Contenu | Rechercher | Menus

Annonce

L'équipe des administrateurs et modérateurs du forum vous souhaite d'excellentes fêtes de fin d'année !

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 09/01/2019, à 08:57

iwanael

Problème de démarrage [Résolu - ou plutôt contourné]

Bonjour,
J'utilise Xubuntu sur cet ordinateur depuis plusieurs années, et habituellement sans problème.
Ce matin, il ne veut pas démarrer et me parle d'une erreur swap.
Avant de tenter de réparer, je souhaiterais récupérer mes rfichiers perso (la dernière sauvegarde est assez vieille).
Je boote sur une clé en live, mais je ne sais pas rtécupérer les fichiers de mon disque dur à partir de cette clé. Qui peut m'aéider ?
Merci

Dernière modification par iwanael (Le 09/01/2019, à 18:28)

Hors ligne

#2 Le 09/01/2019, à 09:18

diesel83140

Re : Problème de démarrage [Résolu - ou plutôt contourné]

Il te faut un support externe (pour y stocker les fichiers).

Ensuite, à partir du système lancé à partir de la clé USB, il faut aller dans le gestionnaire de fichiers et ouvrir la partition de ton disque dur qui contient tes données.

Une fois que c'est fait, il n'y a plus qu'à copier.

Amicalement.

Jean-Marie


Je déteste qu'on cherche à me faire passer pour un con, j'y arrive déjà très bien tout seul.
Le mort, il sait pas qu'il est mort ; c'est pour les autres que c'est dur.................... Pour les cons, c'est pareil.

Hors ligne

#3 Le 09/01/2019, à 09:20

NicoApi73

Re : Problème de démarrage [Résolu - ou plutôt contourné]

Bonjour,

Peux tu faire un boot-info à partir de ta session live, qu'on voit comment est fait le partitionnement? Profite en pour faire une analyse smart du disque dur, que s'il y a un problème sur le disque on n'aggrave pas la situation.

EDIT : diesel83140 a été un peu plus rapide que moi...

Dernière modification par NicoApi73 (Le 09/01/2019, à 09:22)

Hors ligne

#4 Le 09/01/2019, à 11:17

iwanael

Re : Problème de démarrage [Résolu - ou plutôt contourné]

Je suis content d'être pris pour quelqu'un de compétent mais :

il faut aller dans le gestionnaire de fichiers et ouvrir la partition de ton disque dur qui contient tes données.

J'azi ouvert ce fameux gestionnaire de fichiers, il me propose <système de fichiers> mais je crois que je reste sur ma clé live.
Il me propose aussi Xubuntu 18.04 (et c'est peut-être ça mon DD) mais il refuse de l'ouvrir !
Il me dit

Error mounting /dev/sdb1 at /media/xubuntu/Xubuntu 18.04.1 LTS amd64: /dev/sdb1 already mounted or mount point busy.

Et puis pour NiciApi73, peux-tu préciser comment je fais un boot-info et une analyse smart ?
Désolé de vous décevoir quant à mes compétences

Hors ligne

#5 Le 09/01/2019, à 11:26

iwanael

Re : Problème de démarrage [Résolu - ou plutôt contourné]

Quand même pa si nul (merci la doc)
Mon boot-info est là : http://paste.ubuntu.com/p/HQ2f228bxn/

Hors ligne

#6 Le 09/01/2019, à 11:30

NicoApi73

Re : Problème de démarrage [Résolu - ou plutôt contourné]

Boot-info :

sudo add-apt-repository -y ppa:yannubuntu/boot-repair
sudo apt update 
sudo apt install -y boot-info
sudo boot-info 

Copie le lien URL dans ta réponse.

Pour une analyse smart :

sudo apt install --no-install-recommends smartmontools
sudo smartctl -a /dev/sda

Remplacer X par la lettre correspondant à ton disque dur

EDIT : Le disque à analyser est sda. Je regarde ton boot info un peu plus tard

Dernière modification par NicoApi73 (Le 09/01/2019, à 11:33)

Hors ligne

#7 Le 09/01/2019, à 11:33

iwanael

Re : Problème de démarrage [Résolu - ou plutôt contourné]

et puis j'ai ça aussi :

xubuntu@xubuntu:~$  sudo smartctl --smart=on --offlineauto=on --saveauto=on /dev/sda1
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-29-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
SMART Attribute Autosave Enabled.
SMART Automatic Offline Testing Enabled every four hours.

xubuntu@xubuntu:~$  sudo smartctl --smart=on --offlineauto=on --saveauto=on /dev/sda5
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-29-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
SMART Attribute Autosave Enabled.
SMART Automatic Offline Testing Enabled every four hours.

Hors ligne

#8 Le 09/01/2019, à 11:36

iwanael

Re : Problème de démarrage [Résolu - ou plutôt contourné]

et puis ça :

xubuntu@xubuntu:~$ sudo smartctl -s on -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-29-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.12
Device Model:     ST3500418AS
Serial Number:    5VMR4X22
LU WWN Device Id: 5 000c50 02fccbaa3
Firmware Version: CC46
User Capacity:    500107862016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Wed Jan  9 10:35:33 2019 UTC

==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/213891en

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  600) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  81) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x103f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   101   099   006    Pre-fail  Always       -       3203554
  3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   095   095   020    Old_age   Always       -       5493
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   082   060   030    Pre-fail  Always       -       170805956
  9 Power_On_Hours          0x0032   054   054   000    Old_age   Always       -       40370
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   098   098   020    Old_age   Always       -       2719
183 Runtime_Bad_Block       0x0032   099   099   000    Old_age   Always       -       1
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   099   097   000    Old_age   Always       -       2384
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   057   040   045    Old_age   Always   In_the_past 43 (Min/Max 23/45 #9873)
194 Temperature_Celsius     0x0022   043   060   000    Old_age   Always       -       43 (0 10 0 0 0)
195 Hardware_ECC_Recovered  0x001a   028   020   000    Old_age   Always       -       3203554
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       47892 (203 193 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       2471603942
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       2780422335

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

xubuntu@xubuntu:~$ 

Hors ligne

#9 Le 09/01/2019, à 12:12

iwanael

Re : Problème de démarrage [Résolu - ou plutôt contourné]

et ça

xubuntu@xubuntu:~$ sudo smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-29-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.12
Device Model:     ST3500418AS
Serial Number:    5VMR4X22
LU WWN Device Id: 5 000c50 02fccbaa3
Firmware Version: CC46
User Capacity:    500107862016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Wed Jan  9 11:11:16 2019 UTC

==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/213891en

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  600) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  81) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x103f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   103   099   006    Pre-fail  Always       -       5908675
  3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   095   095   020    Old_age   Always       -       5495
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   082   060   030    Pre-fail  Always       -       170807626
  9 Power_On_Hours          0x0032   054   054   000    Old_age   Always       -       40371
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   098   098   020    Old_age   Always       -       2720
183 Runtime_Bad_Block       0x0032   099   099   000    Old_age   Always       -       1
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   099   097   000    Old_age   Always       -       2385
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   054   040   045    Old_age   Always   In_the_past 46 (Min/Max 44/46 #9873)
194 Temperature_Celsius     0x0022   046   060   000    Old_age   Always       -       46 (0 10 0 0 0)
195 Hardware_ECC_Recovered  0x001a   028   020   000    Old_age   Always       -       5908675
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       47896 (165 196 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       2471603984
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       1740757741

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

xubuntu@xubuntu:~$ 

Hors ligne

#10 Le 09/01/2019, à 12:15

xubu1957

Re : Problème de démarrage [Résolu - ou plutôt contourné]

Bonjour ,

Le boot-info :

Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------
 => No known boot loader is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb1: __________________________________________________________________________

    File system:       iso9660
    Boot sector type:  Unknown
    Boot sector info: 
    Mounting failed:   mount: /mnt/BootInfo/sdb1: /dev/sdb1 already mounted or mount point busy.

sdb2: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT16
    Boot sector info:  According to the info in the boot sector, sdb2 starts 
                       at sector 0. But according to the info from fdisk, 
                       sdb2 starts at sector 11812. According to the info in 
                       the boot sector, sdb2 has 0 sectors.
    Mounting failed:   mount: /mnt/BootInfo/sdb1: /dev/sdb1 already mounted or mount point busy.
mount: /mnt/BootInfo/sdb2: /dev/sdb2 already mounted or mount point busy.

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048   968,384,511   968,382,464  83 Linux
/dev/sda2         968,386,558   976,771,071     8,384,514   5 Extended
/dev/sda5         968,386,560   976,771,071     8,384,512  82 Linux swap / Solaris


Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 14.4 GiB, 15502147584 bytes, 30277632 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *              0     2,801,535     2,801,536   0 Empty
/dev/sdb2              11,812        16,483         4,672  ef EFI (FAT-12/16/32)

/dev/sdb1 overlaps with /dev/sdb2

GUID Partition Table detected, but does not seem to be used.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sdb1   +  R              0     2,801,479     2,801,480 Data partition (Windows/Linux)
/dev/sdb2   +  R         11,812        16,483         4,672 Data partition (Windows/Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        6aa57670-cd27-4033-831f-d34f9a1104b8   ext4       
/dev/sda5        1d2db6eb-2068-4b98-acfa-0199f706ae5a   swap       
/dev/sdb1        2018-07-25-03-28-45-00                 iso9660    Xubuntu 18.04.1 LTS amd64
/dev/sdb2        0D5F-1DB6                              vfat       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Jan  9 06:57 ata-HL-DT-STDVDRAM_GT34N_KYNB3J43040 -> ../../sr0
lrwxrwxrwx 1 root root  9 Jan  9 10:24 ata-ST3500418AS_5VMR4X22 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan  9 10:24 ata-ST3500418AS_5VMR4X22-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan  9 10:24 ata-ST3500418AS_5VMR4X22-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan  9 10:24 ata-ST3500418AS_5VMR4X22-part5 -> ../../sda5
lrwxrwxrwx 1 root root  9 Jan  9 10:24 usb-Verbatim_STORE_N_GO_07C103070504E466-0:0 -> ../../sdb
lrwxrwxrwx 1 root root 10 Jan  9 10:24 usb-Verbatim_STORE_N_GO_07C103070504E466-0:0-part1 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan  9 10:24 usb-Verbatim_STORE_N_GO_07C103070504E466-0:0-part2 -> ../../sdb2
lrwxrwxrwx 1 root root  9 Jan  9 10:24 wwn-0x5000c5002fccbaa3 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan  9 10:24 wwn-0x5000c5002fccbaa3-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan  9 10:24 wwn-0x5000c5002fccbaa3-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Jan  9 10:24 wwn-0x5000c5002fccbaa3-part5 -> ../../sda5

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb         /cdrom                   iso9660    (ro,noatime,nojoliet,check=s,map=n,blocksize=2048)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  6aa57670-cd27-4033-831f-d34f9a1104b8
else
  search --no-floppy --fs-uuid --set=root 6aa57670-cd27-4033-831f-d34f9a1104b8
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=10
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 10 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-6aa57670-cd27-4033-831f-d34f9a1104b8' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  6aa57670-cd27-4033-831f-d34f9a1104b8
	else
	  search --no-floppy --fs-uuid --set=root 6aa57670-cd27-4033-831f-d34f9a1104b8
	fi
        linux	/boot/vmlinuz-4.15.0-43-generic root=UUID=6aa57670-cd27-4033-831f-d34f9a1104b8 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-43-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-6aa57670-cd27-4033-831f-d34f9a1104b8' {
	menuentry 'Ubuntu, avec Linux 4.15.0-43-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-43-generic-advanced-6aa57670-cd27-4033-831f-d34f9a1104b8' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  6aa57670-cd27-4033-831f-d34f9a1104b8
		else
		  search --no-floppy --fs-uuid --set=root 6aa57670-cd27-4033-831f-d34f9a1104b8
		fi
		echo	'Chargement de Linux 4.15.0-43-generic…'
	        linux	/boot/vmlinuz-4.15.0-43-generic root=UUID=6aa57670-cd27-4033-831f-d34f9a1104b8 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-43-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-43-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-43-generic-recovery-6aa57670-cd27-4033-831f-d34f9a1104b8' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  6aa57670-cd27-4033-831f-d34f9a1104b8
		else
		  search --no-floppy --fs-uuid --set=root 6aa57670-cd27-4033-831f-d34f9a1104b8
		fi
		echo	'Chargement de Linux 4.15.0-43-generic…'
	        linux	/boot/vmlinuz-4.15.0-43-generic root=UUID=6aa57670-cd27-4033-831f-d34f9a1104b8 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-43-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-42-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-42-generic-advanced-6aa57670-cd27-4033-831f-d34f9a1104b8' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  6aa57670-cd27-4033-831f-d34f9a1104b8
		else
		  search --no-floppy --fs-uuid --set=root 6aa57670-cd27-4033-831f-d34f9a1104b8
		fi
		echo	'Chargement de Linux 4.15.0-42-generic…'
	        linux	/boot/vmlinuz-4.15.0-42-generic root=UUID=6aa57670-cd27-4033-831f-d34f9a1104b8 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-42-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-42-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-42-generic-recovery-6aa57670-cd27-4033-831f-d34f9a1104b8' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  6aa57670-cd27-4033-831f-d34f9a1104b8
		else
		  search --no-floppy --fs-uuid --set=root 6aa57670-cd27-4033-831f-d34f9a1104b8
		fi
		echo	'Chargement de Linux 4.15.0-42-generic…'
	        linux	/boot/vmlinuz-4.15.0-42-generic root=UUID=6aa57670-cd27-4033-831f-d34f9a1104b8 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-42-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-39-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-39-generic-advanced-6aa57670-cd27-4033-831f-d34f9a1104b8' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  6aa57670-cd27-4033-831f-d34f9a1104b8
		else
		  search --no-floppy --fs-uuid --set=root 6aa57670-cd27-4033-831f-d34f9a1104b8
		fi
		echo	'Chargement de Linux 4.15.0-39-generic…'
	        linux	/boot/vmlinuz-4.15.0-39-generic root=UUID=6aa57670-cd27-4033-831f-d34f9a1104b8 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-39-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-39-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-39-generic-recovery-6aa57670-cd27-4033-831f-d34f9a1104b8' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  6aa57670-cd27-4033-831f-d34f9a1104b8
		else
		  search --no-floppy --fs-uuid --set=root 6aa57670-cd27-4033-831f-d34f9a1104b8
		fi
		echo	'Chargement de Linux 4.15.0-39-generic…'
	        linux	/boot/vmlinuz-4.15.0-39-generic root=UUID=6aa57670-cd27-4033-831f-d34f9a1104b8 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-39-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  6aa57670-cd27-4033-831f-d34f9a1104b8
	else
	  search --no-floppy --fs-uuid --set=root 6aa57670-cd27-4033-831f-d34f9a1104b8
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  6aa57670-cd27-4033-831f-d34f9a1104b8
	else
	  search --no-floppy --fs-uuid --set=root 6aa57670-cd27-4033-831f-d34f9a1104b8
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
/swapfile                                 none            swap    sw              0       0
/dev/disk/by-id/wwn-0x5000c500161b490b-part1 /mnt/wwn-0x5000c500161b490b-part1 auto nosuid,nodev,nofail,x-gvfs-show,x-udisks-auth 0 0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 258.131809235 = 277.166919680  boot/grub/grub.cfg                             2
 444.166503906 = 476.920152064  boot/grub/i386-pc/core.img                     1
  27.032119751 = 29.025517568   boot/vmlinuz-4.15.0-39-generic                 1
  27.637691498 = 29.675745280   boot/vmlinuz-4.15.0-42-generic                 2
  63.836811066 = 68.544253952   boot/vmlinuz-4.15.0-43-generic                 1
  63.836811066 = 68.544253952   vmlinuz                                        1
  27.637691498 = 29.675745280   vmlinuz.old                                    2
  27.478851318 = 29.505191936   boot/initrd.img-4.15.0-39-generic              1
  27.762611389 = 29.809876992   boot/initrd.img-4.15.0-42-generic              5
  18.039684296 = 19.369963520   boot/initrd.img-4.15.0-43-generic              4
  18.039684296 = 19.369963520   initrd.img                                     4
  27.762611389 = 29.809876992   initrd.img.old                                 5

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown MBR on /dev/sdb

00000000  45 52 08 00 00 00 90 90  00 00 00 00 00 00 00 00  |ER..............|
00000010  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000020  33 ed fa 8e d5 bc 00 7c  fb fc 66 31 db 66 31 c9  |3......|..f1.f1.|
00000030  66 53 66 51 06 57 8e dd  8e c5 52 be 00 7c bf 00  |fSfQ.W....R..|..|
00000040  06 b9 00 01 f3 a5 ea 4b  06 00 00 52 b4 41 bb aa  |.......K...R.A..|
00000050  55 31 c9 30 f6 f9 cd 13  72 16 81 fb 55 aa 75 10  |U1.0....r...U.u.|
00000060  83 e1 01 74 0b 66 c7 06  f3 06 b4 42 eb 15 eb 02  |...t.f.....B....|
00000070  31 c9 5a 51 b4 08 cd 13  5b 0f b6 c6 40 50 83 e1  |1.ZQ....[...@P..|
00000080  3f 51 f7 e1 53 52 50 bb  00 7c b9 04 00 66 a1 b0  |?Q..SRP..|...f..|
00000090  07 e8 44 00 0f 82 80 00  66 40 80 c7 02 e2 f2 66  |..D.....f@.....f|
000000a0  81 3e 40 7c fb c0 78 70  75 09 fa bc ec 7b ea 44  |.>@|..xpu....{.D|
000000b0  7c 00 00 e8 83 00 69 73  6f 6c 69 6e 75 78 2e 62  ||.....isolinux.b|
000000c0  69 6e 20 6d 69 73 73 69  6e 67 20 6f 72 20 63 6f  |in missing or co|
000000d0  72 72 75 70 74 2e 0d 0a  66 60 66 31 d2 66 03 06  |rrupt...f`f1.f..|
000000e0  f8 7b 66 13 16 fc 7b 66  52 66 50 06 53 6a 01 6a  |.{f...{fRfP.Sj.j|
000000f0  10 89 e6 66 f7 36 e8 7b  c0 e4 06 88 e1 88 c5 92  |...f.6.{........|
00000100  f6 36 ee 7b 88 c6 08 e1  41 b8 01 02 8a 16 f2 7b  |.6.{....A......{|
00000110  cd 13 8d 64 10 66 61 c3  e8 1e 00 4f 70 65 72 61  |...d.fa....Opera|
00000120  74 69 6e 67 20 73 79 73  74 65 6d 20 6c 6f 61 64  |ting system load|
00000130  20 65 72 72 6f 72 2e 0d  0a 5e ac b4 0e 8a 3e 62  | error...^....>b|
00000140  04 b3 07 cd 10 3c 0a 75  f1 cd 18 f4 eb fd 00 00  |.....<.u........|
00000150  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000160  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000170  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000190  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001b0  40 04 00 00 00 00 00 00  5d 9f 53 6c 00 00 80 00  |@.......].Sl....|
000001c0  01 00 00 55 e0 f9 00 00  00 00 80 bf 2a 00 00 fe  |...U........*...|
000001d0  ff ff ef fe ff ff 24 2e  00 00 40 12 00 00 00 00  |......$...@.....|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


/dev/sdb1: unknown GPT attributes
1000000000000001

/dev/sdb2: unknown GPT attributes
1000000000000001
Unknown BootLoader on sdb1

00000000  45 52 08 00 00 00 90 90  00 00 00 00 00 00 00 00  |ER..............|
00000010  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000020  33 ed fa 8e d5 bc 00 7c  fb fc 66 31 db 66 31 c9  |3......|..f1.f1.|
00000030  66 53 66 51 06 57 8e dd  8e c5 52 be 00 7c bf 00  |fSfQ.W....R..|..|
00000040  06 b9 00 01 f3 a5 ea 4b  06 00 00 52 b4 41 bb aa  |.......K...R.A..|
00000050  55 31 c9 30 f6 f9 cd 13  72 16 81 fb 55 aa 75 10  |U1.0....r...U.u.|
00000060  83 e1 01 74 0b 66 c7 06  f3 06 b4 42 eb 15 eb 02  |...t.f.....B....|
00000070  31 c9 5a 51 b4 08 cd 13  5b 0f b6 c6 40 50 83 e1  |1.ZQ....[...@P..|
00000080  3f 51 f7 e1 53 52 50 bb  00 7c b9 04 00 66 a1 b0  |?Q..SRP..|...f..|
00000090  07 e8 44 00 0f 82 80 00  66 40 80 c7 02 e2 f2 66  |..D.....f@.....f|
000000a0  81 3e 40 7c fb c0 78 70  75 09 fa bc ec 7b ea 44  |.>@|..xpu....{.D|
000000b0  7c 00 00 e8 83 00 69 73  6f 6c 69 6e 75 78 2e 62  ||.....isolinux.b|
000000c0  69 6e 20 6d 69 73 73 69  6e 67 20 6f 72 20 63 6f  |in missing or co|
000000d0  72 72 75 70 74 2e 0d 0a  66 60 66 31 d2 66 03 06  |rrupt...f`f1.f..|
000000e0  f8 7b 66 13 16 fc 7b 66  52 66 50 06 53 6a 01 6a  |.{f...{fRfP.Sj.j|
000000f0  10 89 e6 66 f7 36 e8 7b  c0 e4 06 88 e1 88 c5 92  |...f.6.{........|
00000100  f6 36 ee 7b 88 c6 08 e1  41 b8 01 02 8a 16 f2 7b  |.6.{....A......{|
00000110  cd 13 8d 64 10 66 61 c3  e8 1e 00 4f 70 65 72 61  |...d.fa....Opera|
00000120  74 69 6e 67 20 73 79 73  74 65 6d 20 6c 6f 61 64  |ting system load|
00000130  20 65 72 72 6f 72 2e 0d  0a 5e ac b4 0e 8a 3e 62  | error...^....>b|
00000140  04 b3 07 cd 10 3c 0a 75  f1 cd 18 f4 eb fd 00 00  |.....<.u........|
00000150  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001b0  40 04 00 00 00 00 00 00  5d 9f 53 6c 00 00 80 00  |@.......].Sl....|
000001c0  01 00 00 55 e0 f9 00 00  00 00 80 bf 2a 00 00 fe  |...U........*...|
000001d0  ff ff ef fe ff ff 24 2e  00 00 40 12 00 00 00 00  |......$...@.....|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


=============================== StdErr Messages: ===============================

File descriptor 9 (/proc/5835/mountinfo) leaked on lvs invocation. Parent PID 12374: bash
File descriptor 63 (pipe:[654480]) leaked on lvs invocation. Parent PID 12374: bash

ADDITIONAL INFORMATION :
=================== log of boot-info 20190109_1024 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
grub-probe : erreur : impossible de trouver un périphérique GRUB pour /dev/sdb1. Vérifiez device.map..
Warning: The driver descriptor says the physical block size is 2048 bytes, but Linux says it is 512 bytes.
boot-info is executed in live-session (Ubuntu 18.04.1 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s):      32-bit, 64-bit
file=/cdrom/preseed/xubuntu.seed boot=casper initrd=/casper/initrd quiet splash --- maybe-ubiquity
ls: impossible d'accéder à '/home/usr/.config': Aucun fichier ou dossier de ce type

=================== os-prober:
/dev/sda1:Ubuntu 18.04.1 LTS (18.04):Ubuntu:linux

=================== blkid:
/dev/sda1: UUID="6aa57670-cd27-4033-831f-d34f9a1104b8" TYPE="ext4" PARTUUID="276d24e7-01"
/dev/loop0: TYPE="squashfs"
/dev/sda5: UUID="1d2db6eb-2068-4b98-acfa-0199f706ae5a" TYPE="swap" PARTUUID="276d24e7-05"
/dev/sdb1: UUID="2018-07-25-03-28-45-00" LABEL="Xubuntu 18.04.1 LTS amd64" TYPE="iso9660" PTUUID="6c539f5d" PTTYPE="dos" PARTUUID="6c539f5d-01"
/dev/sdb2: SEC_TYPE="msdos" UUID="0D5F-1DB6" TYPE="vfat" PARTUUID="6c539f5d-02"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


=================== sda1/etc/grub.d/ :
drwxr-xr-x  2 root root     4096 nov.  30 06:32 grub.d
total 80
-rwxr-xr-x 1 root root  9783 juil. 17 18:13 00_header
-rwxr-xr-x 1 root root  6258 juil. 16 15:15 05_debian_theme
-rwxr-xr-x 1 root root 12693 juil. 17 18:13 10_linux
-rwxr-xr-x 1 root root 11298 juil. 17 18:13 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 juil. 17 18:13 30_os-prober
-rwxr-xr-x 1 root root  1418 juil. 17 18:13 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juil. 17 18:13 40_custom
-rwxr-xr-x 1 root root   216 juil. 17 18:13 41_custom
-rw-r--r-- 1 root root   483 juil. 17 18:13 README




=================== sda1/etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== sda1recordfail=1/grub/grubenv :
recordfail=1




=================== UEFI/Legacy mode:
This live-session is not in EFI-mode.
SecureBoot maybe enabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ng	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda1.

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:500GB:scsi:512:512:msdos:ATA ST3500418AS:;
1:1049kB:496GB:496GB:ext4::boot;
2:496GB:500GB:4293MB:::;
5:496GB:500GB:4293MB:linux-swap(v1)::;

BYT;
/dev/sdb:15.5GB:scsi:512:512:unknown:Verbatim STORE N GO:;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
loop0 loop squashfs   1,3G
sda   disk          465,8G
sda1  part ext4     461,8G
sda2  part              1K
sda5  part swap         4G
sdb   disk iso9660   14,4G Xubuntu 18.04.1 LTS amd64
sdb1  part iso9660    1,3G Xubuntu 18.04.1 LTS amd64
sdb2  part vfat       2,3M Xubuntu 18.04.1 LTS amd64
sr0   rom            1024M

KNAME ROTA RO RM STATE   MOUNTPOINT
loop0    1  1  0         /rofs
sda      1  0  0 running
sda1     1  0  0         /mnt/boot-sav/sda1
sda2     1  0  0
sda5     1  0  0         [SWAP]
sdb      1  0  1 running /cdrom
sdb1     1  0  1
sdb2     1  0  1
sr0      1  0  1 running


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1965352k,nr_inodes=491338,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=403944k,mode=755)
/dev/sdb on /cdrom type iso9660 (ro,noatime,nojoliet,check=s,map=n,blocksize=2048)
/dev/loop0 on /rofs type squashfs (ro,noatime)
/cow on / type overlay (rw,relatime,lowerdir=//filesystem.squashfs,upperdir=/cow/upper,workdir=/cow/work)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=26,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=13959)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
mqueue on /dev/mqueue type mqueue (rw,relatime)
tracefs on /sys/kernel/debug/tracing type tracefs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,relatime)
tmpfs on /run/user/999 type tmpfs (rw,nosuid,nodev,relatime,size=403940k,mode=700,uid=999,gid=999)
gvfsd-fuse on /run/user/999/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=999,group_id=999)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,relatime)
gvfsd-fuse on /home/xubuntu/.gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=0,group_id=0)
/dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw,relatime,data=ordered)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent
/sys/block/sdb (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sdb1 sdb2 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd dvdrw ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hidraw3 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 initctl input kmsg kvm lightnvm log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sdb sdb1 sdb2 sg0 sg1 sg2 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper:  control

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     395M  1.6M  393M   1% /run
/dev/sdb       iso9660   1.4G  1.4G     0 100% /cdrom
/dev/loop0     squashfs  1.3G  1.3G     0 100% /rofs
/cow           overlay   2.0G  260M  1.7G  14% /
tmpfs          tmpfs     2.0G   44M  1.9G   3% /dev/shm
tmpfs          tmpfs     5.0M  8.0K  5.0M   1% /run/lock
tmpfs          tmpfs     2.0G     0  2.0G   0% /sys/fs/cgroup
tmpfs          tmpfs     2.0G  528K  2.0G   1% /tmp
tmpfs          tmpfs     395M   20K  395M   1% /run/user/999
/dev/sda1      ext4      454G   18G  414G   4% /mnt/boot-sav/sda1

=================== fdisk -l:
Disk /dev/loop0: 1.3 GiB, 1345060864 bytes, 2627072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x276d24e7

Device     Boot     Start       End   Sectors   Size Id Type
/dev/sda1  *         2048 968384511 968382464 461.8G 83 Linux
/dev/sda2       968386558 976771071   8384514     4G  5 Extended
/dev/sda5       968386560 976771071   8384512     4G 82 Linux swap / Solaris




Disk /dev/sdb: 14.4 GiB, 15502147584 bytes, 30277632 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x6c539f5d

Device     Boot Start     End Sectors  Size Id Type
/dev/sdb1  *        0 2801535 2801536  1.3G  0 Empty
/dev/sdb2       11812   16483    4672  2.3M ef EFI (FAT-12/16/32)




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s


=================== Final advice in case of suggested repair


Les fichiers de démarrage de [Ubuntu 18.04.1 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.

Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 18.04.1 LTS - Lenovo T410 -Toshiba Satellite A300  Membre de Linux-Azur

Hors ligne

#11 Le 09/01/2019, à 12:37

NicoApi73

Re : Problème de démarrage [Résolu - ou plutôt contourné]

  1 Raw_Read_Error_Rate     0x000f   103   099   006    Pre-fail  Always       -       5908675
  7 Seek_Error_Rate         0x000f   082   060   030    Pre-fail  Always       -       170807626

Pour moi ton disque montre des signes de faiblesse et n'est pas de toute jeunesse :

  9 Power_On_Hours          0x0032   054   054   000    Old_age   Always       -       40371

Je pense qu'il n'est pas judicieux de continuer à l'utiliser.

sudo mkdir /mnt/mon_disque
sudo mount /dev/sda1 /mnt/mon_disque

Lance le gestionnaire de fichier, système de fichier et la racine de ton disque se trouve dans /mnt/mon_disque (et donc tes données dans /mnt/mon_disque/home)

EDIT : merci xubu pour le boot-info

Dernière modification par NicoApi73 (Le 09/01/2019, à 12:38)

Hors ligne

#12 Le 09/01/2019, à 12:48

iwanael

Re : Problème de démarrage [Résolu - ou plutôt contourné]

OK NikoApi73
J'ai récupéré mes fichiers perso. Je vais voir ce que je fais de ce vieux machin (8 ans à peine !!!)
Merci pour ce dépannage.

Hors ligne

#13 Le 09/01/2019, à 12:57

NicoApi73

Re : Problème de démarrage [Résolu - ou plutôt contourné]

Attends peut être le passage d'une personne plus expérimentée que moi concernant l'état de ton disque.

J’interprète les informations que j'ai mises dans mon post précédent comme quoi probablement que les têtes de lecture sont fatiguées. Il n'y a pas de secteurs réalloués donc la surface du disque doit être correcte.

Hors ligne

#14 Le 09/01/2019, à 17:29

Babdu89

Re : Problème de démarrage [Résolu - ou plutôt contourné]

Bonjour.

Sans parler de l'état du disque, je n'y connais rien.
Dans le bootinfo on voit ceci;

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
/swapfile                                 none            swap    sw              0       0
/dev/disk/by-id/wwn-0x5000c500161b490b-part1 /mnt/wwn-0x5000c500161b490b-part1 auto nosuid,nodev,nofail,x-gvfs-show,x-udisks-auth 0 0
--------------------------------------------------------------------------------

Pour la partition système /dev/sda1. Il ne manquerait pas cette ligne?.

 UUID=6aa57670-cd27-4033-831f-d34f9a1104b8   /   ext4   noatime,errors=remount-ro   0   1 

Avant celle-ci?.

/swapfile                                 none            swap    sw              0       0

@+.   Babdu89  .


J'ai découvert Ubuntu avec la 07.10.... Et alors?!...  Depuis je regarde de temps en temps si Windows marche toujours....

Hors ligne

#15 Le 09/01/2019, à 17:47

iwanael

Re : Problème de démarrage [Résolu - ou plutôt contourné]

Merci Babdu89 de t'intéresser à mon problème,
Serait-il possible qu'une ligne disparaisse dans un fichier ?
De toute façon, j'ai résolu mon problème ..... en réinstallant tout !
Tout s'est bien passé et maintenant ça marche! (Jusqu'à quand ?)

Hors ligne

#16 Le 09/01/2019, à 21:15

Babdu89

Re : Problème de démarrage [Résolu - ou plutôt contourné]

Bonsoir.

On peut avoir un boot info de la réinstallation?.
Merci.

@+.   Babdu89   .


J'ai découvert Ubuntu avec la 07.10.... Et alors?!...  Depuis je regarde de temps en temps si Windows marche toujours....

Hors ligne

#17 Le 10/01/2019, à 07:08

iwanael

Re : Problème de démarrage [Résolu - ou plutôt contourné]

Voilà.
Fais-en bon usage


 Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub. It also embeds following components:
    
    modules
    ---------------------------------------------------------------------------
    fshelp ext2 part_msdos biosdisk
    ---------------------------------------------------------------------------

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/grub/i386-pc/core.img

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048   976,771,071   976,769,024  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/sda1        19e3aad8-7554-455c-a343-f717516f1ac4   ext4       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Jan 10 07:05 ata-ST3500418AS_5VMR4X22 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 10 07:05 ata-ST3500418AS_5VMR4X22-part1 -> ../../sda1
lrwxrwxrwx 1 root root  9 Jan 10 07:05 wwn-0x5000c5002fccbaa3 -> ../../sda
lrwxrwxrwx 1 root root 10 Jan 10 07:05 wwn-0x5000c5002fccbaa3-part1 -> ../../sda1

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda1        /                        ext4       (rw,relatime,errors=remount-ro,data=ordered)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_msdos
insmod ext2
set root='hd0,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  19e3aad8-7554-455c-a343-f717516f1ac4
else
  search --no-floppy --fs-uuid --set=root 19e3aad8-7554-455c-a343-f717516f1ac4
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=10
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 10 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-19e3aad8-7554-455c-a343-f717516f1ac4' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  19e3aad8-7554-455c-a343-f717516f1ac4
	else
	  search --no-floppy --fs-uuid --set=root 19e3aad8-7554-455c-a343-f717516f1ac4
	fi
        linux	/boot/vmlinuz-4.15.0-43-generic root=UUID=19e3aad8-7554-455c-a343-f717516f1ac4 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-4.15.0-43-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-19e3aad8-7554-455c-a343-f717516f1ac4' {
	menuentry 'Ubuntu, avec Linux 4.15.0-43-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-43-generic-advanced-19e3aad8-7554-455c-a343-f717516f1ac4' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  19e3aad8-7554-455c-a343-f717516f1ac4
		else
		  search --no-floppy --fs-uuid --set=root 19e3aad8-7554-455c-a343-f717516f1ac4
		fi
		echo	'Chargement de Linux 4.15.0-43-generic…'
	        linux	/boot/vmlinuz-4.15.0-43-generic root=UUID=19e3aad8-7554-455c-a343-f717516f1ac4 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-43-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-43-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-43-generic-recovery-19e3aad8-7554-455c-a343-f717516f1ac4' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  19e3aad8-7554-455c-a343-f717516f1ac4
		else
		  search --no-floppy --fs-uuid --set=root 19e3aad8-7554-455c-a343-f717516f1ac4
		fi
		echo	'Chargement de Linux 4.15.0-43-generic…'
	        linux	/boot/vmlinuz-4.15.0-43-generic root=UUID=19e3aad8-7554-455c-a343-f717516f1ac4 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-43-generic
	}
	menuentry 'Ubuntu, avec Linux 4.15.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-29-generic-advanced-19e3aad8-7554-455c-a343-f717516f1ac4' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  19e3aad8-7554-455c-a343-f717516f1ac4
		else
		  search --no-floppy --fs-uuid --set=root 19e3aad8-7554-455c-a343-f717516f1ac4
		fi
		echo	'Chargement de Linux 4.15.0-29-generic…'
	        linux	/boot/vmlinuz-4.15.0-29-generic root=UUID=19e3aad8-7554-455c-a343-f717516f1ac4 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-29-generic
	}
	menuentry 'Ubuntu, with Linux 4.15.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.15.0-29-generic-recovery-19e3aad8-7554-455c-a343-f717516f1ac4' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_msdos
		insmod ext2
		set root='hd0,msdos1'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  19e3aad8-7554-455c-a343-f717516f1ac4
		else
		  search --no-floppy --fs-uuid --set=root 19e3aad8-7554-455c-a343-f717516f1ac4
		fi
		echo	'Chargement de Linux 4.15.0-29-generic…'
	        linux	/boot/vmlinuz-4.15.0-29-generic root=UUID=19e3aad8-7554-455c-a343-f717516f1ac4 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-4.15.0-29-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry 'Memory test (memtest86+)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  19e3aad8-7554-455c-a343-f717516f1ac4
	else
	  search --no-floppy --fs-uuid --set=root 19e3aad8-7554-455c-a343-f717516f1ac4
	fi
	knetbsd	/boot/memtest86+.elf
}
menuentry 'Memory test (memtest86+, serial console 115200)' {
	insmod part_msdos
	insmod ext2
	set root='hd0,msdos1'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1  19e3aad8-7554-455c-a343-f717516f1ac4
	else
	  search --no-floppy --fs-uuid --set=root 19e3aad8-7554-455c-a343-f717516f1ac4
	fi
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=19e3aad8-7554-455c-a343-f717516f1ac4 /               ext4    errors=remount-ro 0       1
/swapfile                                 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 400.146572113 = 429.654110208  boot/grub/grub.cfg                             3
 284.242652893 = 305.203224576  boot/grub/i386-pc/core.img                     1
 400.141826630 = 429.649014784  boot/vmlinuz-4.15.0-29-generic                 1
 287.262592316 = 308.445859840  boot/vmlinuz-4.15.0-43-generic                 1
 287.262592316 = 308.445859840  vmlinuz                                        1
 400.141826630 = 429.649014784  vmlinuz.old                                    1
 287.676555634 = 308.890349568  boot/initrd.img-4.15.0-29-generic              2
 287.853847504 = 309.080715264  boot/initrd.img-4.15.0-43-generic              1
 287.853847504 = 309.080715264  initrd.img                                     1
 287.676555634 = 308.890349568  initrd.img.old                                 2


ADDITIONAL INFORMATION :
=================== log of boot-info 20190110_0705 ===================
boot-info version : 4ppa65
boot-sav version : 4ppa65
boot-sav-extra version : 4ppa65
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 18.04.1 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s):      32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-4.15.0-43-generic root=UUID=19e3aad8-7554-455c-a343-f717516f1ac4 ro quiet splash vt.handoff=1

=================== os-prober:
/dev/sda1:L'OS actuellement utilisé - Ubuntu 18.04.1 LTS CurrentSession:linux

=================== blkid:
/dev/sda1: UUID="19e3aad8-7554-455c-a343-f717516f1ac4" TYPE="ext4" PARTUUID="f0bb35d5-01"


1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS.


=================== /etc/grub.d/ :
drwxr-xr-x  2 root root     4096 janv.  9 14:33 grub.d
total 80
-rwxr-xr-x 1 root root  9783 juil. 17 20:13 00_header
-rwxr-xr-x 1 root root  6258 juil. 16 17:15 05_debian_theme
-rwxr-xr-x 1 root root 12693 juil. 17 20:13 10_linux
-rwxr-xr-x 1 root root 11298 juil. 17 20:13 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 juil. 17 20:13 30_os-prober
-rwxr-xr-x 1 root root  1418 juil. 17 20:13 30_uefi-firmware
-rwxr-xr-x 1 root root   214 juil. 17 20:13 40_custom
-rwxr-xr-x 1 root root   216 juil. 17 20:13 41_custom
-rw-r--r-- 1 root root   483 juil. 17 20:13 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"




=================== UEFI/Legacy mode:
This installed-session is not in EFI-mode.
SecureBoot disabled.


=================== PARTITIONS & DISKS:
sda1	: sda,	not-sepboot,	grubenv-ok	grub2,	grub-pc ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-without-efi,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, .

sda	: not-GPT,	BIOSboot-not-needed,	has-no-EFIpart, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:500GB:scsi:512:512:msdos:ATA ST3500418AS:;
1:1049kB:500GB:500GB:ext4::boot;

=================== lsblk:
KNAME TYPE FSTYPE   SIZE LABEL
sda   disk        465,8G
sda1  part ext4   465,8G
sr0   rom          1024M

KNAME ROTA RO RM STATE   MOUNTPOINT
sda      1  0  0 running
sda1     1  0  0         /
sr0      1  0  1 running


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=1956264k,nr_inodes=489066,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=403944k,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,errors=remount-ro,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=34,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=1566)
mqueue on /dev/mqueue type mqueue (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=403940k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro sda1 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri dvd ecryptfs fb0 fd full fuse hidraw0 hidraw1 hidraw2 hidraw3 hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 initctl input kmsg kvm lightnvm log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uhid uinput urandom usb userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 zero
ls /dev/mapper:  control

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     395M  1.5M  393M   1% /run
/dev/sda1      ext4      458G   13G  422G   3% /
tmpfs          tmpfs     2.0G   50M  1.9G   3% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     2.0G     0  2.0G   0% /sys/fs/cgroup
tmpfs          tmpfs     395M   16K  395M   1% /run/user/1000

=================== fdisk -l:
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xf0bb35d5

Device     Boot Start       End   Sectors   Size Id Type
/dev/sda1  *     2048 976771071 976769024 465.8G 83 Linux




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub2 of sda1 into the MBR of sda.
Additional repair would be performed: unhide-bootmenu-10s


=================== Final advice in case of suggested repair


Les fichiers de démarrage de [L'OS actuellement utilisé - Ubuntu 18.04.1 LTS] sont loin du début du disque. Votre BIOS pourrait ne pas les détecter. Vous voudrez peut-être re-essayer après avoir créé une partition /boot (EXT4, >200MB, en début de disque). Cela peut être réalisé via des outils tels que gParted. Puis sélectionnez cette partition via l'option [Partition /boot séparée :] de [Boot-Repair]. (http://doc.ubuntu-fr.org/tutoriel/partition_boot)


=================== User settings
The settings chosen by the user will not act on the boot.

Hors ligne

#18 Le 10/01/2019, à 09:39

Babdu89

Re : Problème de démarrage [Résolu - ou plutôt contourné]

Bonjour.

Serait-il possible qu'une ligne disparaisse dans un fichier ?

Et bien, oui. Mais comment çà c'est fait?.  Je ne sais pas...

Voila, le contenu du fichier  fstab est correcte après réinstallation.

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=19e3aad8-7554-455c-a343-f717516f1ac4 /           ext4    errors=remount-ro 0       1

/swapfile                                 none            swap    sw              0       0
--------------------------------------------------------------------------------

Si il n'y avait pas eu précipitation de ta part, on aurait ajouté une ligne comme montré post#14, dans le fstab, et regarder si çà répare.

@+.   Babdu89   .

Dernière modification par Babdu89 (Le 10/01/2019, à 09:42)


J'ai découvert Ubuntu avec la 07.10.... Et alors?!...  Depuis je regarde de temps en temps si Windows marche toujours....

Hors ligne

#19 Le 10/01/2019, à 09:45

iwanael

Re : Problème de démarrage [Résolu - ou plutôt contourné]

OK! J'ai compris.
Le temps passé à réinstaller ne m'a pas coûté, je n'avais que ça à faire, mais j'admets que je suis allé un peu trop vite.
Merci à toi pour ton aide.

Hors ligne