Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#26 Le 19/04/2006, à 07:03

TheLiar

Re : [Résolu] Problème de gravure CDRW

J'ai le même problème.
Pour formatter un cdrw j'ai trouvé ceci sur le forum anglais. Il semblerait que le lecteur/graveur QSI pose un problème:

http://www.ubuntuforums.org/showthread.php?t=19891

Hors ligne

#27 Le 19/04/2006, à 20:52

cflam69

Re : [Résolu] Problème de gravure CDRW

J'y a cru ... mais non ..... Merci quand même. Peut-être parce que c'est un samsung ?!
Bon, je poursuit mes recherches.

 sudo cdrecord -immed -blank=minimal -dev=/dev/hdd
Password:
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to <cdrtools@packages.debian.org>.
      The original author should not be bothered with problems of this version.

cdrecord: Warning: Running on Linux-2.6.12-10-k7
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'ubuntu-0.8ubuntu1'.
cdrecord: Warning: using inofficial version of libscg (ubuntu-0.8ubuntu1 '@(#)scsitransp.c      1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'SAMSUNG '
Identifikation : 'CD-R/RW SW-212B '
Revision       : 'P000'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-2 SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96R
cdrecord: CD/DVD-Recorder not ready.
cdrecord: Success. prevent/allow medium removal: scsi sendcmd: no error
CDB:  1E 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 01 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x01 (logical unit is in process of becoming ready) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 40s

La liberté ne s'use que si l'on ne s'en sert pas.

Hors ligne

#28 Le 24/04/2006, à 17:33

cflam69

Re : [Résolu] Problème de gravure CDRW

Je Père Sévère (désolé mais je fatigue ! tongue) :

cdrecord dev=help
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to <cdrtools@packages.debian.org>.
      The original author should not be bothered with problems of this version.

cdrecord: Warning: Running on Linux-2.6.12-10-k7
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
Supported SCSI transports for this platform:

Transport name:         sg
Transport descr.:       Generic transport independent SCSI
Transp. layer ind.:
Target specifier:       bus,target,lun
Target example:         1,2,0
SCSI Bus scanning:      supported
Open via UNIX device:   not supported

Transport name:         pg
Transport descr.:       SCSI transport for ATAPI over Parallel Port
Transp. layer ind.:
Target specifier:       bus,target,lun
Target example:         1,2,0
SCSI Bus scanning:      supported
Open via UNIX device:   not supported

Transport name:         ATA
Transport descr.:       ATA Packet specific SCSI transport
Transp. layer ind.:     ATAPI:
Target specifier:       bus,target,lun
Target example:         ATAPI:1,2,0
SCSI Bus scanning:      supported
Open via UNIX device:   not supported

Transport name:         ATA
Transport descr.:       ATA Packet specific SCSI transport using sg interface
Transp. layer ind.:     ATA:
Target specifier:       bus,target,lun
Target example:         1,2,0
SCSI Bus scanning:      supported
Open via UNIX device:   not supported

Transport name:         RSCSI
Transport descr.:       Remote SCSI
Transp. layer ind.:     REMOTE:
Target specifier:       rscsi@host:bus,target,lun
Target example:         REMOTE:rscsi@host:1,2,0
SCSI Bus scanning:      supported
Open via UNIX device:   not supported

Donc ... rien. Je comprends rien à ce que je fais en fait. Y'aurais pas un regard extérieur pour aider le p'tit paumé (allusion au Lyonnais wink ) que je suis wink

Puis si je fais :

sudo cdrecord dev=0,1,0 blank=all
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to <cdrtools@packages.debian.org>.
      The original author should not be bothered with problems of this version.

cdrecord: Warning: Running on Linux-2.6.12-10-k7
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
cdrecord: No such file or directory. Cannot open '/dev/pg1'. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
cdrecord:
cdrecord: For more information, install the cdrtools-doc
cdrecord: package and read /usr/share/doc/cdrecord/README.ATAPI.setup

Si je cherche "Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0" dans google, j'ai pas grand chose.

J'ai posté sur ubuntuforums.org mais soit ils ne pigent rien à mon charabia en anglais lol, soit personne ne sait:(.

J'ai refait un essai de gravure hier. Un CDRW vierge => la gravure se fait mais il contient des erreurs (somme md5sum mauvaise)

S.O.S.

Merci:D


La liberté ne s'use que si l'on ne s'en sert pas.

Hors ligne

#29 Le 24/04/2006, à 18:08

cflam69

Re : [Résolu] Problème de gravure CDRW

Ah si, une nouveauté (mais faut dire que j'ai beaucoup bidouillé les fichiers conf, ...). Maintenant, cdrecord -scanbus renvoi :
sudo cdrecord -scanbus dev=/dev/hdd

Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to <cdrtools@packages.debian.org>.
      The original author should not be bothered with problems of this version.

cdrecord: Warning: Running on Linux-2.6.12-10-k7
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'ubuntu-0.8ubuntu1'.
cdrecord: Warning: using inofficial version of libscg (ubuntu-0.8ubuntu1 '@(#)scsitransp.c      1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
scsibus1:
        1,0,0   100) *
        1,1,0   101) 'SAMSUNG ' 'CD-R/RW SW-212B ' 'P000' Removable CD-ROM
        1,2,0   102) *
        1,3,0   103) *
        1,4,0   104) *
        1,5,0   105) *
        1,6,0   106) *
        1,7,0   107) *

Du coup :

sudo cdrecord -v -force -speed=8 -dev=ATAPI:1,1,0 -blank=all
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to <cdrtools@packages.debian.org>.
      The original author should not be bothered with problems of this version.

cdrecord: Warning: Running on Linux-2.6.12-10-k7
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
TOC Type: 1 = CD-ROM
scsidev: 'ATAPI:1,1,0'
devname: 'ATAPI'
scsibus: 1 target: 1 lun: 0
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Using libscg version 'ubuntu-0.8ubuntu1'.
cdrecord: Warning: using inofficial version of libscg (ubuntu-0.8ubuntu1 '@(#)scsitransp.c      1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
SCSI buffer size: 64512
atapi: -1
cdrecord: Cannot do inquiry for CD/DVD-Recorder.
cdrecord: Input/output error. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s

Je n'ai donc plus le même message d'erreur !!! hmm Pfff !


La liberté ne s'use que si l'on ne s'en sert pas.

Hors ligne

#30 Le 27/04/2006, à 19:33

cflam69

Re : [Résolu] Problème de gravure CDRW

Donc, j'ai essayer une solution trouver sur le site ubuntu anglais : réinstaller cdrecord depuis les dépôt Universe seulement.
Résultat : du mieux puisqu'il commence à formater pendant 20 min mais il y a toujours une erreur (mais une auter) dans le formatage.

cdrecord dev=/dev/hdd blank=all
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to <cdrtools@packages.debian.org>.
      The original author should not be bothered with problems of this version.

cdrecord: Warning: Running on Linux-2.6.12-10-k7
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
scsidev: '/dev/hdd'
devname: '/dev/hdd'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'ubuntu-0.8ubuntu1'.
cdrecord: Warning: using inofficial version of libscg (ubuntu-0.8ubuntu1 '@(#)scsitransp.c      1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling').
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'SAMSUNG '
Identifikation : 'CD-R/RW SW-212B '
Revision       : 'P000'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-2 SWABAUDIO
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96R
Starting to write CD/DVD at speed 4 in real BLANK mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
cdrecord: Success. blank unit: scsi sendcmd: no error
CDB:  A1 00 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 20 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x20 Qual 0x00 (invalid command operation code) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 1310.269s timeout 9600s
cdrecord: Cannot blank disk, aborting.

Je cherche, je cherche ... mais si vous avez encore un soupçon d'idée !


La liberté ne s'use que si l'on ne s'en sert pas.

Hors ligne

#31 Le 28/04/2006, à 13:37

cflam69

Re : [Résolu] Problème de gravure CDRW

Bon, j'avance SEUL hmm à petit pas. Depuis mes bricolages :
- Le formatage fonctionne aléatoirement mais parfois il fonctionne avec k3b uniquement (même pas en ligne de commande simple).
- la gravure semble fonctionner sous k3b. Avant hier, je bloquais sur le calcul de la somme MD5SUM. Hier, ça passe.

Le tout me semble bien fragile alors je ne met pas encore de résolu.


La liberté ne s'use que si l'on ne s'en sert pas.

Hors ligne

#32 Le 05/05/2006, à 15:23

cflam69

Re : [Résolu] Problème de gravure CDRW

Bon, plusieurs images .iso de Dapper Flight et beta wink ont été gravé avec succès. Le formatage refonctionne. Le bonheur à l'état pure. big_smile
La gravure des CDR fonctionne toujours.

Mais l'ensemble ne réponds qu'aux commandes de k3b (merci KDE).

Je remercie cep_ , The Liar, goodluck et Fully pour leur soutien. big_smile


La liberté ne s'use que si l'on ne s'en sert pas.

Hors ligne

#33 Le 19/05/2006, à 03:19

mondsur

Re : [Résolu] Problème de gravure CDRW

Bonsoir. J'ai eu un probleme une fois avec un dvd non finalisé qui fut illisible. Et j'ai tenté la version free de nero pour linux. Je crois meme que j'avais tenté une install avec wine et une normale. Tout a parfaitement marché, un petit bug au demarage car il redemande a chaque fois le calibrage des lecteurs. Sinon rien a redire, tente pour voir.

Hors ligne

#34 Le 07/11/2007, à 17:29

loulou8292

Re : [Résolu] Problème de gravure CDRW

bonsoir est ce que quelqu'un pourrait m'aide enfait je recherche un logiciel  de gravure pour fichier video_ts car k3b je n'arrive pas ou si quelqu'un sait comment faire avec k3b merci d'avance

Hors ligne