Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 13/02/2020, à 13:19

MonsieurB2

[Résolu] Nouveau membre / MonsieurB2

Bonjour,

Je suis Monsieur B, un nouveau membre, j'aimerai essayer Linux et notamment Ubuntu pour débuter.
J'ai eu plusieurs échecs d'essai sur VM box et VMware... je n'ai toujours pas pu utiliser linux. Je ne veux pas tout modifier sur mon ordinateur de bureau récent, mais j'ai mon ancien ordinateur portable (Packard Bell easynote le69kb) que je viens de remettre à la configuration sortie d'usine, sous windows 8, et j'aimerais de l'assistance. Je n'ai malheureusement pas de parrain linux dans mon secteur.

1ère question :
J'ai vu que les packard bell étaient souvent tatoués, comment faire pour pouvoir restaurer un système fonctionnel si je fais une erreur ? Je ne comprend pas les différences entre image système et clé de récupération... Que dois-je faire pour être en sécurité pour faire des modifications sur mon matériel ?

2eme question :
J'aimerai que windows ne soit pas forcément écrasé, et donc avoir un choix multiboot au démarrage. Dois je télécharger un logiciel pour ca ?

Info qui peut aider, j'ai trouvé que windows est actuellement installé en mode uefi. Je sais pas vraiment ce que ça veut dire, mais j'ai vu que c'était important.

Merci à ceux qui répondront présents à ma demande
Amicalement

B.

Dernière modification par MonsieurB2 (Le 18/02/2020, à 23:09)

Hors ligne

#2 Le 13/02/2020, à 14:10

lucmars

Re : [Résolu] Nouveau membre / MonsieurB2

Mis à part ton Packard, ce site https://libreaquimperle.blogspot.com/p/ … nfant.html te guidera pour réaliser ton dual-boot en uefi


Gaulois Matter !

Hors ligne

#3 Le 13/02/2020, à 14:21

MichA6A10

Re : [Résolu] Nouveau membre / MonsieurB2

Bonjour Monsieur B2 et bienvenue !

Pour répondre à vos questions :

1- PC windows tatoué: je ne pense pas que cela puisse vous géner pour tester Ubuntu sur votre machine (à confirmer)

2- Dans un premier temps, vous pouvez effectivement mettre un dual-boot sur votre windows en installant une VM, ça s'appelle wubi, vous pouvez le télécharger depuis un site comme cnet.com :

https://download.cnet.com/Wubi/3000-209 … 01841.html

Même si ca ne prend pas beaucoup de temps, moi je ne vous le recommande pas. Ce que je vous conseille, c'est de tester une version de Ubuntu en "live". Il vous faudra vous munir d'une clé usb que vous allez rendre bootable . Un clé de 2 ou 4 Go fera l'affaire. C'est une manipulation qui n'est pas très compliquée à réaliser, et qui a l'avantage de vous faire pratiquer Ubuntu sans rien installer, mais de vous préparer à l'installation, puisque vous pourrez effectivement l'installer si cet OS vous convient. Pour rendre votre clé usb bootable (cad démarrer sur la clé au boot de votre PC, à la place de démarrer sur votre windows), vous pouvez installer le petit utilitaire "unetbootin" (https://www.01net.com/telecharger/windo … 48948.html) sur votre machine, pour vous y aider.

Enfin, si je peux me permettre, la partition de windows sur votre PC est sans doute au format uefi, ne touchez pas à cela, c'est le système de partitions de votre DD sur lequel est installé windows, ne vous aventurez pas là-dedans pour le moment.

Tenez-nous au courant !

MichelA6A10

Hors ligne

#4 Le 13/02/2020, à 16:31

malbo

Re : [Résolu] Nouveau membre / MonsieurB2

@MichA6A10 : Wubi est abandonné par Canonical depuis des années (voir "Ubuntu downloader for Windows discontinued"). Pour tenter d'enfoncer le clou, je viens de modifier la doc Wubi du Wiki ubuntu-fr pour mentionner "OBSOLÈTE" dans le titre. J'espère que ça se verra mieux...

Hors ligne

#5 Le 13/02/2020, à 16:54

Nuliel

Re : [Résolu] Nouveau membre / MonsieurB2

Bonjour,
Le tatouage des pc a été interdit depuis pas mal de temps, tu ne trouveras pas de tatouage sur ce pc t'inquiète.

Hors ligne

#6 Le 13/02/2020, à 17:30

lool_lauris

Re : [Résolu] Nouveau membre / MonsieurB2

Salut,

Ce que tu peux faire en tout 1er lieu est de tester Ubuntu et/ou ses variantes en live session (rien n'est installé). Pour cela, il te faut disposer d'une clé bootable.
Outil de création de clé bootable sous windows => https://rufus.ie/fr_FR.html
Images iso Ubuntu => http://cdimage.ubuntu.com/

Dernière modification par lool_lauris (Le 13/02/2020, à 17:31)


Soutenez le Libre => http://www.april.org/

Hors ligne

#7 Le 13/02/2020, à 17:31

MonsieurB2

Re : [Résolu] Nouveau membre / MonsieurB2

Merci à tous pour votre réactivité ! Je vais tenter tout ça, je vous tiens au courant.

B.

Hors ligne

#8 Le 13/02/2020, à 20:03

MonsieurB2

Re : [Résolu] Nouveau membre / MonsieurB2

lucmars a écrit :

Mis à part ton Packard, ce site https://libreaquimperle.blogspot.com/p/ … nfant.html te guidera pour réaliser ton dual-boot en uefi

Alors j'ai suivi le tutoriel de ce site, merci encore pour la réponse, mais au moment de redémarrer avec efi usb device, la clef USB n'est pas reconnue...
J'ai ce message d'erreur bleu sur fond noir "System doesn't have any USB boot option. Please select other boot option in boot manager menu"

ensuite j'appuie sur ok et c'est windows qui démarre...

Avez vous des idées pour m'éclairer ?

Merci à tous

B.

Hors ligne

#9 Le 13/02/2020, à 21:06

lucmars

Re : [Résolu] Nouveau membre / MonsieurB2

MonsieurB2 a écrit :
lucmars a écrit :

Mis à part ton Packard, ce site https://libreaquimperle.blogspot.com/p/ … nfant.html te guidera pour réaliser ton dual-boot en uefi

Alors j'ai suivi le tutoriel de ce site, merci encore pour la réponse, mais au moment de redémarrer avec efi usb device, la clef USB n'est pas reconnue...
J'ai ce message d'erreur bleu sur fond noir "System doesn't have any USB boot option. Please select other boot option in boot manager menu"

ensuite j'appuie sur ok et c'est windows qui démarre...

Avez vous des idées pour m'éclairer ?

Merci à tous

B.

Cela signifie que ton packard ne peut booter sur un support usb ! Si t'as un lecteur dvd, grave un dvd. Sinon il y a plop, un prog à graver sur cd/dvd voir sur une disquette afin de faire booter ton pc sur une clef.


Gaulois Matter !

Hors ligne

#10 Le 14/02/2020, à 10:02

malbo

Re : [Résolu] Nouveau membre / MonsieurB2

Bonjour,
Depuis une session Windows, va dans la "gestion des disques" (si tu ne sais pas où ça se trouve, demande sur un forum Windows...) et vérifie que ta clé USB est bien présente (*). Et vérifie que le système de fichiers de cette clé USB est FAT32. Si ce n'est pas le cas pas la peine d'aller plus loin. Mais si c'est bien FAT32, utilise la "gestion des disques" de Windows pour qu'une lettre soit attribuée à cette clé (mais c'est peut-être déjà fait automatiquement par Windows) : c'est nécessaire pour qu'on puisse voir son contenu avec l'explorateur de fichiers de Windows. Après cela, en fouillant dans cette clé avec l'explorateur de fichiers de Windows, tu pourras  trouver un fichier (pas un dossier, un fichier) nommé "README.diskdefines". Tu pourras l'ouvrir (en demandant de l'ouvrir avec le bloc-note) et tu trouveras dans la première ligne le nom du fichier ISO qui a été utilisé pour faire cette clé USB. Tu copies toute cette ligne et tu la colles dans ta réponse : on pourra ainsi savoir de quelle version de Ubuntu il s'agit et aussi si c'est la 32 bits ou la 64 bits)

(*) si tu ne la vois pas, tu la déconnectes quelques secondes et tu la reconnectes : elle devrait apparaitre.

Dernière modification par malbo (Le 14/02/2020, à 10:07)

Hors ligne

#11 Le 14/02/2020, à 18:03

MonsieurB2

Re : [Résolu] Nouveau membre / MonsieurB2

Merci !

J'ai essayé d'échanger de clef USB, et la nouvelle a été reconnue !! (la première clé était vieille...)

Je suis sur la version d'essai de Ubuntu ! petite victoire, je vais maintenant continuer à suivre le protocole d'installation en dual boot.
C'est Ubuntu en 64 bits que j'ai pris

Merci
Je vous tiens au courant de mon installation, même si tout va bien !
A plus tard

B.

Hors ligne

#12 Le 17/02/2020, à 22:08

MonsieurB2

Re : [Résolu] Nouveau membre / MonsieurB2

Installation terminée ! Merci à tous !

B.

Hors ligne

#13 Le 18/02/2020, à 07:38

malbo

Re : [Résolu] Nouveau membre / MonsieurB2

Bonjour,
Je souhaiterais mentionner ta réussite dans la ligne du modèle EasyNote LE69KB de la Liste des portables « Packard Bell ». Pour donner un exemple d'installation réussie, je te prie de faire un Boot-info depuis une session de ton Ubuntu installé et de donner l'URL de ce Boot-info dans ta réponse.

Dernière modification par malbo (Le 18/02/2020, à 07:39)

Hors ligne

#14 Le 18/02/2020, à 22:39

MonsieurB2

Re : [Résolu] Nouveau membre / MonsieurB2

Bonsoir,

Je te fais le Boot-info dès que j'ai pu remettre internet sur mon packard bell. Je suis en cours de dépannage sur ce forum
big_smile

B.

Hors ligne

#15 Le 20/02/2020, à 19:34

MonsieurB2

Re : [Résolu] Nouveau membre / MonsieurB2

Malbo, voici le lien

http://paste.ubuntu.com/p/tTNm6Pky2q/

Merci à tous

B.

Hors ligne

#16 Le 20/02/2020, à 19:44

lucmars

Re : [Résolu] Nouveau membre / MonsieurB2

Boot-info

Boot Info Script 8f991e4 + Boot-Repair extra info      [Boot-Info 25oct2017]


============================= Boot Info Summary: ===============================

 => No boot loader is installed in the MBR of /dev/sda.

sda1: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda2: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 8/2012: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /EFI/ubuntu/grub.cfg /EFI/Boot/bootx64.efi 
                       /EFI/Boot/fbx64.efi /EFI/ubuntu/fwupx64.efi 
                       /EFI/ubuntu/grubx64.efi /EFI/ubuntu/mmx64.efi 
                       /EFI/ubuntu/shimx64.efi 
                       /EFI/Microsoft/Boot/bootmgfw.efi 
                       /EFI/Microsoft/Boot/bootmgr.efi 
                       /EFI/Microsoft/Boot/memtest.efi 
                       /EFI/OEM/Boot/bootmgfw.efi /EFI/OEM/Boot/bootmgr.efi 
                       /EFI/OEM/Boot/memtest.efi

sda3: __________________________________________________________________________

    File system:       
    Boot sector type:  -
    Boot sector info: 
    Mounting failed:   mount: /mnt/BootInfo/sda3: unknown filesystem type ''.

sda4: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        /Windows/System32/winload.exe

sda5: __________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows 8/2012: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sda6: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 18.04.4 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sda7: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  
    Boot files:        

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________
Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1                   1 1,953,525,167 1,953,525,167  ee GPT


GUID Partition Table detected.

Partition  Attrs   Start Sector    End Sector  # of Sectors System
/dev/sda1      R          2,048       821,247       819,200 Windows Recovery Environment (Windows)
/dev/sda2               821,248     1,435,647       614,400 EFI System partition
/dev/sda3             1,435,648     1,697,791       262,144 Microsoft Reserved Partition (Windows)
/dev/sda4             1,697,792   964,540,415   962,842,624 Data partition (Windows/Linux)
/dev/sda5      R  1,917,870,080 1,953,523,711    35,653,632 Windows Recovery Environment (Windows)
/dev/sda6           964,540,416 1,025,979,869    61,439,454 Data partition (Linux)
/dev/sda7         1,025,980,416 1,917,870,079   891,889,664 Data partition (Linux)

Attributes: R=Required, N=No Block IO, B=Legacy BIOS Bootable, +=More bits set

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/loop1                                              squashfs   
/dev/loop2                                              squashfs   
/dev/loop3                                              squashfs   
/dev/loop4                                              squashfs   
/dev/loop5                                              squashfs   
/dev/loop6                                              squashfs   
/dev/loop7                                              squashfs   
/dev/sda1        5AA059AAA0598D7F                       ntfs       Recovery
/dev/sda2        4E5C-054F                              vfat       ESP
/dev/sda3                                                          
/dev/sda4        2EDAD486DAD44C29                       ntfs       Packard Bell
/dev/sda5        62FC5F9DFC5F69F5                       ntfs       Push Button Reset
/dev/sda6        d9610ea7-e455-4b8d-99cd-a5f547e9da14   ext4       
/dev/sda7        9b5dd711-7ad1-46d2-96c5-6fb38d3ef850   ext4       

========================= "ls -l /dev/disk/by-id" output: ======================

total 0
lrwxrwxrwx 1 root root  9 Feb 19 17:01 ata-MATSHITADVD-RAM_UJ8E0_SP00JBE01147 -> ../../sr0
lrwxrwxrwx 1 root root  9 Feb 20 18:28 ata-WDC_WD10JPVX-22JC3T0_WD-WX71A9355550 -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 20 18:29 ata-WDC_WD10JPVX-22JC3T0_WD-WX71A9355550-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Feb 20 18:28 ata-WDC_WD10JPVX-22JC3T0_WD-WX71A9355550-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Feb 20 18:28 ata-WDC_WD10JPVX-22JC3T0_WD-WX71A9355550-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Feb 20 18:29 ata-WDC_WD10JPVX-22JC3T0_WD-WX71A9355550-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Feb 20 18:29 ata-WDC_WD10JPVX-22JC3T0_WD-WX71A9355550-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Feb 20 18:28 ata-WDC_WD10JPVX-22JC3T0_WD-WX71A9355550-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Feb 20 18:28 ata-WDC_WD10JPVX-22JC3T0_WD-WX71A9355550-part7 -> ../../sda7
lrwxrwxrwx 1 root root  9 Feb 20 18:28 wwn-0x50014ee6ae958832 -> ../../sda
lrwxrwxrwx 1 root root 10 Feb 20 18:29 wwn-0x50014ee6ae958832-part1 -> ../../sda1
lrwxrwxrwx 1 root root 10 Feb 20 18:28 wwn-0x50014ee6ae958832-part2 -> ../../sda2
lrwxrwxrwx 1 root root 10 Feb 20 18:28 wwn-0x50014ee6ae958832-part3 -> ../../sda3
lrwxrwxrwx 1 root root 10 Feb 20 18:29 wwn-0x50014ee6ae958832-part4 -> ../../sda4
lrwxrwxrwx 1 root root 10 Feb 20 18:29 wwn-0x50014ee6ae958832-part5 -> ../../sda5
lrwxrwxrwx 1 root root 10 Feb 20 18:28 wwn-0x50014ee6ae958832-part6 -> ../../sda6
lrwxrwxrwx 1 root root 10 Feb 20 18:28 wwn-0x50014ee6ae958832-part7 -> ../../sda7

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sda2        /boot/efi                vfat       (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda6        /                        ext4       (rw,relatime,errors=remount-ro)
/dev/sda7        /home                    ext4       (rw,relatime)


========================== sda2/EFI/ubuntu/grub.cfg: ===========================

--------------------------------------------------------------------------------
search.fs_uuid d9610ea7-e455-4b8d-99cd-a5f547e9da14 root hd0,gpt6 
set prefix=($root)'/boot/grub'
configfile $prefix/grub.cfg
--------------------------------------------------------------------------------

=========================== sda6/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6  d9610ea7-e455-4b8d-99cd-a5f547e9da14
else
  search --no-floppy --fs-uuid --set=root d9610ea7-e455-4b8d-99cd-a5f547e9da14
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=fr_FR
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=10
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 10 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30,0; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
	set gfxpayload="${1}"
	if [ "${1}" = "keep" ]; then
		set vt_handoff=vt.handoff=1
	else
		set vt_handoff=
	fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-d9610ea7-e455-4b8d-99cd-a5f547e9da14' {
	recordfail
	load_video
	gfxmode $linux_gfx_mode
	insmod gzio
	if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
	insmod part_gpt
	insmod ext2
	set root='hd0,gpt6'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6  d9610ea7-e455-4b8d-99cd-a5f547e9da14
	else
	  search --no-floppy --fs-uuid --set=root d9610ea7-e455-4b8d-99cd-a5f547e9da14
	fi
        linux	/boot/vmlinuz-5.3.0-28-generic root=UUID=d9610ea7-e455-4b8d-99cd-a5f547e9da14 ro  quiet splash $vt_handoff
	initrd	/boot/initrd.img-5.3.0-28-generic
}
submenu 'Options avancées pour Ubuntu' $menuentry_id_option 'gnulinux-advanced-d9610ea7-e455-4b8d-99cd-a5f547e9da14' {
	menuentry 'Ubuntu, avec Linux 5.3.0-28-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.0-28-generic-advanced-d9610ea7-e455-4b8d-99cd-a5f547e9da14' {
		recordfail
		load_video
		gfxmode $linux_gfx_mode
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6  d9610ea7-e455-4b8d-99cd-a5f547e9da14
		else
		  search --no-floppy --fs-uuid --set=root d9610ea7-e455-4b8d-99cd-a5f547e9da14
		fi
		echo	'Chargement de Linux 5.3.0-28-generic…'
	        linux	/boot/vmlinuz-5.3.0-28-generic root=UUID=d9610ea7-e455-4b8d-99cd-a5f547e9da14 ro  quiet splash $vt_handoff
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.3.0-28-generic
	}
	menuentry 'Ubuntu, with Linux 5.3.0-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-5.3.0-28-generic-recovery-d9610ea7-e455-4b8d-99cd-a5f547e9da14' {
		recordfail
		load_video
		insmod gzio
		if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
		insmod part_gpt
		insmod ext2
		set root='hd0,gpt6'
		if [ x$feature_platform_search_hint = xy ]; then
		  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt6 --hint-efi=hd0,gpt6 --hint-baremetal=ahci0,gpt6  d9610ea7-e455-4b8d-99cd-a5f547e9da14
		else
		  search --no-floppy --fs-uuid --set=root d9610ea7-e455-4b8d-99cd-a5f547e9da14
		fi
		echo	'Chargement de Linux 5.3.0-28-generic…'
	        linux	/boot/vmlinuz-5.3.0-28-generic root=UUID=d9610ea7-e455-4b8d-99cd-a5f547e9da14 ro recovery nomodeset 
		echo	'Chargement du disque mémoire initial…'
		initrd	/boot/initrd.img-5.3.0-28-generic
	}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Boot Manager (sur /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-efi-4E5C-054F' {
	insmod part_gpt
	insmod fat
	set root='hd0,gpt2'
	if [ x$feature_platform_search_hint = xy ]; then
	  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  4E5C-054F
	else
	  search --no-floppy --fs-uuid --set=root 4E5C-054F
	fi
	chainloader /EFI/Microsoft/Boot/bootmgfw.efi
}
set timeout_style=menu
if [ "${timeout}" = 0 ]; then
  set timeout=10
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
	fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda6/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda6 during installation
UUID=d9610ea7-e455-4b8d-99cd-a5f547e9da14 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda2 during installation
UUID=4E5C-054F  /boot/efi       vfat    umask=0077      0       1
# /home was on /dev/sda7 during installation
UUID=9b5dd711-7ad1-46d2-96c5-6fb38d3ef850 /home           ext4    defaults        0       2
/swapfile                                 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda6: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

 474.244525909 = 509.216182272  boot/grub/grub.cfg                             1
 463.381832123 = 497.552453632  boot/vmlinuz-5.3.0-28-generic                  2
 463.381832123 = 497.552453632  vmlinuz                                        2
 463.686000824 = 497.879052288  boot/initrd.img-5.3.0-28-generic               3
 463.686000824 = 497.879052288  initrd.img                                     3
 463.686000824 = 497.879052288  initrd.img.old                                 3


ADDITIONAL INFORMATION :
=================== log of boot-info 20200220_1827 ===================
boot-info version : 4ppa66
boot-sav version : 4ppa66
boot-sav-extra version : 4ppa66
glade2script version : 3.2.3~ppa4
boot-info is executed in installed-session (Ubuntu 18.04.4 LTS, bionic, Ubuntu, x86_64)
CPU op-mode(s):      32-bit, 64-bit
BOOT_IMAGE=/boot/vmlinuz-5.3.0-28-generic root=UUID=d9610ea7-e455-4b8d-99cd-a5f547e9da14 ro quiet splash vt.handoff=1

=================== os-prober:
/dev/sda6:L'OS actuellement utilisé - Ubuntu 18.04.4 LTS CurrentSession:linux
/dev/sda2@/EFI/Microsoft/Boot/bootmgfw.efi:Windows Boot Manager:Windows:efi

=================== blkid:
/dev/loop0: TYPE="squashfs"
/dev/loop1: TYPE="squashfs"
/dev/loop2: TYPE="squashfs"
/dev/loop3: TYPE="squashfs"
/dev/loop4: TYPE="squashfs"
/dev/loop5: TYPE="squashfs"
/dev/loop6: TYPE="squashfs"
/dev/loop7: TYPE="squashfs"
/dev/sda1: LABEL="Recovery" UUID="5AA059AAA0598D7F" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="1a070a35-e8b9-4fc1-8851-50c18e4da86a"
/dev/sda2: LABEL="ESP" UUID="4E5C-054F" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="bb2b7d4b-400a-49b8-9334-a5756e223ebb"
/dev/sda4: LABEL="Packard Bell" UUID="2EDAD486DAD44C29" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="e5c22db8-6e5a-49e4-ad50-3f612bd1cf9e"
/dev/sda5: LABEL="Push Button Reset" UUID="62FC5F9DFC5F69F5" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="2b5cd64e-97ff-4c0d-ac0b-ae600cd3721d"
/dev/sda6: UUID="d9610ea7-e455-4b8d-99cd-a5f547e9da14" TYPE="ext4" PARTUUID="3067edd6-5d1f-4679-b95e-0dc2eb320024"
/dev/sda7: UUID="9b5dd711-7ad1-46d2-96c5-6fb38d3ef850" TYPE="ext4" PARTUUID="16c1f28c-b989-48c7-a750-229abe17d5d1"
/dev/sda3: PARTLABEL="Microsoft reserved partition" PARTUUID="f761df64-f6ca-4e8c-8585-73cbf48cadb3"


1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS.

Windows not detected by os-prober on sda4.

=================== /etc/grub.d/ :
drwxr-xr-x  2 root root    4096 févr.  3 19:25 grub.d
total 80
-rwxr-xr-x 1 root root 10046 nov.  11 06:52 00_header
-rwxr-xr-x 1 root root  6258 mars  18  2019 05_debian_theme
-rwxr-xr-x 1 root root 12693 nov.  11 06:52 10_linux
-rwxr-xr-x 1 root root 11298 nov.  11 06:52 20_linux_xen
-rwxr-xr-x 1 root root  1992 janv. 28  2016 20_memtest86+
-rwxr-xr-x 1 root root 12059 nov.  11 06:52 30_os-prober
-rwxr-xr-x 1 root root  1418 nov.  11 06:52 30_uefi-firmware
-rwxr-xr-x 1 root root   214 nov.  11 06:52 40_custom
-rwxr-xr-x 1 root root   216 nov.  11 06:52 41_custom
-rw-r--r-- 1 root root   483 nov.  11 06:52 README




=================== /etc/default/grub :

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"



/boot/efi detected in the fstab of sda6: UUID=4E5C-054F   (sda2)
Presence of EFI/Microsoft file detected: /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/bootx64.efi
Presence of EFI/Boot file detected: /boot/efi/EFI/Boot/fbx64.efi
/usr/share/boot-sav/bs-cmd_terminal.sh: ligne 179: avertissement : substitution de commande: octet nul ignoré en entrée

=================== efibootmgr -v
BootCurrent: 0002
Timeout: 0 seconds
BootOrder: 0001,0002,0003,2001,2002,2003
Boot0001* Windows Boot Manager	HD(2,GPT,bb2b7d4b-400a-49b8-9334-a5756e223ebb,0xc8800,0x96000)/File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0002* ubuntu	HD(2,GPT,bb2b7d4b-400a-49b8-9334-a5756e223ebb,0xc8800,0x96000)/File(EFIubuntushimx64.efi)
Boot0003* HDD0: 	HD(2,GPT,bb2b7d4b-400a-49b8-9334-a5756e223ebb,0xc8800,0x96000)/File(EFIubuntugrubx64.efi)RC
Boot2001* EFI USB Device	RC
Boot2002* EFI DVD/CDROM	RC
Boot2003* EFI Network	RC

=================== UEFI/Legacy mode:
BIOS is EFI-compatible, and is setup in EFI-mode for this installed-session.
SecureBoot disabled. (maybe sec-boot, Veuillez indiquer ce message à boot.repair@gmail.com)


=================== PARTITIONS & DISKS:
sda6	: sda,	not-sepboot,	grubenv-ok	grub2,	signed grub-pc grub-efi ,	update-grub,	64,	with-boot,	is-os,	not--efi--part,	fstab-without-boot,	fstab-has-goodEFI,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	apt-get,	grub-install,	with--usr,	fstab-without-usr,	not-sep-usr,	standard,	farbios,	notbiosboot, .
sda1	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /mnt/boot-sav/sda1.
sda2	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	is-correct-EFI,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	not-far,	notbiosboot, /boot/efi.
sda4	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	is-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	haswinload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda4.
sda5	: sda,	not-sepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	recovery-or-hidden,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /mnt/boot-sav/sda5.
sda7	: sda,	maybesepboot,	no-grubenv	nogrub,	no-docgrub,	no-update-grub,	32,	no-boot,	no-os,	not--efi--part,	part-has-no-fstab,	part-has-no-fstab,	no-nt,	no-winload,	no-recov-nor-hid,	no-bmgr,	notwinboot,	nopakmgr,	nogrubinstall,	no---usr,	part-has-no-fstab,	not-sep-usr,	standard,	farbios,	notbiosboot, /home.

sda	: GPT,	no-BIOS_boot,	has-correctEFI, 	not-usb,	not-mmc, has-os,	2048 sectors * 512 bytes


=================== parted -lm:

BYT;
/dev/sda:1000GB:scsi:512:4096:gpt:ATA WDC WD10JPVX-22J:;
1:1049kB:420MB:419MB:ntfs:Basic data partition:hidden, diag;
2:420MB:735MB:315MB:fat32:EFI system partition:boot, esp;
3:735MB:869MB:134MB::Microsoft reserved partition:msftres;
4:869MB:494GB:493GB:ntfs:Basic data partition:msftdata;
6:494GB:525GB:31.5GB:ext4::;
7:525GB:982GB:457GB:ext4::;
5:982GB:1000GB:18.3GB:ntfs:Basic data partition:hidden, diag;

=================== lsblk:
KNAME TYPE FSTYPE     SIZE LABEL
loop0 loop squashfs   4,2M
loop1 loop squashfs 160,2M
loop2 loop squashfs  89,1M
loop3 loop squashfs   956K
loop4 loop squashfs  54,7M
loop5 loop squashfs  14,8M
loop6 loop squashfs   3,7M
loop7 loop squashfs  44,9M
sda   disk          931,5G
sda1  part ntfs       400M Recovery
sda2  part vfat       300M ESP
sda3  part            128M
sda4  part ntfs     459,1G Packard Bell
sda5  part ntfs        17G Push Button Reset
sda6  part ext4      29,3G
sda7  part ext4     425,3G
sr0   rom            1024M

KNAME ROTA RO RM STATE   MOUNTPOINT
loop0    1  1  0         /snap/gnome-calculator/544
loop1    1  1  0         /snap/gnome-3-28-1804/116
loop2    1  1  0         /snap/core/8268
loop3    1  1  0         /snap/gnome-logs/81
loop4    1  1  0         /snap/core18/1668
loop5    1  1  0         /snap/gnome-characters/399
loop6    1  1  0         /snap/gnome-system-monitor/127
loop7    1  1  0         /snap/gtk-common-themes/1440
sda      1  0  0 running
sda1     1  0  0         /mnt/boot-sav/sda1
sda2     1  0  0         /boot/efi
sda3     1  0  0
sda4     1  0  0         /mnt/boot-sav/sda4
sda5     1  0  0         /mnt/boot-sav/sda5
sda6     1  0  0         /
sda7     1  0  0         /home
sr0      1  0  1 running


=================== mount:
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
udev on /dev type devtmpfs (rw,nosuid,relatime,size=2733760k,nr_inodes=683440,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /run type tmpfs (rw,nosuid,noexec,relatime,size=551616k,mode=755)
/dev/sda6 on / type ext4 (rw,relatime,errors=remount-ro)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /run/lock type tmpfs (rw,nosuid,nodev,noexec,relatime,size=5120k)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime,nsdelegate)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
efivarfs on /sys/firmware/efi/efivars type efivarfs (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/hugetlb type cgroup (rw,nosuid,nodev,noexec,relatime,hugetlb)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/rdma type cgroup (rw,nosuid,nodev,noexec,relatime,rdma)
cgroup on /sys/fs/cgroup/memory type cgroup (rw,nosuid,nodev,noexec,relatime,memory)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=24,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=15607)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime,pagesize=2M)
mqueue on /dev/mqueue type mqueue (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/var/lib/snapd/snaps/gnome-calculator_544.snap on /snap/gnome-calculator/544 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-3-28-1804_116.snap on /snap/gnome-3-28-1804/116 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core_8268.snap on /snap/core/8268 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-logs_81.snap on /snap/gnome-logs/81 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/core18_1668.snap on /snap/core18/1668 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-characters_399.snap on /snap/gnome-characters/399 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gnome-system-monitor_127.snap on /snap/gnome-system-monitor/127 type squashfs (ro,nodev,relatime,x-gdu.hide)
/var/lib/snapd/snaps/gtk-common-themes_1440.snap on /snap/gtk-common-themes/1440 type squashfs (ro,nodev,relatime,x-gdu.hide)
/dev/sda7 on /home type ext4 (rw,relatime)
/dev/sda2 on /boot/efi type vfat (rw,relatime,fmask=0077,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
tmpfs on /run/user/121 type tmpfs (rw,nosuid,nodev,relatime,size=551612k,mode=700,uid=121,gid=125)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=551612k,mode=700,uid=1000,gid=1000)
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,relatime,user_id=1000,group_id=1000)
/dev/sda1 on /mnt/boot-sav/sda1 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda4 on /mnt/boot-sav/sda4 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
/dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096)


=================== ls:
/sys/block/sda (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 size slaves stat subsystem trace uevent
/sys/block/sr0 (filtered):  alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range hidden holders inflight integrity mq power queue range removable ro size slaves stat subsystem trace uevent
/dev (filtered):  autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency cuse disk dri drm_dp_aux0 dvd dvdrw ecryptfs fb0 fd full fuse hpet hugepages hwrng i2c-0 i2c-1 i2c-2 i2c-3 i2c-4 i2c-5 i2c-6 i2c-7 i2c-8 initctl input kfd kmsg lightnvm log mapper mcelog media0 mem memory_bandwidth mqueue net network_latency network_throughput null port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout udmabuf uhid uinput urandom userio v4l vfio vga_arbiter vhci vhost-net vhost-vsock video0 video1 zero zfs
ls /dev/mapper:  control

=================== hexdump -n512 -C /dev/sda1
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 08 00 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff 7f 0c 00 00 00 00 00  |................|
00000030  55 85 00 00 00 00 00 00  02 00 00 00 00 00 00 00  |U...............|
00000040  f6 00 00 00 01 00 00 00  7f 8d 59 a0 aa 59 a0 5a  |..........Y..Y.Z|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda2
00000000  eb 58 90 4d 53 44 4f 53  35 2e 30 00 02 08 5e 1b  |.X.MSDOS5.0...^.|
00000010  02 00 00 00 00 f8 00 00  3f 00 ff 00 00 88 0c 00  |........?.......|
00000020  00 60 09 00 51 02 00 00  00 00 00 00 02 00 00 00  |.`..Q...........|
00000030  01 00 06 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
00000040  80 01 29 4f 05 5c 4e 4e  4f 20 4e 41 4d 45 20 20  |..)O.NNO NAME  |
00000050  20 20 46 41 54 33 32 20  20 20 33 c9 8e d1 bc f4  |  FAT32   3.....|
00000060  7b 8e c1 8e d9 bd 00 7c  88 56 40 88 4e 02 8a 56  |{......|.V@.N..V|
00000070  40 b4 41 bb aa 55 cd 13  72 10 81 fb 55 aa 75 0a  |@.A..U..r...U.u.|
00000080  f6 c1 01 74 05 fe 46 02  eb 2d 8a 56 40 b4 08 cd  |...t..F..-.V@...|
00000090  13 73 05 b9 ff ff 8a f1  66 0f b6 c6 40 66 0f b6  |.s......f...@f..|
000000a0  d1 80 e2 3f f7 e2 86 cd  c0 ed 06 41 66 0f b7 c9  |...?.......Af...|
000000b0  66 f7 e1 66 89 46 f8 83  7e 16 00 75 39 83 7e 2a  |f..f.F..~..u9.~*|
000000c0  00 77 33 66 8b 46 1c 66  83 c0 0c bb 00 80 b9 01  |.w3f.F.f........|
000000d0  00 e8 2c 00 e9 a8 03 a1  f8 7d 80 c4 7c 8b f0 ac  |..,......}..|...|
000000e0  84 c0 74 17 3c ff 74 09  b4 0e bb 07 00 cd 10 eb  |..t.<.t.........|
000000f0  ee a1 fa 7d eb e4 a1 7d  80 eb df 98 cd 16 cd 19  |...}...}........|
00000100  66 60 80 7e 02 00 0f 84  20 00 66 6a 00 66 50 06  |f`.~.... .fj.fP.|
00000110  53 66 68 10 00 01 00 b4  42 8a 56 40 8b f4 cd 13  |Sfh.....B.V@....|
00000120  66 58 66 58 66 58 66 58  eb 33 66 3b 46 f8 72 03  |fXfXfXfX.3f;F.r.|
00000130  f9 eb 2a 66 33 d2 66 0f  b7 4e 18 66 f7 f1 fe c2  |..*f3.f..N.f....|
00000140  8a ca 66 8b d0 66 c1 ea  10 f7 76 1a 86 d6 8a 56  |..f..f....v....V|
00000150  40 8a e8 c0 e4 06 0a cc  b8 01 02 cd 13 66 61 0f  |@............fa.|
00000160  82 74 ff 81 c3 00 02 66  40 49 75 94 c3 42 4f 4f  |.t.....f@Iu..BOO|
00000170  54 4d 47 52 20 20 20 20  00 00 00 00 00 00 00 00  |TMGR    ........|
00000180  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 0d 0a 44 69  |..............Di|
000001b0  73 6b 20 65 72 72 6f 72  ff 0d 0a 50 72 65 73 73  |sk error...Press|
000001c0  20 61 6e 79 20 6b 65 79  20 74 6f 20 72 65 73 74  | any key to rest|
000001d0  61 72 74 0d 0a 00 00 00  00 00 00 00 00 00 00 00  |art.............|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 00 00  ac 01 b9 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda4
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 e8 19 00  |........?.......|
00000020  00 00 00 00 80 00 80 00  ff cf 63 39 00 00 00 00  |..........c9....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  29 4c d4 da 86 d4 da 2e  |........)L......|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 45 72 72 65  |............Erre|
00000190  75 72 20 6c 65 63 74 75  72 65 20 64 69 73 71 75  |ur lecture disqu|
000001a0  65 00 0d 0a 42 4f 4f 54  4d 47 52 20 63 6f 6d 70  |e...BOOTMGR comp|
000001b0  72 65 73 73 82 00 0d 0a  43 74 72 6c 2b 41 6c 74  |ress....Ctrl+Alt|
000001c0  2b 53 75 70 70 72 20 70  6f 75 72 20 72 65 64 82  |+Suppr pour red.|
000001d0  6d 61 72 72 65 72 0d 0a  00 73 74 61 72 74 0d 0a  |marrer...start..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a2 01 b6 01 00 00 55 aa  |..............U.|
00000200

=================== hexdump -n512 -C /dev/sda5
00000000  eb 52 90 4e 54 46 53 20  20 20 20 00 02 08 00 00  |.R.NTFS    .....|
00000010  00 00 00 00 00 f8 00 00  3f 00 ff 00 00 60 50 72  |........?....`Pr|
00000020  00 00 00 00 80 00 80 00  ff 07 20 02 00 00 00 00  |.......... .....|
00000030  00 00 0c 00 00 00 00 00  02 00 00 00 00 00 00 00  |................|
00000040  f6 00 00 00 01 00 00 00  f5 69 5f fc 9d 5f fc 62  |.........i_.._.b|
00000050  00 00 00 00 fa 33 c0 8e  d0 bc 00 7c fb 68 c0 07  |.....3.....|.h..|
00000060  1f 1e 68 66 00 cb 88 16  0e 00 66 81 3e 03 00 4e  |..hf......f.>..N|
00000070  54 46 53 75 15 b4 41 bb  aa 55 cd 13 72 0c 81 fb  |TFSu..A..U..r...|
00000080  55 aa 75 06 f7 c1 01 00  75 03 e9 dd 00 1e 83 ec  |U.u.....u.......|
00000090  18 68 1a 00 b4 48 8a 16  0e 00 8b f4 16 1f cd 13  |.h...H..........|
000000a0  9f 83 c4 18 9e 58 1f 72  e1 3b 06 0b 00 75 db a3  |.....X.r.;...u..|
000000b0  0f 00 c1 2e 0f 00 04 1e  5a 33 db b9 00 20 2b c8  |........Z3... +.|
000000c0  66 ff 06 11 00 03 16 0f  00 8e c2 ff 06 16 00 e8  |f...............|
000000d0  4b 00 2b c8 77 ef b8 00  bb cd 1a 66 23 c0 75 2d  |K.+.w......f#.u-|
000000e0  66 81 fb 54 43 50 41 75  24 81 f9 02 01 72 1e 16  |f..TCPAu$....r..|
000000f0  68 07 bb 16 68 52 11 16  68 09 00 66 53 66 53 66  |h...hR..h..fSfSf|
00000100  55 16 16 16 68 b8 01 66  61 0e 07 cd 1a 33 c0 bf  |U...h..fa....3..|
00000110  0a 13 b9 f6 0c fc f3 aa  e9 fe 01 90 90 66 60 1e  |.............f`.|
00000120  06 66 a1 11 00 66 03 06  1c 00 1e 66 68 00 00 00  |.f...f.....fh...|
00000130  00 66 50 06 53 68 01 00  68 10 00 b4 42 8a 16 0e  |.fP.Sh..h...B...|
00000140  00 16 1f 8b f4 cd 13 66  59 5b 5a 66 59 66 59 1f  |.......fY[ZfYfY.|
00000150  0f 82 16 00 66 ff 06 11  00 03 16 0f 00 8e c2 ff  |....f...........|
00000160  0e 16 00 75 bc 07 1f 66  61 c3 a1 f6 01 e8 09 00  |...u...fa.......|
00000170  a1 fa 01 e8 03 00 f4 eb  fd 8b f0 ac 3c 00 74 09  |............<.t.|
00000180  b4 0e bb 07 00 cd 10 eb  f2 c3 0d 0a 41 20 64 69  |............A di|
00000190  73 6b 20 72 65 61 64 20  65 72 72 6f 72 20 6f 63  |sk read error oc|
000001a0  63 75 72 72 65 64 00 0d  0a 42 4f 4f 54 4d 47 52  |curred...BOOTMGR|
000001b0  20 69 73 20 63 6f 6d 70  72 65 73 73 65 64 00 0d  | is compressed..|
000001c0  0a 50 72 65 73 73 20 43  74 72 6c 2b 41 6c 74 2b  |.Press Ctrl+Alt+|
000001d0  44 65 6c 20 74 6f 20 72  65 73 74 61 72 74 0d 0a  |Del to restart..|
000001e0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
000001f0  00 00 00 00 00 00 8a 01  a7 01 bf 01 00 00 55 aa  |..............U.|
00000200

=================== df -Th:

Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  2.7G     0  2.7G   0% /dev
tmpfs          tmpfs     539M  1.9M  537M   1% /run
/dev/sda6      ext4       29G  5.9G   22G  22% /
tmpfs          tmpfs     2.7G   37M  2.6G   2% /dev/shm
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs          tmpfs     2.7G     0  2.7G   0% /sys/fs/cgroup
/dev/loop0     squashfs  4.3M  4.3M     0 100% /snap/gnome-calculator/544
/dev/loop1     squashfs  161M  161M     0 100% /snap/gnome-3-28-1804/116
/dev/loop2     squashfs   90M   90M     0 100% /snap/core/8268
/dev/loop3     squashfs  1.0M  1.0M     0 100% /snap/gnome-logs/81
/dev/loop4     squashfs   55M   55M     0 100% /snap/core18/1668
/dev/loop5     squashfs   15M   15M     0 100% /snap/gnome-characters/399
/dev/loop6     squashfs  3.8M  3.8M     0 100% /snap/gnome-system-monitor/127
/dev/loop7     squashfs   45M   45M     0 100% /snap/gtk-common-themes/1440
/dev/sda7      ext4      418G  128M  397G   1% /home
/dev/sda2      vfat      296M   55M  242M  19% /boot/efi
tmpfs          tmpfs     539M   20K  539M   1% /run/user/121
tmpfs          tmpfs     539M   40K  539M   1% /run/user/1000
/dev/sda1      fuseblk   400M  272M  129M  68% /mnt/boot-sav/sda1
/dev/sda4      fuseblk   460G   31G  429G   7% /mnt/boot-sav/sda4
/dev/sda5      fuseblk    18G   15G  2.2G  88% /mnt/boot-sav/sda5

=================== fdisk -l:
Disk /dev/loop0: 4.2 MiB, 4403200 bytes, 8600 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop1: 160.2 MiB, 167931904 bytes, 327992 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop2: 89.1 MiB, 93417472 bytes, 182456 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop3: 956 KiB, 978944 bytes, 1912 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop4: 54.7 MiB, 57294848 bytes, 111904 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop5: 14.8 MiB, 15462400 bytes, 30200 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop6: 3.7 MiB, 3825664 bytes, 7472 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/loop7: 44.9 MiB, 47063040 bytes, 91920 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 63A1470D-727E-40BF-940B-4F853856B43E

Device          Start        End   Sectors   Size Type
/dev/sda1        2048     821247    819200   400M Windows recovery environment
/dev/sda2      821248    1435647    614400   300M EFI System
/dev/sda3     1435648    1697791    262144   128M Microsoft reserved
/dev/sda4     1697792  964540415 962842624 459.1G Microsoft basic data
/dev/sda5  1917870080 1953523711  35653632    17G Windows recovery environment
/dev/sda6   964540416 1025979869  61439454  29.3G Linux filesystem
/dev/sda7  1025980416 1917870079 891889664 425.3G Linux filesystem

Partition table entries are not in disk order.




=================== Suggested repair
The default repair of the Boot-Repair utility would reinstall the grub-efi-amd64-signed of sda6, using the following options:        sda2/boot/efi,
Additional repair would be performed: unhide-bootmenu-10s   fix-windows-boot use-standard-efi-file


=================== Final advice in case of suggested repair
N'oubliez pas de régler votre BIOS pour qu'il amorce sur le fichier sda2/efi/.../grub*.efi !

Si votre ordinateur redémarre directement sur Windows, essayez de changer l'ordre de démarrage dans votre BIOS.
Si votre BIOS ne permet pas de changer l'ordre de démarrage, changez l'entrée de démarrage par défaut de l'amorceur Windows.
Par exemple, vous pouvez démarrer Windows, puis saisir la commande suivante dans une invite de commande en mode administrateur :
bcdedit /set {bootmgr} path \EFI\...\grub*.efi


=================== User settings
The settings chosen by the user will not act on the boot.

Gaulois Matter !

Hors ligne

#17 Le 20/02/2020, à 20:27

malbo

Re : [Résolu] Nouveau membre / MonsieurB2

Bonjour,
Extrait de ton Boot-info :

=================== efibootmgr -v
BootCurrent: 0002
Timeout: 0 seconds
BootOrder: 0001,0002,0003,2001,2002,2003
Boot0001* Windows Boot Manager	HD(2,GPT,bb2b7d4b-400a-49b8-9334-a5756e223ebb,0xc8800,0x96000)/File(EFIMicrosoftBootbootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0002* ubuntu	HD(2,GPT,bb2b7d4b-400a-49b8-9334-a5756e223ebb,0xc8800,0x96000)/File(EFIubuntushimx64.efi)

La ligne BootOrder indique que l'entrée prioritaire est l'entrée 0001, c'est à dire "Windows Boot Manager". Le démarrage par défaut devrait se faire directement sur Windows 8. Peux-tu confirmer ? Si oui, peux-tu expliquer comment tu parviens à démarrer sur Ubuntu ?

Dernière modification par malbo (Le 20/02/2020, à 20:28)

Hors ligne

#18 Le 20/02/2020, à 23:13

MonsieurB2

Re : [Résolu] Nouveau membre / MonsieurB2

Dès que mon PC s'allume, F12, et ensuite Ubuntu est le deuxième choix.

Effectivement, si je ne fais rien, c'est directement windows qui se lance

Dernière modification par MonsieurB2 (Le 20/02/2020, à 23:14)

Hors ligne

#19 Le 21/02/2020, à 07:41

malbo

Re : [Résolu] Nouveau membre / MonsieurB2

Bonjour,
Je te remercie pour ces infos complémentaires. Je viens de compléter la ligne du modèle EasyNote LE69KB de la Liste des portables « Packard Bell » pour y mentionner ton succès d'installation de Ubuntu 18.04.4 64 bits en dual-boot avec Windows 8.

Hors ligne