#1 Le 26/04/2005, à 15:13
- Splitsch
[abandon]Carte son non détectée...comme d'hab' ;)
Voiola, ben, j'ai passer le cap avec l'ordinateur familiel...et tout ne se passe aps aussi bien qu'avec mon portable...
En effet, aucun lecteur ne parvient à lire mes musique, d'aucun type (mp3, cd, dvd).
J'ai suivis le blog de play à la lettre et rien ne se passe.
Voici ce qu'un sudo lspci donne:
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS 645xx (rev 02)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP)
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 04)
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller0000:00:06.0 Ethernet controller: Linksys NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)
0000:00:14.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
0000:01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440SE AGP 8x] (rev a2)Et voici ce qu'un lsmod donne:
Module Size Used by
nls_utf8 2176 1
nls_cp437 5888 1
vfat 12928 1
fat 37792 1 vfat
isofs 33720 0
udf 77060 1
proc_intf 4100 0
freq_table 4100 0
cpufreq_userspace 4572 0
cpufreq_ondemand 6172 0
cpufreq_powersave 1920 0
video 16260 0
sony_acpi 6280 0
pcc_acpi 11264 0
button 6800 0
battery 10244 0
container 4608 0
ac 4996 0
ipv6 229504 9
sd_mod 16784 2
af_packet 20744 2
usb_storage 64064 1
scsi_mod 119936 2 sd_mod,usb_storage
tulip 46112 0
usblp 12032 0
ehci_hcd 29444 0
ohci_hcd 19848 0
usbcore 107384 5 usb_storage,usblp,ehci_hcd,ohci_hcd
snd_intel8x0 29984 0
snd_ac97_codec 64608 1 snd_intel8x0
snd_pcm_oss 47652 0
snd_mixer_oss 16768 1 snd_pcm_oss
snd_pcm 84872 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 23300 1 snd_pcm
snd 50276 6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 9824 1 snd
snd_page_alloc 9604 2 snd_intel8x0,snd_pcm
i2c_sis96x 5380 0
i2c_core 21264 1 i2c_sis96x
shpchp 86116 0
pci_hotplug 30512 1 shpchp
sis_agp 8068 1
floppy 54864 0
pcspkr 3816 0
rtc 12216 0
md 43856 0
dm_mod 53116 1
evdev 9088 0
capability 5000 0
commoncap 7808 1 capability
tsdev 7488 0
nvidia 3923388 12
agpgart 31784 2 sis_agp,nvidia
psmouse 19336 0
mousedev 11160 1
parport_pc 34372 1
lp 10792 0
parport 33480 2 parport_pc,lp
ide_cd 38532 1
cdrom 36508 1 ide_cd
ext3 120968 1
jbd 54168 1 ext3
ide_generic 1664 0
sis5513 15112 1
ide_disk 18176 3
ide_core 118988 5 usb_storage,ide_cd,ide_generic,sis5513,ide_disk
unix 26164 688
thermal 13576 0
processor 22708 1 thermal
fan 4612 0
fbcon 34048 0
font 8448 1 fbcon
bitblit 5120 1 fbcon
vesafb 6948 0
cfbcopyarea 3968 1 vesafb
cfbimgblt 3072 1 vesafb
cfbfillrect 3584 1 vesafbIl est vrai que je ne comprend pas très bien ce que cela veut dire, mais j'ai lu sur un autre post que cela pourrait etre utile...Est-ce que quelqu'un pourrait m'adier, s'il vous plait!
Merci beaucoup!!
Splitsch
[edit]Voici ce que dmesg donne:
0 (usable)
BIOS-e820: 000000000ff80000 - 0000000010000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65408
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61312 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f81c0
ACPI: RSDT (v001 PTLTD RSDT 0x06040001 LTP 0x00000000) @ 0x0fefc158
ACPI: FADT (v001 FSC D149X 0x06040001 0x000f4240) @ 0x0fefc188
ACPI: MADT (v001 FSC APIC 0x06040001 CSF 0x00000000) @ 0x0fefef92
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040001 LTP 0x00000001) @ 0x0fefefd8
ACPI: DSDT (v001 FSC D149X 0x06040001 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0xf008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/hda2 ro quiet splash vga=792
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 2393.504 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 251548k/261632k available (1436k kernel code, 9348k reserved, 754k data, 224k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 4718.59 BogoMIPS (lpj=2359296)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 0 0000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 0000000 0
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
ACPI: Looking for DSDT in initrd... not found!
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=0 pin2=-1
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like a n initrd
Freeing initrd memory: 4248k freed
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd99d, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050211
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS963 that hid as a SIS503 (compatible=1)
Enabling SiS 96x SMBus.
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: Device [ECP] status [00000008]: functional but not present; setting presen t
ACPI: Device [COM2] status [00000008]: functional but not present; setting prese nt
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas@hp.com
** so I can fix the driver.
Simple Boot Flag at 0x69 set to 0x1
audit: initializing netlink socket (disabled)
audit(1114538659.460:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 8
NET: Registered protocol family 20
Restarting tasks...<6> Strange, kswapd0 not stopped
Strange, kseriod not stopped
done
ACPI wakeup devices:
PCI0 AGPB USB0 USB1 USB2 USB3 FIWI AC97 MC97 KEYB PS2M COM1 COM2
ACPI: (supports S0 S1 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4248KiB [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 224k freed
vesafb: framebuffer at 0xf8000000, mapped to 0xd0880000, using 6144k, total 6553 6k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: protected mode interface info at c000:e710
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
fb0: VESA VGA frame buffer device
Console: switching to colour frame buffer device 128x48
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 16
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: ST380021A, ATA DISK drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 >
Probing IDE interface ide1...
hdc: JLMS XJ-HD166S, ATAPI CD/DVD-ROM drive
hdd: LITE-ON LTR-48246S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
Stopping tasks: ==|
Freeing memory... done (455 pages freed)
Restarting tasks... done
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
Adding 746980k swap on /dev/hda5. Priority:-1 extents:1
EXT3 FS on hda2, internal journal
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (interrupt-driven).
mice: PS/2 mouse device common for all mice
input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
Linux agpgart interface v0.100 (c) Dave Jones
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7174 Tue Mar 22 06:44: 39 PST 2005
ts: Compaq touchscreen protocol output
Capability LSM initialized
device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
cdrom: open failed.
Real Time Clock Driver v1.12
input: PC Speaker
inserting floppy driver for 2.6.10-5-386
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
agpgart: Detected SiS 648 chipset
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 64M @ 0xf0000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: acpi_shpchprm:\_SB_.PCI0 _HPP fail=0x5
shpchp: acpi_pciehprm:\_SB_.PCI0 OSHP fails=0x5
shpchp: acpi_shpchprm: Slot sun(1) at s:b:d:f=0x00:00:0c:ffff
shpchp: acpi_shpchprm:\_SB_.PCI0 _HPP fail=0x5
shpchp: acpi_pciehprm:\_SB_.PCI0 OSHP fails=0x5
shpchp: acpi_shpchprm: Slot sun(2) at s:b:d:f=0x00:00:0e:ffff
shpchp: acpi_shpchprm:\_SB_.PCI0 _HPP fail=0x5
shpchp: acpi_pciehprm:\_SB_.PCI0 OSHP fails=0x5
shpchp: acpi_shpchprm: Slot sun(3) at s:b:d:f=0x00:00:10:ffff
shpchp: acpi_shpchprm:\_SB_.PCI0 _HPP fail=0x5
shpchp: acpi_pciehprm:\_SB_.PCI0 OSHP fails=0x5
shpchp: acpi_shpchprm: Slot sun(4) at s:b:d:f=0x00:00:12:ffff
shpchp: acpi_shpchprm:\_SB_.PCI0 _HPP fail=0x5
shpchp: acpi_pciehprm:\_SB_.PCI0 OSHP fails=0x5
shpchp: acpi_shpchprm: Slot sun(5) at s:b:d:f=0x00:00:14:ffff
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Evaluate _OSC Set fails. Status = 0x0005
pciehp: add_host_bridge: status 5
pciehp: acpi_pciehprm:\_SB_.PCI0 _HPP fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0 OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(1) at s:b:d:f=0x00:00:0c:ffff
pciehp: acpi_pciehprm:\_SB_.PCI0 _HPP fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0 OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(2) at s:b:d:f=0x00:00:0e:ffff
pciehp: acpi_pciehprm:\_SB_.PCI0 _HPP fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0 OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(3) at s:b:d:f=0x00:00:10:ffff
pciehp: acpi_pciehprm:\_SB_.PCI0 _HPP fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0 OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(4) at s:b:d:f=0x00:00:12:ffff
pciehp: acpi_pciehprm:\_SB_.PCI0 _HPP fail=0x5
pciehp: acpi_pciehprm:\_SB_.PCI0 OSHP fails=0x5
pciehp: acpi_pciehprm: Slot sun(5) at s:b:d:f=0x00:00:14:ffff
pciehp: Fails to gain control of native hot-plug
i2c-sis96x version 1.0.0
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
codec_ready: codec is not ready [0x340000]
Intel ICH: probe of 0000:00:02.7 failed with error -5
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
ohci_hcd 0000:00:03.0: irq 20, pci mem 0xf4010000
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:03.1[b] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
ohci_hcd 0000:00:03.1: irq 21, pci mem 0xf4011000
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
ohci_hcd 0000:00:03.2: irq 22, pci mem 0xf4012000
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using ohci_hcd and address 2
ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
ehci_hcd 0000:00:03.3: irq 23, pci mem 0xf4013000
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
Linux Tulip driver version 1.1.13 (May 11, 2002)
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 19
tulip0: MII transceiver #1 config 1000 status 786d advertising 05e1.
eth0: ADMtek Comet rev 17 at 00011800, 00:30:05:2F:D6:14, IRQ 19.
usb 4-1: new high speed USB device using ehci_hcd and address 2
drivers/usb/class/usblp.c: can't set desired altsetting 0 on interface 0
usblp: probe of 1-1:1.0 failed with error -5
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 pr oto 2 vid 0x04A9 pid 0x1088
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usb 1-1: USB disconnect, address 2
NET: Registered protocol family 17
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02f0500(lo)
IPv6 over IPv4 tunneling driver
0000:00:06.0: tulip_stop_rxtx() failed
eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
ACPI: Power Button (FF) [PWRF]
ibm_acpi: ec object not found
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: SiS delay workaround: giving bridge time to recover.
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: SiS delay workaround: giving bridge time to recover.
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (2044 buckets, 16352 max) - 336 bytes per conntrack
eth0: no IPv6 routers present
UDF-fs: No VRS found
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary rootJe ne sais pas ce que cela veut dire...est-ce que quelqu'un pourrait m'aider à resoudre ce problème...ou à interpréter toutes ces lignes?
Merci!
ps: de plus, je soupconne que ce post pourrait m'aider à comprendre ce qu'il se passe, mais je ne comprend pas non plus ce que c'est...:/
http://forum.ubuntu-fr.org/viewtopic.php?id=2693
Voila, encore merci!
Dernière modification par Splitsch (Le 28/04/2005, à 13:55)
Hors ligne
#2 Le 28/04/2005, à 13:54
- Splitsch
Re : [abandon]Carte son non détectée...comme d'hab' ;)
Bonjour ! Bon, ben, j'ai chercher, mais je n'ai rine trouvé concerna t les cartes SigmaTel...et ma carte son persiste à ne pas etre reconnue...en desespoir de cause, je me rabat sur une suse, ou une redhat...pour mon ordi familial, en tout cas !
Merci encore, aplus!
Splitsch
Hors ligne
#3 Le 28/04/2005, à 18:50
- benjou
Re : [abandon]Carte son non détectée...comme d'hab' ;)
Mais dis donc, elle a l'air parfaitement reconnue ta carte.
0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)Je soupconne plutot encore un conflit alsa<->esd.
Va dans system->preferences->multimedia system selector
La choisit dans le default sink ->output soit alsa soit esd et joue le son test...
écrasons l'infâme
Hors ligne
#4 Le 28/04/2005, à 18:54
- Splitsch
Re : [abandon]Carte son non détectée...comme d'hab' ;)
Salut
Merci beaucoup pour ta répsone, je verifierai ca ce soir.
Mais je crois plutot qu'il s'agit d'un problème d'irq, car, meme au démarrage, la Carte mere emet lusieurs bip, et une série de message d'erreur, qui défilent trop vite, apparaissent...
enfin, je verifierai :-)
Merci beaucoup
Splitsch
Hors ligne
#5 Le 28/04/2005, à 19:00
- coffee
Re : [abandon]Carte son non détectée...comme d'hab' ;)
un lspci n'indique rien sur la reconnaissance logiciel, elle indique juste le matériel branché sur les ports PCI.
hum par contre, Splitch j'aurai des questions sur ton matos, c'est quoi le nom de ta carte mère? Tu démmarres comment ton linux (les options dans grub)? Et ne commence pas à flipper, c'est juste des questions qui n'ont pas de rapport avec ton pb.
Nom d'un tupperware habillé en streetware mangeant de la confiture de pouère et qui se dite où est-ce que je suis ouère !
Tiens mon blog
Les blagues sous forme de fausses aides sont susceptible de ban (ex: rm)
Hors ligne
#6 Le 28/04/2005, à 19:07
- Splitsch
Re : [abandon]Carte son non détectée...comme d'hab' ;)
Salut,
ben, en fait, j'ai ubuntu sur mon portable, et les options grub sont juste VGA=792, je crois (je ne me souviens plus du chiffre exact) et aussi j'ai mis les "belle couleurs" pour le menu de grub.
Le nom de ma carte mere de mon portabe, c'est une intel.
Sur mon pc familial, le menue de grub est celui d'origine, sans framebuffer ni les belles couleurs.
Pour la carte mere, aucune idée, je devrais aller voir ca...
pourquoi me demandes-tu cela?Si c'est pour acheter le meme, il doit vraiment etre dépassé aujourd'hui, ce pc a deux an, je crois (aout 2003)...Et c'est un fujitsu-siemens, auquel je n'ai rine rajouter...
Voila, à votre service 
Splitsch
Hors ligne
#7 Le 28/04/2005, à 19:11
- coffee
Re : [abandon]Carte son non détectée...comme d'hab' ;)
Je demande ça parce que j'ai le meme controlleur IDE et il veut pas gerer le DMA donc ça me lourde un peu beaucoup vu que j'ai plein de partitions réparti sur 4 disques donc je voulais savoir si tu avais fait quelque chose car je ne repere aucune erreur de DMA sur dmesg
Surement une merde de ma carte...
Nom d'un tupperware habillé en streetware mangeant de la confiture de pouère et qui se dite où est-ce que je suis ouère !
Tiens mon blog
Les blagues sous forme de fausses aides sont susceptible de ban (ex: rm)
Hors ligne
#8 Le 28/04/2005, à 19:12
- Splitsch
Re : [abandon]Carte son non détectée...comme d'hab' ;)
Oula, non, ca, désolé, je ne sais pas du tout...héhé, je débute en linux, t jusqu'y a une semaine, je ne savais aps ce qu'etait le dma...et maintenant, je sais juste qu'elle doit etre activée
Désolé...
Splitsch
Hors ligne
#9 Le 12/11/2005, à 01:26
- www.rzr.online.fr
Re : [abandon]Carte son non détectée...comme d'hab' ;)
J'ai egalement des probaleme avec ma carte son SiS :
j'ai pris quelques notes a http://rzr.online.fr/q/SiS
# http://identi.ca/rzr # tel mobiles sous linux ca rulez ! (maemo, openmoko, android etc)
# http://rzr.online.fr/q/apt # svp testez mes .deb's
# http://rzr.online.fr/q/unicorn.fr # BeWan USB gris : (marche sur dapper)
# http://go.cur.lv/files# files to be shared or email me
Hors ligne