Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

Pages : 1 2 3

#26 Le 08/07/2018, à 20:58

NicoApi73

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

NicoApi73 a écrit :

et

cat /var/log/kern.log | grep -2 fifo | tail -50

Cordialement

STP.

Hors ligne

#27 Le 08/07/2018, à 21:06

ameni.issaoui

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

pas de résultat pour la commande
cat /var/log/kern.log | grep -2 fifo | tail -50

Hors ligne

#28 Le 08/07/2018, à 21:34

NicoApi73

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

ameni.issaoui a écrit :
cat /var/log/kern.log | grep -2 watchdog | tail -50
Jul  8 19:40:04 ameni-X541UJ kernel: [    0.036759] ... event mask:             000000070000000f
Jul  8 19:40:04 ameni-X541UJ kernel: [    0.036799] Hierarchical SRCU implementation.
Jul  8 19:40:04 ameni-X541UJ kernel: [    0.037760] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
Jul  8 19:40:04 ameni-X541UJ kernel: [    0.037773] smp: Bringing up secondary CPUs ...
Jul  8 19:40:04 ameni-X541UJ kernel: [    0.037838] x86: Booting SMP configuration:

Le message ne me choque pas. Ce qui est plus surprenant, c'est qu'il ne soit logger qu'une seule fois. Il devrait l'être à chaque fois que l'ordinateur est démarré, sauf si logrotate vient de s'exécuter.

Peux tu passer la commande suivante :

cat /var/log/kern.log.1 | grep -2 watchdog | tail -50

et

cat /var/log/kern.log.1 | grep -2 fifo | tail -50

J'ai modifié le post #24. Les 2 liens sont différents. Le premier parle du watchdog et le second de la fifo.

Mais les 2 renvoient sur le driver nVidia. Faudra peut être penser à l'installer, même si je voudrais bien voir le message d'erreur que tu as avant de faire la manip.

Dernière modification par NicoApi73 (Le 08/07/2018, à 21:40)

Hors ligne

#29 Le 08/07/2018, à 21:38

ameni.issaoui

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

cat /var/log/kern.log.1 | grep -2 watchdog | tail -50
Jul  6 19:49:25 ameni-X541UJ kernel: [    0.037791] smp: Bringing up secondary CPUs ...
Jul  6 19:49:25 ameni-X541UJ kernel: [    0.037857] x86: Booting SMP configuration:
--
Jul  7 11:12:17 ameni-X541UJ kernel: [    0.036310] ... event mask:             000000070000000f
Jul  7 11:12:17 ameni-X541UJ kernel: [    0.036350] Hierarchical SRCU implementation.
Jul  7 11:12:17 ameni-X541UJ kernel: [    0.037318] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
Jul  7 11:12:17 ameni-X541UJ kernel: [    0.037331] smp: Bringing up secondary CPUs ...
Jul  7 11:12:17 ameni-X541UJ kernel: [    0.037395] x86: Booting SMP configuration:
--
Jul  7 21:56:16 ameni-X541UJ kernel: [    0.036226] ... event mask:             000000070000000f
Jul  7 21:56:16 ameni-X541UJ kernel: [    0.036266] Hierarchical SRCU implementation.
Jul  7 21:56:16 ameni-X541UJ kernel: [    0.037222] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
Jul  7 21:56:16 ameni-X541UJ kernel: [    0.037245] smp: Bringing up secondary CPUs ...
Jul  7 21:56:16 ameni-X541UJ kernel: [    0.037309] x86: Booting SMP configuration:
--
Jul  7 22:08:30 ameni-X541UJ kernel: [    0.036319] ... event mask:             000000070000000f
Jul  7 22:08:30 ameni-X541UJ kernel: [    0.036358] Hierarchical SRCU implementation.
Jul  7 22:08:30 ameni-X541UJ kernel: [    0.037319] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
Jul  7 22:08:30 ameni-X541UJ kernel: [    0.037332] smp: Bringing up secondary CPUs ...
Jul  7 22:08:30 ameni-X541UJ kernel: [    0.037398] x86: Booting SMP configuration:
--
Jul  7 22:15:03 ameni-X541UJ kernel: [    0.036121] ... event mask:             000000070000000f
Jul  7 22:15:03 ameni-X541UJ kernel: [    0.036160] Hierarchical SRCU implementation.
Jul  7 22:15:03 ameni-X541UJ kernel: [    0.037115] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
Jul  7 22:15:03 ameni-X541UJ kernel: [    0.037128] smp: Bringing up secondary CPUs ...
Jul  7 22:15:03 ameni-X541UJ kernel: [    0.037193] x86: Booting SMP configuration:
--
Jul  8 09:32:53 ameni-X541UJ kernel: [    0.036000] x86: Booting SMP configuration:
Jul  8 09:32:53 ameni-X541UJ kernel: [    0.036000] .... node  #0, CPUs:      #1
Jul  8 09:32:53 ameni-X541UJ kernel: [    0.036000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
Jul  8 09:32:53 ameni-X541UJ kernel: [    0.036000]  #2 #3
Jul  8 09:32:53 ameni-X541UJ kernel: [    0.036233] smp: Brought up 1 node, 4 CPUs
--
Jul  8 13:03:03 ameni-X541UJ kernel: [    0.036681] ... event mask:             000000070000000f
Jul  8 13:03:03 ameni-X541UJ kernel: [    0.036721] Hierarchical SRCU implementation.
Jul  8 13:03:03 ameni-X541UJ kernel: [    0.037682] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
Jul  8 13:03:03 ameni-X541UJ kernel: [    0.037694] smp: Bringing up secondary CPUs ...
Jul  8 13:03:03 ameni-X541UJ kernel: [    0.037759] x86: Booting SMP configuration:
--
Jul  8 13:09:19 ameni-X541UJ kernel: [    0.036718] ... event mask:             000000070000000f
Jul  8 13:09:19 ameni-X541UJ kernel: [    0.036759] Hierarchical SRCU implementation.
Jul  8 13:09:19 ameni-X541UJ kernel: [    0.037729] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
Jul  8 13:09:19 ameni-X541UJ kernel: [    0.037741] smp: Bringing up secondary CPUs ...
Jul  8 13:09:19 ameni-X541UJ kernel: [    0.037807] x86: Booting SMP configuration:
--
Jul  8 13:14:58 ameni-X541UJ kernel: [    0.036264] ... event mask:             000000070000000f
Jul  8 13:14:58 ameni-X541UJ kernel: [    0.036304] Hierarchical SRCU implementation.
Jul  8 13:14:58 ameni-X541UJ kernel: [    0.037270] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
Jul  8 13:14:58 ameni-X541UJ kernel: [    0.037282] smp: Bringing up secondary CPUs ...
Jul  8 13:14:58 ameni-X541UJ kernel: [    0.037347] x86: Booting SMP configuration:
cat /var/log/kern.log.1 | grep -2 fifo | tail -50
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398459] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398471] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398482] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398493] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398505] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398516] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398528] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398539] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398551] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398562] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398574] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398585] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398597] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398610] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398622] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398634] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398645] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398658] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398671] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398682] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398694] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398706] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398717] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398729] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398741] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398752] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398766] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398778] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398790] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398802] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398813] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398826] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398838] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398849] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398861] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398872] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398884] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398895] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:05:53 ameni-X541UJ kernel: [21886.398907] nouveau 0000:01:00.0: fifo: SCHED_ERROR 20 []
Jul  5 17:21:05 ameni-X541UJ kernel: [    0.000000] microcode: microcode updated early to revision 0x84, date = 2018-01-21
Jul  5 17:21:05 ameni-X541UJ kernel: [    0.000000] Linux version 4.15.0-24-generic (buildd@lgw01-amd64-056) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #26-Ubuntu SMP Wed Jun 13 08:44:47 UTC 2018 (Ubuntu 4.15.0-24.26-generic 4.15.18)
--
Jul  5 20:57:47 ameni-X541UJ kernel: [   48.604653] pcieport 0000:00:1c.5:   device [8086:9d15] error status/mask=00001000/00002000
Jul  5 20:57:47 ameni-X541UJ kernel: [   48.604658] pcieport 0000:00:1c.5:    [12] Replay Timer Timeout  
Jul  5 20:57:47 ameni-X541UJ kernel: [   48.862373] nouveau 0000:01:00.0: fifo: BIND_ERROR 00 []
Jul  5 20:57:47 ameni-X541UJ kernel: [   48.862385] nouveau 0000:01:00.0: fifo: PIO_ERROR
Jul  5 20:57:47 ameni-X541UJ kernel: [   48.862390] nouveau 0000:01:00.0: fifo: FB_FLUSH_TIMEOUT
Jul  5 20:57:47 ameni-X541UJ kernel: [   48.862398] nouveau 0000:01:00.0: fifo: DROPPED_MMU_FAULT 00000000
Jul  5 20:57:47 ameni-X541UJ kernel: [   48.862460] nouveau 0000:01:00.0: bus: MMIO read of 00000000 FAULT at 6013d4 [ !ENGINE ]
Jul  5 20:58:01 ameni-X541UJ kernel: [   62.990584] pcieport 0000:00:1c.5: AER: Corrected error received: id=00e5

Hors ligne

#30 Le 08/07/2018, à 21:44

NicoApi73

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

ok, ça vient du driver de la carte graphique (nouveau).

installe le driver nVidia. Dans le Gestionnaire de mise à jour, peux tu aller dans l'onglet Pilotes additionnels et tu cliques sur Utilisation de NVIDIA. Tu valides en cliquant sur "Appliquer les changements" et tu laisses faire.

Dernière modification par NicoApi73 (Le 08/07/2018, à 21:46)

Hors ligne

#31 Le 08/07/2018, à 21:49

ameni.issaoui

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

je choisis le 1er nVidia driver 390???
a

Dernière modification par ameni.issaoui (Le 08/07/2018, à 21:51)

Hors ligne

#32 Le 08/07/2018, à 21:51

NicoApi73

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

oui

Hors ligne

#33 Le 08/07/2018, à 21:53

ameni.issaoui

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

ok merci beaucoup et j’espère que le problème se résolue
cordialement

Hors ligne

#34 Le 08/07/2018, à 23:12

NicoApi73

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

Tiens nous au courant STP

Hors ligne

#35 Le 09/07/2018, à 15:52

ameni.issaoui

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

pour le moment tout est bien mais une chose de nouveau : lorsque je démarre le pc il m'affiche une liste des services qui sont démarrés et puis il démarre normalement

Hors ligne

#36 Le 09/07/2018, à 15:58

NicoApi73

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

Bonjour,

peux tu faire :

cat /etc/default/grub

Fais également :

dmesg -lerr

STP

Je me rappelle qu'à chaque fois que j'ai installé le pilote prorpiétaire, l'affichage lors du boot a été modifié. Pour moi, c'est lié à l'installation du driver nVidia, et c'est normal.

Cordialement

Dernière modification par NicoApi73 (Le 09/07/2018, à 16:07)

Hors ligne

#37 Le 09/07/2018, à 16:06

ameni.issaoui

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

cat /etc/default/grub
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash pcie_aspm=off"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"
dmesg -lerr
[    0.000000] ACPI Error: [PRT0] Namespace lookup failure, AE_ALREADY_EXISTS (20170831/dswload-378)
[    0.000000] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20170831/psobject-252)
[    0.000000] ACPI Exception: AE_ALREADY_EXISTS, (SSDT:SataTabl) while loading table (20170831/tbxfload-228)
[    0.000000] ACPI Error: 1 table load failures, 8 successful (20170831/tbxfload-246)
[    1.099062] Couldn't get size: 0x800000000000000e
[    1.099064] MODSIGN: Couldn't get UEFI db list
[    1.101733] Couldn't get size: 0x800000000000000e
[    1.338171] PKCS#7 signature not signed with a trusted key
[    1.358136] PKCS#7 signature not signed with a trusted key
[    1.359555] PKCS#7 signature not signed with a trusted key
[   23.130223] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[   23.130229] tpm_crb MSFT0101:00: [Firmware Bug]: ACPI region does not cover the entire command/response buffer. [mem 0xfed40000-0xfed4087f flags 0x200] vs fed40080 f80
[   23.306262] PKCS#7 signature not signed with a trusted key
[   49.526827] PKCS#7 signature not signed with a trusted key
[   49.747045] PKCS#7 signature not signed with a trusted key
[   49.799613] PKCS#7 signature not signed with a trusted key
[   49.836232] PKCS#7 signature not signed with a trusted key

Hors ligne

#38 Le 09/07/2018, à 16:15

NicoApi73

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

Pour moi, c'est ok. Si ton pc ne plante plus, peux tu passer ton topic en résolu, en modifiant ton premier message et en mettant "[RESOLU]" au début du titre.

J'ai modifié le post #38. J'ai déjà constaté ça chez moi, quand j'ai installé les pilotes nVidia.

Si ça plante dans les mêmes conditions, tu réouvriras. Si c'est autre chose, nouveau topic.

Cordialement

Dernière modification par NicoApi73 (Le 09/07/2018, à 16:16)

Hors ligne

#39 Le 09/07/2018, à 16:22

ameni.issaoui

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

ok merci bcp
cordialement

Hors ligne

#40 Le 11/07/2018, à 16:02

ameni.issaoui

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

bonjour maintenant j'ai utilisé le pc et de façon inattendue il se bloque dans un écran noir comme suit :

https://zupimages.net/up/18/28/ym6b.jpg

donc j'ai forcé l’arrêt par le bouton d"extinction



Modération : merci d'utiliser des images de petite taille (300x300) ou des miniatures pointant sur ces images (Des hébergeurs comme Toile Libre, TDCT'Pix le permettent).

Dernière modification par cqfd93 (Le 11/07/2018, à 18:10)

Hors ligne

#41 Le 11/07/2018, à 16:21

NicoApi73

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

Bonjour,

Il n'y a pas d'image ni de description.

Cordialement

Hors ligne

#42 Le 11/07/2018, à 16:29

ameni.issaoui

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

comme j'ai vous dit précédemment que tout est bien et lorsque je démarre le pc il m'affiche une liste des services qui sont démarrés et puis il démarre normalement. comme la photo que j'ai déjà postuler mais dans cette fois il a affiché la méme liste des services et  s'est bloqué

Dernière modification par ameni.issaoui (Le 11/07/2018, à 16:30)

Hors ligne

#43 Le 11/07/2018, à 16:35

NicoApi73

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

Je ne comprends pas :
Est ce que tu arrives à démarrer l'ordinateur et il se bloque après ou est ce que maintenant il ne démarre plus? Il se bloque au bout de combien de temps?
Reposte la capture d'écran ou la photo, car là je ne vois pas de quoi tu parles STP.

Il nous faut plus d'information pour pouvoir investiguer.

Cordialement

Hors ligne

#44 Le 11/07/2018, à 16:46

ameni.issaoui

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

lorsque j'arrive à démarrer le pc il charge le sigle de ubuntu et puis il m'ouvre cette image ;
https://zupimages.net/up/18/28/ym6b.jpg
dans qlq secondes ma session s'ouvre normalement . cette phénomène est répéter toujours depuis l’installation de driver nVidia . aujourd’hui le même phénomène est faite mais dans cette fois après  5mn de l'ouverture de ma session le même image est apparue dans mon écran et le pc se bloque . est ce que tu m'a comprend ??


Modération : merci d'utiliser des images de petite taille (300x300) ou des miniatures pointant sur ces images (Des hébergeurs comme Toile Libre, TDCT'Pix le permettent).

Dernière modification par cqfd93 (Le 11/07/2018, à 18:11)

Hors ligne

#45 Le 11/07/2018, à 17:05

NicoApi73

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

ameni.issaoui a écrit :

lorsque j'arrive à démarrer le pc il charge le sigle de ubuntu et puis il m'ouvre cette image ;
https://zupimages.net/up/18/28/ym6b.jpg
dans qlq secondes ma session s'ouvre normalement . cette phénomène est répéter toujours depuis l’installation de driver nVidia . aujourd’hui le même phénomène est faite mais dans cette fois après  5mn de l'ouverture de ma session le même image est apparue dans mon écran et le pc se bloque . est ce que tu m'a comprend ??

ok. Pour une raison que j'ignore, je n'arrive pas à ouvrir ton image. Et à la place de l'URL, j'ai la lettre "a", sans lien... Le lien est apparu quand je t'ai cité.

Je viens de réussir à l'ouvrir. J'ai ceci sur tout mes ordinateur lors du boot (sauf la dernière ligne) et si tu retires l'option quiet dans le grub, tu aurais encore plus de détails. Par contre, ce n'est que lors du boot et lors de l'arrêt de la machine et ça ne bloque pas dessus...

Tu travaillais avec quoi comme logiciel?

Cordialement

Dernière modification par NicoApi73 (Le 12/07/2018, à 10:11)

Hors ligne

#46 Le 11/07/2018, à 17:14

ameni.issaoui

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

toujours cette image est apparue lors du boot et puis le pc démarre normalement maintenant lors du boot il se bloque dans cette ecran noir

Dernière modification par ameni.issaoui (Le 11/07/2018, à 17:22)

Hors ligne

#47 Le 11/07/2018, à 17:33

NicoApi73

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

Lance une session live, après un plantage et donne le retour de :

echo;tail -200 /var/log/kern.log;echo;tail -200 /var/log/syslog

Cordialement

Hors ligne

#48 Le 11/07/2018, à 17:37

ameni.issaoui

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

Jul 11 14:57:51 ameni-X541UJ kernel: [   27.029541] ath: EEPROM indicates we should expect a direct regpair map
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.029542] ath: Country alpha2 being used: 00
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.029543] ath: Regpair used: 0x6c
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.036999] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.037392] ieee80211 phy0: Atheros AR9565 Rev:2 mem=0xffffb62d01800000, irq=17
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.045958] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC256: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:speaker
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.045960] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.045962] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.045964] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.045965] snd_hda_codec_realtek hdaudioC0D0:    inputs:
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.045967] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.045968] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x1a
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.045969] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x13
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.082589] asus_wmi: ASUS WMI generic driver loaded
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.083637] asus_wmi: Initialization: 0x1
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.083686] asus_wmi: BIOS WMI version: 9.0
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.083735] asus_wmi: SFUN value: 0x21
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.085351] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input10
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.085452] asus_wmi: Number of fans: 0
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.103939] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.103994] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.104049] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.104095] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.104141] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.104190] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.154838] hid-multitouch 0018:04F3:3045.0002: Ignoring the extra HID_DG_INPUTMODE
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.154885] input: ELAN1200:00 04F3:3045 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-6/i2c-ELAN1200:00/0018:04F3:3045.0002/input/input18
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.154987] hid-multitouch 0018:04F3:3045.0002: input,hidraw1: I2C HID v1.00 Mouse [ELAN1200:00 04F3:3045] on i2c-ELAN1200:00
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.163696] ath9k 0000:03:00.0 wlp3s0: renamed from wlan0
Jul 11 14:57:51 ameni-X541UJ kernel: [   27.236068] usb 1-8: new full-speed USB device number 5 using xhci_hcd
Jul 11 14:57:51 ameni-X541UJ kernel: [   35.966798] audit: type=1400 audit(1531317469.353:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=740 comm="apparmor_parser"
Jul 11 14:57:51 ameni-X541UJ kernel: [   35.966801] audit: type=1400 audit(1531317469.353:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=740 comm="apparmor_parser"
Jul 11 14:57:51 ameni-X541UJ kernel: [   35.966803] audit: type=1400 audit(1531317469.353:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=740 comm="apparmor_parser"
Jul 11 14:57:51 ameni-X541UJ kernel: [   35.966804] audit: type=1400 audit(1531317469.353:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=740 comm="apparmor_parser"
Jul 11 14:57:51 ameni-X541UJ kernel: [   35.968291] audit: type=1400 audit(1531317469.357:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=744 comm="apparmor_parser"
Jul 11 14:57:51 ameni-X541UJ kernel: [   35.968293] audit: type=1400 audit(1531317469.357:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=744 comm="apparmor_parser"
Jul 11 14:57:51 ameni-X541UJ kernel: [   35.968295] audit: type=1400 audit(1531317469.357:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=744 comm="apparmor_parser"
Jul 11 14:57:51 ameni-X541UJ kernel: [   35.969422] audit: type=1400 audit(1531317469.357:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=750 comm="apparmor_parser"
Jul 11 14:57:51 ameni-X541UJ kernel: [   35.971490] audit: type=1400 audit(1531317469.357:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=751 comm="apparmor_parser"
Jul 11 14:57:51 ameni-X541UJ kernel: [   35.971493] audit: type=1400 audit(1531317469.357:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=751 comm="apparmor_parser"
Jul 11 14:57:51 ameni-X541UJ kernel: [   37.852251] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
Jul 11 14:57:51 ameni-X541UJ kernel: [   38.060221] usb 1-8: Device not responding to setup address.
Jul 11 14:57:51 ameni-X541UJ kernel: [   38.268069] usb 1-8: device not accepting address 5, error -71
Jul 11 14:57:51 ameni-X541UJ kernel: [   38.400074] usb 1-8: new full-speed USB device number 6 using xhci_hcd
Jul 11 14:57:51 ameni-X541UJ kernel: [   38.548949] usb 1-8: New USB device found, idVendor=04ca, idProduct=3010
Jul 11 14:57:51 ameni-X541UJ kernel: [   38.548950] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Jul 11 14:57:51 ameni-X541UJ kernel: [   38.569671] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Jul 11 14:57:51 ameni-X541UJ kernel: [   38.569672] Bluetooth: BNEP filters: protocol multicast
Jul 11 14:57:51 ameni-X541UJ kernel: [   38.569674] Bluetooth: BNEP socket layer initialized
Jul 11 14:57:55 ameni-X541UJ kernel: [   42.509386] IPv6: ADDRCONF(NETDEV_UP): enp2s0f2: link is not ready
Jul 11 14:57:56 ameni-X541UJ kernel: [   42.686206] r8169 0000:02:00.2 enp2s0f2: link down
Jul 11 14:57:56 ameni-X541UJ kernel: [   42.686267] IPv6: ADDRCONF(NETDEV_UP): enp2s0f2: link is not ready
Jul 11 14:57:56 ameni-X541UJ kernel: [   42.710931] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Jul 11 14:57:56 ameni-X541UJ kernel: [   42.724355] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Jul 11 14:57:56 ameni-X541UJ kernel: [   42.808366] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Jul 11 14:57:56 ameni-X541UJ kernel: [   43.288926] show_signal_msg: 17 callbacks suppressed
Jul 11 14:57:56 ameni-X541UJ kernel: [   43.288928] gnome-shell[1001]: segfault at 20 ip 00007f0f0f3e155d sp 00007fff4fbd5f80 error 4 in libmutter-2.so.0.0.0[7f0f0f2f3000+156000]
Jul 11 14:57:57 ameni-X541UJ kernel: [   43.783154] wlp3s0: authenticate with 60:83:34:c2:8d:44
Jul 11 14:57:57 ameni-X541UJ kernel: [   43.795621] wlp3s0: send auth to 60:83:34:c2:8d:44 (try 1/3)
Jul 11 14:57:57 ameni-X541UJ kernel: [   43.797587] wlp3s0: authenticated
Jul 11 14:57:57 ameni-X541UJ kernel: [   43.804024] wlp3s0: associate with 60:83:34:c2:8d:44 (try 1/3)
Jul 11 14:57:57 ameni-X541UJ kernel: [   43.808278] wlp3s0: RX AssocResp from 60:83:34:c2:8d:44 (capab=0x431 status=0 aid=1)
Jul 11 14:57:57 ameni-X541UJ kernel: [   43.808403] wlp3s0: associated
Jul 11 14:57:57 ameni-X541UJ kernel: [   43.808455] ath: EEPROM regdomain: 0x8314
Jul 11 14:57:57 ameni-X541UJ kernel: [   43.808456] ath: EEPROM indicates we should expect a country code
Jul 11 14:57:57 ameni-X541UJ kernel: [   43.808457] ath: doing EEPROM country->regdmn map search
Jul 11 14:57:57 ameni-X541UJ kernel: [   43.808457] ath: country maps to regdmn code: 0x36
Jul 11 14:57:57 ameni-X541UJ kernel: [   43.808458] ath: Country alpha2 being used: TN
Jul 11 14:57:57 ameni-X541UJ kernel: [   43.808458] ath: Regpair used: 0x36
Jul 11 14:57:57 ameni-X541UJ kernel: [   43.808459] ath: regdomain 0x8314 dynamically updated by country IE
Jul 11 14:57:57 ameni-X541UJ kernel: [   44.377104] nvidia-modeset: Allocated GPU:0 (GPU-f92eb2c7-c669-353b-b189-a7e0e24ffd7f) @ PCI:0000:01:00.0
Jul 11 14:57:57 ameni-X541UJ kernel: [   44.377390] nvidia-modeset: Freed GPU:0 (GPU-f92eb2c7-c669-353b-b189-a7e0e24ffd7f) @ PCI:0000:01:00.0
Jul 11 14:57:57 ameni-X541UJ kernel: [   44.428488] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Jul 11 14:57:59 ameni-X541UJ kernel: [   45.675553] nvidia-modeset: Allocated GPU:0 (GPU-f92eb2c7-c669-353b-b189-a7e0e24ffd7f) @ PCI:0000:01:00.0
Jul 11 14:57:59 ameni-X541UJ kernel: [   45.676103] nvidia-modeset: Freed GPU:0 (GPU-f92eb2c7-c669-353b-b189-a7e0e24ffd7f) @ PCI:0000:01:00.0
Jul 11 14:58:01 ameni-X541UJ kernel: [   48.416472] nvidia-modeset: Allocated GPU:0 (GPU-f92eb2c7-c669-353b-b189-a7e0e24ffd7f) @ PCI:0000:01:00.0
Jul 11 14:58:01 ameni-X541UJ kernel: [   48.416718] nvidia-modeset: Freed GPU:0 (GPU-f92eb2c7-c669-353b-b189-a7e0e24ffd7f) @ PCI:0000:01:00.0
Jul 11 14:58:02 ameni-X541UJ kernel: [   48.767936] PKCS#7 signature not signed with a trusted key
Jul 11 14:58:02 ameni-X541UJ kernel: [   48.782416] vboxdrv: Found 4 processor cores
Jul 11 14:58:02 ameni-X541UJ kernel: [   48.800184] vboxdrv: TSC mode is Invariant, tentative frequency 2712004183 Hz
Jul 11 14:58:02 ameni-X541UJ kernel: [   48.800186] vboxdrv: Successfully loaded version 5.2.10_Ubuntu (interface 0x00290001)
Jul 11 14:58:02 ameni-X541UJ kernel: [   48.802128] nvidia-modeset: Allocated GPU:0 (GPU-f92eb2c7-c669-353b-b189-a7e0e24ffd7f) @ PCI:0000:01:00.0
Jul 11 14:58:02 ameni-X541UJ kernel: [   48.802386] nvidia-modeset: Freed GPU:0 (GPU-f92eb2c7-c669-353b-b189-a7e0e24ffd7f) @ PCI:0000:01:00.0
Jul 11 14:58:02 ameni-X541UJ kernel: [   48.804436] PKCS#7 signature not signed with a trusted key
Jul 11 14:58:02 ameni-X541UJ kernel: [   48.804731] VBoxNetFlt: Successfully started.
Jul 11 14:58:02 ameni-X541UJ kernel: [   48.809028] PKCS#7 signature not signed with a trusted key
Jul 11 14:58:02 ameni-X541UJ kernel: [   48.810238] VBoxNetAdp: Successfully started.
Jul 11 14:58:02 ameni-X541UJ kernel: [   48.815066] PKCS#7 signature not signed with a trusted key
Jul 11 14:58:02 ameni-X541UJ kernel: [   48.815402] VBoxPciLinuxInit
Jul 11 14:58:02 ameni-X541UJ kernel: [   48.817278] vboxpci: IOMMU not found (not registered)
Jul 11 14:58:13 ameni-X541UJ kernel: [   60.370794] nvidia-modeset: Allocated GPU:0 (GPU-f92eb2c7-c669-353b-b189-a7e0e24ffd7f) @ PCI:0000:01:00.0
Jul 11 14:58:13 ameni-X541UJ kernel: [   60.371070] nvidia-modeset: Freed GPU:0 (GPU-f92eb2c7-c669-353b-b189-a7e0e24ffd7f) @ PCI:0000:01:00.0
Jul 11 14:58:14 ameni-X541UJ kernel: [   61.267306] nvidia-modeset: Allocated GPU:0 (GPU-f92eb2c7-c669-353b-b189-a7e0e24ffd7f) @ PCI:0000:01:00.0
Jul 11 14:58:14 ameni-X541UJ kernel: [   61.267816] nvidia-modeset: Freed GPU:0 (GPU-f92eb2c7-c669-353b-b189-a7e0e24ffd7f) @ PCI:0000:01:00.0
Jul 11 14:58:23 ameni-X541UJ kernel: [   70.194757] nvidia-modeset: Allocated GPU:0 (GPU-f92eb2c7-c669-353b-b189-a7e0e24ffd7f) @ PCI:0000:01:00.0
Jul 11 14:58:23 ameni-X541UJ kernel: [   70.195007] nvidia-modeset: Freed GPU:0 (GPU-f92eb2c7-c669-353b-b189-a7e0e24ffd7f) @ PCI:0000:01:00.0
Jul 11 14:58:24 ameni-X541UJ kernel: [   70.738076] nvidia-modeset: Allocated GPU:0 (GPU-f92eb2c7-c669-353b-b189-a7e0e24ffd7f) @ PCI:0000:01:00.0
Jul 11 14:58:24 ameni-X541UJ kernel: [   70.738365] nvidia-modeset: Freed GPU:0 (GPU-f92eb2c7-c669-353b-b189-a7e0e24ffd7f) @ PCI:0000:01:00.0
Jul 11 14:58:24 ameni-X541UJ kernel: [   71.100205] Bluetooth: RFCOMM TTY layer initialized
Jul 11 14:58:24 ameni-X541UJ kernel: [   71.100215] Bluetooth: RFCOMM socket layer initialized
Jul 11 14:58:24 ameni-X541UJ kernel: [   71.100221] Bluetooth: RFCOMM ver 1.11
Jul 11 14:58:28 ameni-X541UJ kernel: [   74.477636] rfkill: input handler disabled
Jul 11 14:58:42 ameni-X541UJ kernel: [   89.031569] nvidia-modeset: Allocated GPU:0 (GPU-f92eb2c7-c669-353b-b189-a7e0e24ffd7f) @ PCI:0000:01:00.0
Jul 11 14:58:42 ameni-X541UJ kernel: [   89.031832] nvidia-modeset: Freed GPU:0 (GPU-f92eb2c7-c669-353b-b189-a7e0e24ffd7f) @ PCI:0000:01:00.0
Jul 11 16:01:23 ameni-X541UJ kernel: [ 3849.478851] wlp3s0: authenticate with 60:83:34:c2:8d:44
Jul 11 16:01:23 ameni-X541UJ kernel: [ 3849.497206] wlp3s0: send auth to 60:83:34:c2:8d:44 (try 1/3)
Jul 11 16:01:23 ameni-X541UJ kernel: [ 3849.598392] wlp3s0: send auth to 60:83:34:c2:8d:44 (try 2/3)
Jul 11 16:01:23 ameni-X541UJ kernel: [ 3849.890395] wlp3s0: send auth to 60:83:34:c2:8d:44 (try 3/3)
Jul 11 16:01:24 ameni-X541UJ kernel: [ 3850.194395] wlp3s0: authentication with 60:83:34:c2:8d:44 timed out
Jul 11 16:01:25 ameni-X541UJ kernel: [ 3851.682677] wlp3s0: authenticate with 60:83:34:c2:8d:44
Jul 11 16:01:25 ameni-X541UJ kernel: [ 3851.697246] wlp3s0: send auth to 60:83:34:c2:8d:44 (try 1/3)
Jul 11 16:01:25 ameni-X541UJ kernel: [ 3851.802354] wlp3s0: send auth to 60:83:34:c2:8d:44 (try 2/3)
Jul 11 16:01:25 ameni-X541UJ kernel: [ 3851.831047] wlp3s0: send auth to 60:83:34:c2:8d:44 (try 3/3)
Jul 11 16:01:25 ameni-X541UJ kernel: [ 3851.834048] wlp3s0: authenticated
Jul 11 16:01:25 ameni-X541UJ kernel: [ 3851.834715] wlp3s0: associate with 60:83:34:c2:8d:44 (try 1/3)
Jul 11 16:01:25 ameni-X541UJ kernel: [ 3851.840756] wlp3s0: RX AssocResp from 60:83:34:c2:8d:44 (capab=0x431 status=0 aid=1)
Jul 11 16:01:25 ameni-X541UJ kernel: [ 3851.840882] wlp3s0: associated
Jul 11 16:01:25 ameni-X541UJ kernel: [ 3851.841103] ath: EEPROM regdomain: 0x8314
Jul 11 16:01:25 ameni-X541UJ kernel: [ 3851.841104] ath: EEPROM indicates we should expect a country code
Jul 11 16:01:25 ameni-X541UJ kernel: [ 3851.841105] ath: doing EEPROM country->regdmn map search
Jul 11 16:01:25 ameni-X541UJ kernel: [ 3851.841105] ath: country maps to regdmn code: 0x36
Jul 11 16:01:25 ameni-X541UJ kernel: [ 3851.841106] ath: Country alpha2 being used: TN
Jul 11 16:01:25 ameni-X541UJ kernel: [ 3851.841107] ath: Regpair used: 0x36
Jul 11 16:01:25 ameni-X541UJ kernel: [ 3851.841108] ath: regdomain 0x8314 dynamically updated by country IE
Jul 11 16:01:32 ameni-X541UJ kernel: [ 3858.276130] wlp3s0: deauthenticated from 60:83:34:c2:8d:44 (Reason: 15=4WAY_HANDSHAKE_TIMEOUT)
Jul 11 16:03:32 ameni-X541UJ kernel: [ 3978.524946] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Jul 11 16:04:47 ameni-X541UJ kernel: [ 4053.995547] nvidia-modeset: Allocated GPU:0 (GPU-f92eb2c7-c669-353b-b189-a7e0e24ffd7f) @ PCI:0000:01:00.0
Jul 11 16:04:47 ameni-X541UJ kernel: [ 4053.995821] nvidia-modeset: Freed GPU:0 (GPU-f92eb2c7-c669-353b-b189-a7e0e24ffd7f) @ PCI:0000:01:00.0
Jul 11 16:04:50 ameni-X541UJ kernel: [ 4056.621583] wlp3s0: authenticate with 60:83:34:c2:8d:44
Jul 11 16:04:50 ameni-X541UJ kernel: [ 4056.634149] wlp3s0: send auth to 60:83:34:c2:8d:44 (try 1/3)
Jul 11 16:04:50 ameni-X541UJ kernel: [ 4056.636117] wlp3s0: authenticated
Jul 11 16:04:50 ameni-X541UJ kernel: [ 4056.637582] wlp3s0: associate with 60:83:34:c2:8d:44 (try 1/3)
Jul 11 16:04:50 ameni-X541UJ kernel: [ 4056.641950] wlp3s0: RX AssocResp from 60:83:34:c2:8d:44 (capab=0x431 status=0 aid=1)
Jul 11 16:04:50 ameni-X541UJ kernel: [ 4056.642078] wlp3s0: associated
Jul 11 16:04:50 ameni-X541UJ kernel: [ 4056.642141] ath: EEPROM regdomain: 0x8314
Jul 11 16:04:50 ameni-X541UJ kernel: [ 4056.642142] ath: EEPROM indicates we should expect a country code
Jul 11 16:04:50 ameni-X541UJ kernel: [ 4056.642143] ath: doing EEPROM country->regdmn map search
Jul 11 16:04:50 ameni-X541UJ kernel: [ 4056.642144] ath: country maps to regdmn code: 0x36
Jul 11 16:04:50 ameni-X541UJ kernel: [ 4056.642145] ath: Country alpha2 being used: TN
Jul 11 16:04:50 ameni-X541UJ kernel: [ 4056.642145] ath: Regpair used: 0x36
Jul 11 16:04:50 ameni-X541UJ kernel: [ 4056.642146] ath: regdomain 0x8314 dynamically updated by country IE
Jul 11 16:04:51 ameni-X541UJ kernel: [ 4057.416706] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Jul 11 16:05:25 ameni-X541UJ kernel: [ 4091.518386] wlp3s0: deauthenticating from 60:83:34:c2:8d:44 by local choice (Reason: 3=DEAUTH_LEAVING)
Jul 11 16:05:28 ameni-X541UJ kernel: [ 4094.301478] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Jul 11 16:05:28 ameni-X541UJ kernel: [ 4094.370688] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Jul 11 16:05:29 ameni-X541UJ kernel: [ 4095.346116] wlp3s0: authenticate with 60:83:34:c2:8d:44
Jul 11 16:05:29 ameni-X541UJ kernel: [ 4095.358893] wlp3s0: send auth to 60:83:34:c2:8d:44 (try 1/3)
Jul 11 16:05:29 ameni-X541UJ kernel: [ 4095.476618] wlp3s0: send auth to 60:83:34:c2:8d:44 (try 2/3)
Jul 11 16:05:29 ameni-X541UJ kernel: [ 4095.510496] wlp3s0: authenticated
Jul 11 16:05:29 ameni-X541UJ kernel: [ 4095.512616] wlp3s0: associate with 60:83:34:c2:8d:44 (try 1/3)
Jul 11 16:05:29 ameni-X541UJ kernel: [ 4095.517336] wlp3s0: RX AssocResp from 60:83:34:c2:8d:44 (capab=0x431 status=0 aid=1)
Jul 11 16:05:29 ameni-X541UJ kernel: [ 4095.517473] wlp3s0: associated
Jul 11 16:05:29 ameni-X541UJ kernel: [ 4095.517535] ath: EEPROM regdomain: 0x8314
Jul 11 16:05:29 ameni-X541UJ kernel: [ 4095.517536] ath: EEPROM indicates we should expect a country code
Jul 11 16:05:29 ameni-X541UJ kernel: [ 4095.517536] ath: doing EEPROM country->regdmn map search
Jul 11 16:05:29 ameni-X541UJ kernel: [ 4095.517537] ath: country maps to regdmn code: 0x36
Jul 11 16:05:29 ameni-X541UJ kernel: [ 4095.517538] ath: Country alpha2 being used: TN
Jul 11 16:05:29 ameni-X541UJ kernel: [ 4095.517538] ath: Regpair used: 0x36
Jul 11 16:05:29 ameni-X541UJ kernel: [ 4095.517539] ath: regdomain 0x8314 dynamically updated by country IE
Jul 11 16:05:31 ameni-X541UJ kernel: [ 4097.253053] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Jul 11 16:09:22 ameni-X541UJ kernel: [ 4328.903541] wlp3s0: deauthenticating from 60:83:34:c2:8d:44 by local choice (Reason: 3=DEAUTH_LEAVING)
Jul 11 16:09:29 ameni-X541UJ kernel: [ 4335.988852] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Jul 11 16:09:29 ameni-X541UJ kernel: [ 4336.043829] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.022686] wlp3s0: authenticate with 60:83:34:c2:8d:44
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.035353] wlp3s0: send auth to 60:83:34:c2:8d:44 (try 1/3)
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.040155] wlp3s0: authenticated
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.042780] wlp3s0: associate with 60:83:34:c2:8d:44 (try 1/3)
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.047102] wlp3s0: RX AssocResp from 60:83:34:c2:8d:44 (capab=0x431 status=0 aid=1)
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.047228] wlp3s0: associated
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.047289] ath: EEPROM regdomain: 0x8314
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.047289] ath: EEPROM indicates we should expect a country code
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.047290] ath: doing EEPROM country->regdmn map search
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.047291] ath: country maps to regdmn code: 0x36
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.047292] ath: Country alpha2 being used: TN
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.047292] ath: Regpair used: 0x36
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.047293] ath: regdomain 0x8314 dynamically updated by country IE
Jul 11 16:09:31 ameni-X541UJ kernel: [ 4337.389955] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Jul 11 16:10:56 ameni-X541UJ kernel: [ 4422.459314] ath: phy0: Could not kill baseband RX
Jul 11 16:12:51 ameni-X541UJ kernel: [ 4537.373055] ath: phy0: Could not kill baseband RX
Jul 11 16:14:53 ameni-X541UJ kernel: [ 4659.988352] wlp3s0: authenticate with 60:83:34:c2:8d:44
Jul 11 16:14:53 ameni-X541UJ kernel: [ 4660.006090] wlp3s0: send auth to 60:83:34:c2:8d:44 (try 1/3)
Jul 11 16:14:53 ameni-X541UJ kernel: [ 4660.013440] wlp3s0: authenticated
Jul 11 16:14:53 ameni-X541UJ kernel: [ 4660.018891] wlp3s0: associate with 60:83:34:c2:8d:44 (try 1/3)
Jul 11 16:14:54 ameni-X541UJ kernel: [ 4660.442939] wlp3s0: associate with 60:83:34:c2:8d:44 (try 2/3)
Jul 11 16:14:54 ameni-X541UJ kernel: [ 4660.539143] wlp3s0: RX AssocResp from 60:83:34:c2:8d:44 (capab=0x431 status=0 aid=1)
Jul 11 16:14:54 ameni-X541UJ kernel: [ 4660.539327] wlp3s0: associated
Jul 11 16:14:54 ameni-X541UJ kernel: [ 4660.539586] ath: EEPROM regdomain: 0x8314
Jul 11 16:14:54 ameni-X541UJ kernel: [ 4660.539589] ath: EEPROM indicates we should expect a country code
Jul 11 16:14:54 ameni-X541UJ kernel: [ 4660.539592] ath: doing EEPROM country->regdmn map search
Jul 11 16:14:54 ameni-X541UJ kernel: [ 4660.539596] ath: country maps to regdmn code: 0x36
Jul 11 16:14:54 ameni-X541UJ kernel: [ 4660.539599] ath: Country alpha2 being used: TN
Jul 11 16:14:54 ameni-X541UJ kernel: [ 4660.539601] ath: Regpair used: 0x36
Jul 11 16:14:54 ameni-X541UJ kernel: [ 4660.539605] ath: regdomain 0x8314 dynamically updated by country IE
Jul 11 16:15:32 ameni-X541UJ kernel: [ 4698.740923] ath: phy0: Could not kill baseband RX
Jul 11 16:16:42 ameni-X541UJ kernel: [ 4768.756732] asus_wmi: Unknown key cf pressed
Jul 11 16:16:42 ameni-X541UJ kernel: [ 4768.864718] acpi INT3400:00: Unsupported event [0x86]
Jul 11 16:19:44 ameni-X541UJ kernel: [ 4950.791622] ath: phy0: Could not kill baseband RX
Jul 11 16:20:39 ameni-X541UJ kernel: [ 5005.861211] ath: phy0: Could not kill baseband RX
Jul 11 16:22:50 ameni-X541UJ kernel: [ 5136.197293] perf: interrupt took too long (2519 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
Jul 11 16:23:26 ameni-X541UJ kernel: [ 5172.717273] ath: phy0: Could not kill baseband RX

Jul 11 16:09:23 ameni-X541UJ NetworkManager[834]: <info>  [1531321763.4428] manager: rfkill: WWAN hardware radio set disabled
Jul 11 16:09:23 ameni-X541UJ NetworkManager[834]: <info>  [1531321763.4429] audit: op="radio-control" arg="wwan-enabled:0" pid=1717 uid=1000 result="success"
Jul 11 16:09:25 ameni-X541UJ chromium-browser.desktop[1888]: [1888:1980:0711/160925.354723:ERROR:connection_factory_impl.cc(416)] Failed to connect to MCS endpoint with error -106
Jul 11 16:09:29 ameni-X541UJ NetworkManager[834]: <info>  [1531321769.7902] manager: rfkill: WiFi hardware radio set enabled
Jul 11 16:09:29 ameni-X541UJ systemd[1]: Starting Load/Save RF Kill Switch Status...
Jul 11 16:09:29 ameni-X541UJ systemd[1]: Started Load/Save RF Kill Switch Status.
Jul 11 16:09:29 ameni-X541UJ NetworkManager[834]: <info>  [1531321769.8072] audit: op="radio-control" arg="wireless-enabled:1" pid=3965 uid=1000 result="success"
Jul 11 16:09:29 ameni-X541UJ NetworkManager[834]: <info>  [1531321769.8075] manager: rfkill: WiFi now enabled by radio killswitch
Jul 11 16:09:29 ameni-X541UJ kernel: [ 4335.988852] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Jul 11 16:09:29 ameni-X541UJ wpa_supplicant[832]: dbus: fill_dict_with_properties dbus_interface=fi.w1.wpa_supplicant1.Interface dbus_property=Stations getter failed
Jul 11 16:09:29 ameni-X541UJ wpa_supplicant[832]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
Jul 11 16:09:29 ameni-X541UJ wpa_supplicant[832]: dbus: Failed to construct signal
Jul 11 16:09:29 ameni-X541UJ wpa_supplicant[832]: dbus: fill_dict_with_properties dbus_interface=fi.w1.wpa_supplicant1.Interface dbus_property=Stations getter failed
Jul 11 16:09:29 ameni-X541UJ NetworkManager[834]: <info>  [1531321769.8610] device (wlp3s0): supplicant interface state: starting -> ready
Jul 11 16:09:29 ameni-X541UJ NetworkManager[834]: <info>  [1531321769.8612] device (wlp3s0): state change: unavailable -> disconnected (reason 'supplicant-available', sys-iface-state: 'managed')
Jul 11 16:09:29 ameni-X541UJ kernel: [ 4336.043829] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
Jul 11 16:09:30 ameni-X541UJ NetworkManager[834]: <info>  [1531321770.8119] policy: auto-activating connection 'TOPNETC5D85F43'
Jul 11 16:09:30 ameni-X541UJ NetworkManager[834]: <info>  [1531321770.8131] device (wlp3s0): Activation: starting connection 'TOPNETC5D85F43' (165bc4e7-e704-4e3b-9c13-c707d62cff20)
Jul 11 16:09:30 ameni-X541UJ NetworkManager[834]: <info>  [1531321770.8133] device (wlp3s0): state change: disconnected -> prepare (reason 'none', sys-iface-state: 'managed')
Jul 11 16:09:30 ameni-X541UJ NetworkManager[834]: <info>  [1531321770.8135] manager: NetworkManager state is now CONNECTING
Jul 11 16:09:30 ameni-X541UJ NetworkManager[834]: <info>  [1531321770.8140] device (wlp3s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Jul 11 16:09:30 ameni-X541UJ NetworkManager[834]: <info>  [1531321770.8142] device (wlp3s0): Activation: (wifi) access point 'TOPNETC5D85F43' has security, but secrets are required.
Jul 11 16:09:30 ameni-X541UJ NetworkManager[834]: <info>  [1531321770.8143] device (wlp3s0): state change: config -> need-auth (reason 'none', sys-iface-state: 'managed')
Jul 11 16:09:30 ameni-X541UJ NetworkManager[834]: <info>  [1531321770.8144] sup-iface[0x56219bf35190,wlp3s0]: wps: type pbc start...
Jul 11 16:09:30 ameni-X541UJ NetworkManager[834]: <info>  [1531321770.8185] device (wlp3s0): state change: need-auth -> prepare (reason 'none', sys-iface-state: 'managed')
Jul 11 16:09:30 ameni-X541UJ NetworkManager[834]: <info>  [1531321770.8189] device (wlp3s0): state change: prepare -> config (reason 'none', sys-iface-state: 'managed')
Jul 11 16:09:30 ameni-X541UJ NetworkManager[834]: <info>  [1531321770.8191] device (wlp3s0): Activation: (wifi) connection 'TOPNETC5D85F43' has security, and secrets exist.  No new secrets needed.
Jul 11 16:09:30 ameni-X541UJ NetworkManager[834]: <info>  [1531321770.8192] Config: added 'ssid' value 'TOPNETC5D85F43'
Jul 11 16:09:30 ameni-X541UJ NetworkManager[834]: <info>  [1531321770.8192] Config: added 'scan_ssid' value '1'
Jul 11 16:09:30 ameni-X541UJ NetworkManager[834]: <info>  [1531321770.8192] Config: added 'bgscan' value 'simple:30:-80:86400'
Jul 11 16:09:30 ameni-X541UJ NetworkManager[834]: <info>  [1531321770.8192] Config: added 'key_mgmt' value 'WPA-PSK'
Jul 11 16:09:30 ameni-X541UJ NetworkManager[834]: <info>  [1531321770.8192] Config: added 'psk' value '<hidden>'
Jul 11 16:09:30 ameni-X541UJ wpa_supplicant[832]: wlp3s0: SME: Trying to authenticate with 60:83:34:c2:8d:44 (SSID='TOPNETC5D85F43' freq=2412 MHz)
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.022686] wlp3s0: authenticate with 60:83:34:c2:8d:44
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.035353] wlp3s0: send auth to 60:83:34:c2:8d:44 (try 1/3)
Jul 11 16:09:30 ameni-X541UJ NetworkManager[834]: <info>  [1531321770.8541] device (wlp3s0): supplicant interface state: ready -> authenticating
Jul 11 16:09:30 ameni-X541UJ wpa_supplicant[832]: wlp3s0: Trying to associate with 60:83:34:c2:8d:44 (SSID='TOPNETC5D85F43' freq=2412 MHz)
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.040155] wlp3s0: authenticated
Jul 11 16:09:30 ameni-X541UJ NetworkManager[834]: <info>  [1531321770.8639] device (wlp3s0): supplicant interface state: authenticating -> associating
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.042780] wlp3s0: associate with 60:83:34:c2:8d:44 (try 1/3)
Jul 11 16:09:30 ameni-X541UJ wpa_supplicant[832]: wlp3s0: Associated with 60:83:34:c2:8d:44
Jul 11 16:09:30 ameni-X541UJ wpa_supplicant[832]: wlp3s0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
Jul 11 16:09:30 ameni-X541UJ wpa_supplicant[832]: wlp3s0: CTRL-EVENT-REGDOM-CHANGE init=COUNTRY_IE type=COUNTRY alpha2=TN
Jul 11 16:09:30 ameni-X541UJ wpa_supplicant[832]: RRM: Ignoring radio measurement request: Not associated
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.047102] wlp3s0: RX AssocResp from 60:83:34:c2:8d:44 (capab=0x431 status=0 aid=1)
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.047228] wlp3s0: associated
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.047289] ath: EEPROM regdomain: 0x8314
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.047289] ath: EEPROM indicates we should expect a country code
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.047290] ath: doing EEPROM country->regdmn map search
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.047291] ath: country maps to regdmn code: 0x36
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.047292] ath: Country alpha2 being used: TN
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.047292] ath: Regpair used: 0x36
Jul 11 16:09:30 ameni-X541UJ kernel: [ 4337.047293] ath: regdomain 0x8314 dynamically updated by country IE
Jul 11 16:09:30 ameni-X541UJ NetworkManager[834]: <info>  [1531321770.8711] device (wlp3s0): supplicant interface state: associating -> associated
Jul 11 16:09:31 ameni-X541UJ chromium-browser.desktop[1888]: [1888:1888:0711/160931.149412:ERROR:gcm_channel_status_request.cc(127)] GCM channel request failed.
Jul 11 16:09:31 ameni-X541UJ NetworkManager[834]: <info>  [1531321771.2080] device (wlp3s0): supplicant interface state: associated -> 4-way handshake
Jul 11 16:09:31 ameni-X541UJ wpa_supplicant[832]: wlp3s0: WPA: Key negotiation completed with 60:83:34:c2:8d:44 [PTK=CCMP GTK=TKIP]
Jul 11 16:09:31 ameni-X541UJ wpa_supplicant[832]: wlp3s0: CTRL-EVENT-CONNECTED - Connection to 60:83:34:c2:8d:44 completed [id=0 id_str=]
Jul 11 16:09:31 ameni-X541UJ kernel: [ 4337.389955] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
Jul 11 16:09:31 ameni-X541UJ NetworkManager[834]: <info>  [1531321771.2134] device (wlp3s0): supplicant interface state: 4-way handshake -> completed
Jul 11 16:09:31 ameni-X541UJ NetworkManager[834]: <info>  [1531321771.2134] device (wlp3s0): Activation: (wifi) Stage 2 of 5 (Device Configure) successful.  Connected to wireless network 'TOPNETC5D85F43'.
Jul 11 16:09:31 ameni-X541UJ wpa_supplicant[832]: wlp3s0: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-45 noise=-81 txrate=1000
Jul 11 16:09:31 ameni-X541UJ NetworkManager[834]: <info>  [1531321771.2135] device (wlp3s0): state change: config -> ip-config (reason 'none', sys-iface-state: 'managed')
Jul 11 16:09:31 ameni-X541UJ NetworkManager[834]: <info>  [1531321771.2138] dhcp4 (wlp3s0): activation: beginning transaction (timeout in 45 seconds)
Jul 11 16:09:31 ameni-X541UJ NetworkManager[834]: <info>  [1531321771.2153] dhcp4 (wlp3s0): dhclient started with pid 4285
Jul 11 16:09:31 ameni-X541UJ dhclient[4285]: DHCPREQUEST of 192.168.1.8 on wlp3s0 to 255.255.255.255 port 67 (xid=0x28a27eb3)
Jul 11 16:09:31 ameni-X541UJ dhclient[4285]: DHCPACK of 192.168.1.8 from 192.168.1.1
Jul 11 16:09:31 ameni-X541UJ NetworkManager[834]: <info>  [1531321771.3050] dhcp4 (wlp3s0):   address 192.168.1.8
Jul 11 16:09:31 ameni-X541UJ NetworkManager[834]: <info>  [1531321771.3050] dhcp4 (wlp3s0):   plen 24 (255.255.255.0)
Jul 11 16:09:31 ameni-X541UJ NetworkManager[834]: <info>  [1531321771.3050] dhcp4 (wlp3s0):   gateway 192.168.1.1
Jul 11 16:09:31 ameni-X541UJ NetworkManager[834]: <info>  [1531321771.3050] dhcp4 (wlp3s0):   lease time 86400
Jul 11 16:09:31 ameni-X541UJ NetworkManager[834]: <info>  [1531321771.3050] dhcp4 (wlp3s0):   nameserver '192.168.1.1'
Jul 11 16:09:31 ameni-X541UJ NetworkManager[834]: <info>  [1531321771.3050] dhcp4 (wlp3s0):   nameserver '192.168.1.1'
Jul 11 16:09:31 ameni-X541UJ NetworkManager[834]: <info>  [1531321771.3050] dhcp4 (wlp3s0): state changed unknown -> bound
Jul 11 16:09:31 ameni-X541UJ avahi-daemon[818]: Joining mDNS multicast group on interface wlp3s0.IPv4 with address 192.168.1.8.
Jul 11 16:09:31 ameni-X541UJ avahi-daemon[818]: New relevant interface wlp3s0.IPv4 for mDNS.
Jul 11 16:09:31 ameni-X541UJ avahi-daemon[818]: Registering new address record for 192.168.1.8 on wlp3s0.IPv4.
Jul 11 16:09:31 ameni-X541UJ NetworkManager[834]: <info>  [1531321771.3059] device (wlp3s0): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
Jul 11 16:09:31 ameni-X541UJ NetworkManager[834]: <info>  [1531321771.3065] device (wlp3s0): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
Jul 11 16:09:31 ameni-X541UJ NetworkManager[834]: <info>  [1531321771.3067] device (wlp3s0): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
Jul 11 16:09:31 ameni-X541UJ NetworkManager[834]: <info>  [1531321771.3068] manager: NetworkManager state is now CONNECTED_LOCAL
Jul 11 16:09:31 ameni-X541UJ whoopsie[1221]: [16:09:31] Cannot reach: https://daisy.ubuntu.com
Jul 11 16:09:31 ameni-X541UJ dhclient[4285]: bound to 192.168.1.8 -- renewal in 38358 seconds.
Jul 11 16:09:31 ameni-X541UJ NetworkManager[834]: <info>  [1531321771.3548] manager: NetworkManager state is now CONNECTED_SITE
Jul 11 16:09:31 ameni-X541UJ NetworkManager[834]: <info>  [1531321771.3550] policy: set 'TOPNETC5D85F43' (wlp3s0) as default for IPv4 routing and DNS
Jul 11 16:09:31 ameni-X541UJ NetworkManager[834]: <info>  [1531321771.3553] device (wlp3s0): Activation: successful, device activated.
Jul 11 16:09:31 ameni-X541UJ nm-dispatcher: req:3 'up' [wlp3s0]: new request (1 scripts)
Jul 11 16:09:31 ameni-X541UJ nm-dispatcher: req:3 'up' [wlp3s0]: start running ordered scripts...
Jul 11 16:09:31 ameni-X541UJ gsd-sharing[1722]: Failed to StopUnit service: GDBus.Error:org.freedesktop.systemd1.NoSuchUnit: Unit rygel.service not loaded.
Jul 11 16:09:31 ameni-X541UJ gsd-sharing[1722]: Failed to StopUnit service: GDBus.Error:org.freedesktop.systemd1.NoSuchUnit: Unit gnome-remote-desktop.service not loaded.
Jul 11 16:09:31 ameni-X541UJ systemd-resolved[807]: Using degraded feature set (UDP) for DNS server 192.168.1.1.
Jul 11 16:09:32 ameni-X541UJ avahi-daemon[818]: Joining mDNS multicast group on interface wlp3s0.IPv6 with address fe80::b233:75f1:ea7f:1f89.
Jul 11 16:09:32 ameni-X541UJ avahi-daemon[818]: New relevant interface wlp3s0.IPv6 for mDNS.
Jul 11 16:09:32 ameni-X541UJ avahi-daemon[818]: Registering new address record for fe80::b233:75f1:ea7f:1f89 on wlp3s0.*.
Jul 11 16:09:34 ameni-X541UJ avahi-daemon[818]: Leaving mDNS multicast group on interface wlp3s0.IPv6 with address fe80::b233:75f1:ea7f:1f89.
Jul 11 16:09:34 ameni-X541UJ avahi-daemon[818]: Joining mDNS multicast group on interface wlp3s0.IPv6 with address fd60:8334:c28d:3e00:cd7a:7ae2:68dc:f50e.
Jul 11 16:09:34 ameni-X541UJ avahi-daemon[818]: Registering new address record for fd60:8334:c28d:3e00:cd7a:7ae2:68dc:f50e on wlp3s0.*.
Jul 11 16:09:34 ameni-X541UJ avahi-daemon[818]: Withdrawing address record for fe80::b233:75f1:ea7f:1f89 on wlp3s0.
Jul 11 16:09:35 ameni-X541UJ avahi-daemon[818]: Registering new address record for fd60:8334:c28d:3e00:5b18:c9a8:9cd:54d1 on wlp3s0.*.
Jul 11 16:09:43 ameni-X541UJ NetworkManager[834]: <info>  [1531321783.6707] manager: NetworkManager state is now CONNECTED_GLOBAL
Jul 11 16:09:43 ameni-X541UJ dbus-daemon[828]: [system] Activating via systemd: service name='org.freedesktop.nm_dispatcher' unit='dbus-org.freedesktop.nm-dispatcher.service' requested by ':1.14' (uid=0 pid=834 comm="/usr/sbin/NetworkManager --no-daemon " label="unconfined")
Jul 11 16:09:43 ameni-X541UJ systemd[1]: Starting Network Manager Script Dispatcher Service...
Jul 11 16:09:43 ameni-X541UJ whoopsie[1221]: [16:09:43] The default IPv4 route is: /org/freedesktop/NetworkManager/ActiveConnection/4
Jul 11 16:09:43 ameni-X541UJ whoopsie[1221]: [16:09:43] Not a paid data plan: /org/freedesktop/NetworkManager/ActiveConnection/4
Jul 11 16:09:43 ameni-X541UJ whoopsie[1221]: [16:09:43] Found usable connection: /org/freedesktop/NetworkManager/ActiveConnection/4
Jul 11 16:09:43 ameni-X541UJ dbus-daemon[828]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jul 11 16:09:43 ameni-X541UJ systemd[1]: Started Network Manager Script Dispatcher Service.
Jul 11 16:09:43 ameni-X541UJ nm-dispatcher: req:1 'connectivity-change': new request (1 scripts)
Jul 11 16:09:43 ameni-X541UJ nm-dispatcher: req:1 'connectivity-change': start running ordered scripts...
Jul 11 16:09:45 ameni-X541UJ whoopsie[1221]: [16:09:45] online
Jul 11 16:10:38 ameni-X541UJ chromium-browser.desktop[1888]: [WARNING:flash/platform/pepper/pep_module.cpp(63)] SANDBOXED
Jul 11 16:10:56 ameni-X541UJ kernel: [ 4422.459314] ath: phy0: Could not kill baseband RX
Jul 11 16:12:51 ameni-X541UJ kernel: [ 4537.373055] ath: phy0: Could not kill baseband RX
Jul 11 16:13:09 ameni-X541UJ wpa_supplicant[832]: wlp3s0: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-38 noise=-81 txrate=1000
Jul 11 16:13:53 ameni-X541UJ wpa_supplicant[832]: wlp3s0: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-33 noise=-79 txrate=121500
Jul 11 16:14:52 ameni-X541UJ wpa_supplicant[832]: wlp3s0: CTRL-EVENT-DISCONNECTED bssid=60:83:34:c2:8d:44 reason=4 locally_generated=1
Jul 11 16:14:52 ameni-X541UJ NetworkManager[834]: <warn>  [1531322092.7723] sup-iface[0x56219bf35190,wlp3s0]: connection disconnected (reason -4)
Jul 11 16:14:52 ameni-X541UJ wpa_supplicant[832]: wlp3s0: CTRL-EVENT-REGDOM-CHANGE init=CORE type=WORLD
Jul 11 16:14:52 ameni-X541UJ NetworkManager[834]: <info>  [1531322092.8081] device (wlp3s0): supplicant interface state: completed -> disconnected
Jul 11 16:14:52 ameni-X541UJ NetworkManager[834]: <info>  [1531322092.8803] device (wlp3s0): supplicant interface state: disconnected -> scanning
Jul 11 16:14:53 ameni-X541UJ chromium-browser.desktop[1888]: [1888:1980:0711/161453.221827:ERROR:connection_factory_impl.cc(416)] Failed to connect to MCS endpoint with error -106
Jul 11 16:14:53 ameni-X541UJ wpa_supplicant[832]: wlp3s0: SME: Trying to authenticate with 60:83:34:c2:8d:44 (SSID='TOPNETC5D85F43' freq=2412 MHz)
Jul 11 16:14:53 ameni-X541UJ kernel: [ 4659.988352] wlp3s0: authenticate with 60:83:34:c2:8d:44
Jul 11 16:14:53 ameni-X541UJ kernel: [ 4660.006090] wlp3s0: send auth to 60:83:34:c2:8d:44 (try 1/3)
Jul 11 16:14:53 ameni-X541UJ NetworkManager[834]: <info>  [1531322093.8337] device (wlp3s0): supplicant interface state: scanning -> authenticating
Jul 11 16:14:53 ameni-X541UJ wpa_supplicant[832]: wlp3s0: Trying to associate with 60:83:34:c2:8d:44 (SSID='TOPNETC5D85F43' freq=2412 MHz)
Jul 11 16:14:53 ameni-X541UJ kernel: [ 4660.013440] wlp3s0: authenticated
Jul 11 16:14:53 ameni-X541UJ NetworkManager[834]: <info>  [1531322093.8481] device (wlp3s0): supplicant interface state: authenticating -> associating
Jul 11 16:14:53 ameni-X541UJ kernel: [ 4660.018891] wlp3s0: associate with 60:83:34:c2:8d:44 (try 1/3)
Jul 11 16:14:54 ameni-X541UJ kernel: [ 4660.442939] wlp3s0: associate with 60:83:34:c2:8d:44 (try 2/3)
Jul 11 16:14:54 ameni-X541UJ wpa_supplicant[832]: wlp3s0: Associated with 60:83:34:c2:8d:44
Jul 11 16:14:54 ameni-X541UJ wpa_supplicant[832]: wlp3s0: CTRL-EVENT-SUBNET-STATUS-UPDATE status=0
Jul 11 16:14:54 ameni-X541UJ wpa_supplicant[832]: RRM: Ignoring radio measurement request: Not associated
Jul 11 16:14:54 ameni-X541UJ wpa_supplicant[832]: wlp3s0: CTRL-EVENT-REGDOM-CHANGE init=COUNTRY_IE type=COUNTRY alpha2=TN
Jul 11 16:14:54 ameni-X541UJ kernel: [ 4660.539143] wlp3s0: RX AssocResp from 60:83:34:c2:8d:44 (capab=0x431 status=0 aid=1)
Jul 11 16:14:54 ameni-X541UJ kernel: [ 4660.539327] wlp3s0: associated
Jul 11 16:14:54 ameni-X541UJ kernel: [ 4660.539586] ath: EEPROM regdomain: 0x8314
Jul 11 16:14:54 ameni-X541UJ kernel: [ 4660.539589] ath: EEPROM indicates we should expect a country code
Jul 11 16:14:54 ameni-X541UJ kernel: [ 4660.539592] ath: doing EEPROM country->regdmn map search
Jul 11 16:14:54 ameni-X541UJ kernel: [ 4660.539596] ath: country maps to regdmn code: 0x36
Jul 11 16:14:54 ameni-X541UJ kernel: [ 4660.539599] ath: Country alpha2 being used: TN
Jul 11 16:14:54 ameni-X541UJ kernel: [ 4660.539601] ath: Regpair used: 0x36
Jul 11 16:14:54 ameni-X541UJ kernel: [ 4660.539605] ath: regdomain 0x8314 dynamically updated by country IE
Jul 11 16:14:54 ameni-X541UJ wpa_supplicant[832]: RRM: Ignoring radio measurement request: Not associated
Jul 11 16:14:54 ameni-X541UJ NetworkManager[834]: <info>  [1531322094.3723] device (wlp3s0): supplicant interface state: associating -> associated
Jul 11 16:14:55 ameni-X541UJ NetworkManager[834]: <info>  [1531322095.2188] device (wlp3s0): supplicant interface state: associated -> 4-way handshake
Jul 11 16:14:55 ameni-X541UJ wpa_supplicant[832]: wlp3s0: WPA: Key negotiation completed with 60:83:34:c2:8d:44 [PTK=CCMP GTK=TKIP]
Jul 11 16:14:55 ameni-X541UJ wpa_supplicant[832]: wlp3s0: CTRL-EVENT-CONNECTED - Connection to 60:83:34:c2:8d:44 completed [id=0 id_str=]
Jul 11 16:14:55 ameni-X541UJ NetworkManager[834]: <info>  [1531322095.2359] device (wlp3s0): supplicant interface state: 4-way handshake -> completed
Jul 11 16:14:55 ameni-X541UJ wpa_supplicant[832]: wlp3s0: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-46 noise=-81 txrate=6500
Jul 11 16:15:32 ameni-X541UJ kernel: [ 4698.740923] ath: phy0: Could not kill baseband RX
Jul 11 16:16:42 ameni-X541UJ kernel: [ 4768.756732] asus_wmi: Unknown key cf pressed
Jul 11 16:16:42 ameni-X541UJ kernel: [ 4768.864718] acpi INT3400:00: Unsupported event [0x86]
Jul 11 16:16:42 ameni-X541UJ pulseaudio[1259]: W: [pulseaudio] sink-input.c: Failed to create sink input: sink is suspended.
Jul 11 16:16:42 ameni-X541UJ org.gnome.Shell.desktop[1611]: Window manager warning: last_focus_time (4769515) is greater than comparison timestamp (4769192).  This most likely represents a buggy client sending inaccurate timestamps in messages such as _NET_ACTIVE_WINDOW.  Trying to work around...
Jul 11 16:16:47 ameni-X541UJ wpa_supplicant[832]: wlp3s0: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-34 noise=-81 txrate=135000
Jul 11 16:17:01 ameni-X541UJ CRON[4533]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
Jul 11 16:17:19 ameni-X541UJ systemd-resolved[807]: Using degraded feature set (UDP) for DNS server 192.168.1.1.
Jul 11 16:18:18 ameni-X541UJ wpa_supplicant[832]: wlp3s0: CTRL-EVENT-SIGNAL-CHANGE above=0 signal=-84 noise=-82 txrate=135000
Jul 11 16:18:21 ameni-X541UJ wpa_supplicant[832]: wlp3s0: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-40 noise=-82 txrate=1000
Jul 11 16:18:21 ameni-X541UJ wpa_supplicant[832]: message repeated 5 times: [ wlp3s0: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-40 noise=-82 txrate=1000]
Jul 11 16:18:33 ameni-X541UJ wpa_supplicant[832]: wlp3s0: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-39 noise=-80 txrate=1000
Jul 11 16:19:44 ameni-X541UJ kernel: [ 4950.791622] ath: phy0: Could not kill baseband RX
Jul 11 16:20:39 ameni-X541UJ kernel: [ 5005.861211] ath: phy0: Could not kill baseband RX
Jul 11 16:22:50 ameni-X541UJ kernel: [ 5136.197293] perf: interrupt took too long (2519 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
Jul 11 16:23:26 ameni-X541UJ kernel: [ 5172.717273] ath: phy0: Could not kill baseband RX
Jul 11 16:26:28 ameni-X541UJ dbus-daemon[828]: [system] Activating service name='org.debian.apt' requested by ':1.138' (uid=1000 pid=4793 comm="/usr/bin/python3 /usr/bin/update-manager " label="unconfined") (using servicehelper)
Jul 11 16:26:29 ameni-X541UJ AptDaemon: INFO: Initializing daemon
Jul 11 16:26:29 ameni-X541UJ org.debian.apt[828]: 16:26:29 AptDaemon [INFO]: Initializing daemon
Jul 11 16:26:29 ameni-X541UJ dbus-daemon[828]: [system] Successfully activated service 'org.debian.apt'
Jul 11 16:26:29 ameni-X541UJ AptDaemon: INFO: UpdateCache() was called
Jul 11 16:26:29 ameni-X541UJ org.debian.apt[828]: /usr/lib/python3/dist-packages/aptdaemon/worker/pkworker.py:35: PyGIWarning: PackageKitGlib was imported without specifying a version first. Use gi.require_version('PackageKitGlib', '1.0') before import to ensure that the right version gets loaded.
Jul 11 16:26:29 ameni-X541UJ org.debian.apt[828]:   from gi.repository import PackageKitGlib as pk
Jul 11 16:26:29 ameni-X541UJ org.debian.apt[828]: 16:26:29 AptDaemon [INFO]: UpdateCache() was called
Jul 11 16:26:30 ameni-X541UJ AptDaemon.Trans: INFO: Queuing transaction /org/debian/apt/transaction/c9da95ebee89460ca344c506296c79e6
Jul 11 16:26:30 ameni-X541UJ org.debian.apt[828]: 16:26:30 AptDaemon.Trans [INFO]: Queuing transaction /org/debian/apt/transaction/c9da95ebee89460ca344c506296c79e6
Jul 11 16:26:30 ameni-X541UJ AptDaemon.Worker: INFO: Simulating trans: /org/debian/apt/transaction/c9da95ebee89460ca344c506296c79e6
Jul 11 16:26:30 ameni-X541UJ org.debian.apt[828]: 16:26:30 AptDaemon.Worker [INFO]: Simulating trans: /org/debian/apt/transaction/c9da95ebee89460ca344c506296c79e6
Jul 11 16:26:30 ameni-X541UJ AptDaemon.Worker: INFO: Processing transaction /org/debian/apt/transaction/c9da95ebee89460ca344c506296c79e6
Jul 11 16:26:30 ameni-X541UJ org.debian.apt[828]: 16:26:30 AptDaemon.Worker [INFO]: Processing transaction /org/debian/apt/transaction/c9da95ebee89460ca344c506296c79e6
Jul 11 16:26:30 ameni-X541UJ AptDaemon.Worker: INFO: Updating cache
Jul 11 16:26:30 ameni-X541UJ org.debian.apt[828]: 16:26:30 AptDaemon.Worker [INFO]: Updating cache
Jul 11 16:26:56 ameni-X541UJ gnome-software[1835]: Only 0 apps for recent list, hiding
Jul 11 16:26:59 ameni-X541UJ AptDaemon.Worker: INFO: Finished transaction /org/debian/apt/transaction/c9da95ebee89460ca344c506296c79e6
Jul 11 16:26:59 ameni-X541UJ org.debian.apt[828]: 16:26:59 AptDaemon.Worker [INFO]: Finished transaction /org/debian/apt/transaction/c9da95ebee89460ca344c506296c79e6
Jul 11 16:27:15 ameni-X541UJ gnome-software[1835]: tried overwriting winds key GnomeSoftware::FeatureTile-css from border-color: #000000;#012text-shadow: 0 1px 1px rgba(255,255,255,0.5);#012color: #000000;#012outline-offset: 0;#012outline-color: alpha(#ffffff, 0.75);#012outline-style: dashed;#012outline-offset: 2px;#012background: url('/home/ameni/.cache/gnome-software/cssresource/fb4946f263c29221aef8bdcdd5aaeb600695e89a-icon_1_256x256.png') left center / auto 100% no-repeat, url('/home/ameni/.cache/gnome-software/cssresource/c29f384d50e91516f8ff167631cd022fad94065f-banner.png') center / cover no-repeat;; to border-color: #000000;#012text-shadow: 0 1px 1px rgba(255,255,255,0.5);#012color: #000000;#012outline-offset: 0;#012outline-color: alpha(#ffffff, 0.75);#012outline-style: dashed;#012outline-offset: 2px;#012background: url('https://dashboard.snapcraft.io/site_media/appmedia/2018/07/icon_1_256x256.png') left center / auto 100% no-repeat, url('https://dashboard.snapcraft.io/site_media/appmedia/2018/06/banner.png') center / cover no-repeat;;
Jul 11 16:27:18 ameni-X541UJ PackageKit: search-file transaction /2172_acdaeeea from uid 1000 finished with success after 21740ms
Jul 11 16:27:19 ameni-X541UJ PackageKit: search-file transaction /2173_acbbbebe from uid 1000 finished with success after 624ms
Jul 11 16:27:19 ameni-X541UJ PackageKit: search-file transaction /2174_eacadcea from uid 1000 finished with success after 555ms
Jul 11 16:27:20 ameni-X541UJ PackageKit: search-file transaction /2175_cababcbb from uid 1000 finished with success after 516ms
Jul 11 16:27:21 ameni-X541UJ PackageKit: search-file transaction /2176_edabcdbd from uid 1000 finished with success after 516ms
Jul 11 16:27:21 ameni-X541UJ PackageKit: search-file transaction /2177_cbeccacb from uid 1000 finished with success after 517ms
Jul 11 16:27:22 ameni-X541UJ PackageKit: search-file transaction /2178_abecdbbb from uid 1000 finished with success after 516ms
Jul 11 16:27:22 ameni-X541UJ PackageKit: search-file transaction /2179_daeedabd from uid 1000 finished with success after 514ms
Jul 11 16:27:23 ameni-X541UJ PackageKit: get-details transaction /2180_eccceceb from uid 1000 finished with success after 450ms
Jul 11 16:29:32 ameni-X541UJ gnome-shell[1611]: Some code accessed the property 'refreshPropertyOnProxy' on the module 'util'. That property was defined with 'let' or 'const' inside the module. This was previously supported, but is not correct according to the ES6 standard. Any symbols to be exported from a module must be defined with 'var'. The property access will work as previously for the time being, but please fix your code anyway.
Jul 11 16:34:36 ameni-X541UJ dbus-daemon[1442]: [session uid=1000 pid=1442] Activating via systemd: service name='org.gnome.Terminal' unit='gnome-terminal-server.service' requested by ':1.108' (uid=1000 pid=5555 comm="/usr/bin/gnome-terminal.real " label="unconfined")
Jul 11 16:34:36 ameni-X541UJ systemd[1415]: Starting GNOME Terminal Server...
Jul 11 16:34:36 ameni-X541UJ dbus-daemon[1442]: [session uid=1000 pid=1442] Successfully activated service 'org.gnome.Terminal'
Jul 11 16:34:36 ameni-X541UJ systemd[1415]: Started GNOME Terminal Server.

Hors ligne

#49 Le 11/07/2018, à 17:56

NicoApi73

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

là, je suis en limite de compétence. Il y a bien des choses qui me surprennent, mais je ne sais pas si c'est le problème ou pas. J'essaie d'investiguer plus ce soir.

Hors ligne

#50 Le 11/07/2018, à 18:01

ameni.issaoui

Re : ubuntu 18.04 . le pc n'éteint pas correctement [RESOLU]

ok merci mais ce que je connais que ça apparue lorsque j'ai installer driver nVidia   
cordialement

Hors ligne

Pages : 1 2 3