Probleme premier lancement Toshiba Tecra S3 (Dapper Drake)

plicploc · Le 03/06/2006, à 12:13

Bonjour,

Après un premier essai concluant avec le LiveCD 6.06 (disque dur, carte graphique, wifi ... reconnus), j'ai installé Dapper Drake sur mon portable Toshiba Tecra S3.

Tout semblait s'être bien passé jusqu'à la fenêtre de login. La résolution est correcte, mais le curseur de la souris bouge très très lentement. De plus, le portable émet un son jamais entendu auparavant qui ressemble à une alarme. Après avoir inséré mon nom d'utilisateur et mot de passe, l'écran de login disparaît mais rien n'apparaît ensuite, l'écran reste brun-noir et le curseur souris est très lent, comme si la machine était surchargée. J'ai attendu quelques minutes sans voir apparaître quoique ce soit. Un top en mode console ne montre rien qui occupe le processeur.

Je ne sais pas du tout quoi faire. J'aurais voulu réinstaller au-moins une fois, mais désormais le LiveCD a le même problème (blocage, curseur souris lent, rien n'apparaît donc plus d'icône Install).

Mes questions:
- Avez-vous une idée de ce qui peut produire cela ? Où regarder ?
- Est-il possible d'installer emacs en mode console, parce que je ne m'en sors pas avec vi
- Sinon, comment pourrais-je réinstaller sachant que le LiveCD ne me donne pas la main en mode graphique ?

Quelques détails sur le portable:
- Toshiba Tecra S3 2GB Ram DDR2
- Disque dur SATA 100GB (n'était pas reconnu par Ubuntu 5.10)
Je l'ai partionné en / 5GB, /swap 4GB, /home 40GB
- Carte Graphique nVidia Geforce Go6600 128MB
http://be.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/selected_product_option.jsp?LNG=9&service=BE&PRODUCT_ID=113403&DISC_MODEL=0

Merci d'avance pour vos conseils.

plicploc · Le 03/06/2006, à 14:18

re,

quelques précisions: la souris est p-ê mal configurée, le touchpad fonctionne correctement sans lenteur. j'ai pu réinstaller (avec le LiveCD le problème ne semble pas se produire tout le temps), le problème est le même, son étrange et rien ne se passe après le login.

voici une copie de dmesg pour info:

[4294667.296000] Linux version 2.6.15-23-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[4294667.296000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
[4294667.296000] BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
[4294667.296000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000007ff70000 (usable)
[4294667.296000] BIOS-e820: 000000007ff70000 - 000000007ff80000 (ACPI data)
[4294667.296000] BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
[4294667.296000] BIOS-e820: 00000000f0000000 - 00000000f0006000 (reserved)
[4294667.296000] BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
[4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[4294667.296000] BIOS-e820: 00000000fed13000 - 00000000fed14000 (reserved)
[4294667.296000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[4294667.296000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[4294667.296000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[4294667.296000] BIOS-e820: 00000000ffe80000 - 0000000100000000 (reserved)
[4294667.296000] 1151MB HIGHMEM available.
[4294667.296000] 896MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 524144
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 225280 pages, LIFO batch:31
[4294667.296000] HighMem zone: 294768 pages, LIFO batch:31
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 TOSHIB ) @ 0x000f01e0
[4294667.296000] ACPI: RSDT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x7ff70000
[4294667.296000] ACPI: FADT (v002 TOSHIB 750 0x20030101 TASM 0x04010000) @ 0x7ff70068
[4294667.296000] ACPI: SSDT (v001 TOSHIB A0031 0x20040521 MSFT 0x0100000e) @ 0x7ff758b7
[4294667.296000] ACPI: BOOT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x7ff70040
[4294667.296000] ACPI: MADT (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x7ff77186
[4294667.296000] ACPI: MCFG (v001 TOSHIB 750 0x00970814 TASM 0x04010000) @ 0x7ff771e0
[4294667.296000] ACPI: SSDT (v001 TOSHIB A0031 0x20041018 MSFT 0x0100000e) @ 0x7ff767f6
[4294667.296000] ACPI: SSDT (v001 TOSHIB A0031 0x20041018 MSFT 0x0100000e) @ 0x7ff76fad
[4294667.296000] ACPI: DSDT (v001 TOSHIB A0031 0x20050705 MSFT 0x0100000e) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0xd808
[4294667.296000] ACPI: Local APIC address 0xfec80000
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 6:13 APIC version 20
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/sda3 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fec80000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 2261.587 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294667.705000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294667.706000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294667.778000] Memory: 2068020k/2096576k available (1976k kernel code, 27360k reserved, 606k data, 288k init, 1179072k highmem)
[4294667.778000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294667.838000] Calibrating delay using timer specific routine.. 4526.34 BogoMIPS (lpj=2263173)
[4294667.838000] Security Framework v1.0.0 initialized
[4294667.838000] SELinux: Disabled at boot.
[4294667.838000] Mount-cache hash table entries: 512
[4294667.838000] CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
[4294667.838000] CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000
[4294667.838000] CPU: L1 I cache: 32K, L1 D cache: 32K
[4294667.838000] CPU: L2 cache: 2048K
[4294667.838000] CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000180 00000000 00000000
[4294667.838000] mtrr: v2.0 (20020519)
[4294667.838000] CPU: Intel(R) Pentium(R) M processor 2.26GHz stepping 08
[4294667.838000] Enabling fast FPU save and restore... done.
[4294667.838000] Enabling unmasked SIMD FPU exception support... done.
[4294667.838000] Checking 'hlt' instruction... OK.
[4294667.842000] checking if image is initramfs... it is
[4294668.325000] Freeing initrd memory: 6836k freed
[4294668.331000] ACPI: Looking for DSDT ... not found!
[4294668.333000] ENABLING IO-APIC IRQs
[4294668.333000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294668.444000] NET: Registered protocol family 16
[4294668.444000] EISA bus registered
[4294668.444000] ACPI: bus type pci registered
[4294668.444000] PCI: PCI BIOS revision 2.10 entry at 0xfd96c, last bus=7
[4294668.444000] PCI: Using MMCONFIG
[4294668.444000] ACPI: Subsystem revision 20051216
[4294668.446000] ACPI: Interpreter enabled
[4294668.446000] ACPI: Using IOAPIC for interrupt routing
[4294668.447000] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
[4294668.447000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
[4294668.447000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
[4294668.447000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
[4294668.448000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
[4294668.448000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
[4294668.448000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11)
[4294668.448000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
[4294668.449000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294668.449000] PCI: Probing PCI hardware (bus 00)
[4294668.449000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294668.451000] PCI quirk: region d800-d87f claimed by ICH6 ACPI/GPIO/TCO
[4294668.451000] PCI quirk: region eec0-eeff claimed by ICH6 GPIO
[4294668.451000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[4294668.451000] Boot video device is 0000:01:00.0
[4294668.452000] PCI: Transparent bridge - 0000:00:1e.0
[4294668.452000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294668.454000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[4294668.457000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[4294668.457000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXCB._PRT]
[4294668.458000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[4294668.458000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294668.458000] pnp: PnP ACPI init
[4294668.465000] pnp: PnP ACPI: found 16 devices
[4294668.465000] PnPBIOS: Disabled by ACPI PNP
[4294668.465000] PCI: Using ACPI for IRQ routing
[4294668.465000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294668.479000] pnp: 00:08: ioport range 0x480-0x48f has been reserved
[4294668.479000] PCI: Failed to allocate mem resource #6:20000@c0000000 for 0000:01:00.0
[4294668.479000] PCI: Bridge: 0000:00:01.0
[4294668.479000] IO window: disabled.
[4294668.479000] MEM window: ce000000-cfffffff
[4294668.479000] PREFETCH window: b0000000-bfffffff
[4294668.479000] PCI: Bridge: 0000:00:1c.0
[4294668.479000] IO window: c000-cfff
[4294668.479000] MEM window: cdf00000-cdffffff
[4294668.479000] PREFETCH window: disabled.
[4294668.479000] PCI: Bridge: 0000:00:1c.1
[4294668.479000] IO window: b000-bfff
[4294668.479000] MEM window: cdd00000-cdefffff
[4294668.479000] PREFETCH window: afe00000-afffffff
[4294668.479000] PCI: Bus 6, cardbus bridge: 0000:05:0b.0
[4294668.479000] IO window: 00001000-000010ff
[4294668.479000] IO window: 00001400-000014ff
[4294668.479000] PREFETCH window: 88000000-89ffffff
[4294668.479000] MEM window: 8c000000-8dffffff
[4294668.479000] PCI: Bridge: 0000:00:1e.0
[4294668.479000] IO window: 1000-1fff
[4294668.479000] MEM window: cdc00000-cdcfffff
[4294668.479000] PREFETCH window: 88000000-89ffffff
[4294668.479000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294668.479000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294668.479000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
[4294668.479000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4294668.480000] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 16 (level, low) -> IRQ 169
[4294668.480000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[4294668.480000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294668.480000] PCI: Enabling device 0000:05:0b.0 (0000 -> 0003)
[4294668.480000] ACPI: PCI Interrupt 0000:05:0b.0[A] -> GSI 21 (level, low) -> IRQ 185
[4294668.480000] Simple Boot Flag at 0x7c set to 0x1
[4294668.480000] audit: initializing netlink socket (disabled)
[4294668.480000] audit(1149340015.479:1): initialized
[4294668.480000] highmem bounce pool size: 64 pages
[4294668.480000] VFS: Disk quotas dquot_6.5.1
[4294668.480000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294668.480000] Initializing Cryptographic API
[4294668.480000] io scheduler noop registered
[4294668.480000] io scheduler anticipatory registered
[4294668.480000] io scheduler deadline registered
[4294668.480000] io scheduler cfq registered
[4294668.480000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294668.480000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294668.480000] assign_interrupt_mode Found MSI capability
[4294668.480000] Allocate Port Service[pcie00]
[4294668.480000] Allocate Port Service[pcie03]
[4294668.480000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
[4294668.480000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4294668.480000] assign_interrupt_mode Found MSI capability
[4294668.480000] Allocate Port Service[pcie00]
[4294668.480000] Allocate Port Service[pcie03]
[4294668.480000] ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 16 (level, low) -> IRQ 169
[4294668.480000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[4294668.480000] assign_interrupt_mode Found MSI capability
[4294668.480000] Allocate Port Service[pcie00]
[4294668.480000] Allocate Port Service[pcie02]
[4294668.480000] Allocate Port Service[pcie03]
[4294668.480000] isapnp: Scanning for PnP cards...
[4294668.839000] isapnp: No Plug & Play device found
[4294668.849000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294668.853000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294668.854000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294668.854000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294668.854000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294668.855000] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294668.856000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294668.856000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294668.856000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294668.856000] mice: PS/2 mouse device common for all mice
[4294668.856000] EISA: Probing bus 0 at eisa.0
[4294668.856000] Cannot allocate resource for EISA slot 1
[4294668.856000] EISA: Detected 0 cards.
[4294668.856000] NET: Registered protocol family 2
[4294668.865000] IP route cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294668.865000] TCP established hash table entries: 524288 (order: 9, 2097152 bytes)
[4294668.867000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294668.868000] TCP: Hash tables configured (established 524288 bind 65536)
[4294668.868000] TCP reno registered
[4294668.868000] TCP bic registered
[4294668.868000] NET: Registered protocol family 1
[4294668.868000] NET: Registered protocol family 8
[4294668.868000] NET: Registered protocol family 20
[4294668.868000] Using IPI Shortcut mode
[4294668.868000] ACPI wakeup devices:
[4294668.868000] USB2 USB3 USB4 EHCI AZAL GLAN EXCB LID PWRB
[4294668.868000] ACPI: (supports S0 S3 S4 S5)
[4294668.868000] Freeing unused kernel memory: 288k freed
[4294668.882000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294668.901000] vga16fb: initializing
[4294668.901000] vga16fb: mapped to 0xc00a0000
[4294669.220000] Console: switching to colour frame buffer device 80x25
[4294669.220000] fb0: VGA16 VGA frame buffer device
[4294670.453000] Capability LSM initialized
[4294670.474000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[4294670.475000] ACPI: Thermal Zone [THRM] (63 C)
[4294670.917000] ICH6: IDE controller at PCI slot 0000:00:1f.1
[4294670.917000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 201
[4294670.917000] ICH6: chipset revision 3
[4294670.917000] ICH6: not 100% native mode: will probe irqs later
[4294670.917000] ide0: BM-DMA at 0xaf10-0xaf17, BIOS settings: hda:DMA, hdb:pio
[4294670.917000] Probing IDE interface ide0...
[4294671.589000] hda: MATSHITADVD-RAM UJ-832S, ATAPI CD/DVD-ROM drive
[4294671.895000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294671.902000] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294671.902000] Uniform CD-ROM driver Revision: 3.20
[4294671.930000] SCSI subsystem initialized
[4294671.931000] ACPI: bus type scsi registered
[4294671.931000] libata version 1.20 loaded.
[4294671.932000] ahci 0000:00:1f.2: version 1.2
[4294671.932000] ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 209
[4294676.244000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294676.244000] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[4294676.244000] ahci 0000:00:1f.2: flags: 64bit ncq ilck pm led slum part
[4294676.244000] ata1: SATA max UDMA/133 cmd 0xF8880D00 ctl 0x0 bmdma 0x0 irq 209
[4294676.244000] ata2: SATA max UDMA/133 cmd 0xF8880D80 ctl 0x0 bmdma 0x0 irq 209
[4294676.244000] ata3: SATA max UDMA/133 cmd 0xF8880E00 ctl 0x0 bmdma 0x0 irq 209
[4294676.244000] ata4: SATA max UDMA/133 cmd 0xF8880E80 ctl 0x0 bmdma 0x0 irq 209
[4294676.446000] ata1: dev 0 cfg 00:0040 49:2f00 82:746b 83:7d09 84:6023 85:7469 86:3c09 87:6023 88:203f 93:0000
[4294676.446000] ata1: dev 0 ATA-6, max UDMA/100, 195371568 sectors: LBA48
[4294676.446000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe48c0
[4294676.450000] ata1: dev 0 configured for UDMA/100
[4294676.450000] sata_get_dev_handle: SATA dev addr=0x1f0002, handle=0xdffe48c0
[4294676.450000] scsi0 : ahci
[4294676.652000] ata2: no device found (phy stat 00000000)
[4294676.652000] scsi1 : ahci
[4294676.854000] ata3: no device found (phy stat 00000000)
[4294676.854000] scsi2 : ahci
[4294677.056000] ata4: no device found (phy stat 00000000)
[4294677.056000] scsi3 : ahci
[4294677.056000] Vendor: ATA Model: TOSHIBA MK1032GS Rev: AS02
[4294677.056000] Type: Direct-Access ANSI SCSI revision: 05
[4294677.062000] Driver 'sd' needs updating - please use bus_type methods
[4294677.062000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[4294677.062000] SCSI device sda: drive cache: write back
[4294677.064000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[4294677.064000] SCSI device sda: drive cache: write back
[4294677.064000] sda: sda1 sda2 sda3 sda4
[4294677.479000] sd 0:0:0:0: Attached scsi disk sda
[4294677.769000] usbcore: registered new driver usbfs
[4294677.769000] usbcore: registered new driver hub
[4294677.770000] USB Universal Host Controller Interface driver v2.3
[4294677.770000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 217
[4294677.770000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294677.770000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294677.770000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294677.770000] uhci_hcd 0000:00:1d.0: irq 217, io base 0x0000afe0
[4294677.770000] hub 1-0:1.0: USB hub found
[4294677.770000] hub 1-0:1.0: 2 ports detected
[4294677.814000] ieee1394: Initialized config rom entry `ip1394'
[4294677.871000] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 209
[4294677.871000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294677.871000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294677.871000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294677.871000] uhci_hcd 0000:00:1d.1: irq 209, io base 0x0000af80
[4294677.871000] hub 2-0:1.0: USB hub found
[4294677.871000] hub 2-0:1.0: 2 ports detected
[4294677.972000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 201
[4294677.972000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294677.972000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294677.972000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294677.972000] uhci_hcd 0000:00:1d.2: irq 201, io base 0x0000af60
[4294677.972000] hub 3-0:1.0: USB hub found
[4294677.972000] hub 3-0:1.0: 2 ports detected
[4294678.073000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
[4294678.073000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294678.073000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[4294678.073000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[4294678.073000] uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000af40
[4294678.073000] hub 4-0:1.0: USB hub found
[4294678.073000] hub 4-0:1.0: 2 ports detected
[4294678.077000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[4294678.176000] PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
[4294678.176000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 217
[4294678.176000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294678.176000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294678.176000] ehci_hcd 0000:00:1d.7: debug port 1
[4294678.176000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[4294678.176000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[4294678.176000] ehci_hcd 0000:00:1d.7: irq 217, io mem 0x8a004000
[4294678.180000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294678.180000] hub 5-0:1.0: USB hub found
[4294678.180000] hub 5-0:1.0: 8 ports detected
[4294678.281000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins@debian.org>
[4294678.281000] PCI: Enabling device 0000:05:0b.2 (0000 -> 0002)
[4294678.281000] ACPI: PCI Interrupt 0000:05:0b.2[C] -> GSI 20 (level, low) -> IRQ 225
[4294678.332000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[225] MMIO=[cdc05000-cdc057ff] Max Packet=[2048]
[4294678.366000] Probing IDE interface ide1...
[4294678.591000] usb 1-1: device not accepting address 2, error -71
[4294678.912000] Attempting manual resume
[4294678.939000] EXT3-fs: mounted filesystem with ordered data mode.
[4294678.955000] kjournald starting. Commit interval 5 seconds
[4294679.141000] irq 169: nobody cared (try booting with the "irqpoll" option)
[4294679.141000] [<c013ee42>] __report_bad_irq+0x22/0x80
[4294679.141000] [<c013ef38>] note_interrupt+0x68/0xc0
[4294679.141000] [<c013e7fc>] __do_IRQ+0xbc/0xe0
[4294679.141000] [<c010597a>] do_IRQ+0x1a/0x30
[4294679.141000] [<c01040ea>] common_interrupt+0x1a/0x20
[4294679.141000] [<f8874bfa>] acpi_processor_idle+0x1dd/0x2bc [processor]
[4294679.141000] [<c01010dc>] cpu_idle+0x1c/0x60
[4294679.141000] [<c03887c6>] start_kernel+0x176/0x1d0
[4294679.141000] handlers:
[4294679.141000] [<f8934330>] (usb_hcd_irq+0x0/0x60 [usbcore])
[4294679.141000] Disabling IRQ #169
[4294679.327000] usb 1-1: new full speed USB device using uhci_hcd and address 4
[4294679.588000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00003900009d7202]
[4294679.660000] usb 4-1: new low speed USB device using uhci_hcd and address 2
[4294687.229000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4294687.321000] Linux agpgart interface v0.101 (c) Dave Jones
[4294687.328000] agpgart: Detected an Intel 915GM Chipset.
[4294687.345000] agpgart: AGP aperture is 256M @ 0x0
[4294687.577000] hw_random hardware driver 1.0.0 loaded
[4294687.587000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294687.592000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294687.843000] input: PC Speaker as /class/input/input1
[4294687.859000] Real Time Clock Driver v1.12
[4294687.939000] PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
[4294687.939000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294687.939000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[4294688.045000] hda_intel: azx_get_response timeout, switching to single_cmd mode...
[4294688.077000] nvidia: module license 'NVIDIA' taints kernel.
[4294688.081000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294688.081000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[4294688.081000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8762 Mon May 15 13:06:38 PDT 2006
[4294688.162000] ieee80211_crypt: registered algorithm 'NULL'
[4294688.163000] ieee80211: 802.11 data/management/control stack, git-1.1.7
[4294688.163000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[4294688.191000] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.1.1
[4294688.191000] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[4294688.191000] Warning: PCI driver ipw2200 has a struct device_driver shutdown method, please update!
[4294688.191000] ACPI: PCI Interrupt 0000:05:05.0[A] -> GSI 22 (level, low) -> IRQ 233
[4294688.191000] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[4294688.574000] input: DualPoint Stick as /class/input/input2
[4294688.575000] NVRM: PAT index 1 already configured for Write-Combining!
[4294688.575000] NVRM: Aborting, due to PAT already being configured
[4294688.597000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294688.597000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[4294688.597000] sky2 v0.15 addr 0xcdffc000 irq 169 Yukon-EC (0xb6) rev 1
[4294688.608000] input: AlpsPS/2 ALPS DualPoint TouchPad as /class/input/input3
[4294688.623000] tpm_inf_pnp 00:09: Found TPM with ID IFX0101
[4294688.623000] tpm_inf_pnp 00:09: TPM found: config base 0x4e, io base 0x680, chip version 0006, vendor id 15d1 (Infineon), product id 0006 (SLD 9630 TT 1.1)
[4294688.632000] usbcore: registered new driver hiddev
[4294688.812000] **** SET: Misaligned resource pointer: f7d91c42 Type 04 Len 42
[4294688.812000] **** SET: Misaligned resource pointer: f7d91cc6 Type 01 Len 42
[4294688.813000] pnp: Device 00:0c activated.
[4294688.813000] parport: PnPBIOS parport detected.
[4294688.813000] pnp: Device 00:0c disabled.
[4294688.986000] ts: Compaq touchscreen protocol output
[4294689.240000] sdhci: Secure Digital Host Controller Interface driver, 0.10
[4294689.240000] sdhci: Copyright(c) Pierre Ossman
[4294689.282000] ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a channels)
[4294689.292000] sky2 eth1: addr 00:0e:7b:b0:1c:a1
[4294689.293000] ACPI: PCI Interrupt 0000:05:0b.0[A] -> GSI 21 (level, low) -> IRQ 185
[4294689.293000] Yenta: CardBus bridge found at 0000:05:0b.0 [1179:0001]
[4294689.293000] Yenta: Using CSCINT to route CSC interrupts to PCI
[4294689.293000] Yenta: Routing CardBus interrupts to PCI
[4294689.293000] Yenta TI: socket 0000:05:0b.0, mfunc 0x01aa1b02, devctl 0x64
[4294689.480000] sky2 eth1: enabling interface
[4294689.516000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 185
[4294689.516000] Socket status: 30000086
[4294689.516000] Yenta: Raising subordinate bus# of parent bus (#05) from #07 to #09
[4294689.516000] pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff
[4294689.516000] cs: IO port probe 0x1000-0x1fff: clean.
[4294689.516000] pcmcia: parent PCI bridge Memory window: 0xcdc00000 - 0xcdcfffff
[4294689.516000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x89ffffff
[4294689.521000] PCI: Enabling device 0000:05:0b.4 (0000 -> 0002)
[4294689.521000] ACPI: PCI Interrupt 0000:05:0b.4[D] -> GSI 23 (level, low) -> IRQ 217
[4294689.571000] sdhci: ============== REGISTER DUMP ==============
[4294689.571000] sdhci: Sys addr: 0x00000000 | Version: 0x00008400
[4294689.571000] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
[4294689.571000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[4294689.571000] sdhci: Present: 0x00020000 | Host ctl: 0x00000000
[4294689.571000] sdhci: Power: 0x00000000 | Blk gap: 0x00000000
[4294689.571000] sdhci: Walk up: 0x00000000 | Clock: 0x00000002
[4294689.571000] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000
[4294689.571000] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf
[4294689.571000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[4294689.571000] sdhci: Caps: 0x01c21090 | Max curr: 0x00000000
[4294689.571000] sdhci: ===========================================
[4294689.622000] mmc0: SDHCI at 0xcdc05800 irq 217 DMA
[4294689.722000] sdhci: ============== REGISTER DUMP ==============
[4294689.722000] sdhci: Sys addr: 0x00000000 | Version: 0x00008400
[4294689.722000] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
[4294689.722000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[4294689.722000] sdhci: Present: 0x00020000 | Host ctl: 0x00000000
[4294689.722000] sdhci: Power: 0x00000000 | Blk gap: 0x00000000
[4294689.722000] sdhci: Walk up: 0x00000000 | Clock: 0x00000002
[4294689.722000] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000
[4294689.722000] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf
[4294689.722000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[4294689.722000] sdhci: Caps: 0x01c21090 | Max curr: 0x00000000
[4294689.722000] sdhci: ===========================================
[4294689.772000] mmc1: SDHCI at 0xcdc05900 irq 217 DMA
[4294689.871000] sdhci: ============== REGISTER DUMP ==============
[4294689.871000] sdhci: Sys addr: 0x00000000 | Version: 0x00008400
[4294689.871000] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
[4294689.871000] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[4294689.871000] sdhci: Present: 0x000a0000 | Host ctl: 0x00000000
[4294689.871000] sdhci: Power: 0x00000000 | Blk gap: 0x00000000
[4294689.871000] sdhci: Walk up: 0x00000000 | Clock: 0x00000002
[4294689.871000] sdhci: Timeout: 0x0000000e | Int stat: 0x00000000
[4294689.871000] sdhci: Int enab: 0x11ff00cf | Sig enab: 0x11ff00cf
[4294689.871000] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[4294689.871000] sdhci: Caps: 0x01c21898 | Max curr: 0x00000000
[4294689.871000] sdhci: ===========================================
[4294689.922000] mmc2: SDHCI at 0xcdc05a00 irq 217 DMA
[4294690.233000] input: Logitech USB Receiver as /class/input/input4
[4294690.233000] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.3-1
[4294690.233000] usbcore: registered new driver usbhid
[4294690.233000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[4294690.303000] cs: IO port probe 0x100-0x3af: clean.
[4294690.305000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[4294690.305000] cs: IO port probe 0x820-0x8ff: clean.
[4294690.306000] cs: IO port probe 0xc00-0xcf7: clean.
[4294690.306000] cs: IO port probe 0xa00-0xaff: clean.
[4294690.868000] lp: driver loaded but no devices found
[4294690.897000] NET: Registered protocol family 17
[4294690.907000] sbp2: $Rev: 1306 $ Ben Collins <bcollins@debian.org>
[4294690.907000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[4294690.907000] ieee1394: sbp2: Try serialize_io=0 for better performance
[4294691.007000] Adding 4192956k swap on /dev/sda2. Priority:-1 extents:1 across:4192956k
[4294691.613000] EXT3 FS on sda3, internal journal
[4294691.821000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294691.821000] md: bitmap version 4.39
[4294692.305000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
[4294693.097000] hda: packet command error: status=0x51 { DriveReady SeekComplete Error }
[4294693.097000] hda: packet command error: error=0x50 { LastFailedSense=0x05 }
[4294693.097000] ide: failed opcode was: unknown
[4294693.098000] cdrom: open failed.
[4294693.544000] kjournald starting. Commit interval 5 seconds
[4294693.544000] EXT3 FS on sda4, internal journal
[4294693.544000] EXT3-fs: mounted filesystem with ordered data mode.
[4294697.667000] NET: Registered protocol family 10
[4294697.667000] lo: Disabled Privacy Extensions
[4294697.667000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[4294697.667000] IPv6 over IPv4 tunneling driver
[4294698.329000] ACPI: AC Adapter [ADP1] (on-line)
[4294698.350000] ACPI: Battery Slot [BAT1] (battery present)
[4294698.390000] ACPI: Power Button (FF) [PWRF]
[4294698.390000] ACPI: Lid Switch [LID]
[4294698.390000] ACPI: Power Button (CM) [PWRB]
[4294698.452000] ibm_acpi: ec object not found
[4294698.468000] pcc_acpi: loading...
[4294698.507000] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19a-dev
[4294698.507000] toshiba_acpi: HCI method: \_SB_.VALZ.GHCI
[4294698.508000] toshiba_acpi: Toshiba hotkeys are sent as ACPI events
[4294698.508000] toshiba_acpi: ktoshkeyd will check 2 times per second
[4294698.508000] toshiba_acpi: Dropped 0 keys from the queue on startup
[4294698.520000] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
[4294701.793000] uhci_hcd 0000:00:1d.3: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
[4294702.784000] ppdev: user-space parallel port driver
[4294702.984000] apm: BIOS not found.
[4294705.272000] Bluetooth: Core ver 2.8
[4294705.272000] NET: Registered protocol family 31
[4294705.272000] Bluetooth: HCI device and connection manager initialized
[4294705.272000] Bluetooth: HCI socket layer initialized
[4294705.292000] Bluetooth: L2CAP ver 2.8
[4294705.292000] Bluetooth: L2CAP socket layer initialized
[4294705.305000] Bluetooth: RFCOMM socket layer initialized
[4294705.305000] Bluetooth: RFCOMM TTY layer initialized
[4294705.305000] Bluetooth: RFCOMM ver 1.7
[4294708.615000] eth0: no IPv6 routers present
[4294755.733000] usb 4-1: USB disconnect, address 2

Ubuntu-fr

Navigation

Liens de recherche

Annonce

#1 Le 03/06/2006, à 12:13

Probleme premier lancement Toshiba Tecra S3 (Dapper Drake)

#2 Le 03/06/2006, à 14:18

Re : Probleme premier lancement Toshiba Tecra S3 (Dapper Drake)

Pied de page des forums