#1 Le 02/09/2009, à 13:03
- tux4fun
Définir correctement vmalloc option du kernel dans grub
Bonjour,
Voilà l'origine de mon post, malgrés mais effort j'obtiens à chaquefois ceci dans dmesg:
[ 32.838077] vmap allocation for size 134221824 failed: use vmalloc=<size> to increase size.Comment faire pour y remédier, s'il vous plaît ? çà me rend chèvre...
mon dmesg
[ 0.000000] ACPI: DSDT 37ff30c0 024A9 (v01 VIA694 AWRDACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 37ff0000 00040
[ 0.000000] 13MB HIGHMEM available.
[ 0.000000] 881MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 371fe000
[ 0.000000] low ram: 0 - 371fe000
[ 0.000000] node 0 low ram: 00000000 - 371fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ee40
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00371fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 0000563290] TEXT DATA BSS ==> [0000100000 - 0000563290]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0000564000 - 00005690d8] BRK ==> [0000564000 - 00005690d8]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [000056a000 - 0000dae8fe] NEW RAMDISK ==> [000056a000 - 0000dae8fe]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000371fe
[ 0.000000] HighMem 0x000371fe -> 0x00037ff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00037ff0
[ 0.000000] On node 0 totalpages: 229263
[ 0.000000] free_area_init_node: node 0, pgdat c041aa00, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1732 pages used for memmap
[ 0.000000] Normal zone: 219962 pages, LIFO batch:31
[ 0.000000] HighMem zone: 28 pages used for memmap
[ 0.000000] HighMem zone: 3542 pages, LIFO batch:0
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 38000000:c7ff0000)
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages at c1706000, static data 25532 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227471
[ 0.000000] Kernel command line: root=/dev/hdb1 vmalloc=131072KB nolapic ro
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] NR_IRQS:1280
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1406.607 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Initializing HighMem for node 0 (000371fe:00037ff0)
[ 0.004000] Memory: 895844k/917440k available (2216k kernel code, 21052k reserved, 1184k data, 332k init, 14280k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffe16000 - 0xfffff000 (1956 kB)
[ 0.004000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.004000] vmalloc : 0xf79fe000 - 0xff9fe000 ( 128 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf71fe000 ( 881 MB)
[ 0.004000] .init : 0xc045a000 - 0xc04ad000 ( 332 kB)
[ 0.004000] .data : 0xc032a3d1 - 0xc0452430 (1184 kB)
[ 0.004000] .text : 0xc0100000 - 0xc032a3d1 (2216 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004024] Calibrating delay loop (skipped), value calculated using timer frequency.. 2813.21 BogoMIPS (lpj=5626428)
[ 0.004190] Security Framework initialized
[ 0.004242] SELinux: Disabled at boot.
[ 0.004308] Mount-cache hash table entries: 512
[ 0.004610] Initializing cgroup subsys ns
[ 0.004661] Initializing cgroup subsys cpuacct
[ 0.004707] Initializing cgroup subsys devices
[ 0.004751] Initializing cgroup subsys freezer
[ 0.004794] Initializing cgroup subsys net_cls
[ 0.004865] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004914] CPU: L2 Cache: 64K (64 bytes/line)
[ 0.004962] Intel machine check architecture supported.
[ 0.005006] Intel machine check reporting enabled on CPU#0.
[ 0.005075] Checking 'hlt' instruction... OK.
[ 0.020398] SMP alternatives: switching to UP code
[ 0.026083] Freeing SMP alternatives: 12k freed
[ 0.026176] ACPI: Core revision 20090320
[ 0.031795] ACPI: setting ELCR to 0800 (from 0e20)
[ 0.036209] weird, boot CPU (#0) not listed by the BIOS.
[ 0.036255] SMP motherboard not detected.
[ 0.036299] Apic disabled
[ 0.036337] Local APIC not detected. Using dummy APIC emulation.
[ 0.036381] SMP disabled
[ 0.040045] Brought up 1 CPUs
[ 0.040097] Total of 1 processors activated (2813.21 BogoMIPS).
[ 0.040171] CPU0 attaching NULL sched-domain.
[ 0.040898] net_namespace: 1088 bytes
[ 0.041056] Booting paravirtualized kernel on bare hardware
[ 0.041446] regulator: core version 0.5
[ 0.041729] NET: Registered protocol family 16
[ 0.042468] ACPI: bus type pci registered
[ 0.072342] PCI: PCI BIOS revision 2.10 entry at 0xfb380, last bus=1
[ 0.072393] PCI: Using configuration type 1 for base access
[ 0.074471] bio: create slab <bio-0> at 0
[ 0.075325] ACPI: EC: Look up EC in DSDT
[ 0.079745] ACPI: Interpreter enabled
[ 0.079802] ACPI: (supports S0 S1 S4 S5)
[ 0.080098] ACPI: Using PIC for interrupt routing
[ 0.087796] ACPI: No dock devices found.
[ 0.087875] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.088612] pci 0000:00:00.0: reg 10 32bit mmio: [0xd6000000-0xd6ffffff]
[ 0.088690] pci 0000:00:01.0: supports D1
[ 0.088792] pci 0000:00:07.1: reg 20 io port: [0xa000-0xa00f]
[ 0.088853] pci 0000:00:07.2: reg 20 io port: [0xa400-0xa41f]
[ 0.088910] pci 0000:00:07.3: reg 20 io port: [0xa800-0xa81f]
[ 0.088984] pci 0000:00:07.4: quirk: region 6000-607f claimed by vt82c686 HW-mon
[ 0.089044] pci 0000:00:07.4: quirk: region 5000-500f claimed by vt82c686 SMB
[ 0.089130] pci 0000:00:0b.0: reg 10 io port: [0xb800-0xb8ff]
[ 0.089138] pci 0000:00:0b.0: reg 14 32bit mmio: [0xd7000000-0xd70000ff]
[ 0.089168] pci 0000:00:0b.0: supports D1 D2
[ 0.089172] pci 0000:00:0b.0: PME# supported from D1 D2 D3hot
[ 0.089219] pci 0000:00:0b.0: PME# disabled
[ 0.089287] pci 0000:00:0d.0: reg 10 io port: [0xbc00-0xbc1f]
[ 0.089319] pci 0000:00:0d.0: supports D1 D2
[ 0.089346] pci 0000:00:0d.1: reg 10 io port: [0xc000-0xc007]
[ 0.089378] pci 0000:00:0d.1: supports D1 D2
[ 0.089415] pci 0000:00:11.0: reg 10 io port: [0xc400-0xc4ff]
[ 0.089423] pci 0000:00:11.0: reg 14 32bit mmio: [0xd7001000-0xd70010ff]
[ 0.089453] pci 0000:00:11.0: supports D1 D2
[ 0.089456] pci 0000:00:11.0: PME# supported from D1 D2 D3hot
[ 0.089501] pci 0000:00:11.0: PME# disabled
[ 0.089572] pci 0000:00:12.0: reg 10 32bit mmio: [0xd7002000-0xd7002fff]
[ 0.089639] pci 0000:00:12.1: reg 10 32bit mmio: [0xd7003000-0xd7003fff]
[ 0.089704] pci 0000:00:14.0: reg 10 32bit mmio: [0xd7004000-0xd7004fff]
[ 0.089736] pci 0000:00:14.0: PME# supported from D0 D1 D3hot D3cold
[ 0.089782] pci 0000:00:14.0: PME# disabled
[ 0.089849] pci 0000:00:14.1: reg 10 32bit mmio: [0xd7005000-0xd7005fff]
[ 0.089881] pci 0000:00:14.1: PME# supported from D0 D1 D3hot D3cold
[ 0.089927] pci 0000:00:14.1: PME# disabled
[ 0.089993] pci 0000:00:14.2: reg 10 32bit mmio: [0xd7006000-0xd7006fff]
[ 0.090024] pci 0000:00:14.2: PME# supported from D0 D1 D3hot D3cold
[ 0.090071] pci 0000:00:14.2: PME# disabled
[ 0.090142] pci 0000:00:14.3: reg 10 32bit mmio: [0xd7007000-0xd70070ff]
[ 0.090176] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[ 0.090221] pci 0000:00:14.3: PME# disabled
[ 0.090321] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xd3ffffff]
[ 0.090329] pci 0000:01:00.0: reg 14 io port: [0x9000-0x90ff]
[ 0.090337] pci 0000:01:00.0: reg 18 32bit mmio: [0xd5000000-0xd5003fff]
[ 0.090356] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.090379] pci 0000:01:00.0: supports D1
[ 0.090413] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[ 0.090418] pci 0000:00:01.0: bridge 32bit mmio: [0xd4000000-0xd5ffffff]
[ 0.090424] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd0000000-0xd3ffffff]
[ 0.090434] pci_bus 0000:00: on NUMA node 0
[ 0.090462] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.120250] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 0.120917] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[ 0.121564] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[ 0.122209] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9
[ 0.123330] PCI: Using ACPI for IRQ routing
[ 0.124083] pnp: PnP ACPI init
[ 0.124169] ACPI: bus type pnp registered
[ 0.130206] pnp: PnP ACPI: found 13 devices
[ 0.130260] ACPI: ACPI bus type pnp unregistered
[ 0.130307] PnPBIOS: Disabled by ACPI PNP
[ 0.130373] system 00:00: iomem range 0xcb000-0xcbfff has been reserved
[ 0.130421] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.130470] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.130517] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 0.130565] system 00:00: iomem range 0x37ff0000-0x37ffffff could not be reserved
[ 0.130620] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.130668] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.130716] system 00:00: iomem range 0x100000-0x37feffff could not be reserved
[ 0.130768] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.130827] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.166295] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.166352] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.166399] pci 0000:00:01.0: MEM window: 0xd4000000-0xd5ffffff
[ 0.167140] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000d3ffffff
[ 0.167207] pci 0000:00:01.0: setting latency timer to 64
[ 0.167215] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.167220] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.167226] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
[ 0.167230] pci_bus 0000:01: resource 1 mem: [0xd4000000-0xd5ffffff]
[ 0.167235] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd3ffffff]
[ 0.167343] NET: Registered protocol family 2
[ 0.167560] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.168580] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.171749] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.173380] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.173433] TCP reno registered
[ 0.173732] NET: Registered protocol family 1
[ 0.173895] Trying to unpack rootfs image as initramfs...
[ 0.587844] Freeing initrd memory: 8466k freed
[ 0.614576] audit: initializing netlink socket (disabled)
[ 0.614658] type=2000 audit(1251885864.612:1): initialized
[ 0.615243] highmem bounce pool size: 64 pages
[ 0.615298] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.615476] VFS: Disk quotas dquot_6.5.2
[ 0.615581] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.615719] msgmni has been set to 1738
[ 0.616153] alg: No test for stdrng (krng)
[ 0.616387] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.616446] io scheduler noop registered
[ 0.616487] io scheduler anticipatory registered
[ 0.616529] io scheduler deadline registered
[ 0.616586] io scheduler cfq registered (default)
[ 0.616653] pci 0000:00:00.0: Applying VIA southbridge workaround
[ 0.616702] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.616750] pci 0000:00:07.0: Disabling VIA external APIC routing
[ 0.616895] pci 0000:01:00.0: Boot video device
[ 0.617641] isapnp: Scanning for PnP cards...
[ 0.668110] Switched to high resolution mode on CPU 0
[ 0.971374] isapnp: No Plug & Play device found
[ 0.978391] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.978680] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.978984] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.979797] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.980320] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.983746] brd: module loaded
[ 0.984087] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.984612] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.984667] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.985116] mice: PS/2 mouse device common for all mice
[ 0.985568] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.985654] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.985787] cpuidle: using governor ladder
[ 0.985830] cpuidle: using governor menu
[ 0.985879] No iBFT detected.
[ 0.986588] TCP cubic registered
[ 0.986671] NET: Registered protocol family 10
[ 0.987462] lo: Disabled Privacy Extensions
[ 0.988099] Mobile IPv6
[ 0.988142] NET: Registered protocol family 17
[ 0.988198] Using IPI No-Shortcut mode
[ 0.988734] registered taskstats version 1
[ 0.989068] rtc_cmos 00:04: setting system clock to 2009-09-02 10:04:25 UTC (1251885865)
[ 0.989226] Freeing unused kernel memory: 332k freed
[ 0.990321] Write protecting the kernel text: 2220k
[ 0.990419] Write protecting the kernel read-only data: 796k
[ 1.006088] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.227261] usbcore: registered new interface driver usbfs
[ 1.227477] usbcore: registered new interface driver hub
[ 1.227625] usbcore: registered new device driver usb
[ 1.232561] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.233259] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 1.233308] PCI: setting IRQ 10 as level-triggered
[ 1.233318] ehci_hcd 0000:00:14.3: PCI INT A -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 1.233405] ehci_hcd 0000:00:14.3: EHCI Host Controller
[ 1.233706] ehci_hcd 0000:00:14.3: new USB bus registered, assigned bus number 1
[ 1.256043] ehci_hcd 0000:00:14.3: debug port 1
[ 1.256119] ehci_hcd 0000:00:14.3: irq 10, io mem 0xd7007000
[ 1.268027] ehci_hcd 0000:00:14.3: USB 2.0 started, EHCI 1.00
[ 1.268123] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.268170] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.268222] usb usb1: Product: EHCI Host Controller
[ 1.268265] usb usb1: Manufacturer: Linux 2.6.30-1-686-bigmem ehci_hcd
[ 1.268310] usb usb1: SerialNumber: 0000:00:14.3
[ 1.268638] usb usb1: configuration #1 chosen from 1 choice
[ 1.268811] hub 1-0:1.0: USB hub found
[ 1.268878] hub 1-0:1.0: 6 ports detected
[ 1.284897] device-mapper: uevent: version 1.0.3
[ 1.285277] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 1.464458] Floppy drive(s): fd0 is 1.44M
[ 1.514761] FDC 0 is a post-1991 82077
[ 1.532522] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 1.532578] PCI: setting IRQ 11 as level-triggered
[ 1.532587] aty128fb 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 1.533440] aty128fb: Found Intel x86 BIOS ROM Image
[ 1.533483] aty128fb: Rage128 BIOS located
[ 1.533531] aty128fb: Rage128 RF AGP [chip rev 0x2] 16M 128-bit SDR SGRAM (1:1)
[ 1.534498] Console: switching to colour frame buffer device 80x30
[ 1.550950] fb0: ATY Rage128 frame buffer device on Rage128 RF AGP
[ 1.551381] aty128fb: Rage128 MTRR set to ON
[ 1.569451] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.569635] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 1.570049] uhci_hcd 0000:00:07.2: VIA VLink IRQ fixup, from 9 to 10
[ 1.570509] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 1.571043] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2
[ 1.572083] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000a400
[ 1.572727] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.573332] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.574584] usb usb2: Product: UHCI Host Controller
[ 1.575275] usb usb2: Manufacturer: Linux 2.6.30-1-686-bigmem uhci_hcd
[ 1.576038] usb usb2: SerialNumber: 0000:00:07.2
[ 1.576931] usb usb2: configuration #1 chosen from 1 choice
[ 1.577770] hub 2-0:1.0: USB hub found
[ 1.578588] hub 2-0:1.0: 2 ports detected
[ 1.579609] uhci_hcd 0000:00:07.3: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 1.581429] uhci_hcd 0000:00:07.3: VIA VLink IRQ fixup, from 9 to 10
[ 1.582422] uhci_hcd 0000:00:07.3: UHCI Host Controller
[ 1.583452] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 3
[ 1.585544] uhci_hcd 0000:00:07.3: irq 10, io base 0x0000a800
[ 1.586729] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.587874] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.590198] usb usb3: Product: UHCI Host Controller
[ 1.591357] usb usb3: Manufacturer: Linux 2.6.30-1-686-bigmem uhci_hcd
[ 1.592543] usb usb3: SerialNumber: 0000:00:07.3
[ 1.593814] usb usb3: configuration #1 chosen from 1 choice
[ 1.595011] hub 3-0:1.0: USB hub found
[ 1.596180] hub 3-0:1.0: 2 ports detected
[ 1.622206] Uniform Multi-Platform E-IDE driver
[ 1.642519] 8139too Fast Ethernet driver 0.9.28
[ 1.685548] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.705537] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 1.706667] 8139too 0000:00:0b.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 1.710358] eth0: RealTek RTL8139 at 0xb800, 00:c0:26:84:6a:3f, IRQ 10
[ 1.711501] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 1.711594] ohci_hcd 0000:00:14.0: PCI INT B -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 1.713915] ohci_hcd 0000:00:14.0: OHCI Host Controller
[ 1.715141] ohci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.717509] ohci_hcd 0000:00:14.0: irq 11, io mem 0xd7004000
[ 1.780366] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.781598] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.783891] usb usb4: Product: OHCI Host Controller
[ 1.785135] usb usb4: Manufacturer: Linux 2.6.30-1-686-bigmem ohci_hcd
[ 1.786317] usb usb4: SerialNumber: 0000:00:14.0
[ 1.787618] usb usb4: configuration #1 chosen from 1 choice
[ 1.788864] hub 4-0:1.0: USB hub found
[ 1.790011] hub 4-0:1.0: 2 ports detected
[ 1.791607] 8139too 0000:00:11.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 1.795310] eth1: RealTek RTL8139 at 0xc400, 00:c0:26:84:3e:af, IRQ 11
[ 1.796566] eth1: Identified 8139 chip type 'RTL-8100B/8139D'
[ 1.822601] via82cxxx 0000:00:07.1: VIA vt82c686b (rev 40) IDE UDMA100
[ 1.823819] via82cxxx 0000:00:07.1: IDE controller (0x1106:0x0571 rev 0x06)
[ 1.825109] via82cxxx 0000:00:07.1: not 100% native mode: will probe irqs later
[ 1.827429] ide0: BM-DMA at 0xa000-0xa007
[ 1.828714] ide1: BM-DMA at 0xa008-0xa00f
[ 1.829887] Probing IDE interface ide0...
[ 2.116314] hda: SAMSUNG SP0842N, ATA DISK drive
[ 2.452190] hdb: WDC WD136BA, ATA DISK drive
[ 2.453486] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 2.465994] hda: UDMA/100 mode selected
[ 2.482666] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 2.483318] hdb: UDMA/66 mode selected
[ 2.485090] Probing IDE interface ide1...
[ 3.220236] hdc: R/RW 8x4x32, ATAPI CD/DVD-ROM drive
[ 4.060044] hdd: ASUS CD-S450/A, ATAPI CD/DVD-ROM drive
[ 4.061252] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 4.061553] hdc: MWDMA2 mode selected
[ 4.062880] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 4.063002] hdd: UDMA/33 mode selected
[ 4.064231] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.065332] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.067195] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 4.068271] PCI: setting IRQ 5 as level-triggered
[ 4.068281] ohci_hcd 0000:00:14.1: PCI INT C -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 4.070297] ohci_hcd 0000:00:14.1: OHCI Host Controller
[ 4.071401] ohci_hcd 0000:00:14.1: new USB bus registered, assigned bus number 5
[ 4.073454] ohci_hcd 0000:00:14.1: irq 5, io mem 0xd7005000
[ 4.130071] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.131162] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.133272] usb usb5: Product: OHCI Host Controller
[ 4.134320] usb usb5: Manufacturer: Linux 2.6.30-1-686-bigmem ohci_hcd
[ 4.135361] usb usb5: SerialNumber: 0000:00:14.1
[ 4.136577] usb usb5: configuration #1 chosen from 1 choice
[ 4.137665] hub 5-0:1.0: USB hub found
[ 4.138688] hub 5-0:1.0: 2 ports detected
[ 4.140096] ohci_hcd 0000:00:14.2: PCI INT D -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 4.142146] ohci_hcd 0000:00:14.2: OHCI Host Controller
[ 4.143264] ohci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 6
[ 4.145424] ohci_hcd 0000:00:14.2: irq 10, io mem 0xd7006000
[ 4.175544] SCSI subsystem initialized
[ 4.224586] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.225756] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.227987] usb usb6: Product: OHCI Host Controller
[ 4.229185] usb usb6: Manufacturer: Linux 2.6.30-1-686-bigmem ohci_hcd
[ 4.230344] usb usb6: SerialNumber: 0000:00:14.2
[ 4.231686] usb usb6: configuration #1 chosen from 1 choice
[ 4.232955] hub 6-0:1.0: USB hub found
[ 4.234118] hub 6-0:1.0: 2 ports detected
[ 4.292253] libata version 3.00 loaded.
[ 4.312466] ide-gd driver 1.18
[ 4.313655] hda: max request size: 512KiB
[ 4.336810] ide-cd driver 5.00
[ 4.338034] hda: Host Protected Area detected.
[ 4.338037] current capacity is 66055248 sectors (33820 MB)
[ 4.338039] native capacity is 156301488 sectors (80026 MB)
[ 4.342072] hda: Host Protected Area disabled.
[ 4.343139] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
[ 4.349762] hda: cache flushes supported
[ 4.350982] hda: hda1 hda2 hda3 hda4 < hda5 hda6 >
[ 4.371890] hdb: max request size: 128KiB
[ 4.392875] hdb: 26712000 sectors (13676 MB) w/2048KiB Cache, CHS=26500/16/63
[ 4.394139] hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 hdb9 >
[ 4.460316] ide-cd: hdc: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache
[ 4.461452] Uniform CD-ROM driver Revision: 3.20
[ 4.474888] ide-cd: hdd: ATAPI 45X CD-ROM drive, 128kB Cache
[ 5.753889] PM: Starting manual resume from disk
[ 5.864523] kjournald starting. Commit interval 5 seconds
[ 5.865651] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.258370] udev: starting version 141
[ 8.456482] Marking TSC unstable due to TSC halts in idle
[ 8.458796] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 8.459988] processor ACPI_CPU:00: registered as cooling_device0
[ 8.461187] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 8.464216] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 8.466517] ACPI: Power Button [PWRF]
[ 8.467756] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 8.470092] ACPI: Power Button [PWRB]
[ 8.471338] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 8.473627] ACPI: Sleep Button [SLPB]
[ 8.555863] parport_pc: VIA 686A/8231 detected
[ 8.555870] parport_pc: probing current configuration
[ 8.555890] parport_pc: Current parallel port base: 0x378
[ 8.555939] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 8.652309] parport_pc: VIA parallel port: io=0x378, irq=7
[ 8.754539] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.788334] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.898415] gameport: EMU10K1 is pci0000:00:0d.1/gameport0, io 0xc000, speed 1242kHz
[ 9.761445] Linux video capture interface: v2.00
[ 9.773901] hda: UDMA/100 mode selected
[ 9.843972] hda: cache flushes supported
[ 9.845292] hdc: MWDMA2 mode selected
[ 9.848222] hdd: UDMA/33 mode selected
[ 10.322232] bttv: driver version 0.9.18 loaded
[ 10.323363] bttv: using 4 buffers with 2080k (520 pages) each for capture
[ 10.324595] bttv: Bt8xx card found (0).
[ 10.325742] bttv 0000:00:12.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
[ 10.327997] bttv0: Bt878 (rev 17) at 0000:00:12.0, irq: 5, latency: 32, mmio: 0xd7002000
[ 10.394268] bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
[ 10.396721] bttv0: using: Pinnacle PCTV Studio/Rave [card=39,insmod option]
[ 10.397920] IRQ 5/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 10.399160] bttv0: gpio: en=00000000, out=00000000 in=00fff3ff [init]
[ 10.399277] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[ 10.417911] bttv0: pinnacle/mt: id=4 info="PAL+SECAM / mono" radio=no
[ 10.419109] bttv0: tuner type=33
[ 10.515671] hdb: UDMA/66 mode selected
[ 10.620117] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[ 10.681257] tuner 1-0043: chip found @ 0x86 (bt878 #0 [sw])
[ 10.761441] tda9887 1-0043: creating new instance
[ 10.762667] tda9887 1-0043: tda988[5/6/7] found
[ 11.155642] Chip ID is not zero. It is not a TEA5767
[ 11.157122] tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw])
[ 11.184362] mt20xx 1-0060: microtune: companycode=4d54 part=04 rev=04
[ 11.288762] mt20xx 1-0060: microtune MT2032 found, OK
[ 11.365662] bttv0: audio absent, no audio device found!
[ 11.366989] bttv0: registered device video0
[ 11.368236] bttv0: registered device vbi0
[ 11.369371] bttv0: PLL: 28636363 => 35468950 .. ok
[ 11.406890] EMU10K1_Audigy 0000:00:0d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 12.068133] hdb: UDMA/66 mode selected
[ 12.092127] hda: UDMA/100 mode selected
[ 12.120213] hda: cache flushes supported
[ 12.165446] hdc: MWDMA2 mode selected
[ 12.208330] hdd: UDMA/33 mode selected
[ 12.351889] Adding 522040k swap on /dev/hda6. Priority:-1 extents:1 across:522040k
[ 12.355495] Adding 714852k swap on /dev/hdb7. Priority:-2 extents:1 across:714852k
[ 12.602955] EXT3 FS on hdb1, internal journal
[ 13.978952] kjournald starting. Commit interval 5 seconds
[ 13.999494] EXT3 FS on hdb9, internal journal
[ 14.000643] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.032326] kjournald starting. Commit interval 5 seconds
[ 14.053019] EXT3 FS on hdb5, internal journal
[ 14.144687] REISERFS (device hdb6): found reiserfs format "3.6" with standard journal
[ 14.147123] REISERFS (device hdb6): using ordered data mode
[ 14.152676] REISERFS (device hdb6): journal params: device hdb6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30,
max trans age 30
[ 14.160288] REISERFS (device hdb6): checking transaction log (hdb6)
[ 14.229271] REISERFS (device hdb6): Using r5 hash to sort names
[ 17.421238] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 29.428280] lp0: using parport0 (interrupt-driven).
[ 29.458355] ppdev: user-space parallel port driver
[ 31.490785] eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 32.714459] Linux agpgart interface v0.103
[ 32.805627] [drm] Initialized drm 1.1.0 20060810
[ 32.829395] [drm] Initialized r128 2.5.0 20030725 for 0000:01:00.0 on minor 0
[ 32.838077] vmap allocation for size 134221824 failed: use vmalloc=<size> to increase size.La mémoire:
cat /proc/meminfo
MemTotal: 904812 kB
MemFree: 579960 kB
Buffers: 19372 kB
Cached: 193972 kB
SwapCached: 0 kB
Active: 146972 kB
Inactive: 148656 kB
Active(anon): 84432 kB
Inactive(anon): 8 kB
Active(file): 62540 kB
Inactive(file): 148648 kB
Unevictable: 8 kB
Mlocked: 8 kB
HighTotal: 14280 kB
HighFree: 140 kB
LowTotal: 890532 kB
LowFree: 579820 kB
SwapTotal: 1236892 kB
SwapFree: 1236892 kB
Dirty: 724 kB
Writeback: 0 kB
AnonPages: 82304 kB
Mapped: 49468 kB
Slab: 15480 kB
SReclaimable: 10364 kB
SUnreclaim: 5116 kB
PageTables: 3048 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 1689296 kB
Committed_AS: 285092 kB
VmallocTotal: 131072 kB
VmallocUsed: 21552 kB
VmallocChunk: 104564 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
DirectMap4k: 6136 kB
DirectMap2M: 897024 kBEt également au niveau de dmesg, je ne comprends pas ceci:
dmesg | grep 'TLB'
[ 0.615298] HugeTLB registered 2 MB page size, pre-allocated 0 pagesSi la pré-allocation n'est pas possible comment faire pour qu'il disparaisse de dmesg.
Le Grub :
title Debian GNU/Linux, kernel 2.6.30-1-686
root (hd1,0)
kernel /boot/vmlinuz-2.6.30-1-686 root=/dev/hdb1 vmalloc=131072KB nolapic ro
initrd /boot/initrd.img-2.6.30-1-686Voilà tout mes soucis sur ma vielle bécane figure sur ce post, merci pour vos lumières. Si des infos supplémentaires sont requises, je les posts dès que possible.
Dernière modification par tux4fun (Le 02/09/2009, à 13:05)
tux4fun
http://linuxcounter.net/ - http://frederick.varin.free.fr
Linux Registered User #363458
Machine Registered #261921
Hors ligne