Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 11/02/2019, à 18:09

MadOff

Graveur DVD-RW non reconnu [Alternative]

Bonjour,

Mon lecteur graveur DVD n'est pas reconnu sous lubuntu 18.04.
Il est visible dans le bios, il s'allume au démarrage et clignote avec un dvd dedans. IL répond à la commande ejct dans le terminal ainsi que dans vlc.
Mais il n'est pas visible.
Voici dmesg

[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fe8abff] usable
[    0.000000] BIOS-e820: [mem 0x000000003fe8ac00-0x000000003fe8cbff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000003fe8cc00-0x000000003fe8ebff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003fe8ec00-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: Dell Inc.                 Precision WorkStation 380    /0CJ774, BIOS A06 01/09/2006
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3fe8a max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 03FF00000 mask FFFF00000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] total RAM covered: 1023M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 2M 	num_reg: 2  	lose cover RAM: 0G
[    0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [(ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x173fffff]
[    0.000000] Base memory trampoline at [(ptrval)] 9b000 size 16384
[    0.000000] BRK [0x16fa2000, 0x16fa2fff] PGTABLE
[    0.000000] BRK [0x16fa3000, 0x16fa3fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x31ca5000-0x34e49fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FEB00 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x00000000000FD266 00005C (v01 DELL   WS 380   00000007 ASL  00000061)
[    0.000000] ACPI: FACP 0x00000000000FD35E 0000F4 (v03 DELL   WS 380   00000007 ASL  00000061)
[    0.000000] ACPI: DSDT 0x00000000FFFCA577 0030D7 (v01 DELL   dt_ex    00001000 INTL 20050211)
[    0.000000] ACPI: FACS 0x000000003FE8AC00 000040
[    0.000000] ACPI: FACS 0x000000003FE8AC00 000040
[    0.000000] ACPI: SSDT 0x00000000FFFCD764 0000A6 (v01 DELL   st_ex    00001000 INTL 20050211)
[    0.000000] ACPI: APIC 0x00000000000FD452 000072 (v01 DELL   WS 380   00000007 ASL  00000061)
[    0.000000] ACPI: BOOT 0x00000000000FD4C4 000028 (v01 DELL   WS 380   00000007 ASL  00000061)
[    0.000000] ACPI: ASF! 0x00000000000FD4EC 000067 (v16 DELL   WS 380   00000007 ASL  00000061)
[    0.000000] ACPI: MCFG 0x00000000000FD553 00003E (v01 DELL   WS 380   00000007 ASL  00000061)
[    0.000000] ACPI: HPET 0x00000000000FD591 000038 (v01 DELL   WS 380   00000007 ASL  00000061)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 134MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] BRK [0x16fa4000, 0x16fa4fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000377fdfff]
[    0.000000]   HighMem  [mem 0x00000000377fe000-0x000000003fe89fff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000003fe89fff]
[    0.000000] Reserved but unavailable: 471 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003fe89fff]
[    0.000000] On node 0 totalpages: 261673
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   Normal zone: 2180 pages used for memmap
[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
[    0.000000]   HighMem zone: 34444 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x81/0x433 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 30 pages/cpu @(ptrval) s93068 r0 d29812 u122880
[    0.000000] pcpu-alloc: s93068 r0 d29812 u122880 alloc=30*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 259453
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-45-generic root=UUID=117a3bcf-db1f-4dbb-a939-6497ec3e2834 ro quiet splash vt.handoff=1
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] microcode: microcode updated early to revision 0xf, date = 2005-12-15
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0003fe8a)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 968244K/1046692K available (8836K kernel code, 888K rwdata, 3456K rodata, 1092K init, 848K bss, 78448K reserved, 0K cma-reserved, 137776K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff14000 - 0xfffff000   ( 940 kB)
                 cpu_entry : 0xffa00000 - 0xffb39000   (1252 kB)
                   pkmap   : 0xff800000 - 0xffa00000   (2048 kB)
                   vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
                     .init : 0xd6cf9000 - 0xd6e0a000   (1092 kB)
                     .data : 0xd68a1168 - 0xd6ce6000   (4371 kB)
                     .text : 0xd6000000 - 0xd68a1168   (8836 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 37873 entries in 74 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 2304, nr_irqs: 456, preallocated irqs: 16
[    0.000000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 1048576 bytes of page_ext
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 3191.697 MHz processor
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6383.39 BogoMIPS (lpj=12766788)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.024000] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.024000] mce: CPU supports 4 MCE banks
[    0.024000] CPU0: Thermal monitoring enabled (TM1)
[    0.024000] process: using mwait in idle threads
[    0.024000] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[    0.024000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[    0.024000] Spectre V2 : Mitigation: Full generic retpoline
[    0.024000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.024000] Speculative Store Bypass: Vulnerable
[    0.024000] Freeing SMP alternatives memory: 36K
[    0.032000] smpboot: CPU0: Intel(R) Pentium(R) D CPU 3.20GHz (family: 0xf, model: 0x6, stepping: 0x2)
[    0.032000] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.032000] ... version:                0
[    0.032000] ... bit width:              40
[    0.032000] ... generic registers:      18
[    0.032000] ... value mask:             000000ffffffffff
[    0.032000] ... max period:             0000007fffffffff
[    0.032000] ... fixed-purpose events:   0
[    0.032000] ... event mask:             000000000003ffff
[    0.032000] Hierarchical SRCU implementation.
[    0.032000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.032000] smp: Bringing up secondary CPUs ...
[    0.032000] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.032000] x86: Booting SMP configuration:
[    0.032000] .... node  #0, CPUs:      #1
[    0.004000] Initializing CPU#1
[    0.043414] smp: Brought up 1 node, 2 CPUs
[    0.043414] smpboot: Max logical packages: 2
[    0.043414] smpboot: Total of 2 processors activated (12766.78 BogoMIPS)
[    0.044299] devtmpfs: initialized
[    0.044409] evm: security.selinux
[    0.044410] evm: security.SMACK64
[    0.044411] evm: security.SMACK64EXEC
[    0.044412] evm: security.SMACK64TRANSMUTE
[    0.044413] evm: security.SMACK64MMAP
[    0.044414] evm: security.apparmor
[    0.044416] evm: security.ima
[    0.044417] evm: security.capability
[    0.044462] PM: Registering ACPI NVS region [mem 0x3fe8ac00-0x3fe8cbff] (8192 bytes)
[    0.044462] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.044462] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.044462] pinctrl core: initialized pinctrl subsystem
[    0.044462] RTC time: 16:39:47, date: 02/11/19
[    0.044462] NET: Registered protocol family 16
[    0.044639] audit: initializing netlink subsys (disabled)
[    0.044668] audit: type=2000 audit(1549903186.044:1): state=initialized audit_enabled=0 res=1
[    0.044668] EISA bus registered
[    0.044668] cpuidle: using governor ladder
[    0.044668] cpuidle: using governor menu
[    0.044668] Simple Boot Flag at 0x7a set to 0x1
[    0.044668] ACPI: bus type PCI registered
[    0.044668] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.044668] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.044668] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    0.044668] PCI: Using MMCONFIG for extended config space
[    0.044668] PCI: Using configuration type 1 for base access
[    0.050310] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.050310] ACPI: Added _OSI(Module Device)
[    0.050310] ACPI: Added _OSI(Processor Device)
[    0.050310] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.050310] ACPI: Added _OSI(Processor Aggregator Device)
[    0.050310] ACPI: Added _OSI(Linux-Dell-Video)
[    0.050310] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.050310] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.068278] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.078163] ACPI: Interpreter enabled
[    0.078214] ACPI: (supports S0 S1 S3 S4 S5)
[    0.078216] ACPI: Using IOAPIC for interrupt routing
[    0.078311] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.078566] ACPI: Enabled 12 GPEs in block 00 to 1F
[    0.172838] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.172846] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.172854] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.172859] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.177882] PCI host bridge to bus 0000:00
[    0.177886] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.177889] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.177892] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.177894] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff window]
[    0.177897] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.177900] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[    0.177902] pci_bus 0000:00: root bus resource [mem 0xe4000000-0xfebfffff window]
[    0.177905] pci_bus 0000:00: root bus resource [mem 0xffa80800-0xffa80bff window]
[    0.177908] pci_bus 0000:00: root bus resource [mem 0xffa7c000-0xffa7ffff window]
[    0.177911] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.177925] pci 0000:00:00.0: [8086:2774] type 00 class 0x060000
[    0.178332] pci 0000:00:01.0: [8086:2775] type 01 class 0x060400
[    0.178397] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.178811] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.178838] pci 0000:00:1b.0: reg 0x10: [mem 0xfebfc000-0xfebfffff 64bit]
[    0.178926] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.179307] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.179400] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.179792] pci 0000:00:1c.4: [8086:27e0] type 01 class 0x060400
[    0.179886] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.180282] pci 0000:00:1c.5: [8086:27e2] type 01 class 0x060400
[    0.180376] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.180762] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.180813] pci 0000:00:1d.0: reg 0x20: [io  0xff80-0xff9f]
[    0.181210] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.181260] pci 0000:00:1d.1: reg 0x20: [io  0xff60-0xff7f]
[    0.181654] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.181704] pci 0000:00:1d.2: reg 0x20: [io  0xff40-0xff5f]
[    0.182105] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.182155] pci 0000:00:1d.3: reg 0x20: [io  0xff20-0xff3f]
[    0.182557] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.182583] pci 0000:00:1d.7: reg 0x10: [mem 0xffa80800-0xffa80bff]
[    0.182674] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.183043] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.183474] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.183570] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[    0.183576] pci 0000:00:1f.0: quirk: [io  0x0880-0x08bf] claimed by ICH6 GPIO
[    0.183581] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00 (mask 007f)
[    0.183586] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 00e0 (mask 0007)
[    0.183978] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.184008] pci 0000:00:1f.1: reg 0x10: [io  0x01f0-0x01f7]
[    0.184019] pci 0000:00:1f.1: reg 0x14: [io  0x03f4-0x03f7]
[    0.184029] pci 0000:00:1f.1: reg 0x18: [io  0x0170-0x0177]
[    0.184040] pci 0000:00:1f.1: reg 0x1c: [io  0x0374-0x0377]
[    0.184050] pci 0000:00:1f.1: reg 0x20: [io  0xffa0-0xffaf]
[    0.184072] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.184075] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.184077] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.184079] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.184444] pci 0000:00:1f.2: [8086:27c1] type 00 class 0x010601
[    0.184464] pci 0000:00:1f.2: reg 0x10: [io  0xfe00-0xfe07]
[    0.184474] pci 0000:00:1f.2: reg 0x14: [io  0xfe10-0xfe13]
[    0.184483] pci 0000:00:1f.2: reg 0x18: [io  0xfe20-0xfe27]
[    0.184492] pci 0000:00:1f.2: reg 0x1c: [io  0xfe30-0xfe33]
[    0.184501] pci 0000:00:1f.2: reg 0x20: [io  0xfea0-0xfeaf]
[    0.184511] pci 0000:00:1f.2: reg 0x24: [mem 0xfebfbc00-0xfebfbfff]
[    0.184554] pci 0000:00:1f.2: PME# supported from D3hot
[    0.184916] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.184978] pci 0000:00:1f.3: reg 0x20: [io  0xece0-0xecff]
[    0.185421] pci 0000:01:00.0: [10de:00ce] type 00 class 0x030000
[    0.185441] pci 0000:01:00.0: reg 0x10: [mem 0xfc000000-0xfcffffff]
[    0.185454] pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
[    0.185466] pci 0000:01:00.0: reg 0x1c: [mem 0xfd000000-0xfdffffff 64bit]
[    0.185481] pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref]
[    0.185591] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.185600] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.185607] pci 0000:00:01.0:   bridge window [mem 0xfc000000-0xfeafffff]
[    0.185613] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[    0.185674] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.185681] pci 0000:00:1c.0:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.185766] pci 0000:03:00.0: [14e4:1659] type 00 class 0x020000
[    0.185805] pci 0000:03:00.0: reg 0x10: [mem 0xfbef0000-0xfbefffff 64bit]
[    0.185872] pci 0000:03:00.0: enabling Extended Tags
[    0.185958] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.186044] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.186055] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.186062] pci 0000:00:1c.4:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.186149] pci 0000:04:00.0: [14e4:1677] type 00 class 0x020000
[    0.186188] pci 0000:04:00.0: reg 0x10: [mem 0xfbdf0000-0xfbdfffff 64bit]
[    0.186256] pci 0000:04:00.0: enabling Extended Tags
[    0.186341] pci 0000:04:00.0: PME# supported from D3hot D3cold
[    0.186429] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.186440] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.186447] pci 0000:00:1c.5:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.186513] pci 0000:05:02.0: [11c1:5811] type 00 class 0x0c0010
[    0.186537] pci 0000:05:02.0: reg 0x10: [mem 0xfbcff000-0xfbcfffff]
[    0.186625] pci 0000:05:02.0: supports D1 D2
[    0.186627] pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot
[    0.186703] pci 0000:05:04.0: [1102:0002] type 00 class 0x040100
[    0.186727] pci 0000:05:04.0: reg 0x10: [io  0xdce0-0xdcff]
[    0.186815] pci 0000:05:04.0: supports D1 D2
[    0.186877] pci 0000:05:04.1: [1102:7002] type 00 class 0x098000
[    0.186900] pci 0000:05:04.1: reg 0x10: [io  0xdcd8-0xdcdf]
[    0.186987] pci 0000:05:04.1: supports D1 D2
[    0.187082] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.187087] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.187091] pci 0000:00:1e.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.187099] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.187101] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.187104] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.187106] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000effff window] (subtractive decode)
[    0.187109] pci 0000:00:1e.0:   bridge window [mem 0x000f0000-0x000fffff window] (subtractive decode)
[    0.187111] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xdfffffff window] (subtractive decode)
[    0.187114] pci 0000:00:1e.0:   bridge window [mem 0xe4000000-0xfebfffff window] (subtractive decode)
[    0.187116] pci 0000:00:1e.0:   bridge window [mem 0xffa80800-0xffa80bff window] (subtractive decode)
[    0.187119] pci 0000:00:1e.0:   bridge window [mem 0xffa7c000-0xffa7ffff window] (subtractive decode)
[    0.187148] pci_bus 0000:00: on NUMA node 0
[    0.200545] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[    0.201090] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[    0.201617] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[    0.202141] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[    0.202705] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[    0.203220] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[    0.203753] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[    0.204461] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[    0.205080] SCSI subsystem initialized
[    0.205147] libata version 3.00 loaded.
[    0.205178] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.205178] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.205178] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.205178] vgaarb: loaded
[    0.205178] ACPI: bus type USB registered
[    0.205178] usbcore: registered new interface driver usbfs
[    0.205178] usbcore: registered new interface driver hub
[    0.205178] usbcore: registered new device driver usb
[    0.205178] EDAC MC: Ver: 3.0.0
[    0.205178] PCI: Using ACPI for IRQ routing
[    0.205747] PCI: pci_cache_line_size set to 64 bytes
[    0.205819] e820: reserve RAM buffer [mem 0x3fe8ac00-0x3fffffff]
[    0.206000] NetLabel: Initializing
[    0.206002] NetLabel:  domain hash size = 128
[    0.206003] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.206025] NetLabel:  unlabeled traffic allowed by default
[    0.208661] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.208667] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.208674] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.210709] clocksource: Switched to clocksource hpet
[    0.230128] VFS: Disk quotas dquot_6.6.0
[    0.230161] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.230350] AppArmor: AppArmor Filesystem Enabled
[    0.230402] pnp: PnP ACPI init
[    0.232992] pnp 00:00: disabling [io  0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x0800-0x087f]
[    0.232995] pnp 00:00: disabling [io  0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io  0x0800-0x087f]
[    0.233063] system 00:00: [io  0x0c00-0x0c7f] has been reserved
[    0.233073] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.233263] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.241635] pnp 00:02: [dma 0 disabled]
[    0.242700] pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.245762] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.257773] system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.257776] system 00:04: [mem 0x00100000-0x00ffffff] could not be reserved
[    0.257780] system 00:04: [mem 0x01000000-0x3fe8abff] could not be reserved
[    0.257783] system 00:04: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.257786] system 00:04: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.257789] system 00:04: [mem 0xfec00000-0xfecfffff] could not be reserved
[    0.257792] system 00:04: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.257796] system 00:04: [mem 0xfed20000-0xfed9ffff] has been reserved
[    0.257799] system 00:04: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.257802] system 00:04: [mem 0xffc00000-0xffffffff] has been reserved
[    0.257811] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.258260] system 00:05: [mem 0xe0000000-0xe3ffffff] has been reserved
[    0.258264] system 00:05: [mem 0xfeda0000-0xfedacfff] has been reserved
[    0.258272] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.258279] pnp: PnP ACPI: found 6 devices
[    0.258284] PnPBIOS: Disabled by ACPI PNP
[    0.296571] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.296599] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.296604] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.296614] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.296619] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.296628] pci 0000:00:1c.5: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.296632] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.296660] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[    0.296670] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.296679] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.296684] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.296688] pci 0000:00:1c.4: BAR 13: assigned [io  0x2000-0x2fff]
[    0.296694] pci 0000:00:1c.5: BAR 13: assigned [io  0x3000-0x3fff]
[    0.296699] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.296705] pci 0000:00:01.0:   bridge window [mem 0xfc000000-0xfeafffff]
[    0.296709] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[    0.296714] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.296718] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.296723] pci 0000:00:1c.0:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.296727] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff 64bit pref]
[    0.296734] pci 0000:00:1c.4: PCI bridge to [bus 03]
[    0.296737] pci 0000:00:1c.4:   bridge window [io  0x2000-0x2fff]
[    0.296743] pci 0000:00:1c.4:   bridge window [mem 0xfbe00000-0xfbefffff]
[    0.296747] pci 0000:00:1c.4:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.296754] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.296757] pci 0000:00:1c.5:   bridge window [io  0x3000-0x3fff]
[    0.296763] pci 0000:00:1c.5:   bridge window [mem 0xfbd00000-0xfbdfffff]
[    0.296767] pci 0000:00:1c.5:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.296774] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.296778] pci 0000:00:1e.0:   bridge window [io  0xd000-0xdfff]
[    0.296783] pci 0000:00:1e.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
[    0.296793] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.296796] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.296799] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.296801] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff window]
[    0.296804] pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff window]
[    0.296806] pci_bus 0000:00: resource 9 [mem 0x80000000-0xdfffffff window]
[    0.296809] pci_bus 0000:00: resource 10 [mem 0xe4000000-0xfebfffff window]
[    0.296811] pci_bus 0000:00: resource 11 [mem 0xffa80800-0xffa80bff window]
[    0.296814] pci_bus 0000:00: resource 12 [mem 0xffa7c000-0xffa7ffff window]
[    0.296816] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfeafffff]
[    0.296819] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
[    0.296822] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.296824] pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
[    0.296827] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[    0.296829] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.296832] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
[    0.296834] pci_bus 0000:03: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.296837] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.296839] pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff]
[    0.296842] pci_bus 0000:04: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.296845] pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
[    0.296847] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
[    0.296850] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.296852] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.296855] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.296857] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000effff window]
[    0.296860] pci_bus 0000:05: resource 8 [mem 0x000f0000-0x000fffff window]
[    0.296862] pci_bus 0000:05: resource 9 [mem 0x80000000-0xdfffffff window]
[    0.296865] pci_bus 0000:05: resource 10 [mem 0xe4000000-0xfebfffff window]
[    0.296867] pci_bus 0000:05: resource 11 [mem 0xffa80800-0xffa80bff window]
[    0.296870] pci_bus 0000:05: resource 12 [mem 0xffa7c000-0xffa7ffff window]
[    0.296947] NET: Registered protocol family 2
[    0.297251] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.297275] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.297311] TCP: Hash tables configured (established 8192 bind 8192)
[    0.297365] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.297375] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.297450] NET: Registered protocol family 1
[    0.300573] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.300591] PCI: CLS 64 bytes, default 64
[    0.300679] Unpacking initramfs...
[    1.579604] Freeing initrd memory: 50836K
[    1.579892] Scanning for low memory corruption every 60 seconds
[    1.580798] Initialise system trusted keyrings
[    1.580811] Key type blacklist registered
[    1.580901] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    1.583423] zbud: loaded
[    1.584027] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.584341] fuse init (API version 7.26)
[    1.586719] Key type asymmetric registered
[    1.586721] Asymmetric key parser 'x509' registered
[    1.586740] bounce: pool size: 64 pages
[    1.586757] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.586814] io scheduler noop registered
[    1.586816] io scheduler deadline registered
[    1.586909] io scheduler cfq registered (default)
[    1.589050] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    1.589052] vesafb: scrolling: redraw
[    1.589055] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.589080] vesafb: framebuffer at 0xf0000000, mapped to 0x(ptrval), using 3072k, total 3072k
[    1.589248] Console: switching to colour frame buffer device 128x48
[    1.589273] fb0: VESA VGA frame buffer device
[    1.589409] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.589439] ACPI: Power Button [VBTN]
[    1.589521] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.589554] ACPI: Power Button [PWRF]
[    1.589902] isapnp: Scanning for PnP cards...
[    1.592259] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.612791] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.616675] Linux agpgart interface v0.103
[    1.641381] loop: module loaded
[    1.641616] ata_piix 0000:00:1f.1: version 2.13
[    1.642537] scsi host0: ata_piix
[    1.642685] scsi host1: ata_piix
[    1.642753] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.642755] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.642912] libphy: Fixed MDIO Bus: probed
[    1.642914] tun: Universal TUN/TAP device driver, 1.6
[    1.642997] PPP generic driver version 2.4.2
[    1.643073] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.643078] ehci-pci: EHCI PCI platform driver
[    1.643462] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.643472] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.643487] ehci-pci 0000:00:1d.7: debug port 1
[    1.647381] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.647401] ehci-pci 0000:00:1d.7: irq 21, io mem 0xffa80800
[    1.647607] ata2: port disabled--ignoring
[    1.660021] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.660132] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.660136] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.660139] usb usb1: Product: EHCI Host Controller
[    1.660141] usb usb1: Manufacturer: Linux 4.15.0-45-generic ehci_hcd
[    1.660143] usb usb1: SerialNumber: 0000:00:1d.7
[    1.660329] hub 1-0:1.0: USB hub found
[    1.660342] hub 1-0:1.0: 8 ports detected
[    1.660699] ehci-platform: EHCI generic platform driver
[    1.660716] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.660726] ohci-pci: OHCI PCI platform driver
[    1.660745] ohci-platform: OHCI generic platform driver
[    1.660756] uhci_hcd: USB Universal Host Controller Interface driver
[    1.661083] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.661091] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.661099] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.661121] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
[    1.661218] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.661221] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.661223] usb usb2: Product: UHCI Host Controller
[    1.661225] usb usb2: Manufacturer: Linux 4.15.0-45-generic uhci_hcd
[    1.661227] usb usb2: SerialNumber: 0000:00:1d.0
[    1.661394] hub 2-0:1.0: USB hub found
[    1.661407] hub 2-0:1.0: 2 ports detected
[    1.661912] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.661920] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.661927] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.661961] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
[    1.662054] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.662057] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.662059] usb usb3: Product: UHCI Host Controller
[    1.662061] usb usb3: Manufacturer: Linux 4.15.0-45-generic uhci_hcd
[    1.662063] usb usb3: SerialNumber: 0000:00:1d.1
[    1.662237] hub 3-0:1.0: USB hub found
[    1.662250] hub 3-0:1.0: 2 ports detected
[    1.662749] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.662757] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.662764] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.662794] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[    1.662876] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.662879] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.662881] usb usb4: Product: UHCI Host Controller
[    1.662883] usb usb4: Manufacturer: Linux 4.15.0-45-generic uhci_hcd
[    1.662885] usb usb4: SerialNumber: 0000:00:1d.2
[    1.663049] hub 4-0:1.0: USB hub found
[    1.663061] hub 4-0:1.0: 2 ports detected
[    1.663551] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.663559] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.663566] uhci_hcd 0000:00:1d.3: detected 2 ports
[    1.663596] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
[    1.663681] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.663684] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.663686] usb usb5: Product: UHCI Host Controller
[    1.663688] usb usb5: Manufacturer: Linux 4.15.0-45-generic uhci_hcd
[    1.663690] usb usb5: SerialNumber: 0000:00:1d.3
[    1.663857] hub 5-0:1.0: USB hub found
[    1.663868] hub 5-0:1.0: 2 ports detected
[    1.664143] i8042: PNP: No PS/2 controller found.
[    1.664144] i8042: Probing ports directly.
[    1.667149] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.667157] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.667362] mousedev: PS/2 mouse device common for all mice
[    1.667571] rtc_cmos 00:01: RTC can wake from S4
[    1.667709] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    1.667737] rtc_cmos 00:01: alarms up to one day, 242 bytes nvram, hpet irqs
[    1.667751] i2c /dev entries driver
[    1.667759] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[    1.667921] device-mapper: uevent: version 1.0.3
[    1.668039] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[    1.668078] platform eisa.0: Probing EISA bus 0
[    1.668082] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.668085] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.668088] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.668090] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.668093] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.668095] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.668097] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.668100] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.668102] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.668104] platform eisa.0: EISA: Detected 0 cards
[    1.668112] cpufreq_nforce2: No nForce2 chipset
[    1.684029] ledtrig-cpu: registered to indicate activity on CPUs
[    1.684381] NET: Registered protocol family 10
[    1.694290] Segment Routing with IPv6
[    1.694327] NET: Registered protocol family 17
[    1.694408] Key type dns_resolver registered
[    1.769673] microcode: sig=0xf62, pf=0x4, revision=0xf
[    1.769735] microcode: Microcode Update Driver: v2.2.
[    1.769742] Using IPI No-Shortcut mode
[    1.769752] sched_clock: Marking stable (1768005500, 0)->(1852799741, -84794241)
[    1.770031] registered taskstats version 1
[    1.770047] Loading compiled-in X.509 certificates
[    1.779599] Loaded X.509 cert 'Build time autogenerated kernel key: 25de7c8a1a64d03a22c6a5e01cefe9d7e1176c27'
[    1.779628] zswap: loaded using pool lzo/zbud
[    1.785522] Key type big_key registered
[    1.785530] Key type trusted registered
[    1.788390] Key type encrypted registered
[    1.788395] AppArmor: AppArmor sha1 policy hashing enabled
[    1.788399] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    1.788407] ima: Allocated hash algorithm: sha1
[    1.788437] evm: HMAC attrs: 0x1
[    1.788791]   Magic number: 7:630:691
[    1.788837] pci_express 0000:00:1c.4:pcie008: hash matches
[    1.788925] rtc_cmos 00:01: setting system clock to 2019-02-11 16:39:48 UTC (1549903188)
[    1.789085] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.789086] EDD information not available.
[    1.824322] ata1.00: ATAPI: HL-DT-ST CD-RW/DVD-ROM GCC-4482B, E107, max UDMA/33
[    1.848201] ata1.00: configured for UDMA/33
[    1.899772] isapnp: No Plug & Play device found
[    1.900493] scsi 0:0:0:0: CD-ROM            HL-DT-ST CDRW/DVD GCC4482 E107 PQ: 0 ANSI: 5
[    1.956888] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    1.956890] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.957090] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.957189] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.959893] Freeing unused kernel memory: 1092K
[    1.972098] Write protecting the kernel text: 8840k
[    1.972160] Write protecting the kernel read-only data: 3480k
[    1.972162] NX-protecting the kernel data: 7544k
[    1.972432] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.997761] usb 1-3: new high-speed USB device number 2 using ehci-pci
[    2.190428] pps_core: LinuxPPS API ver. 1 registered
[    2.190430] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.219125] PTP clock support registered
[    2.219751] ahci 0000:00:1f.2: version 3.0
[    2.220277] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    2.220281] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
[    2.229878] usb 1-3: New USB device found, idVendor=0644, idProduct=0200
[    2.229881] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.229883] usb 1-3: Product: CA-200
[    2.229886] usb 1-3: Manufacturer: TEAC
[    2.229888] usb 1-3: SerialNumber: 000001046BAB
[    2.240383] scsi host2: ahci
[    2.248113] scsi host3: ahci
[    2.251159] tg3.c:v3.137 (May 11, 2014)
[    2.256739] scsi host4: ahci
[    2.262862] scsi host5: ahci
[    2.262976] ata3: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd00 irq 24
[    2.262979] ata4: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbd80 irq 24
[    2.262982] ata5: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe00 irq 24
[    2.262984] ata6: SATA max UDMA/133 abar m1024@0xfebfbc00 port 0xfebfbe80 irq 24
[    2.272631] firewire_ohci 0000:05:02.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[    2.278113] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM95721A211) rev 4101] (PCI Express) MAC address 00:10:18:18:66:8a
[    2.278118] tg3 0000:03:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.278121] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.278124] tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.297748] tg3 0000:04:00.0 eth1: Tigon3 [partno(BCM5751PKFBG) rev 4001] (PCI Express) MAC address 00:13:72:18:f3:60
[    2.297752] tg3 0000:04:00.0 eth1: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.297756] tg3 0000:04:00.0 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.297759] tg3 0000:04:00.0 eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.311114] tg3 0000:03:00.0 enp3s0: renamed from eth0
[    2.338383] tg3 0000:04:00.0 enp4s0: renamed from eth1
[    2.498691] checking generic (f0000000 300000) vs hw (f0000000 8000000)
[    2.498693] fb: switching to nouveaufb from VESA VGA
[    2.498733] Console: switching to colour dummy device 80x25
[    2.499767] nouveau 0000:01:00.0: NVIDIA NV42 (042e00a1)
[    2.521658] nouveau 0000:01:00.0: bios: version 05.41.02.43.09
[    2.523349] nouveau 0000:01:00.0: fb: 128 MiB DDR1
[    2.540095] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[    2.560143] [TTM] Zone  kernel: Available graphics memory: 441216 kiB
[    2.560145] [TTM] Zone highmem: Available graphics memory: 510104 kiB
[    2.560146] [TTM] Initializing pool allocator
[    2.560153] [TTM] Initializing DMA pool allocator
[    2.560176] nouveau 0000:01:00.0: DRM: VRAM: 123 MiB
[    2.560178] nouveau 0000:01:00.0: DRM: GART: 512 MiB
[    2.560183] nouveau 0000:01:00.0: DRM: TMDS table version 1.1
[    2.560185] nouveau 0000:01:00.0: DRM: DCB version 3.0
[    2.560189] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000300 00000028
[    2.560193] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00000000
[    2.560196] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011310 00000028
[    2.560199] nouveau 0000:01:00.0: DRM: DCB outp 03: 04011312 00000000
[    2.560201] nouveau 0000:01:00.0: DRM: DCB conn 00: 1030
[    2.560204] nouveau 0000:01:00.0: DRM: DCB conn 01: 2130
[    2.560206] nouveau 0000:01:00.0: DRM: DCB conn 02: 0260
[    2.562165] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.562166] [drm] Driver supports precise vblank timestamp query.
[    2.563934] nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
[    2.580472] ata4: SATA link down (SStatus 0 SControl 300)
[    2.580505] ata6: SATA link down (SStatus 0 SControl 300)
[    2.580533] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.580554] ata5: SATA link down (SStatus 0 SControl 300)
[    2.585523] ata3.00: ATA-7: SAMSUNG HD160JJ/P, ZM100-34, max UDMA7
[    2.585526] ata3.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 31/32), AA
[    2.590542] ata3.00: configured for UDMA/133
[    2.590746] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD160JJ/ 0-34 PQ: 0 ANSI: 5
[    2.591210] sd 2:0:0:0: [sda] 312500000 512-byte logical blocks: (160 GB/149 GiB)
[    2.591232] sd 2:0:0:0: [sda] Write Protect is off
[    2.591236] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.591272] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.591704] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    2.593500] tsc: Refined TSC clocksource calibration: 3191.999 MHz
[    2.593509] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e02c398820, max_idle_ns: 440795273435 ns
[    2.622690]  sda: sda1 sda2 sda3 < sda5 >
[    2.623325] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.636408] nouveau 0000:01:00.0: DRM: allocated 1360x768 fb: 0x9000, bo (ptrval)
[    2.640226] fbcon: nouveaufb (fb0) is primary device
[    2.640325] Console: switching to colour frame buffer device 170x48
[    2.640357] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    2.680156] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    2.737142] usb 4-1: New USB device found, idVendor=046d, idProduct=c517
[    2.737145] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.737148] usb 4-1: Product: USB Receiver
[    2.737150] usb 4-1: Manufacturer: Logitech
[    2.756361] hidraw: raw HID events driver (C) Jiri Kosina
[    2.780259] firewire_core 0000:05:02.0: created device fw0: GUID 0000d100812ecdc5, S400
[    2.810797] usbcore: registered new interface driver usbhid
[    2.810799] usbhid: USB HID core driver
[    2.829167] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/0003:046D:C517.0001/input/input5
[    2.888261] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-1/input0
[    2.888297] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[    2.890734] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.1/0003:046D:C517.0002/input/input6
[    2.948407] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-1/input1
[    3.124103] usb 1-8: new high-speed USB device number 4 using ehci-pci
[    3.285527] usb 1-8: New USB device found, idVendor=04e8, idProduct=6860
[    3.285530] usb 1-8: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[    3.285533] usb 1-8: Product: SAMSUNG_Android
[    3.285535] usb 1-8: Manufacturer: SAMSUNG
[    3.285538] usb 1-8: SerialNumber: 000979ad49758f
[    3.443414] usb-storage 1-3:1.0: USB Mass Storage device detected
[    3.443591] scsi host6: usb-storage 1-3:1.0
[    3.443738] usbcore: registered new interface driver usb-storage
[    3.451800] usbcore: registered new interface driver uas
[    3.494684] random: fast init done
[    3.612172] clocksource: Switched to clocksource tsc
[    3.654850] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    4.454198] scsi 6:0:0:0: Direct-Access     TEAC     USB   HS-CF Card 4.00 PQ: 0 ANSI: 0
[    4.457923] scsi 6:0:0:1: Direct-Access     TEAC     USB   HS-xD/SM   4.00 PQ: 0 ANSI: 0
[    4.461670] scsi 6:0:0:2: Direct-Access     TEAC     USB   HS-MS Card 4.00 PQ: 0 ANSI: 0
[    4.465046] scsi 6:0:0:3: Direct-Access     TEAC     USB   HS-SD Card 4.00 PQ: 0 ANSI: 0
[    4.465473] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    4.465740] sd 6:0:0:1: Attached scsi generic sg3 type 0
[    4.465987] sd 6:0:0:2: Attached scsi generic sg4 type 0
[    4.466239] sd 6:0:0:3: Attached scsi generic sg5 type 0
[    4.549539] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    4.554539] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[    4.559160] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[    4.563412] sd 6:0:0:3: [sde] Attached SCSI removable disk
[    5.401028] random: crng init done
[    6.663646] ip_tables: (C) 2000-2006 Netfilter Core Team
[    6.940382] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    6.940598] systemd[1]: Detected architecture x86.
[    6.951934] systemd[1]: Set hostname to <78BOBSSOL2>.
[   10.376004] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.376477] systemd[1]: Created slice System Slice.
[   10.376607] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   10.376730] systemd[1]: Listening on fsck to fsckd communication Socket.
[   10.376851] systemd[1]: Listening on Syslog Socket.
[   10.377012] systemd[1]: Listening on Journal Socket.
[   10.378436] systemd[1]: Mounting Huge Pages File System...
[   11.547205] lp: driver loaded but no devices found
[   11.876449] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   11.909164] ppdev: user-space parallel port driver
[   11.957178] parport_pc 00:02: reported by Plug and Play ACPI
[   11.957261] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
[   12.041531] systemd[1]: Starting Load/Save Random Seed...
[   12.041734] systemd[1]: Started Journal Service.
[   12.052211] lp0: using parport0 (interrupt-driven).
[   12.215823] systemd-journald[241]: Received request to flush runtime journal from PID 1
[   13.330481] Adding 1130008k swap on /swapfile.  Priority:-2 extents:5 across:1162776k FS
[   29.649807] audit: type=1400 audit(1549903216.355:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=320 comm="apparmor_parser"
[   29.649815] audit: type=1400 audit(1549903216.355:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=320 comm="apparmor_parser"
[   29.649819] audit: type=1400 audit(1549903216.355:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=320 comm="apparmor_parser"
[   29.649823] audit: type=1400 audit(1549903216.355:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=320 comm="apparmor_parser"
[   29.650321] audit: type=1400 audit(1549903216.355:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=319 comm="apparmor_parser"
[   29.650327] audit: type=1400 audit(1549903216.355:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=319 comm="apparmor_parser"
[   29.653772] audit: type=1400 audit(1549903216.359:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=323 comm="apparmor_parser"
[   29.653778] audit: type=1400 audit(1549903216.359:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=323 comm="apparmor_parser"
[   29.653782] audit: type=1400 audit(1549903216.359:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=323 comm="apparmor_parser"
[   29.659420] audit: type=1400 audit(1549903216.363:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=324 comm="apparmor_parser"
[   30.043303] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   30.147994] intel_rng: Firmware space is locked read-only. If you can't or
               intel_rng: don't want to disable this in firmware setup, and if
               intel_rng: you are certain that your system has a functional
               intel_rng: RNG, try using the 'no_fwh_detect' option.
[   30.222909] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x000000000000082D (\GLBC) (20170831/utaddress-247)
[   30.222920] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x000000000000082A-0x000000000000082A (\SACT) (20170831/utaddress-247)
[   30.222926] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000828-0x0000000000000828 (\SSTS) (20170831/utaddress-247)
[   30.222932] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   30.222987] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   30.241453] leds_ss4200: no LED devices found
[   30.246547] gameport gameport0: EMU10K1 is pci0000:05:04.1/gameport0, io 0xdcd8, speed 900kHz
[   30.499858] snd_hda_codec_idt hdaudioC0D0: autoconfig for STAC9200: line_outs=1 (0xe/0x0/0x0/0x0/0x0) type:line
[   30.499864] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=1 (0x11/0x0/0x0/0x0/0x0)
[   30.499867] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xd/0x0/0x0/0x0/0x0)
[   30.499869] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[   30.499871] snd_hda_codec_idt hdaudioC0D0:    inputs:
[   30.499875] snd_hda_codec_idt hdaudioC0D0:      Rear Mic=0x10
[   30.499878] snd_hda_codec_idt hdaudioC0D0:      Front Mic=0xf
[   30.499880] snd_hda_codec_idt hdaudioC0D0:      Line=0x12
[   30.516828] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   30.516940] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   30.517045] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   30.517147] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   30.811635] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   30.828282] kvm: disabled by bios
[   30.861941] kvm: disabled by bios
[   30.885090] intel_powerclamp: No package C-state available
[   30.908930] intel_powerclamp: No package C-state available
[   30.958475] gpio_ich: GPIO from 462 to 511 on gpio_ich
[   41.114592] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   41.153158] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   41.163575] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   41.195840] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   63.421346] usb 1-8: USB disconnect, device number 4
[   63.800094] usb 1-8: new high-speed USB device number 5 using ehci-pci
[   63.957294] usb 1-8: New USB device found, idVendor=04e8, idProduct=6863
[   63.957298] usb 1-8: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[   63.957301] usb 1-8: Product: SAMSUNG_Android
[   63.957303] usb 1-8: Manufacturer: SAMSUNG
[   63.957305] usb 1-8: SerialNumber: 000979ad49758f
[   64.000926] usbcore: registered new interface driver cdc_ether
[   64.011486] rndis_host 1-8:1.0 usb0: register 'rndis_host' at usb-0000:00:1d.7-8, RNDIS device, 8a:ae:7e:cc:01:a4
[   64.013104] usbcore: registered new interface driver rndis_host
[   64.034881] rndis_host 1-8:1.0 enp0s29f7u8: renamed from usb0
[   64.053713] IPv6: ADDRCONF(NETDEV_UP): enp0s29f7u8: link is not ready
mike@78BOBSSOL2:~$ 

J'ai aussi fait un

lspci
00:00.0 Host bridge: Intel Corporation 82955X Memory Controller Hub
00:01.0 PCI bridge: Intel Corporation 82955X PCI Express Root Port
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01)
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 SATA controller: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] (rev 01)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
01:00.0 VGA compatible controller: NVIDIA Corporation NV41GL [Quadro FX 1400] (rev a2)
03:00.0 Ethernet controller: Broadcom Limited NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 11)
04:00.0 Ethernet controller: Broadcom Limited NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
05:02.0 FireWire (IEEE 1394): LSI Corporation FW322/323 [TrueFire] 1394a Controller (rev 61)
05:04.0 Multimedia audio controller: Creative Labs EMU10k1 [Sound Blaster Live! Series] (rev 0a)
05:04.1 Input device controller: Creative Labs SB Live! Game Port (rev 0a)

en complément, j'ai installé lilo et j'ai essayé avec un cd, le cd est reconnu, mais pas le dvd...

Merci pour votre aide

Dernière modification par MadOff (Le 12/02/2019, à 11:11)

Hors ligne

#2 Le 11/02/2019, à 19:53

xubu1957

Re : Graveur DVD-RW non reconnu [Alternative]

Bonjour,

Donne :

sudo lshw -C disk 

piqué dans > Lecteur DVD non trouvé [RESOLU]


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 18.04.1 LTS - Lenovo T410 -Toshiba Satellite A300  Membre de Linux-Azur

En ligne

#3 Le 11/02/2019, à 21:21

MadOff

Re : Graveur DVD-RW non reconnu [Alternative]

Voici

$ sudo lshw -C disk
[sudo] Mot de passe de mike : 
  *-disk:0                  
       description: SCSI Disk
       produit: USB   HS-CF Card
       fabriquant: TEAC
       identifiant matériel: 0.0.0
       information bus: scsi@6:0.0.0
       nom logique: /dev/sdb
       version: 4.00
       fonctionnalités: removable
       configuration: logicalsectorsize=512 sectorsize=512
     *-medium
          identifiant matériel: 0
          nom logique: /dev/sdb
  *-disk:1
       description: SCSI Disk
       produit: USB   HS-xD/SM
       fabriquant: TEAC
       identifiant matériel: 0.0.1
       information bus: scsi@6:0.0.1
       nom logique: /dev/sdc
       version: 4.00
       fonctionnalités: removable
       configuration: logicalsectorsize=512 sectorsize=512
     *-medium
          identifiant matériel: 0
          nom logique: /dev/sdc
  *-disk:2
       description: SCSI Disk
       produit: USB   HS-MS Card
       fabriquant: TEAC
       identifiant matériel: 0.0.2
       information bus: scsi@6:0.0.2
       nom logique: /dev/sdd
       version: 4.00
       numéro de série: 3
       fonctionnalités: removable
       configuration: logicalsectorsize=512 sectorsize=512
     *-medium
          identifiant matériel: 0
          nom logique: /dev/sdd
  *-disk:3
       description: SCSI Disk
       produit: USB   HS-SD Card
       fabriquant: TEAC
       identifiant matériel: 0.0.3
       information bus: scsi@6:0.0.3
       nom logique: /dev/sde
       version: 4.00
       fonctionnalités: removable
       configuration: logicalsectorsize=512 sectorsize=512
     *-medium
          identifiant matériel: 0
          nom logique: /dev/sde
  *-cdrom
       description: DVD reader
       produit: CDRW/DVD GCC4482
       fabriquant: HL-DT-ST
       identifiant matériel: 0.0.0
       information bus: scsi@0:0.0.0
       nom logique: /dev/cdrom
       nom logique: /dev/cdrw
       nom logique: /dev/dvd
       nom logique: /dev/sr0
       version: E107
       fonctionnalités: removable audio cd-r cd-rw dvd
       configuration: ansiversion=5 status=nodisc
  *-disk
       description: ATA Disk
       produit: SAMSUNG HD160JJ/
       identifiant matériel: 0.0.0
       information bus: scsi@2:0.0.0
       nom logique: /dev/sda
       version: 0-34
       numéro de série: S0DFJ1HL499576
       taille: 149GiB (160GB)
       fonctionnalités: partitioned partitioned:dos
       configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=eede9d79

DU coup j'ai aussi fait :

udisksctl status
MODEL                     REVISION  SERIAL               DEVICE
--------------------------------------------------------------------------
SAMSUNG HD160JJ/P         ZM100-34  S0DFJ1HL499576       sda     
HL-DT-ST CD-RW/DVD-ROM GCC-4482B E107      HL-DT-ST_CD-RW_DVD-ROM_GCC-4482B sr0     
TEAC USB   HS-CF Card     4.00      000001046BAB         sdb     
TEAC USB   HS-xD/SM       4.00      000001046BAB         sdc     
TEAC USB   HS-MS Card     4.00      000001046BAB         sdd     
TEAC USB   HS-SD Card     4.00      000001046BAB         sde     

et

lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 82955X Memory Controller Hub [8086:2774]
00:01.0 PCI bridge [0604]: Intel Corporation 82955X PCI Express Root Port [8086:2775]
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 01)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 [8086:27e0] (rev 01)
00:1c.5 PCI bridge [0604]: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 [8086:27e2] (rev 01)
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 01)
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 01)
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 01)
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 01)
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01)
00:1f.2 SATA controller [0106]: Intel Corporation NM10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 01)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV41GL [Quadro FX 1400] [10de:00ce] (rev a2)
03:00.0 Ethernet controller [0200]: Broadcom Limited NetXtreme BCM5721 Gigabit Ethernet PCI Express [14e4:1659] (rev 11)
04:00.0 Ethernet controller [0200]: Broadcom Limited NetXtreme BCM5751 Gigabit Ethernet PCI Express [14e4:1677] (rev 01)
05:02.0 FireWire (IEEE 1394) [0c00]: LSI Corporation FW322/323 [TrueFire] 1394a Controller [11c1:5811] (rev 61)
05:04.0 Multimedia audio controller [0401]: Creative Labs EMU10k1 [Sound Blaster Live! Series] [1102:0002] (rev 0a)
05:04.1 Input device controller [0980]: Creative Labs SB Live! Game Port [1102:7002] (rev 0a)
mike@78BOBSSOL2:~$ cat /proc/sys/dev/cdrom/info
CD-ROM information, Id: cdrom.c 3.20 2003/12/17

drive name:		sr0
drive speed:		48
drive # of slots:	1
Can close tray:		1
Can open tray:		1
Can lock tray:		1
Can change speed:	1
Can select disk:	0
Can read multisession:	1
Can read MCN:		1
Reports media changed:	1
Can play audio:		1
Can write CD-R:		1
Can write CD-RW:	1
Can read DVD:		1
Can write DVD-R:	0
Can write DVD-RAM:	0
Can read MRW:		1
Can write MRW:		1
Can write RAM:		1

Dernière modification par MadOff (Le 11/02/2019, à 21:31)

Hors ligne

#4 Le 11/02/2019, à 21:34

xubu1957

Re : Graveur DVD-RW non reconnu [Alternative]

-cdrom
       description: DVD reader
       produit: CDRW/DVD GCC4482

Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 18.04.1 LTS - Lenovo T410 -Toshiba Satellite A300  Membre de Linux-Azur

En ligne

#5 Le 11/02/2019, à 22:05

MadOff

Re : Graveur DVD-RW non reconnu [Alternative]

Je ne comprends pas ton message que veux tu dire ?

Hors ligne

#6 Le 11/02/2019, à 22:16

xubu1957

Re : Graveur DVD-RW non reconnu [Alternative]

Le lecteur est identifié, mais je n'ai pas trouvé de réponse intéressante sur la Toile pour ce modèle.


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 18.04.1 LTS - Lenovo T410 -Toshiba Satellite A300  Membre de Linux-Azur

En ligne

#7 Le 11/02/2019, à 22:23

MadOff

Re : Graveur DVD-RW non reconnu [Alternative]

ok merci, en appartée, comment revenir à grub et sortir de lilo24, car j'ai perdu mon boot sequence lubuntu win xp

Hors ligne

#8 Le 11/02/2019, à 22:34

xubu1957

Re : Graveur DVD-RW non reconnu [Alternative]

Je ne connais pas Lilo24, je viens de trouver cette page > [SOLVED] LILO only booting one OS
_ _ _

Notre Doc > lilo#utilisation


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 18.04.1 LTS - Lenovo T410 -Toshiba Satellite A300  Membre de Linux-Azur

En ligne

#9 Le 11/02/2019, à 22:41

MadOff

Re : Graveur DVD-RW non reconnu [Alternative]

oui j'avais vu, mais je souhaiterais revenir avec grub, mais update grub ne fait rien.
Et il n'explique pas comment récuperer le dual boot, mais juste l'accélérer...
Sais tu comment récupérer grub ?

Dernière modification par MadOff (Le 11/02/2019, à 22:42)

Hors ligne

#10 Le 11/02/2019, à 23:01

xubu1957

Re : Graveur DVD-RW non reconnu [Alternative]

Je ne sais pas !

Ouvre une nouvelle discussion.


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 18.04.1 LTS - Lenovo T410 -Toshiba Satellite A300  Membre de Linux-Azur

En ligne

#11 Le 11/02/2019, à 23:27

MadOff

Re : Graveur DVD-RW non reconnu [Alternative]

je te remercie, j'ai fais un boot-repair et cela a marché.
J'ai changé, le graveur dvd, par un lecteur simple. Du coup le dvd est reconnu, mais lorsque je lance avec vlc ou gnome, ça démarre sec et ça stop.
j'ai repris les éléments suivants :

sudo lshw -C disk
[sudo] Mot de passe de mike : 
  *-disk:0                  
       description: SCSI Disk
       produit: USB   HS-CF Card
       fabriquant: TEAC
       identifiant matériel: 0.0.0
       information bus: scsi@6:0.0.0
       nom logique: /dev/sdb
       version: 4.00
       fonctionnalités: removable
       configuration: logicalsectorsize=512 sectorsize=512
     *-medium
          identifiant matériel: 0
          nom logique: /dev/sdb
  *-disk:1
       description: SCSI Disk
       produit: USB   HS-xD/SM
       fabriquant: TEAC
       identifiant matériel: 0.0.1
       information bus: scsi@6:0.0.1
       nom logique: /dev/sdc
       version: 4.00
       fonctionnalités: removable
       configuration: logicalsectorsize=512 sectorsize=512
     *-medium
          identifiant matériel: 0
          nom logique: /dev/sdc
  *-disk:2
       description: SCSI Disk
       produit: USB   HS-MS Card
       fabriquant: TEAC
       identifiant matériel: 0.0.2
       information bus: scsi@6:0.0.2
       nom logique: /dev/sdd
       version: 4.00
       numéro de série: 3
       fonctionnalités: removable
       configuration: logicalsectorsize=512 sectorsize=512
     *-medium
          identifiant matériel: 0
          nom logique: /dev/sdd
  *-disk:3
       description: SCSI Disk
       produit: USB   HS-SD Card
       fabriquant: TEAC
       identifiant matériel: 0.0.3
       information bus: scsi@6:0.0.3
       nom logique: /dev/sde
       version: 4.00
       fonctionnalités: removable
       configuration: logicalsectorsize=512 sectorsize=512
     *-medium
          identifiant matériel: 0
          nom logique: /dev/sde
  *-cdrom
       description: DVD reader
       produit: DVD-ROM PX-116A
       fabriquant: PLEXTOR
       identifiant matériel: 0.0.0
       information bus: scsi@0:0.0.0
       nom logique: /dev/cdrom
       nom logique: /dev/dvd
       nom logique: /dev/sr0
       nom logique: /media/cdrom
       version: 1.00
       fonctionnalités: removable audio dvd
       configuration: ansiversion=5 mount.fstype=udf mount.options=ro,nosuid,nodev,relatime,utf8 state=mounted status=ready
     *-medium
          identifiant matériel: 0
          nom logique: /dev/cdrom
          nom logique: /media/cdrom
          configuration: mount.fstype=udf mount.options=ro,nosuid,nodev,relatime,utf8 state=mounted
  *-disk
       description: ATA Disk
       produit: SAMSUNG HD160JJ/
       identifiant matériel: 0.0.0
       information bus: scsi@2:0.0.0
       nom logique: /dev/sda
       version: 0-34
       numéro de série: S0DFJ1HL499576
       taille: 149GiB (160GB)
       fonctionnalités: partitioned partitioned:dos
       configuration: ansiversion=5 logicalsectorsize=512 sectorsize=512 signature=eede9d79

Hors ligne

#12 Le 11/02/2019, à 23:35

MadOff

Re : Graveur DVD-RW non reconnu [Alternative]

et j'ai un

sudo dpkg-reconfigure libdvd-pkg
dpkg-query: le paquet « libdvd-pkg » n'est pas installé et aucune information n'est disponible
Utilisez dpkg --info (= dpkg-deb --info) pour examiner les fichiers
archives, et dpkg --contents (= dpkg-deb --contents) pour afficher leur
contenu.
/usr/sbin/dpkg-reconfigure: libdvd-pkg n'est pas installé

qui me semble bloquant

Hors ligne

#13 Le 12/02/2019, à 07:23

xubu1957

Re : Graveur DVD-RW non reconnu [Alternative]

Bonjour,

sudo apt install libdvd-pkg

La Doc > lire_un_dvd#via_les_depots_ubuntu


Important : Pensez à passer vos sujets en [Résolu] lorsque ceux-ci le sont, au début du titre en cliquant sur Modifier sous le premier message, et un bref récapitulatif de la solution à la fin de celui-ci. Merci.

Xubuntu 18.04.1 LTS - Lenovo T410 -Toshiba Satellite A300  Membre de Linux-Azur

En ligne

#14 Le 12/02/2019, à 11:10

MadOff

Re : Graveur DVD-RW non reconnu [Alternative]

alors j'ai fait ça et c'est ok.

sudo dpkg-reconfigure libdvd-pkg

Hors ligne