Pages : 1
#1 Le 27/09/2008, à 11:29
- siick
Bureau qui ne répond plus!!!
Bonjour à tous! 
Voilà mon petit problème.
Tout commence donc hier. Je me lève heureux car je sais qu'aujourd'hui je vais acheter mon nouvel écran! Je cours chez mon dealer de matos et achète un écran 22" . Retour à la maison au pas de course, branchement, configuration avec mon autre écran afin de profiter du 'Dualview', essai, fonctionnement ok! J'ai donc un 22" et un 17", l'image est ok, tout fonctionne parfaitement bien sauf.......mon bureau et les icones. Je m'explique.
Mon bureau a perdu sa réactivité, quand je change l'arrière plan rien ne se passe, quand je déplace un icône, rien ne se passe................... sauf je tue X par un Ctrl+Alt+Backspace. Je me relogue puis tout est ok, mon image d'arrière plan est changé et mon icône déplacé.
J'aimerais donc pouvoir changer mon arrière-plan ou déplacer un icône sans redémarrer X à chaque fois.
Merci d'avance 
.
Siick d(o-0)b
Cliketi Free Netlabel
Xubuntu 16.04
Hors ligne
#2 Le 27/09/2008, à 20:42
- nwarrenfl
Re : Bureau qui ne répond plus!!!
C'est assez bizarre!
Tu peux essayer de supprimer les dossiers de configuration .gnome, .gnome2 et .gconf dans ton dossier personnel.
Cela effacera la configuration générale de gnome...
Dernière modification par nwarrenfl (Le 27/09/2008, à 20:43)
Connaître les dernières nouvelles? http://planet-libre.org
Hors ligne
#3 Le 27/09/2008, à 20:48
- siick
Re : Bureau qui ne répond plus!!!
euh.... il n'y a pas une méthode moins couteuse en temps?
Siick d(o-0)b
Cliketi Free Netlabel
Xubuntu 16.04
Hors ligne
#4 Le 27/09/2008, à 20:52
- nwarrenfl
Re : Bureau qui ne répond plus!!!
Ca ne prends pas beaucoup de temps, et tu perdras juste la configuration de ton bureau et de certains programmes...
Sinon fais ceci: copie les dossiers à supprimer dans un dossier de sauvegarde, au cas où tu aurais perdu une configuration importante, ce qui est peu probable!
Dernière modification par nwarrenfl (Le 27/09/2008, à 20:52)
Connaître les dernières nouvelles? http://planet-libre.org
Hors ligne
#5 Le 27/09/2008, à 22:49
- siick
Re : Bureau qui ne répond plus!!!
J'essaye ça dimanche soir .
Siick d(o-0)b
Cliketi Free Netlabel
Xubuntu 16.04
Hors ligne
#6 Le 27/09/2008, à 23:21
- siick
Re : Bureau qui ne répond plus!!!
Bon finalement j'ai pas attendu dimanche après le boulot!
Et ça ne fonctionne toujours pas pas.
J'ai supprimé .gnome, .gnome2 et .gconf et rien n'y fait. Mon bureau ne réagit toujours pas.
Siick d(o-0)b
Cliketi Free Netlabel
Xubuntu 16.04
Hors ligne
#7 Le 28/09/2008, à 09:18
- nwarrenfl
Re : Bureau qui ne répond plus!!!
Peux-tu nous donner ton log?
Via Système -> Administration -> Visionneur de journaux système
Ou à partir du fichier /var/log/messages
On sait jamais...
Dernière modification par nwarrenfl (Le 28/09/2008, à 09:18)
Connaître les dernières nouvelles? http://planet-libre.org
Hors ligne
#8 Le 29/09/2008, à 09:59
- siick
Re : Bureau qui ne répond plus!!!
Bon voilà
Sep 29 09:54:06 siick-desktop syslogd 1.5.0#1ubuntu1: restart.
Sep 29 09:54:06 siick-desktop kernel: Inspecting /boot/System.map-2.6.24-19-generic
Sep 29 09:54:07 siick-desktop kernel: Loaded 27884 symbols from /boot/System.map-2.6.24-19-generic.
Sep 29 09:54:07 siick-desktop kernel: Symbols match kernel version 2.6.24.
Sep 29 09:54:07 siick-desktop kernel: Loaded 37301 symbols from 93 modules.
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] Initializing cgroup subsys cpuset
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] Initializing cgroup subsys cpu
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Aug 20 22:56:21 UTC 2008 (Ubuntu 2.6.24-19.41-generic)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] BIOS-provided physical RAM map:
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] 2174MB HIGHMEM available.
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] 896MB LOWMEM available.
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] found SMP MP-table at 000f3900
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] Zone PFN ranges:
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] DMA 0 -> 4096
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] Normal 4096 -> 229376
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] HighMem 229376 -> 786144
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] Movable zone start PFN for each node
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] early_node_map[1] active PFN ranges
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] 0: 0 -> 786144
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] DMI 2.4 present.
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: RSDP signature @ 0xC00F7860 checksum 0
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: RSDP 000F7860, 0014 (r0 IntelR)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: RSDT BFEE3040, 0038 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: FACP BFEE30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: DSDT BFEE3180, 4AA6 (r1 INTELR AWRDACPI 1000 MSFT 100000E)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: FACS BFEE0000, 0040
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: MCFG BFEE7D80, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: APIC BFEE7C80, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: SSDT BFEE7E00, 015C (r1 PmRef Cpu0Ist 3000 INTL 20041203)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: SSDT BFEE8290, 02F1 (r1 PmRef CpuPm 3000 INTL 20041203)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] Processor #0 6:15 APIC version 20
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] Processor #1 6:15 APIC version 20
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] Allocating PCI resources starting at c0000000 (gap: bff00000:20100000)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 000000000009f000
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780003
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] Kernel command line: root=UUID=930dc1df-8be2-46c0-8b8b-04cc920bdc52 ro quiet splash
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] Enabling fast FPU save and restore... done.
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] Initializing CPU#0
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Sep 29 09:54:07 siick-desktop kernel: [ 0.000000] Detected 1862.029 MHz processor.
Sep 29 09:54:07 siick-desktop kernel: [ 200.062002] Console: colour VGA+ 80x25
Sep 29 09:54:07 siick-desktop kernel: [ 200.062006] console [tty0] enabled
Sep 29 09:54:07 siick-desktop kernel: [ 200.062244] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Sep 29 09:54:07 siick-desktop kernel: [ 200.062504] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Sep 29 09:54:07 siick-desktop kernel: [ 200.213127] Memory: 3106036k/3144576k available (2177k kernel code, 37312k reserved, 1006k data, 368k init, 2227072k highmem)
Sep 29 09:54:07 siick-desktop kernel: [ 200.213134] virtual kernel memory layout:
Sep 29 09:54:07 siick-desktop kernel: [ 200.213135] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
Sep 29 09:54:07 siick-desktop kernel: [ 200.213136] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Sep 29 09:54:07 siick-desktop kernel: [ 200.213137] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
Sep 29 09:54:07 siick-desktop kernel: [ 200.213138] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
Sep 29 09:54:07 siick-desktop kernel: [ 200.213139] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
Sep 29 09:54:07 siick-desktop kernel: [ 200.213139] .data : 0xc03204c4 - 0xc041bdc4 (1006 kB)
Sep 29 09:54:07 siick-desktop kernel: [ 200.213140] .text : 0xc0100000 - 0xc03204c4 (2177 kB)
Sep 29 09:54:07 siick-desktop kernel: [ 200.213143] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Sep 29 09:54:07 siick-desktop kernel: [ 200.213182] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Sep 29 09:54:07 siick-desktop kernel: [ 200.293070] Calibrating delay using timer specific routine.. 3727.14 BogoMIPS (lpj=7454281)
Sep 29 09:54:07 siick-desktop kernel: [ 200.293093] Security Framework initialized
Sep 29 09:54:07 siick-desktop kernel: [ 200.293099] SELinux: Disabled at boot.
Sep 29 09:54:07 siick-desktop kernel: [ 200.293112] AppArmor: AppArmor initialized
Sep 29 09:54:07 siick-desktop kernel: [ 200.293116] Failure registering capabilities with primary security module.
Sep 29 09:54:07 siick-desktop kernel: [ 200.293123] Mount-cache hash table entries: 512
Sep 29 09:54:07 siick-desktop kernel: [ 200.293237] Initializing cgroup subsys ns
Sep 29 09:54:07 siick-desktop kernel: [ 200.293242] Initializing cgroup subsys cpuacct
Sep 29 09:54:07 siick-desktop kernel: [ 200.293258] monitor/mwait feature present.
Sep 29 09:54:07 siick-desktop kernel: [ 200.293260] using mwait in idle threads.
Sep 29 09:54:07 siick-desktop kernel: [ 200.293263] CPU: L1 I cache: 32K, L1 D cache: 32K
Sep 29 09:54:07 siick-desktop kernel: [ 200.293265] CPU: L2 cache: 2048K
Sep 29 09:54:07 siick-desktop kernel: [ 200.293268] CPU: Physical Processor ID: 0
Sep 29 09:54:07 siick-desktop kernel: [ 200.293269] CPU: Processor Core ID: 0
Sep 29 09:54:07 siick-desktop kernel: [ 200.293280] Compat vDSO mapped to ffffe000.
Sep 29 09:54:07 siick-desktop kernel: [ 200.293292] Checking 'hlt' instruction... OK.
Sep 29 09:54:07 siick-desktop kernel: [ 200.309437] SMP alternatives: switching to UP code
Sep 29 09:54:07 siick-desktop kernel: [ 200.310926] Early unpacking initramfs... done
Sep 29 09:54:07 siick-desktop kernel: [ 200.629981] ACPI: Core revision 20070126
Sep 29 09:54:07 siick-desktop kernel: [ 200.630019] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Sep 29 09:54:07 siick-desktop kernel: [ 200.634342] CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
Sep 29 09:54:07 siick-desktop kernel: [ 200.634356] SMP alternatives: switching to SMP code
Sep 29 09:54:07 siick-desktop kernel: [ 200.635003] Booting processor 1/1 eip 3000
Sep 29 09:54:07 siick-desktop kernel: [ 200.645170] Initializing CPU#1
Sep 29 09:54:07 siick-desktop kernel: [ 200.724349] Calibrating delay using timer specific routine.. 3724.29 BogoMIPS (lpj=7448592)
Sep 29 09:54:07 siick-desktop kernel: [ 200.724360] monitor/mwait feature present.
Sep 29 09:54:07 siick-desktop kernel: [ 200.724363] CPU: L1 I cache: 32K, L1 D cache: 32K
Sep 29 09:54:07 siick-desktop kernel: [ 200.724364] CPU: L2 cache: 2048K
Sep 29 09:54:07 siick-desktop kernel: [ 200.724366] CPU: Physical Processor ID: 0
Sep 29 09:54:07 siick-desktop kernel: [ 200.724367] CPU: Processor Core ID: 1
Sep 29 09:54:07 siick-desktop kernel: [ 200.724883] CPU1: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06
Sep 29 09:54:07 siick-desktop kernel: [ 200.724901] Total of 2 processors activated (7451.43 BogoMIPS).
Sep 29 09:54:07 siick-desktop kernel: [ 200.725041] ENABLING IO-APIC IRQs
Sep 29 09:54:07 siick-desktop kernel: [ 200.725204] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Sep 29 09:54:07 siick-desktop kernel: [ 200.872208] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Sep 29 09:54:07 siick-desktop kernel: [ 200.892189] Brought up 2 CPUs
Sep 29 09:54:07 siick-desktop kernel: [ 200.892427] net_namespace: 64 bytes
Sep 29 09:54:07 siick-desktop kernel: [ 200.892434] Booting paravirtualized kernel on bare hardware
Sep 29 09:54:07 siick-desktop kernel: [ 200.892840] Time: 9:53:44 Date: 09/29/08
Sep 29 09:54:07 siick-desktop kernel: [ 200.892864] NET: Registered protocol family 16
Sep 29 09:54:07 siick-desktop kernel: [ 200.893042] EISA bus registered
Sep 29 09:54:07 siick-desktop kernel: [ 200.893047] ACPI: bus type pci registered
Sep 29 09:54:07 siick-desktop kernel: [ 200.893957] PCI: PCI BIOS revision 3.00 entry at 0xfa020, last bus=3
Sep 29 09:54:07 siick-desktop kernel: [ 200.893959] PCI: Using configuration type 1
Sep 29 09:54:07 siick-desktop kernel: [ 200.893969] Setting up standard PCI resources
Sep 29 09:54:07 siick-desktop kernel: [ 200.901202] ACPI: Interpreter enabled
Sep 29 09:54:07 siick-desktop kernel: [ 200.901205] ACPI: (supports S0 S3 S4 S5)
Sep 29 09:54:07 siick-desktop kernel: [ 200.901217] ACPI: Using IOAPIC for interrupt routing
Sep 29 09:54:07 siick-desktop kernel: [ 200.906402] ACPI: PCI Root Bridge [PCI0] (0000:00)
Sep 29 09:54:07 siick-desktop kernel: [ 200.907023] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
Sep 29 09:54:07 siick-desktop kernel: [ 200.907027] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
Sep 29 09:54:07 siick-desktop kernel: [ 200.907456] PCI: Transparent bridge - 0000:00:1e.0
Sep 29 09:54:07 siick-desktop kernel: [ 200.920729] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
Sep 29 09:54:07 siick-desktop kernel: [ 200.920835] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Sep 29 09:54:07 siick-desktop kernel: [ 200.920938] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
Sep 29 09:54:07 siick-desktop kernel: [ 200.921040] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Sep 29 09:54:07 siick-desktop kernel: [ 200.921143] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Sep 29 09:54:07 siick-desktop kernel: [ 200.921246] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Sep 29 09:54:07 siick-desktop kernel: [ 200.921350] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 12 14 15)
Sep 29 09:54:07 siick-desktop kernel: [ 200.921453] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Sep 29 09:54:07 siick-desktop kernel: [ 200.921573] Linux Plug and Play Support v0.97 (c) Adam Belay
Sep 29 09:54:07 siick-desktop kernel: [ 200.921602] pnp: PnP ACPI init
Sep 29 09:54:07 siick-desktop kernel: [ 200.921608] ACPI: bus type pnp registered
Sep 29 09:54:07 siick-desktop kernel: [ 200.924549] pnpacpi: exceeded the max number of mem resources: 12
Sep 29 09:54:07 siick-desktop kernel: [ 200.924607] pnp: PnP ACPI: found 15 devices
Sep 29 09:54:07 siick-desktop kernel: [ 200.924609] ACPI: ACPI bus type pnp unregistered
Sep 29 09:54:07 siick-desktop kernel: [ 200.924613] PnPBIOS: Disabled by ACPI PNP
Sep 29 09:54:07 siick-desktop kernel: [ 200.924823] PCI: Using ACPI for IRQ routing
Sep 29 09:54:07 siick-desktop kernel: [ 200.924825] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Sep 29 09:54:07 siick-desktop kernel: [ 200.968174] NET: Registered protocol family 8
Sep 29 09:54:07 siick-desktop kernel: [ 200.968176] NET: Registered protocol family 20
Sep 29 09:54:07 siick-desktop kernel: [ 200.968236] AppArmor: AppArmor Filesystem Enabled
Sep 29 09:54:07 siick-desktop kernel: [ 200.972080] Time: tsc clocksource has been installed.
Sep 29 09:54:07 siick-desktop kernel: [ 200.988271] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
Sep 29 09:54:07 siick-desktop kernel: [ 200.988274] system 00:01: ioport range 0x800-0x87f has been reserved
Sep 29 09:54:07 siick-desktop kernel: [ 200.988276] system 00:01: ioport range 0x290-0x297 has been reserved
Sep 29 09:54:07 siick-desktop kernel: [ 200.988279] system 00:01: ioport range 0x880-0x88f has been reserved
Sep 29 09:54:07 siick-desktop kernel: [ 200.988290] system 00:0b: ioport range 0x400-0x4bf could not be reserved
Sep 29 09:54:07 siick-desktop kernel: [ 200.988297] system 00:0d: iomem range 0xe0000000-0xefffffff could not be reserved
Sep 29 09:54:07 siick-desktop kernel: [ 200.988304] system 00:0e: iomem range 0xd1e00-0xd3fff has been reserved
Sep 29 09:54:07 siick-desktop kernel: [ 200.988307] system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
Sep 29 09:54:07 siick-desktop kernel: [ 200.988310] system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
Sep 29 09:54:07 siick-desktop kernel: [ 200.988313] system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
Sep 29 09:54:07 siick-desktop kernel: [ 200.988316] system 00:0e: iomem range 0xbff00000-0xbfffffff has been reserved
Sep 29 09:54:07 siick-desktop kernel: [ 200.988319] system 00:0e: iomem range 0xbfee0000-0xbfefffff could not be reserved
Sep 29 09:54:07 siick-desktop kernel: [ 200.988322] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
Sep 29 09:54:07 siick-desktop kernel: [ 200.988325] system 00:0e: iomem range 0x100000-0xbfedffff could not be reserved
Sep 29 09:54:07 siick-desktop kernel: [ 200.988328] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved
Sep 29 09:54:07 siick-desktop kernel: [ 200.988331] system 00:0e: iomem range 0xfed14000-0xfed1dfff could not be reserved
Sep 29 09:54:07 siick-desktop kernel: [ 200.988334] system 00:0e: iomem range 0xfed20000-0xfed8ffff could not be reserved
Sep 29 09:54:07 siick-desktop kernel: [ 200.988337] system 00:0e: iomem range 0xfee00000-0xfee00fff could not be reserved
Sep 29 09:54:07 siick-desktop kernel: [ 201.018678] PCI: Bridge: 0000:00:01.0
Sep 29 09:54:07 siick-desktop kernel: [ 201.018681] IO window: c000-cfff
Sep 29 09:54:07 siick-desktop kernel: [ 201.018684] MEM window: f8000000-fbffffff
Sep 29 09:54:07 siick-desktop kernel: [ 201.018687] PREFETCH window: d0000000-dfffffff
Sep 29 09:54:07 siick-desktop kernel: [ 201.018690] PCI: Bridge: 0000:00:1c.0
Sep 29 09:54:07 siick-desktop kernel: [ 201.018692] IO window: d000-dfff
Sep 29 09:54:07 siick-desktop kernel: [ 201.018696] MEM window: fdc00000-fdcfffff
Sep 29 09:54:07 siick-desktop kernel: [ 201.018699] PREFETCH window: fdd00000-fddfffff
Sep 29 09:54:07 siick-desktop kernel: [ 201.018703] PCI: Bridge: 0000:00:1e.0
Sep 29 09:54:07 siick-desktop kernel: [ 201.018705] IO window: b000-bfff
Sep 29 09:54:07 siick-desktop kernel: [ 201.018709] MEM window: fdb00000-fdbfffff
Sep 29 09:54:07 siick-desktop kernel: [ 201.018712] PREFETCH window: fde00000-fdefffff
Sep 29 09:54:07 siick-desktop kernel: [ 201.018725] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
Sep 29 09:54:07 siick-desktop kernel: [ 201.018745] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
Sep 29 09:54:07 siick-desktop kernel: [ 201.018768] NET: Registered protocol family 2
Sep 29 09:54:07 siick-desktop kernel: [ 201.056378] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Sep 29 09:54:07 siick-desktop kernel: [ 201.056593] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Sep 29 09:54:07 siick-desktop kernel: [ 201.057001] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Sep 29 09:54:07 siick-desktop kernel: [ 201.057214] TCP: Hash tables configured (established 131072 bind 65536)
Sep 29 09:54:07 siick-desktop kernel: [ 201.057217] TCP reno registered
Sep 29 09:54:07 siick-desktop kernel: [ 201.068496] checking if image is initramfs... it is
Sep 29 09:54:07 siick-desktop kernel: [ 201.698139] Freeing initrd memory: 7714k freed
Sep 29 09:54:07 siick-desktop kernel: [ 201.698878] audit: initializing netlink socket (disabled)
Sep 29 09:54:07 siick-desktop kernel: [ 201.698890] audit(1222682024.368:1): initialized
Sep 29 09:54:07 siick-desktop kernel: [ 201.699109] highmem bounce pool size: 64 pages
Sep 29 09:54:07 siick-desktop kernel: [ 201.700949] VFS: Disk quotas dquot_6.5.1
Sep 29 09:54:07 siick-desktop kernel: [ 201.701019] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Sep 29 09:54:07 siick-desktop kernel: [ 201.701143] io scheduler noop registered
Sep 29 09:54:07 siick-desktop kernel: [ 201.701146] io scheduler anticipatory registered
Sep 29 09:54:07 siick-desktop kernel: [ 201.701147] io scheduler deadline registered
Sep 29 09:54:07 siick-desktop kernel: [ 201.701157] io scheduler cfq registered (default)
Sep 29 09:54:07 siick-desktop kernel: [ 201.701386] assign_interrupt_mode Found MSI capability
Sep 29 09:54:07 siick-desktop kernel: [ 201.701517] assign_interrupt_mode Found MSI capability
Sep 29 09:54:07 siick-desktop kernel: [ 201.701791] isapnp: Scanning for PnP cards...
Sep 29 09:54:07 siick-desktop kernel: [ 202.054431] isapnp: No Plug & Play device found
Sep 29 09:54:07 siick-desktop kernel: [ 202.077464] Real Time Clock Driver v1.12ac
Sep 29 09:54:07 siick-desktop kernel: [ 202.077565] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Sep 29 09:54:07 siick-desktop kernel: [ 202.077676] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Sep 29 09:54:07 siick-desktop kernel: [ 202.077793] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Sep 29 09:54:07 siick-desktop kernel: [ 202.078294] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Sep 29 09:54:07 siick-desktop kernel: [ 202.078491] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Sep 29 09:54:07 siick-desktop kernel: [ 202.079236] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Sep 29 09:54:07 siick-desktop kernel: [ 202.079295] input: Macintosh mouse button emulation as /devices/virtual/input/input0
Sep 29 09:54:07 siick-desktop kernel: [ 202.079384] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Sep 29 09:54:07 siick-desktop kernel: [ 202.079386] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Sep 29 09:54:07 siick-desktop kernel: [ 202.079837] serio: i8042 KBD port at 0x60,0x64 irq 1
Sep 29 09:54:07 siick-desktop kernel: [ 202.099201] mice: PS/2 mouse device common for all mice
Sep 29 09:54:07 siick-desktop kernel: [ 202.099318] EISA: Probing bus 0 at eisa.0
Sep 29 09:54:07 siick-desktop kernel: [ 202.099346] EISA: Detected 0 cards.
Sep 29 09:54:07 siick-desktop kernel: [ 202.099349] cpuidle: using governor ladder
Sep 29 09:54:07 siick-desktop kernel: [ 202.099351] cpuidle: using governor menu
Sep 29 09:54:07 siick-desktop kernel: [ 202.099434] NET: Registered protocol family 1
Sep 29 09:54:07 siick-desktop kernel: [ 202.099458] Using IPI No-Shortcut mode
Sep 29 09:54:07 siick-desktop kernel: [ 202.099484] registered taskstats version 1
Sep 29 09:54:07 siick-desktop kernel: [ 202.099575] Magic number: 8:490:880
Sep 29 09:54:07 siick-desktop kernel: [ 202.099600] hash matches device ptyx4
Sep 29 09:54:07 siick-desktop kernel: [ 202.099626] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Sep 29 09:54:07 siick-desktop kernel: [ 202.099628] EDD information not available.
Sep 29 09:54:07 siick-desktop kernel: [ 202.099795] Freeing unused kernel memory: 368k freed
Sep 29 09:54:07 siick-desktop kernel: [ 202.138071] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Sep 29 09:54:07 siick-desktop kernel: [ 203.297016] fuse init (API version 7.9)
Sep 29 09:54:07 siick-desktop kernel: [ 203.309575] ACPI: Fan [FAN] (on)
Sep 29 09:54:07 siick-desktop kernel: [ 203.315160] ACPI: SSDT BFEE8200, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20041203)
Sep 29 09:54:07 siick-desktop kernel: [ 203.315313] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
Sep 29 09:54:07 siick-desktop kernel: [ 203.315322] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
Sep 29 09:54:07 siick-desktop kernel: [ 203.316619] ACPI: Thermal Zone [THRM] (27 C)
Sep 29 09:54:07 siick-desktop kernel: [ 203.438425] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Sep 29 09:54:07 siick-desktop kernel: [ 203.438429] Copyright (c) 1999-2006 Intel Corporation.
Sep 29 09:54:07 siick-desktop kernel: [ 203.438474] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 17
Sep 29 09:54:07 siick-desktop kernel: [ 203.454239] usbcore: registered new interface driver usbfs
Sep 29 09:54:07 siick-desktop kernel: [ 203.454260] usbcore: registered new interface driver hub
Sep 29 09:54:07 siick-desktop kernel: [ 203.454575] usbcore: registered new device driver usb
Sep 29 09:54:07 siick-desktop kernel: [ 203.456230] USB Universal Host Controller Interface driver v3.0
Sep 29 09:54:07 siick-desktop kernel: [ 203.464361] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:17:87:b1:f4
Sep 29 09:54:07 siick-desktop kernel: [ 203.513396] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Sep 29 09:54:07 siick-desktop kernel: [ 203.513443] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
Sep 29 09:54:07 siick-desktop kernel: [ 203.513456] uhci_hcd 0000:00:1a.0: UHCI Host Controller
Sep 29 09:54:07 siick-desktop kernel: [ 203.513649] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
Sep 29 09:54:07 siick-desktop kernel: [ 203.513676] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000fe00
Sep 29 09:54:07 siick-desktop kernel: [ 203.513800] usb usb1: configuration #1 chosen from 1 choice
Sep 29 09:54:07 siick-desktop kernel: [ 203.513823] hub 1-0:1.0: USB hub found
Sep 29 09:54:07 siick-desktop kernel: [ 203.513827] hub 1-0:1.0: 2 ports detected
Sep 29 09:54:07 siick-desktop kernel: [ 203.615505] ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 18
Sep 29 09:54:07 siick-desktop kernel: [ 203.615519] uhci_hcd 0000:00:1a.1: UHCI Host Controller
Sep 29 09:54:07 siick-desktop kernel: [ 203.615544] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
Sep 29 09:54:07 siick-desktop kernel: [ 203.615570] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000fd00
Sep 29 09:54:07 siick-desktop kernel: [ 203.615678] usb usb2: configuration #1 chosen from 1 choice
Sep 29 09:54:07 siick-desktop kernel: [ 203.615700] hub 2-0:1.0: USB hub found
Sep 29 09:54:07 siick-desktop kernel: [ 203.615704] hub 2-0:1.0: 2 ports detected
Sep 29 09:54:07 siick-desktop kernel: [ 203.667861] SCSI subsystem initialized
Sep 29 09:54:07 siick-desktop kernel: [ 203.719312] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
Sep 29 09:54:07 siick-desktop kernel: [ 203.719326] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Sep 29 09:54:07 siick-desktop kernel: [ 203.719349] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
Sep 29 09:54:07 siick-desktop kernel: [ 203.719374] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000fc00
Sep 29 09:54:07 siick-desktop kernel: [ 203.719473] usb usb3: configuration #1 chosen from 1 choice
Sep 29 09:54:07 siick-desktop kernel: [ 203.719496] hub 3-0:1.0: USB hub found
Sep 29 09:54:07 siick-desktop kernel: [ 203.719500] hub 3-0:1.0: 2 ports detected
Sep 29 09:54:07 siick-desktop kernel: [ 203.747578] Floppy drive(s): fd0 is 1.44M
Sep 29 09:54:07 siick-desktop kernel: [ 203.766787] FDC 0 is a post-1991 82077
Sep 29 09:54:07 siick-desktop kernel: [ 203.823148] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 20
Sep 29 09:54:07 siick-desktop kernel: [ 203.823163] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Sep 29 09:54:07 siick-desktop kernel: [ 203.823186] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
Sep 29 09:54:07 siick-desktop kernel: [ 203.823210] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000fb00
Sep 29 09:54:07 siick-desktop kernel: [ 203.823314] usb usb4: configuration #1 chosen from 1 choice
Sep 29 09:54:07 siick-desktop kernel: [ 203.823338] hub 4-0:1.0: USB hub found
Sep 29 09:54:07 siick-desktop kernel: [ 203.823342] hub 4-0:1.0: 2 ports detected
Sep 29 09:54:07 siick-desktop kernel: [ 203.854996] usb 1-2: new full speed USB device using uhci_hcd and address 2
Sep 29 09:54:07 siick-desktop kernel: [ 203.926954] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
Sep 29 09:54:07 siick-desktop kernel: [ 203.926968] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Sep 29 09:54:07 siick-desktop kernel: [ 203.926992] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
Sep 29 09:54:07 siick-desktop kernel: [ 203.927017] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000fa00
Sep 29 09:54:07 siick-desktop kernel: [ 203.927121] usb usb5: configuration #1 chosen from 1 choice
Sep 29 09:54:07 siick-desktop kernel: [ 203.927142] hub 5-0:1.0: USB hub found
Sep 29 09:54:07 siick-desktop kernel: [ 203.927147] hub 5-0:1.0: 2 ports detected
Sep 29 09:54:07 siick-desktop kernel: [ 204.031834] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 20
Sep 29 09:54:07 siick-desktop kernel: [ 204.104778] usb 1-2: configuration #1 chosen from 1 choice
Sep 29 09:54:07 siick-desktop kernel: [ 204.346164] usb 2-1: new full speed USB device using uhci_hcd and address 2
Sep 29 09:54:07 siick-desktop kernel: [ 204.520138] usb 2-1: configuration #1 chosen from 1 choice
Sep 29 09:54:07 siick-desktop kernel: [ 204.769413] usb 3-2: new full speed USB device using uhci_hcd and address 2
Sep 29 09:54:07 siick-desktop kernel: [ 204.949374] usb 3-2: configuration #1 chosen from 1 choice
Sep 29 09:54:07 siick-desktop kernel: [ 205.032951] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
Sep 29 09:54:07 siick-desktop kernel: [ 205.032955] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part
Sep 29 09:54:07 siick-desktop kernel: [ 205.033264] scsi0 : ahci
Sep 29 09:54:07 siick-desktop kernel: [ 205.033475] scsi1 : ahci
Sep 29 09:54:07 siick-desktop kernel: [ 205.033649] scsi2 : ahci
Sep 29 09:54:07 siick-desktop kernel: [ 205.033830] scsi3 : ahci
Sep 29 09:54:07 siick-desktop kernel: [ 205.034577] scsi4 : ahci
Sep 29 09:54:07 siick-desktop kernel: [ 205.034774] scsi5 : ahci
Sep 29 09:54:07 siick-desktop kernel: [ 205.034870] ata1: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc100 irq 221
Sep 29 09:54:07 siick-desktop kernel: [ 205.034873] ata2: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc180 irq 221
Sep 29 09:54:07 siick-desktop kernel: [ 205.034876] ata3: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc200 irq 221
Sep 29 09:54:07 siick-desktop kernel: [ 205.034878] ata4: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc280 irq 221
Sep 29 09:54:07 siick-desktop kernel: [ 205.034880] ata5: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc300 irq 221
Sep 29 09:54:07 siick-desktop kernel: [ 205.034883] ata6: SATA max UDMA/133 abar m2048@0xfdffc000 port 0xfdffc380 irq 221
Sep 29 09:54:07 siick-desktop kernel: [ 205.192648] usb 4-1: new full speed USB device using uhci_hcd and address 2
Sep 29 09:54:07 siick-desktop kernel: [ 205.379663] usb 4-1: configuration #1 chosen from 1 choice
Sep 29 09:54:07 siick-desktop kernel: [ 205.508095] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Sep 29 09:54:07 siick-desktop kernel: [ 205.526535] ata1.00: ATA-7: WDC WD3200JS-00PDB0, 21.00M21, max UDMA/133
Sep 29 09:54:07 siick-desktop kernel: [ 205.526538] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 1)
Sep 29 09:54:07 siick-desktop kernel: [ 205.527254] ata1.00: configured for UDMA/133
Sep 29 09:54:07 siick-desktop kernel: [ 205.619914] usb 5-1: new low speed USB device using uhci_hcd and address 2
Sep 29 09:54:07 siick-desktop kernel: [ 205.796914] usb 5-1: configuration #1 chosen from 1 choice
Sep 29 09:54:07 siick-desktop kernel: [ 205.836513] ata2: SATA link down (SStatus 0 SControl 300)
Sep 29 09:54:07 siick-desktop kernel: [ 206.310677] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Sep 29 09:54:07 siick-desktop kernel: [ 206.350459] ata3.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133
Sep 29 09:54:07 siick-desktop kernel: [ 206.350463] ata3.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
Sep 29 09:54:07 siick-desktop kernel: [ 206.408667] ata3.00: configured for UDMA/133
Sep 29 09:54:07 siick-desktop kernel: [ 206.717977] ata4: SATA link down (SStatus 0 SControl 300)
Sep 29 09:54:07 siick-desktop kernel: [ 207.029406] ata5: SATA link down (SStatus 0 SControl 300)
Sep 29 09:54:07 siick-desktop kernel: [ 207.340856] ata6: SATA link down (SStatus 0 SControl 300)
Sep 29 09:54:07 siick-desktop kernel: [ 207.340990] scsi 0:0:0:0: Direct-Access ATA WDC WD3200JS-00P 21.0 PQ: 0 ANSI: 5
Sep 29 09:54:07 siick-desktop kernel: [ 207.341143] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM332082 3.AA PQ: 0 ANSI: 5
Sep 29 09:54:07 siick-desktop kernel: [ 207.342003] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 21
Sep 29 09:54:07 siick-desktop kernel: [ 207.342019] ehci_hcd 0000:00:1a.7: EHCI Host Controller
Sep 29 09:54:07 siick-desktop kernel: [ 207.342048] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
Sep 29 09:54:07 siick-desktop kernel: [ 207.345941] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xfdffe000
Sep 29 09:54:07 siick-desktop kernel: [ 207.353125] Driver 'sd' needs updating - please use bus_type methods
Sep 29 09:54:07 siick-desktop kernel: [ 207.353191] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
Sep 29 09:54:07 siick-desktop kernel: [ 207.353202] sd 0:0:0:0: [sda] Write Protect is off
Sep 29 09:54:07 siick-desktop kernel: [ 207.353219] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 29 09:54:07 siick-desktop kernel: [ 207.353265] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
Sep 29 09:54:07 siick-desktop kernel: [ 207.353275] sd 0:0:0:0: [sda] Write Protect is off
Sep 29 09:54:07 siick-desktop kernel: [ 207.353292] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 29 09:54:07 siick-desktop kernel: [ 207.353295] sda: sda1 sda2 sda3
Sep 29 09:54:07 siick-desktop kernel: [ 207.355431] sd 0:0:0:0: [sda] Attached SCSI disk
Sep 29 09:54:07 siick-desktop kernel: [ 207.355482] sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Sep 29 09:54:07 siick-desktop kernel: [ 207.355493] sd 2:0:0:0: [sdb] Write Protect is off
Sep 29 09:54:07 siick-desktop kernel: [ 207.355513] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 29 09:54:07 siick-desktop kernel: [ 207.355558] sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Sep 29 09:54:07 siick-desktop kernel: [ 207.355579] sd 2:0:0:0: [sdb] Write Protect is off
Sep 29 09:54:07 siick-desktop kernel: [ 207.355596] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Sep 29 09:54:07 siick-desktop kernel: [ 207.355599] sdb:<6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Sep 29 09:54:07 siick-desktop kernel: [ 207.360975] usb usb6: configuration #1 chosen from 1 choice
Sep 29 09:54:07 siick-desktop kernel: [ 207.361002] hub 6-0:1.0: USB hub found
Sep 29 09:54:07 siick-desktop kernel: [ 207.361009] hub 6-0:1.0: 4 ports detected
Sep 29 09:54:07 siick-desktop kernel: [ 207.371077] sdb1 sdb2 < sdb5 > sdb3
Sep 29 09:54:07 siick-desktop kernel: [ 207.395951] sd 2:0:0:0: [sdb] Attached SCSI disk
Sep 29 09:54:07 siick-desktop kernel: [ 207.400117] sd 0:0:0:0: Attached scsi generic sg0 type 0
Sep 29 09:54:07 siick-desktop kernel: [ 207.400136] sd 2:0:0:0: Attached scsi generic sg1 type 0
Sep 29 09:54:07 siick-desktop kernel: [ 207.416741] usb 1-2: USB disconnect, address 2
Sep 29 09:54:07 siick-desktop kernel: [ 207.468793] ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 19 (level, low) -> IRQ 20
Sep 29 09:54:07 siick-desktop kernel: [ 207.470337] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
Sep 29 09:54:07 siick-desktop kernel: [ 207.470349] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Sep 29 09:54:07 siick-desktop kernel: [ 207.470373] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
Sep 29 09:54:07 siick-desktop kernel: [ 207.474267] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfdffd000
Sep 29 09:54:07 siick-desktop kernel: [ 207.492569] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Sep 29 09:54:07 siick-desktop kernel: [ 207.492695] usb usb7: configuration #1 chosen from 1 choice
Sep 29 09:54:07 siick-desktop kernel: [ 207.492718] hub 7-0:1.0: USB hub found
Sep 29 09:54:07 siick-desktop kernel: [ 207.492724] hub 7-0:1.0: 6 ports detected
Sep 29 09:54:07 siick-desktop kernel: [ 207.521433] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[fdbfe000-fdbfe7ff] Max Packet=[2048] IR/IT contexts=[4/8]
Sep 29 09:54:07 siick-desktop kernel: [ 207.548497] usb 2-1: USB disconnect, address 2
Sep 29 09:54:07 siick-desktop kernel: [ 207.911855] usb 6-2: new high speed USB device using ehci_hcd and address 2
Sep 29 09:54:07 siick-desktop kernel: [ 208.127251] usb 6-2: configuration #1 chosen from 1 choice
Sep 29 09:54:07 siick-desktop kernel: [ 208.367045] usb 6-3: new high speed USB device using ehci_hcd and address 3
Sep 29 09:54:07 siick-desktop kernel: [ 208.500589] usb 6-3: configuration #1 chosen from 1 choice
Sep 29 09:54:07 siick-desktop kernel: [ 209.161706] usb 4-1: USB disconnect, address 2
Sep 29 09:54:07 siick-desktop kernel: [ 209.161761] usbcore: registered new interface driver libusual
Sep 29 09:54:07 siick-desktop kernel: [ 209.161778] usbcore: registered new interface driver hiddev
Sep 29 09:54:07 siick-desktop kernel: [ 209.165949] Initializing USB Mass Storage driver...
Sep 29 09:54:07 siick-desktop kernel: [ 209.401218] usb 4-1: new full speed USB device using uhci_hcd and address 3
Sep 29 09:54:07 siick-desktop kernel: [ 209.588414] usb 4-1: configuration #1 chosen from 1 choice
Sep 29 09:54:07 siick-desktop kernel: [ 209.591468] usb 5-1: USB disconnect, address 2
Sep 29 09:54:07 siick-desktop kernel: [ 209.828526] usb 5-1: new low speed USB device using uhci_hcd and address 3
Sep 29 09:54:07 siick-desktop kernel: [ 210.005670] usb 5-1: configuration #1 chosen from 1 choice
Sep 29 09:54:07 siick-desktop kernel: [ 210.015634] usb 3-2: USB disconnect, address 2
Sep 29 09:54:07 siick-desktop kernel: [ 210.251758] usb 3-2: new full speed USB device using uhci_hcd and address 3
Sep 29 09:54:07 siick-desktop kernel: [ 210.428925] usb 3-2: configuration #1 chosen from 1 choice
Sep 29 09:54:07 siick-desktop kernel: [ 210.432607] scsi6 : SCSI emulation for USB Mass Storage devices
Sep 29 09:54:07 siick-desktop kernel: [ 210.433233] scsi7 : SCSI emulation for USB Mass Storage devices
Sep 29 09:54:07 siick-desktop kernel: [ 210.447061] input: Dexin Corp. Saitek Game Mouse as /devices/pci0000:00/0000:00:1d.2/usb5/5-1/5-1:1.0/input/input2
Sep 29 09:54:07 siick-desktop kernel: [ 210.467408] input,hidraw0: USB HID v1.10 Mouse [Dexin Corp. Saitek Game Mouse ] on usb-0000:00:1d.2-1
Sep 29 09:54:07 siick-desktop kernel: [ 210.467432] usbcore: registered new interface driver usbhid
Sep 29 09:54:07 siick-desktop kernel: [ 210.467436] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Sep 29 09:54:07 siick-desktop kernel: [ 210.467440] usbcore: registered new interface driver usb-storage
Sep 29 09:54:07 siick-desktop kernel: [ 210.467445] USB Mass Storage support registered.
Sep 29 09:54:07 siick-desktop kernel: [ 210.619577] Attempting manual resume
Sep 29 09:54:07 siick-desktop kernel: [ 210.666869] kjournald starting. Commit interval 5 seconds
Sep 29 09:54:07 siick-desktop kernel: [ 210.666875] EXT3-fs: mounted filesystem with ordered data mode.
Sep 29 09:54:07 siick-desktop kernel: [ 215.424594] scsi 7:0:0:0: CD-ROM SONY DVD RW DW-G120A MYS4 PQ: 0 ANSI: 0
Sep 29 09:54:07 siick-desktop kernel: [ 215.432838] scsi 7:0:0:1: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 0
Sep 29 09:54:07 siick-desktop kernel: [ 215.433237] scsi 7:0:0:0: Attached scsi generic sg2 type 5
Sep 29 09:54:07 siick-desktop kernel: [ 215.433322] scsi 6:0:0:0: Direct-Access Generic Flash HS-CF 4.52 PQ: 0 ANSI: 0
Sep 29 09:54:07 siick-desktop kernel: [ 215.433325] scsi 7:0:0:1: Attached scsi generic sg3 type 5
Sep 29 09:54:07 siick-desktop kernel: [ 215.436570] scsi 6:0:0:1: Direct-Access Generic Flash HS-MS/SD 4.52 PQ: 0 ANSI: 0
Sep 29 09:54:07 siick-desktop kernel: [ 215.439826] scsi 6:0:0:2: Direct-Access Generic Flash HS-SM 4.52 PQ: 0 ANSI: 0
Sep 29 09:54:07 siick-desktop kernel: [ 215.444328] sd 6:0:0:0: [sdc] Attached SCSI removable disk
Sep 29 09:54:07 siick-desktop kernel: [ 215.444360] sd 6:0:0:0: Attached scsi generic sg4 type 0
Sep 29 09:54:07 siick-desktop kernel: [ 215.493142] sd 6:0:0:1: [sdd] Attached SCSI removable disk
Sep 29 09:54:07 siick-desktop kernel: [ 215.493187] sd 6:0:0:1: Attached scsi generic sg5 type 0
Sep 29 09:54:07 siick-desktop kernel: [ 215.497363] sd 6:0:0:2: [sde] Attached SCSI removable disk
Sep 29 09:54:07 siick-desktop kernel: [ 215.497398] sd 6:0:0:2: Attached scsi generic sg6 type 0
Sep 29 09:54:07 siick-desktop kernel: [ 217.787380] input: PC Speaker as /devices/platform/pcspkr/input/input3
Sep 29 09:54:07 siick-desktop kernel: [ 217.947253] Linux agpgart interface v0.102
Sep 29 09:54:07 siick-desktop kernel: [ 217.971147] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Sep 29 09:54:07 siick-desktop kernel: [ 218.007721] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Sep 29 09:54:07 siick-desktop kernel: [ 218.027784] iTCO_vendor_support: vendor-support=0
Sep 29 09:54:07 siick-desktop kernel: [ 218.080069] parport_pc 00:09: reported by Plug and Play ACPI
Sep 29 09:54:07 siick-desktop kernel: [ 218.080121] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Sep 29 09:54:07 siick-desktop kernel: [ 218.166414] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
Sep 29 09:54:07 siick-desktop kernel: [ 218.166483] iTCO_wdt: Found a ICH8DH TCO device (Version=2, TCOBASE=0x0460)
Sep 29 09:54:07 siick-desktop kernel: [ 218.166516] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Sep 29 09:54:07 siick-desktop kernel: [ 218.234735] input: Power Button (FF) as /devices/virtual/input/input4
Sep 29 09:54:07 siick-desktop kernel: [ 218.290548] ACPI: Power Button (FF) [PWRF]
Sep 29 09:54:07 siick-desktop kernel: [ 218.290620] input: Power Button (CM) as /devices/virtual/input/input5
Sep 29 09:54:07 siick-desktop kernel: [ 218.354431] ACPI: Power Button (CM) [PWRB]
Sep 29 09:54:07 siick-desktop kernel: [ 218.354488] input: Sleep Button (CM) as /devices/virtual/input/input6
Sep 29 09:54:07 siick-desktop kernel: [ 218.389507] ACPI: Sleep Button (CM) [SLPB]
Sep 29 09:54:07 siick-desktop kernel: [ 218.560666] Linux video capture interface: v2.00
Sep 29 09:54:07 siick-desktop kernel: [ 218.616812] nvidia: module license 'NVIDIA' taints kernel.
Sep 29 09:54:07 siick-desktop kernel: [ 219.060894] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Sep 29 09:54:07 siick-desktop kernel: [ 219.061002] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
Sep 29 09:54:07 siick-desktop kernel: [ 219.210868] saa7130/34: v4l2 driver version 0.2.14 loaded
Sep 29 09:54:07 siick-desktop kernel: [ 219.210922] ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 16 (level, low) -> IRQ 16
Sep 29 09:54:07 siick-desktop kernel: [ 219.210930] saa7133[0]: found at 0000:03:04.0, rev: 209, irq: 16, latency: 84, mmio: 0xfdbff000
Sep 29 09:54:07 siick-desktop kernel: [ 219.210935] saa7133[0]: subsystem: 16be:000e, board: UNKNOWN/GENERIC [card=0,autodetected]
Sep 29 09:54:07 siick-desktop kernel: [ 219.210943] saa7133[0]: board init: gpio is 0
Sep 29 09:54:07 siick-desktop kernel: [ 219.343647] saa7133[0]: i2c eeprom 00: be 16 0e 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
Sep 29 09:54:07 siick-desktop kernel: [ 219.343658] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
Sep 29 09:54:07 siick-desktop kernel: [ 219.343667] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 2a 02 51 96 2b
Sep 29 09:54:07 siick-desktop kernel: [ 219.343675] saa7133[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
Sep 29 09:54:07 siick-desktop kernel: [ 219.343684] saa7133[0]: i2c eeprom 40: ff 21 00 c0 96 10 03 00 c0 1c fd 79 44 9f c2 8f
Sep 29 09:54:07 siick-desktop kernel: [ 219.343693] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Sep 29 09:54:07 siick-desktop kernel: [ 219.343701] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Sep 29 09:54:07 siick-desktop kernel: [ 219.343710] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Sep 29 09:54:07 siick-desktop kernel: [ 219.367719] saa7133[0]: registered device video0 [v4l2]
Sep 29 09:54:07 siick-desktop kernel: [ 219.367740] saa7133[0]: registered device vbi0
Sep 29 09:54:07 siick-desktop kernel: [ 219.432393] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
Sep 29 09:54:07 siick-desktop kernel: [ 219.432407] usbcore: registered new interface driver usblp
Sep 29 09:54:07 siick-desktop kernel: [ 219.599469] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(ZC3XX)
Sep 29 09:54:07 siick-desktop kernel: [ 219.638842] Driver 'sr' needs updating - please use bus_type methods
Sep 29 09:54:07 siick-desktop kernel: [ 219.674871] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Sep 29 09:54:07 siick-desktop kernel: [ 219.674875] Uniform CD-ROM driver Revision: 3.20
Sep 29 09:54:07 siick-desktop kernel: [ 219.689352] sr1: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
Sep 29 09:54:07 siick-desktop kernel: [ 219.732039] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
Sep 29 09:54:07 siick-desktop kernel: [ 219.772754] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
Sep 29 09:54:07 siick-desktop kernel: [ 219.784495] saa7134 ALSA driver for DMA sound loaded
Sep 29 09:54:07 siick-desktop kernel: [ 219.784521] saa7133[0]/alsa: saa7133[0] at 0xfdbff000 irq 16 registered as card -2
Sep 29 09:54:07 siick-desktop kernel: [ 220.224046] usbcore: registered new interface driver gspca
Sep 29 09:54:07 siick-desktop kernel: [ 220.224052] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.20 registered
Sep 29 09:54:07 siick-desktop kernel: [ 220.246218] usbcore: registered new interface driver snd-usb-audio
Sep 29 09:54:07 siick-desktop kernel: [ 220.779668] lp0: using parport0 (interrupt-driven).
Sep 29 09:54:07 siick-desktop kernel: [ 220.819612] w83627ehf: Found W83627DHG chip at 0x290
Sep 29 09:54:07 siick-desktop kernel: [ 220.833939] coretemp coretemp.0: Using undocumented features, absolute temperature might be wrong!
Sep 29 09:54:07 siick-desktop kernel: [ 220.833984] coretemp coretemp.1: Using undocumented features, absolute temperature might be wrong!
Sep 29 09:54:07 siick-desktop kernel: [ 220.931601] Adding 3028212k swap on /dev/sdb5. Priority:-1 extents:1 across:3028212k
Sep 29 09:54:07 siick-desktop kernel: [ 221.474378] EXT3 FS on sdb1, internal journal
Sep 29 09:54:07 siick-desktop kernel: [ 221.589725] device-mapper: uevent: version 1.0.3
Sep 29 09:54:07 siick-desktop kernel: [ 221.589752] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
Sep 29 09:54:07 siick-desktop kernel: [ 222.429844] kjournald starting. Commit interval 5 seconds
Sep 29 09:54:07 siick-desktop kernel: [ 222.430125] EXT3 FS on sdb3, internal journal
Sep 29 09:54:07 siick-desktop kernel: [ 222.430131] EXT3-fs: mounted filesystem with ordered data mode.
Sep 29 09:54:07 siick-desktop kernel: [ 222.878092] ip_tables: (C) 2000-2006 Netfilter Core Team
Sep 29 09:54:07 siick-desktop kernel: [ 224.191227] ppdev: user-space parallel port driver
Sep 29 09:54:07 siick-desktop kernel: [ 224.331807] audit(1222674847.633:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5384 profile="/usr/sbin/cupsd" namespace="default"
Sep 29 09:54:10 siick-desktop kernel: [ 226.728397] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
Sep 29 09:54:10 siick-desktop dhcdbd: Started up.
Sep 29 09:54:14 siick-desktop kernel: [ 230.911548] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
Sep 29 09:54:14 siick-desktop kernel: [ 230.911555] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
Sep 29 09:54:14 siick-desktop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason
Sep 29 09:54:14 siick-desktop kernel: [ 231.484106] Bluetooth: Core ver 2.11
Sep 29 09:54:14 siick-desktop kernel: [ 231.484191] NET: Registered protocol family 31
Sep 29 09:54:14 siick-desktop kernel: [ 231.484193] Bluetooth: HCI device and connection manager initialized
Sep 29 09:54:14 siick-desktop kernel: [ 231.484197] Bluetooth: HCI socket layer initialized
Sep 29 09:54:14 siick-desktop kernel: [ 231.507640] Bluetooth: L2CAP ver 2.9
Sep 29 09:54:14 siick-desktop kernel: [ 231.507645] Bluetooth: L2CAP socket layer initialized
Sep 29 09:54:15 siick-desktop kernel: [ 231.886594] Bluetooth: RFCOMM socket layer initialized
Sep 29 09:54:15 siick-desktop kernel: [ 231.886609] Bluetooth: RFCOMM TTY layer initialized
Sep 29 09:54:15 siick-desktop kernel: [ 231.886611] Bluetooth: RFCOMM ver 1.8
Sep 29 09:54:16 siick-desktop kernel: [ 233.132779] NET: Registered protocol family 17
Sep 29 09:54:18 siick-desktop kernel: [ 234.822817] NET: Registered protocol family 10
Sep 29 09:54:18 siick-desktop kernel: [ 234.823027] lo: Disabled Privacy Extensions
Sep 29 09:54:19 siick-desktop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.host_name
Sep 29 09:54:19 siick-desktop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_domain
Sep 29 09:54:19 siick-desktop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_servers
Sep 29 09:54:19 siick-desktop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.interface_mtu
Sep 29 09:55:03 siick-desktop pulseaudio[6188]: alsa-util.c: Device hw:1 doesn't support 44100 Hz, changed to 48000 Hz.
Sep 29 09:55:03 siick-desktop pulseaudio[6188]: alsa-util.c: Cannot find fallback mixer control "Mic".
Sep 29 09:55:03 siick-desktop pulseaudio[6188]: alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 16000 Hz.
Sep 29 09:55:03 siick-desktop pulseaudio[6188]: alsa-util.c: Device hw:2 doesn't support 2 channels, changed to 1.
Sep 29 09:55:14 siick-desktop kernel: [ 267.665151] UDF-fs: No VRS foundHave fun et merci encore ^^
Siick d(o-0)b
Cliketi Free Netlabel
Xubuntu 16.04
Hors ligne
#9 Le 29/09/2008, à 11:53
- kerherno
Re : Bureau qui ne répond plus!!!
Bonjour,
Peut-être dû à compiz, qui galère un peu avec le dualview
Je te renvoi vers ce post http://forum.ubuntu-fr.org/viewtopic.php?id=224234 qui résoudra peut-être ton problème.
Salutations,
Hors ligne
#10 Le 29/09/2008, à 13:35
- siick
Re : Bureau qui ne répond plus!!!
Le truc c'est que j'ai toujours eu un dualView, j'ai juste changé d'écran. Et avant tout fonctionnait nickel.
Siick d(o-0)b
Cliketi Free Netlabel
Xubuntu 16.04
Hors ligne
#11 Le 29/09/2008, à 13:36
- siick
Re : Bureau qui ne répond plus!!!
Gangsta Cat a écrit :
Bonjour,
Peut-être dû à compiz, qui galère un peu avec le dualview
Je te renvoi vers ce post http://forum.ubuntu-fr.org/viewtopic.php?id=224234 qui résoudra peut-être ton problème.
Salutations,
Je n'ai aucun problème de ralentissement des menus. C'est juste mon bureau qui est comme 'figé'.
Siick d(o-0)b
Cliketi Free Netlabel
Xubuntu 16.04
Hors ligne
#12 Le 30/09/2008, à 22:16
- Hibountu
Re : Bureau qui ne répond plus!!!
T'aurais pas fait une mise à jour non-officielle de network-manager par hasard? Car moi oui, et ce sont exactement les mêmes symptômes...:P
Un journal d'actualité internationale qui voit loin : www.lepanoptique.com
Hors ligne
#13 Le 30/09/2008, à 23:32
- Mr G
Re : Bureau qui ne répond plus!!!
Haaaaaa serait-ce la aussi mon probleme ???
Cfr mon post :
http://forum.ubuntu-fr.org/viewtopic.php?id=256002
Desktop: Athlon XP 3000+, Nvidia 6600GT 128Mo, 1Go de ram, HDD 80+250Go, Hardy + XP
Media Center : Media-portal sous Xp P4 3Ghz - 1GRam : HDD 40+250Go
Laptop: Fujitsu Siemens Li 1718 - Vista Premium (boulot)
Hors ligne
#14 Le 01/10/2008, à 07:51
- siick
Re : Bureau qui ne répond plus!!!
Pas de Maj de network-manager non officiel. non.
J'avais fait une install de screenlet avant mais je l'ai désactivé (pas désinstall) car ça ramait un poil.
Siick d(o-0)b
Cliketi Free Netlabel
Xubuntu 16.04
Hors ligne
#15 Le 01/10/2008, à 08:02
- siick
Re : Bureau qui ne répond plus!!!
Même désinstallé, le problème persiste....
Siick d(o-0)b
Cliketi Free Netlabel
Xubuntu 16.04
Hors ligne
#16 Le 01/10/2008, à 08:05
- siick
Re : Bureau qui ne répond plus!!!
Mr G a écrit :
Haaaaaa serait-ce la aussi mon probleme ???
Cfr mon post :
http://forum.ubuntu-fr.org/viewtopic.php?id=256002
Dans le style..... Pour moi tout démarre bien, seulement le bureau et seulement le bureau est figé.
Un Ctrl+Alt+Backspace me fait même perdre mes icônes, je retrouve ensuite un bureau vierge!! Alors que mon dossier desktop contient bien mes liens!!!
Siick d(o-0)b
Cliketi Free Netlabel
Xubuntu 16.04
Hors ligne
#17 Le 02/10/2008, à 09:31
- costa07
Re : Bureau qui ne répond plus!!!
Je ne sais pas si ca peut aider
http://forum.ubuntu-fr.org/viewtopic.php?id=255878
Hors ligne
#18 Le 02/10/2008, à 09:57
- siick
Re : Bureau qui ne répond plus!!!
J'ai désinstall NetworkManager et install wicd (qui a l'air pas mal dite moi) mais rien n'y fait
Siick d(o-0)b
Cliketi Free Netlabel
Xubuntu 16.04
Hors ligne
#19 Le 18/10/2008, à 19:16
- jccochez
Re : Bureau qui ne répond plus!!!
tu parles d'ibex, peut etre que ca va règler ton probleme.
Pour m'a part ca a carément foiré gnome avec la beta
There'll always be a light, even in the darkest darkness
Hors ligne
#20 Le 19/10/2008, à 10:36
- amarys
Re : Bureau qui ne répond plus!!!
Tes icônes n'apparaissent plus, c'est ça ? Si c'est le cas, ça m'arrive aussi de temps en temps. Je ferme la session puis je la rouvre et c'est ok. Je ne sais pas pourquoi et je n'ai pas trouvé de soluce.
Hors ligne
#21 Le 19/10/2008, à 13:13
- siick
Re : Bureau qui ne répond plus!!!
Mes icônes sont là de temps en temps..... Quand ils sont là je ne peux pas les déplacer. Quand je change de fond d'écran seul le reboot de X me permet de l'appliquer!
Quand j'essaie des sélectionner plusieurs icônes sur le bureau je ne vois même pas le rectangle de sélection.
Bref mon bureau est comme gelé!
Siick d(o-0)b
Cliketi Free Netlabel
Xubuntu 16.04
Hors ligne
#22 Le 23/10/2008, à 13:50
- siick
Re : Bureau qui ne répond plus!!!
Si cela peux vous aider quand je me loggue sur kde4 c'est pire!
Fond blanc, aucun icones, pas de widgets.
Je ne peux pas changer l'arrière plan il reste blanc.
Siick d(o-0)b
Cliketi Free Netlabel
Xubuntu 16.04
Hors ligne
#23 Le 10/11/2008, à 23:42
- siick
Re : Bureau qui ne répond plus!!!
Le problème vient apparemment des drivers Nvidia.
Quand je suis sur un seul écran, pas de problème.
Double écran en Twinview, Les symptômes réapparaissent....
Siick d(o-0)b
Cliketi Free Netlabel
Xubuntu 16.04
Hors ligne
#24 Le 11/11/2008, à 00:04
- Snake046
Re : Bureau qui ne répond plus!!!
Tu sais que pour upper sans abuser, tu peux supprimer ton précédent up et renvoyer un nouveau message ?
Non ? Bah maintenant tu sais.
Aucun message n'est caché dans cette signature.
Hors ligne
#25 Le 11/11/2008, à 21:34
- siick
Re : Bureau qui ne répond plus!!!
Je sais........ fallait juste prendre le temps..........
Siick d(o-0)b
Cliketi Free Netlabel
Xubuntu 16.04
Hors ligne
Pages : 1