer: Linux 4.16.2-041602-generic xhci-hcd
[    1.913905] usb usb3: SerialNumber: 0000:00:14.0
[    1.914016] hub 3-0:1.0: USB hub found
[    1.914028] hub 3-0:1.0: 4 ports detected
[    1.914580] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.914584] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.914623] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.914626] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.914627] usb usb4: Product: xHCI Host Controller
[    1.914629] usb usb4: Manufacturer: Linux 4.16.2-041602-generic xhci-hcd
[    1.914631] usb usb4: SerialNumber: 0000:00:14.0
[    1.914756] hub 4-0:1.0: USB hub found
[    1.914769] hub 4-0:1.0: 4 ports detected
[    1.915378] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    1.920661] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.920668] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.920814] mousedev: PS/2 mouse device common for all mice
[    1.921007] rtc_cmos 00:02: RTC can wake from S4
[    1.921139] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.921170] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.921180] i2c /dev entries driver
[    1.921241] device-mapper: uevent: version 1.0.3
[    1.921316] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.921324] intel_pstate: Intel P-state driver initializing
[    1.921533] ledtrig-cpu: registered to indicate activity on CPUs
[    1.921535] EFI Variables Facility v0.08 2004-May-17
[    1.933957] NET: Registered protocol family 10
[    1.937862] Segment Routing with IPv6
[    1.937884] NET: Registered protocol family 17
[    1.937922] Key type dns_resolver registered
[    1.938127] RAS: Correctable Errors collector initialized.
[    1.938156] microcode: sig=0x306a9, pf=0x10, revision=0x12
[    1.938192] microcode: Microcode Update Driver: v2.2.
[    1.938202] sched_clock: Marking stable (1938188369, 0)->(2238558989, -300370620)
[    1.938355] registered taskstats version 1
[    1.938368] Loading compiled-in X.509 certificates
[    1.940894] Loaded X.509 cert 'Build time autogenerated kernel key: efe3adf509cf2eedd1f0c70fb3a57f43c186fd56'
[    1.940912] zswap: loaded using pool lzo/zbud
[    1.944380] Key type big_key registered
[    1.944384] Key type trusted registered
[    1.946016] Key type encrypted registered
[    1.946019] AppArmor: AppArmor sha1 policy hashing enabled
[    1.946022] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.946043] evm: HMAC attrs: 0x1
[    1.946329]   Magic number: 14:685:72
[    1.946428] rtc_cmos 00:02: setting system clock to 2018-04-15 10:05:16 UTC (1523786716)
[    1.946476] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.946476] EDD information not available.
[    1.949106] Freeing unused kernel memory: 2404K
[    1.949107] Write protecting the kernel read-only data: 20480k
[    1.949660] Freeing unused kernel memory: 2008K
[    1.953500] Freeing unused kernel memory: 1900K
[    1.960332] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.960333] x86/mm: Checking user space page tables
[    1.967002] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    2.068650] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.111097] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.111108] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.111778] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0x00000000e8ff485e, 00:23:81:18:40:68, XID 0c900800 IRQ 27
[    2.111781] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    2.118105] ahci 0000:00:1f.2: version 3.0
[    2.118407] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
[    2.118412] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    2.121972] scsi host0: ahci
[    2.122258] scsi host1: ahci
[    2.128423] scsi host2: ahci
[    2.133048] scsi host3: ahci
[    2.133144] scsi host4: ahci
[    2.133225] scsi host5: ahci
[    2.133289] ata1: SATA max UDMA/133 abar m2048@0xf7d16000 port 0xf7d16100 irq 28
[    2.133291] ata2: DUMMY
[    2.133292] ata3: DUMMY
[    2.133293] ata4: DUMMY
[    2.133294] ata5: DUMMY
[    2.133295] ata6: DUMMY
[    2.134386] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    2.183171] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[    2.183172] fb: switching to inteldrmfb from EFI VGA
[    2.183199] Console: switching to colour dummy device 80x25
[    2.183303] [drm] Replacing VGA console driver
[    2.183897] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.183898] [drm] Driver supports precise vblank timestamp query.
[    2.184720] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.189505] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
[    2.190446] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.220155] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[    2.228062] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.233367] fbcon: inteldrmfb (fb0) is primary device
[    2.248027] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.248039] usb 3-3: new low-speed USB device number 2 using xhci_hcd
[    2.336039] tsc: Refined TSC clocksource calibration: 1795.919 MHz
[    2.336057] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x19e31a4ce6b, max_idle_ns: 440795217410 ns
[    2.336093] clocksource: Switched to clocksource tsc
[    2.384792] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.384793] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.385174] hub 1-1:1.0: USB hub found
[    2.385393] hub 1-1:1.0: 6 ports detected
[    2.400387] usb 3-3: New USB device found, idVendor=15ca, idProduct=00c3
[    2.400389] usb 3-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.400390] usb 3-3: Product: USB Optical Mouse
[    2.404014] hidraw: raw HID events driver (C) Jiri Kosina
[    2.404310] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.404313] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.404468] hub 2-1:1.0: USB hub found
[    2.404556] hub 2-1:1.0: 8 ports detected
[    2.408400] usbcore: registered new interface driver usbhid
[    2.408400] usbhid: USB HID core driver
[    2.409763] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:15CA:00C3.0001/input/input8
[    2.409847] hid-generic 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-3/input0
[    2.446633] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.447260] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.447262] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.447264] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.447708] ata1.00: ATA-9: TOSHIBA THNSNJ128GMCU, JUT10101, max UDMA/100
[    2.447721] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.448819] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    2.448821] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    2.448823] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    2.449454] ata1.00: configured for UDMA/100
[    2.449791] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA THNSNJ12 0101 PQ: 0 ANSI: 5
[    2.449985] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    2.449988] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.449998] sd 0:0:0:0: [sda] Write Protect is off
[    2.450000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.450018] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.451179]  sda: sda1 sda2 sda3 sda4
[    2.451444] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.672089] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    2.785215] usb 1-1.1: New USB device found, idVendor=8087, idProduct=07da
[    2.785217] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.967287] Console: switching to colour frame buffer device 170x48
[    2.986418] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.070500] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.176027] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    3.196126] systemd[1]: Detected architecture x86-64.
[    3.196363] systemd[1]: Set hostname to <joker>.
[    3.255627] systemd[1]: Created slice User and Session Slice.
[    3.255818] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    3.255893] systemd[1]: Listening on Journal Audit Socket.
[    3.255904] systemd[1]: Reached target Remote File Systems (Pre).
[    3.255912] systemd[1]: Reached target Remote File Systems.
[    3.255957] systemd[1]: Listening on Journal Socket.
[    3.256000] systemd[1]: Listening on udev Control Socket.
[    3.276854] lp: driver loaded but no devices found
[    3.280740] ppdev: user-space parallel port driver
[    3.335662] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    3.345030] systemd-journald[266]: Received request to flush runtime journal from PID 1
[    3.684462] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    3.685631] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20180105/utaddress-247)
[    3.685640] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.685643] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180105/utaddress-247)
[    3.685649] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.685650] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180105/utaddress-247)
[    3.685656] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.685657] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180105/utaddress-247)
[    3.685662] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    3.685662] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    3.704922] Bluetooth: Core ver 2.22
[    3.704941] NET: Registered protocol family 31
[    3.704942] Bluetooth: HCI device and connection manager initialized
[    3.704945] Bluetooth: HCI socket layer initialized
[    3.704948] Bluetooth: L2CAP socket layer initialized
[    3.704954] Bluetooth: SCO socket layer initialized
[    3.718966] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.721476] usbcore: registered new interface driver btusb
[    3.756982] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    3.756984] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    3.756985] RAPL PMU: hw unit of domain package 2^-16 Joules
[    3.756986] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    3.760182] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.762757] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.762761] cfg80211: failed to load regulatory.db
[    3.785569] cryptd: max_cpu_qlen set to 1000
[    3.785575] Intel(R) Wireless WiFi driver for Linux
[    3.785576] Copyright(c) 2003- 2015 Intel Corporation
[    3.785676] iwlwifi 0000:01:00.0: enabling device (0100 -> 0102)
[    3.785861] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.830339] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    3.861218] AVX version of gcm_enc/dec engaged.
[    3.861220] AES CTR mode by8 optimization enabled
[    3.890177] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    3.890180] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[    3.890182] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    3.890184] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[    3.936711] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    3.961882] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    3.962160] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.008443] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
[    4.019901] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    4.019905] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.019908] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[    4.019910] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.019911] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.019914] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x19
[    4.019916] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[    4.029685] intel_rapl: Found RAPL domain package
[    4.029687] intel_rapl: Found RAPL domain core
[    4.029688] intel_rapl: Found RAPL domain uncore
[    4.040240] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    4.040309] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    4.040364] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    4.112690] Adding 6290428k swap on /dev/sda4.  Priority:-2 extents:1 across:6290428k SSFS
[    4.252600] audit: type=1400 audit(1523786718.801:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=723 comm="apparmor_parser"
[    4.252606] audit: type=1400 audit(1523786718.801:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=723 comm="apparmor_parser"
[    4.252609] audit: type=1400 audit(1523786718.801:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=723 comm="apparmor_parser"
[    4.252612] audit: type=1400 audit(1523786718.801:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=723 comm="apparmor_parser"
[    4.253483] audit: type=1400 audit(1523786718.801:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=722 comm="apparmor_parser"
[    4.253487] audit: type=1400 audit(1523786718.801:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=722 comm="apparmor_parser"
[    4.256109] audit: type=1400 audit(1523786718.805:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=728 comm="apparmor_parser"
[    4.256954] audit: type=1400 audit(1523786718.805:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=727 comm="apparmor_parser"
[    4.256958] audit: type=1400 audit(1523786718.805:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=727 comm="apparmor_parser"
[    4.330430] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.330432] Bluetooth: BNEP filters: protocol multicast
[    4.330437] Bluetooth: BNEP socket layer initialized
[    4.512557] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[    4.526524] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0
[    4.813529] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0
[    4.876257] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[    4.880575] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    4.990185] r8169 0000:02:00.0 enp2s0: link down
[    4.990265] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    5.062269] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[    6.000624] wlp1s0: authenticate with 7a:5b:2a:2d:c6:5c
[    6.002136] wlp1s0: send auth to 7a:5b:2a:2d:c6:5c (try 1/3)
[    6.004508] wlp1s0: authenticated
[    6.004899] iwlwifi 0000:01:00.0 wlp1s0: disabling HT as WMM/QoS is not supported by the AP
[    6.004902] iwlwifi 0000:01:00.0 wlp1s0: disabling VHT as WMM/QoS is not supported by the AP
[    6.004905] wlp1s0: waiting for beacon from 7a:5b:2a:2d:c6:5c
[    6.056017] wlp1s0: associate with 7a:5b:2a:2d:c6:5c (try 1/3)
[    6.060892] wlp1s0: RX AssocResp from 7a:5b:2a:2d:c6:5c (capab=0x411 status=0 aid=2)
[    6.063260] wlp1s0: associated
[    7.777370] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[    8.202261] Bluetooth: RFCOMM TTY layer initialized
[    8.202267] Bluetooth: RFCOMM socket layer initialized
[    8.202273] Bluetooth: RFCOMM ver 1.11
[   31.553086] random: crng init done

Enfin :

sudo modprobe -r psmouse ; sudo modprobe psmouse

N'a rien fait.

Je n'ai pas tout suivi là... C'est quoi le but des opérations ? et de la dernière en particulier ?

Hors ligne

#19 Le 15/04/2018, à 12:51

Naziel

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

La première sert à vérifier que psmouse est bien le module qui gère le touchpad, cat /proc/bus/input/devices c'est pour essayer de trouver plus d'infos sur ce touchpad, cat /var/log/Xorg.0.log et dmesg servent à trouver des erreurs en rapport avec le touchpad pour pouvoir faire des recherches plus précises.

sudo modprobe -r psmouse ; sudo modprobe psmouse sert à décharger puis recharger le module psmouse qui gère le touchpad, j'ai vu passer cette solution, c'est pour cela que je l'ai proposée.

Hors ligne

#20 Le 29/04/2018, à 12:30

Joshrek

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

J'ai désinstallé Ubuntu pour essayer Debian 9.4.
Et bien le pavé tactile fonctionne avec Debian.
C'était pour le test, car j'ai finalement choisi de réinstaller Kali 2018 sur tout le disque.
Surprise, le pavé tactile fonctionne aussi.
Pourtant Ubuntu est basé comme Kali sur Debian... ce ne sont pas les mêmes noyaux ?

Hors ligne

#21 Le 29/04/2018, à 12:42

Naziel

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

Pourtant Ubuntu est basé comme Kali sur Debian... ce ne sont pas les mêmes noyaux ?

Non, il me semble que chacun l'arrange à sa sauce pour supporter tel ou tel matériel.
Du coup, j'imagine que tu vas rester sur kali ou debian?

Hors ligne

#22 Le 29/04/2018, à 14:17

Joshrek

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

Oui sur Kali, pour explorer la sécurité réseau.
Et puis j'ai déjà Ubuntu sur une autre plateforme.
Du coup je passe le sujet en résolu, même si il ne l'est pas vraiment ?

Hors ligne

#23 Le 29/04/2018, à 14:21

Naziel

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

Ok.
C'est pas résolu, effectivement, tu peux mettre contourné (en général on met résolu ou abandonné, mais je trouve pas que la situation corresponde à ces deux termes)

Dernière modification par Naziel (Le 29/04/2018, à 14:21)

Hors ligne

#24 Le 29/04/2018, à 15:48

Joshrek

Re : [contourné] Pavé tactile ne fonctionne plus (Terra Ubuntu 16.04)

Ok, va pour [contourné].
Merci pour l'aide et le temps passé !

Hors ligne