#1 Le 27/11/2020, à 09:59
- pascal1909
defauts après installation ubuntu 20.04
bonjour,
je cherche une solution pour réparer défauts sur mon installation. Je n'ai pas de grandes compétences en informatique , ni de sa langue de bois !
je dispose d'un CD version 18.04
problème 1:
mon ordi démarre chaque fois via page boot ? me demandant de passer par la touche F1.
problème 2:
dernièrement, une mise à niveau m'a été proposer vers la version Ubuntu 20.04. J'ai donc envoyer le processus. l'installation s'est faite.J'étais sous Ubuntu 18
je rencontre les dysfonctionnements suivants:
• aucun accès possible aux disques externes
• les barres d'outils LibreOffice en défauts
voici le rapport de boot repair
https://paste.ubuntu.com/p/d2ZgNT7cPj/
merci de vos conseils
Hors ligne
#2 Le 27/11/2020, à 10:28
- malbo
Re : defauts après installation ubuntu 20.04
Bonjour,
Je colle ci-dessous le contenu du rapport :
boot-info-4ppa125 [20201126_1641]
============================== Boot Info Summary ===============================
=> Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for /boot/grub. It also embeds following components:
modules
---------------------------------------------------------------------------
fshelp ext2 part_msdos biosdisk search_fs_uuid
---------------------------------------------------------------------------
config script
---------------------------------------------------------------------------
search.fs_uuid 9a3fd8da-2764-4de8-831c-81a3d9340918 root hd1,msdos1
set prefix=($root)'/boot/grub'
---------------------------------------------------------------------------
=> libparted MBR boot code is installed in the MBR of /dev/sdb.
=> No boot loader is installed in the MBR of /dev/sdc.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files:
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 20.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/default/grub
/boot/grub/i386-pc/core.img
sdc1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows 2000/XP: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
================================ 1 OS detected =================================
OS#1: L'OS actuellement utilisé - Ubuntu 20.04.1 LTS CurrentSession on sdb1
============================ Architecture/Host Info ============================
CPU architecture: 64-bit
BOOT_IMAGE of the installed session in use:
/boot/vmlinuz-5.4.0-54-generic root=UUID=9a3fd8da-2764-4de8-831c-81a3d9340918 ro quiet splash vt.handoff=7
===================================== UEFI =====================================
This installed-session is not in EFI-mode.
============================= Drive/Partition Info =============================
Disks info: ____________________________________________________________________
sdb : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, has-os, 2048 sectors * 512 bytes
sda : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, no-os, 2048 sectors * 512 bytes
sdc : notGPT, no-BIOSboot, has-noESP, not-usb, not-mmc, no-os, 63 sectors * 512 bytes
Partitions info (1/3): _________________________________________________________
sdb1 : is-os, 64, apt-get, grub-pc , grub2, grub-install, grubenv-ok, update-grub, farbios
sda1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
sdc1 : no-os, 32, nopakmgr, no-docgrub, nogrub, nogrubinstall, no-grubenv, noupdategrub, farbios
Partitions info (2/3): _________________________________________________________
sdb1 : isnotESP, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sda1 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
sdc1 : isnotESP, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot
Partitions info (3/3): _________________________________________________________
sdb1 : not-sepboot, with-boot, fstab-without-boot, not-sep-usr, with--usr, fstab-without-usr, std-grub.d, sdb
sda1 : maybesepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sda
sdc1 : not-sepboot, no-boot, part-has-no-fstab, not-sep-usr, no---usr, part-has-no-fstab, std-grub.d, sdc
fdisk -l (filtered): ___________________________________________________________
Disk sda: 232.91 GiB, 250059350016 bytes, 488397168 sectors
Disk identifier: 0xedcd7f54
Boot Start End Sectors Size Id Type
sda1 * 2048 488396799 488394752 232.9G 83 Linux
Disk sdb: 111.81 GiB, 120034123776 bytes, 234441648 sectors
Disk identifier: 0xd897bf48
Boot Start End Sectors Size Id Type
sdb1 2048 234440703 234438656 111.8G 83 Linux
Disk sdc: 465.78 GiB, 500107862016 bytes, 976773168 sectors
Disk identifier: 0xa26b6848
Boot Start End Sectors Size Id Type
sdc1 63 976768064 976768002 465.8G 7 HPFS/NTFS/exFAT
parted -lm (filtered): _________________________________________________________
sda:250GB:scsi:512:512:msdos:ATA ST3250823AS:;
1:1049kB:250GB:250GB:ext4::boot;
sdb:120GB:scsi:512:512:msdos:ATA KINGSTON SV300S3:;
1:1049kB:120GB:120GB:ext4::;
sdc:500GB:scsi:512:512:msdos:ST950032 5AS:;
1:32.3kB:500GB:500GB:ntfs::;
blkid (filtered): ______________________________________________________________
NAME FSTYPE UUID PARTUUID LABEL PARTLABEL
fd0
sda
└─sda1 ext4 f9818ccf-f35b-4c8e-a6f9-e0d6dd1d131a edcd7f54-01
sdb
└─sdb1 ext4 9a3fd8da-2764-4de8-831c-81a3d9340918 d897bf48-01
sdc
└─sdc1 ntfs 16BC8303BC82DD1D a26b6848-01 Iomega_HDD
df (filtered): _________________________________________________________________
Avail Use% Mounted on
sda1 171.2G 20% /mnt/boot-sav/sda1
sdb1 70.3G 31% /
sdc1 312.4G 33% /mnt/boot-sav/sdc1
Mount options: __________________________________________________________________
sda1 rw,relatime
sdb1 rw,relatime,errors=remount-ro
sdc1 rw,relatime,user_id=0,group_id=0,allow_other,blksize=4096
====================== sdb1/boot/grub/grub.cfg (filtered) ======================
Ubuntu 9a3fd8da-2764-4de8-831c-81a3d9340918
Ubuntu, avec Linux 5.4.0-54-generic 9a3fd8da-2764-4de8-831c-81a3d9340918
Ubuntu, avec Linux 5.4.0-53-generic 9a3fd8da-2764-4de8-831c-81a3d9340918
### END /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_uefi-firmware ###
========================== sdb1/etc/fstab (filtered) ===========================
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb1 during installation
UUID=9a3fd8da-2764-4de8-831c-81a3d9340918 / ext4 errors=remount-ro 0 1
/swapfile none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
======================= sdb1/etc/default/grub (filtered) =======================
GRUB_DEFAULT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""
==================== sdb1: Location of files loaded by Grub ====================
GiB - GB File Fragment(s)
4,506088257 = 4,838375424 boot/grub/grub.cfg 1
106,200901031 = 114,032349184 boot/grub/i386-pc/core.img 1
26,871227264 = 28,852760576 boot/vmlinuz 2
27,308727264 = 29,322522624 boot/vmlinuz-5.4.0-53-generic 1
26,871227264 = 28,852760576 boot/vmlinuz-5.4.0-54-generic 2
27,308727264 = 29,322522624 boot/vmlinuz.old 1
26,871227264 = 28,852760576 vmlinuz 2
27,308727264 = 29,322522624 vmlinuz.old 1
52,758491516 = 56,648998912 boot/initrd.img 2
26,097423553 = 28,021895168 boot/initrd.img-5.4.0-53-generic 2
52,758491516 = 56,648998912 boot/initrd.img-5.4.0-54-generic 2
26,097423553 = 28,021895168 boot/initrd.img.old 2
52,758491516 = 56,648998912 initrd.img 2
26,097423553 = 28,021895168 initrd.img.old 2
===================== sdb1: ls -l /etc/grub.d/ (filtered) ======================
-rwxr-xr-x 1 root root 17622 nov. 13 00:15 10_linux
-rwxr-xr-x 1 root root 42359 nov. 13 00:15 10_linux_zfs
-rwxr-xr-x 1 root root 12894 nov. 13 00:15 20_linux_xen
-rwxr-xr-x 1 root root 12059 mars 18 2019 30_os-prober
-rwxr-xr-x 1 root root 1424 nov. 13 00:15 30_uefi-firmware
-rwxr-xr-x 1 root root 214 mars 18 2019 40_custom
-rwxr-xr-x 1 root root 216 mars 18 2019 41_custom
Suggested repair: ______________________________________________________________
The default repair of the Boot-Repair utility would reinstall the grub2 of
sdb1 into the MBRs of all disks (except live-disks and removable disks without OS).
Additional repair would be performed: unhide-bootmenu-10s
Final advice in case of suggested repair: ______________________________________
Please do not forget to make your BIOS boot on sdb (ATA KINGSTON SV300S3) disk!
Pour moi, tout est normal dans ce Boot-info. Mais les problèmes que tu as ne sont pas visibles dans un Boot-info.
D'autre part, la "langue de bois" est peu pratiquée sur ce forum. Par contre, il peut y avoir des termes techniques inconnus par certains novices. On est là pour les expliquer au besoin.
Dernière modification par malbo (Le 27/11/2020, à 10:37)
Hors ligne
#3 Le 07/01/2021, à 21:16
- pascal1909
Re : defauts après installation ubuntu 20.04
Je n'étais pas repassé sur la suite que tu as donné à ma demande et je t'en remercie. C'est l'occasion de te présenter mes souhaits les meilleurs pour 2021: Paix, bonheur, courage..
bon je n'ai pas cloturé ce post...tout semblait etre revenu à la normale mais surprise.Depuis 2 jours impossible d'ouvrir les fichiers libroffice calc..J'ai de nouveau effectuer bootrepair..sans succès.
merci de vos conseils
Hors ligne
#4 Le 16/01/2021, à 08:30
- malbo
Re : defauts après installation ubuntu 20.04
Bonne année également.
Boot-repair sert à réparer le démarrage de Ubuntu mais il ne peut pas réparer le type de problème que tu as mentionné (impossible d'ouvrir les fichiers libroffice calc).
Je te prie de passer la commande suivante dans un terminal et d'en donner le retour complet (*) dans ta réponse :
cat /var/log/apt/history.log
On pourra voir les dernières mises à jour faites automatiquement et j'espère qu'on y trouvera quelque chose en rapport avec ton souci.
(*) définition du "retour complet" : https://forum.ubuntu-fr.org/viewtopic.p … #p22040823
Hors ligne