Ubuntu-fr

fwed

[ATI9600] Blocage ...

Bonjour,

J'ai suivie plusieurs tutos pour installer ma CG ATI 9600 mais je ne m'en sors pas. Je n'utilise pas les drivers fournis par ATI et je suis sous dapper.

Le problème :

J'ai un écran noir et je suis obligé de rebooter à l'arrache puis d'allez en recovery mode ...
J'ai juste a changer Driver "fglrx" par "ati" et faire un init 5 pour que ca reparte ...

Si quelqu'un pouvais m'aider car avec tout les tuto que j'ai lu et toutes les manips, j'ai l'impression de tourner en rond ....

Merci d'avance !

Mon matos :

Athlon XP 3200+
512DDR
ATI 9600
Ubuntu Dapper (kernel 2.6.15-20-k7 & 2.6.15-20)

Ce que j'ai fait dernièrement :

Installation de :

fglrx-control
xorg-driver-fglrx
linux-image-2.6.15-20-k7
linux-image-k7
inux-restricted-modules-k7
linux-restricted-modules-2.6.15-20-k7

Ensuite, dans mon /etc/modules :

agpgart
nvidia-agp
fglrx
lp
psmouse
sbp2
sr_mod

Dans /etc/modules, avec ou sans amd64-agp, ca se charge.

enfin dans mon xorg.conf

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
    FontPath    "/usr/share/X11/fonts/misc"
    FontPath    "/usr/share/X11/fonts/cyrillic"
    FontPath    "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath    "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath    "/usr/share/X11/fonts/Type1"
    FontPath    "/usr/share/X11/fonts/100dpi"
    FontPath    "/usr/share/X11/fonts/75dpi"
    # path to defoma fonts
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load    "i2c"
    Load    "bitmap"
    Load    "ddc"
    Load    "dri"
#    Load    "extmod"
    SubSection "extmod"
        Option    "omit xfree86-dga"
    EndSubSection
    Load    "freetype"
    Load    "glx"
    Load    "int10"
    Load    "type1"
    Load    "vbe"
EndSection

Section "InputDevice"
    Identifier    "Generic Keyboard"
    Driver        "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules"    "xorg"
    Option        "XkbModel"    "pc105"
    Option        "XkbLayout"    "fr"
    Option        "XkbVariant"    "latin9"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
    Option        "CorePointer"
    Option        "Device"        "/dev/input/mice"
    Option        "Protocol"        "ExplorerPS/2"
    Option        "ZAxisMapping"        "4 5"
    Option        "Emulate3Buttons"    "true"
EndSection

Section "Device"
    Identifier    "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
    Driver        "fglrx"
    Option "UseInternalAGPGART" "no"
    BusID        "PCI:1:0:0"
EndSection

Section "Monitor"
    Identifier    "CPD-210EST"
    Option        "DPMS"
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Device        "ATI Technologies, Inc. RV350 AP [Radeon 9600]"
    Monitor        "CPD-210EST"
    DefaultDepth    24
    SubSection "Display"
        Depth        1
        Modes        "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        4
        Modes        "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        8
        Modes        "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        15
        Modes        "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        16
        Modes        "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
    SubSection "Display"
        Depth        24
        Modes        "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480"
    EndSubSection
EndSection

Section "ServerLayout"
    Identifier    "Default Layout"
    Screen        "Default Screen"
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "DRI"
    Mode    0666
EndSection

J'ai aussi essayé avec "UseInternalAGPGART" à yes.

Lors d'un lsmod | grep agp, j'ai bien :

nvidia_agp              9116  0
amd64_agp              13252  0
agpgart                37072  3 fglrx,nvidia_agp,amd64_agp

Lors d'un dmesg | grep fglrx :

[4294695.752000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[4294695.754000] [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[4294695.755000] [fglrx] module loaded - fglrx 8.23.7 [Mar  6 2006] on minor 0

Aelor

Re : [ATI9600] Blocage ...

Mets fglrx en premier dans /etc/modules

Ca a corrigé le problème chez certaines personnes.

---

Ex Roane.

Ruby, le langage qui tue : http://rubyfr.org

fwed

Re : [ATI9600] Blocage ...

J'ai mis fglrx en premier mais cela ne change pas le problème.

J'ai ensuite mis :

fglrx
amd64-agp
nvidia-agp

et toujours un beau écran noir au lancement ...

Voici les logs de Xorg.0.log :

drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xe0bfa000
(II) fglrx(0): [drm] mapped SAREA 0xe0bfa000 to 0xb7651000
(II) fglrx(0): [drm] framebuffer handle = 0xd0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.23.7
(II) fglrx(0):     Date: Mar  6 2006
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.15-20-k7
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0xff4f0000

Par contre je viens de voir un message que j'avais pas lors d'un "dmesg | grep fglrx" (avec "UseInternalAGPGART" "yes")  :

[4294697.260000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[4294697.263000] [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[4294697.263000] [fglrx] module loaded - fglrx 8.23.7 [Mar  6 2006] on minor 0
[4294705.007000] [fglrx] Failed to load fglrx_agp module
[4294705.007000] [fglrx] Error code  256
[4294705.007000] [fglrx] Failed to load ATI module agpgart
[4294705.007000] [fglrx] Fallback to internal agpgart module
[4294705.008000] Modules linked in: cpufreq_userspace cpufreq_stats freq_table cpufreq_powersave cpufreq_ondemand cpufreq_conservative video tc1100_wmi sony_acpi pcc_acpi hotkey dev_acpi container button acpi_sbs battery ac i2c_acpi_ec dm_mod md_mod hci_usb bluetooth sr_mod sbp2 parport_pc lp parport nvidia_agp fglrx snd_cmipci snd_pcm_oss snd_mixer_oss ipv6 floppy snd_pcm snd_page_alloc snd_opl3_lib snd_timer snd_hwdep snd_mpu401 snd_mpu401_uart snd_rawmidi snd_seq_device af_packet analog snd gameport soundcore pcspkr ohci1394 ieee1394 psmouse rtc i2c_nforce2 i2c_core serio_raw shpchp amd64_agp agpgart pci_hotplug joydev evdev tsdev ext3 jbd ide_generic usbhid forcedeth ehci_hcd ohci_hcd usbcore ide_cd cdrom ide_disk generic amd74xx sata_nv libata scsi_mod thermal processor fan capability commoncap vga16fb vgastate fbcon tileblit font bitblit softcursor
[4294705.008000]  [<e0c0ce59>] agp_generic_free_gatt_table+0x79/0xf0 [fglrx]
[4294705.008000]  [<e0c14f36>] agp_backend_initialize+0x1a6/0x220 [fglrx]
[4294705.008000]  [<e0c15071>] __fgl_agp_init+0x31/0x90 [fglrx]
[4294705.008000]  [<e0c18fdb>] __ke_firegl_agpgart_available+0x1b/0x60 [fglrx]
[4294705.008000]  [<e0c22804>] drm_agp_init+0x64/0xa0 [fglrx]
[4294705.008000]  [<e0c2313d>] _firegl_agp_acquire+0x7d/0x380 [fglrx]
[4294705.008000]  [<e0c22e27>] firegl_agp_acquire+0x77/0xa0 [fglrx]
[4294705.008000]  [<e0c22db0>] firegl_agp_acquire+0x0/0xa0 [fglrx]
[4294705.008000]  [<e0c23c9e>] firegl_ioctl+0x1ae/0x230 [fglrx]
[4294705.009000]  [<e0c19cd6>] .text.lock.firegl_public+0x8a/0xb4 [fglrx]
[4294705.009000]  [<e0c1fb75>] firegl_find_map+0xf5/0x100 [fglrx]
[4294705.009000]  [<e0c20fef>] drm_vm_close+0x13f/0x1b0 [fglrx]
[4294705.009000]  [<e0c0ce59>] agp_generic_free_gatt_table+0x79/0xf0 [fglrx]
[4294705.009000]  [<e0c14f36>] agp_backend_initialize+0x1a6/0x220 [fglrx]
[4294705.010000]  [<e0c15071>] __fgl_agp_init+0x31/0x90 [fglrx]
[4294705.010000]  [<e0c18fdb>] __ke_firegl_agpgart_available+0x1b/0x60 [fglrx]
[4294705.010000]  [<e0c22804>] drm_agp_init+0x64/0xa0 [fglrx]
[4294705.010000]  [<e0c2313d>] _firegl_agp_acquire+0x7d/0x380 [fglrx]
[4294705.010000]  [<e0c22e27>] firegl_agp_acquire+0x77/0xa0 [fglrx]
[4294705.010000]  [<e0c22db0>] firegl_agp_acquire+0x0/0xa0 [fglrx]
[4294705.010000]  [<e0c23c9e>] firegl_ioctl+0x1ae/0x230 [fglrx]

Avec "UseInternalAGPGART" "no" :

$ dmesg | grep fglrx

[4294698.457000] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[4294698.458000] [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[4294698.458000] [fglrx] module loaded - fglrx 8.23.7 [Mar  6 2006] on minor 0
[4294706.060000] [fglrx:firegl_unlock] *ERROR* Process 4440 using kernel context 0

$ tail -f /var/log/Xorg.0.log :

drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xe0d2b000
(II) fglrx(0): [drm] mapped SAREA 0xe0d2b000 to 0xb766c000
(II) fglrx(0): [drm] framebuffer handle = 0xd0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.23.7
(II) fglrx(0):     Date: Mar  6 2006
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.15-20-k7
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0xff4f0000
(EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV"
(EE) fglrx(0): cannot init AGP
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xe0d2b000 at 0xb766c000
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x08000000
(II) fglrx(0): FBMM initialized for area (0,0)-(1024,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1024,768) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor (scanline 768)
(II) fglrx(0): Largest offscreen area available: 1024 x 7419
(**) Option "dpms"
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        Solid Horizontal and Vertical Lines
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                32 128x128 slots
                32 256x256 slots
                16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
error opening security policy file /etc/X11/xserver/SecurityPolicy

j'ai vu un post pour mettre un lien avec des anciennes lib DRI, je vais essayer ...

Dernière modification par fwed (Le 09/04/2006, à 12:59)

fwed

Re : [ATI9600] Blocage ...

j'ai vu un post pour mettre un lien avec des anciennes lib DRI, je vais essayer ...

finalement c'est pour la version 64 ... donc retour a 0