Ubuntu-fr

butnuu74

!wiki ati : méthode 1 marche pas ni la méthode 2 ?

bonjour
je perds espoir de faire tourner Ubuntu Breezy x386 correctement sur mon Ati Radeon 9500pro/AMD64
méthode 1: rien
méthode 2:

$ fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.2.1)

la méthode 3 étant écartée car la 3d n'est toujours pas supportée pour la carte...

quelqu'un saura m'aider pour l'une ou l'autre méthode du wiki ? merci

[edit]
pour info:

$ cat /var/log/Xorg.0.log | grep "(EE)"
(EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV"
(EE) fglrx(0): cannot init AGP

et:

$ cat /var/log/Xorg.0.log | grep "(WW)"
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
(WW) The directory "/usr/share/X11/fonts/CID" does not exist.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID".
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(WW) Ignoring request to load module GLcore
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(WW) fglrx(0): Specified desktop setup not supported: 8
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *

Dernière modification par urss (Le 05/03/2006, à 11:59)

Gou

Re : !wiki ati : méthode 1 marche pas ni la méthode 2 ?

la méthode 3 étant écartée car la 3d n'est toujours pas supportée pour la carte...

moi il me semblait que la méthode 3 était la dernière solution si jamais les autres ne marchaient pas: c'est à dire que si ta carte apparaissait dans la liste de la méthode 3 (que ce soit en indiquant que la 3D était supportée ou seulement la 2D) c'est que les méthodes précédentes ne fonctionnaient pas... mais j'espère pour toi que je me trompe...

Edit: sinon, essaye peut être la dernière version des drivers ATI sortie il y a une ou deux semaines... peut être que ça marche mieux? il y a un post là dessus sur le forum...

Dernière modification par Gou (Le 05/03/2006, à 20:29)

---

"Un clavier azerty en vaut deux..."
Ubuntu Dapper Drake sur un portable Sony Vaio SZ1M/B
mon blog

butnuu74

Re : !wiki ati : méthode 1 marche pas ni la méthode 2 ?

oui j'ai testé avec les tous derniers drivers : ATI Proprietary Linux x86 Display Drivers for XFREE86 / X. Org Version 8.22.5

Stemp

Re : !wiki ati : méthode 1 marche pas ni la méthode 2 ?

Tu pourrais faire un petit locate fglrx.ko ?

Ensuite tu pourrais nous afficher ton fichier /etc/X11/xorg.conf (n'oublie pas les balises code)

---

«La violence n'a jamais rien réglé» Gengis Khan 1162-1227
Blog | Crunchbang Linux | Arch Linux

lcampeur

Re : !wiki ati : méthode 1 marche pas ni la méthode 2 ?

Bonsoir, j'ai a peu pres le même probleme, au niveau de

$ fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.2.1)

Quand je tape les commandes :

cat /var/log/Xorg.0.log | grep "(EE)"

et

cat /var/log/Xorg.0.log | grep "(WW)"

je n'ai aucun messages d'erreur, juste un

>

en début de ligne, qui part en faisant ctrl+c...

J'ai fait la commande que tu a ecris :

$ locate fglrx.ko
/lib/modules/fglrx/build_mod/2.6.x/fglrx.ko
/lib/modules/fglrx/build_mod/2.6.x/.fglrx.ko.cmd
/lib/modules/fglrx/build_mod/fglrx.ko
/lib/modules/fglrx/fglrx.ko
/lib/modules/2.6.12-10-386/kernel/drivers/char/drm/fglrx.ko

Et le fichier xorg.conf :

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig Screen 0" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
EndSection

Section "Files"

        # paths to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/CID"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
	Load  "GLcore"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "fr"
	Option	    "XkbVariant" "latin9"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ImPS/2"
	Option	    "Emulate3Buttons" "true"
	Option	    "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
	Identifier   "BENQ FP567s"
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig Monitor 0"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. Radeon 9600 (R300 AP)"
	Driver      "ati"
	Option	    "UseFBDev" "true"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "ATI Graphics Adapter 0"
	Driver      "fglrx"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. Radeon 9600 (R300 AP)"
	Monitor    "BENQ FP567s"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig Screen 0"
	Device     "ATI Graphics Adapter 0"
	Monitor    "aticonfig Monitor 0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

Au niveau de

Section "Device"
	Identifier  "ATI Graphics Adapter 0"
	Driver      "fglrx"
	BusID       "PCI:1:0:0"

Il est ecrit PCI alors que ma carte est en AGP, je me demande si ça pourrait venir de là...

butnuu74

Re : !wiki ati : méthode 1 marche pas ni la méthode 2 ?

salut Stemp

$ sudo locate fglrx.ko
/lib/modules/2.6.12-10-386/misc/fglrx.ko

et le xorg.conf (j'ai tenté la méthode de Valere depuis):

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig Screen 0" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
EndSection

Section "Files"

        # paths to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/CID"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
	Load  "GLcore"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"/etc/X11/xorg.conf
	Option	    "XkbLayout" "fr"
	Option	    "XkbVariant" "latin9"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ImPS/2"
	Option	    "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
	Identifier   "NUB1107U"
	HorizSync    30.0 - 107.0
	VertRefresh  50.0 - 85.0
	ModeLine     "1280x800@60" 83.9 1280 1312 1624 1656 800 816 824 841
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig Monitor 0"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. Radeon 9500 Pro (R300 NE)"
	Driver      "ati"
	Option	    "UseFBDev" "true"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "ATI Graphics Adapter 0"
	Driver      "fglrx"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. Radeon 9500 Pro (R300 NE)"
	Monitor    "NUB1107U"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1600x1200" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1600x1200" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1600x1200" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1600x1200" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1600x1200" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1600x1200" "1440x900" "1400x1050" "1280x1024" "1280x960" "1280x854" "1280x800" "1280x768" "1200x800" "1152x864" "1152x768" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig Screen 0"
	Device     "ATI Graphics Adapter 0"
	Monitor    "aticonfig Monitor 0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection

@lcampeur: squatteur de topic!

Dernière modification par urss (Le 06/03/2006, à 11:49)