#1 Le 28/06/2009, à 17:57
- fpouget
Démarrage Kubuntu 9.04 stoppe après Setting Advanced Power
Bonjour,
J'écris depuis une session windows live
Machine DELL 32Bits avec Vista installé. Avec un utilitaire Windows j'ai réduit la partition de Windows (Csmile puis j'ai installé Kubuntu dessus pour me retrouver en Multiboot.
Vista fonctionne nickel
par contre Kubuntu démarre et stoppe juste après la ligne
"Seting Advanced Power Management level to 0xfe (254) [OK]"
J'ai attendu mais cela reste figé. Accès OK avec CTRL + ALT + F1 sauf que je ne sais pas quoi faire...
J'ai tenté les différents recovery modes mais rien de neuf non plus.
Des idées ?
Le dmesg en question :
[ 0.000000] BIOS EBDA/lowmem at: 0009b000/0009b000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfe53c00 (usable)
[ 0.000000] BIOS-e820: 00000000bfe53c00 - 00000000bfe55c00 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfe55c00 - 00000000bfe57c00 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfe57c00 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.5 present.
[ 0.000000] last_pfn = 0xbfe53 max_arch_pfn = 0x100000
[ 0.000000] Scanning 2 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable)
[ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000008e000 (usable)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bfe53c00 (usable)
[ 0.000000] modified: 00000000bfe53c00 - 00000000bfe55c00 (ACPI NVS)
[ 0.000000] modified: 00000000bfe55c00 - 00000000bfe57c00 (ACPI data)
[ 0.000000] modified: 00000000bfe57c00 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fed00400 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000feda0000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] modified: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378c2000 - 37fef7c5
[ 0.000000] Allocated new RAMDISK: 00881000 - 00fae7c5
[ 0.000000] Move RAMDISK from 00000000378c2000 - 0000000037fef7c4 to 00881000 - 00fae7c4
[ 0.000000] ACPI: RSDP 000FEBE0, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT 000FD099, 0064 (r1 DELL B9K 15 ASL 61)
[ 0.000000] ACPI: FACP 000FD1B9, 00F4 (r3 DELL B9K 15 ASL 61)
[ 0.000000] ACPI: DSDT FFF5E78F, 2D19 (r1 DELL dt_ex 1000 INTL 20050624)
[ 0.000000] ACPI: FACS BFE53C00, 0040
[ 0.000000] ACPI: SSDT FFF615C9, 00AC (r1 DELL st_ex 1000 INTL 20050624)
[ 0.000000] ACPI: APIC 000FD2AD, 0092 (r1 DELL B9K 15 ASL 61)
[ 0.000000] ACPI: BOOT 000FD33F, 0028 (r1 DELL B9K 15 ASL 61)
[ 0.000000] ACPI: MCFG 000FD367, 003E (r1 DELL B9K 15 ASL 61)
[ 0.000000] ACPI: HPET 000FD3A5, 0038 (r1 DELL B9K 15 ASL 61)
[ 0.000000] ACPI: DUMY BFE55C00, 0024 (r1 DELL B9K 15 ASL 61)
[ 0.000000] ACPI: SLIC 000FD3DD, 0176 (r1 DELL B9K 15 ASL 61)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2186MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c]
[ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000]
[ 0.000000] #5 [000009b000 - 0000100000] BIOS reserved ==> [000009b000 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000881000 - 0000fae7c5] NEW RAMDISK ==> [0000881000 - 0000fae7c5]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00fe710] 000fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x000bfe53
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x00000007
[ 0.000000] 0: 0x00000010 -> 0x0000008e
[ 0.000000] 0: 0x00000100 -> 0x000bfe53
[ 0.000000] On node 0 totalpages: 785876
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3937 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4373 pages used for memmap
[ 0.000000] HighMem zone: 555328 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 000000000008e000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 8, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779735
[ 0.000000] Kernel command line: root=UUID=81e3a8ab-8ba4-431e-9418-bfb8fc4365d5 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2394.079 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 15720060 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 3086364k/3144012k available (4126k kernel code, 56208k reserved, 2208k data, 532k init, 2238804k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.15 BogoMIPS (lpj=9576316)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.018003] ACPI: Core revision 20080926
[ 0.066461] ACPI: Checking initramfs for custom DSDT
[ 0.397012] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.437048] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.440001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4787.91 BogoMIPS (lpj=9575828)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.524521] CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.524533] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.528092] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.004000] Initializing CPU#2
[ 0.004000] Calibrating delay using timer specific routine.. 4787.93 BogoMIPS (lpj=9575864)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 2
[ 0.616586] CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.616598] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.620081] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.004000] Initializing CPU#3
[ 0.004000] Calibrating delay using timer specific routine.. 4787.93 BogoMIPS (lpj=9575868)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 3
[ 0.708547] CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.708561] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.712021] Brought up 4 CPUs
[ 0.712024] Total of 4 processors activated (19151.93 BogoMIPS).
[ 0.712076] CPU0 attaching sched-domain:
[ 0.712078] domain 0: span 0-1 level MC
[ 0.712079] groups: 0 1
[ 0.712083] domain 1: span 0-3 level CPU
[ 0.712085] groups: 0-1 2-3
[ 0.712093] CPU1 attaching sched-domain:
[ 0.712094] domain 0: span 0-1 level MC
[ 0.712096] groups: 1 0
[ 0.712102] domain 1: span 0-3 level CPU
[ 0.712104] groups: 0-1 2-3
[ 0.712107] CPU2 attaching sched-domain:
[ 0.712108] domain 0: span 2-3 level MC
[ 0.712110] groups: 2 3
[ 0.712113] domain 1: span 0-3 level CPU
[ 0.712114] groups: 2-3 0-1
[ 0.712118] CPU3 attaching sched-domain:
[ 0.712120] domain 0: span 2-3 level MC
[ 0.712122] groups: 3 2
[ 0.712124] domain 1: span 0-3 level CPU
[ 0.712126] groups: 2-3 0-1
[ 0.712228] net_namespace: 776 bytes
[ 0.712228] Booting paravirtualized kernel on bare hardware
[ 0.712271] Time: 17:37:19 Date: 06/28/09
[ 0.712271] regulator: core version 0.5
[ 0.712271] NET: Registered protocol family 16
[ 0.712271] EISA bus registered
[ 0.712271] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.712271] ACPI: bus type pci registered
[ 0.712271] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.712271] PCI: MCFG area at e0000000 reserved in E820
[ 0.712271] PCI: Using MMCONFIG for extended config space
[ 0.712271] PCI: Using configuration type 1 for base access
[ 0.712906] ACPI: EC: Look up EC in DSDT
[ 0.759741] ACPI: BIOS _OSI(Linux) query ignored
[ 0.786183] ACPI: Interpreter enabled
[ 0.786192] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.786209] ACPI: Using IOAPIC for interrupt routing
[ 0.873295] ACPI: No dock devices found.
[ 0.873302] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.873374] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.873377] pci 0000:00:01.0: PME# disabled
[ 0.873409] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.873411] pci 0000:00:06.0: PME# disabled
[ 0.873464] pci 0000:00:19.0: reg 10 32bit mmio: [0xfebe0000-0xfebfffff]
[ 0.873469] pci 0000:00:19.0: reg 14 32bit mmio: [0xfebdb000-0xfebdbfff]
[ 0.873475] pci 0000:00:19.0: reg 18 io port: [0xeca0-0xecbf]
[ 0.873496] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.873500] pci 0000:00:19.0: PME# disabled
[ 0.873544] pci 0000:00:1a.0: reg 20 io port: [0xff20-0xff3f]
[ 0.873599] pci 0000:00:1a.1: reg 20 io port: [0xff00-0xff1f]
[ 0.873655] pci 0000:00:1a.2: reg 20 io port: [0xecc0-0xecdf]
[ 0.873713] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfebdac00-0xfebdafff]
[ 0.873747] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.873751] pci 0000:00:1a.7: PME# disabled
[ 0.873788] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfebdc000-0xfebdffff]
[ 0.873813] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.873816] pci 0000:00:1b.0: PME# disabled
[ 0.873856] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.873859] pci 0000:00:1c.0: PME# disabled
[ 0.873900] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.873904] pci 0000:00:1c.1: PME# disabled
[ 0.873945] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.873948] pci 0000:00:1c.2: PME# disabled
[ 0.873992] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.873995] pci 0000:00:1c.3: PME# disabled
[ 0.874044] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f]
[ 0.874099] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
[ 0.874155] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
[ 0.874213] pci 0000:00:1d.7: reg 10 32bit mmio: [0xff980800-0xff980bff]
[ 0.874247] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.874251] pci 0000:00:1d.7: PME# disabled
[ 0.874353] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.874356] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[ 0.874402] pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07]
[ 0.874407] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13]
[ 0.874412] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27]
[ 0.874417] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33]
[ 0.874422] pci 0000:00:1f.2: reg 20 io port: [0xfec0-0xfedf]
[ 0.874427] pci 0000:00:1f.2: reg 24 32bit mmio: [0xff970000-0xff9707ff]
[ 0.874439] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.874442] pci 0000:00:1f.2: PME# disabled
[ 0.874467] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfebdab00-0xfebdabff]
[ 0.874479] pci 0000:00:1f.3: reg 20 io port: [0xece0-0xecff]
[ 0.874519] pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.874527] pci 0000:01:00.0: reg 18 64bit mmio: [0xfe9f0000-0xfe9fffff]
[ 0.874532] pci 0000:01:00.0: reg 20 io port: [0xdc00-0xdcff]
[ 0.874540] pci 0000:01:00.0: reg 30 32bit mmio: [0xfea00000-0xfea1ffff]
[ 0.874547] pci 0000:01:00.0: supports D1 D2
[ 0.874576] pci 0000:01:00.1: reg 10 64bit mmio: [0xfe9ec000-0xfe9effff]
[ 0.874599] pci 0000:01:00.1: supports D1 D2
[ 0.874639] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[ 0.874641] pci 0000:00:01.0: bridge 32bit mmio: [0xfe900000-0xfeafffff]
[ 0.874645] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.874715] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
[ 0.874755] pci 0000:00:1c.1: bridge 32bit mmio: [0xfe700000-0xfe7fffff]
[ 0.874877] pci 0000:07:0a.0: reg 10 32bit mmio: [0xfe6fb800-0xfe6fbfff]
[ 0.874883] pci 0000:07:0a.0: reg 14 32bit mmio: [0xfe6fc000-0xfe6fffff]
[ 0.874915] pci 0000:07:0a.0: supports D1 D2
[ 0.874917] pci 0000:07:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.874920] pci 0000:07:0a.0: PME# disabled
[ 0.874961] pci 0000:00:1e.0: transparent bridge
[ 0.874966] pci 0000:00:1e.0: bridge 32bit mmio: [0xfe600000-0xfe6fffff]
[ 0.874993] bus 00 -> node 0
[ 0.874998] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.875755] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
[ 0.876397] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
[ 0.876934] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
[ 0.877402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 2.194400] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 2.195167] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 2.195913] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 9 10 11 12 15)
[ 2.196670] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 2.197447] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 2.198192] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 2.198956] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 2.199702] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 2.200089] ACPI: WMI: Mapper loaded
[ 2.200124] SCSI subsystem initialized
[ 2.200127] libata version 3.00 loaded.
[ 2.200127] usbcore: registered new interface driver usbfs
[ 2.200127] usbcore: registered new interface driver hub
[ 2.200127] usbcore: registered new device driver usb
[ 2.200127] PCI: Using ACPI for IRQ routing
[ 2.208015] Bluetooth: Core ver 2.13
[ 2.208030] NET: Registered protocol family 31
[ 2.208030] Bluetooth: HCI device and connection manager initialized
[ 2.208030] Bluetooth: HCI socket layer initialized
[ 2.208030] NET: Registered protocol family 8
[ 2.208030] NET: Registered protocol family 20
[ 2.208043] NetLabel: Initializing
[ 2.208045] NetLabel: domain hash size = 128
[ 2.208047] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.208061] NetLabel: unlabeled traffic allowed by default
[ 2.208079] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 2.208086] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 2.216067] AppArmor: AppArmor Filesystem Enabled
[ 2.220012] Switched to high resolution mode on CPU 0
[ 2.220576] Switched to high resolution mode on CPU 1
[ 2.220768] Switched to high resolution mode on CPU 3
[ 2.220824] Switched to high resolution mode on CPU 2
[ 2.224034] pnp: PnP ACPI init
[ 2.224043] ACPI: bus type pnp registered
[ 2.234203] pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 2.234205] pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 2.254195] pnp: PnP ACPI: found 7 devices
[ 2.254197] ACPI: ACPI bus type pnp unregistered
[ 2.254200] PnPBIOS: Disabled by ACPI PNP
[ 2.254207] system 00:01: ioport range 0xc00-0xc7f has been reserved
[ 2.288860] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 2.288863] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 2.288866] pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff
[ 2.288869] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 2.288872] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02
[ 2.288874] pci 0000:00:06.0: IO window: disabled
[ 2.288877] pci 0000:00:06.0: MEM window: disabled
[ 2.288879] pci 0000:00:06.0: PREFETCH window: disabled
[ 2.288883] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 2.288884] pci 0000:00:1c.0: IO window: disabled
[ 2.288888] pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
[ 2.288891] pci 0000:00:1c.0: PREFETCH window: disabled
[ 2.288896] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 2.288898] pci 0000:00:1c.1: IO window: disabled
[ 2.288902] pci 0000:00:1c.1: MEM window: 0xfe700000-0xfe7fffff
[ 2.288905] pci 0000:00:1c.1: PREFETCH window: disabled
[ 2.288910] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:05
[ 2.288912] pci 0000:00:1c.2: IO window: disabled
[ 2.288916] pci 0000:00:1c.2: MEM window: disabled
[ 2.288919] pci 0000:00:1c.2: PREFETCH window: disabled
[ 2.288924] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
[ 2.288925] pci 0000:00:1c.3: IO window: disabled
[ 2.288929] pci 0000:00:1c.3: MEM window: disabled
[ 2.288932] pci 0000:00:1c.3: PREFETCH window: disabled
[ 2.288937] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:07
[ 2.288939] pci 0000:00:1e.0: IO window: disabled
[ 2.288943] pci 0000:00:1e.0: MEM window: 0xfe600000-0xfe6fffff
[ 2.288946] pci 0000:00:1e.0: PREFETCH window: disabled
[ 2.288957] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.288960] pci 0000:00:01.0: setting latency timer to 64
[ 2.288964] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.288967] pci 0000:00:06.0: setting latency timer to 64
[ 2.288972] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.288976] pci 0000:00:1c.0: setting latency timer to 64
[ 2.288982] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.288985] pci 0000:00:1c.1: setting latency timer to 64
[ 2.288992] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.288995] pci 0000:00:1c.2: setting latency timer to 64
[ 2.289001] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.289005] pci 0000:00:1c.3: setting latency timer to 64
[ 2.289010] pci 0000:00:1e.0: setting latency timer to 64
[ 2.289013] bus: 00 index 0 io port: [0x00-0xffff]
[ 2.289015] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 2.289017] bus: 01 index 0 io port: [0xd000-0xdfff]
[ 2.289018] bus: 01 index 1 mmio: [0xfe900000-0xfeafffff]
[ 2.289020] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
[ 2.289021] bus: 01 index 3 mmio: [0x0-0x0]
[ 2.289023] bus: 02 index 0 mmio: [0x0-0x0]
[ 2.289024] bus: 02 index 1 mmio: [0x0-0x0]
[ 2.289026] bus: 02 index 2 mmio: [0x0-0x0]
[ 2.289027] bus: 02 index 3 mmio: [0x0-0x0]
[ 2.289028] bus: 03 index 0 mmio: [0x0-0x0]
[ 2.289030] bus: 03 index 1 mmio: [0xfe800000-0xfe8fffff]
[ 2.289031] bus: 03 index 2 mmio: [0x0-0x0]
[ 2.289033] bus: 03 index 3 mmio: [0x0-0x0]
[ 2.289034] bus: 04 index 0 mmio: [0x0-0x0]
[ 2.289036] bus: 04 index 1 mmio: [0xfe700000-0xfe7fffff]
[ 2.289037] bus: 04 index 2 mmio: [0x0-0x0]
[ 2.289039] bus: 04 index 3 mmio: [0x0-0x0]
[ 2.289040] bus: 05 index 0 mmio: [0x0-0x0]
[ 2.289042] bus: 05 index 1 mmio: [0x0-0x0]
[ 2.289043] bus: 05 index 2 mmio: [0x0-0x0]
[ 2.289044] bus: 05 index 3 mmio: [0x0-0x0]
[ 2.289046] bus: 06 index 0 mmio: [0x0-0x0]
[ 2.289047] bus: 06 index 1 mmio: [0x0-0x0]
[ 2.289048] bus: 06 index 2 mmio: [0x0-0x0]
[ 2.289050] bus: 06 index 3 mmio: [0x0-0x0]
[ 2.289051] bus: 07 index 0 mmio: [0x0-0x0]
[ 2.289053] bus: 07 index 1 mmio: [0xfe600000-0xfe6fffff]
[ 2.289054] bus: 07 index 2 mmio: [0x0-0x0]
[ 2.289056] bus: 07 index 3 io port: [0x00-0xffff]
[ 2.289057] bus: 07 index 4 mmio: [0x000000-0xffffffff]
[ 2.289063] NET: Registered protocol family 2
[ 2.304076] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 2.304286] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 2.304527] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 2.304650] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.304652] TCP reno registered
[ 2.308113] NET: Registered protocol family 1
[ 2.308223] checking if image is initramfs... it is
[ 2.806243] Freeing initrd memory: 7349k freed
[ 2.806273] Simple Boot Flag at 0x7a set to 0x1
[ 2.806561] cpufreq: No nForce2 chipset.
[ 2.806663] audit: initializing netlink socket (disabled)
[ 2.806677] type=2000 audit(1246210640.804:1): initialized
[ 2.812635] highmem bounce pool size: 64 pages
[ 2.812638] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.813769] VFS: Disk quotas dquot_6.5.1
[ 2.813834] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.814397] fuse init (API version 7.10)
[ 2.814492] msgmni has been set to 1671
[ 2.814697] alg: No test for stdrng (krng)
[ 2.814712] io scheduler noop registered
[ 2.814714] io scheduler anticipatory registered
[ 2.814717] io scheduler deadline registered
[ 2.814732] io scheduler cfq registered (default)
[ 2.814871] pci 0000:01:00.0: Boot video device
[ 2.875670] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 2.875697] pcieport-driver 0000:00:01.0: found MSI capability
[ 2.875716] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 2.875723] pci_express 0000:00:01.0:pcie00: allocate port service
[ 2.875734] pci_express 0000:00:01.0:pcie03: allocate port service
[ 2.875771] pcieport-driver 0000:00:06.0: setting latency timer to 64
[ 2.875797] pcieport-driver 0000:00:06.0: found MSI capability
[ 2.875813] pcieport-driver 0000:00:06.0: irq 2302 for MSI/MSI-X
[ 2.875820] pci_express 0000:00:06.0:pcie00: allocate port service
[ 2.875830] pci_express 0000:00:06.0:pcie03: allocate port service
[ 2.875867] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 2.875896] pcieport-driver 0000:00:1c.0: found MSI capability
[ 2.875916] pcieport-driver 0000:00:1c.0: irq 2301 for MSI/MSI-X
[ 2.875925] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 2.875935] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 2.875944] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 2.875991] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 2.876020] pcieport-driver 0000:00:1c.1: found MSI capability
[ 2.876045] pcieport-driver 0000:00:1c.1: irq 2300 for MSI/MSI-X
[ 2.876054] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 2.876064] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 2.876073] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 2.876124] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 2.876152] pcieport-driver 0000:00:1c.2: found MSI capability
[ 2.876172] pcieport-driver 0000:00:1c.2: irq 2299 for MSI/MSI-X
[ 2.876182] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 2.876192] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 2.876201] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 2.876247] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 2.876280] pcieport-driver 0000:00:1c.3: found MSI capability
[ 2.876300] pcieport-driver 0000:00:1c.3: irq 2298 for MSI/MSI-X
[ 2.876310] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 2.876319] pci_express 0000:00:1c.3:pcie02: allocate port service
[ 2.876333] pci_express 0000:00:1c.3:pcie03: allocate port service
[ 2.876387] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.906610] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.906708] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.906710] ACPI: Power Button (FF) [PWRF]
[ 2.906743] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.906750] ACPI: Power Button (CM) [VBTN]
[ 2.907397] processor ACPI_CPU:00: registered as cooling_device0
[ 2.907426] processor ACPI_CPU:01: registered as cooling_device1
[ 2.907456] processor ACPI_CPU:02: registered as cooling_device2
[ 2.907485] processor ACPI_CPU:03: registered as cooling_device3
[ 3.033770] isapnp: Scanning for PnP cards...
[ 3.386527] isapnp: No Plug & Play device found
[ 3.393087] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 3.393854] brd: module loaded
[ 3.394101] loop: module loaded
[ 3.394148] Fixed MDIO Bus: probed
[ 3.394152] PPP generic driver version 2.4.2
[ 3.394194] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 3.394215] Driver 'sd' needs updating - please use bus_type methods
[ 3.394222] Driver 'sr' needs updating - please use bus_type methods
[ 3.394254] ahci 0000:00:1f.2: version 3.0
[ 3.394264] ahci 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 3.394296] ahci 0000:00:1f.2: irq 2297 for MSI/MSI-X
[ 3.394357] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
[ 3.394360] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ems
[ 3.394363] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.394606] scsi0 : ahci
[ 3.394700] scsi1 : ahci
[ 3.394796] scsi2 : ahci
[ 3.394867] scsi3 : ahci
[ 3.394940] scsi4 : ahci
[ 3.395013] scsi5 : ahci
[ 3.395057] ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 2297
[ 3.395061] ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 2297
[ 3.395064] ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 2297
[ 3.395067] ata4: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970280 irq 2297
[ 3.395070] ata5: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970300 irq 2297
[ 3.395073] ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 2297
[ 3.876020] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.882349] ata1.00: ATA-7: SAMSUNG HD642JJ, 1AA01113, max UDMA7
[ 3.882352] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.888789] ata1.00: configured for UDMA/133
[ 4.388013] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.388209] ata2.00: ATAPI: PLDS DVD+/-RW DH-16A6S, YD11, max UDMA/100
[ 4.388881] ata2.00: configured for UDMA/100
[ 4.724023] ata3: SATA link down (SStatus 4 SControl 300)
[ 5.060023] ata4: SATA link down (SStatus 4 SControl 300)
[ 5.396022] ata5: SATA link down (SStatus 4 SControl 300)
[ 5.732022] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.748122] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD642JJ 1AA0 PQ: 0 ANSI: 5
[ 5.748217] sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors: (640 GB/596 GiB)
[ 5.748230] sd 0:0:0:0: [sda] Write Protect is off
[ 5.748231] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.748251] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.748299] sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors: (640 GB/596 GiB)
[ 5.748310] sd 0:0:0:0: [sda] Write Protect is off
[ 5.748312] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.748331] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.748334] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 5.805618] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.805670] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.806669] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DH-16A6S YD11 PQ: 0 ANSI: 5
[ 5.811879] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.811883] Uniform CD-ROM driver Revision: 3.20
[ 5.811994] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.812049] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.812605] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.812620] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 5.812630] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 5.812632] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 5.812672] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 5.816558] ehci_hcd 0000:00:1a.7: debug port 1
[ 5.816563] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 5.816573] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfebdac00
[ 5.832015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 5.832086] usb usb1: configuration #1 chosen from 1 choice
[ 5.832118] hub 1-0:1.0: USB hub found
[ 5.832126] hub 1-0:1.0: 6 ports detected
[ 5.832222] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.832230] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.832232] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.832263] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 5.836143] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.836148] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 5.836158] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980800
[ 5.848015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.848076] usb usb2: configuration #1 chosen from 1 choice
[ 5.848105] hub 2-0:1.0: USB hub found
[ 5.848112] hub 2-0:1.0: 6 ports detected
[ 5.848206] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.848219] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.848234] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.848239] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5.848242] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 5.848272] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 5.848298] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
[ 5.848350] usb usb3: configuration #1 chosen from 1 choice
[ 5.848371] hub 3-0:1.0: USB hub found
[ 5.848376] hub 3-0:1.0: 2 ports detected
[ 5.848435] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.848440] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 5.848442] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 5.848476] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 5.848501] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
[ 5.848574] usb usb4: configuration #1 chosen from 1 choice
[ 5.848593] hub 4-0:1.0: USB hub found
[ 5.848599] hub 4-0:1.0: 2 ports detected
[ 5.848662] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 5.848666] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 5.848669] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 5.848701] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 5.848720] uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000ecc0
[ 5.848772] usb usb5: configuration #1 chosen from 1 choice
[ 5.848790] hub 5-0:1.0: USB hub found
[ 5.848795] hub 5-0:1.0: 2 ports detected
[ 5.848858] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.848863] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.848866] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.848896] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 5.848915] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
[ 5.848967] usb usb6: configuration #1 chosen from 1 choice
[ 5.848988] hub 6-0:1.0: USB hub found
[ 5.848992] hub 6-0:1.0: 2 ports detected
[ 5.849053] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.849058] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.849060] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.849094] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 5.849113] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
[ 5.849171] usb usb7: configuration #1 chosen from 1 choice
[ 5.849191] hub 7-0:1.0: USB hub found
[ 5.849195] hub 7-0:1.0: 2 ports detected
[ 5.849257] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.849262] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.849264] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.849295] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 5.849320] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 5.849373] usb usb8: configuration #1 chosen from 1 choice
[ 5.849391] hub 8-0:1.0: USB hub found
[ 5.849398] hub 8-0:1.0: 2 ports detected
[ 5.849496] usbcore: registered new interface driver libusual
[ 5.849520] usbcore: registered new interface driver usbserial
[ 5.849528] USB Serial support registered for generic
[ 5.849541] usbcore: registered new interface driver usbserial_generic
[ 5.849543] usbserial: USB Serial Driver core
[ 5.849576] PNP: No PS/2 controller found. Probing ports directly.
[ 5.852078] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.852082] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.856590] mice: PS/2 mouse device common for all mice
[ 5.868577] rtc_cmos 00:05: RTC can wake from S4
[ 5.868611] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 5.868635] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
[ 5.868698] device-mapper: uevent: version 1.0.3
[ 5.868798] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 5.868968] device-mapper: multipath: version 1.0.5 loaded
[ 5.868971] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 5.869064] EISA: Probing bus 0 at eisa.0
[ 5.869091] EISA: Detected 0 cards.
[ 5.869247] cpuidle: using governor ladder
[ 5.869249] cpuidle: using governor menu
[ 5.869665] TCP cubic registered
[ 5.869740] NET: Registered protocol family 10
[ 5.870091] lo: Disabled Privacy Extensions
[ 5.870346] NET: Registered protocol family 17
[ 5.870358] Bluetooth: L2CAP ver 2.11
[ 5.870360] Bluetooth: L2CAP socket layer initialized
[ 5.870362] Bluetooth: SCO (Voice Link) ver 0.6
[ 5.870363] Bluetooth: SCO socket layer initialized
[ 5.870409] Bluetooth: RFCOMM socket layer initialized
[ 5.870415] Bluetooth: RFCOMM TTY layer initialized
[ 5.870417] Bluetooth: RFCOMM ver 1.10
[ 5.870507] Using IPI No-Shortcut mode
[ 5.870578] registered taskstats version 1
[ 5.870737] Magic number: 13:488:644
[ 5.870802] rtc_cmos 00:05: setting system clock to 2009-06-28 17:37:24 UTC (1246210644)
[ 5.870804] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 5.870806] EDD information not available.
[ 5.870977] Freeing unused kernel memory: 532k freed
[ 5.871084] Write protecting the kernel text: 4128k
[ 5.871121] Write protecting the kernel read-only data: 1532k
[ 6.006410] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 6.006413] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 6.006460] e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 6.006470] e1000e 0000:00:19.0: setting latency timer to 64
[ 6.006586] e1000e 0000:00:19.0: irq 2296 for MSI/MSI-X
[ 6.033930] ohci1394 0000:07:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 6.083645] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fe6fb800-fe6fbfff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.214628] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:22:19:20:f5:89
[ 6.214631] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 6.214653] 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: 1031ff-0ff
[ 6.248037] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 6.443146] usb 2-2: configuration #1 chosen from 1 choice
[ 6.446391] Initializing USB Mass Storage driver...
[ 6.446908] scsi6 : SCSI emulation for USB Mass Storage devices
[ 6.447345] usb-storage: device found at 2
[ 6.447347] usb-storage: waiting for device to settle before scanning
[ 6.447350] usbcore: registered new interface driver usb-storage
[ 6.447353] USB Mass Storage support registered.
[ 6.469221] PM: Starting manual resume from disk
[ 6.469224] PM: Resume from partition 8:8
[ 6.469225] PM: Checking hibernation image.
[ 6.469330] PM: Resume from disk failed.
[ 6.489025] kjournald starting. Commit interval 5 seconds
[ 6.489044] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.792020] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 6.970357] usb 3-1: configuration #1 chosen from 1 choice
[ 7.212026] usb 7-2: new full speed USB device using uhci_hcd and address 2
[ 7.352394] ieee1394: Host added: ID:BUS[0-00:1023] GUID[8000000a0200f0bf]
[ 7.405145] usb 7-2: configuration #1 chosen from 1 choice
[ 9.550128] udev: starting version 141
[ 9.631991] EDAC MC: Ver: 2.1.0 Apr 17 2009
[ 9.651529] x38: mmio space beyond accessible range (0x1feda0000)
[ 9.686009] usbcore: registered new interface driver hiddev
[ 9.686214] usbcore: registered new interface driver usbhid
[ 9.686217] usbhid: v2.6:USB HID core driver
[ 9.697989] iTCO_vendor_support: vendor-support=0
[ 9.700250] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 9.700432] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
[ 9.700482] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.784128] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 9.876773] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 9.888558] Linux video capture interface: v2.00
[ 9.945465] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input4
[ 9.948404] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1/input0
[ 9.977173] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[ 9.977848] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input5
[ 9.992257] logitech 0003:046D:C517.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1/input1
[ 9.997153] gspca: main v2.3.0 registered
[ 10.035298] gspca: probing 041e:4034
[ 10.267974] zc3xx: probe sif 0x0007
[ 10.271971] zc3xx: probe sensor -> 0f
[ 10.271974] zc3xx: Find Sensor PAS106
[ 10.277061] gspca: probe ok
[ 10.277085] usbcore: registered new interface driver zc3xx
[ 10.277112] zc3xx: registered
[ 10.330297] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.330372] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.363058] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 10.410240] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 10.410275] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 10.591755] lp: driver loaded but no devices found
[ 10.651528] Adding 168640k swap on /dev/sda8. Priority:-1 extents:1 across:168640k
[ 11.180817] EXT3 FS on sda7, internal journal
[ 11.450286] usb-storage: device scan complete
[ 11.454282] scsi 6:0:0:0: Direct-Access TEAC USB HS-CF Card 4.12 PQ: 0 ANSI: 0
[ 11.457400] scsi 6:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.12 PQ: 0 ANSI: 0
[ 11.461146] scsi 6:0:0:2: Direct-Access TEAC USB HS-MS Card 4.12 PQ: 0 ANSI: 0
[ 11.464273] scsi 6:0:0:3: Direct-Access TEAC USB HS-SD Card 4.12 PQ: 0 ANSI: 0
[ 11.468716] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 11.468789] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 11.473058] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 11.473096] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 11.477452] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 11.477493] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 11.498973] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 11.499036] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 12.031196] type=1505 audit(1246203450.657:2): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2190
[ 12.031260] type=1505 audit(1246203450.657:3): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2190
[ 12.031288] type=1505 audit(1246203450.657:4): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2190
[ 12.031317] type=1505 audit(1246203450.657:5): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2190
[ 12.132553] type=1505 audit(1246203450.761:6): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2195
[ 12.132661] type=1505 audit(1246203450.761:7): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2195
[ 12.154284] type=1505 audit(1246203450.781:8): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2199
[ 13.413039] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.413042] Bluetooth: BNEP filters: protocol multicast
[ 13.419536] Bridge firewalling registered
[ 14.176732] ppdev: user-space parallel port driver
[ 14.454167] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.550162] Linux agpgart interface v0.103
[ 14.589519] [drm] Initialized drm 1.1.0 20060810
[ 14.664655] pci 0000:01:00.0: setting latency timer to 64
[ 14.664993] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 14.665462] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 14.925426] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 14.925475] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 14.925510] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 14.956899] [drm] Setting GART location based on new memory map
[ 14.973116] [drm] Loading RV770 PFP Microcode
[ 14.973143] [drm] Loading RV770 CP Microcode
[ 14.988077] [drm] Resetting GPU
[ 14.988132] [drm] writeback test succeeded in 1 usecs
[ 16.028398] [drm] Resetting GPU
[ 16.094227] mtrr: no MTRR for d0000000,10000000 found
[ 18.500218] e1000e 0000:00:19.0: irq 2296 for MSI/MSI-X
[ 18.556053] e1000e 0000:00:19.0: irq 2296 for MSI/MSI-X
[ 18.556338] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.100874] 0000:00:19.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 20.100877] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 20.101057] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.200701] type=1503 audit(1246203458.829:9): operation="capable" name="sys_resource" pid=3256 profile="/sbin/dhclient3"
[ 30.716109] eth0: no IPv6 routers presentHors ligne
#2 Le 29/06/2009, à 23:08
- fpouget
Re : Démarrage Kubuntu 9.04 stoppe après Setting Advanced Power
un petit up ! là je suis sous Windows car je n'arrive pas à lancer mon kubuntu
Merci
Note pour les modérateurs je ne suis pas sût que le forum KDE soit le plus adapté à ma question ... elle était mieus, me semble t'il dans pendant l'installation .
Hors ligne
#3 Le 30/06/2009, à 23:15
- fpouget
Re : Démarrage Kubuntu 9.04 stoppe après Setting Advanced Power
Dernier petit up avant de retenter une installation ...
Hors ligne