Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 20/12/2008, à 16:19

Otacon

Problème WIFI, Intrepid, Realtek 8187b

Bonjour à tous,

Je vous écris un petit message pour vous faire part d'un probléme qui persiste depuis ce matin.
En effet, je n'arrive pas à installer le wifi sur mon nouveau portable, avec carte wifi intégré.
J'ai vu qu'il y avait pas mal de prob avec cetype de carte wifi, mais normalement avec la version intrepid de ubuntu ca devrait le faire. Mais ca le fait pas, je sais pas pourquoi, pourriez vous m'aider ?

Par avance merci ! wink

https://help.ubuntu.com/community/WifiDocs/Device/RealtekRTL8187b

Dernière modification par Otacon (Le 20/12/2008, à 17:29)

Hors ligne

#2 Le 20/12/2008, à 16:55

bbggdtdt

Re : Problème WIFI, Intrepid, Realtek 8187b

marion@marion-laptop:~/Bureau/rtl8187b-modified$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)

marion@marion-laptop:~/Bureau/rtl8187b-modified$ dmesg | tail -n 30
[   38.078000] Bluetooth: RFCOMM ver 1.10
[   42.181099] [drm] Initialized drm 1.1.0 20060810
[   42.188648] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   42.188667] pci 0000:00:02.0: setting latency timer to 64
[   42.191464] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   42.276822] r8169: eth0: link up
[   42.276851] r8169: eth0: link up
[   42.484543] NET: Registered protocol family 17
[   43.007010] set status page addr 0x07fff000
[  163.384269] CPU0 attaching NULL sched-domain.
[  163.384286] CPU1 attaching NULL sched-domain.
[  163.386205] CPU0 attaching sched-domain:
[  163.386213]  domain 0: span 0-1 level MC
[  163.386219]   groups: 0 1
[  163.386230] CPU1 attaching sched-domain:
[  163.386235]  domain 0: span 0-1 level MC
[  163.386239]   groups: 1 0
[  177.839226] NET: Registered protocol family 10
[  177.841487] lo: Disabled Privacy Extensions
[  188.752025] eth0: no IPv6 routers present
[  234.704731] type=1503 audit(1229783968.598:5): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5787/net/" pid=5787 profile="/usr/sbin/cupsd"
[  235.761308] type=1503 audit(1229783969.655:6): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5791/net/" pid=5791 profile="/usr/sbin/cupsd"
[  235.761368] type=1503 audit(1229783969.655:7): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=5791 profile="/usr/sbin/cupsd"
[  235.761380] type=1503 audit(1229783969.655:8): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=5791 profile="/usr/sbin/cupsd"
[  235.761392] type=1503 audit(1229783969.655:9): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=5791 profile="/usr/sbin/cupsd"
[  235.761404] type=1503 audit(1229783969.655:10): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=5791 profile="/usr/sbin/cupsd"
[  235.761416] type=1503 audit(1229783969.655:11): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=5791 profile="/usr/sbin/cupsd"
[  235.761427] type=1503 audit(1229783969.655:12): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=5791 profile="/usr/sbin/cupsd"
[  235.761440] type=1503 audit(1229783969.655:13): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=5791 profile="/usr/sbin/cupsd"
[  235.761453] type=1503 audit(1229783969.655:14): operation="socket_create" family="x25" sock_type="seqpacket" protocol=0 pid=5791 profile="/usr/sbin/cupsd"

#3 Le 20/12/2008, à 17:07

bbggdtdt

Re : Problème WIFI, Intrepid, Realtek 8187b

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008 (Ubuntu 2.6.27-7.14-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[    0.000000]  BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000077b6c000 (usable)
[    0.000000]  BIOS-e820: 0000000077b6c000 - 0000000077bbf000 (reserved)
[    0.000000]  BIOS-e820: 0000000077bbf000 - 0000000077c86000 (usable)
[    0.000000]  BIOS-e820: 0000000077c86000 - 0000000077cbf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 0000000077cbf000 - 0000000077cee000 (usable)
[    0.000000]  BIOS-e820: 0000000077cee000 - 0000000077cff000 (ACPI data)
[    0.000000]  BIOS-e820: 0000000077cff000 - 0000000077d00000 (usable)
[    0.000000]  BIOS-e820: 0000000077d00000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] last_pfn = 0x77d00 max_arch_pfn = 0x100000
[    0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
[    0.000000] RAMDISK: 37822000 - 37feff88
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP 000FE020, 0024 (r2 TOSINV)
[    0.000000] ACPI: XSDT 77CFE120, 0064 (r1 TOSINV TOSINV00        1       1000013)
[    0.000000] ACPI: FACP 77CFD000, 00F4 (r4 TOSINV TOSINV00        1 MSFT  1000013)
[    0.000000] ACPI: DSDT 77CF1000, 763F (r1 TOSINV TOSINV00        1 MSFT  1000013)
[    0.000000] ACPI: FACS 77C93000, 0040
[    0.000000] ACPI: HPET 77CFC000, 0038 (r1 TOSINV TOSINV00        1 MSFT  1000013)
[    0.000000] ACPI: APIC 77CFB000, 006C (r2 TOSINV TOSINV00        1 MSFT  1000013)
[    0.000000] ACPI: MCFG 77CFA000, 003C (r1 TOSINV TOSINV00        1 MSFT  1000013)
[    0.000000] ACPI: ASF! 77CF9000, 00A5 (r32 TOSINV TOSINV00        1 MSFT  1000013)
[    0.000000] ACPI: SLIC 77CF0000, 0176 (r1 TOSINV TOSINV00        1 MSFT  1000013)
[    0.000000] ACPI: BOOT 77CEF000, 0028 (r1 TOSINV TOSINV00        1 MSFT  1000013)
[    0.000000] ACPI: SSDT 77CEE000, 0655 (r1  PmRef    CpuPm     3000 INTL 20051117)
[    0.000000] ACPI: DMI detected: Toshiba
[    0.000000] 1021MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 38000000
[    0.000000]   low ram: 00000000 - 38000000
[    0.000000]   bootmap 00008000 - 0000f000
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00005c0a20]    TEXT DATA BSS ==> [0000100000 - 00005c0a20]
[    0.000000]   #4 [0037822000 - 0037feff88]          RAMDISK ==> [0037822000 - 0037feff88]
[    0.000000]   #5 [00005c1000 - 00005c4000]    INIT_PG_TABLE ==> [00005c1000 - 00005c4000]
[    0.000000]   #6 [000009e000 - 0000100000]    BIOS reserved ==> [000009e000 - 0000100000]
[    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x00038000
[    0.000000]   HighMem  0x00038000 -> 0x00077d00
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x00077b6c
[    0.000000]     0: 0x00077bbf -> 0x00077c86
[    0.000000]     0: 0x00077cbf -> 0x00077cee
[    0.000000]     0: 0x00077cff -> 0x00077d00
[    0.000000] On node 0 totalpages: 490497
[    0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000
[    0.000000]   DMA zone: 3962 pages, LIFO batch:0
[    0.000000]   Normal zone: 223300 pages, LIFO batch:31
[    0.000000]   HighMem zone: 258921 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:78000000)
[    0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 486183
[    0.000000] Kernel command line: root=UUID=d42532a4-1f35-414d-a8cb-cd2c00540788 ro quiet splash
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] TSC: PIT calibration confirmed by PMTIMER.
[    0.000000] TSC: using PIT calibration value
[    0.000000] Detected 1995.203 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] Memory: 1930032k/1963008k available (2572k kernel code, 31176k reserved, 1160k data, 424k init, 1044876k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.004000]     vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    0.004000]       .init : 0xc04ab000 - 0xc0515000   ( 424 kB)
[    0.004000]       .data : 0xc038329a - 0xc04a5680   (1160 kB)
[    0.004000]       .text : 0xc0100000 - 0xc038329a   (2572 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.004000] hpet clockevent registered
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.40 BogoMIPS (lpj=7980812)
[    0.004000] Security Framework initialized
[    0.004000] SELinux:  Disabled at boot.
[    0.004000] AppArmor: AppArmor initialized
[    0.004000] Mount-cache hash table entries: 512
[    0.004000] Initializing cgroup subsys ns
[    0.004000] Initializing cgroup subsys cpuacct
[    0.004000] Initializing cgroup subsys memory
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 1024K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 0
[    0.004000] using mwait in idle threads.
[    0.004000] Checking 'hlt' instruction... OK.
[    0.017858] ACPI: Core revision 20080609
[    0.020622] ACPI: Checking initramfs for custom DSDT
[    0.360258] ENABLING IO-APIC IRQs
[    0.360444] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.401606] CPU0: Intel(R) Pentium(R) Dual  CPU  T3200  @ 2.00GHz stepping 0d
[    0.404025] Booting processor 1/1 ip 6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 3990.39 BogoMIPS (lpj=7980782)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 1024K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.488401] CPU1: Intel(R) Pentium(R) Dual  CPU  T3200  @ 2.00GHz stepping 0d
[    0.488418] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.492053] Brought up 2 CPUs
[    0.492056] Total of 2 processors activated (7980.79 BogoMIPS).
[    0.492078] CPU0 attaching sched-domain:
[    0.492081]  domain 0: span 0-1 level MC
[    0.492083]   groups: 0 1
[    0.492089] CPU1 attaching sched-domain:
[    0.492092]  domain 0: span 0-1 level MC
[    0.492094]   groups: 1 0
[    0.492174] net_namespace: 840 bytes
[    0.492174] Booting paravirtualized kernel on bare hardware
[    0.492289] Time: 14:35:34  Date: 12/20/08
[    0.492317] NET: Registered protocol family 16
[    0.492337] EISA bus registered
[    0.492337] ACPI: bus type pci registered
[    0.492337] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[    0.492337] PCI: MCFG area at f8000000 reserved in E820
[    0.492337] PCI: Using MMCONFIG for extended config space
[    0.492337] PCI: Using configuration type 1 for base access
[    0.493658] ACPI: EC: Look up EC in DSDT
[    0.500531] ACPI: BIOS _OSI(Linux) query ignored via DMI
[    0.501463] ACPI: Interpreter enabled
[    0.501466] ACPI: (supports S0 S3 S4 S5)
[    0.501490] ACPI: Using IOAPIC for interrupt routing
[    0.501574] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.556048] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.668714] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.668714] ACPI: EC: driver started in interrupt mode
[    0.668714] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.668714] PCI: 0000:00:02.0 reg 10 64bit mmio: [90000000, 903fffff]
[    0.668714] PCI: 0000:00:02.0 reg 18 32bit mmio: [80000000, 8fffffff]
[    0.668714] PCI: 0000:00:02.0 reg 20 io port: [4110, 4117]
[    0.668714] PCI: 0000:00:02.1 reg 10 64bit mmio: [92500000, 925fffff]
[    0.668714] PCI: 0000:00:1a.0 reg 20 io port: [40e0, 40ff]
[    0.668714] PCI: 0000:00:1a.1 reg 20 io port: [40c0, 40df]
[    0.668714] PCI: 0000:00:1a.7 reg 10 32bit mmio: [94605c00, 94605fff]
[    0.668714] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.668714] pci 0000:00:1a.7: PME# disabled
[    0.668714] PCI: 0000:00:1b.0 reg 10 64bit mmio: [94600000, 94603fff]
[    0.668714] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.668714] pci 0000:00:1b.0: PME# disabled
[    0.668778] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.668783] pci 0000:00:1c.0: PME# disabled
[    0.668859] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.668864] pci 0000:00:1c.4: PME# disabled
[    0.668947] PCI: 0000:00:1d.0 reg 20 io port: [40a0, 40bf]
[    0.669066] PCI: 0000:00:1d.1 reg 20 io port: [4080, 409f]
[    0.669180] PCI: 0000:00:1d.2 reg 20 io port: [4060, 407f]
[    0.669299] PCI: 0000:00:1d.3 reg 20 io port: [4040, 405f]
[    0.669399] PCI: 0000:00:1d.7 reg 10 32bit mmio: [94605800, 94605bff]
[    0.669463] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.669469] pci 0000:00:1d.7: PME# disabled
[    0.669677] PCI: 0000:00:1f.2 reg 10 io port: [4108, 410f]
[    0.669685] PCI: 0000:00:1f.2 reg 14 io port: [411c, 411f]
[    0.669693] PCI: 0000:00:1f.2 reg 18 io port: [4100, 4107]
[    0.669701] PCI: 0000:00:1f.2 reg 1c io port: [4118, 411b]
[    0.669709] PCI: 0000:00:1f.2 reg 20 io port: [4020, 403f]
[    0.669716] PCI: 0000:00:1f.2 reg 24 32bit mmio: [94605000, 946057ff]
[    0.669751] pci 0000:00:1f.2: PME# supported from D3hot
[    0.669756] pci 0000:00:1f.2: PME# disabled
[    0.669782] PCI: 0000:00:1f.3 reg 10 64bit mmio: [94606000, 946060ff]
[    0.669803] PCI: 0000:00:1f.3 reg 20 io port: [4000, 401f]
[    0.669985] PCI: 0000:02:00.0 reg 10 io port: [2000, 20ff]
[    0.670036] PCI: 0000:02:00.0 reg 18 32bit mmio: [90410000, 90410fff]
[    0.670088] PCI: 0000:02:00.0 reg 20 32bit mmio: [90400000, 9040ffff]
[    0.670240] pci 0000:02:00.0: unsupported PM cap regs version (7)
[    0.670334] PCI: bridge 0000:00:1c.0 io port: [2000, 3fff]
[    0.670339] PCI: bridge 0000:00:1c.0 32bit mmio: [93600000, 945fffff]
[    0.670347] PCI: bridge 0000:00:1c.0 64bit mmio pref: [90400000, 914fffff]
[    0.670406] PCI: bridge 0000:00:1c.4 io port: [1000, 1fff]
[    0.670411] PCI: bridge 0000:00:1c.4 32bit mmio: [92600000, 935fffff]
[    0.670419] PCI: bridge 0000:00:1c.4 64bit mmio pref: [91500000, 924fffff]
[    0.670482] pci 0000:00:1e.0: transparent bridge
[    0.670516] bus 00 -> node 0
[    0.670529] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.672479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[    0.672685] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.672911] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[    0.676259] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12)
[    0.676341] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[    0.676516] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.676691] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.676866] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.677042] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[    0.677215] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[    0.677389] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[    0.677496] ACPI: Power Resource [FN00] (on)
[    0.677496] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.677496] pnp: PnP ACPI init
[    0.677496] ACPI: bus type pnp registered
[    0.680787] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.4 BAR 7 (0x1000-0x1fff), disabling
[    0.680787] pnp: PnP ACPI: found 8 devices
[    0.680787] ACPI: ACPI bus type pnp unregistered
[    0.680787] PnPBIOS: Disabled by ACPI PNP
[    0.680787] PCI: Using ACPI for IRQ routing
[    0.688041] NET: Registered protocol family 8
[    0.688044] NET: Registered protocol family 20
[    0.688059] NetLabel: Initializing
[    0.688059] NetLabel:  domain hash size = 128
[    0.688059] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.688066] NetLabel:  unlabeled traffic allowed by default
[    0.688074] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.688080] hpet0: 4 64-bit timers, 14318180 Hz
[    0.690013] tracer: 772 pages allocated for 65536 entries of 48 bytes
[    0.690016]    actual entries 65620
[    0.690127] AppArmor: AppArmor Filesystem Enabled
[    0.690154] ACPI: RTC can wake from S4
[    0.692040] Switched to high resolution mode on CPU 0
[    0.692436] Switched to high resolution mode on CPU 1
[    0.696027] system 00:01: ioport range 0x800-0x80f has been reserved
[    0.696030] system 00:01: ioport range 0x810-0x817 has been reserved
[    0.696033] system 00:01: ioport range 0x820-0x823 has been reserved
[    0.696036] system 00:01: ioport range 0x400-0x47f has been reserved
[    0.696039] system 00:01: ioport range 0x500-0x57f has been reserved
[    0.696042] system 00:01: ioport range 0x580-0x5ff has been reserved
[    0.696045] system 00:01: ioport range 0x600-0x627 has been reserved
[    0.696049] system 00:01: iomem range 0xf8000000-0xfbffffff could not be reserved
[    0.696052] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[    0.696055] system 00:01: iomem range 0xfed10000-0xfed13fff could not be reserved
[    0.696058] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[    0.696062] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[    0.696065] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.696068] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.696071] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[    0.696074] system 00:01: iomem range 0xff800000-0xffffffff could not be reserved
[    0.731213] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.731217] pci 0000:00:1c.0:   IO window: 0x2000-0x3fff
[    0.731224] pci 0000:00:1c.0:   MEM window: 0x93600000-0x945fffff
[    0.731230] pci 0000:00:1c.0:   PREFETCH window: 0x00000090400000-0x000000914fffff
[    0.731238] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06
[    0.731242] pci 0000:00:1c.4:   IO window: 0x1000-0x1fff
[    0.731248] pci 0000:00:1c.4:   MEM window: 0x92600000-0x935fffff
[    0.731254] pci 0000:00:1c.4:   PREFETCH window: 0x00000091500000-0x000000924fffff
[    0.731262] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[    0.731264] pci 0000:00:1e.0:   IO window: disabled
[    0.731271] pci 0000:00:1e.0:   MEM window: disabled
[    0.731276] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.731296] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.731302] pci 0000:00:1c.0: setting latency timer to 64
[    0.731312] pci 0000:00:1c.4: enabling device (0000 -> 0003)
[    0.731316] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.731323] pci 0000:00:1c.4: setting latency timer to 64
[    0.731331] pci 0000:00:1e.0: setting latency timer to 64
[    0.731335] bus: 00 index 0 io port: [0, ffff]
[    0.731337] bus: 00 index 1 mmio: [0, ffffffff]
[    0.731339] bus: 02 index 0 io port: [2000, 3fff]
[    0.731342] bus: 02 index 1 mmio: [93600000, 945fffff]
[    0.731344] bus: 02 index 2 mmio: [90400000, 914fffff]
[    0.731346] bus: 02 index 3 mmio: [0, 0]
[    0.731348] bus: 06 index 0 io port: [1000, 1fff]
[    0.731350] bus: 06 index 1 mmio: [92600000, 935fffff]
[    0.731352] bus: 06 index 2 mmio: [91500000, 924fffff]
[    0.731354] bus: 06 index 3 mmio: [0, 0]
[    0.731356] bus: 03 index 0 mmio: [0, 0]
[    0.731358] bus: 03 index 1 mmio: [0, 0]
[    0.731360] bus: 03 index 2 mmio: [0, 0]
[    0.731361] bus: 03 index 3 io port: [0, ffff]
[    0.731363] bus: 03 index 4 mmio: [0, ffffffff]
[    0.731373] NET: Registered protocol family 2
[    0.744055] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.744311] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.744791] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.745132] TCP: Hash tables configured (established 131072 bind 65536)
[    0.745136] TCP reno registered
[    0.752123] NET: Registered protocol family 1
[    0.752251] checking if image is initramfs... it is
[    1.438659] Freeing initrd memory: 7991k freed
[    1.438862] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    1.438865] Simple Boot Flag at 0x44 set to 0x1
[    1.439829] audit: initializing netlink socket (disabled)
[    1.439854] type=2000 audit(1229783734.436:1): initialized
[    1.445733] highmem bounce pool size: 64 pages
[    1.445740] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.448031] VFS: Disk quotas dquot_6.5.1
[    1.448124] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.448227] msgmni has been set to 1745
[    1.448355] io scheduler noop registered
[    1.448358] io scheduler anticipatory registered
[    1.448361] io scheduler deadline registered
[    1.448374] io scheduler cfq registered (default)
[    1.448389] pci 0000:00:02.0: Boot video device
[    9.448007] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[   17.448007] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[   17.448238] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[   17.448291] pcieport-driver 0000:00:1c.0: found MSI capability
[   17.448345] pci_express 0000:00:1c.0:pcie00: allocate port service
[   17.448386] pci_express 0000:00:1c.0:pcie02: allocate port service
[   17.448423] pci_express 0000:00:1c.0:pcie03: allocate port service
[   17.448546] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[   17.448598] pcieport-driver 0000:00:1c.4: found MSI capability
[   17.448649] pci_express 0000:00:1c.4:pcie00: allocate port service
[   17.448695] pci_express 0000:00:1c.4:pcie02: allocate port service
[   17.448735] pci_express 0000:00:1c.4:pcie03: allocate port service
[   17.449057] isapnp: Scanning for PnP cards...
[   17.802958] isapnp: No Plug & Play device found
[   17.835632] hpet_resources: 0xfed00000 is busy
[   17.835712] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[   17.837932] brd: module loaded
[   17.837999] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   17.838121] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[   17.868567] serio: i8042 KBD port at 0x60,0x64 irq 1
[   17.868573] serio: i8042 AUX port at 0x60,0x64 irq 12
[   17.872117] mice: PS/2 mouse device common for all mice
[   17.872249] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[   17.872281] rtc0: alarms up to one month, hpet irqs
[   17.872407] EISA: Probing bus 0 at eisa.0
[   17.872415] Cannot allocate resource for EISA slot 1
[   17.872417] Cannot allocate resource for EISA slot 2
[   17.872420] Cannot allocate resource for EISA slot 3
[   17.872422] Cannot allocate resource for EISA slot 4
[   17.872442] EISA: Detected 0 cards.
[   17.872445] cpuidle: using governor ladder
[   17.872448] cpuidle: using governor menu
[   17.872971] TCP cubic registered
[   17.872999] Using IPI No-Shortcut mode
[   17.873189] registered taskstats version 1
[   17.873312]   Magic number: 4:55:587
[   17.873352] tty ptyc5: hash matches
[   17.873433] rtc_cmos 00:03: setting system clock to 2008-12-20 14:35:51 UTC (1229783751)
[   17.873437] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   17.873439] EDD information not available.
[   17.873673] Freeing unused kernel memory: 424k freed
[   17.873710] Write protecting the kernel text: 2576k
[   17.873736] Write protecting the kernel read-only data: 936k
[   17.899444] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   18.008033] fuse init (API version 7.9)
[   18.048553] fan PNP0C0B:00: registered as cooling_device0
[   18.048560] ACPI: Fan [FAN] (on)
[   18.064705] ACPI: SSDT 77B77C18, 026B (r1  PmRef  Cpu0Ist     3000 INTL 20051117)
[   18.065281] ACPI: SSDT 77B75598, 0537 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
[   18.065918] Monitor-Mwait will be used to enter C-1 state
[   18.065921] Monitor-Mwait will be used to enter C-2 state
[   18.066086] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   18.066139] processor ACPI0007:00: registered as cooling_device1
[   18.066144] ACPI: Processor [CPU0] (supports 8 throttling states)
[   18.066693] ACPI: SSDT 77B76E18, 01CF (r1  PmRef    ApIst     3000 INTL 20051117)
[   18.067298] ACPI: SSDT 77B77F18, 008D (r1  PmRef    ApCst     3000 INTL 20051117)
[   18.068094] Marking TSC unstable due to TSC halts in idle
[   18.088266] ACPI: CPU1 (power states: C1[C1] C2[C2])
[   18.088347] processor ACPI0007:01: registered as cooling_device2
[   18.088357] ACPI: Processor [CPU1] (supports 8 throttling states)
[   18.091583] thermal LNXTHERM:01: registered as thermal_zone0
[   18.091900] ACPI: Transitioning device [FAN] to D3
[   18.092049] ACPI: Thermal Zone [THRM] (0 C)
[   18.399162] usbcore: registered new interface driver usbfs
[   18.399189] usbcore: registered new interface driver hub
[   18.399439] usbcore: registered new device driver usb
[   18.408162] USB Universal Host Controller Interface driver v3.0
[   18.408212] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   18.408222] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[   18.408226] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   18.408272] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[   18.408311] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040e0
[   18.408452] usb usb1: configuration #1 chosen from 1 choice
[   18.408479] hub 1-0:1.0: USB hub found
[   18.408486] hub 1-0:1.0: 2 ports detected
[   18.454666] No dock devices found.
[   18.477785] SCSI subsystem initialized
[   18.496735] libata version 3.00 loaded.
[   18.616315] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[   18.616326] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[   18.616330] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   18.616357] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[   18.616394] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0
[   18.616493] usb usb2: configuration #1 chosen from 1 choice
[   18.616520] hub 2-0:1.0: USB hub found
[   18.616529] hub 2-0:1.0: 2 ports detected
[   18.724527] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[   18.724547] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[   18.724552] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[   18.724689] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
[   18.728036] usb 1-2: new full speed USB device using uhci_hcd and address 2
[   18.728594] ehci_hcd 0000:00:1a.7: debug port 1
[   18.728602] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[   18.728621] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x94605c00
[   18.856563] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   18.856844] usb usb3: configuration #1 chosen from 1 choice
[   18.856885] hub 3-0:1.0: USB hub found
[   18.856894] hub 3-0:1.0: 4 ports detected
[   19.000055] Clocksource tsc unstable (delta = -124577514 ns)
[   19.064295] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   19.064306] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[   19.064311] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   19.064347] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[   19.064387] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000040a0
[   19.064504] usb usb4: configuration #1 chosen from 1 choice
[   19.064533] hub 4-0:1.0: USB hub found
[   19.064541] hub 4-0:1.0: 2 ports detected
[   19.168564] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   19.168574] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[   19.168578] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   19.168610] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[   19.168641] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
[   19.168751] usb usb5: configuration #1 chosen from 1 choice
[   19.168778] hub 5-0:1.0: USB hub found
[   19.168785] hub 5-0:1.0: 2 ports detected
[   19.260059] usb 1-2: device not accepting address 2, error -71
[   19.272305] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[   19.272314] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[   19.272318] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   19.272345] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[   19.272376] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00004060
[   19.272476] usb usb6: configuration #1 chosen from 1 choice
[   19.272506] hub 6-0:1.0: USB hub found
[   19.272516] hub 6-0:1.0: 2 ports detected
[   19.312101] hub 1-0:1.0: unable to enumerate USB device on port 2
[   19.424082] usb 3-2: new high speed USB device using ehci_hcd and address 2
[   19.480526] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   19.480535] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[   19.480539] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   19.480567] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7
[   19.480604] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004040
[   19.480706] usb usb7: configuration #1 chosen from 1 choice
[   19.480732] hub 7-0:1.0: USB hub found
[   19.480739] hub 7-0:1.0: 2 ports detected
[   19.584416] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   19.584433] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[   19.584438] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   19.584472] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[   19.588372] ehci_hcd 0000:00:1d.7: debug port 1
[   19.588379] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[   19.588386] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x94605800
[   19.595307] usb 3-2: configuration #1 chosen from 1 choice
[   19.604048] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   19.604407] usb usb8: configuration #1 chosen from 1 choice
[   19.604697] hub 8-0:1.0: USB hub found
[   19.604706] hub 8-0:1.0: 8 ports detected
[   19.814660] ahci 0000:00:1f.2: version 3.0
[   19.814684] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[   19.814841] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[   19.814844] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ems
[   19.814850] ahci 0000:00:1f.2: setting latency timer to 64
[   19.815738] scsi0 : ahci
[   19.815871] scsi1 : ahci
[   19.815944] scsi2 : ahci
[   19.816039] scsi3 : ahci
[   19.816113] scsi4 : ahci
[   19.816185] scsi5 : ahci
[   19.816316] ata1: SATA max UDMA/133 abar m2048@0x94605000 port 0x94605100 irq 221
[   19.816320] ata2: SATA max UDMA/133 abar m2048@0x94605000 port 0x94605180 irq 221
[   19.816323] ata3: DUMMY
[   19.816324] ata4: DUMMY
[   19.816327] ata5: SATA max UDMA/133 abar m2048@0x94605000 port 0x94605300 irq 221
[   19.816331] ata6: SATA max UDMA/133 abar m2048@0x94605000 port 0x94605380 irq 221
[   19.924083] usb 8-6: new high speed USB device using ehci_hcd and address 2
[   20.068045] usb 8-6: configuration #1 chosen from 1 choice
[   20.300069] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   20.671642] ata1.00: ATA-8: TOSHIBA MK1652GSX, LV010M, max UDMA/100
[   20.671645] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[   20.672635] ata1.00: configured for UDMA/100
[   21.008076] ata2: SATA link down (SStatus 0 SControl 300)
[   21.344088] ata5: SATA link down (SStatus 0 SControl 300)
[   22.248084] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   22.280643] ata6.00: ATAPI: TSSTcorp CDDVDW TS-L633A, TO01, max UDMA/100, ATAPI AN
[   22.323233] ata6.00: configured for UDMA/100
[   22.340175] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK1652GS LV01 PQ: 0 ANSI: 5
[   22.365671] scsi 5:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633A  TO01 PQ: 0 ANSI: 5
[   22.365782] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   22.365803] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   22.365857] r8169 0000:02:00.0: setting latency timer to 64
[   22.365887] r8169 0000:02:00.0: unknown MAC (37a00000)
[   22.366386] eth0: RTL8169 at 0xf88a6000, 00:1e:33:7f:66:c9, XID 34a00000 IRQ 220
[   22.392874] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[   22.392915] scsi 5:0:0:0: Attached scsi generic sg1 type 5
[   22.417486] Driver 'sr' needs updating - please use bus_type methods
[   22.424405] Driver 'sd' needs updating - please use bus_type methods
[   22.424564] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   22.424587] sd 0:0:0:0: [sda] Write Protect is off
[   22.424590] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   22.424626] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   22.424712] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   22.424731] sd 0:0:0:0: [sda] Write Protect is off
[   22.424734] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   22.424770] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   22.424774]  sda: sda1 sda2 < sda5 >
[   22.551064] sd 0:0:0:0: [sda] Attached SCSI disk
[   22.558876] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   22.558881] Uniform CD-ROM driver Revision: 3.20
[   22.558973] sr 5:0:0:0: Attached scsi CD-ROM sr0
[   23.220984] PM: Starting manual resume from disk
[   23.220989] PM: Resume from partition 8:5
[   23.220991] PM: Checking hibernation image.
[   23.221145] PM: Resume from disk failed.
[   23.293801] kjournald starting.  Commit interval 5 seconds
[   23.293812] EXT3-fs: mounted filesystem with ordered data mode.
[   29.259800] udevd version 124 started
[   29.568021] Linux agpgart interface v0.103
[   29.626223] agpgart-intel 0000:00:00.0: Intel Mobile Intel? GM45 Express Chipset
[   29.626555] agpgart-intel 0000:00:00.0: detected 131068K stolen memory
[   29.633921] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[   29.787246] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   29.813222] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[   29.836059] ACPI: Power Button (FF) [PWRF]
[   29.836146] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[   29.868037] ACPI: Power Button (CM) [PWRB]
[   29.868126] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[   29.871012] ACPI: Lid Switch [LID0]
[   29.871976] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   29.926160] ACPI: Battery Slot [BAT0] (battery present)
[   29.968333] ACPI: AC Adapter [ADP0] (on-line)
[   30.102322] acpi device:04: registered as cooling_device3
[   30.102828] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input5
[   30.124072] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[   30.396779] Linux video capture interface: v2.00
[   30.515731] uvcvideo: Found UVC 1.00 device CNF7051 (04f2:b070)
[   30.531664] input: CNF7051 as /devices/pci0000:00/0000:00:1a.7/usb3/3-2/3-2:1.0/input/input6
[   30.531715] usbcore: registered new interface driver uvcvideo
[   30.531759] USB Video Class driver (v0.1.0)
[   30.577655] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   30.577691] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   30.613789] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[   30.832404] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   31.668145] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04711/0xa04000
[   31.668152] synaptics: Toshiba Satellite L300 detected, limiting rate to 40pps.
[   31.757128] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[   32.278758] lp: driver loaded but no devices found
[   32.481346] Adding 5678936k swap on /dev/sda5.  Priority:-1 extents:1 across:5678936k
[   33.028042] EXT3 FS on sda1, internal journal
[   34.149339] type=1505 audit(1229783768.042:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4172
[   34.314849] type=1505 audit(1229783768.206:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4177
[   34.315064] type=1505 audit(1229783768.206:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4177
[   34.464601] ip_tables: (C) 2000-2006 Netfilter Core Team
[   35.150348] ACPI: WMI: Mapper loaded
[   36.040101] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   36.094475] apm: BIOS not found.
[   36.271152] ppdev: user-space parallel port driver
[   37.878692] Bluetooth: Core ver 2.13
[   37.878836] NET: Registered protocol family 31
[   37.878842] Bluetooth: HCI device and connection manager initialized
[   37.878851] Bluetooth: HCI socket layer initialized
[   37.900865] Bluetooth: L2CAP ver 2.11
[   37.900876] Bluetooth: L2CAP socket layer initialized
[   37.918585] Bluetooth: SCO (Voice Link) ver 0.6
[   37.918595] Bluetooth: SCO socket layer initialized
[   37.936074] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   37.936087] Bluetooth: BNEP filters: protocol multicast
[   37.971784] Bridge firewalling registered
[   37.972839] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[   38.077499] Bluetooth: RFCOMM socket layer initialized
[   38.077989] Bluetooth: RFCOMM TTY layer initialized
[   38.078000] Bluetooth: RFCOMM ver 1.10
[   42.181099] [drm] Initialized drm 1.1.0 20060810
[   42.188648] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   42.188667] pci 0000:00:02.0: setting latency timer to 64
[   42.191464] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   42.276822] r8169: eth0: link up
[   42.276851] r8169: eth0: link up
[   42.484543] NET: Registered protocol family 17
[   43.007010] set status page addr 0x07fff000
[  163.384269] CPU0 attaching NULL sched-domain.
[  163.384286] CPU1 attaching NULL sched-domain.
[  163.386205] CPU0 attaching sched-domain:
[  163.386213]  domain 0: span 0-1 level MC
[  163.386219]   groups: 0 1
[  163.386230] CPU1 attaching sched-domain:
[  163.386235]  domain 0: span 0-1 level MC
[  163.386239]   groups: 1 0
[  177.839226] NET: Registered protocol family 10
[  177.841487] lo: Disabled Privacy Extensions
[  188.752025] eth0: no IPv6 routers present
[  234.704731] type=1503 audit(1229783968.598:5): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5787/net/" pid=5787 profile="/usr/sbin/cupsd"
[  235.761308] type=1503 audit(1229783969.655:6): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5791/net/" pid=5791 profile="/usr/sbin/cupsd"
[  235.761368] type=1503 audit(1229783969.655:7): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=5791 profile="/usr/sbin/cupsd"
[  235.761380] type=1503 audit(1229783969.655:8): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=5791 profile="/usr/sbin/cupsd"
[  235.761392] type=1503 audit(1229783969.655:9): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=5791 profile="/usr/sbin/cupsd"
[  235.761404] type=1503 audit(1229783969.655:10): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=5791 profile="/usr/sbin/cupsd"
[  235.761416] type=1503 audit(1229783969.655:11): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=5791 profile="/usr/sbin/cupsd"
[  235.761427] type=1503 audit(1229783969.655:12): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=5791 profile="/usr/sbin/cupsd"
[  235.761440] type=1503 audit(1229783969.655:13): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=5791 profile="/usr/sbin/cupsd"
[  235.761453] type=1503 audit(1229783969.655:14): operation="socket_create" family="x25" sock_type="seqpacket" protocol=0 pid=5791 profile="/usr/sbin/cupsd"

#4 Le 20/12/2008, à 21:03

dfvdfdffdf

Re : Problème WIFI, Intrepid, Realtek 8187b

marion@marion-laptop:~$ dmesg | tail
[  313.217645] type=1503 audit(1229798053.103:7): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=5847 profile="/usr/sbin/cupsd"
[  313.220880] type=1503 audit(1229798053.107:8): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=5847 profile="/usr/sbin/cupsd"
[  313.220898] type=1503 audit(1229798053.107:9): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=5847 profile="/usr/sbin/cupsd"
[  313.220909] type=1503 audit(1229798053.107:10): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=5847 profile="/usr/sbin/cupsd"
[  313.220921] type=1503 audit(1229798053.107:11): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=5847 profile="/usr/sbin/cupsd"
[  313.220934] type=1503 audit(1229798053.107:12): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=5847 profile="/usr/sbin/cupsd"
[  313.220945] type=1503 audit(1229798053.107:13): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=5847 profile="/usr/sbin/cupsd"
[  313.220957] type=1503 audit(1229798053.107:14): operation="socket_create" family="x25" sock_type="seqpacket" protocol=0 pid=5847 profile="/usr/sbin/cupsd"
[  323.836046] eth0: no IPv6 routers present
[  510.733956] usbcore: registered new interface driver rtl8187