Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 16/05/2006, à 13:21

FCDI

soucis opengl

bonjour

j'ai un soucis avec cedega et opengl
je poste ici car c'est lié je pense a la carte graphique

j'ai deja xgl et ca marche mais j'ai un failed dans les tests cedega pour l'opengl

j'ai donc essayer de reinstaller mes pilotes suivants les tutos et j'ai ca

franck@FCDI:~$ sudo nvidia-glx-config enable

Error: your X configuration has been altered.
This script cannot proceed automatically. If you believe that this
not correct, you can update the md5sum entry executing the following
command:
md5sum /etc/X11/xorg.conf | sudo tee /var/lib/x11/xorg.conf.md5sum
otherwise edit manually /etc/X11/xorg.conf to change the Driver section
from nv to nvidia.
franck@FCDI:~$ sudo apt-get install nvidia-glx nvidia-settings
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances... Fait
nvidia-glx est déjà la plus récente version disponible.
Certains paquets ne peuvent être installés. Ceci peut signifier
que vous avez demandé l'impossible, ou bien, si vous utilisez
la distribution unstable, que certains paquets n'ont pas encore
été créés ou ne sont pas sortis d'Incoming.
L'information suivante devrait vous aider à résoudre la situation :

Les paquets suivants contiennent des dépendances non satisfaites :
  nvidia-glx: Est en conflit avec: nvidia-settings mais 1.0-3ubuntu7 devra être installé
E: Paquets défectueux

et voici mon xorg.conf

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Wed Mar 29 14:43:26 PST 2006

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen         "Default Screen" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "stylus" "SendCoreEvents"
    InputDevice    "cursor" "SendCoreEvents"
    InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

	# path to defoma fonts
    FontPath        "/usr/share/X11/fonts/misc"
    FontPath        "/usr/share/X11/fonts/cyrillic"
    FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/Type1"
    FontPath        "/usr/share/X11/fonts/100dpi"
    FontPath        "/usr/share/X11/fonts/75dpi"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
##    Load    	   "GLcore"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
## Load 	"dri"
    Load           "extmod"
    Load           "freetype"
    Load           "glx"
    Load           "int10"
    Load           "type1"
    Load           "vbe"

EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "fr"
    Option         "XkbVariant" "latin9"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ExplorerPS/2"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier     "Flatron795FT"
    Option         "DPMS"
    HorizSync      30-96
    VertRefresh    50-160
EndSection

Section "Device"
    Identifier     "NVIDIA Corporation NV43 [GeForce 6600/GeForce 6600 GT]"
    Driver         "nvidia"
##    Option         "UseEdidFreqs" "false"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "NVIDIA Corporation NV43 [GeForce 6600/GeForce 6600 GT]"
    Monitor        "Flatron795FT"
    DefaultDepth    24
    SubSection     "Display"
        Depth       1
        Modes      "1600x1200" "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x540" "720x400" "640x480"
    EndSubSection
EndSection

merci d'avance

Hors ligne

#2 Le 20/05/2006, à 20:22

Mentalbug

Re : soucis opengl

Tiens, même problème, avec une Dapper Beta 2 toute fraîchement installée (et je pense pas avoir fait quoi que ce soit qui modifie le xorg.conf).

(Google m'a amené ici tongue)

enfin, éditer le xorg.conf manuellement devrait pas être trop problématique j'imagine..

edit:Comme conseillé ici:
http://forum.ubuntu-fr.org/viewtopic.php?pid=250115#p250115
neutral wink

Dernière modification par Mentalbug (Le 20/05/2006, à 20:25)


"L'homme pressé est déjà mort" (proverbe arabe)

Petition for Microsoft to support OpenDocument

Hors ligne