Pages : 1
#1 Le 06/01/2009, à 14:08
- spatzounette
Lenteur au démarrage[résolu]
Salut à tous les ubunteros,
Je viens (grâce à ce forum)de résoudre un problème de connexion wifi sur mon portable Asus X50RL,
dual-boot XP-Ubuntu 8.10,mais la résolution de ce souci semble en avoir engendré un autre.C'est pour ça
que je poste dans une autre catégorie que "wifi",ne sachant trop ou poster.
Je m'explique: lors du démarrage la barre de progression se fige à peu près à moitié chemin pendant au moins
une minute et finit par repartir.Le boot se termine alors normalement et tout fonctionne.
Autrefois le boot était beaucoup plus rapide.
Je soupçonne un probleme de configuration réseau mais si qqn a une piste qu'il n'hésite pas à m'en faire part.
Merci d'avance.
Dernière modification par spatzounette (Le 06/01/2009, à 17:06)
Il est très facile de se compliquer la vie,alors qu'il est très compliqué de se la simplifier.
Ici se trouve ma musique libre.
Hors ligne
#2 Le 06/01/2009, à 14:11
- Angelius
Re : Lenteur au démarrage[résolu]
Pour t'aider, tu pourrais afficher le texte lors du boot plutot que l'image. Cela t'apporterais des infos.
sinon, va dans préférences, sessions et retire des services inutiles au démarage.
Hors ligne
#3 Le 06/01/2009, à 14:20
- spatzounette
Re : Lenteur au démarrage[résolu]
Le verbose au démarrage c'est avec "echap"?
Il est très facile de se compliquer la vie,alors qu'il est très compliqué de se la simplifier.
Ici se trouve ma musique libre.
Hors ligne
#4 Le 06/01/2009, à 14:21
- sylvainsjc
Re : Lenteur au démarrage[résolu]
après le boot, tu ouvres ta session et tu nous retourne le résultat de dmesg
ROSA Desktop Fresh KDE 4.13.3
Mon blog sur Linux : http://linuxadvantage.blogspot.com/
Hors ligne
#5 Le 06/01/2009, à 14:29
- spatzounette
Re : Lenteur au démarrage[résolu]
Voilà,c'est un roman!
[ 0.596452] PCI: 0000:00:12.0 reg 24 32bit mmio: [febffc00, febfffff]
[ 0.596492] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.596528] PCI: 0000:00:13.0 reg 10 32bit mmio: [febfe000, febfefff]
[ 0.596610] PCI: 0000:00:13.1 reg 10 32bit mmio: [febfd000, febfdfff]
[ 0.596692] PCI: 0000:00:13.2 reg 10 32bit mmio: [febfc000, febfcfff]
[ 0.596773] PCI: 0000:00:13.3 reg 10 32bit mmio: [febfb000, febfbfff]
[ 0.596856] PCI: 0000:00:13.4 reg 10 32bit mmio: [febfa000, febfafff]
[ 0.596966] PCI: 0000:00:13.5 reg 10 32bit mmio: [febff800, febff8ff]
[ 0.597039] pci 0000:00:13.5: supports D1
[ 0.597041] pci 0000:00:13.5: supports D2
[ 0.597043] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.597049] pci 0000:00:13.5: PME# disabled
[ 0.597078] PCI: 0000:00:14.0 reg 10 io port: [b00, b0f]
[ 0.597159] PCI: 0000:00:14.1 reg 10 io port: [0, 7]
[ 0.597169] PCI: 0000:00:14.1 reg 14 io port: [0, 3]
[ 0.597179] PCI: 0000:00:14.1 reg 18 io port: [0, 7]
[ 0.597189] PCI: 0000:00:14.1 reg 1c io port: [0, 3]
[ 0.597199] PCI: 0000:00:14.1 reg 20 io port: [ff00, ff0f]
[ 0.597277] PCI: 0000:00:14.2 reg 10 64bit mmio: [febf4000, febf7fff]
[ 0.597338] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.597344] pci 0000:00:14.2: PME# disabled
[ 0.597529] PCI: 0000:01:05.0 reg 10 32bit mmio: [a0000000, afffffff]
[ 0.597536] PCI: 0000:01:05.0 reg 14 io port: [9800, 98ff]
[ 0.597542] PCI: 0000:01:05.0 reg 18 32bit mmio: [fa8f0000, fa8fffff]
[ 0.597560] PCI: 0000:01:05.0 reg 30 32bit mmio: [fa8c0000, fa8dffff]
[ 0.597574] pci 0000:01:05.0: supports D1
[ 0.597576] pci 0000:01:05.0: supports D2
[ 0.597606] PCI: bridge 0000:00:01.0 io port: [9000, 9fff]
[ 0.597611] PCI: bridge 0000:00:01.0 32bit mmio: [fa800000, fa8fffff]
[ 0.597615] PCI: bridge 0000:00:01.0 32bit mmio pref: [9ff00000, bfefffff]
[ 0.597683] PCI: 0000:02:00.0 reg 10 64bit mmio: [fa9f0000, fa9fffff]
[ 0.597822] PCI: bridge 0000:00:04.0 32bit mmio: [fa900000, fa9fffff]
[ 0.597900] PCI: bridge 0000:00:05.0 io port: [a000, bfff]
[ 0.597904] PCI: bridge 0000:00:05.0 32bit mmio: [faa00000, fe9fffff]
[ 0.597910] PCI: bridge 0000:00:05.0 64bit mmio pref: [bff00000, dfefffff]
[ 0.597974] PCI: 0000:06:00.0 reg 10 64bit mmio: [feac0000, feafffff]
[ 0.598015] PCI: 0000:06:00.0 reg 30 32bit mmio: [feaa0000, feabffff]
[ 0.598047] pci 0000:06:00.0: PME# supported from D3hot D3cold
[ 0.598054] pci 0000:06:00.0: PME# disabled
[ 0.598123] PCI: bridge 0000:00:06.0 32bit mmio: [fea00000, feafffff]
[ 0.600142] pci 0000:00:14.4: transparent bridge
[ 0.600184] bus 00 -> node 0
[ 0.600196] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.600428] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.600694] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 0.600875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[ 0.601051] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.601283] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[ 0.608225] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12)
[ 0.608434] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12)
[ 0.608640] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 12)
[ 0.608844] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12)
[ 0.609049] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12) *0, disabled.
[ 0.609254] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12) *0, disabled.
[ 0.609460] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12)
[ 0.609664] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12) *0, disabled.
[ 0.609750] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.609750] pnp: PnP ACPI init
[ 0.609750] ACPI: bus type pnp registered
[ 0.612938] pnp: PnP ACPI: found 11 devices
[ 0.612938] ACPI: ACPI bus type pnp unregistered
[ 0.612938] PnPBIOS: Disabled by ACPI PNP
[ 0.612938] PCI: Using ACPI for IRQ routing
[ 0.620042] NET: Registered protocol family 8
[ 0.620045] NET: Registered protocol family 20
[ 0.620064] NetLabel: Initializing
[ 0.620064] NetLabel: domain hash size = 128
[ 0.620064] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.620074] NetLabel: unlabeled traffic allowed by default
[ 0.620632] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.620636] actual entries 65620
[ 0.620797] AppArmor: AppArmor Filesystem Enabled
[ 0.620823] ACPI: RTC can wake from S4
[ 0.628067] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 0.628070] system 00:05: ioport range 0x40b-0x40b has been reserved
[ 0.628074] system 00:05: ioport range 0x4d6-0x4d6 has been reserved
[ 0.628077] system 00:05: ioport range 0xc00-0xc01 has been reserved
[ 0.628080] system 00:05: ioport range 0xc14-0xc14 has been reserved
[ 0.628084] system 00:05: ioport range 0xc50-0xc51 has been reserved
[ 0.628087] system 00:05: ioport range 0xc52-0xc52 has been reserved
[ 0.628090] system 00:05: ioport range 0xc6c-0xc6c has been reserved
[ 0.628093] system 00:05: ioport range 0xc6f-0xc6f has been reserved
[ 0.628097] system 00:05: ioport range 0xcd0-0xcd1 has been reserved
[ 0.628100] system 00:05: ioport range 0xcd2-0xcd3 has been reserved
[ 0.628104] system 00:05: ioport range 0xcd4-0xcd5 has been reserved
[ 0.628107] system 00:05: ioport range 0xcd6-0xcd7 has been reserved
[ 0.628110] system 00:05: ioport range 0xcd8-0xcdf has been reserved
[ 0.628114] system 00:05: ioport range 0x800-0x89f has been reserved
[ 0.628117] system 00:05: ioport range 0xb00-0xb1f could not be reserved
[ 0.628121] system 00:05: ioport range 0x900-0x90f has been reserved
[ 0.628124] system 00:05: ioport range 0x910-0x91f has been reserved
[ 0.628128] system 00:05: ioport range 0xfe00-0xfefe has been reserved
[ 0.628131] system 00:05: ioport range 0x4000-0x40fe has been reserved
[ 0.628136] system 00:05: iomem range 0xfed45000-0xfed89fff has been reserved
[ 0.628140] system 00:05: iomem range 0xffb80000-0xffbfffff could not be reserved
[ 0.628143] system 00:05: iomem range 0xfff80000-0xffffffff could not be reserved
[ 0.628153] system 00:08: ioport range 0x250-0x253 has been reserved
[ 0.628156] system 00:08: ioport range 0x256-0x25f has been reserved
[ 0.628160] system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.628163] system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.628170] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.628178] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 0.628182] system 00:0a: iomem range 0xc0000-0xcffff could not be reserved
[ 0.628185] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved
[ 0.628189] system 00:0a: iomem range 0x100000-0x77ffffff could not be reserved
[ 0.663380] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.663384] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.663390] pci 0000:00:01.0: MEM window: 0xfa800000-0xfa8fffff
[ 0.663394] pci 0000:00:01.0: PREFETCH window: 0x0000009ff00000-0x000000bfefffff
[ 0.663400] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[ 0.663403] pci 0000:00:04.0: IO window: disabled
[ 0.663408] pci 0000:00:04.0: MEM window: 0xfa900000-0xfa9fffff
[ 0.663412] pci 0000:00:04.0: PREFETCH window: disabled
[ 0.663418] pci 0000:00:05.0: PCI bridge, secondary bus 0000:03
[ 0.663421] pci 0000:00:05.0: IO window: 0xa000-0xbfff
[ 0.663426] pci 0000:00:05.0: MEM window: 0xfaa00000-0xfe9fffff
[ 0.663431] pci 0000:00:05.0: PREFETCH window: 0x000000bff00000-0x000000dfefffff
[ 0.663437] pci 0000:00:06.0: PCI bridge, secondary bus 0000:06
[ 0.663439] pci 0000:00:06.0: IO window: disabled
[ 0.663444] pci 0000:00:06.0: MEM window: 0xfea00000-0xfeafffff
[ 0.663448] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.663454] pci 0000:00:07.0: PCI bridge, secondary bus 0000:07
[ 0.663457] pci 0000:00:07.0: IO window: disabled
[ 0.663461] pci 0000:00:07.0: MEM window: disabled
[ 0.663465] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.663471] pci 0000:00:14.4: PCI bridge, secondary bus 0000:08
[ 0.663473] pci 0000:00:14.4: IO window: disabled
[ 0.663481] pci 0000:00:14.4: MEM window: disabled
[ 0.663487] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.663512] pci 0000:00:04.0: setting latency timer to 64
[ 0.663521] pci 0000:00:05.0: setting latency timer to 64
[ 0.663530] pci 0000:00:06.0: setting latency timer to 64
[ 0.663539] pci 0000:00:07.0: setting latency timer to 64
[ 0.663550] bus: 00 index 0 io port: [0, ffff]
[ 0.663552] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.663555] bus: 01 index 0 io port: [9000, 9fff]
[ 0.663557] bus: 01 index 1 mmio: [fa800000, fa8fffff]
[ 0.663560] bus: 01 index 2 mmio: [9ff00000, bfefffff]
[ 0.663562] bus: 01 index 3 mmio: [0, 0]
[ 0.663564] bus: 02 index 0 mmio: [0, 0]
[ 0.663567] bus: 02 index 1 mmio: [fa900000, fa9fffff]
[ 0.663569] bus: 02 index 2 mmio: [0, 0]
[ 0.663571] bus: 02 index 3 mmio: [0, 0]
[ 0.663573] bus: 03 index 0 io port: [a000, bfff]
[ 0.663576] bus: 03 index 1 mmio: [faa00000, fe9fffff]
[ 0.663578] bus: 03 index 2 mmio: [bff00000, dfefffff]
[ 0.663580] bus: 03 index 3 mmio: [0, 0]
[ 0.663583] bus: 06 index 0 mmio: [0, 0]
[ 0.663585] bus: 06 index 1 mmio: [fea00000, feafffff]
[ 0.663587] bus: 06 index 2 mmio: [0, 0]
[ 0.663589] bus: 06 index 3 mmio: [0, 0]
[ 0.663591] bus: 07 index 0 mmio: [0, 0]
[ 0.663593] bus: 07 index 1 mmio: [0, 0]
[ 0.663596] bus: 07 index 2 mmio: [0, 0]
[ 0.663598] bus: 07 index 3 mmio: [0, 0]
[ 0.663600] bus: 08 index 0 mmio: [0, 0]
[ 0.663602] bus: 08 index 1 mmio: [0, 0]
[ 0.663604] bus: 08 index 2 mmio: [0, 0]
[ 0.663606] bus: 08 index 3 io port: [0, ffff]
[ 0.663608] bus: 08 index 4 mmio: [0, ffffffff]
[ 0.663620] NET: Registered protocol family 2
[ 0.676096] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.676455] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.677411] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.678340] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.678345] TCP reno registered
[ 0.684218] NET: Registered protocol family 1
[ 0.684399] checking if image is initramfs... it is
[ 1.160534] Switched to high resolution mode on CPU 1
[ 1.164070] Switched to high resolution mode on CPU 0
[ 1.513264] Freeing initrd memory: 8309k freed
[ 1.513905] Simple Boot Flag at 0xff set to 0x1
[ 1.514966] audit: initializing netlink socket (disabled)
[ 1.515010] type=2000 audit(1231248145.513:1): initialized
[ 1.521871] highmem bounce pool size: 64 pages
[ 1.521879] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.524568] VFS: Disk quotas dquot_6.5.1
[ 1.524671] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.524809] msgmni has been set to 1746
[ 1.524959] io scheduler noop registered
[ 1.524962] io scheduler anticipatory registered
[ 1.524965] io scheduler deadline registered
[ 1.524979] io scheduler cfq registered (default)
[ 1.648041] pci 0000:01:05.0: Boot video device
[ 1.648188] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 1.648234] pcieport-driver 0000:00:04.0: found MSI capability
[ 1.648279] pci_express 0000:00:04.0:pcie00: allocate port service
[ 1.648392] pcieport-driver 0000:00:05.0: setting latency timer to 64
[ 1.648434] pcieport-driver 0000:00:05.0: found MSI capability
[ 1.648476] pci_express 0000:00:05.0:pcie00: allocate port service
[ 1.648580] pcieport-driver 0000:00:06.0: setting latency timer to 64
[ 1.648622] pcieport-driver 0000:00:06.0: found MSI capability
[ 1.648663] pci_express 0000:00:06.0:pcie00: allocate port service
[ 1.648771] pcieport-driver 0000:00:07.0: setting latency timer to 64
[ 1.648814] pcieport-driver 0000:00:07.0: found MSI capability
[ 1.648854] pci_express 0000:00:07.0:pcie00: allocate port service
[ 1.649229] isapnp: Scanning for PnP cards...
[ 2.003727] isapnp: No Plug & Play device found
[ 2.044968] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.047778] brd: module loaded
[ 2.047868] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 2.048042] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.051279] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.052655] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.052662] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.052666] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.052668] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.052671] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.059883] mice: PS/2 mouse device common for all mice
[ 2.060062] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.060091] rtc0: alarms up to one month, y3k
[ 2.060246] EISA: Probing bus 0 at eisa.0
[ 2.060271] Cannot allocate resource for EISA slot 4
[ 2.060293] EISA: Detected 0 cards.
[ 2.060297] cpuidle: using governor ladder
[ 2.060300] cpuidle: using governor menu
[ 2.060931] TCP cubic registered
[ 2.060974] Using IPI No-Shortcut mode
[ 2.061217] registered taskstats version 1
[ 2.061377] Magic number: 9:618:381
[ 2.061611] rtc_cmos 00:02: setting system clock to 2009-01-06 13:22:27 UTC (1231248147)
[ 2.061615] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.061618] EDD information not available.
[ 2.062002] Freeing unused kernel memory: 424k freed
[ 2.062045] Write protecting the kernel text: 2576k
[ 2.062075] Write protecting the kernel read-only data: 936k
[ 2.094540] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 2.130582] compcache: Compressed swap size set to: 485660 KB
[ 2.131686] TLSF: pool: f8832000, init_size=16384, max_size=0, grow_size=16384
[ 2.241241] fuse init (API version 7.9)
[ 2.336719] ACPI: SSDT 77FA7C10, 0C99 (r1 AMI CPU1PM 1 INTL 20060113)
[ 2.337240] ACPI: duty_cycle spans bit 4
[ 2.340151] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 2.340225] processor ACPI0007:00: registered as cooling_device0
[ 2.340461] ACPI: SSDT 77FA88B0, 0C99 (r1 AMI CPU2PM 1 INTL 20060113)
[ 2.341394] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 2.341453] processor ACPI0007:01: registered as cooling_device1
[ 2.344537] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 2.346033] Marking TSC unstable due to TSC halts in idle
[ 2.364367] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.365517] ACPI: Thermal Zone [THRM] (52 C)
[ 2.811618] usbcore: registered new interface driver usbfs
[ 2.811650] usbcore: registered new interface driver hub
[ 2.827055] usbcore: registered new device driver usb
[ 2.828199] No dock devices found.
[ 2.864673] SCSI subsystem initialized
[ 2.869247] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.869267] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 2.869329] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 2.869372] ehci_hcd 0000:00:13.5: debug port 1
[ 2.869391] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfebff800
[ 2.876974] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.880163] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.880410] usb usb1: configuration #1 chosen from 1 choice
[ 2.880447] hub 1-0:1.0: USB hub found
[ 2.880460] hub 1-0:1.0: 10 ports detected
[ 2.925214] libata version 3.00 loaded.
[ 3.000051] Adding 485656k swap on /dev/ramzswap0. Priority:100 extents:1 across:485656k
[ 3.088607] ahci 0000:00:12.0: version 3.0
[ 3.088648] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.088684] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 3.088809] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 3.088813] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio slum part
[ 3.089344] scsi0 : ahci
[ 3.089563] scsi1 : ahci
[ 3.089661] scsi2 : ahci
[ 3.089772] scsi3 : ahci
[ 3.089917] ata1: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd00 irq 22
[ 3.089922] ata2: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd80 irq 22
[ 3.089927] ata3: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe00 irq 22
[ 3.089931] ata4: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe80 irq 22
[ 3.200052] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 3.352965] usb 1-4: configuration #1 chosen from 1 choice
[ 3.524083] usb 1-7: new high speed USB device using ehci_hcd and address 4
[ 3.572086] ata1: softreset failed (device not ready)
[ 3.572093] ata1: failed due to HW bug, retry pmp=0
[ 3.679712] usb 1-7: configuration #1 chosen from 1 choice
[ 3.691093] usbcore: registered new interface driver libusual
[ 3.699088] Initializing USB Mass Storage driver...
[ 3.699215] scsi4 : SCSI emulation for USB Mass Storage devices
[ 3.699344] usbcore: registered new interface driver usb-storage
[ 3.699348] USB Mass Storage support registered.
[ 3.699495] usb-storage: device found at 2
[ 3.699497] usb-storage: waiting for device to settle before scanning
[ 3.736095] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.790717] ata1.00: ATA-8: WDC WD2500BEVS-22UST0, 01.01A01, max UDMA/133
[ 3.790720] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.790734] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.791600] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 3.791604] ata1.00: configured for UDMA/133
[ 4.108095] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.428091] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.748092] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.748266] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVS-2 01.0 PQ: 0 ANSI: 5
[ 4.748489] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.748574] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.748608] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 4.748671] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 4.748706] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfebfe000
[ 4.808364] usb usb2: configuration #1 chosen from 1 choice
[ 4.808400] hub 2-0:1.0: USB hub found
[ 4.808414] hub 2-0:1.0: 2 ports detected
[ 4.916361] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.916381] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 4.916418] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 4.916451] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfebfd000
[ 4.976190] usb usb3: configuration #1 chosen from 1 choice
[ 4.976223] hub 3-0:1.0: USB hub found
[ 4.976235] hub 3-0:1.0: 2 ports detected
[ 5.080692] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.080710] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 5.080749] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 5.080776] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfebfc000
[ 5.140220] usb usb4: configuration #1 chosen from 1 choice
[ 5.140260] hub 4-0:1.0: USB hub found
[ 5.140273] hub 4-0:1.0: 2 ports detected
[ 5.348742] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.348760] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 5.348800] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 5.348823] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfebfb000
[ 5.408190] usb usb5: configuration #1 chosen from 1 choice
[ 5.408224] hub 5-0:1.0: USB hub found
[ 5.408236] hub 5-0:1.0: 2 ports detected
[ 5.484069] usb 4-1: new low speed USB device using ohci_hcd and address 2
[ 5.512770] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.512791] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 5.512832] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 5.512853] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfebfa000
[ 5.572434] usb usb6: configuration #1 chosen from 1 choice
[ 5.572700] hub 6-0:1.0: USB hub found
[ 5.572714] hub 6-0:1.0: 2 ports detected
[ 5.651561] usb 4-1: configuration #1 chosen from 1 choice
[ 5.676942] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.676991] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 5.677161] scsi5 : pata_atiixp
[ 5.677811] scsi6 : pata_atiixp
[ 5.679200] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 5.679204] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 5.840605] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WR02, max UDMA/33
[ 5.856605] ata5.00: configured for UDMA/33
[ 6.015788] scsi 5:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WR02 PQ: 0 ANSI: 5
[ 6.017360] scsi 5:0:0:0: Attached scsi generic sg1 type 5
[ 6.096939] usbcore: registered new interface driver hiddev
[ 6.101884] Driver 'sd' needs updating - please use bus_type methods
[ 6.102067] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 6.102091] sd 0:0:0:0: [sda] Write Protect is off
[ 6.102094] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.102133] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.102250] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 6.102272] sd 0:0:0:0: [sda] Write Protect is off
[ 6.102275] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.102313] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.102318] sda:<6>input: HID 1241:1177 as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1:1.0/input/input2
[ 6.113121] Driver 'sr' needs updating - please use bus_type methods
[ 6.116236] input,hidraw0: USB HID v1.00 Mouse [HID 1241:1177] on usb-0000:00:13.2-1
[ 6.116271] usbcore: registered new interface driver usbhid
[ 6.116276] usbhid: v2.6:USB HID core driver
[ 6.148887] sda1 sda2 sda3 < sda5 sda6 >
[ 6.165787] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.184202] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.184208] Uniform CD-ROM driver Revision: 3.20
[ 6.184346] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 6.683256] kjournald starting. Commit interval 5 seconds
[ 6.683272] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.696842] usb-storage: device scan complete
[ 8.703762] scsi 4:0:0:0: Direct-Access Generic- xD/SDMMC/MS/Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 8.706837] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 8.707010] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 13.119618] udevd version 124 started
[ 13.574806] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.606448] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.720681] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 13.737050] ACPI: Power Button (FF) [PWRF]
[ 13.737277] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 13.739307] ACPI: Lid Switch [LID]
[ 13.739406] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 13.773046] ACPI: Power Button (CM) [PWRB]
[ 13.773157] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
[ 13.793507] Linux agpgart interface v0.103
[ 13.805039] ACPI: Sleep Button (CM) [SLPB]
[ 13.942282] asus-laptop: Asus Laptop Support version 0.42
[ 13.946830] asus-laptop: F5RL model detected
[ 14.009998] ACPI: AC Adapter [AC0] (on-line)
[ 14.147024] ACPI: Battery Slot [BAT0] (battery present)
[ 14.164632] acpi device:04: registered as cooling_device2
[ 14.164807] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input7
[ 14.185061] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 14.224575] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
[ 14.240364] Atheros(R) L2 Ethernet Driver - version 2.0.4
[ 14.240368] Copyright (c) 2007 Atheros Corporation.
[ 14.387787] [fglrx] Maximum main memory to use for locked dma buffers: 1775 MBytes.
[ 14.387821] [fglrx] vendor: 1002 device: 5a62 count: 1
[ 14.388934] [fglrx] ioport: bar 1, base 0x9800, size: 0x100
[ 14.388954] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.390562] [fglrx] PAT is enabled successfully!
[ 14.390603] [fglrx] module loaded - fglrx 8.54.3 [Oct 10 2008] with 1 minors
[ 14.491109] ndiswrapper: driver net5211 (,05/02/2007,5.3.0.45) loaded
[ 14.491524] ndiswrapper 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.491600] ndiswrapper (ZwClose:2198): closing handle 0xf6b76228 not implemented
[ 14.491818] ndiswrapper 0000:02:00.0: setting latency timer to 64
[ 14.999524] Linux video capture interface: v2.00
[ 15.023747] ndiswrapper: using IRQ 16
[ 15.027441] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (174f:5a35)
[ 15.082487] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 15.225446] wlan0: ethernet device 00:15:af:8a:73:ec using serialized NDIS driver: net5211, version: 0x50003, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 168C:001C.5.conf
[ 15.232456] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 15.235968] atl2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 15.235982] atl2 0000:06:00.0: setting latency timer to 64
[ 15.348688] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SMB0 [0xb00-0xb0f]
[ 15.348692] ACPI: Device needs an ACPI driver
[ 15.348702] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 15.366550] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:13.5/usb1/1-7/1-7:1.0/input/input9
[ 15.388340] usbcore: registered new interface driver ndiswrapper
[ 15.388903] usbcore: registered new interface driver uvcvideo
[ 15.388907] USB Video Class driver (v0.1.0)
[ 15.604043] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.051662] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[ 16.093513] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input10
[ 17.133596] lp: driver loaded but no devices found
[ 17.877062] EXT3 FS on sda6, internal journal
[ 18.993299] type=1505 audit(1231244564.050:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4288
[ 19.200565] type=1505 audit(1231244564.258:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4293
[ 19.200948] type=1505 audit(1231244564.258:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4293
[ 19.377161] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 20.696580] NET: Registered protocol family 17
[ 91.866867] NET: Registered protocol family 10
[ 91.867464] lo: Disabled Privacy Extensions
[ 91.868435] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 92.369298] ACPI: WMI: Mapper loaded
[ 93.253575] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 93.329406] apm: BIOS not found.
[ 93.633935] ppdev: user-space parallel port driver
[ 100.069314] [fglrx] GART Table is not in FRAME_BUFFER range
[ 100.074353] [fglrx] Reserved FB block: Shared offset:0, size:40000
[ 100.074373] [fglrx] Reserved FB block: Unshared offset:7ff5000, size:b000
[ 100.202906] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 105.450458] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 130.844459] CPU0 attaching NULL sched-domain.
[ 130.844480] CPU1 attaching NULL sched-domain.
[ 130.847052] CPU0 attaching sched-domain:
[ 130.847063] domain 0: span 0-1 level MC
[ 130.847070] groups: 0 1
[ 130.847086] CPU1 attaching sched-domain:
[ 130.847091] domain 0: span 0-1 level MC
[ 130.847097] groups: 1 0
[ 159.641407] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 170.072061] wlan0: no IPv6 routers presentIl est très facile de se compliquer la vie,alors qu'il est très compliqué de se la simplifier.
Ici se trouve ma musique libre.
Hors ligne
#6 Le 06/01/2009, à 15:14
- sylvainsjc
Re : Lenteur au démarrage[résolu]
Ton accès ethernet filaire sur eth0 est lancé au démarrage, il faut le désactiver si tu es en Wifi 
ROSA Desktop Fresh KDE 4.13.3
Mon blog sur Linux : http://linuxadvantage.blogspot.com/
Hors ligne
#7 Le 06/01/2009, à 15:20
- spatzounette
Re : Lenteur au démarrage[résolu]
Merci, mais excuse mon ignorance crasse,on fait comment?
Il est très facile de se compliquer la vie,alors qu'il est très compliqué de se la simplifier.
Ici se trouve ma musique libre.
Hors ligne
#8 Le 06/01/2009, à 15:28
- sylvainsjc
Re : Lenteur au démarrage[résolu]
ROSA Desktop Fresh KDE 4.13.3
Mon blog sur Linux : http://linuxadvantage.blogspot.com/
Hors ligne
#9 Le 06/01/2009, à 15:44
- spatzounette
Re : Lenteur au démarrage[résolu]
OK mais dans la fenêtre Network configuration à l'onglet "filaire" y a rien!
Et dans le nm-applet j'ai réseau filaire en grisé et "le périphérique n'est pas géré"
Il est très facile de se compliquer la vie,alors qu'il est très compliqué de se la simplifier.
Ici se trouve ma musique libre.
Hors ligne
#10 Le 06/01/2009, à 15:50
- sylvainsjc
Re : Lenteur au démarrage[résolu]
Ok
comment as tu fais ta config de wifi ?
Quel est le contenu du fichier /etc/network/interfaces
ROSA Desktop Fresh KDE 4.13.3
Mon blog sur Linux : http://linuxadvantage.blogspot.com/
Hors ligne
#11 Le 06/01/2009, à 16:36
- spatzounette
Re : Lenteur au démarrage[résolu]
Le voilà
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcpIl est très facile de se compliquer la vie,alors qu'il est très compliqué de se la simplifier.
Ici se trouve ma musique libre.
Hors ligne
#12 Le 06/01/2009, à 16:42
- sylvainsjc
Re : Lenteur au démarrage[résolu]
Si l'accès ethernet filaire n'est pas utilisé alors modifier ce fichier interfaces
sudo nano /etc/network/interfacesmettre un dièse (#) devant les 2 lignes suivantes
auto eth0
iface eth0 inet dhcpROSA Desktop Fresh KDE 4.13.3
Mon blog sur Linux : http://linuxadvantage.blogspot.com/
Hors ligne
#13 Le 06/01/2009, à 17:05
- spatzounette
Re : Lenteur au démarrage[résolu]
Merci mille fois sylvain problème résolu.
je vais éditer mon 1er post .
Il est très facile de se compliquer la vie,alors qu'il est très compliqué de se la simplifier.
Ici se trouve ma musique libre.
Hors ligne
Pages : 1