Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 09/02/2009, à 02:36

Honorat

Demarrage lent et les ports USB ne fonctione plus [Resolu]

Salut,
je detaille mon problème,
Lorsque je demarre Ubuntu la barre de charge se bloque à un certain niveau pandant 2 à 3 minutes et affiche la fenètre de connection.

et à chaque fois je ne peu plus avoir accès aux clés USB branchées (DD externe , clé USB)
ce pb est quand même très embêtant,  puisque j'ai plus besoin de clé USB pour les transfert de fichier qu'autres moyens.

Je ne sais pas si cette precision vous serviras, mais j'ai dejà eu un pb de démarrage et ce problème a été partiellement résolu en empêchant le chargement du module qui prenait en charge la webcam (gspca)

J'ai urgemment besoin de votre aide vu que j'ai toujours besoin des information qui sont sur mes support amovible.
sad

La clé fonctionne normalement sur XP (Je l'ai en dual boot) mais j'aimerais pouvoir les accédés directement sous Ubuntu.

Merci d'avance pour votre aide.

Dernière modification par Honorat (Le 10/02/2009, à 05:38)


/ Pour trouver sans chercher il faut \         \ (__)
| avoir longtemps chercher sans      |          (oo)
\ trouver...                                 /    /------\/
--------------------------------------     / |    ||

Hors ligne

#2 Le 09/02/2009, à 11:59

legz

Re : Demarrage lent et les ports USB ne fonctione plus [Resolu]

Un premier test rapide serait de tester les ports USB et le démarrage via un Live CD, au moins on pourrait trancher entre problème matériel et problème logiciel.

Dernière modification par legz (Le 09/02/2009, à 12:05)


Me suivre sur Twitter ? C'est par ici : http://twitter.com/legz !

Hors ligne

#3 Le 09/02/2009, à 12:20

Honorat

Re : Demarrage lent et les ports USB ne fonctione plus [Resolu]

j'ai XP en dual boot et sous XP mes ports marchent correctement, il faut forcement que j'utilise un live CD pour le test ?


/ Pour trouver sans chercher il faut \         \ (__)
| avoir longtemps chercher sans      |          (oo)
\ trouver...                                 /    /------\/
--------------------------------------     / |    ||

Hors ligne

#4 Le 09/02/2009, à 12:28

legz

Re : Demarrage lent et les ports USB ne fonctione plus [Resolu]

Donc on élimine le défaut matériel wink
Pas besoin de live CD donc.


Les lenteurs au démarrages sont arrivées du jour au lendemain ? Sans aucune modif' majeures pouvant justifier cela ?


Me suivre sur Twitter ? C'est par ici : http://twitter.com/legz !

Hors ligne

#5 Le 09/02/2009, à 12:33

Honorat

Re : Demarrage lent et les ports USB ne fonctione plus [Resolu]

Sous Ubuntu j'utilie un clavier et une souris USB qui fonctionnent correctement, c'est lorque je connecte les memoires USB que je ne reçois rien comme retour.

Excuser moi d'avoir omis ce detail important.

Que dois-je faire dans ce cas?


/ Pour trouver sans chercher il faut \         \ (__)
| avoir longtemps chercher sans      |          (oo)
\ trouver...                                 /    /------\/
--------------------------------------     / |    ||

Hors ligne

#6 Le 09/02/2009, à 12:39

Honorat

Re : Demarrage lent et les ports USB ne fonctione plus [Resolu]

Des explications à ce problème, j'en ai pas vraiment.
Je suis sous Intrepidex, même quand j'étais sous Hardy il arrivait qu'il se bloque à un certain niveau du chargement comme en ce moment.

Dernière modification par Honorat (Le 09/02/2009, à 12:40)


/ Pour trouver sans chercher il faut \         \ (__)
| avoir longtemps chercher sans      |          (oo)
\ trouver...                                 /    /------\/
--------------------------------------     / |    ||

Hors ligne

#7 Le 09/02/2009, à 12:53

legz

Re : Demarrage lent et les ports USB ne fonctione plus [Resolu]

Ok, et concernant d'autres péréphériques USB (webcam, imprimante, ou surtout disque dur externe...) tu peux faire des tests ?

Quid de l'accès au(x) disque(s) dur(s) ?
Aucun problème de temps d'accès, d'erreur de copies ou autres ?


Me suivre sur Twitter ? C'est par ici : http://twitter.com/legz !

Hors ligne

#8 Le 09/02/2009, à 13:48

Honorat

Re : Demarrage lent et les ports USB ne fonctione plus [Resolu]

c'est bizard, tout marche mtn!
qu'es qui peut peut causer ce genre d'évènement?
lorsque je fais lsusb voilà ce qui me ramène

Bus 005 Device 006: ID 04fc:0c15 Sunplus Technology Co., Ltd 
Bus 005 Device 005: ID 1043:8012 iCreate Technologies Corp. 
Bus 005 Device 002: ID 046d:0896 Logitech, Inc. OrbiCam
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 0458:0036 KYE Systems Corp. (Mouse Systems) Pocket Mouse LE
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 004: ID 045e:0734 Microsoft Corp. 
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

/ Pour trouver sans chercher il faut \         \ (__)
| avoir longtemps chercher sans      |          (oo)
\ trouver...                                 /    /------\/
--------------------------------------     / |    ||

Hors ligne

#9 Le 09/02/2009, à 15:47

legz

Re : Demarrage lent et les ports USB ne fonctione plus [Resolu]

Bah, là il te sort la liste des trucs branchés sur tes prises USB :
10 ports USB
- Une webcam logitech
- Une souris KYE
- Une clavier Microsoft
- 2 autres périphériques: Un SUN et un iCreate.

Il y donc 2 périphériques en plus par rapport à ton premier message, normal ?


Me suivre sur Twitter ? C'est par ici : http://twitter.com/legz !

Hors ligne

#10 Le 09/02/2009, à 19:36

Honorat

Re : Demarrage lent et les ports USB ne fonctione plus [Resolu]

Oui c'est normal parce que j'avais branché une clé USB et un DD externe pour faire l'essai!

Mais je redemarre l'ordinateur, et la galère recommence, mais cette fois j'ai pris soin de voir les messages d'erreur

Feb  9 13:11:50 honorat_laptop kernel: [  149.404623] vc032x: check sensor header 44
Feb  9 13:11:50 honorat_laptop kernel: [  149.405644] usb 5-4: USB disconnect, address 78
Feb  9 13:11:50 honorat_laptop kernel: [  149.405855] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  149.405942] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  149.406014] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  149.406087] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  149.406160] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  149.406233] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  149.406300] vc032x: Unknown sensor...
Feb  9 13:11:50 honorat_laptop kernel: [  149.406387] vc032x: probe of 5-4:1.0 failed with error -22
Feb  9 13:11:50 honorat_laptop kernel: [  149.676166] usb 5-4: new high speed USB device using ehci_hcd and address 79
Feb  9 13:11:50 honorat_laptop kernel: [  149.832679] usb 5-4: configuration #1 chosen from 1 choice
Feb  9 13:11:50 honorat_laptop kernel: [  149.833721] gspca: probing 046d:0896
Feb  9 13:11:50 honorat_laptop kernel: [  150.040600] vc032x: check sensor header 44
Feb  9 13:11:50 honorat_laptop kernel: [  150.041626] usb 5-4: USB disconnect, address 79
Feb  9 13:11:50 honorat_laptop kernel: [  150.041827] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  150.041912] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  150.041985] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  150.042057] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  150.042130] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  150.042202] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  150.042270] vc032x: Unknown sensor...
Feb  9 13:11:50 honorat_laptop kernel: [  150.042355] vc032x: probe of 5-4:1.0 failed with error -22
Feb  9 13:11:50 honorat_laptop kernel: [  150.312151] usb 5-4: new high speed USB device using ehci_hcd and address 80
Feb  9 13:11:50 honorat_laptop kernel: [  150.468657] usb 5-4: configuration #1 chosen from 1 choice
Feb  9 13:11:50 honorat_laptop kernel: [  150.469734] gspca: probing 046d:0896
Feb  9 13:11:50 honorat_laptop kernel: [  150.676582] vc032x: check sensor header 44
Feb  9 13:11:50 honorat_laptop kernel: [  150.677604] usb 5-4: USB disconnect, address 80
Feb  9 13:11:50 honorat_laptop kernel: [  150.677806] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  150.677892] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  150.677964] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  150.678036] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  150.678109] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  150.678182] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  150.678250] vc032x: Unknown sensor...
Feb  9 13:11:50 honorat_laptop kernel: [  150.678337] vc032x: probe of 5-4:1.0 failed with error -22
Feb  9 13:11:50 honorat_laptop kernel: [  150.948126] usb 5-4: new high speed USB device using ehci_hcd and address 81
Feb  9 13:11:50 honorat_laptop kernel: [  151.104649] usb 5-4: configuration #1 chosen from 1 choice
Feb  9 13:11:50 honorat_laptop kernel: [  151.105692] gspca: probing 046d:0896
Feb  9 13:11:50 honorat_laptop kernel: [  151.312561] vc032x: check sensor header 44
Feb  9 13:11:50 honorat_laptop kernel: [  151.313585] usb 5-4: USB disconnect, address 81
Feb  9 13:11:50 honorat_laptop kernel: [  151.313783] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  151.313868] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  151.313940] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  151.314012] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  151.314085] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  151.314156] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  151.314223] vc032x: Unknown sensor...
Feb  9 13:11:50 honorat_laptop kernel: [  151.314310] vc032x: probe of 5-4:1.0 failed with error -22
Feb  9 13:11:50 honorat_laptop kernel: [  151.584116] usb 5-4: new high speed USB device using ehci_hcd and address 82
Feb  9 13:11:50 honorat_laptop kernel: [  151.740481] usb 5-4: configuration #1 chosen from 1 choice
Feb  9 13:11:50 honorat_laptop kernel: [  151.741527] gspca: probing 046d:0896
Feb  9 13:11:50 honorat_laptop kernel: [  151.948539] vc032x: check sensor header 44
Feb  9 13:11:50 honorat_laptop kernel: [  151.949563] usb 5-4: USB disconnect, address 82
Feb  9 13:11:50 honorat_laptop kernel: [  151.949763] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  151.949848] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  151.949921] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  151.949993] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  151.950066] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  151.950138] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  151.950205] vc032x: Unknown sensor...
Feb  9 13:11:50 honorat_laptop kernel: [  151.950292] vc032x: probe of 5-4:1.0 failed with error -22
Feb  9 13:11:50 honorat_laptop kernel: [  152.220113] usb 5-4: new high speed USB device using ehci_hcd and address 83
Feb  9 13:11:50 honorat_laptop kernel: [  152.376588] usb 5-4: configuration #1 chosen from 1 choice
Feb  9 13:11:50 honorat_laptop kernel: [  152.377636] gspca: probing 046d:0896
Feb  9 13:11:50 honorat_laptop kernel: [  152.584517] vc032x: check sensor header 44
Feb  9 13:11:50 honorat_laptop kernel: [  152.585542] usb 5-4: USB disconnect, address 83
Feb  9 13:11:50 honorat_laptop kernel: [  152.585746] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  152.585832] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  152.585904] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  152.585976] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  152.586049] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  152.586122] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  152.586188] vc032x: Unknown sensor...
Feb  9 13:11:50 honorat_laptop kernel: [  152.586273] vc032x: probe of 5-4:1.0 failed with error -22
Feb  9 13:11:50 honorat_laptop kernel: [  152.856108] usb 5-4: new high speed USB device using ehci_hcd and address 84
Feb  9 13:11:50 honorat_laptop kernel: [  153.012690] usb 5-4: configuration #1 chosen from 1 choice
Feb  9 13:11:50 honorat_laptop kernel: [  153.013769] gspca: probing 046d:0896
Feb  9 13:11:50 honorat_laptop kernel: [  153.220496] vc032x: check sensor header 44
Feb  9 13:11:50 honorat_laptop kernel: [  153.221521] usb 5-4: USB disconnect, address 84
Feb  9 13:11:50 honorat_laptop kernel: [  153.221728] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  153.221813] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  153.221886] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  153.221958] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  153.222030] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  153.222102] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  153.222169] vc032x: Unknown sensor...
Feb  9 13:11:50 honorat_laptop kernel: [  153.222256] vc032x: probe of 5-4:1.0 failed with error -22
Feb  9 13:11:50 honorat_laptop kernel: [  153.492125] usb 5-4: new high speed USB device using ehci_hcd and address 85
Feb  9 13:11:50 honorat_laptop kernel: [  153.648687] usb 5-4: configuration #1 chosen from 1 choice
Feb  9 13:11:50 honorat_laptop kernel: [  153.649730] gspca: probing 046d:0896
Feb  9 13:11:50 honorat_laptop kernel: [  153.856601] vc032x: check sensor header 44
Feb  9 13:11:50 honorat_laptop kernel: [  153.857628] usb 5-4: USB disconnect, address 85
Feb  9 13:11:50 honorat_laptop kernel: [  153.857826] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  153.857911] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  153.857983] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  153.858055] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  153.858127] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  153.858199] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  153.858266] vc032x: Unknown sensor...
Feb  9 13:11:50 honorat_laptop kernel: [  153.858352] vc032x: probe of 5-4:1.0 failed with error -22
Feb  9 13:11:50 honorat_laptop kernel: [  154.128133] usb 5-4: new high speed USB device using ehci_hcd and address 86
Feb  9 13:11:50 honorat_laptop kernel: [  154.284543] usb 5-4: configuration #1 chosen from 1 choice
Feb  9 13:11:50 honorat_laptop kernel: [  154.285584] gspca: probing 046d:0896
Feb  9 13:11:50 honorat_laptop kernel: [  154.492581] vc032x: check sensor header 44
Feb  9 13:11:50 honorat_laptop kernel: [  154.493603] usb 5-4: USB disconnect, address 86
Feb  9 13:11:50 honorat_laptop kernel: [  154.493813] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  154.493900] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  154.493972] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  154.494044] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  154.494117] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  154.494190] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  154.494257] vc032x: Unknown sensor...
Feb  9 13:11:50 honorat_laptop kernel: [  154.494344] vc032x: probe of 5-4:1.0 failed with error -22
Feb  9 13:11:50 honorat_laptop kernel: [  154.764172] usb 5-4: new high speed USB device using ehci_hcd and address 87
Feb  9 13:11:50 honorat_laptop kernel: [  154.920681] usb 5-4: configuration #1 chosen from 1 choice
Feb  9 13:11:50 honorat_laptop kernel: [  154.921805] gspca: probing 046d:0896
Feb  9 13:11:50 honorat_laptop kernel: [  155.128560] vc032x: check sensor header 44
Feb  9 13:11:50 honorat_laptop kernel: [  155.129584] usb 5-4: USB disconnect, address 87
Feb  9 13:11:50 honorat_laptop kernel: [  155.129788] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  155.129874] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  155.129946] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  155.130018] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  155.130090] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  155.130162] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  155.130229] vc032x: Unknown sensor...
Feb  9 13:11:50 honorat_laptop kernel: [  155.130316] vc032x: probe of 5-4:1.0 failed with error -22
Feb  9 13:11:50 honorat_laptop kernel: [  155.400168] usb 5-4: new high speed USB device using ehci_hcd and address 88
Feb  9 13:11:50 honorat_laptop kernel: [  155.560620] usb 5-4: configuration #1 chosen from 1 choice
Feb  9 13:11:50 honorat_laptop kernel: [  155.561698] gspca: probing 046d:0896
Feb  9 13:11:50 honorat_laptop kernel: [  155.768541] vc032x: check sensor header 44
Feb  9 13:11:50 honorat_laptop kernel: [  155.769564] usb 5-4: USB disconnect, address 88
Feb  9 13:11:50 honorat_laptop kernel: [  155.769762] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  155.769848] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  155.769921] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  155.769994] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  155.770066] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  155.770138] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  155.770205] vc032x: Unknown sensor...
Feb  9 13:11:50 honorat_laptop kernel: [  155.770292] vc032x: probe of 5-4:1.0 failed with error -22
Feb  9 13:11:50 honorat_laptop kernel: [  156.040172] usb 5-4: new high speed USB device using ehci_hcd and address 89
Feb  9 13:11:50 honorat_laptop kernel: [  156.196723] usb 5-4: configuration #1 chosen from 1 choice
Feb  9 13:11:50 honorat_laptop kernel: [  156.197764] gspca: probing 046d:0896
Feb  9 13:11:50 honorat_laptop kernel: [  156.404645] vc032x: check sensor header 44
Feb  9 13:11:50 honorat_laptop kernel: [  156.405668] usb 5-4: USB disconnect, address 89
Feb  9 13:11:50 honorat_laptop kernel: [  156.405869] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  156.405954] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  156.406027] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  156.406099] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  156.406171] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  156.406244] vc032x: I2c Bus Busy Wait 0
Feb  9 13:11:50 honorat_laptop kernel: [  156.406311] vc032x: Unknown sensor...
Feb  9 13:11:50 honorat_laptop kernel: [  156.406396] vc032x: probe of 5-4:1.0 failed with error -22

O faite lorsque le chargement ce bloque, c'est le message qui passe en boucle

j''ai eu ces lignes en allant dans /var/log/messages

Je crois qu'avec  ce message vous serais mieux situé, merci d'avance
Quesque je dois faire?


/ Pour trouver sans chercher il faut \         \ (__)
| avoir longtemps chercher sans      |          (oo)
\ trouver...                                 /    /------\/
--------------------------------------     / |    ||

Hors ligne

#11 Le 09/02/2009, à 20:56

Honorat

Re : Demarrage lent et les ports USB ne fonctione plus [Resolu]

SVP,
ce demarrage est vraiment insurportable à vivre en plus de celà les memoires USB (clé USB, DD externe USB) ne fonctionnent plus,
je vous pris de bien vouloir m'aider, 
je suis perdu si je ne peux plus avoir accès a mes clés USB ! sad

Aidé moi SVP
sad


/ Pour trouver sans chercher il faut \         \ (__)
| avoir longtemps chercher sans      |          (oo)
\ trouver...                                 /    /------\/
--------------------------------------     / |    ||

Hors ligne

#12 Le 09/02/2009, à 22:07

fabux

Re : Demarrage lent et les ports USB ne fonctione plus [Resolu]

Salut,

je suis pas un pro mais, ça semble tourner autour du module vc032x (qui devrait être ta webcam) avec un busy bus répétitif et qu'il n'a pas l'air de reconnaitre le capteur.
Si tu peux, essai de débrancher ta webcam.
Sinon tentes de désactiver le module.

Hors ligne

#13 Le 10/02/2009, à 05:34

Honorat

Re : Demarrage lent et les ports USB ne fonctione plus [Resolu]

J'ai resolu mon problème
vc032x n'est pas un module,
J'ai plustot désactivé gspca , et enfin le demarrage retrouve sa rapidité habituel.

Encore une fois je contourne le problème.

Merci à tous le monde pour vos reponses, vous m'avez été d'un aide precieux.

Dernière modification par Honorat (Le 10/02/2009, à 05:37)


/ Pour trouver sans chercher il faut \         \ (__)
| avoir longtemps chercher sans      |          (oo)
\ trouver...                                 /    /------\/
--------------------------------------     / |    ||

Hors ligne

#14 Le 10/02/2009, à 10:58

fabux

Re : Demarrage lent et les ports USB ne fonctione plus [Resolu]

A mon avis pour régler définitivement ton problême...change de cam wink tongue

Hors ligne

#15 Le 10/02/2009, à 11:48

Honorat

Re : Demarrage lent et les ports USB ne fonctione plus [Resolu]

Je ne sais comment c'est possible, en tout cas ça n'a pas l'air d'être simple vu c'est une cam interne que j'ai.
Je suis en possetion d'un acer Aspire 5630 (un portable)
j'ai eu l'idée de demonter le portable pour voir ce que je pouvais faire, mais j'ai préféré désactiver le module.


/ Pour trouver sans chercher il faut \         \ (__)
| avoir longtemps chercher sans      |          (oo)
\ trouver...                                 /    /------\/
--------------------------------------     / |    ||

Hors ligne

#16 Le 10/02/2009, à 12:09

fabux

Re : Demarrage lent et les ports USB ne fonctione plus [Resolu]

Effectivement ça semble la meilleur solution smile big_smile lol

Hors ligne

#17 Le 10/02/2009, à 23:01

Honorat

Re : Demarrage lent et les ports USB ne fonctione plus [Resolu]

Je croie que le module qui devait être en plus dans la blacklist est
gspca_vc032x
parce que lorsque je desactive seulement gspca, le message apparait  tjrs

Après cette manip, je n'ai plus de module qui gère la cam qui se charge au démarrage,  donc plus de problème.
smile
(Je precise que la cam ne fonctionne pas sous XP,  normal que ne fonctionne pas sous Ubuntu )
Donc c'est pas de la faute de UBUNTU. smile

Je vous ferais signe, s'il ya encore d'autres evènements.

Dernière modification par Honorat (Le 06/07/2009, à 17:07)


/ Pour trouver sans chercher il faut \         \ (__)
| avoir longtemps chercher sans      |          (oo)
\ trouver...                                 /    /------\/
--------------------------------------     / |    ||

Hors ligne