Contenu | Rechercher | Menus

Annonce

La nouvelle clé USB Ubuntu-fr est en prévente
Rendez-vous sur la boutique En Vente Libre

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 27/12/2018, à 23:55

Yann0

Freezes récurrents après bidouillage avec mes drivers graphiques

Bonjour à tous et merci d'avance pour votre aide,

Je suis actuellement sur un Ubuntu 18.04 avec Gnome, et je rencontre des problèmes avec le driver Nouveau et avec mes drivers Nvidia. J'ai installé mon Ubuntu il y a quelques mois sur un PC qui était vierge au début. Je n'avais pas pris la peine de passer sur ma carte graphique NVIDIA GTX 970 jusqu'à présent car je n'en avait pas l'utilité. Tout tournait bien avec Nouveau, et récemment je me suis dit que j'allais changer de drivers pour pouvoir utiliser ma CG.

En essayant d'installer les drivers NVIDIA, on m'a proposé quatre versions :

 ~$ ubuntu-drivers devices
== /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0 ==
modalias : pci:v000010DEd000013C2sv000010B0sd000013C2bc03sc00i00
vendor   : NVIDIA Corporation
model    : GM204 [GeForce GTX 970]
driver   : nvidia-driver-390 - third-party free
driver   : nvidia-driver-415 - third-party free recommended
driver   : nvidia-driver-396 - third-party free
driver   : nvidia-driver-410 - third-party free
driver   : xserver-xorg-video-nouveau - distro free builtin 

Les quatre me donnent le même résultat : un seul de mes trois écrans est détecté, et la résolution n'est pas la bonne. Voici ce que me donne xrandr :

 ~$ xrandr
Screen 0: minimum 320 x 200, current 5520 x 1200, maximum 16384 x 16384
DVI-I-1 connected 1680x1050+0+46 (normal left inverted right x axis y axis) 473mm x 296mm
   1680x1050     59.95*+
   1600x1200     60.00  
   1280x1024     75.02    60.02  
   1440x900      74.98    59.89  
   1280x800      59.81  
   1152x864      75.00  
   1024x768      75.03    70.07    60.00  
   832x624       74.55  
   800x600       72.19    75.00    60.32    56.25  
   640x480       75.00    72.81    66.67    59.94  
   720x400       70.08  
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 connected 1920x1200+3600+0 (normal left inverted right x axis y axis) 518mm x 324mm
   1920x1200     59.95*+
   1920x1080     60.00    60.00    50.00    50.00    50.00    59.94  
   1920x1080i    60.00    50.00    59.94  
   1600x1200     60.00  
   1680x1050     59.95  
   1280x1024     75.02    72.05    60.02  
   1440x900      74.98    59.89  
   1280x720      60.00    50.00    59.94  
   1024x768      75.03    70.07    60.00  
   800x600       72.19    75.00    60.32  
   720x576       50.00  
   720x480       60.00    59.94  
   640x480       75.00    72.81    66.03    60.00    59.94  
   720x400       70.08  
DP-3 disconnected (normal left inverted right x axis y axis)
HDMI-1 connected primary 1920x1080+1680+46 (normal left inverted right x axis y axis) 531mm x 299mm
   1920x1080     60.00*+  50.00    59.94    24.00    23.98  
   1920x1080i    60.00    50.00    59.94  
   1280x1024     75.02    60.02  
   1440x900     119.85    59.90  
   1280x720      60.00    50.00    59.94  
   1024x768     119.99    75.03    60.00  
   800x600      119.97    75.00    60.32  
   720x576       50.00  
   720x480       60.00    59.94  
   640x480      119.99    75.00    72.81    66.67    60.00    59.94  
   720x400       70.08  

J'ai essayé pas mal de solutions. J'ai tenté de blacklister nouveau (ce que je pense avoir inversé vu que nouveau se boot bien, voir ci-dessous), j'ai aussi tenté d'installer le driver via le .run obtenu à partir du site de nvidia, sans succès. Aussi, quand ma machine se bootait avec un driver nvidia sélectionné dans "Additional Drivers" de "Software & Updates", je n'arrivais pas à lancer nvidia-settings : il semblerait que malgré mon installation, ma machine n'arrivait pas à charger les drivers nvidia.

 ~$ lsmod | grep nouveau
nouveau              1716224  15
mxm_wmi                16384  1 nouveau
i2c_algo_bit           16384  1 nouveau
ttm                   106496  1 nouveau
drm_kms_helper        172032  1 nouveau
drm                   401408  18 drm_kms_helper,ttm,nouveau
wmi                    24576  4 asus_wmi,wmi_bmof,mxm_wmi,nouveau
video                  45056  2 asus_wmi,nouveau 

Je suis actuellement de retour avec nouveau sauf qu'il ne fonctionne plus correctement. Dès que je fais des actions un peu demandeuses graphiquement (afficher des images, lire une vidéo) il freeze au bout d'un certain moment (c'est variable). Les logs ne semblent pas indiquer quoi que ce soit d'alarmant. Le son continue d'être joué en malgré les freezes vidéos.

logs importants (ici le freeze a eu lieu autour de 20h56) :

0:28:28 pulseaudio: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.TimedOut: Failed to activate service 'org.bluez': timed out (service_start_timeout=25000ms)
20:28:15 spice-vdagent: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
20:28:02 kernel: usb 3-14: 1:1: cannot get freq at ep 0x81
20:28:02 wpa_supplicant: dbus: Failed to construct signal
20:28:00 kernel: usb 3-14: 2:1: cannot get freq at ep 0x1
20:28:00 kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT4._GTF, AE_NOT_FOUND (20170831/psparse-550)
20:28:00 kernel: nouveau 0000:01:00.0: bus: MMIO write of 80000165 FAULT at 10eb14 [ IBUS ]
20:28:00 kernel: Couldn't get size: 0x800000000000000e

logs hardware :

 20:28:02 kernel: usb 3-14: 1:1: cannot get freq at ep 0x81
20:28:00 kernel: ath9k 0000:05:00.0 wlp5s0: renamed from wlan0
20:28:00 kernel: ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffff9d86c2ce0000, irq=18
20:28:00 kernel: usb 3-14: [11] FU [Sidetone Playback Volume] ch = 1, val = 0/4096/1
20:28:00 kernel: ath9k 0000:05:00.0: enabling device (0000 -> 0002)
20:28:00 kernel: snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
20:28:00 kernel: usb 3-14: 2:1: cannot get freq at ep 0x1
20:28:00 kernel: snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
20:28:00 kernel: sd 6:0:0:0: [sde] Attached SCSI removable disk
20:28:00 kernel: scsi 6:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9451 PQ: 0 ANSI: 0
20:28:00 kernel: hid-generic 0003:0951:16A4.0007: input,hiddev1,hidraw6: USB HID v1.11 Device [Kingston HyperX 7.1 Audio] on usb-0000:00:14.0-14/input3
20:28:00 kernel: scsi host6: usb-storage 3-6:1.0
20:28:00 kernel: usb-storage 3-6:1.0: Quirks match for vid 05e3 pid 0723: 8000
20:28:00 kernel: usb 3-14: SerialNumber: 00000000
20:28:00 kernel: nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
20:28:00 kernel: usb 3-10: new full-speed USB device number 4 using xhci_hcd
20:28:00 kernel: sd 2:0:0:0: [sdb] Attached SCSI disk
20:28:00 kernel: scsi 5:0:0:0: Direct-Access     ATA      WDC WD2003FZEX-0 1A01 PQ: 0 ANSI: 5
20:28:00 kernel: sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
20:28:00 kernel: scsi 4:0:0:0: Direct-Access     ATA      Samsung SSD 850  1B6Q PQ: 0 ANSI: 5
20:28:00 kernel: sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
20:28:00 kernel: scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABB2 0U   PQ: 0 ANSI: 5
20:28:00 kernel: sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
20:28:00 kernel: scsi 1:0:0:0: Direct-Access     ATA      ST3500820AS      SD15 PQ: 0 ANSI: 5
20:28:00 kernel: sr 0:0:0:0: Attached scsi generic sg0 type 5
20:28:00 kernel: usb 3-9: Manufacturer: KYE Systems Corp
20:28:00 kernel: scsi 0:0:0:0: CD-ROM            ATAPI    iHAS124   F      CL05 PQ: 0 ANSI: 5
20:28:00 kernel: nouveau 0000:01:00.0: DRM: MM: using COPY for buffer copies
20:28:00 kernel: usb 3-9: new full-speed USB device number 3 using xhci_hcd
20:28:00 kernel: nouveau 0000:01:00.0: DRM: Virtual-1 has no encoders, removing
20:28:00 kernel: e1000e 0000:00:19.0 eno1: renamed from eth0
20:28:00 kernel: nouveau 0000:01:00.0: DRM: DCB conn 05: 00000570
20:28:00 kernel: hub 2-1:1.0: 8 ports detected
20:28:00 kernel: usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
20:28:00 kernel: hub 1-1:1.0: 6 ports detected
20:28:00 kernel: usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
20:28:00 kernel: e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
20:28:00 kernel: nouveau 0000:01:00.0: bus: MMIO write of 80000165 FAULT at 10eb14 [ IBUS ]
20:28:00 kernel: e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
20:28:00 kernel: scsi host5: ahci
20:28:00 kernel: nouveau 0000:01:00.0: NVIDIA GM204 (124020a1)
20:28:00 kernel: ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
20:28:00 kernel: usb 3-6: new high-speed USB device number 2 using xhci_hcd
20:28:00 kernel: i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
20:28:00 kernel: usb 2-1: new high-speed USB device number 2 using ehci-pci
20:28:00 kernel: rtc_cmos 00:02: setting system clock to 2018-12-27 19:27:57 UTC (1545938877)
20:28:00 kernel: hub 4-0:1.0: 6 ports detected
20:28:00 kernel: usb usb4: SerialNumber: 0000:00:14.0
20:28:00 kernel: xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
20:28:00 kernel: hub 3-0:1.0: 14 ports detected
20:28:00 kernel: usb usb3: SerialNumber: 0000:00:14.0
20:28:00 kernel: xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
20:28:00 kernel: hub 2-0:1.0: 2 ports detected
20:28:00 kernel: usb usb2: SerialNumber: 0000:00:1d.0
20:28:00 kernel: ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
20:28:00 kernel: hub 1-0:1.0: 2 ports detected
20:28:00 kernel: usb usb1: SerialNumber: 0000:00:1a.0
20:28:00 kernel: ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
20:28:00 kernel: thermal LNXTHERM:01: registered as thermal_zone1
20:28:00 kernel: pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
20:28:00 kernel: pci_bus 0000:05: resource 1 [mem 0xdf100000-0xdf1fffff]
20:28:00 kernel: pci 0000:00:1c.6:   bridge window [mem 0xdf100000-0xdf1fffff]
20:28:00 kernel: system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
20:28:00 kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
20:28:00 kernel: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
20:28:00 kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
20:28:00 kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
20:28:00 kernel: pci 0000:01:00.0: vgaarb: bridge control possible
20:28:00 kernel: pci_bus 0000:00: root bus resource [bus 00-fe]
20:28:00 kernel: acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration 

logs système :

 21:56:25 kernel: [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:fb:18:1e:78:e6:bd:a7:08:00 SRC=192.168.0.2 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 
21:45:31 kernel: audit: type=1326 audit(1545943531.504:55): auid=1000 uid=1000 gid=1000 ses=2 pid=3567 comm="caprine" exe="/snap/caprine/10/caprine" sig=0 arch=c000003e syscall=92 compat=0 ip=0x7f8ffb46a307 code=0x50000
21:45:28 kernel: kauditd_printk_skb: 42 callbacks suppressed
21:43:49 kernel: [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:fb:70:26:05:37:95:9a:08:00 SRC=192.168.0.11 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0xC0 TTL=1 ID=0 DF PROTO=2 
20:33:45 kernel: Lockdown: debugfs is restricted; see man kernel_lockdown.7
20:32:24 kernel: [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:01:d0:84:b0:f5:fa:54:08:00 SRC=192.168.0.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 PROTO=2 
20:28:45 kernel: nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
20:28:39 kernel: [UFW BLOCK] IN=wlp5s0 OUT= MAC=e8:de:27:0c:17:de:d0:84:b0:f5:fa:54:08:00 SRC=179.60.192.7 DST=192.168.0.21 LEN=91 TOS=0x00 PREC=0x00 TTL=86 ID=19147 DF PROTO=TCP SPT=443 DPT=32948 WINDOW=177 RES=0x00 ACK PSH FIN URGP=0 
20:28:15 kernel: rfkill: input handler disabled
20:28:12 kernel: [UFW BLOCK] IN=wlp5s0 OUT= MAC=01:00:5e:00:00:fb:68:14:01:23:e2:ad:08:00 SRC=192.168.0.26 DST=224.0.0.251 LEN=32 TOS=0x00 PREC=0x00 TTL=1 ID=25046 PROTO=2 
20:28:05 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
20:28:05 kernel: wlp5s0: associated
20:28:03 kernel: input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input19
20:28:02 kernel: usb 3-14: 1:1: cannot get freq at ep 0x81
20:28:02 kernel: IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
20:28:01 kernel: audit: type=1400 audit(1545938881.587:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1004 comm="apparmor_parser"
20:28:00 kernel: ath9k 0000:05:00.0 wlp5s0: renamed from wlan0
20:28:00 kernel: intel_rapl: Found RAPL domain dram
20:28:00 kernel: ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffff9d86c2ce0000, irq=18
20:28:00 kernel: ath: Regpair used: 0x21
20:28:00 kernel: usbcore: registered new interface driver snd-usb-audio
20:28:00 kernel: input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
20:28:00 kernel: usb 3-14: [11] FU [Sidetone Playback Volume] ch = 1, val = 0/4096/1
20:28:00 kernel: ath9k 0000:05:00.0: enabling device (0000 -> 0002)
20:28:00 kernel: AES CTR mode by8 optimization enabled
20:28:00 kernel: AVX2 version of gcm_enc/dec engaged.
20:28:00 kernel: snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
20:28:00 kernel: usb 3-14: 2:1: cannot get freq at ep 0x1
20:28:00 kernel: snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
20:28:00 kernel: RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
20:28:00 kernel: asus_wmi: Number of fans: 1
20:28:00 kernel: input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input8
20:28:00 kernel: asus_wmi: SFUN value: 0x0
20:28:00 kernel: cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
20:28:00 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
20:28:00 kernel: lpc_ich: Resource conflict(s) found affecting gpio_ich
20:28:00 kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
20:28:00 kernel: ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\_GPE.GPBX) (20170831/utaddress-247)
20:28:00 kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
20:28:00 kernel: ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\_GPE.GPBX) (20170831/utaddress-247)
20:28:00 kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
20:28:00 kernel: ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C7F (\_GPE.GPBX) (20170831/utaddress-247)
20:28:00 kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
20:28:00 kernel: ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170831/utaddress-247)
20:28:00 kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
20:28:00 kernel: nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
20:28:00 kernel: Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 across:2260988k SSFS
20:28:00 kernel: random: 7 urandom warning(s) missed due to ratelimiting
20:28:00 kernel: ppdev: user-space parallel port driver
20:28:00 kernel: lp: driver loaded but no devices found
20:28:00 kernel: EXT4-fs (sdc2): re-mounted. Opts: errors=remount-ro 

Maintenant comme demandé le /var/log/Xorg.0.log :

~$ cat /var/log/Xorg.0.log
[     5.413] (--) Log file renamed from "/var/log/Xorg.pid-1285.log" to "/var/log/Xorg.0.log"
[     5.413] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[     5.413] X Protocol Version 11, Revision 0
[     5.413] Build Operating System: Linux 4.4.0-138-generic x86_64 Ubuntu
[     5.413] Current Operating System: Linux casper 4.15.0-43-generic #46-Ubuntu SMP Thu Dec 6 14:45:28 UTC 2018 x86_64
[     5.413] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-43-generic root=UUID=5bfae9f6-6567-4fe4-97ec-39e0dac90e36 ro quiet splash vt.handoff=1
[     5.413] Build Date: 25 October 2018  04:11:27PM
[     5.413] xorg-server 2:1.19.6-1ubuntu4.2 (For technical support please see http://www.ubuntu.com/support) 
[     5.413] Current version of pixman: 0.34.0
[     5.413] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     5.413] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     5.413] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 27 00:05:26 2018
[     5.413] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     5.413] (==) No Layout section.  Using the first Screen section.
[     5.413] (==) No screen section available. Using defaults.
[     5.413] (**) |-->Screen "Default Screen Section" (0)
[     5.413] (**) |   |-->Monitor "<default monitor>"
[     5.413] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     5.413] (==) Automatically adding devices
[     5.413] (==) Automatically enabling devices
[     5.413] (==) Automatically adding GPU devices
[     5.413] (==) Automatically binding GPU devices
[     5.413] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     5.413] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[     5.413] 	Entry deleted from font path.
[     5.413] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[     5.413] 	Entry deleted from font path.
[     5.413] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[     5.413] 	Entry deleted from font path.
[     5.413] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[     5.413] 	Entry deleted from font path.
[     5.413] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[     5.413] 	Entry deleted from font path.
[     5.413] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[     5.413] (==) ModulePath set to "/usr/lib/xorg/modules"
[     5.413] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     5.413] (II) Loader magic: 0x564e00f11020
[     5.413] (II) Module ABI versions:
[     5.413] 	X.Org ANSI C Emulation: 0.4
[     5.413] 	X.Org Video Driver: 23.0
[     5.413] 	X.Org XInput driver : 24.1
[     5.414] 	X.Org Server Extension : 10.0
[     5.414] (++) using VT number 1

[     5.415] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[     5.416] (--) PCI:*(0:1:0:0) 10de:13c2:10b0:13c2 rev 161, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[     5.416] (II) LoadModule: "glx"
[     5.416] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     5.416] (II) Module glx: vendor="X.Org Foundation"
[     5.416] 	compiled for 1.19.6, module version = 1.0.0
[     5.416] 	ABI class: X.Org Server Extension, version 10.0
[     5.416] (==) Matched nouveau as autoconfigured driver 0
[     5.416] (==) Matched modesetting as autoconfigured driver 1
[     5.416] (==) Matched fbdev as autoconfigured driver 2
[     5.416] (==) Matched vesa as autoconfigured driver 3
[     5.416] (==) Assigned the driver to the xf86ConfigLayout
[     5.416] (II) LoadModule: "nouveau"
[     5.416] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[     5.417] (II) Module nouveau: vendor="X.Org Foundation"
[     5.417] 	compiled for 1.19.3, module version = 1.0.15
[     5.417] 	Module class: X.Org Video Driver
[     5.417] 	ABI class: X.Org Video Driver, version 23.0
[     5.417] (II) LoadModule: "modesetting"
[     5.417] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     5.417] (II) Module modesetting: vendor="X.Org Foundation"
[     5.417] 	compiled for 1.19.6, module version = 1.19.6
[     5.417] 	Module class: X.Org Video Driver
[     5.417] 	ABI class: X.Org Video Driver, version 23.0
[     5.417] (II) LoadModule: "fbdev"
[     5.417] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[     5.417] (II) Module fbdev: vendor="X.Org Foundation"
[     5.417] 	compiled for 1.19.3, module version = 0.4.4
[     5.417] 	Module class: X.Org Video Driver
[     5.417] 	ABI class: X.Org Video Driver, version 23.0
[     5.417] (II) LoadModule: "vesa"
[     5.417] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     5.417] (II) Module vesa: vendor="X.Org Foundation"
[     5.417] 	compiled for 1.19.3, module version = 2.3.4
[     5.417] 	Module class: X.Org Video Driver
[     5.417] 	ABI class: X.Org Video Driver, version 23.0
[     5.417] (II) NOUVEAU driver Date:   Fri Apr 21 14:41:17 2017 -0400
[     5.417] (II) NOUVEAU driver for NVIDIA chipset families :
[     5.417] 	RIVA TNT        (NV04)
[     5.417] 	RIVA TNT2       (NV05)
[     5.417] 	GeForce 256     (NV10)
[     5.417] 	GeForce 2       (NV11, NV15)
[     5.417] 	GeForce 4MX     (NV17, NV18)
[     5.417] 	GeForce 3       (NV20)
[     5.417] 	GeForce 4Ti     (NV25, NV28)
[     5.417] 	GeForce FX      (NV3x)
[     5.417] 	GeForce 6       (NV4x)
[     5.417] 	GeForce 7       (G7x)
[     5.417] 	GeForce 8       (G8x)
[     5.417] 	GeForce GTX 200 (NVA0)
[     5.417] 	GeForce GTX 400 (NVC0)
[     5.417] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     5.417] (II) FBDEV: driver for framebuffer: fbdev
[     5.417] (II) VESA: driver for VESA chipsets: vesa
[     5.417] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[     5.536] (EE) [drm] Failed to open DRM device for pci:0000:01:00.0: -19
[     5.536] (EE) open /dev/dri/card0: No such file or directory
[     5.536] (WW) Falling back to old probe method for modesetting
[     5.536] (EE) open /dev/dri/card0: No such file or directory
[     5.536] (II) Loading sub module "fbdevhw"
[     5.536] (II) LoadModule: "fbdevhw"
[     5.537] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[     5.537] (II) Module fbdevhw: vendor="X.Org Foundation"
[     5.537] 	compiled for 1.19.6, module version = 0.0.2
[     5.537] 	ABI class: X.Org Video Driver, version 23.0
[     5.537] (**) FBDEV(1): claimed PCI slot 1@0:0:0
[     5.537] (II) FBDEV(1): using default device
[     5.537] (WW) Falling back to old probe method for vesa
[     5.537] (EE) Screen 0 deleted because of no matching config section.
[     5.537] (II) UnloadModule: "modesetting"
[     5.537] (II) FBDEV(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     5.537] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[     5.537] (==) FBDEV(0): RGB weight 888
[     5.537] (==) FBDEV(0): Default visual is TrueColor
[     5.537] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[     5.537] (II) FBDEV(0): hardware: EFI VGA (video memory: 1200kB)
[     5.537] (II) FBDEV(0): checking modes against framebuffer device...
[     5.537] (II) FBDEV(0): checking modes against monitor...
[     5.537] (--) FBDEV(0): Virtual size is 640x480 (pitch 640)
[     5.537] (**) FBDEV(0):  Built-in mode "current": 30.7 MHz, 36.9 kHz, 73.3 Hz
[     5.537] (II) FBDEV(0): Modeline "current"x0.0   30.72  640 672 752 832  480 484 488 504 -hsync -vsync -csync (36.9 kHz b)
[     5.537] (==) FBDEV(0): DPI set to (96, 96)
[     5.537] (II) Loading sub module "fb"
[     5.537] (II) LoadModule: "fb"
[     5.537] (II) Loading /usr/lib/xorg/modules/libfb.so
[     5.537] (II) Module fb: vendor="X.Org Foundation"
[     5.537] 	compiled for 1.19.6, module version = 1.0.0
[     5.537] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.537] (**) FBDEV(0): using shadow framebuffer
[     5.537] (II) Loading sub module "shadow"
[     5.537] (II) LoadModule: "shadow"
[     5.537] (II) Loading /usr/lib/xorg/modules/libshadow.so
[     5.537] (II) Module shadow: vendor="X.Org Foundation"
[     5.537] 	compiled for 1.19.6, module version = 1.1.0
[     5.537] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     5.537] (II) UnloadModule: "vesa"
[     5.537] (II) Unloading vesa
[     5.537] (==) Depth 24 pixmap format is 32 bpp
[     5.537] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[     5.538] (==) FBDEV(0): Backing store enabled
[     5.538] (==) FBDEV(0): DPMS enabled
[     5.538] (==) RandR enabled
[     5.540] (II) SELinux: Disabled on system
[     5.540] (II) AIGLX: Screen 0 is not DRI2 capable
[     5.540] (EE) AIGLX: reverting to software rendering
[     5.580] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
[     5.581] (II) IGLX: Loaded and initialized swrast
[     5.581] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[     5.601] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[     5.601] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     5.601] (II) LoadModule: "libinput"
[     5.601] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     5.602] (II) Module libinput: vendor="X.Org Foundation"
[     5.602] 	compiled for 1.19.6, module version = 0.27.1
[     5.602] 	Module class: X.Org XInput Driver
[     5.602] 	ABI class: X.Org XInput driver, version 24.1
[     5.602] (II) Using input driver 'libinput' for 'Power Button'
[     5.602] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 22 paused 0
[     5.602] (**) Power Button: always reports core events
[     5.602] (**) Option "Device" "/dev/input/event1"
[     5.603] (**) Option "_source" "server/udev"
[     5.603] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     5.603] (II) event1  - Power Button: device is a keyboard
[     5.603] (II) event1  - Power Button: device removed
[     5.603] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[     5.603] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     5.603] (**) Option "xkb_model" "pc105"
[     5.603] (**) Option "xkb_layout" "fr"
[     5.612] (II) event1  - Power Button: is tagged by udev as: Keyboard
[     5.612] (II) event1  - Power Button: device is a keyboard
[     5.612] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[     5.612] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     5.612] (II) Using input driver 'libinput' for 'Power Button'
[     5.613] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 25 paused 0
[     5.613] (**) Power Button: always reports core events
[     5.613] (**) Option "Device" "/dev/input/event0"
[     5.613] (**) Option "_source" "server/udev"
[     5.613] (II) event0  - Power Button: is tagged by udev as: Keyboard
[     5.613] (II) event0  - Power Button: device is a keyboard
[     5.613] (II) event0  - Power Button: device removed
[     5.613] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[     5.613] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[     5.613] (**) Option "xkb_model" "pc105"
[     5.613] (**) Option "xkb_layout" "fr"
[     5.614] (II) event0  - Power Button: is tagged by udev as: Keyboard
[     5.614] (II) event0  - Power Button: device is a keyboard
[     5.614] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[     5.614] (II) No input driver specified, ignoring this device.
[     5.614] (II) This device may have been added with another device file.
[     5.614] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[     5.614] (II) No input driver specified, ignoring this device.
[     5.614] (II) This device may have been added with another device file.
[     5.614] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event18)
[     5.614] (II) No input driver specified, ignoring this device.
[     5.614] (II) This device may have been added with another device file.
[     5.614] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event19)
[     5.614] (II) No input driver specified, ignoring this device.
[     5.614] (II) This device may have been added with another device file.
[     5.615] (II) config/udev: Adding input device Razer Razer Anansi (/dev/input/event4)
[     5.615] (**) Razer Razer Anansi: Applying InputClass "libinput keyboard catchall"
[     5.615] (II) Using input driver 'libinput' for 'Razer Razer Anansi'
[     5.615] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 26 paused 0
[     5.615] (**) Razer Razer Anansi: always reports core events
[     5.615] (**) Option "Device" "/dev/input/event4"
[     5.615] (**) Option "_source" "server/udev"
[     5.616] (II) event4  - Razer Razer Anansi: is tagged by udev as: Keyboard
[     5.616] (II) event4  - Razer Razer Anansi: device is a keyboard
[     5.616] (II) event4  - Razer Razer Anansi: device removed
[     5.616] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:1532:010F.0004/input/input4/event4"
[     5.616] (II) XINPUT: Adding extended input device "Razer Razer Anansi" (type: KEYBOARD, id 8)
[     5.616] (**) Option "xkb_model" "pc105"
[     5.616] (**) Option "xkb_layout" "fr"
[     5.616] (II) event4  - Razer Razer Anansi: is tagged by udev as: Keyboard
[     5.616] (II) event4  - Razer Razer Anansi: device is a keyboard
[     5.616] (II) config/udev: Adding input device Razer Razer Anansi (/dev/input/event5)
[     5.616] (**) Razer Razer Anansi: Applying InputClass "libinput keyboard catchall"
[     5.616] (II) Using input driver 'libinput' for 'Razer Razer Anansi'
[     5.617] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 27 paused 0
[     5.617] (**) Razer Razer Anansi: always reports core events
[     5.617] (**) Option "Device" "/dev/input/event5"
[     5.617] (**) Option "_source" "server/udev"
[     5.617] (II) event5  - Razer Razer Anansi: is tagged by udev as: Keyboard
[     5.617] (II) event5  - Razer Razer Anansi: device is a keyboard
[     5.617] (II) event5  - Razer Razer Anansi: device removed
[     5.617] (II) libinput: Razer Razer Anansi: needs a virtual subdevice
[     5.617] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.1/0003:1532:010F.0005/input/input5/event5"
[     5.617] (II) XINPUT: Adding extended input device "Razer Razer Anansi" (type: MOUSE, id 9)
[     5.617] (**) Option "AccelerationScheme" "none"
[     5.617] (**) Razer Razer Anansi: (accel) selected scheme none/0
[     5.617] (**) Razer Razer Anansi: (accel) acceleration factor: 2.000
[     5.617] (**) Razer Razer Anansi: (accel) acceleration threshold: 4
[     5.618] (II) event5  - Razer Razer Anansi: is tagged by udev as: Keyboard
[     5.618] (II) event5  - Razer Razer Anansi: device is a keyboard
[     5.618] (II) config/udev: Adding input device Razer Razer Anansi (/dev/input/event6)
[     5.618] (**) Razer Razer Anansi: Applying InputClass "libinput pointer catchall"
[     5.618] (II) Using input driver 'libinput' for 'Razer Razer Anansi'
[     5.676] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 28 paused 0
[     5.676] (**) Razer Razer Anansi: always reports core events
[     5.676] (**) Option "Device" "/dev/input/event6"
[     5.676] (**) Option "_source" "server/udev"
[     5.676] (II) event6  - Razer Razer Anansi: is tagged by udev as: Mouse
[     5.676] (II) event6  - Razer Razer Anansi: device is a pointer
[     5.676] (II) event6  - Razer Razer Anansi: device removed
[     5.676] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.2/0003:1532:010F.0006/input/input6/event6"
[     5.676] (II) XINPUT: Adding extended input device "Razer Razer Anansi" (type: MOUSE, id 10)
[     5.676] (**) Option "AccelerationScheme" "none"
[     5.676] (**) Razer Razer Anansi: (accel) selected scheme none/0
[     5.676] (**) Razer Razer Anansi: (accel) acceleration factor: 2.000
[     5.676] (**) Razer Razer Anansi: (accel) acceleration threshold: 4
[     5.677] (II) event6  - Razer Razer Anansi: is tagged by udev as: Mouse
[     5.677] (II) event6  - Razer Razer Anansi: device is a pointer
[     5.677] (II) config/udev: Adding input device Razer Razer Anansi (/dev/input/mouse1)
[     5.677] (II) No input driver specified, ignoring this device.
[     5.677] (II) This device may have been added with another device file.
[     5.677] (II) config/udev: Adding input device Kingston HyperX 7.1 Audio (/dev/input/event7)
[     5.677] (**) Kingston HyperX 7.1 Audio: Applying InputClass "libinput keyboard catchall"
[     5.677] (II) Using input driver 'libinput' for 'Kingston HyperX 7.1 Audio'
[     5.678] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 29 paused 0
[     5.678] (**) Kingston HyperX 7.1 Audio: always reports core events
[     5.678] (**) Option "Device" "/dev/input/event7"
[     5.678] (**) Option "_source" "server/udev"
[     5.678] (II) event7  - Kingston HyperX 7.1 Audio: is tagged by udev as: Keyboard
[     5.678] (II) event7  - Kingston HyperX 7.1 Audio: device is a keyboard
[     5.678] (II) event7  - Kingston HyperX 7.1 Audio: device removed
[     5.678] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.3/0003:0951:16A4.0007/input/input7/event7"
[     5.678] (II) XINPUT: Adding extended input device "Kingston HyperX 7.1 Audio" (type: KEYBOARD, id 11)
[     5.678] (**) Option "xkb_model" "pc105"
[     5.678] (**) Option "xkb_layout" "fr"
[     5.679] (II) event7  - Kingston HyperX 7.1 Audio: is tagged by udev as: Keyboard
[     5.679] (II) event7  - Kingston HyperX 7.1 Audio: device is a keyboard
[     5.679] (II) config/udev: Adding input device KYE Systems Corp Scorpion M6-600 Gaming Mouse (/dev/input/event2)
[     5.679] (**) KYE Systems Corp Scorpion M6-600 Gaming Mouse: Applying InputClass "libinput pointer catchall"
[     5.679] (II) Using input driver 'libinput' for 'KYE Systems Corp Scorpion M6-600 Gaming Mouse'
[     5.736] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 30 paused 0
[     5.736] (**) KYE Systems Corp Scorpion M6-600 Gaming Mouse: always reports core events
[     5.736] (**) Option "Device" "/dev/input/event2"
[     5.736] (**) Option "_source" "server/udev"
[     5.736] (II) event2  - KYE Systems Corp Scorpion M6-600 Gaming Mouse: is tagged by udev as: Mouse
[     5.736] (II) event2  - KYE Systems Corp Scorpion M6-600 Gaming Mouse: device is a pointer
[     5.736] (II) event2  - KYE Systems Corp Scorpion M6-600 Gaming Mouse: device removed
[     5.736] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.0/0003:0458:0179.0001/input/input2/event2"
[     5.736] (II) XINPUT: Adding extended input device "KYE Systems Corp Scorpion M6-600 Gaming Mouse" (type: MOUSE, id 12)
[     5.736] (**) Option "AccelerationScheme" "none"
[     5.736] (**) KYE Systems Corp Scorpion M6-600 Gaming Mouse: (accel) selected scheme none/0
[     5.736] (**) KYE Systems Corp Scorpion M6-600 Gaming Mouse: (accel) acceleration factor: 2.000
[     5.736] (**) KYE Systems Corp Scorpion M6-600 Gaming Mouse: (accel) acceleration threshold: 4
[     5.736] (II) event2  - KYE Systems Corp Scorpion M6-600 Gaming Mouse: is tagged by udev as: Mouse
[     5.736] (II) event2  - KYE Systems Corp Scorpion M6-600 Gaming Mouse: device is a pointer
[     5.737] (II) config/udev: Adding input device KYE Systems Corp Scorpion M6-600 Gaming Mouse (/dev/input/mouse0)
[     5.737] (II) No input driver specified, ignoring this device.
[     5.737] (II) This device may have been added with another device file.
[     5.737] (II) config/udev: Adding input device KYE Systems Corp Scorpion M6-600 Gaming Mouse (/dev/input/event3)
[     5.737] (**) KYE Systems Corp Scorpion M6-600 Gaming Mouse: Applying InputClass "libinput keyboard catchall"
[     5.737] (II) Using input driver 'libinput' for 'KYE Systems Corp Scorpion M6-600 Gaming Mouse'
[     5.738] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 31 paused 0
[     5.738] (**) KYE Systems Corp Scorpion M6-600 Gaming Mouse: always reports core events
[     5.738] (**) Option "Device" "/dev/input/event3"
[     5.738] (**) Option "_source" "server/udev"
[     5.738] (II) event3  - KYE Systems Corp Scorpion M6-600 Gaming Mouse: is tagged by udev as: Keyboard
[     5.738] (II) event3  - KYE Systems Corp Scorpion M6-600 Gaming Mouse: device is a keyboard
[     5.738] (II) event3  - KYE Systems Corp Scorpion M6-600 Gaming Mouse: device removed
[     5.738] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9:1.2/0003:0458:0179.0003/input/input3/event3"
[     5.738] (II) XINPUT: Adding extended input device "KYE Systems Corp Scorpion M6-600 Gaming Mouse" (type: KEYBOARD, id 13)
[     5.738] (**) Option "xkb_model" "pc105"
[     5.738] (**) Option "xkb_layout" "fr"
[     5.738] (II) event3  - KYE Systems Corp Scorpion M6-600 Gaming Mouse: is tagged by udev as: Keyboard
[     5.738] (II) event3  - KYE Systems Corp Scorpion M6-600 Gaming Mouse: device is a keyboard
[     5.738] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)
[     5.738] (II) No input driver specified, ignoring this device.
[     5.738] (II) This device may have been added with another device file.
[     5.739] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event11)
[     5.739] (II) No input driver specified, ignoring this device.
[     5.739] (II) This device may have been added with another device file.
[     5.739] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event12)
[     5.739] (II) No input driver specified, ignoring this device.
[     5.739] (II) This device may have been added with another device file.
[     5.739] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event13)
[     5.739] (II) No input driver specified, ignoring this device.
[     5.739] (II) This device may have been added with another device file.
[     5.739] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event14)
[     5.739] (II) No input driver specified, ignoring this device.
[     5.739] (II) This device may have been added with another device file.
[     5.739] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event8)
[     5.739] (II) No input driver specified, ignoring this device.
[     5.739] (II) This device may have been added with another device file.
[     5.739] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event9)
[     5.739] (II) No input driver specified, ignoring this device.
[     5.739] (II) This device may have been added with another device file.
[     5.740] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event15)
[     5.740] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     5.740] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[     5.740] (II) systemd-logind: got fd for /dev/input/event15 13:79 fd 32 paused 0
[     5.740] (**) Eee PC WMI hotkeys: always reports core events
[     5.740] (**) Option "Device" "/dev/input/event15"
[     5.740] (**) Option "_source" "server/udev"
[     5.740] (II) event15 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[     5.740] (II) event15 - Eee PC WMI hotkeys: device is a keyboard
[     5.740] (II) event15 - Eee PC WMI hotkeys: device removed
[     5.741] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input15/event15"
[     5.741] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 14)
[     5.741] (**) Option "xkb_model" "pc105"
[     5.741] (**) Option "xkb_layout" "fr"
[     5.741] (II) event15 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[     5.741] (II) event15 - Eee PC WMI hotkeys: device is a keyboard
[     5.744] (**) Razer Razer Anansi: Applying InputClass "libinput keyboard catchall"
[     5.744] (II) Using input driver 'libinput' for 'Razer Razer Anansi'
[     5.744] (II) systemd-logind: returning pre-existing fd for /dev/input/event5 13:69
[     5.744] (**) Razer Razer Anansi: always reports core events
[     5.744] (**) Option "Device" "/dev/input/event5"
[     5.744] (**) Option "_source" "_driver/libinput"
[     5.744] (II) libinput: Razer Razer Anansi: is a virtual subdevice
[     5.744] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.1/0003:1532:010F.0005/input/input5/event5"
[     5.744] (II) XINPUT: Adding extended input device "Razer Razer Anansi" (type: KEYBOARD, id 15)
[     5.744] (**) Option "xkb_model" "pc105"
[     5.744] (**) Option "xkb_layout" "fr"
[    27.654] (**) Option "fd" "22"
[    27.654] (II) event1  - Power Button: device removed
[    27.654] (**) Option "fd" "25"
[    27.654] (II) event0  - Power Button: device removed
[    27.654] (**) Option "fd" "26"
[    27.654] (II) event4  - Razer Razer Anansi: device removed
[    27.654] (**) Option "fd" "27"
[    27.654] (**) Option "fd" "28"
[    27.654] (II) event6  - Razer Razer Anansi: device removed
[    27.654] (**) Option "fd" "29"
[    27.654] (II) event7  - Kingston HyperX 7.1 Audio: device removed
[    27.654] (**) Option "fd" "30"
[    27.654] (II) event2  - KYE Systems Corp Scorpion M6-600 Gaming Mouse: device removed
[    27.654] (**) Option "fd" "31"
[    27.654] (II) event3  - KYE Systems Corp Scorpion M6-600 Gaming Mouse: device removed
[    27.655] (**) Option "fd" "32"
[    27.655] (II) event15 - Eee PC WMI hotkeys: device removed
[    27.655] (**) Option "fd" "27"
[    27.655] (II) event5  - Razer Razer Anansi: device removed
[    27.655] (II) systemd-logind: got pause for 13:71
[    27.655] (II) systemd-logind: got pause for 13:69
[    27.655] (II) systemd-logind: got pause for 13:65
[    27.655] (II) systemd-logind: got pause for 13:64
[    27.655] (II) systemd-logind: got pause for 13:79
[    27.655] (II) systemd-logind: got pause for 13:67
[    27.655] (II) systemd-logind: got pause for 13:66
[    27.655] (II) systemd-logind: got pause for 13:70
[    27.655] (II) systemd-logind: got pause for 13:68
[    81.348] (II) UnloadModule: "libinput"
[    81.350] (II) systemd-logind: not releasing fd for 13:69, still in use
[    81.350] (II) UnloadModule: "libinput"
[    81.350] (II) systemd-logind: releasing fd for 13:79
[    81.456] (II) UnloadModule: "libinput"
[    81.456] (II) systemd-logind: releasing fd for 13:67
[    81.488] (II) UnloadModule: "libinput"
[    81.488] (II) systemd-logind: releasing fd for 13:66
[    81.520] (II) UnloadModule: "libinput"
[    81.520] (II) systemd-logind: releasing fd for 13:71
[    81.548] (II) UnloadModule: "libinput"
[    81.548] (II) systemd-logind: releasing fd for 13:70
[    81.588] (II) UnloadModule: "libinput"
[    81.588] (II) systemd-logind: releasing fd for 13:69
[    81.608] (II) UnloadModule: "libinput"
[    81.608] (II) systemd-logind: releasing fd for 13:68
[    81.628] (II) UnloadModule: "libinput"
[    81.628] (II) systemd-logind: releasing fd for 13:64
[    81.652] (II) UnloadModule: "libinput"
[    81.652] (II) systemd-logind: releasing fd for 13:65
[    81.685] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[    81.685] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[    81.685] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[    81.686] (II) Server terminated successfully (0). Closing log file.

Ca fait quelques jours que je bloque sur cette question, je vois plus trop où donner de la tête maintenant... Si jamais vous avez des pistes je suis preneur !

Merci beaucoup,

Yann



EDIT : Ajout de quelques infos sur mon système :

 ~$ screenfetch 
                          ./+o+-      
                  yyyyy- -yyyyyy+      OS: Ubuntu 18.04 bionic
               ://+//////-yyyyyyo      Kernel: x86_64 Linux 4.15.0-43-generic
           .++ .:/++++++/-.+sss/`      Uptime: 44m
         .:++o:  /++++++++/:--:/-      Packages: 1913
        o:+o+:++.`..```.-/oo+++++/     Shell: bash 4.4.19
       .:+o:+o/.          `+sssoo+/    Resolution: 5520x1200
  .++/+:+oo+o:`             /sssooo.   DE: GNOME 
 /+++//+:`oo+o               /::--:.   WM: GNOME Shell
 \+/+o+++`o++o               ++////.   WM Theme: 
  .++.o+++oo+:`             /dddhhh.   GTK Theme: vimix-dark-laptop-ruby [GTK2/3]
       .+.o+oo:.          `oddhhhh+    Icon Theme: Numix
        \+.++o+o``-````.:ohdhhhhh+     Font: Ubuntu 11
         `:o+++ `ohhhhhhhhyo++os:      CPU: Intel Core i7-4790K @ 8x 4.4GHz [27.8°C]
           .o:`.syhhhhhhh/.oo++o`      GPU: NV124
               /osyyyyyyo++ooo+++/     RAM: 2999MiB / 15983MiB
                   ````` +oo+++o\:    
                          `oo++.    

Dernière modification par Yann0 (Le 27/12/2018, à 23:59)

Hors ligne

#2 Le 03/01/2019, à 13:28

Yann0

Re : Freezes récurrents après bidouillage avec mes drivers graphiques

Up ! Si jamais quelqu'un a une idée ça serait génial !

Hors ligne