Pages : 1
#1 Le 22/12/2009, à 17:23
- philippe.guilpain
Problème activation Wifi toshiba satellite pro l500
Je viens d'acquérir un satellite pro l500, j'ai installé un double boot windows xp et ubuntu 9.10. La carte wifi est une Realtek 8192Se . J'ai suivi ce post pour l'installée : http://forum.novatech.co.uk/showthread.php?p=197789. La carte parait bien installée :
$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=9.10
DISTRIB_CODENAME=karmic
DISTRIB_DESCRIPTION="Ubuntu 9.10"
lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 04f2:b128 Chicony Electronics Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 003: ID 0603:00f2 Novatek Microelectronics Corp.
Bus 006 Device 002: ID 046d:c03e Logitech, Inc. Premium Optical Wheel Mouse
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
0e:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
14:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10)
$ lspci -nn | grep -i net
0e:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
14:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. Device [10ec:8172] (rev 10)
$ sudo lshw -C network
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:0e:00.0
logical name: eth0
version: 02
serial: 00:26:22:eb:af:dd
size: 100MB/s
capacity: 100MB/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.0.12 latency=0 link=yes multicast=yes port=MII speed=100MB/s
resources: irq:29 ioport:3000(size=256) memory:f2010000-f2010fff(prefetchable) memory:f2000000-f200ffff(prefetchable) memory:f2020000-f203ffff(prefetchable)
*-network
description: Wireless interface
product: Realtek Semiconductor Co., Ltd.
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:14:00.0
logical name: wlan0
version: 10
serial: 70:1a:04:7e:4b:a1
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=rtl819xSE driverversion=V 1.1 firmware=49 latency=0 link=no multicast=yes wireless=802.11bgn
resources: irq:19 ioport:4000(size=256) memory:f2200000-f2203fff
*-network DISABLED
description: Ethernet interface
physical id: 2
logical name: vboxnet0
serial: 0a:00:27:00:00:00
capabilities: ethernet physical
configuration: broadcast=yes multicast=yes
$ lsmod
Module Size Used by
binfmt_misc 8356 1
ppdev 6688 0
vboxnetflt 84840 0
vboxnetadp 78344 0
vboxdrv 121160 1 vboxnetflt
joydev 10272 0
nls_utf8 1568 1
nls_cp850 4540 1
vfat 10716 1
fat 51452 1 vfat
snd_hda_codec_realtek 203328 1
snd_hda_intel 26920 2
snd_hda_codec 75708 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 7200 1 snd_hda_codec
snd_pcm_oss 37920 0
snd_mixer_oss 16028 1 snd_pcm_oss
snd_pcm 75296 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 2656 0
snd_seq_oss 28576 0
snd_seq_midi 6432 0
snd_rawmidi 22208 1 snd_seq_midi
iptable_filter 3100 0
ip_tables 11692 1 iptable_filter
x_tables 16544 1 ip_tables
snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi
snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
uvcvideo 59080 0
snd_timer 22276 2 snd_pcm,snd_seq
videodev 36736 1 uvcvideo
snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
v4l1_compat 14496 2 uvcvideo,videodev
r8192se_pci 417140 0
psmouse 56500 0
serio_raw 5280 0
snd 59204 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 7264 1 snd
snd_page_alloc 9156 2 snd_hda_intel,snd_pcm
lp 8964 0
parport 35340 2 ppdev,lp
dm_raid45 84228 0
xor 15620 1 dm_raid45
usbhid 38208 0
fbcon 36640 72
tileblit 2460 1 fbcon
font 8124 1 fbcon
bitblit 5372 1 fbcon
softcursor 1756 1 bitblit
r8169 32064 0
mii 5212 1 r8169
i915 221064 3
drm 159584 3 i915
i2c_algo_bit 5760 1 i915
video 19380 1 i915
output 2780 1 video
intel_agp 27484 2 i915
agpgart 34988 2 drm,intel_agp
$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 802.11bgn Nickname:"rtl8191SEVA2"
Mode:Managed Frequency=2.472 GHz Access Point: Not-Associated
Bit Rate:300 Mb/s
Retry:on RTS thr:off Fragment thr:off
Power Management:off
Link Quality=10/100 Signal level=0 dBm Noise level=-100 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
vboxnet0 no wireless extensions.
$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:26:22:eb:af:dd
inet adr:192.168.0.12 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: 2a01:e35:2438:6610:226:22ff:feeb:afdd/64 Scope:Global
adr inet6: fe80::226:22ff:feeb:afdd/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Packets reçus:1272 erreurs:0 :0 overruns:0 frame:0
TX packets:1325 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:772087 (772.0 KB) Octets transmis:163708 (163.7 KB)
Interruption:29 Adresse de base:0xc000
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
Packets reçus:4 erreurs:0 :0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
Octets reçus:240 (240.0 B) Octets transmis:240 (240.0 B)
wlan0 Link encap:Ethernet HWaddr 70:1a:04:7e:4b:a1
UP BROADCAST MULTICAST MTU:1500 Metric:1
Packets reçus:0 erreurs:0 :0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
Octets reçus:0 (0.0 B) Octets transmis:0 (0.0 B)
Interruption:19 Mémoire:f9328000-f9328100
$ sudo iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 No scan results
vboxnet0 Interface doesn't support scanning.
$ uname -r -m
2.6.31-16-generic i686
$ cat /etc/network/interfaces
auto lo
iface lo inet loopback
$ nm-tool
NetworkManager Tool
State: connected
- Device: eth0 [Auto eth0] ----------------------------------------------------
Type: Wired
Driver: r8169
State: connected
Default: yes
HW Address: 00:26:22:EB:AF:DD
Capabilities:
Carrier Detect: yes
Speed: 100 Mb/s
Wired Properties
Carrier: on
IPv4 Settings:
Address: 192.168.0.12
Prefix: 24 (255.255.255.0)
Gateway: 192.168.0.254
DNS: 212.27.40.240
DNS: 212.27.40.241
- Device: wlan0 ----------------------------------------------------------------
Type: 802.11 WiFi
Driver: rtl819xSE
State: disconnected
Default: no
HW Address: 70:1A:04:7E:4B:A1
Capabilities:
Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes
Wireless Access Points
Il me semble que le wifi n'est pas actif pourtant le led est allumé, il fonctionne sous windows ! Je ne sais plus quoi faire ?
NB : J'ai déjà poster cette question ce matin mais ce n'était pas très clair !
Merci
Hors ligne
#2 Le 22/12/2009, à 18:30
- dgédgé
Re : Problème activation Wifi toshiba satellite pro l500
Salut,
d'après la commande iwconfig, ta carte wlan0 n'est associée à aucun point d'accès.
est-ce que tu vois ton réseau dans l'applet network-manager ?
Hors ligne
#3 Le 22/12/2009, à 19:37
- philippe.guilpain
Re : Problème activation Wifi toshiba satellite pro l500
Oui le réseau filaire fonctionne mais aucun point d'accès Wifi ne sont vus alors qu'il en y a plusieurs dans les environs
Hors ligne
#4 Le 23/12/2009, à 08:16
- jj.fouillard
Re : Problème activation Wifi toshiba satellite pro l500
j'ai le meme probleme.
Tout à l'air de bien se passer quandje fait "make install", mais apres plus rien.
Retrouvez les tribulations de bilou et tuxy sur www.cyruscom.net/bilou-et-tuxy
Hors ligne
#5 Le 02/01/2010, à 18:47
- jj.fouillard
Re : Problème activation Wifi toshiba satellite pro l500
J'ai du mieux: en faisant dans un terminal :
sudo modprobe r8192se_pci
j'ai ce message :
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
puis il me met en route le wifi.
Le soucis qui reste, c'est qu'il faut que je fasse ça pour chaque démarrage...
Comment automatiser ça ?
Retrouvez les tribulations de bilou et tuxy sur www.cyruscom.net/bilou-et-tuxy
Hors ligne
#6 Le 03/01/2010, à 10:07
- jj.fouillard
Re : Problème activation Wifi toshiba satellite pro l500
... Probléme résolu, apparement, pour moi...
j'ai supprimé le fichier /etc/modprobe.d/ndiswrapper, et au redémarrage ma carte wifi était bien activée et fonctionnelle.
Retrouvez les tribulations de bilou et tuxy sur www.cyruscom.net/bilou-et-tuxy
Hors ligne
Pages : 1