Ubuntu-fr

Scaramanga

[Résolu] Pb Installation tablette Wacom Bamboo

Bonjourà tous,
Je tente d'installer et de configurer ma tablette graphique  Wacom bamboo.

Je suis ce tutoriel .

No problemeo jusqu'a ce que j'arrive au stade

<del>sudo</del> make

je pense qu'il y a une erreur de frappe ! N'est ce pas plutôt  n'est pas plutôt :

sudo make

?

A mon avis ça se passe moyen; j'obtiens ça :

scaramanga@scaramanga-desktop:~/wacom/linuxwacom-0.8.0-3$ sudo make
Making all in src
make[1]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src »
Making all in .
make[2]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src »
make[2]: Rien à faire pour « all-am ».
make[2]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src »
Making all in wacomxi
make[2]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/wacomxi »
make[2]: Rien à faire pour « all ».
make[2]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/wacomxi »
Making all in util
make[2]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/util »
make[2]: Rien à faire pour « all ».
make[2]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/util »
Making all in xdrv
make[2]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/xdrv »
gcc -g -O2 -I/usr/include/tcl8.4  -fPIC -pipe -std=c99 \
		-pedantic -Wall -Wpointer-arith -fno-merge-constants \
		-fno-stack-protector -I. -I../include -I/usr/include/xorg  \
		 -I/usr/include/xorg -I/usr/include/pixman-1   \
		-o xf86Wacom.o -c ./xf86Wacom.c
Dans le fichier inclus à partir de ./xf86Wacom.c:79:
./xf86Wacom.h:26:25: erreur: xf86Version.h : Aucun fichier ou dossier de ce type
./xf86Wacom.c: In function ‘xf86WcmRegisterX11Devices’:
./xf86Wacom.c:582: attention : passing argument 3 of ‘InitValuatorClassDeviceStruct’ makes integer from pointer without a cast
./xf86Wacom.c:582: erreur: too many arguments to function ‘InitValuatorClassDeviceStruct’
make[2]: *** [xf86Wacom.o] Erreur 1
make[2]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/xdrv »
make[1]: *** [all-recursive] Erreur 1
make[1]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src »
make: *** [all-recursive] Erreur 1
scaramanga@scaramanga-desktop:~/wacom/linuxwacom-0.8.0-3$ sudo make install
Making install in src
make[1]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src »
Making install in .
make[2]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src »
make[3]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src »
make[3]: Rien à faire pour « install-exec-am ».
test -z "/usr/local/man/man4" || mkdir -p -- "/usr/local/man/man4"
 /usr/bin/install -c -m 644 'wacom.4x.gz' '/usr/local/man/man4/wacom.4x.gz'
make[3]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src »
make[2]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src »
Making install in wacomxi
make[2]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/wacomxi »
make[3]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/wacomxi »
make[3]: Rien à faire pour « install-exec-am ».
test -z "/usr/local/bin" || mkdir -p -- "/usr/local/bin"
 /usr/bin/install -c 'wacomcpl' '/usr/local/bin/wacomcpl'
 /usr/bin/install -c 'wacomcpl-exec' '/usr/local/bin/wacomcpl-exec'
test -z "/usr/local/lib/TkXInput" || mkdir -p -- "/usr/local/lib/TkXInput"
 /usr/bin/install -c -m 644 'pkgIndex.tcl' '/usr/local/lib/TkXInput/pkgIndex.tcl'
test -z "/usr/local/lib/TkXInput" || mkdir -p -- "/usr/local/lib/TkXInput"
 /bin/bash ../../libtool --mode=install /usr/bin/install -c  'libwacomxi.la' '/usr/local/lib/TkXInput/libwacomxi.la'
/usr/bin/install -c .libs/libwacomxi.so.0.0.0 /usr/local/lib/TkXInput/libwacomxi.so.0.0.0
(cd /usr/local/lib/TkXInput && { ln -s -f libwacomxi.so.0.0.0 libwacomxi.so.0 || { rm -f libwacomxi.so.0 && ln -s libwacomxi.so.0.0.0 libwacomxi.so.0; }; })
(cd /usr/local/lib/TkXInput && { ln -s -f libwacomxi.so.0.0.0 libwacomxi.so || { rm -f libwacomxi.so && ln -s libwacomxi.so.0.0.0 libwacomxi.so; }; })
/usr/bin/install -c .libs/libwacomxi.lai /usr/local/lib/TkXInput/libwacomxi.la
/usr/bin/install -c .libs/libwacomxi.a /usr/local/lib/TkXInput/libwacomxi.a
chmod 644 /usr/local/lib/TkXInput/libwacomxi.a
ranlib /usr/local/lib/TkXInput/libwacomxi.a
PATH="$PATH:/sbin" ldconfig -n /usr/local/lib/TkXInput
----------------------------------------------------------------------
Libraries have been installed in:
   /usr/local/lib/TkXInput

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[3]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/wacomxi »
make[2]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/wacomxi »
Making install in util
make[2]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/util »
make[3]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/util »
test -z "/usr/local/lib" || mkdir -p -- "/usr/local/lib"
 /bin/bash ../../libtool --mode=install /usr/bin/install -c  'libwacomcfg.la' '/usr/local/lib/libwacomcfg.la'
/usr/bin/install -c .libs/libwacomcfg.so.0.0.1 /usr/local/lib/libwacomcfg.so.0.0.1
(cd /usr/local/lib && { ln -s -f libwacomcfg.so.0.0.1 libwacomcfg.so.0 || { rm -f libwacomcfg.so.0 && ln -s libwacomcfg.so.0.0.1 libwacomcfg.so.0; }; })
(cd /usr/local/lib && { ln -s -f libwacomcfg.so.0.0.1 libwacomcfg.so || { rm -f libwacomcfg.so && ln -s libwacomcfg.so.0.0.1 libwacomcfg.so; }; })
/usr/bin/install -c .libs/libwacomcfg.lai /usr/local/lib/libwacomcfg.la
/usr/bin/install -c .libs/libwacomcfg.a /usr/local/lib/libwacomcfg.a
chmod 644 /usr/local/lib/libwacomcfg.a
ranlib /usr/local/lib/libwacomcfg.a
PATH="$PATH:/sbin" ldconfig -n /usr/local/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /usr/local/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
test -z "/usr/local/bin" || mkdir -p -- "/usr/local/bin"
  /bin/bash ../../libtool --mode=install /usr/bin/install -c 'wacdump' '/usr/local/bin/wacdump'
/usr/bin/install -c wacdump /usr/local/bin/wacdump
  /bin/bash ../../libtool --mode=install /usr/bin/install -c 'xidump' '/usr/local/bin/xidump'
/usr/bin/install -c xidump /usr/local/bin/xidump
  /bin/bash ../../libtool --mode=install /usr/bin/install -c 'xsetwacom' '/usr/local/bin/xsetwacom'
/usr/bin/install -c .libs/xsetwacom /usr/local/bin/xsetwacom
test -z "/usr/local/include/wacomcfg" || mkdir -p -- "/usr/local/include/wacomcfg"
 /usr/bin/install -c -m 644 'wacomcfg.h' '/usr/local/include/wacomcfg/wacomcfg.h'
make[3]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/util »
make[2]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/util »
Making install in xdrv
make[2]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/xdrv »
gcc -g -O2 -I/usr/include/tcl8.4  -fPIC -pipe -std=c99 \
		-pedantic -Wall -Wpointer-arith -fno-merge-constants \
		-fno-stack-protector -I. -I../include -I/usr/include/xorg  \
		 -I/usr/include/xorg -I/usr/include/pixman-1   \
		-o xf86Wacom.o -c ./xf86Wacom.c
Dans le fichier inclus à partir de ./xf86Wacom.c:79:
./xf86Wacom.h:26:25: erreur: xf86Version.h : Aucun fichier ou dossier de ce type
./xf86Wacom.c: In function ‘xf86WcmRegisterX11Devices’:
./xf86Wacom.c:582: attention : passing argument 3 of ‘InitValuatorClassDeviceStruct’ makes integer from pointer without a cast
./xf86Wacom.c:582: erreur: too many arguments to function ‘InitValuatorClassDeviceStruct’
make[2]: *** [xf86Wacom.o] Erreur 1
make[2]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/xdrv »
make[1]: *** [install-recursive] Erreur 1
make[1]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src »
make: *** [install-recursive] Erreur 1
scaramanga@scaramanga-desktop:~/wacom/linuxwacom-0.8.0-3$ sudo make
Making all in src
make[1]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src »
Making all in .
make[2]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src »
make[2]: Rien à faire pour « all-am ».
make[2]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src »
Making all in wacomxi
make[2]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/wacomxi »
make[2]: Rien à faire pour « all ».
make[2]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/wacomxi »
Making all in util
make[2]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/util »
make[2]: Rien à faire pour « all ».
make[2]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/util »
Making all in xdrv
make[2]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/xdrv »
gcc -g -O2 -I/usr/include/tcl8.4  -fPIC -pipe -std=c99 \
		-pedantic -Wall -Wpointer-arith -fno-merge-constants \
		-fno-stack-protector -I. -I../include -I/usr/include/xorg  \
		 -I/usr/include/xorg -I/usr/include/pixman-1   \
		-o xf86Wacom.o -c ./xf86Wacom.c
Dans le fichier inclus à partir de ./xf86Wacom.c:79:
./xf86Wacom.h:26:25: erreur: xf86Version.h : Aucun fichier ou dossier de ce type
./xf86Wacom.c: In function ‘xf86WcmRegisterX11Devices’:
./xf86Wacom.c:582: attention : passing argument 3 of ‘InitValuatorClassDeviceStruct’ makes integer from pointer without a cast
./xf86Wacom.c:582: erreur: too many arguments to function ‘InitValuatorClassDeviceStruct’
make[2]: *** [xf86Wacom.o] Erreur 1
make[2]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/xdrv »
make[1]: *** [all-recursive] Erreur 1
make[1]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src »
make: *** [all-recursive] Erreur 1
scaramanga@scaramanga-desktop:~/wacom/linuxwacom-0.8.0-3$

Je continue malgré tout avec :

sudo make install

j'obtiens :

scaramanga@scaramanga-desktop:~/wacom/linuxwacom-0.8.0-3$ sudo make install
Making install in src
make[1]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src »
Making install in .
make[2]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src »
make[3]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src »
make[3]: Rien à faire pour « install-exec-am ».
test -z "/usr/local/man/man4" || mkdir -p -- "/usr/local/man/man4"
 /usr/bin/install -c -m 644 'wacom.4x.gz' '/usr/local/man/man4/wacom.4x.gz'
make[3]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src »
make[2]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src »
Making install in wacomxi
make[2]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/wacomxi »
make[3]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/wacomxi »
make[3]: Rien à faire pour « install-exec-am ».
test -z "/usr/local/bin" || mkdir -p -- "/usr/local/bin"
 /usr/bin/install -c 'wacomcpl' '/usr/local/bin/wacomcpl'
 /usr/bin/install -c 'wacomcpl-exec' '/usr/local/bin/wacomcpl-exec'
test -z "/usr/local/lib/TkXInput" || mkdir -p -- "/usr/local/lib/TkXInput"
 /usr/bin/install -c -m 644 'pkgIndex.tcl' '/usr/local/lib/TkXInput/pkgIndex.tcl'
test -z "/usr/local/lib/TkXInput" || mkdir -p -- "/usr/local/lib/TkXInput"
 /bin/bash ../../libtool --mode=install /usr/bin/install -c  'libwacomxi.la' '/usr/local/lib/TkXInput/libwacomxi.la'
/usr/bin/install -c .libs/libwacomxi.so.0.0.0 /usr/local/lib/TkXInput/libwacomxi.so.0.0.0
(cd /usr/local/lib/TkXInput && { ln -s -f libwacomxi.so.0.0.0 libwacomxi.so.0 || { rm -f libwacomxi.so.0 && ln -s libwacomxi.so.0.0.0 libwacomxi.so.0; }; })
(cd /usr/local/lib/TkXInput && { ln -s -f libwacomxi.so.0.0.0 libwacomxi.so || { rm -f libwacomxi.so && ln -s libwacomxi.so.0.0.0 libwacomxi.so; }; })
/usr/bin/install -c .libs/libwacomxi.lai /usr/local/lib/TkXInput/libwacomxi.la
/usr/bin/install -c .libs/libwacomxi.a /usr/local/lib/TkXInput/libwacomxi.a
chmod 644 /usr/local/lib/TkXInput/libwacomxi.a
ranlib /usr/local/lib/TkXInput/libwacomxi.a
PATH="$PATH:/sbin" ldconfig -n /usr/local/lib/TkXInput
----------------------------------------------------------------------
Libraries have been installed in:
   /usr/local/lib/TkXInput

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[3]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/wacomxi »
make[2]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/wacomxi »
Making install in util
make[2]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/util »
make[3]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/util »
test -z "/usr/local/lib" || mkdir -p -- "/usr/local/lib"
 /bin/bash ../../libtool --mode=install /usr/bin/install -c  'libwacomcfg.la' '/usr/local/lib/libwacomcfg.la'
/usr/bin/install -c .libs/libwacomcfg.so.0.0.1 /usr/local/lib/libwacomcfg.so.0.0.1
(cd /usr/local/lib && { ln -s -f libwacomcfg.so.0.0.1 libwacomcfg.so.0 || { rm -f libwacomcfg.so.0 && ln -s libwacomcfg.so.0.0.1 libwacomcfg.so.0; }; })
(cd /usr/local/lib && { ln -s -f libwacomcfg.so.0.0.1 libwacomcfg.so || { rm -f libwacomcfg.so && ln -s libwacomcfg.so.0.0.1 libwacomcfg.so; }; })
/usr/bin/install -c .libs/libwacomcfg.lai /usr/local/lib/libwacomcfg.la
/usr/bin/install -c .libs/libwacomcfg.a /usr/local/lib/libwacomcfg.a
chmod 644 /usr/local/lib/libwacomcfg.a
ranlib /usr/local/lib/libwacomcfg.a
PATH="$PATH:/sbin" ldconfig -n /usr/local/lib
----------------------------------------------------------------------
Libraries have been installed in:
   /usr/local/lib

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
test -z "/usr/local/bin" || mkdir -p -- "/usr/local/bin"
  /bin/bash ../../libtool --mode=install /usr/bin/install -c 'wacdump' '/usr/local/bin/wacdump'
/usr/bin/install -c wacdump /usr/local/bin/wacdump
  /bin/bash ../../libtool --mode=install /usr/bin/install -c 'xidump' '/usr/local/bin/xidump'
/usr/bin/install -c xidump /usr/local/bin/xidump
  /bin/bash ../../libtool --mode=install /usr/bin/install -c 'xsetwacom' '/usr/local/bin/xsetwacom'
/usr/bin/install -c .libs/xsetwacom /usr/local/bin/xsetwacom
test -z "/usr/local/include/wacomcfg" || mkdir -p -- "/usr/local/include/wacomcfg"
 /usr/bin/install -c -m 644 'wacomcfg.h' '/usr/local/include/wacomcfg/wacomcfg.h'
make[3]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/util »
make[2]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/util »
Making install in xdrv
make[2]: entrant dans le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/xdrv »
gcc -g -O2 -I/usr/include/tcl8.4  -fPIC -pipe -std=c99 \
		-pedantic -Wall -Wpointer-arith -fno-merge-constants \
		-fno-stack-protector -I. -I../include -I/usr/include/xorg  \
		 -I/usr/include/xorg -I/usr/include/pixman-1   \
		-o xf86Wacom.o -c ./xf86Wacom.c
Dans le fichier inclus à partir de ./xf86Wacom.c:79:
./xf86Wacom.h:26:25: erreur: xf86Version.h : Aucun fichier ou dossier de ce type
./xf86Wacom.c: In function ‘xf86WcmRegisterX11Devices’:
./xf86Wacom.c:582: attention : passing argument 3 of ‘InitValuatorClassDeviceStruct’ makes integer from pointer without a cast
./xf86Wacom.c:582: erreur: too many arguments to function ‘InitValuatorClassDeviceStruct’
make[2]: *** [xf86Wacom.o] Erreur 1
make[2]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src/xdrv »
make[1]: *** [install-recursive] Erreur 1
make[1]: quittant le répertoire « /home/scaramanga/wacom/linuxwacom-0.8.0-3/src »
make: *** [install-recursive] Erreur 1
scaramanga@scaramanga-desktop:~/wacom/linuxwacom-0.8.0-3$

Pour la suite du tuto, j'ai tout faux; Test du pilote , Configuration du pilote....etc..

Merci pour votre aide.

Dernière modification par Scaramanga (Le 23/08/2009, à 07:50)

---

[MB:  Asus H170 Pro][Core i3-6100][GeForce GT 710] [8Go Ram] Linux Mint

Scaramanga

Re : [Résolu] Pb Installation tablette Wacom Bamboo

J'ai DL et installé le pilote linuxwacom-0.8.4.

Ca se passe mieux; pas d'erreur :

scaramanga@scaramanga-desktop:~/linuxwacom-0.8.4$ ./configure && make
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for gawk... (cached) mawk
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognize dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether  accepts -g... no
checking the maximum length of command line arguments... 1572864
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
(cached) (cached) checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for HAL... no
checking for arch type... i486-linux-gnu
checking for kernel type... Linux
checking for linux-based kernel... yes
checking for kernel source/headers... /lib/modules/2.6.28-15-generic/build
checking kernel version... 2.6.28-15-generic
checking for kernel module support... yes
checking for Xlib... yes
checking for XSERVER... yes
checking for xserver libc-wrapper header-files... no
checking if scaling tablet to screen size is needed... no
checking if Uninit is called... yes
checking if Xorg is version 1.6 or later... yes
yes
checking if Xorg SDK defines dixScreenOrigins... yes
checking XInput extension version... >= 2.0
checking for lib xf86config... checking for XORG... yes
checking for X... libraries , headers 
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking for tclsh... /usr/bin/tclsh
checking for tcl version... 8.4
checking for tcl header files... found, /usr/include/tcl8.4
checking for tk header files... found, /usr/include/tcl8.4
checking ncurses.h usability... yes
checking ncurses.h presence... yes
checking for ncurses.h... yes
checking if libwacomcfg should/can be built... yes
checking if libwacomxi should/can be built... yes
checking if wacdump should/can be built... yes
checking if xidump should/can be built... yes
checking if xsetwacom should be built... yes
checking for Wacom X driver module path... /usr/lib/xorg/modules/input
checking for dynamic driver loading support... yes
checking if wacom_drv.{o,so} should be compiled... yes
checking if gcc accepts -fno-merge-constants... yes
checking if gcc accepts -fno-stack-protector... yes

configure: creating ./config.status
config.status: creating Makefile
config.status: creating mkxincludes
config.status: creating src/Makefile
config.status: creating src/util/Makefile
config.status: creating src/xdrv/Makefile
config.status: creating src/2.6.9/Makefile
config.status: creating src/2.6.10/Makefile
config.status: creating src/2.6.11/Makefile
config.status: creating src/2.6.13/Makefile
config.status: creating src/2.6.14/Makefile
config.status: creating src/2.6.15/Makefile
config.status: creating src/2.6.16/Makefile
config.status: creating src/2.6.18/Makefile
config.status: creating src/2.6.19/Makefile
config.status: creating src/2.6.22/Makefile
config.status: creating src/2.6.24/Makefile
config.status: creating src/2.6.26/Makefile
config.status: creating src/2.6.27/Makefile
config.status: creating src/2.6.28/Makefile
config.status: creating src/2.6.31/Makefile
config.status: creating src/wacomxi/Makefile
config.status: creating src/wacomxi/wacomcpl
config.status: creating src/include/xdrv-config.h
config.status: src/include/xdrv-config.h is unchanged
config.status: creating src/include/kernel-config.h
config.status: src/include/kernel-config.h is unchanged
config.status: creating src/include/util-config.h
config.status: src/include/util-config.h is unchanged
config.status: executing depfiles commands

----------------------------------------
  BUILD ENVIRONMENT:
       architecture - i486-linux-gnu
       linux kernel - yes 2.6.28
  module versioning - no 
      kernel source - yes /lib/modules/2.6.28-15-generic/build
     XFree86 source - no 
           Xorg SDK - yes /usr/include/xorg
          XSERVER64 - no
           dlloader - yes
               XLib - yes /usr/lib
         xf86config - no
                TCL - yes /usr/include/tcl8.4
                 TK - yes /usr/include/tcl8.4
            ncurses - yes

  BUILD OPTIONS:
            wacom.o - no
            wacdump - yes 
             xidump - yes 
        libwacomcfg - yes
         libwacomxi - yes
          xsetwacom - yes
              hid.o - no 
       wacom_drv.so - yes /usr/lib/xorg/modules/input 
        wacom_drv.o - no
  wacom*_drv quirks - Uninit-called IsXExtensionPointer key-events dixScreenOrigins
----------------------------------------
Making all in src
make[1]: entrant dans le répertoire « /home/scaramanga/linuxwacom-0.8.4/src »
Making all in .
make[2]: entrant dans le répertoire « /home/scaramanga/linuxwacom-0.8.4/src »
make[2]: Rien à faire pour « all-am ».
make[2]: quittant le répertoire « /home/scaramanga/linuxwacom-0.8.4/src »
Making all in wacomxi
make[2]: entrant dans le répertoire « /home/scaramanga/linuxwacom-0.8.4/src/wacomxi »
make[2]: Rien à faire pour « all ».
make[2]: quittant le répertoire « /home/scaramanga/linuxwacom-0.8.4/src/wacomxi »
Making all in util
make[2]: entrant dans le répertoire « /home/scaramanga/linuxwacom-0.8.4/src/util »
make[2]: Rien à faire pour « all ».
make[2]: quittant le répertoire « /home/scaramanga/linuxwacom-0.8.4/src/util »
Making all in xdrv
make[2]: entrant dans le répertoire « /home/scaramanga/linuxwacom-0.8.4/src/xdrv »
gcc -MM -g -O2 -I/usr/include/tcl8.4  -I../include -I/usr/include/xorg  -I/usr/include/xorg -I/usr/include/pixman-1   ./xf86Wacom.c ./wcmSerial.c ./wcmUSB.c ./wcmISDV4.c ./wcmXCommand.c ./wcmCommon.c ./wcmCompat.c ./wcmConfig.c ./wcmFilter.c ./wcmTilt2Rotation.c > .depend
make[2]: quittant le répertoire « /home/scaramanga/linuxwacom-0.8.4/src/xdrv »
make[2]: entrant dans le répertoire « /home/scaramanga/linuxwacom-0.8.4/src/xdrv »
gcc -shared -nostdlib -o wacom_drv.so xf86Wacom.o wcmSerial.o wcmUSB.o wcmISDV4.o wcmXCommand.o wcmCommon.o wcmCompat.o wcmConfig.o wcmFilter.o wcmTilt2Rotation.o -Bstatic -lgcc
make[2]: quittant le répertoire « /home/scaramanga/linuxwacom-0.8.4/src/xdrv »
Making all in 2.6.28
make[2]: entrant dans le répertoire « /home/scaramanga/linuxwacom-0.8.4/src/2.6.28 »
    Building linuxwacom drivers for 2.6 kernel.
***Note: Drivers not enabled as modules in your kernel config but requested through configure are NOT built
make -C /lib/modules/2.6.28-15-generic/build M=/home/scaramanga/linuxwacom-0.8.4/src/2.6.28
make[3]: entrant dans le répertoire « /usr/src/linux-headers-2.6.28-15-generic »
  Building modules, stage 2.
  MODPOST 0 modules
make[3]: quittant le répertoire « /usr/src/linux-headers-2.6.28-15-generic »
make[2]: quittant le répertoire « /home/scaramanga/linuxwacom-0.8.4/src/2.6.28 »
make[1]: quittant le répertoire « /home/scaramanga/linuxwacom-0.8.4/src »
make[1]: entrant dans le répertoire « /home/scaramanga/linuxwacom-0.8.4 »
make[1]: Rien à faire pour « all-am ».
make[1]: quittant le répertoire « /home/scaramanga/linuxwacom-0.8.4 »
scaramanga@scaramanga-desktop:~/linuxwacom-0.8.4$

Maiis enxuite, je bloque. JE ne trouve pas le pilote et pas de trace de Wacom dans le fichier xorg.conf

---

[MB:  Asus H170 Pro][Core i3-6100][GeForce GT 710] [8Go Ram] Linux Mint

phenix88be

Re : [Résolu] Pb Installation tablette Wacom Bamboo

Heu... La wacom Bamboo est reconnue Out Of The Box

Perso, je l'ai acheter ... et brancher ... et c'est tout

---

Sous MacOS, ben oui...
Mon portfolio - Web design - Web développement.

Scaramanga

Re : [Résolu] Pb Installation tablette Wacom Bamboo

HAa....bizarre....
Voici le cxontenur de mon fichier xorg.conf

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Monitor"
	Identifier	"Configured Monitor"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
	DefaultDepth	24
EndSection

Section "Module"
	Load	"glx"
	Disable	"dri2"
EndSection

Section "Device"
	Identifier	"Configured Video Device"
	Option	"NoLogo"	"True"
	Driver	"nvidia"
EndSection

Ne devra

---

[MB:  Asus H170 Pro][Core i3-6100][GeForce GT 710] [8Go Ram] Linux Mint

Scaramanga

Re : [Résolu] Pb Installation tablette Wacom Bamboo

Ha....bizarre....
Voici le contenu de mon fichier xorg.conf

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Monitor"
	Identifier	"Configured Monitor"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Monitor		"Configured Monitor"
	Device		"Configured Video Device"
	DefaultDepth	24
EndSection

Section "Module"
	Load	"glx"
	Disable	"dri2"
EndSection

Section "Device"
	Identifier	"Configured Video Device"
	Option	"NoLogo"	"True"
	Driver	"nvidia"
EndSection

Ne devrais je pas y trouver une section :

Section "Module"
	...
	Load    	"wacom"
 EndSection

Comme indiqué dans le tuto?

Dans Gimp, il y a juste la fonction écriture qui fonctionne, la gomme ne fonctionne pas.

---

[MB:  Asus H170 Pro][Core i3-6100][GeForce GT 710] [8Go Ram] Linux Mint

Scaramanga

Re : [Résolu] Pb Installation tablette Wacom Bamboo

Pourquoi faire simple....Il faut installer wacom-tool depuis les dépôts.  A présent j'ai la gomme qui fonctionne et le stylé qui réagit à la force appliquée.

---

[MB:  Asus H170 Pro][Core i3-6100][GeForce GT 710] [8Go Ram] Linux Mint