Contenu | Rechercher | Menus

Annonce

T-shirt Seiche Cosmic, Série limitée

L'équipe des administrateurs et modérateurs du forum vous invite à prendre connaissance des nouvelles règles.
En cas de besoin, vous pouvez intervenir dans cette discussion.

Ubuntu 18.10
T-shirt Ubuntu-FR « Seiche Cosmique » en série limitée ! Prix spécial pré-vente (15€) jusqu'au 4 novembre 2018.

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 10/08/2018, à 15:27

matamore

Ubuntu 18.04 - imprimante Lexmark Pro704 - en USB - acces denied

Bonjour.
Sous Ubuntu 16.04, l'impression avec Lexmark Pro704 fonctionnne sans souci après avoir suivi les instructions d'installation (https://doc.ubuntu-fr.org/tutoriel/inst … te_lexmark), en particulier celles concernant les droits d'accès (cf. 6.2).
Sous Ubuntu 18.04.1, j'ai installé de la même façon l'imprimante.
Pour une imprimante ajoutée via cups : impression nulle se terminant par rendering completed, pas d'erreur dans le log file : [job 12] (null).
Pour une imprimante ajoutée par gestion imprimante (ubuntu) : [job 14] job stopped due to filter errors.

Contenu du cups/error_log :

E [10/Aug/2018:14:34:58 +0200] [Job 10] (null)
E [10/Aug/2018:14:38:56 +0200] [Job 11] (null)
E [10/Aug/2018:14:45:05 +0200] [cups-deviced] PID 934 (gutenprint52+usb) stopped with status 1!
E [10/Aug/2018:14:45:05 +0200] [cups-deviced] PID 932 (lxusb) stopped with status 127!
E [10/Aug/2018:14:45:07 +0200] [Client 12] Returning IPP client-error-bad-request for CUPS-Add-Modify-Printer (ipp://localhost:631/printers/Lexmark_Pro700_Series_PC_Bureau) from localhost
E [10/Aug/2018:14:49:49 +0200] [Job 12] (null)
E [10/Aug/2018:14:51:30 +0200] [cups-deviced] PID 1969 (lxusb) stopped with status 127!
E [10/Aug/2018:14:51:30 +0200] [cups-deviced] PID 1973 (gutenprint52+usb) stopped with status 1!
W [10/Aug/2018:14:52:50 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Lexmark_Lexmark_Pro700_Series_usb2-Gray..\' already exists
W [10/Aug/2018:14:52:50 +0200] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Lexmark_Lexmark_Pro700_Series_usb2-RGB..\' already exists
E [10/Aug/2018:14:54:57 +0200] [cups-deviced] PID 2250 (lxusb) stopped with status 127!
E [10/Aug/2018:14:54:57 +0200] [cups-deviced] PID 2253 (gutenprint52+usb) stopped with status 1!
E [10/Aug/2018:14:55:51 +0200] [cups-deviced] PID 2363 (lxusb) stopped with status 127!
E [10/Aug/2018:14:55:51 +0200] [cups-deviced] PID 2366 (gutenprint52+usb) stopped with status 1!
E [10/Aug/2018:14:56:41 +0200] [Job 14] Job stopped due to filter errors; please consult the error_log file for details.
D [10/Aug/2018:14:56:41 +0200] [Job 14] The following messages were recorded from 14:56:27 to 14:56:41
D [10/Aug/2018:14:56:41 +0200] [Job 14] Applying default options...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Adding start banner page "none".
D [10/Aug/2018:14:56:41 +0200] [Job 14] Queued on "Pro700-2" by "psychopathe".
D [10/Aug/2018:14:56:41 +0200] [Job 14] Auto-typing file...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Request file type is application/pdf.
D [10/Aug/2018:14:56:41 +0200] [Job 14] File of type application/pdf queued by "psychopathe".
D [10/Aug/2018:14:56:41 +0200] [Job 14] Adding end banner page "none".
D [10/Aug/2018:14:56:41 +0200] [Job 14] time-at-processing=1533905787
D [10/Aug/2018:14:56:41 +0200] [Job 14] 3 filters for job:
D [10/Aug/2018:14:56:41 +0200] [Job 14] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [10/Aug/2018:14:56:41 +0200] [Job 14] gstoraster (application/vnd.cups-pdf to application/vnd.cups-raster, cost 99)
D [10/Aug/2018:14:56:41 +0200] [Job 14] /usr/local/lexmark/v3/bin/printfilter (application/vnd.cups-raster to printer/Pro700-2, cost 0)
D [10/Aug/2018:14:56:41 +0200] [Job 14] job-sheets=none,none
D [10/Aug/2018:14:56:41 +0200] [Job 14] argv[0]="Pro700-2"
D [10/Aug/2018:14:56:41 +0200] [Job 14] argv[1]="14"
D [10/Aug/2018:14:56:41 +0200] [Job 14] argv[2]="psychopathe"
D [10/Aug/2018:14:56:41 +0200] [Job 14] argv[3]="Sans nom 1"
D [10/Aug/2018:14:56:41 +0200] [Job 14] argv[4]="1"
D [10/Aug/2018:14:56:41 +0200] [Job 14] argv[5]="PageSize=A4 job-uuid=urn:uuid:0a2c8189-a46f-3ab0-4cd1-0143e81f89fd job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1533905787 time-at-processing=1533905787 document-name-supplied=PKJbYA"
D [10/Aug/2018:14:56:41 +0200] [Job 14] argv[6]="/var/spool/cups/d00014-001"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc-root"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[7]="CUPS_STATEDIR=/run/cups"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[8]="HOME=/var/spool/cups/tmp"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[10]="SERVER_ADMIN=root@LapBen"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[11]="SOFTWARE=CUPS/2.2.7"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[13]="USER=root"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[14]="CUPS_MAX_MESSAGE=2047"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[15]="CUPS_SERVER=/run/cups/cups.sock"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[17]="IPP_PORT=631"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[18]="CHARSET=utf-8"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[19]="LANG=fr_BE.UTF-8"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[20]="PPD=/etc/cups/ppd/Pro700-2.ppd"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[21]="RIP_MAX_CACHE=128m"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[22]="CONTENT_TYPE=application/pdf"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[23]="DEVICE_URI=usb://Lexmark/Pro700%20Series?serial=90T7146M535034G&interface=1"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[24]="PRINTER_INFO=Lexmark Pro700 Series"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[25]="PRINTER_LOCATION="
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[26]="PRINTER=Pro700-2"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[27]="PRINTER_STATE_REASONS=none"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[28]="CUPS_FILETYPE=document"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[29]="FINAL_CONTENT_TYPE=application/vnd.cups-raster"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[30]="AUTH_I****"
D [10/Aug/2018:14:56:41 +0200] [Job 14] Started filter /usr/lib/cups/filter/pdftopdf (PID 2388)
D [10/Aug/2018:14:56:41 +0200] [Job 14] Started filter /usr/lib/cups/filter/gstoraster (PID 2389)
D [10/Aug/2018:14:56:41 +0200] [Job 14] Started filter /usr/local/lexmark/v3/bin/printfilter (PID 2390)
D [10/Aug/2018:14:56:41 +0200] [Job 14] Started backend /usr/lib/cups/backend/usb (PID 2391)
D [10/Aug/2018:14:56:41 +0200] [Job 14] OUTFORMAT=\"(null)\", so output format will be CUPS/PWG Raster
D [10/Aug/2018:14:56:41 +0200] [Job 14] pdftopdf: Last filter determined by the PPD: printfilter; FINAL_CONTENT_TYPE: application/vnd.cups-raster => pdftopdf will not log pages in page_log.
D [10/Aug/2018:14:56:41 +0200] [Job 14] PID 2388 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [10/Aug/2018:14:56:41 +0200] [Job 14] Color Manager: Calibration Mode/Off
D [10/Aug/2018:14:56:41 +0200] [Job 14] Calling FindDeviceById(cups-Pro700-2)
D [10/Aug/2018:14:56:41 +0200] [Job 14] Found device /org/freedesktop/ColorManager/devices/cups_Pro700_2
D [10/Aug/2018:14:56:41 +0200] [Job 14] Calling org.freedesktop.ColorManager.Device.Get(ProfilingInhibitors)
D [10/Aug/2018:14:56:41 +0200] [Job 14] Calling FindDeviceById(cups-Pro700-2)
D [10/Aug/2018:14:56:41 +0200] [Job 14] Found device /org/freedesktop/ColorManager/devices/cups_Pro700_2
D [10/Aug/2018:14:56:41 +0200] [Job 14] Calling GetProfileForQualifiers(AllColors.Automatic....)
D [10/Aug/2018:14:56:41 +0200] [Job 14] Found profile /org/freedesktop/ColorManager/profiles/Pro700_2_RGB__
D [10/Aug/2018:14:56:41 +0200] [Job 14] Calling org.freedesktop.ColorManager.Profile.Get(Filename)
D [10/Aug/2018:14:56:41 +0200] [Job 14] Use profile filename: \'\'
D [10/Aug/2018:14:56:41 +0200] [Job 14] Color Manager: ICC Profile: 
D [10/Aug/2018:14:56:41 +0200] [Job 14] Ghostscript using Any-Part-of-Pixel method to fill paths.
D [10/Aug/2018:14:56:41 +0200] [Job 14] Ghostscript command line: gs -dQUIET -dPARANOIDSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -dNOMEDIAATTRS -dShowAcroForm -sstdout=%stderr -sOutputFile=%stdout -sDEVICE=cups -sOutputType=5 -r600x600 -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=841 -dcupsBitsPerColor=8 -dcupsColorOrder=0 -dcupsColorSpace=1 -dcupsCompression=8 -dcupsRowFeed=4 -dcupsRowStep=1 -scupsPageSizeName=A4 -I/usr/share/cups/fonts -c \'<</.HWMargins[9.600000 36.000000 9.599976 4.799988] /Margins[0 0]>>setpagedevice\' -f -_
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[0]=\"CUPS_CACHEDIR=/var/cache/cups\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[1]=\"CUPS_DATADIR=/usr/share/cups\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[2]=\"CUPS_DOCROOT=/usr/share/cups/doc-root\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[3]=\"CUPS_FONTPATH=/usr/share/cups/fonts\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[4]=\"CUPS_REQUESTROOT=/var/spool/cups\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[5]=\"CUPS_SERVERBIN=/usr/lib/cups\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[6]=\"CUPS_SERVERROOT=/etc/cups\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[7]=\"CUPS_STATEDIR=/run/cups\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[8]=\"HOME=/var/spool/cups/tmp\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[9]=\"PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[10]=\"SERVER_ADMIN=root@LapBen\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[11]=\"SOFTWARE=CUPS/2.2.7\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[12]=\"TMPDIR=/var/spool/cups/tmp\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[13]=\"USER=root\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[14]=\"CUPS_MAX_MESSAGE=2047\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[15]=\"CUPS_SERVER=/run/cups/cups.sock\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[16]=\"CUPS_ENCRYPTION=IfRequested\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[17]=\"IPP_PORT=631\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[18]=\"CHARSET=utf-8\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[19]=\"LANG=fr_BE.UTF-8\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[20]=\"PPD=/etc/cups/ppd/Pro700-2.ppd\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[21]=\"RIP_MAX_CACHE=128m\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[22]=\"CONTENT_TYPE=application/pdf\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[23]=\"DEVICE_URI=usb://Lexmark/Pro700%20Series?serial=90T7146M535034G&interface=1\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[24]=\"PRINTER_INFO=Lexmark Pro700 Series\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[25]=\"PRINTER_LOCATION=\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[26]=\"PRINTER=Pro700-2\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[27]=\"PRINTER_STATE_REASONS=none\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[28]=\"CUPS_FILETYPE=document\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[29]=\"FINAL_CONTENT_TYPE=application/vnd.cups-raster\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] envp[30]=\"AUTH_INFO_REQUIRED=none\"
D [10/Aug/2018:14:56:41 +0200] [Job 14] Loading USB quirks from \"/usr/share/cups/usb\".
D [10/Aug/2018:14:56:41 +0200] [Job 14] Loaded 159 quirks.
D [10/Aug/2018:14:56:41 +0200] [Job 14] Printing on printer with URI: usb://Lexmark/Pro700%20Series?serial=90T7146M535034G&interface=1
D [10/Aug/2018:14:56:41 +0200] [Job 14] libusb_get_device_list=13
D [10/Aug/2018:14:56:41 +0200] [Job 14] STATE: +connecting-to-device
D [10/Aug/2018:14:56:41 +0200] [Job 14] STATE: -connecting-to-device
D [10/Aug/2018:14:56:41 +0200] [Job 14] Printer found with device ID: MFG:Lexmark;CMD:CPDNPA004;MODEL:Pro700 Series;CLASS:Printer;DES:Lexmark Pro700 Series; Device URI: usb://Lexmark/Pro700%20Series?serial=90T7146M535034G&interface=1
D [10/Aug/2018:14:56:41 +0200] [Job 14] Device protocol: 2
D [10/Aug/2018:14:56:41 +0200] [Job 14] Sending data to printer.
D [10/Aug/2018:14:56:41 +0200] [Job 14] Set job-printer-state-message to "Sending data to printer.", current level=INFO
D [10/Aug/2018:14:56:41 +0200] [Job 14] Start rendering...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Set job-printer-state-message to "Start rendering...", current level=INFO
D [10/Aug/2018:14:56:41 +0200] [Job 14] Processing page 1...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Set job-printer-state-message to "Processing page 1...", current level=INFO
D [10/Aug/2018:14:56:41 +0200] [Job 14] Read 8 bytes of print data...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Wrote 8 bytes of print data...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Read 512 bytes of back-channel data...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Read 420 bytes of back-channel data...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Read 9 bytes of print data...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Wrote 9 bytes of print data...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Read 9 bytes of back-channel data...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Read 8 bytes of print data...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Wrote 8 bytes of print data...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Read 512 bytes of back-channel data...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Read 420 bytes of back-channel data...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Read 10 bytes of print data...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Wrote 10 bytes of print data...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Read 6 bytes of back-channel data...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Read 10 bytes of print data...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Wrote 10 bytes of print data...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Read 6 bytes of back-channel data...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Sent 45 bytes...
D [10/Aug/2018:14:56:41 +0200] [Job 14] PID 2390 (/usr/local/lexmark/v3/bin/printfilter) crashed on signal 11.
D [10/Aug/2018:14:56:41 +0200] [Job 14] Hint: Try setting the LogLevel to "debug" to find out more.
D [10/Aug/2018:14:56:41 +0200] [Job 14] Processing page 2...
D [10/Aug/2018:14:56:41 +0200] [Job 14] Rendering completed
D [10/Aug/2018:14:56:41 +0200] [Job 14] Waiting for read thread to exit...
D [10/Aug/2018:14:56:41 +0200] [Job 14] PID 2389 (/usr/lib/cups/filter/gstoraster) exited with no errors.
D [10/Aug/2018:14:56:41 +0200] [Job 14] Read thread still active, aborting the pending read...
D [10/Aug/2018:14:56:41 +0200] [Job 14] PID 2391 (/usr/lib/cups/backend/usb) exited with no errors.
D [10/Aug/2018:14:56:41 +0200] [Job 14] End of messages
D [10/Aug/2018:14:56:41 +0200] [Job 14] printer-state=3(idle)
D [10/Aug/2018:14:56:41 +0200] [Job 14] printer-state-message="Rendering completed"
D [10/Aug/2018:14:56:41 +0200] [Job 14] printer-state-reasons=none
E [10/Aug/2018:14:57:47 +0200] [Job 13] (null)

:-)
Mat


Modération : merci d'utiliser les balises code (explications ici).

Dernière modification par cqfd93 (Le 10/08/2018, à 17:24)

Hors ligne

#2 Le 13/08/2018, à 12:15

matamore

Re : Ubuntu 18.04 - imprimante Lexmark Pro704 - en USB - acces denied

Les commandes supplémentaires que j'ai exécutées pour finaliser l'installation de l'imprimante sont :

sudo chmod 755 /usr/local/lexmark/v3/bin/printfilter
sudo chgrp bin /usr/local/lexmark/v3/bin/printfilter

extraites de la page : https://doc.ubuntu-fr.org/tutoriel/inst … te_lexmark.
Ces 2 commandes furent efficaces (c-à-d permirent l'impression ultérieure de documents) pour la version 16.04 mais non efficaces (elles ont été acceptées par le SO mais ne permettent pas l'impression) pour la version 18.04.
Le fichier log fourni est celui extrait de la version 18.04 pour tenter de comprendre ce qui se passe, si les messages transcrits permettent de comprendre pourquoi l'impression n'aboutit pas à l'imprimante.
J'espère avoir suffisamment complété mes explications en utilisant les balises codes.
Cordialement,
Mat

Hors ligne