Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#26 Le 19/04/2018, à 19:13

lepetit

Re : "the system is running low card graphics" ? [non résolu]

tu as installé le microcode pour ton processeur ?

edit : c'est étonnant, 3 topics récent avec le meme bug sur du intel

https://forum.ubuntu-fr.org/viewtopic.php?id=2024893
https://forum.ubuntu-fr.org/viewtopic.php?id=2025004


demarre avec le kernel précedent

Dernière modification par lepetit (Le 19/04/2018, à 19:18)


-pc principal: amd ryzen 2600, 16 go de ram, ssd nvme samsung @ linux mint 19
-mini pc: amd 5350 mini itx fanless, 8go de ram, ssd
-mini pc 2: intel core 2 duo t7200, 1.5 go de ram, gforce 710 (pilote libre) @ linux mint xfce, kernel xanmod
-netbook samsung nc20, via nano 1.3ghz+, 2go de ram, via vx800 @ xubuntu 18.10

Hors ligne

#27 Le 19/04/2018, à 20:17

arzavapi

Re : "the system is running low card graphics" ? [non résolu]

Merci Naziel smile

Voici la réponse :

[sudo] Mot de passe de pierre : 
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Certains paquets ne peuvent être installés. Ceci peut signifier
que vous avez demandé l'impossible, ou bien, si vous utilisez
la distribution unstable, que certains paquets n'ont pas encore
été créés ou ne sont pas sortis d'Incoming.
L'information suivante devrait vous aider à résoudre la situation : 

Les paquets suivants contiennent des dépendances non satisfaites :
 xserver-xorg-video-intel : Dépend: xorg-video-abi-20
                            Dépend: xserver-xorg-core (>= 2:1.17.99.902)
E: Impossible de corriger les problèmes, des paquets défectueux sont en mode « garder en l'état ».

Que faire ?

Dernière modification par arzavapi (Le 19/04/2018, à 20:19)


Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM  6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go

Hors ligne

#28 Le 19/04/2018, à 21:11

Nuliel

Re : "the system is running low card graphics" ? [non résolu]

Oh, c'est pas normal ça.
Donne le retour de

ls /etc/apt/sources.list.d/
cat /etc/apt/sources.list
dpkg -l | grep xorg
lsb_release -a
dpkg -l | grep intel-microcode

Edit: et on pourrait peut être trouver des trucs utiles dans

cat /var/log/Xorg.0.log

Dernière modification par Nuliel (Le 19/04/2018, à 21:24)

Hors ligne

#29 Le 19/04/2018, à 21:47

arzavapi

Re : "the system is running low card graphics" ? [non résolu]

Merci Naziel

Voici la réponse

ls /etc/apt/sources.list.d/
costales-ubuntu-folder-color-xenial.list
costales-ubuntu-folder-color-xenial.list.save
google-chrome.list
google-chrome.list.save
libreoffice-ubuntu-ppa-xenial.list
libreoffice-ubuntu-ppa-xenial.list.save
mc3man-ubuntu-trusty-media-xenial.list.save
mozillateam-ubuntu-firefox-next-xenial.list
mozillateam-ubuntu-firefox-next-xenial.list.save
noobslab-ubuntu-apps-xenial.list
noobslab-ubuntu-apps-xenial.list.save
pipelight-ubuntu-stable-xenial.list
pipelight-ubuntu-stable-xenial.list.save
skype-stable.list
skype-stable.list.save
videolan-ubuntu-stable-daily-xenial.list
videolan-ubuntu-stable-daily-xenial.list.save
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ cat /etc/apt/sources.list
# deb cdrom:[Ubuntu 16.04.2 LTS _Xenial Xerus_ - Release amd64 (20170215.2)]/ xenial main restricted

# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted
# deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial main restricted

## Major bug fix updates produced after the final release of the
## distribution.
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates main restricted
# deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial-updates main restricted

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
## team. Also, please note that software in universe WILL NOT receive any
## review or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ xenial universe
# deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial universe
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates universe
# deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial-updates universe

## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu 
## team, and may not be under a free licence. Please satisfy yourself as to 
## your rights to use the software. Also, please note that software in 
## multiverse WILL NOT receive any review or updates from the Ubuntu
## security team.
deb http://fr.archive.ubuntu.com/ubuntu/ xenial multiverse
# deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial multiverse
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-updates multiverse
# deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial-updates multiverse

## N.B. software from this repository may not have been tested as
## extensively as that contained in the main release, although it includes
## newer versions of some applications which may provide useful features.
## Also, please note that software in backports WILL NOT receive any review
## or updates from the Ubuntu security team.
deb http://fr.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse
# deb-src http://fr.archive.ubuntu.com/ubuntu/ xenial-backports main restricted universe multiverse

## Uncomment the following two lines to add software from Canonical's
## 'partner' repository.
## This software is not part of Ubuntu, but is offered by Canonical and the
## respective vendors as a service to Ubuntu users.
deb http://archive.canonical.com/ubuntu xenial partner
deb-src http://archive.canonical.com/ubuntu xenial partner

deb http://security.ubuntu.com/ubuntu xenial-security main restricted
# deb-src http://security.ubuntu.com/ubuntu xenial-security main restricted
deb http://security.ubuntu.com/ubuntu xenial-security universe
# deb-src http://security.ubuntu.com/ubuntu xenial-security universe
deb http://security.ubuntu.com/ubuntu xenial-security multiverse
# deb-src http://security.ubuntu.com/ubuntu xenial-security multiverse
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ dpkg -l | grep xorg
ii  python3-xkit                                0.5.0ubuntu2                                 all          library for the manipulation of xorg.conf files (Python 3)
ii  xorg                                        1:7.7+13ubuntu3                              amd64        X.Org X Window System
ii  xorg-docs-core                              1:1.7.1-1ubuntu1                             all          Core documentation for the X.org X Window System
ii  xserver-xorg-core-hwe-16.04                 2:1.19.5-0ubuntu2~16.04.1                    amd64        Xorg X server - core server
ii  xserver-xorg-hwe-16.04                      1:7.7+16ubuntu3~16.04.1                      amd64        X.Org X server
ii  xserver-xorg-input-all-hwe-16.04            1:7.7+16ubuntu3~16.04.1                      amd64        X.Org X server -- input driver metapackage
ii  xserver-xorg-input-evdev-hwe-16.04          1:2.10.5-1ubuntu1~16.04.1                    amd64        X.Org X server -- evdev input driver
ii  xserver-xorg-input-synaptics-hwe-16.04      1.9.0-1ubuntu1~16.04.1                       amd64        Synaptics TouchPad driver for X.Org server
ii  xserver-xorg-input-wacom-hwe-16.04          1:0.34.0-0ubuntu2~16.04.1                    amd64        X.Org X server -- Wacom input driver
ii  xserver-xorg-legacy-hwe-16.04               2:1.19.5-0ubuntu2~16.04.1                    amd64        setuid root Xorg server wrapper
ii  xserver-xorg-video-all-hwe-16.04            1:7.7+16ubuntu3~16.04.1                      amd64        X.Org X server -- output driver metapackage
ii  xserver-xorg-video-amdgpu-hwe-16.04         1.4.0-1~16.04.1                              amd64        X.Org X server -- AMDGPU display driver
ii  xserver-xorg-video-ati-hwe-16.04            1:7.10.0-1~16.04.1                           amd64        X.Org X server -- AMD/ATI display driver wrapper
ii  xserver-xorg-video-fbdev-hwe-16.04          1:0.4.4-1build6~16.04.1                      amd64        X.Org X server -- fbdev display driver
ii  xserver-xorg-video-intel-hwe-16.04          2:2.99.917+git20170309-0ubuntu1~16.04.1      amd64        X.Org X server -- Intel i8xx, i9xx display driver
ii  xserver-xorg-video-nouveau-hwe-16.04        1:1.0.15-2~16.04.1                           amd64        X.Org X server -- Nouveau display driver
ii  xserver-xorg-video-qxl-hwe-16.04            0.1.5-2build1~16.04.1                        amd64        X.Org X server -- QXL display driver
ii  xserver-xorg-video-radeon-hwe-16.04         1:7.10.0-1~16.04.1                           amd64        X.Org X server -- AMD/ATI Radeon display driver
ii  xserver-xorg-video-vesa-hwe-16.04           1:2.3.4-1build3~16.04.1                      amd64        X.Org X server -- VESA display driver
ii  xserver-xorg-video-vmware-hwe-16.04         1:13.2.1-1build1~16.04.1                     amd64        X.Org X server -- VMware display driver
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ lsb_release -a
No LSB modules are available.
Distributor ID:	Ubuntu
Description:	Ubuntu 16.04.4 LTS
Release:	16.04
Codename:	xenial
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ dpkg -l | grep intel-microcode
~$ dpkg -l | grep intel-microcode
ii  intel-microcode                             3.20180312.0~ubuntu16.04.1                   amd64        Processor microcode firmware for Intel CPUs

Pouvez vous préciser la dernière commande ? Je n'ai pas compris ... sad

Dernière modification par arzavapi (Le 19/04/2018, à 22:03)


Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM  6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go

Hors ligne

#30 Le 19/04/2018, à 22:01

Nuliel

Re : "the system is running low card graphics" ? [non résolu]

Laquelle? cat /var/log/Xorg.0.log ou dpkg -l | grep intel-microcode? Un retour vide est aussi un retour pour la deuxième.

Edit: je crois que j'ai effectivement demandé l'impossible... J'arrête pour ce soir

Dernière modification par Nuliel (Le 19/04/2018, à 22:07)

Hors ligne

#31 Le 19/04/2018, à 22:22

arzavapi

Re : "the system is running low card graphics" ? [non résolu]

Désolé Naziel

Après un

sudo apt-get update

et un

sudo apt full-upgrade

j'ai eu les 2 mêmes images d'alerte "low graphic mode" que précédemment...

Je me demande bien ce qu'il faut faire et qu'est ce que tout cela veut dire sad

Dernière modification par arzavapi (Le 19/04/2018, à 22:24)


Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM  6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go

Hors ligne

#32 Le 19/04/2018, à 23:12

youssoufB

Re : "the system is running low card graphics" ? [non résolu]

on aurais besoin du fichier de log du serveur X qui se trouve:
/var/log/Xorg.0.log
pour l'afficher directement tu peu taper:

cat /var/log/Xorg.0.log

mail et moteur de recherche: Lilo

Hors ligne

#33 Le 20/04/2018, à 07:21

Nuliel

Re : "the system is running low card graphics" ? [non résolu]

Je passe juste pour préciser un truc:

Naziel a écrit :

je crois que j'ai effectivement demandé l'impossible

Faisait référence au post 27

arzavapi a écrit :

Certains paquets ne peuvent être installés. Ceci peut signifier
que vous avez demandé l'impossible, ou bien, si vous utilisez
la distribution unstable, que certains paquets n'ont pas encore
été créés ou ne sont pas sortis d'Incoming.

Donc que j'ai proposé une commande ne pouvant pas se faire

Dernière modification par Nuliel (Le 20/04/2018, à 07:21)

Hors ligne

#34 Le 20/04/2018, à 14:58

arzavapi

Re : "the system is running low card graphics" ? [non résolu]

Bonjour à tous

youssoufB : voici l'écriture correspondante demandée

cat /var/log/Xorg.0.log
[    29.041] 
X.Org X Server 1.19.5
Release Date: 2017-10-12
[    29.041] X Protocol Version 11, Revision 0
[    29.041] Build Operating System: Linux 4.4.0-101-generic x86_64 Ubuntu
[    29.041] Current Operating System: Linux pierre-CR61-2M-CX61-2OC-CX61-2OD 4.13.0-38-generic #43~16.04.1-Ubuntu SMP Wed Mar 14 17:48:43 UTC 2018 x86_64
[    29.041] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-38-generic root=UUID=c29a43e6-5257-4ca4-98e2-65ee66e0f54b ro quiet splash zswap.enabled=1 vt.handoff=7
[    29.041] Build Date: 24 November 2017  09:44:25AM
[    29.041] xorg-server 2:1.19.5-0ubuntu2~16.04.1 (For technical support please see http://www.ubuntu.com/support) 
[    29.041] Current version of pixman: 0.33.6
[    29.041] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    29.041] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    29.041] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Apr 20 15:51:58 2018
[    29.104] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    29.104] (==) No Layout section.  Using the first Screen section.
[    29.104] (==) No screen section available. Using defaults.
[    29.104] (**) |-->Screen "Default Screen Section" (0)
[    29.104] (**) |   |-->Monitor "<default monitor>"
[    29.104] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    29.104] (==) Automatically adding devices
[    29.104] (==) Automatically enabling devices
[    29.104] (==) Automatically adding GPU devices
[    29.104] (==) Automatically binding GPU devices
[    29.104] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    29.104] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    29.104] 	Entry deleted from font path.
[    29.104] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    29.104] 	Entry deleted from font path.
[    29.104] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    29.104] 	Entry deleted from font path.
[    29.104] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    29.104] 	Entry deleted from font path.
[    29.104] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    29.104] 	Entry deleted from font path.
[    29.104] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[    29.104] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    29.104] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    29.104] (II) Loader magic: 0x5599838c5e00
[    29.104] (II) Module ABI versions:
[    29.104] 	X.Org ANSI C Emulation: 0.4
[    29.104] 	X.Org Video Driver: 23.0
[    29.104] 	X.Org XInput driver : 24.1
[    29.105] 	X.Org Server Extension : 10.0
[    29.105] (++) using VT number 7

[    29.105] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    29.106] (II) xfree86: Adding drm device (/dev/dri/card0)
[    29.106] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[    29.107] (--) PCI:*(0:0:2:0) 8086:0406:1462:10e9 rev 6, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    29.107] (II) LoadModule: "glx"
[    29.186] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    29.806] (II) Module glx: vendor="X.Org Foundation"
[    29.806] 	compiled for 1.19.5, module version = 1.0.0
[    29.806] 	ABI class: X.Org Server Extension, version 10.0
[    29.806] (==) Matched modesetting as autoconfigured driver 0
[    29.806] (==) Matched fbdev as autoconfigured driver 1
[    29.806] (==) Matched vesa as autoconfigured driver 2
[    29.806] (==) Assigned the driver to the xf86ConfigLayout
[    29.806] (II) LoadModule: "modesetting"
[    29.807] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    29.807] (II) Module modesetting: vendor="X.Org Foundation"
[    29.807] 	compiled for 1.19.5, module version = 1.19.5
[    29.807] 	Module class: X.Org Video Driver
[    29.807] 	ABI class: X.Org Video Driver, version 23.0
[    29.807] (II) LoadModule: "fbdev"
[    29.807] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    29.807] (II) Module fbdev: vendor="X.Org Foundation"
[    29.807] 	compiled for 1.19.3, module version = 0.4.4
[    29.807] 	Module class: X.Org Video Driver
[    29.807] 	ABI class: X.Org Video Driver, version 23.0
[    29.807] (II) LoadModule: "vesa"
[    29.807] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    29.807] (II) Module vesa: vendor="X.Org Foundation"
[    29.807] 	compiled for 1.19.3, module version = 2.3.4
[    29.807] 	Module class: X.Org Video Driver
[    29.807] 	ABI class: X.Org Video Driver, version 23.0
[    29.807] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    29.807] (II) FBDEV: driver for framebuffer: fbdev
[    29.807] (II) VESA: driver for VESA chipsets: vesa
[    29.807] (WW) Falling back to old probe method for modesetting
[    29.807] (II) modeset(1): using default device
[    29.807] (II) Loading sub module "fbdevhw"
[    29.807] (II) LoadModule: "fbdevhw"
[    29.807] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    29.807] (II) Module fbdevhw: vendor="X.Org Foundation"
[    29.807] 	compiled for 1.19.5, module version = 0.0.2
[    29.807] 	ABI class: X.Org Video Driver, version 23.0
[    29.807] (**) FBDEV(2): claimed PCI slot 0@0:2:0
[    29.807] (II) FBDEV(2): using default device
[    29.807] (WW) Falling back to old probe method for vesa
[    29.807] (EE) Screen 0 deleted because of no matching config section.
[    29.808] (II) UnloadModule: "modesetting"
[    29.808] (EE) 
Fatal server error:
[    29.808] (EE) Cannot run in framebuffer mode. Please specify busIDs        for all framebuffer devices
[    29.808] (EE) 
[    29.808] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    29.808] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    29.808] (EE) 
[    29.813] (EE) Server terminated with error (1). Closing log file.

J'aimerais bien savoir ce que tout ça veut dire sad
Je précise que mon ordi met du temps à démarrer, et que les tableaux d'alertes (que j'ai photographié sur la page précédente) apparaissent toujours...
Merci à vous et à Naziel smile

Dernière modification par arzavapi (Le 20/04/2018, à 15:05)


Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM  6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go

Hors ligne

#35 Le 20/04/2018, à 15:40

??

Re : "the system is running low card graphics" ? [non résolu]

Bonjour.
La trace semble montrer que tu es dans ce contexte ( hormis la version)


https://wiki.archlinux.org/index.php/xorg a écrit :

Frame-buffer mode problems
If X fails to start with the following log messages,

(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
       compiled for 1.6.1, module version=0.0.2
       ABI class: X.Org Video Driver, version 5.0
(II) FBDEV(1): using default device

Fatal server error:
Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices

Uninstall the xf86-video-fbdev package.

  sudo  apt  uninstall  xf86-video-fbdev

. ???

Dernière modification par ?? (Le 20/04/2018, à 15:48)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#36 Le 20/04/2018, à 16:11

inbox

Re : "the system is running low card graphics" ? [non résolu]

Salut,

Vu que ton pc est lent à démarrer, il faudrait le retour de cette commande :

dmesg

Il faudrait aussi vérifier l'état du disque dur avec smartmontools.

A+


Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#37 Le 20/04/2018, à 19:05

Nuliel

Re : "the system is running low card graphics" ? [non résolu]

Je proposerais bien

sudo apt install --reinstall xserver-xorg-video-intel-hwe-16.04

Hors ligne

#38 Le 20/04/2018, à 19:11

moko138

Re : "the system is running low card graphics" ? [non résolu]

arzavapi a écrit :
ls /etc/apt/sources.list.d/
costales-ubuntu-folder-color-xenial.list
costales-ubuntu-folder-color-xenial.list.save
google-chrome.list
google-chrome.list.save
libreoffice-ubuntu-ppa-xenial.list
libreoffice-ubuntu-ppa-xenial.list.save
mc3man-ubuntu-trusty-media-xenial.list.save
mozillateam-ubuntu-firefox-next-xenial.list
mozillateam-ubuntu-firefox-next-xenial.list.save
noobslab-ubuntu-apps-xenial.list
noobslab-ubuntu-apps-xenial.list.save
pipelight-ubuntu-stable-xenial.list
pipelight-ubuntu-stable-xenial.list.save
skype-stable.list
skype-stable.list.save
videolan-ubuntu-stable-daily-xenial.list
videolan-ubuntu-stable-daily-xenial.list.save
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ 

Je ne connais pas tous ces ppa, mais je me pose des questions sur au moins :
costales-ubuntu-folder-color-xenial.list
videolan-ubuntu-stable-daily-xenial.list


...Et sur cette option :

(...) /boot/vmlinuz-4.13.0-38 (...) ro quiet splash zswap.enabled=1 vt.handoff=7

Depuis quand as-tu mis en place "zswap.enabled=1" ?


Merci de montrer les retours complets et SÉPARÉS de

uname -mr
sudo apt-get update

puis de :

sudo apt full-upgrade

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#39 Le 20/04/2018, à 21:12

arzavapi

Re : "the system is running low card graphics" ? [non résolu]

Bonsoir

?? : je ne comprends pas ce que vous voulez dire (que je suis "dans ce contexte")...

inbox : voici le retour de

dmesg
~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x24, date = 2018-01-21
[    0.000000] random: get_random_bytes called from start_kernel+0x42/0x50d with crng_init=0
[    0.000000] Linux version 4.13.0-38-generic (buildd@lgw01-amd64-027) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #43~16.04.1-Ubuntu SMP Wed Mar 14 17:48:43 UTC 2018 (Ubuntu 4.13.0-38.43~16.04.1-generic 4.13.16)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-38-generic root=UUID=c29a43e6-5257-4ca4-98e2-65ee66e0f54b ro quiet splash zswap.enabled=1 vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cbaa9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cbaaa000-0x00000000cbab0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cbab1000-0x00000000cc195fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cc196000-0x00000000cc3e1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cc3e2000-0x00000000db448fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db449000-0x00000000db4d2fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000db4d3000-0x00000000db5edfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000db5ee000-0x00000000dba1ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dba20000-0x00000000dbffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dbfff000-0x00000000dbffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Micro-Star International Co., Ltd. CR61 2M/CX61 2OC/CX61 2OD/MS-16GD, BIOS E16GDIMS.20I 11/10/2014
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7F00000000 write-back
[    0.000000]   1 base 0100000000 mask 7FE0000000 write-back
[    0.000000]   2 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   3 base 00DE000000 mask 7FFE000000 uncachable
[    0.000000]   4 base 00DD000000 mask 7FFF000000 uncachable
[    0.000000]   5 base 011FE00000 mask 7FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] total RAM covered: 4046M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 64M 	num_reg: 7  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdc000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd760-0x000fd76f] mapped at [ffff88ee000fd760]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff88ee00097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x6852c000, 0x6852cfff] PGTABLE
[    0.000000] BRK [0x6852d000, 0x6852dfff] PGTABLE
[    0.000000] BRK [0x6852e000, 0x6852efff] PGTABLE
[    0.000000] BRK [0x6852f000, 0x6852ffff] PGTABLE
[    0.000000] BRK [0x68530000, 0x68530fff] PGTABLE
[    0.000000] BRK [0x68531000, 0x68531fff] PGTABLE
[    0.000000] BRK [0x68532000, 0x68532fff] PGTABLE
[    0.000000] BRK [0x68533000, 0x68533fff] PGTABLE
[    0.000000] BRK [0x68534000, 0x68534fff] PGTABLE
[    0.000000] BRK [0x68535000, 0x68535fff] PGTABLE
[    0.000000] BRK [0x68536000, 0x68536fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x321b2000-0x350d0fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 MSI_NB)
[    0.000000] ACPI: XSDT 0x00000000DB9F2088 000094 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DBA011E8 00010C (v05 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DB9F21B8 00F02E (v02 MSI_NB MEGABOOK 00000014 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000DBA1E080 000040
[    0.000000] ACPI: APIC 0x00000000DBA012F8 000062 (v03 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DBA01360 000044 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: LPIT 0x00000000DBA013A8 00005C (v01 MSI_NB MEGABOOK 00000000 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DBA01408 000228 (v01 INTEL  sensrhub 00000000 INTL 20120711)
[    0.000000] ACPI: SLIC 0x00000000DBA01630 000176 (v01 MSI_NB MEGABOOK 01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DBA017A8 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DBA01CE8 000AD8 (v01 PmRef  CpuPm    00003000 INTL 20120711)
[    0.000000] ACPI: MCFG 0x00000000DBA027C0 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DBA02800 000038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DBA02838 000315 (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DBA02B50 003562 (v01 SaSsdt SaSsdt   00003000 INTL 20091112)
[    0.000000] ACPI: SSDT 0x00000000DBA060B8 001342 (v01 SgRef  SgPeg    00001000 INTL 20120711)
[    0.000000] ACPI: MSFF 0x00000000DBA07400 000029 (v01 MSI_NB MEGABOOK 00000010 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x11fdd5000-0x11fdfffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000011fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000cbaa9fff]
[    0.000000]   node   0: [mem 0x00000000cbab1000-0x00000000cc195fff]
[    0.000000]   node   0: [mem 0x00000000cc3e2000-0x00000000db448fff]
[    0.000000]   node   0: [mem 0x00000000db4d3000-0x00000000db5edfff]
[    0.000000]   node   0: [mem 0x00000000dbfff000-0x00000000dbffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000011fdfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011fdfffff]
[    0.000000] On node 0 totalpages: 1028270
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13965 pages used for memmap
[    0.000000]   DMA32 zone: 893714 pages, LIFO batch:31
[    0.000000]   Normal zone: 2040 pages used for memmap
[    0.000000]   Normal zone: 130560 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000dd200000-0x00000000df1fffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcbaaa000-0xcbab0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcc196000-0xcc3e1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb449000-0xdb4d2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdb5ee000-0xdba1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdba20000-0xdbffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdc000000-0xdcffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @ffff88ef1fa00000 s146520 r8192 d29608 u1048576
[    0.000000] pcpu-alloc: s146520 r8192 d29608 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1012180
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-38-generic root=UUID=c29a43e6-5257-4ca4-98e2-65ee66e0f54b ro quiet splash zswap.enabled=1 vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3906792K/4113080K available (12300K kernel code, 2481K rwdata, 4008K rodata, 2368K init, 2372K bss, 206288K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 37844 entries in 148 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 2394.423 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.84 BogoMIPS (lpj=9577692)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170531
[    0.016655] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.016678] Security Framework initialized
[    0.016679] Yama: becoming mindful.
[    0.016694] AppArmor: AppArmor initialized
[    0.017512] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.017951] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.017974] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.017988] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.018175] CPU: Physical Processor ID: 0
[    0.018176] CPU: Processor Core ID: 0
[    0.018181] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.018181] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.018183] FEATURE SPEC_CTRL Present
[    0.018185] mce: CPU supports 7 MCE banks
[    0.018193] CPU0: Thermal monitoring enabled (TM1)
[    0.018204] process: using mwait in idle threads
[    0.018206] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.018207] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.018209] Spectre V2 mitigation: Mitigation: Full generic retpoline
[    0.018209] Spectre V2 mitigation: Speculation control IBPB supported IBRS supported
[    0.018210] Spectre V2 mitigation: Retpoline compiled kernel.  Defaulting IBRS to disabled
[    0.018794] Freeing SMP alternatives memory: 36K
[    0.020070] smpboot: Max logical packages: 1
[    0.020476] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.062063] TSC deadline timer enabled
[    0.062065] smpboot: CPU0: Intel(R) Pentium(R) CPU 3560M @ 2.40GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.062121] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.062163] ... version:                3
[    0.062164] ... bit width:              48
[    0.062164] ... generic registers:      8
[    0.062165] ... value mask:             0000ffffffffffff
[    0.062166] ... max period:             00007fffffffffff
[    0.062166] ... fixed-purpose events:   3
[    0.062167] ... event mask:             00000007000000ff
[    0.062198] Hierarchical SRCU implementation.
[    0.062945] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.062961] smp: Bringing up secondary CPUs ...
[    0.063028] x86: Booting SMP configuration:
[    0.063029] .... node  #0, CPUs:      #1
[    0.064000] smp: Brought up 1 node, 2 CPUs
[    0.064000] smpboot: Total of 2 processors activated (9577.69 BogoMIPS)
[    0.064000] devtmpfs: initialized
[    0.064000] x86/mm: Memory block size: 128MB
[    0.064252] evm: security.selinux
[    0.064253] evm: security.SMACK64
[    0.064253] evm: security.SMACK64EXEC
[    0.064254] evm: security.SMACK64TRANSMUTE
[    0.064254] evm: security.SMACK64MMAP
[    0.064255] evm: security.ima
[    0.064255] evm: security.capability
[    0.064278] PM: Registering ACPI NVS region [mem 0xcbaaa000-0xcbab0fff] (28672 bytes)
[    0.064278] PM: Registering ACPI NVS region [mem 0xdb5ee000-0xdba1ffff] (4399104 bytes)
[    0.064278] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.064278] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.064278] pinctrl core: initialized pinctrl subsystem
[    0.064278] RTC time: 19:47:06, date: 04/20/18
[    0.064321] NET: Registered protocol family 16
[    0.064470] cpuidle: using governor ladder
[    0.064470] cpuidle: using governor menu
[    0.064470] PCCT header not found.
[    0.064470] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.064470] ACPI: bus type PCI registered
[    0.064470] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.064470] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.064470] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.064470] PCI: Using configuration type 1 for base access
[    0.064470] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.064470] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.065076] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.065076] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.065076] ACPI: Added _OSI(Module Device)
[    0.065076] ACPI: Added _OSI(Processor Device)
[    0.065076] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.065076] ACPI: Added _OSI(Processor Aggregator Device)
[    0.065076] ACPI: Executed 1 blocks of module-level executable AML code
[    0.069416] ACPI Error: No handler for Region [EC__] (ffff88ef1b14ef78) [EmbeddedControl] (20170531/evregion-166)
[    0.069422] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20170531/exfldio-299)
[    0.069427] ACPI Error: Method parse/execution failed \_SB.PCI0.LPCB.EC._REG, AE_NOT_EXIST (20170531/psparse-550)
[    0.069427] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.069521] ACPI: Dynamic OEM Table Load:
[    0.069526] ACPI: SSDT 0xFFFF88EF1A5AB000 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20120711)
[    0.069886] ACPI: Dynamic OEM Table Load:
[    0.069890] ACPI: SSDT 0xFFFF88EF1A4C2000 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.070273] ACPI: Dynamic OEM Table Load:
[    0.070276] ACPI: SSDT 0xFFFF88EF1A59AC00 000119 (v01 PmRef  ApCst    00003000 INTL 20120711)
[    0.070757] ACPI: EC: EC started
[    0.070757] ACPI: EC: interrupt blocked
[    0.072513] ACPI: \_SB_.PCI0.LPCB.EC__: Used as first EC
[    0.072515] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.072517] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions
[    0.072517] ACPI: Interpreter enabled
[    0.072547] ACPI: (supports S0 S3 S4 S5)
[    0.072548] ACPI: Using IOAPIC for interrupt routing
[    0.072573] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.072872] ACPI: Enabled 7 GPEs in block 00 to 3F
[    0.086188] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.086194] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.086678] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.086679] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.087098] PCI host bridge to bus 0000:00
[    0.087101] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.087102] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.087103] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.087105] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.087106] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.087107] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.087108] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.087110] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.087111] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.087112] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[    0.087114] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.087122] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[    0.087219] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.087255] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.087368] pci 0000:00:02.0: [8086:0406] type 00 class 0x030000
[    0.087380] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.087385] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.087390] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.087474] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.087483] pci 0000:00:03.0: reg 0x10: [mem 0xf7e14000-0xf7e17fff 64bit]
[    0.087596] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[    0.087616] pci 0000:00:14.0: reg 0x10: [mem 0xf7e00000-0xf7e0ffff 64bit]
[    0.087674] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.087748] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[    0.087770] pci 0000:00:16.0: reg 0x10: [mem 0xf7e1e000-0xf7e1e00f 64bit]
[    0.087831] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.087910] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[    0.087931] pci 0000:00:1a.0: reg 0x10: [mem 0xf7e1c000-0xf7e1c3ff]
[    0.088012] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.088090] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[    0.088110] pci 0000:00:1b.0: reg 0x10: [mem 0xf7e10000-0xf7e13fff 64bit]
[    0.088178] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.088256] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[    0.088324] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.088438] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[    0.088506] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.088616] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[    0.088683] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.088796] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[    0.088817] pci 0000:00:1d.0: reg 0x10: [mem 0xf7e1b000-0xf7e1b3ff]
[    0.088897] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.088974] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[    0.089146] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[    0.089162] pci 0000:00:1f.2: reg 0x10: [io  0xf0b0-0xf0b7]
[    0.089170] pci 0000:00:1f.2: reg 0x14: [io  0xf0a0-0xf0a3]
[    0.089177] pci 0000:00:1f.2: reg 0x18: [io  0xf090-0xf097]
[    0.089185] pci 0000:00:1f.2: reg 0x1c: [io  0xf080-0xf083]
[    0.089192] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.089199] pci 0000:00:1f.2: reg 0x24: [mem 0xf7e1a000-0xf7e1a7ff]
[    0.089234] pci 0000:00:1f.2: PME# supported from D3hot
[    0.089304] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[    0.089322] pci 0000:00:1f.3: reg 0x10: [mem 0xf7e19000-0xf7e190ff 64bit]
[    0.089342] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.089464] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.089520] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.089590] pci 0000:03:00.0: [1969:1091] type 00 class 0x020000
[    0.089625] pci 0000:03:00.0: reg 0x10: [mem 0xf7d00000-0xf7d3ffff 64bit]
[    0.089638] pci 0000:03:00.0: reg 0x18: [io  0xe000-0xe07f]
[    0.089755] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.104031] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.104035] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.104039] pci 0000:00:1c.3:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.104116] pci 0000:04:00.0: [10ec:8723] type 00 class 0x028000
[    0.104149] pci 0000:04:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.104181] pci 0000:04:00.0: reg 0x18: [mem 0xf7c00000-0xf7c03fff 64bit]
[    0.104299] pci 0000:04:00.0: supports D1 D2
[    0.104300] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.116033] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.116037] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.116040] pci 0000:00:1c.5:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.117539] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.117586] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.117633] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.117678] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.117723] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.117769] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.117813] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.117857] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
[    0.120002] ACPI: EC: interrupt unblocked
[    0.120002] ACPI: EC: event unblocked
[    0.120002] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.120002] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.120002] SCSI subsystem initialized
[    0.120018] libata version 3.00 loaded.
[    0.120027] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.120027] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.120027] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.120027] vgaarb: loaded
[    0.120030] ACPI: bus type USB registered
[    0.120044] usbcore: registered new interface driver usbfs
[    0.120050] usbcore: registered new interface driver hub
[    0.120058] usbcore: registered new device driver usb
[    0.120103] EDAC MC: Ver: 3.0.0
[    0.120178] PCI: Using ACPI for IRQ routing
[    0.121367] PCI: pci_cache_line_size set to 64 bytes
[    0.121420] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.121422] e820: reserve RAM buffer [mem 0xcbaaa000-0xcbffffff]
[    0.121423] e820: reserve RAM buffer [mem 0xcc196000-0xcfffffff]
[    0.121423] e820: reserve RAM buffer [mem 0xdb449000-0xdbffffff]
[    0.121425] e820: reserve RAM buffer [mem 0xdb5ee000-0xdbffffff]
[    0.121426] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff]
[    0.121498] NetLabel: Initializing
[    0.121499] NetLabel:  domain hash size = 128
[    0.121499] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.121514] NetLabel:  unlabeled traffic allowed by default
[    0.121527] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.121527] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.124002] clocksource: Switched to clocksource hpet
[    0.133152] VFS: Disk quotas dquot_6.6.0
[    0.133171] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.133264] AppArmor: AppArmor Filesystem Enabled
[    0.133309] pnp: PnP ACPI init
[    0.133429] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.133433] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.133597] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.133599] system 00:01: [io  0xffff] has been reserved
[    0.133601] system 00:01: [io  0xffff] has been reserved
[    0.133602] system 00:01: [io  0xffff] has been reserved
[    0.133604] system 00:01: [io  0x1c00-0x1cfe] has been reserved
[    0.133605] system 00:01: [io  0x1d00-0x1dfe] has been reserved
[    0.133607] system 00:01: [io  0x1e00-0x1efe] has been reserved
[    0.133608] system 00:01: [io  0x1f00-0x1ffe] has been reserved
[    0.133609] system 00:01: [io  0x1800-0x18fe] has been reserved
[    0.133611] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.133613] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.133636] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.133680] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.133682] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.133727] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.133728] system 00:04: [io  0x034c-0x034f] has been reserved
[    0.133731] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.134150] pnp 00:05: Plug and Play ACPI device, IDs PNP030b (active)
[    0.134185] pnp 00:06: Plug and Play ACPI device, IDs ETD0300 PNP0f13 (active)
[    0.134653] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.134654] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.134656] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.134657] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.134659] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.134660] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.134662] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.134663] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.134665] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.134666] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.134668] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[    0.134670] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.134672] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.134886] pnp: PnP ACPI: found 8 devices
[    0.141025] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.141042] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.141044] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.141046] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.141067] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff]
[    0.141074] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref]
[    0.141076] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.141079] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.141085] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.141088] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.141093] pci 0000:00:1c.0:   bridge window [mem 0xdf200000-0xdf3fffff]
[    0.141097] pci 0000:00:1c.0:   bridge window [mem 0xdf400000-0xdf5fffff 64bit pref]
[    0.141102] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.141105] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.141110] pci 0000:00:1c.3:   bridge window [mem 0xf7d00000-0xf7dfffff]
[    0.141117] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.141120] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.141124] pci 0000:00:1c.5:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.141132] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.141134] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.141135] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.141136] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.141138] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.141139] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.141140] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.141141] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.141143] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.141144] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[    0.141146] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.141147] pci_bus 0000:02: resource 1 [mem 0xdf200000-0xdf3fffff]
[    0.141148] pci_bus 0000:02: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref]
[    0.141150] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.141151] pci_bus 0000:03: resource 1 [mem 0xf7d00000-0xf7dfffff]
[    0.141152] pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
[    0.141154] pci_bus 0000:04: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.141290] NET: Registered protocol family 2
[    0.141415] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.141478] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.141570] TCP: Hash tables configured (established 32768 bind 32768)
[    0.141597] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.141614] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.141656] NET: Registered protocol family 1
[    0.141669] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.188102] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
[    0.188109] PCI: CLS 64 bytes, default 64
[    0.188145] Unpacking initramfs...
[    0.897058] Freeing initrd memory: 48252K
[    0.897075] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.897078] software IO TLB [mem 0xd7449000-0xdb449000] (64MB) mapped at [ffff88eed7449000-ffff88eedb448fff]
[    0.897217] Scanning for low memory corruption every 60 seconds
[    0.897470] audit: initializing netlink subsys (disabled)
[    0.897508] audit: type=2000 audit(1524253626.897:1): state=initialized audit_enabled=0 res=1
[    0.897815] Initialise system trusted keyrings
[    0.897824] Key type blacklist registered
[    0.897852] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    0.898861] zbud: loaded
[    0.899298] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.899418] fuse init (API version 7.26)
[    0.900601] Key type asymmetric registered
[    0.900602] Asymmetric key parser 'x509' registered
[    0.900628] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.900652] io scheduler noop registered
[    0.900653] io scheduler deadline registered
[    0.900673] io scheduler cfq registered (default)
[    0.901367] pcieport 0000:00:01.0: Signaling PME with IRQ 24
[    0.901383] pcieport 0000:00:1c.0: Signaling PME with IRQ 25
[    0.901401] pcieport 0000:00:1c.3: Signaling PME with IRQ 26
[    0.901418] pcieport 0000:00:1c.5: Signaling PME with IRQ 27
[    0.901436] pciehp 0000:00:1c.0:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    0.901502] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    0.901503] vesafb: scrolling: redraw
[    0.901504] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.901515] vesafb: framebuffer at 0xe0000000, mapped to 0xffffab8301000000, using 4160k, total 4160k
[    0.901586] Console: switching to colour frame buffer device 170x48
[    0.901602] fb0: VESA VGA frame buffer device
[    0.901612] intel_idle: MWAIT substates: 0x42120
[    0.901613] intel_idle: v0.4.1 model 0x3C
[    0.901673] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.901973] ACPI: AC Adapter [ADP1] (on-line)
[    0.902221] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/PNP0C09:00/PNP0C0D:00/input/input0
[    0.902633] ACPI: Lid Switch [LID0]
[    0.902710] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.902718] ACPI: Power Button [PWRB]
[    0.902745] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.902753] ACPI: Sleep Button [SLPB]
[    0.902778] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.902860] ACPI: Power Button [PWRF]
[    0.903683] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.903913] thermal LNXTHERM:00: registered as thermal_zone0
[    0.903914] ACPI: Thermal Zone [THRM] (36 C)
[    0.903994] GHES: HEST is not enabled!
[    0.904123] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.905520] Linux agpgart interface v0.103
[    0.906613] loop: module loaded
[    0.906767] libphy: Fixed MDIO Bus: probed
[    0.906768] tun: Universal TUN/TAP device driver, 1.6
[    0.906811] PPP generic driver version 2.4.2
[    0.906844] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.906846] ehci-pci: EHCI PCI platform driver
[    0.906990] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.906995] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.907008] ehci-pci 0000:00:1a.0: debug port 2
[    0.910912] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.910924] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7e1c000
[    0.928066] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.928116] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.928117] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.928119] usb usb1: Product: EHCI Host Controller
[    0.928120] usb usb1: Manufacturer: Linux 4.13.0-38-generic ehci_hcd
[    0.928121] usb usb1: SerialNumber: 0000:00:1a.0
[    0.928315] hub 1-0:1.0: USB hub found
[    0.928320] hub 1-0:1.0: 2 ports detected
[    0.928547] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.928551] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.928562] ehci-pci 0000:00:1d.0: debug port 2
[    0.932458] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.932470] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7e1b000
[    0.948071] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.948125] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.948127] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.948129] usb usb2: Product: EHCI Host Controller
[    0.948130] usb usb2: Manufacturer: Linux 4.13.0-38-generic ehci_hcd
[    0.948131] usb usb2: SerialNumber: 0000:00:1d.0
[    0.948327] hub 2-0:1.0: USB hub found
[    0.948332] hub 2-0:1.0: 2 ports detected
[    0.948450] ehci-platform: EHCI generic platform driver
[    0.948463] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.948466] ohci-pci: OHCI PCI platform driver
[    0.948474] ohci-platform: OHCI generic platform driver
[    0.948479] uhci_hcd: USB Universal Host Controller Interface driver
[    0.948608] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.948612] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.949692] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.949696] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.949774] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.949775] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.949776] usb usb3: Product: xHCI Host Controller
[    0.949778] usb usb3: Manufacturer: Linux 4.13.0-38-generic xhci-hcd
[    0.949779] usb usb3: SerialNumber: 0000:00:14.0
[    0.949948] hub 3-0:1.0: USB hub found
[    0.949964] hub 3-0:1.0: 14 ports detected
[    0.951903] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.951907] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.951939] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.951940] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.951942] usb usb4: Product: xHCI Host Controller
[    0.951943] usb usb4: Manufacturer: Linux 4.13.0-38-generic xhci-hcd
[    0.951944] usb usb4: SerialNumber: 0000:00:14.0
[    0.952092] hub 4-0:1.0: USB hub found
[    0.952102] hub 4-0:1.0: 4 ports detected
[    0.952456] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.972310] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.972314] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.972574] mousedev: PS/2 mouse device common for all mice
[    0.973358] rtc_cmos 00:02: RTC can wake from S4
[    0.973490] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.973514] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.973519] i2c /dev entries driver
[    0.973560] device-mapper: uevent: version 1.0.3
[    0.973611] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    0.973615] intel_pstate: Intel P-state driver initializing
[    0.973678] ledtrig-cpu: registered to indicate activity on CPUs
[    0.974017] NET: Registered protocol family 10
[    0.977650] Segment Routing with IPv6
[    0.977669] NET: Registered protocol family 17
[    0.977678] Key type dns_resolver registered
[    0.977827] RAS: Correctable Errors collector initialized.
[    0.977853] microcode: sig=0x306c3, pf=0x10, revision=0x24
[    0.977890] microcode: Microcode Update Driver: v2.2.
[    0.977939] sched_clock: Marking stable (977886656, 0)->(974523089, 3363567)
[    0.978116] registered taskstats version 1
[    0.978123] Loading compiled-in X.509 certificates
[    0.980453] Loaded X.509 cert 'Build time autogenerated kernel key: 7e2286d9a4c044101e0c6ffeb6c3945a9a549eb6'
[    0.980471] zswap: loaded using pool lzo/zbud
[    0.983743] Key type big_key registered
[    0.983747] Key type trusted registered
[    0.985325] Key type encrypted registered
[    0.985328] AppArmor: AppArmor sha1 policy hashing enabled
[    0.985330] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.985347] evm: HMAC attrs: 0x1
[    0.985729]   Magic number: 14:741:799
[    0.985762] platform PNP0C09:00: hash matches
[    0.985790] ec PNP0C09:00: hash matches
[    0.985901] rtc_cmos 00:02: setting system clock to 2018-04-20 19:47:07 UTC (1524253627)
[    0.985949] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.985949] EDD information not available.
[    0.985993] PM: Hibernation image not present or could not be loaded.
[    0.992879] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    1.012137] ACPI: Battery Slot [BAT1] (battery present)
[    1.014050] Freeing unused kernel memory: 2368K
[    1.014052] Write protecting the kernel read-only data: 18432k
[    1.014520] Freeing unused kernel memory: 2024K
[    1.014725] Freeing unused kernel memory: 88K
[    1.016527] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.016527] x86/mm: Checking user space page tables
[    1.018205] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.077620] hidraw: raw HID events driver (C) Jiri Kosina
[    1.082623] sdhci: Secure Digital Host Controller Interface driver
[    1.082623] sdhci: Copyright(c) Pierre Ossman
[    1.139503] ahci 0000:00:1f.2: version 3.0
[    1.140378] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x11 impl SATA mode
[    1.140381] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    1.149969] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [d8:cb:8a:82:e9:d9]
[    1.157881] scsi host0: ahci
[    1.158148] scsi host1: ahci
[    1.158224] scsi host2: ahci
[    1.158285] scsi host3: ahci
[    1.158340] scsi host4: ahci
[    1.158373] ata1: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a100 irq 29
[    1.158374] ata2: DUMMY
[    1.158375] ata3: DUMMY
[    1.158375] ata4: DUMMY
[    1.158377] ata5: SATA max UDMA/133 abar m2048@0xf7e1a000 port 0xf7e1a300 irq 29
[    1.160277] alx 0000:03:00.0 enp3s0: renamed from eth0
[    1.187517] [drm] Memory usable by graphics device = 2048M
[    1.187519] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[    1.187520] fb: switching to inteldrmfb from VESA VGA
[    1.187541] Console: switching to colour dummy device 80x25
[    1.187612] [drm] Replacing VGA console driver
[    1.193954] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.193955] [drm] Driver supports precise vblank timestamp query.
[    1.196653] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.205415] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[    1.206677] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.207148] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7
[    1.241457] fbcon: inteldrmfb (fb0) is primary device
[    1.241510] Console: switching to colour frame buffer device 170x48
[    1.241528] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.260083] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.276087] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.276103] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[    1.408829] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    1.408832] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.409143] hub 1-1:1.0: USB hub found
[    1.409236] hub 1-1:1.0: 6 ports detected
[    1.424382] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.424385] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.424640] hub 2-1:1.0: USB hub found
[    1.424728] hub 2-1:1.0: 8 ports detected
[    1.471317] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.471336] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.471899] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
[    1.471907] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170531/psparse-550)
[    1.472098] ata5.00: ATA-9: WDC WD5000LPVX-22V0TT0, 01.01A01, max UDMA/133
[    1.472100] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.472628] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20170531/psargs-364)
[    1.472633] ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170531/psparse-550)
[    1.472820] ata5.00: configured for UDMA/133
[    1.474948] ata1.00: ATAPI: TSSTcorp CDDVDW SN-208FB, TM00, max UDMA/100
[    1.482138] ata1.00: configured for UDMA/100
[    1.490736] scsi 0:0:0:0: CD-ROM            TSSTcorp CDDVDW SN-208FB  TM00 PQ: 0 ANSI: 5
[    1.523913] sr 0:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.523915] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.524060] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.524119] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.524254] scsi 4:0:0:0: Direct-Access     ATA      WDC WD5000LPVX-2 1A01 PQ: 0 ANSI: 5
[    1.556239] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    1.556327] sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.556329] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    1.556337] sd 4:0:0:0: [sda] Write Protect is off
[    1.556339] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.556354] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.622338]  sda: sda1 sda2 < sda5 >
[    1.622921] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.674903] usb 3-3: New USB device found, idVendor=0bda, idProduct=0138
[    1.674905] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.674906] usb 3-3: Product: USB2.0-CRW
[    1.674908] usb 3-3: Manufacturer: Generic
[    1.674909] usb 3-3: SerialNumber: 20090516388200000
[    1.683245] usbcore: registered new interface driver usb-storage
[    1.684496] usbcore: registered new interface driver uas
[    1.685646] ums-realtek 3-3:1.0: USB Mass Storage device detected
[    1.800095] usb 3-5: new high-speed USB device number 3 using xhci_hcd
[    1.916096] tsc: Refined TSC clocksource calibration: 2394.457 MHz
[    1.916102] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2283c360c9e, max_idle_ns: 440795302742 ns
[    1.952272] scsi host5: usb-storage 3-3:1.0
[    1.952350] usbcore: registered new interface driver ums-realtek
[    1.980702] usb 3-5: New USB device found, idVendor=5986, idProduct=014c
[    1.980704] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.980706] usb 3-5: Product: BisonCam, NB Pro
[    1.980708] usb 3-5: Manufacturer: Bison
[    2.104099] usb 3-7: new full-speed USB device number 4 using xhci_hcd
[    2.170361] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x550f00)
[    2.193796] psmouse serio1: elantech: Synaptics capabilities query result 0x79, 0x15, 0x0c.
[    2.216434] psmouse serio1: elantech: Elan sample query result 00, 5a, 96
[    2.245411] usb 3-7: New USB device found, idVendor=13d3, idProduct=3394
[    2.245413] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.245415] usb 3-7: Product: RT Bluetooth Radio
[    2.245416] usb 3-7: Manufacturer: Realtek
[    2.245417] usb 3-7: SerialNumber: 00e04c000001
[    2.246919] usb 3-3: USB disconnect, device number 2
[    2.326865] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
[    2.940227] clocksource: Switched to clocksource tsc
[    7.355806] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    8.738077] random: crng init done
[    8.865651] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    8.884120] systemd[1]: Detected architecture x86-64.
[    8.908139] systemd[1]: Set hostname to <pierre-CR61-2M-CX61-2OC-CX61-2OD>.
[   11.024185] systemd[1]: Reached target Encrypted Volumes.
[   11.024282] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[   11.024354] systemd[1]: Listening on Journal Audit Socket.
[   11.024380] systemd[1]: Listening on fsck to fsckd communication Socket.
[   11.024464] systemd[1]: Created slice User and Session Slice.
[   11.024472] systemd[1]: Reached target User and Group Name Lookups.
[   11.024494] systemd[1]: Listening on udev Kernel Socket.
[   13.065679] lp: driver loaded but no devices found
[   13.207273] ppdev: user-space parallel port driver
[   20.357865] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   20.437427] systemd-journald[246]: Received request to flush runtime journal from PID 1
[   20.752969] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   20.754409] EDAC ie31200: No ECC support
[   20.806940] Bluetooth: Core ver 2.22
[   20.806953] NET: Registered protocol family 31
[   20.806954] Bluetooth: HCI device and connection manager initialized
[   20.806956] Bluetooth: HCI socket layer initialized
[   20.806958] Bluetooth: L2CAP socket layer initialized
[   20.806962] Bluetooth: SCO socket layer initialized
[   20.827256] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   20.829593] usbcore: registered new interface driver btusb
[   20.831077] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=1200
[   20.831079] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723a_fw.bin
[   20.840670] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   20.840672] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   20.840674] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   20.840675] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   20.840676] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   20.840678] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x19
[   20.840680] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x18
[   20.848305] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[   20.848352] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[   20.851514] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170531/utaddress-247)
[   20.851520] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   20.851523] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170531/utaddress-247)
[   20.851527] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170531/utaddress-247)
[   20.851530] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   20.851531] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170531/utaddress-247)
[   20.851534] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170531/utaddress-247)
[   20.851537] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170531/utaddress-247)
[   20.851539] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   20.851540] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170531/utaddress-247)
[   20.851543] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170531/utaddress-247)
[   20.851546] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C5F (\_SB.PCI0.PEG0.PEGP.GPR) (20170531/utaddress-247)
[   20.851548] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   20.851549] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   20.893012] rtl8723ae: Using firmware rtlwifi/rtl8723fw_B.bin
[   20.895358] input: MSI WMI hotkeys as /devices/virtual/input/input10
[   20.898481] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   20.898689] rtlwifi: rtlwifi: wireless switch is on
[   20.987530] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[   20.987532] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   20.987532] RAPL PMU: hw unit of domain package 2^-14 Joules
[   20.987533] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   20.987534] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   21.033507] intel_rapl: Found RAPL domain package
[   21.033509] intel_rapl: Found RAPL domain core
[   21.033510] intel_rapl: Found RAPL domain uncore
[   21.033511] intel_rapl: Found RAPL domain dram
[   21.033513] intel_rapl: RAPL package 0 domain package locked by BIOS
[   21.033517] intel_rapl: RAPL package 0 domain dram locked by BIOS
[   21.144190] audit: type=1400 audit(1524253647.658:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=540 comm="apparmor_parser"
[   21.144192] audit: type=1400 audit(1524253647.658:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=540 comm="apparmor_parser"
[   21.144194] audit: type=1400 audit(1524253647.658:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=540 comm="apparmor_parser"
[   21.144196] audit: type=1400 audit(1524253647.658:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=540 comm="apparmor_parser"
[   21.144684] audit: type=1400 audit(1524253647.658:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=539 comm="apparmor_parser"
[   21.144686] audit: type=1400 audit(1524253647.658:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=539 comm="apparmor_parser"
[   21.155130] audit: type=1400 audit(1524253647.669:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=541 comm="apparmor_parser"
[   21.155133] audit: type=1400 audit(1524253647.669:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=541 comm="apparmor_parser"
[   21.155135] audit: type=1400 audit(1524253647.669:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=541 comm="apparmor_parser"
[   21.155137] audit: type=1400 audit(1524253647.669:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper" pid=541 comm="apparmor_parser"
[   21.221291] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[   21.221335] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[   21.221374] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[   21.221411] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[   21.221454] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[   21.298756] media: Linux media interface: v0.10
[   21.304361] Linux video capture interface: v2.00
[   21.312783] uvcvideo: Found UVC 1.00 device BisonCam, NB Pro (5986:014c)
[   21.317647] uvcvideo 3-5:1.0: Entity type for entity Processing 2 was not initialized!
[   21.317649] uvcvideo 3-5:1.0: Entity type for entity Extension 6 was not initialized!
[   21.317651] uvcvideo 3-5:1.0: Entity type for entity Camera 1 was not initialized!
[   21.317715] input: BisonCam, NB Pro: BisonCam, NB  as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/input/input16
[   21.317767] usbcore: registered new interface driver uvcvideo
[   21.317768] USB Video Class driver (1.1.1)
[   22.018914] rtl8723ae 0000:04:00.0 wlp4s0: renamed from wlan0
[   23.924073] Adding 4111356k swap on /dev/sda5.  Priority:-1 extents:1 across:4111356k FS
[   24.251871] zram: Added device: zram0
[   24.252415] zram: Added device: zram1
[   24.377367] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   24.377369] Bluetooth: BNEP filters: protocol multicast
[   24.377372] Bluetooth: BNEP socket layer initialized
[   24.850003] zram0: detected capacity change from 0 to 1013649408
[   24.853400] Adding 989888k swap on /dev/zram0.  Priority:5 extents:1 across:989888k SSFS
[   24.854118] zram1: detected capacity change from 0 to 1013649408
[   24.857529] Adding 989888k swap on /dev/zram1.  Priority:5 extents:1 across:989888k SSFS
[   30.037213] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   30.460371] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   30.473553] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   30.477657] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   30.853874] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[   62.754113] Bluetooth: RFCOMM TTY layer initialized
[   62.754118] Bluetooth: RFCOMM socket layer initialized
[   62.754122] Bluetooth: RFCOMM ver 1.11
[   98.430902] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready
[  100.941967] wlp4s0: authenticate with 26:b7:bb:70:e1:d8
[  100.976098] wlp4s0: send auth to 26:b7:bb:70:e1:d8 (try 1/3)
[  100.978513] wlp4s0: authenticated
[  100.980100] wlp4s0: associate with 26:b7:bb:70:e1:d8 (try 1/3)
[  100.989291] wlp4s0: RX AssocResp from 26:b7:bb:70:e1:d8 (capab=0x411 status=0 aid=2)
[  100.989535] wlp4s0: associated
[  100.989565] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ 

moko138 : j'ai mis

 "zswap.enabled=1"

il y a pas mal de temps -on va dire depuis novembre, enfin je crois...

~$ uname -mr
4.13.0-38-generic x86_64
udo apt-get update
[sudo] Mot de passe de pierre : 
Ign:1 http://dl.google.com/linux/chrome/deb stable InRelease
Réception de:2 http://security.ubuntu.com/ubuntu xenial-security InRelease [102 kB]
Atteint:3 http://ppa.launchpad.net/costales/folder-color/ubuntu xenial InRelease
Atteint:4 http://archive.canonical.com/ubuntu xenial InRelease                 
Atteint:5 http://dl.google.com/linux/chrome/deb stable Release                 
Atteint:6 http://ppa.launchpad.net/libreoffice/ppa/ubuntu xenial InRelease     
Atteint:7 http://ppa.launchpad.net/mozillateam/firefox-next/ubuntu xenial InRelease
Atteint:9 http://ppa.launchpad.net/noobslab/apps/ubuntu xenial InRelease       
Atteint:10 https://repo.skype.com/deb stable InRelease                         
Atteint:11 http://ppa.launchpad.net/pipelight/stable/ubuntu xenial InRelease   
Atteint:12 http://ppa.launchpad.net/videolan/stable-daily/ubuntu xenial InRelease
Réception de:13 http://security.ubuntu.com/ubuntu xenial-security/main amd64 DEP-11 Metadata [67,5 kB]
Réception de:14 http://security.ubuntu.com/ubuntu xenial-security/main DEP-11 64x64 Icons [72,9 kB]
Réception de:15 http://security.ubuntu.com/ubuntu xenial-security/universe amd64 DEP-11 Metadata [107 kB]
Réception de:16 http://security.ubuntu.com/ubuntu xenial-security/universe DEP-11 64x64 Icons [147 kB]
Atteint:17 http://fr.archive.ubuntu.com/ubuntu xenial InRelease      
Réception de:18 http://fr.archive.ubuntu.com/ubuntu xenial-updates InRelease [102 kB]
Réception de:19 http://fr.archive.ubuntu.com/ubuntu xenial-backports InRelease [102 kB]
Réception de:20 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main amd64 DEP-11 Metadata [319 kB]
Réception de:21 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main DEP-11 64x64 Icons [228 kB]
Réception de:22 http://fr.archive.ubuntu.com/ubuntu xenial-updates/universe amd64 DEP-11 Metadata [242 kB]
Réception de:23 http://fr.archive.ubuntu.com/ubuntu xenial-updates/universe DEP-11 64x64 Icons [322 kB]
Réception de:24 http://fr.archive.ubuntu.com/ubuntu xenial-updates/multiverse amd64 DEP-11 Metadata [5 972 B]
Réception de:25 http://fr.archive.ubuntu.com/ubuntu xenial-backports/main amd64 DEP-11 Metadata [3 328 B]
Réception de:26 http://fr.archive.ubuntu.com/ubuntu xenial-backports/universe amd64 DEP-11 Metadata [5 088 B]
1 826 ko réceptionnés en 12s (142 ko/s)                                        
Lecture des listes de paquets... Fait
~$ sudo apt full-upgrade
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
Calcul de la mise à jour... Fait
0 mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour.

Naziel : j'ai passé l'écriture

sudo apt install --reinstall xserver-xorg-video-intel-hwe-16.04

et j'ai redémarré mon ordi après l'avoir complètement éteint. Au redémarrage j'ai vu les 2 mêmes tableaux d'alertes... sad

Dernière modification par arzavapi (Le 20/04/2018, à 21:24)


Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM  6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go

Hors ligne

#40 Le 21/04/2018, à 08:55

??

Re : "the system is running low card graphics" ? [non résolu]

arzavapi a écrit :

Bonjour à tous

youssoufB : voici l'écriture correspondante demandée

cat /var/log/Xorg.0.log
.........
[    29.807] (WW) Falling back to old probe method for modesetting
[    29.807] (II) modeset(1): using default device
[    29.807] (II) Loading sub module "fbdevhw"
[    29.807] (II) LoadModule: "fbdevhw"
[    29.807] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    29.807] (II) Module fbdevhw: vendor="X.Org Foundation"
[    29.807] 	compiled for 1.19.5, module version = 0.0.2
[    29.807] 	ABI class: X.Org Video Driver, version 23.0
[    29.807] (**) FBDEV(2): claimed PCI slot 0@0:2:0
[    29.807] (II) FBDEV(2): using default device
[    29.807] (WW) Falling back to old probe method for vesa
[    29.807] (EE) Screen 0 deleted because of no matching config section.
[    29.808] (II) UnloadModule: "modesetting"
[    29.808] (EE) 
Fatal server error:
[    29.808] (EE) Cannot run in framebuffer mode. Please specify busIDs        for all framebuffer devices
[    29.808] (EE) 
[    29.808] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    29.808] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    29.808] (EE) 
[    29.813] (EE) Server terminated with error (1). Closing log file.

J'aimerais bien savoir ce que tout ça veut dire

Bonjour.
Il m'avait semblé que la fin de la trace que tu avais postée était assez ressemblante

Dernière modification par ?? (Le 21/04/2018, à 08:56)


Utiliser REFIND au lieu du GRUB https://doc.ubuntu-fr.org/refind . Aidez à vous faire dépanner en suivant le guide et en utilisant les outils de diagnostic J'ai perdu ma gomme. Désolé pour les fautes d'orthographes non corrigées.

Hors ligne

#41 Le 21/04/2018, à 10:01

inbox

Re : "the system is running low card graphics" ? [non résolu]

Il n'y a pas de problème apparent dans les résultat du "dmesg".

Pourrais-tu indiquer le contenu de ton sources.list avec cette commande ?

cat /etc/apt/sources.list

Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#42 Le 21/04/2018, à 10:02

Nuliel

Re : "the system is running low card graphics" ? [non résolu]

@inbox: le retour de cette commande est dans le post 29

Hors ligne

#43 Le 21/04/2018, à 10:11

inbox

Re : "the system is running low card graphics" ? [non résolu]

Merci Naziel, je ne l'avais pas vu en relisant le sujet.

Il faudrait alors le résultat de :

apt-cache policy xserver-xorg-video-intel
cat /etc/X11/xorg.conf

[Edit] Et tu n'as pas répondu au message 35 de ??

Dernière modification par inbox (Le 21/04/2018, à 10:28)


Un problème résolu ? Indiquez le en modifiant le titre du sujet.

Hors ligne

#44 Le 21/04/2018, à 13:46

moko138

Re : "the system is running low card graphics" ? [non résolu]

1) Montre

dpkg -l | grep -E "nvidia|prime|bumblebee|radeon"

  - -

arzavapi a écrit :
(EE) Screen 0 deleted because of no matching config section.

Montre

xrandr

= =


2) Tu utilises le paquet zram et la fonction zswap.
Or plusieurs pages affirment que c'est soit l'un soit l'autre. Ex :
https://askubuntu.com/questions/471912/ … -which-one dit :

ZRAM if you have no swap device on HDD/SSD.
ZSWAP if you do have a swap device on HDD/SSD.

Montre :

top | head -5 | tail -2
cat /etc/fstab | grep swap

%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#45 Le 21/04/2018, à 23:27

arzavapi

Re : "the system is running low card graphics" ? [non résolu]

Bonjour !!!

Merci pour vos réponses smile

inbox : voici les réponses aux commandes

apt-cache policy xserver-xorg-video-intel
xserver-xorg-video-intel:
  Installé : (aucun)
  Candidat : 2:2.99.917+git20160325-1ubuntu1.2
 Table de version :
     2:2.99.917+git20160325-1ubuntu1.2 500
        500 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages
     2:2.99.917+git20160325-1ubuntu1 500
        500 http://fr.archive.ubuntu.com/ubuntu xenial/main amd64 Packages
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ 
~$ cat /etc/X11/xorg.conf cat: /etc/X11/xorg.conf: Aucun fichier ou dossier de ce type

--------------------------------------------------------------
moko138

~$ apt-cache policy xserver-xorg-video-intel
xserver-xorg-video-intel:
  Installé : (aucun)
  Candidat : 2:2.99.917+git20160325-1ubuntu1.2
 Table de version :
     2:2.99.917+git20160325-1ubuntu1.2 500
        500 http://fr.archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages
     2:2.99.917+git20160325-1ubuntu1 500
        500 http://fr.archive.ubuntu.com/ubuntu xenial/main amd64 Packages
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: Aucun fichier ou dossier de ce type
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: Aucun fichier ou dossier de ce type
pierre@pierre-CR61-2M-CX61-2OC-CX61-2OD:~$ dpkg -l | grep -E "nvidia|prime|bumblebee|radeon"
ii  libdrm-radeon1:amd64                        2.4.83-1~16.04.1                             amd64        Userspace interface to radeon-specific kernel DRM services -- runtime
ii  libdrm-radeon1:i386                         2.4.83-1~16.04.1                             i386         Userspace interface to radeon-specific kernel DRM services -- runtime
ii  xserver-xorg-video-radeon-hwe-16.04         1:7.10.0-1~16.04.1                           amd64        X.Org X server -- AMD/ATI Radeon display driver

pour

xranrd
~$ xrandr
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192
eDP-1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm
   1366x768      60.00*+
   1360x768      59.80    59.96  
   1024x768      60.04    60.00  
   960x720       60.00  
   928x696       60.05  
   896x672       60.01  
   960x600       60.00  
   960x540       59.99  
   800x600       60.00    60.32    56.25  
   840x525       60.01    59.88  
   800x512       60.17  
   700x525       59.98  
   640x512       60.02  
   720x450       59.89  
   640x480       60.00    59.94  
   680x384       59.80    59.96  
   576x432       60.06  
   512x384       60.00  
   400x300       60.32    56.34  
   320x240       60.05  
VGA-1 disconnected (normal left inverted right x axis y axis)
HDMI-1 disconnected (normal left inverted right x axis y axis)
~$ top | head -5 | tail -2
KiB Mem :  3959560 total,  1916696 libr,  1062788 util,   980076 tamp/cache
KiB Éch:  6091132 total,  6091132 libr,        0 util.  2435308 dispo Mem 
~$ cat /etc/fstab | grep swap
# swap was on /dev/sda5 during installation
UUID=023a6194-85a2-4a23-962e-22dedf2922a0 none            swap    sw 0	0

Réponse au "35" de ??

sudo  apt  uninstall  xf86-video-fbdev
[sudo] Mot de passe de pierre : 
E: L'opération uninstall n'est pas valable

Donc j'ai fait :

sudo apt-get remove xf86-video-fbdev
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances       
Lecture des informations d'état... Fait
E: Impossible de trouver le paquet xf86-video-fbdev

Pour le swap et zram comment faut-il que je fasse pour supprimer tout ça : supprimer le swap ou zram ? Et comment faire ?

Voilà Merci à Tous !!!! J'espère que nous trouverons la solution. Je démarre toujours mon ordi avec ces 2 alertes qui apparaissent sad

Dernière modification par arzavapi (Le 21/04/2018, à 23:31)


Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM  6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go

Hors ligne

#46 Le 22/04/2018, à 06:39

moko138

Re : "the system is running low card graphics" ? [non résolu]

arzavapi,   tu as
4 Gio de RAM
une partition swap de 6 Gio
  et tu utilises zswap.

Donc pour moi tu dois désinstaller zram et mettre à jour les initramfs.
Montre déjà :

dpkg -l | grep zram

Sinon, qui coordonne ?   ??, Naziel ? Quelqu'un d'autre ?
sudo apt-get remove --purge zram && sudo update-initramfs -u -k all && sudo update-grub


%NOINDEX%
Un utilitaire précieux : ncdu
Photo, mini-tutoriel :  À la découverte de dcraw

Hors ligne

#47 Le 22/04/2018, à 09:23

arzavapi

Re : "the system is running low card graphics" ? [non résolu]

Bonjour moko138


~$ dpkg -l | gep zram
La commande « gep » est introuvable, vouliez-vous dire :
 La commande « gip » du paquet « gip » (universe)
 La commande « gp » du paquet « pari-gp » (universe)
 La commande « gen » du paquet « multimon » (universe)
 La commande « ge » du paquet « pvm-examples » (universe)
 La commande « iep » du paquet « emboss » (universe)
 La commande « grep » du paquet « grep » (main)
 La commande « xep » du paquet « pvm-examples » (universe)
 La commande « rep » du paquet « rep » (universe)
 La commande « gem » du paquet « ruby » (main)
 La commande « gap » du paquet « gap-core » (universe)
 La commande « gbp » du paquet « git-buildpackage » (universe)
 La commande « gcp » du paquet « gcp » (universe)
 La commande « geo » du paquet « rheolef » (universe)
 La commande « gpp » du paquet « gpp » (universe)
 La commande « gyp » du paquet « gyp » (universe)
gep : commande introuvable

Je vais utiliser cette commande que j'ai trouvé sur le forum :

sudo zramctl --reset /dev/zram1

C'est vraiment pas de chance :

zramctl: /dev/zram1: failed to reset: Périphérique ou ressource occupé
~$ sudo swapoff /dev/zram1
swapoff: /dev/zram1 : échec de swapoff: Argument invalide

sad

Dernière modification par arzavapi (Le 22/04/2018, à 09:28)


Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM  6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go

Hors ligne

#48 Le 22/04/2018, à 09:37

xubu1957

Re : "the system is running low card graphics" ? [non résolu]

Bonjour,

Repasse la bonne commande, avec le R dans grep :

dpkg -l | grep zram

Conseils pour les nouveaux demandeurs et pas qu'eux
Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.                   Membre de Linux-Azur

En ligne

#49 Le 22/04/2018, à 09:47

arzavapi

Re : "the system is running low card graphics" ? [non résolu]

Voilà c'est fait

dpkg -l | grep zram
ii  zram-config                                 0.5                                          all          Upstart job to enable zram support

Merci smile


Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM  6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go

Hors ligne

#50 Le 22/04/2018, à 09:51

arzavapi

Re : "the system is running low card graphics" ? [non résolu]

Ca ne change rien...
Au redémarrage j'ai toujours les mêmes alertes ( voir au #17)


Ubuntu 20.04 LTS - MSI (2015) Intel Pentium CPU 3560M 2.40GHz 64 bits - RAM  6 Gio 395940 KIB - Intel Corporation Xeon E3-1200 / SSD Crucial 240 Go

Hors ligne