Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 08/05/2006, à 19:27

marco29

( abandonné ) nvidia tv out -warning dans Xorg.log

salut,
je voudrai installer une sortie tv, apres plusieurs essais infructueux
je viens de voir des (ww) dans Xorg.0.log
j'ai suivi le tuto http://doc.ubuntu-fr.org/materiel/nvidia_tvout?s=sortie
j'oublie surement quelque chose mais je ne sais pas quoi ni où
un peu d'aide serait la bienvenue


X Window System Version 6.8.2 (Ubuntu 6.8.2-77.1 20060503192905 root@terranova.warthogs.hbd.com)
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.12 i686 [ELF]
Current Operating System: Linux ISA 2.6.12-10-686 #1 Fri Apr 28 13:21:56 UTC 2006 i686
Build Date: 03 May 2006
    Before reporting problems, check http://wiki.X.Org
    to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.6.12-10-686 (buildd@terranova) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8.1)) #1 Fri Apr 28 13:21:56 UTC 2006 T
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon May  8 22:30:49 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Basic Layout"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Écran générique"
(**) |   |-->Device "Device0"
(**) |-->Screen "Screen1" (1)
(**) |   |-->Monitor "Television"
(**) |   |-->Device "Device1"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
    Entry deleted from font path.
(WW) The directory "/usr/share/X11/fonts/CID" does not exist.
    Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID").


Plus loin,

(WW) NVIDIA(0): No size information available in CRT-0's EDID; cannot compute
(WW) NVIDIA(0):     DPI from EDID.

et à la fin,

Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0

Dernière modification par marco29 (Le 10/06/2006, à 17:57)

Hors ligne

#2 Le 11/05/2006, à 09:48

shaddy

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

c'est quoi le problème ? j'imagine que la sortie TV ne marche pas.
Dis nous plus simplement ce que tu as fait, quel est ton matos et montre ton xorg.conf


www.villardnoir.eu/index.php

Hors ligne

#3 Le 11/05/2006, à 22:42

marco29

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

exactement, pas de sortie TV 

OS: Linux ISA 2.6.12-10-686
cpu : pentium III  à 550
carte : GeForce2 MX 100 DDR/200 DDR
driver : NVIDIA-Linux-x86-1.0-8756-pkg1.run
que du materiel de pointe wink

ce que j'ai fait c'est suivre les differents tutos :

http://forum.ubuntu-fr.org/viewtopic.php?id=38420
http://forum.ubuntu-fr.org/viewtopic.php?id=10177
http://forum.ubuntu-fr.org/viewtopic.php?id=2403
http://doc.ubuntu-fr.org/materiel/nvidia_tvout?s=sortie
http://doc.ubuntu-fr.org/materiel/nvidia
http://doc.ubuntu-fr.org/materiel/nvidia.run
http://forum.ubuntu-fr.org/viewtopic.php?id=36833
http://download.nvidia.com/XFree86/Linux-x86/1.0-8756/README/index.html
et d'autres encore puisque j'en ai fait des mix

mon Xorg.conf est fontionnel, il n'y a plus de TV dessus, et je l'ai modifié tellement de fois que je ne sais vraiment plus que faire

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Wed Mar 29 14:43:26 PST 2006

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Basic Layout"
    Screen      0  "Screen0" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "Files"

        # paths to defoma fonts
    FontPath        "/usr/share/X11/fonts/misc"
    FontPath        "/usr/share/X11/fonts/cyrillic"
    FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/Type1"
    FontPath        "/usr/share/X11/fonts/CID"
    FontPath        "/usr/share/X11/fonts/100dpi"
    FontPath        "/usr/share/X11/fonts/75dpi"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
    Load           "extmod"
    Load           "freetype"
    Load           "glx"
    Load           "int10"
    Load           "type1"
    Load           "vbe"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "fr"
    Option         "XkbVariant" "latin9"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ImPS/2"
    Option         "Emulate3Buttons" "true"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "Monitor"

#CRT
    Identifier     "Monitor"
    HorizSync       28.0 - 64.0
    VertRefresh     43.0 - 60.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    Screen          0
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor"
    DefaultDepth    24
    Option         "NoLogo" "true"
    Option         "RenderAccel" "true"
    SubSection     "Display"
        Depth       1
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       4
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       8
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       15
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
EndSection

dans Xorg.O.log j'ai toujours :

(WW) NVIDIA(0): No size information available in CRT-0's EDID; cannot compute
(WW) NVIDIA(0):     DPI from EDID.

et cà qui me questionne aussi

(--) NVIDIA(0): Connected display device(s) on GeForce2 MX 100/200 at
(--) NVIDIA(0):     PCI:1:0:0:
(--) NVIDIA(0):     AcerView (CRT-0)
(--) NVIDIA(0):     Brooktree 869 TV Encoder (TV-0)
(--) NVIDIA(0): AcerView (CRT-0): 350 MHz maximum pixel clock
(--) NVIDIA(0): Brooktree 869 TV Encoder (TV-0): 165 MHz maximum pixel clock
(--) NVIDIA(0): TV encoder: Brooktree 869

il ya un encoder TV !
Donc je me demande si je ne rate pas une étape de base,

avec Twinview les 2 sorties devraient fonctionner au demarage de X ?

avec NVidia TV-Out peut-on faire quelque chose du genre détection, essais?

Donc la solution est simple je voudrais voir ma TV dans les devices du NVidia X serveur settings , ou ailleurs,  pour commencer se serai bien

y -a-t'il un moyen de verifier la carte ou/et la connection ?

Dernière modification par marco29 (Le 11/05/2006, à 22:48)

Hors ligne

#4 Le 16/05/2006, à 13:08

shaddy

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

il manque des choses à la fin de ton xorg.conf.
section server layout.

Met ton xorg.conf avec la TV pour qu'on voit le problème.
Les erreurs indiquées dans les log ne semblent pas graves, ce n'est pas ça le problème (je parle des erreurs indiquées dans le premier message).


www.villardnoir.eu/index.php

Hors ligne

#5 Le 16/05/2006, à 20:39

marco29

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

voici mon Xorg.conf
la section serveur layout est la 1ere

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Wed Mar 29 14:43:26 PST 2006

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Basic Layout"
    Screen      0  "Screen0"
    Screen 1       "Screen1" rightof "Screen1"
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "Files"

        # paths to defoma fonts
    FontPath        "/usr/share/X11/fonts/misc"
    FontPath        "/usr/share/X11/fonts/cyrillic"
    FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/Type1"
    FontPath        "/usr/share/X11/fonts/CID"
    FontPath        "/usr/share/X11/fonts/100dpi"
    FontPath        "/usr/share/X11/fonts/75dpi"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
    Load           "extmod"
    Load           "freetype"
    Load           "glx"
    Load           "int10"
    Load           "type1"
    Load           "vbe"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "fr"
    Option         "XkbVariant" "latin9"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ImPS/2"
    Option         "Emulate3Buttons" "true"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "Monitor"

#CRT
    Identifier     "Monitor"
    HorizSync       28.0 - 64.0
    VertRefresh     43.0 - 60.0
    Option         "DPMS"
EndSection

Section "Monitor"
  #TV
        Identifier "Television"
        HorizSync 60
        VertRefresh 30-150
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    Screen          0
        Option  "NoLogo"        "true"
        Option  "RenderAccel"   "true"
        BusID   "PCI:01:0:0"
EndSection

Section "Device"
        Identifier      "Device1"
        Driver "nvidia"
        Screen 1
        Option  "TVOutFormat" "SVIDEO"
        Option  "TVStandard" "PAL-N"
        Option  "ConnectedMonitor" "Television"
        BusID   "PCI:01:0:0"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor"
    DefaultDepth    24
   # Option         "NoLogo" "true"
   # Option         "RenderAccel" "true"
    SubSection     "Display"
        Depth       1
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       4
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       8
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       15
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
EndSection

Section "Screen"
        Identifier      "Screen1"
        Device          "Device1"
        Monitor         "Television"
        DefaultDepth    24
        SubSection "Display"
                Depth 24
                Modes "640x480"
        EndSubSection
EndSection

et voici les warning du log

(WW) NVIDIA(1): There are only 1 CRTCs available, trimming display device list
(WW) NVIDIA(1):     from "TV-0" to "".
(II) NVIDIA(1): Assigned Display Device:
(WW) NVIDIA(1): No valid modes for "640x480"; removing.
(WW) NVIDIA(1):
(WW) NVIDIA(1): Unable to validate any modes; falling back to the default mode
(WW) NVIDIA(1):     "nvidia-auto-select".
(WW) NVIDIA(1):
(WW) NVIDIA(1): No valid modes for "nvidia-auto-select"; removing.

j'espere que tu pourra en tirer quelque chose

Hors ligne

#6 Le 17/05/2006, à 22:29

bob29

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

salut a toi

j'ai reussi a activer ma sortie tv grace a ça sa pourra peut etre t'aider

http://www.trustonme.net/didactels/261.html

voila bon courage


RHAAAAAAAAAAAA!!!!!!!!!!!
a mort windaube
Proverbe Thaïlandais:Pingouins dans les champs,
hiver très méchant.

Hors ligne

#7 Le 18/05/2006, à 13:33

shaddy

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

Conseil : efface tout (ou sauvegarde ce xorg.conf.
et suis le tuto http://doc.ubuntu-fr.org/materiel/nvidia_tvout
en utilisant twinview. Déjà on va voir si ça ça marche, car toi tu as utilisé l'autre technique.
L'autre technique est vraiment particulière et ce n'est pas sûr qu'elle marche sur toutes les cartes. Twinview c'est plus simple.


www.villardnoir.eu/index.php

Hors ligne

#8 Le 18/05/2006, à 22:04

marco29

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

avec TV-Out j'ai ça

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Wed Mar 29 14:43:26 PST 2006

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Basic Layout"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen0" RightOf "Screen1"
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "Files"

        # paths to defoma fonts
    FontPath        "/usr/share/X11/fonts/misc"
    FontPath        "/usr/share/X11/fonts/cyrillic"
    FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/Type1"
    FontPath        "/usr/share/X11/fonts/CID"
    FontPath        "/usr/share/X11/fonts/100dpi"
    FontPath        "/usr/share/X11/fonts/75dpi"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
    Load           "extmod"
    Load           "freetype"
    Load           "glx"
    Load           "int10"
    Load           "type1"
    Load           "vbe"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "fr"
    Option         "XkbVariant" "latin9"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ImPS/2"
    Option         "Emulate3Buttons" "true"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "Monitor"

 #CRT
    Identifier     "Monitor"
    HorizSync       28.0 - 64.0
    VertRefresh     43.0 - 60.0
    Option         "DPMS"
EndSection

Section "Monitor"

  #TV
    Identifier     "TV"
    HorizSync       30.0 - 50.0
    VertRefresh     60.0 - 60.0
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    BusID          "PCI:01:0:0"
    Screen          0
EndSection

Section "Device"
   Identifier     "Device1"
   Driver         "nvidia"
   BusID          "PCI:01:00.0"
   Screen          1
EndSection

Section "Screen"

   # Option         "NoLogo" "true"
   # Option         "RenderAccel" "true"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor"
    DefaultDepth    24
    Option         "NoLogo" "true"
    Option         "RenderAccel" "true"
    SubSection     "Display"
        Depth       1
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       4
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       8
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       15
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "TV"
    DefaultDepth    24
    Option         "TVOutFormat" "SVIDEO"
    Option         "TVStandard" "PAL-N"
    Option         "ConnectedMonitor" "TV"
    Option         "DPMS"
    SubSection     "Display"
        Depth       24
        Modes      "640x480"
        Option         "TVStandard" "PAL-N"
    EndSubSection
EndSection

et dans le log


marc@ISA:~$ cat /var/log/Xorg.0.log | grep "(EE)"
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(EE) Screen Screen1 doesn't exist: deleting placement

marc@ISA:~$ cat /var/log/Xorg.0.log | grep "(WW)"
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
(WW) The directory "/usr/share/X11/fonts/CID" does not exist.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID".
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(WW) NVIDIA: More than one matching Device section for instances
(WW) NVIDIA(0): No size information available in CRT-0's EDID; cannot compute
(WW) NVIDIA(0):     DPI from EDID.

ok avec twinview j'ai ça

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Wed Mar 29 14:43:26 PST 2006

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Basic Layout"
    Screen      0  "Screen0" 0 0
 #   Screen      1  "Screen0" RightOf "Screen1"
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "Files"

        # paths to defoma fonts
    FontPath        "/usr/share/X11/fonts/misc"
    FontPath        "/usr/share/X11/fonts/cyrillic"
    FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/Type1"
    FontPath        "/usr/share/X11/fonts/CID"
    FontPath        "/usr/share/X11/fonts/100dpi"
    FontPath        "/usr/share/X11/fonts/75dpi"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
    Load           "extmod"
    Load           "freetype"
    Load           "glx"
    Load           "int10"
    Load           "type1"
    Load           "vbe"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "fr"
    Option         "XkbVariant" "latin9"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ImPS/2"
    Option         "Emulate3Buttons" "true"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "Monitor"

 #CRT
    Identifier     "Monitor"
    HorizSync       28.0 - 64.0
    VertRefresh     43.0 - 60.0
    Option         "DPMS"
EndSection

#Section "Monitor"

  #TV
#    Identifier     "TV"
#    HorizSync       30.0 - 50.0
#    VertRefresh     60.0 - 60.0
#EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    BusID          "PCI:01:0:0"
    Screen          0
 	Option "TwinView"
	Option "SecondMonitorHorizSync" "30-50"
	Option "SecondMonitorVertRefresh" "60"
	Option "MetaModes" "1280x1024, 1280x1024; 1024x768, 1024x768; 800x600, 800x600; 640x480, 640x480;"
	Option "TVStandard" "PAL-N" 

EndSection

#Section "Device"
#   Identifier     "Device1"
#   Driver         "nvidia"
#   BusID          "PCI:01:00.0"
#   Screen          1
#EndSection

Section "Screen"

   # Option         "NoLogo" "true"
   # Option         "RenderAccel" "true"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor"
    DefaultDepth    24
    Option         "NoLogo" "true"
    Option         "RenderAccel" "true"
    SubSection     "Display"
        Depth       1
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       4
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       8
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       15
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1280x1024" "1024x768" "832x624" "800x600" "640x480"
    EndSubSection
EndSection

#Section "Screen"
#    Identifier     "Screen1"
#    Device         "Device1"
#    Monitor        "TV"
#    DefaultDepth    24
#    Option         "TVOutFormat" "SVIDEO"
#    Option         "TVStandard" "PAL-N"
#    Option         "ConnectedMonitor" "TV"
#    Option         "DPMS"
#    SubSection     "Display"
#        Depth       24
#        Modes      "640x480"
#        Option         "TVStandard" "PAL-N"
#    EndSubSection
#EndSection

et dans le log

cat /var/log/Xorg.0.log | grep "(WW)"
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
(WW) The directory "/usr/share/X11/fonts/CID" does not exist.
(WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID".
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(WW) NVIDIA(0): There are only 1 CRTCs available, trimming display device list
(WW) NVIDIA(0):     from "CRT-0, TV-0" to "CRT-0".
(WW) NVIDIA(0): TwinView requested, but only 1 display devices found.
(WW) NVIDIA(0): Invalid display device in Mode Description "1280x1024"
(WW) NVIDIA(0): Not using mode description "1280x1024"; unable to map to
(WW) NVIDIA(0):     display device
(WW) NVIDIA(0): Invalid display device in Mode Description "1024x768"
(WW) NVIDIA(0): Not using mode description "1024x768"; unable to map to
(WW) NVIDIA(0):     display device
(WW) NVIDIA(0): Invalid display device in Mode Description "800x600"
(WW) NVIDIA(0): Not using mode description "800x600"; unable to map to display
(WW) NVIDIA(0):     device
(WW) NVIDIA(0): Invalid display device in Mode Description "640x480"
(WW) NVIDIA(0): Not using mode description "640x480"; unable to map to display
(WW) NVIDIA(0):     device
(WW) NVIDIA(0): No size information available in CRT-0's EDID; cannot compute
(WW) NVIDIA(0):     DPI from EDID.

je pense que dans les deux cas il y a quelque chose de similaire:
avec 2 écrans
(EE) Screen Screen1 doesn't exist: deleting placement
et avec Twinwiew
(WW) NVIDIA(0): There are only 1 CRTCs available, trimming display device list
dans les deux configuration où est ma TV?

mais je ne sais que faire

Dernière modification par marco29 (Le 19/05/2006, à 10:49)

Hors ligne

#9 Le 19/05/2006, à 12:05

shaddy

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

non mais attends, il y a quelque chose qui cloche. Normalement, avec twinview tu n'as pas deux sections device et screen et tout. Et là tu as toujours deux sections screen.
Montre le nouveau xorg.conf.
Et quand tu dis "avec tv-out" j'ai ça, c'est quoi tv-out ?
Le tuto présente deux choses, la première c'est l'utilisation de twinview. La deuxième chose c'est une "méthode plus complexe".
Twinview c'est hyper simple ce sont juste des options speciales qu'on rajoute dans la section device. Donc je comprends pas comment, en suivant le tuto de twinview, tu te retrouves avec un xorg.conf comme ça.
Ok si, je comprends, enfin je crois. Est-ce que tu as bien effacé ton xorg.conf et est-ce que tu as fais après nvidia-glx-config pour en générer un nouveau tout propre ?


www.villardnoir.eu/index.php

Hors ligne

#10 Le 19/05/2006, à 18:14

marco29

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

TV-out  c'est la methode plus complexe
j'ai mis # devant la deuxieme section device donc elle n'est pas prise en compte sans avoir à effacer et je n'ai pas fait  nvidia-glx-config après

Hors ligne

#11 Le 20/05/2006, à 10:30

shaddy

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

Il faut rajouter : 

Option "TwinView" "true"
Option "TwinViewOrientation" "Clone"Option "
TVOutFormat" "COMPOSITE" (ou "S-VIDEO")

Sinon c'est pas un problème de mettre des #. Mais je te conseillais juste d'effacer ton xorg de faire dpkg-reconfigure -phigh xserver-xorg puis nvidia-glx-config enable juste pour revenir à un truc tout frais. Parce que xorg.conf c'est prise de tête au bout d'un moment et c'est bien de tout reprendre à 0. Mais bon, là avec les options à rajouter ça devrait aller.


www.villardnoir.eu/index.php

Hors ligne

#12 Le 20/05/2006, à 16:00

marco29

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

j'ai fait un peu de ménage
donc avant  d'essayer twinview le log est propre
mais après c'est différent

mon xorg.conf

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Wed Mar 29 14:43:26 PST 2006

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
    RgbPath         "/usr/X11R6/lib/X11/rgb"
	# Paths to defoma fonts
FontPath	"/usr/share/X11/fonts/75dpi"
FontPath	"/usr/share/X11/fonts/100dpi"
FontPath	"/usr/share/X11/fonts/misc"
FontPath	"/usr/share/X11/fonts/Type1"
FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
    Load           "int10"
    Load           "vbe"
    Load           "record"
    Load           "xtrap"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "true"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option	   "XkbRules" "xorg"
    Option	   "XkbModel" "pc105"
    Option	   "XkbLayout" "fr"
    Option	   "XkbVariant" "latin9"
EndSection

Section "Monitor"
    Identifier     "Monitor0" #CRT
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       30.0 - 110.0
    VertRefresh     50.0 - 150.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
        Option  "NoLogo"        "true"
        Option  "RenderAccel"   "true"
        BusID   "PCI:01:00:0"
Option "TwinView" "true"
Option "TwinViewOrientation" "Clone"
Option "TVOutFormat" "SVIDEO"
Option "TVStandard" "PAL-N"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
Option "MetaModes" "1280x1024,1280x1024;1024x768,1024x768;800x600,800x600;640x480,640x480;512x384,512x384"
EndSection


Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

et mon log

marc@ISA:~$ cat /var/log/Xorg.0.log | grep "(WW)"
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) NVIDIA(0): There are only 1 CRTCs available, trimming display device list
(WW) NVIDIA(0):     from "CRT-0, TV-0" to "CRT-0".
(WW) NVIDIA(0): TwinView requested, but only 1 display devices found.
(WW) NVIDIA(0): Invalid display device in Mode Description "1280x1024"
(WW) NVIDIA(0): Not using mode description "1280x1024"; unable to map to
(WW) NVIDIA(0):     display device
(WW) NVIDIA(0): Invalid display device in Mode Description "1024x768"
(WW) NVIDIA(0): Not using mode description "1024x768"; unable to map to
(WW) NVIDIA(0):     display device
(WW) NVIDIA(0): Invalid display device in Mode Description "800x600"
(WW) NVIDIA(0): Not using mode description "800x600"; unable to map to display
(WW) NVIDIA(0):     device
(WW) NVIDIA(0): Invalid display device in Mode Description "640x480"
(WW) NVIDIA(0): Not using mode description "640x480"; unable to map to display
(WW) NVIDIA(0):     device
(WW) NVIDIA(0): Invalid display device in Mode Description "512x384"
(WW) NVIDIA(0): Not using mode description "512x384"; unable to map to display
(WW) NVIDIA(0):     device
(WW) NVIDIA(0): No size information available in CRT-0's EDID; cannot compute
(WW) NVIDIA(0):     DPI from EDID.

pourquoi il une trouve pas la tv?

Hors ligne

#13 Le 20/05/2006, à 17:05

shaddy

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

Option "ConnectedMonitor" "Television"

Plus tu rajoute une section monitor avec comme identifiant "Television"
et les lignes comme ça.
Section "Monitor"
        Identifier "Television"
VendorName "unknown"
ModelName "unknown"
#Option "DPMS" "true"
HorizSync 30.0 - 82.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 70.0
#Resolutions ecrans TV standard ntsc
ModeLine "720x480" 26.7 720 736 808 896 480 481 484 497
ModeLine "720x576" 32.7 720 744 816 912 576 577 580 597
ModeLine "848x480" 31.5 848 864 952 1056 480 481 484 497
ModeLine "856x480" 31.7 856 872 960 1064 480 481 484 497
ModeLine "1024x512" 41.3 1024 1056 1160 1296 512 513 516 531
ModeLine "1280x768" 80.1 1280 1344 1480 1680 768 769 772 795
ModeLine "1440x1050" 126.2 1440 1536 1688 1936 1050 1051 1054 1087
#Resolutions ecrans TV standard Pal
Modeline "640x480x50" 20.20 640 656 800 800 480 482 483 505 # 20 MHz, 25.2 kHz, 50.0 Hz
Modeline "800x600x50" 33.1584 800 840 986 1056 600 601 605 628
Modeline "720x576x50" 27.15 720 736 880 896 576 578 579 606 # 27 MHz, 30.3 kHz, 50.0 Hz
Modeline "768x576x50" 29.09 768 792 936 960 576 578 579 606 # 29 MHz, 30.3 kHz, 50.0 Hz
Modeline "1024x768x50" 44.80 1024 1056 1200 1280 768 770 772 808 # 45 MHz, 35.0 kHz, 43.3 Hz
#Resolutions ecrans generique
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 #60Hz
Modeline "800x600" 40.12 800 848 968 1056 600 601 605 628 #60Hz
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
Modeline "1024x768" 85 1024 1056 1152 1360 768 784 787 823
ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace
Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908
Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908
Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync
Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
Endsection

Dernière modification par shaddy (Le 20/05/2006, à 17:06)


www.villardnoir.eu/index.php

Hors ligne

#14 Le 20/05/2006, à 17:07

shaddy

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

et puis elle est reliée comme au PC ta TV ?


www.villardnoir.eu/index.php

Hors ligne

#15 Le 20/05/2006, à 17:33

marco29

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

par cable svideo

je rajoute tout çà? et où tu l'as trouvé?

Hors ligne

#16 Le 20/05/2006, à 17:52

shaddy

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

Où je l'ai trouvé ?!! Ahahah mon coco ! Mais ça je ne te le dirai jamais ! J'emmenerai avec moi ce brûlant secret jusque dans ma tombe et si l'on me déterre, crois moi, je maudirai pendant 1000 ans ces vils profanateurs ! Moi révéler mes secrets, les lignes de code durement acquises au cours de mes périples sur Internet, mes voyages au Japon et à la sueur de mon front ? Jamais !
hum hum... bon ahem
je les ai trouvé sur le forum tongue enfin je crois
Oui, mets les toutes. Et après tu regardes dans les log de xorg et tu verras que certains ne fonctionnent pas avec ton matériel. Tu pourras alors enlever tout ceux qui ne marchent. Ou les laisser après tout pourquoi s'emmerder, de toute façon les lignes qui ne marchent pas sont ignorées alors voilà tu les gardes pour toutes les avoir le jour où tu en auras besoin.

Et tu as bien essayé de remplacer COMPOSITE par S-VIDEO dans les Options ?


www.villardnoir.eu/index.php

Hors ligne

#17 Le 20/05/2006, à 17:53

shaddy

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

euh je voulais dire mettre COMPOSITE a la place de SVIDEO. Chez moi j'utilise une sortie SVIDEO, mais ça ne marche qu'avec l'option COMPOSITE....
l'informatique des fois...


www.villardnoir.eu/index.php

Hors ligne

#18 Le 20/05/2006, à 18:37

marco29

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

ben voila pas mieux

marc@ISA:~$ cat /var/log/Xorg.0.log | grep "(WW)"
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) NVIDIA(0): Invalid ConnectedMonitor string token: "Television";
(WW) NVIDIA(0):     discarding token.
(WW) NVIDIA(0): There are only 1 CRTCs available, trimming display device list
(WW) NVIDIA(0):     from "CRT-0, TV-0" to "CRT-0".
(WW) NVIDIA(0): TwinView requested, but only 1 display devices found.

la suite est identique idem si je mets COMPOSITE

j'ai aussi installé NVTV et là avec un affichage 800x600 j'ai ce qu'ils appellent un dual screen ou shared view et twinview off
je peux donc voir mon écran à la tv mais pourquoi en ligne de comande çà ne marche pas ? interferrences?

Hors ligne

#19 Le 20/05/2006, à 18:42

marco29

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

et je n'irai pas creuser ta tombe pour avoir des lignes de code
quoique wink

Hors ligne

#20 Le 20/05/2006, à 18:42

shaddy

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

montre le xorg.conf que tu as maintenant.
Au fait quand tu dis la sortie TV ne marche pas, ça veut dire que ça marche pas du tout ou bien tu vois des trucs bizarres et pas beaux sur la TV. Parce que avec un xorg par défaut normallement ça devrait marcher un peu et tu pourrais avoir accès à une console.


www.villardnoir.eu/index.php

Hors ligne

#21 Le 20/05/2006, à 18:55

marco29

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

sur la TV j'ai un affichage "signal=0" sur fond blanc
c'est ce quelle affiche si il n'y a pas d'entrée antenne ou lecteur divers

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Wed Mar 29 14:43:26 PST 2006

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
    RgbPath         "/usr/X11R6/lib/X11/rgb"
	# Paths to defoma fonts
FontPath	"/usr/share/X11/fonts/75dpi"
FontPath	"/usr/share/X11/fonts/100dpi"
FontPath	"/usr/share/X11/fonts/misc"
FontPath	"/usr/share/X11/fonts/Type1"
FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath	"/usr/share/X11/fonts/75dpi/:unscaled"
FontPath	"/usr/share/X11/fonts/100dpi/:unscaled"
EndSection

Section "Module"
    Load           "dbe"
    Load           "extmod"
    Load           "type1"
    Load           "freetype"
    Load           "glx"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
    Load           "int10"
    Load           "vbe"
    Load           "record"
    Load           "xtrap"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "true"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
    Option	   "XkbRules" "xorg"
    Option	   "XkbModel" "pc105"
    Option	   "XkbLayout" "fr"
    Option	   "XkbVariant" "latin9"
EndSection

Section "Monitor"
    Identifier     "Monitor0" #CRT
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       30.0 - 110.0
    VertRefresh     50.0 - 150.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
        Option  "NoLogo"        "true"
        Option  "RenderAccel"   "true"
        BusID   "PCI:01:00:0"
Option "TwinView" "true"
Option "TwinViewOrientation" "Clone"
Option "TVOutFormat" "COMPOSITE"
Option "TVStandard" "PAL-N"
#Option "SecondMonitorHorizSync" "30-50"
#Option "SecondMonitorVertRefresh" "60"
Option "MetaModes" "1280x1024,1280x1024;1024x768,1024x768;800x600,800x600;640x480,640x480;512x384,512x384"
Option "ConnectedMonitor" "Television"
EndSection


Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
        Modes      "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "Monitor"
        Identifier "Television"
VendorName "unknown"
ModelName "unknown"
#Option "DPMS" "true"
HorizSync 30.0 - 82.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 70.0
#Resolutions ecrans TV standard ntsc
ModeLine "720x480" 26.7 720 736 808 896 480 481 484 497
ModeLine "720x576" 32.7 720 744 816 912 576 577 580 597
ModeLine "848x480" 31.5 848 864 952 1056 480 481 484 497
ModeLine "856x480" 31.7 856 872 960 1064 480 481 484 497
ModeLine "1024x512" 41.3 1024 1056 1160 1296 512 513 516 531
ModeLine "1280x768" 80.1 1280 1344 1480 1680 768 769 772 795
ModeLine "1440x1050" 126.2 1440 1536 1688 1936 1050 1051 1054 1087
#Resolutions ecrans TV standard Pal
Modeline "640x480x50" 20.20 640 656 800 800 480 482 483 505 # 20 MHz, 25.2 kHz, 50.0 Hz
Modeline "800x600x50" 33.1584 800 840 986 1056 600 601 605 628
Modeline "720x576x50" 27.15 720 736 880 896 576 578 579 606 # 27 MHz, 30.3 kHz, 50.0 Hz
Modeline "768x576x50" 29.09 768 792 936 960 576 578 579 606 # 29 MHz, 30.3 kHz, 50.0 Hz
Modeline "1024x768x50" 44.80 1024 1056 1200 1280 768 770 772 808 # 45 MHz, 35.0 kHz, 43.3 Hz
#Resolutions ecrans generique
Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 #60Hz
Modeline "800x600" 40.12 800 848 968 1056 600 601 605 628 #60Hz
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
Modeline "1024x768" 85 1024 1056 1152 1360 768 784 787 823
ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace
Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895
Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908
Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908
Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync
Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace
Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064
Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064
Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync
Endsection

Hors ligne

#22 Le 21/05/2006, à 00:31

shaddy

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

c koi ta télé ? coment kelle é branchait sur le bouzin ? c koua lé cabl ? les saurties et tout ? Et surtou, ne parl pâ en SMS ça menerve !
Oui c'est purement gratuit et non dirigé contre toi.


www.villardnoir.eu/index.php

Hors ligne

#23 Le 21/05/2006, à 11:16

marco29

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

je n'aprecie pas les sms non plus, j'ai cru que tu avais bu en commençant à lire ton message mais tu fais ce que tu veux
la TV        Thomson 29DX172
74 cm, Standard, Tube (CRT), Stereo
cable S-video branché en facade
OS: Linux ISA 2.6.12-10-686
cpu : pentium III  à 550
carte : GeForce2 MX 100 DDR/200 DDR
driver : NVIDIA-Linux-x86-1.0-8756-pkg1.run

nvtv dans les sources synaptic recherche nvidia (à la fin)

Hors ligne

#24 Le 21/05/2006, à 13:35

shaddy

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

lol non j'avais pas bu, mais je venais de me regarder la fin de the west wing et j'étais plus dans mon état normal.
Je demandais le branchement parce que normalement, même si le driver n'est pas installé, même s'il n'est pas configuré, la sortie TV marche un peu par défaut. Par exemple, chez moi, même avant d'activer le driver, je vois les logs de démarrage, grub et tout sur la TV, en Noir et blanc, pas beau mais ça marche. et puis un jour, un peu comme toi, plus rien, ça ne marche plus, plus une seule image. Et en fait c'était juste un problème de câble.
Donc :
- Vérifie tes branchements et tes câbles. Es-tu sûr que le branchement en façade est activé ?
- Et puis Linux ISA c'est quoi ? Tu n'est pas sous Ubuntu ?
- Essaye avec les drivers donnés dans les dépôts ubuntu.


www.villardnoir.eu/index.php

Hors ligne

#25 Le 23/05/2006, à 19:49

marco29

Re : ( abandonné ) nvidia tv out -warning dans Xorg.log

mes branchements et cables sont bons
ISA c'est le nom de ma bécane sous Ubuntu

nvtv tu connais?

çà me fait sad d'enlever le dernier driver NVidia

et j'ai perdu le montage automatique des lecteurs cd/dvd y a t il un lien?

Hors ligne