Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 21/01/2010, à 13:00

malbo

[HOW TO] bootinfoscript

Bootinfoscript permet d'obtenir une aide plus rapide. Il est nécessaire de lancer ce script depuis une session live de Ubuntu (PC démarré sur le liveCD ou sur une clé liveUSB "non-persistant")

1) télécharger le script là (il faut enregistrer le fichier proposé) :
http://sourceforge.net/projects/bootinfoscript/

2) Partir à la recherche de ce fichier enregistré (il se nomme "bootinfoscript-061.tar.gz") avec le gestionnaire de fichier : il est dans le chemin suivant : /home/ubuntu/Téléchargements
ou dans ce chemin si le support live utilisé est en version anglaise : /home/ubuntu/Downloads
Clic droit sur l’icône du fichier bootinfoscript-061.tar.gz > "Extraire ici" (Extract here) ==> après cela, il y a création d'un dossier bootinfoscript-061 qui contient le fichier bootinfoscript

3) Ouvrez un terminal (Applications > Accessoires > Terminal) et coller la ligne qui suit :

sudo bash $HOME/Téléchargements/bootinfoscript-061/bootinfoscript

Puis valider par la touche Entrée

ou bien si le support live est en version anglaise, c'est cette ligne :

sudo bash $HOME/Downloads/bootinfoscript-061/bootinfoscript

Puis valider par la touche Entrée


A partir de là, ça mouline et quelques lignes apparaissent pour indiquer où se trouve le fichier résultat créé (il se nomme RESULTS.txt et se trouve normalement dans le même chemin que bootinfoscript) .

4) Reste à ouvrir ce fichier résultat avec l'éditeur de texte gedit (par un double-clic sur l'icône du fichier résultat. S'il apparaît le message "impossible d'ouvrir le fichier...", sélectionner "Occidental (ISO-8859-15)" au lieu de "Détecter automatiquement" et clic sur le bouton "Réessayer". Cela doit ouvrir le fichier), à copier tout son contenu et à coller le tout dans le post de réponse (pas ici mais dans la discussion en cours) en utilisant les balises code comme expliqué là :
http://doc.ubuntu-fr.org/tutoriel/howto … ne_reponse
Mais oui, cherchez un peu, c'est dans cette partie du lien et le type de balise à utiliser au début et à la fin est clairement précisé :

Le texte inséré entre les balises code sera affiché avec une police type "console". De plus, si la longueur du texte dépasse un certain nombre de lignes, il sera mis dans un cadre avec une barre de défilement sur le côté.

C'est la balise à utiliser pour donner de longs messages d'erreurs, des contenus de fichiers de configuration, des commandes à taper, etc … Elle permet des messages plus "compacts", et est moins ambigüe que d'autres polices sur certains caractères.

L'utilisation des balises code permet une lecture plus facile de la discussion. L'aspect est celui de mon résultat ci-dessous.

Voici le résultat que j'ai obtenu sur mon PC Medion depuis une session live CD Ubuntu 9.10 :

============================= Boot Info Summary: ==============================

 => Grub 1.97 is installed in the MBR of /dev/sda and looks on the same drive 
    in partition #9 for /boot/grub.
 => Grub 0.97 is installed in the MBR of /dev/sdb and looks on the same drive 
    in partition #7 for /boot/grub/stage2 and /boot/grub/menu.lst.
sda1: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows XP
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows XP
    Boot files/dirs:   /boot.ini /ntldr /NTDETECT.COM /wubildr.mbr

sda2: _________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info:  

sda5: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows XP
    Boot sector info:  According to the info in the boot sector, sda5 starts 
                       at sector 63.
    Operating System:  
    Boot files/dirs:   

sda6: _________________________________________________________________________

    File system:       vfat
    Boot sector type:  -
    Boot sector info:  According to the info in the boot sector, sda6 starts 
                       at sector 63.
    Operating System:  
    Boot files/dirs:   

sda7: _________________________________________________________________________

    File system:       ext3
    Boot sector type:  -
    Boot sector info:  
    Operating System:  
    Boot files/dirs:   

sda8: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows XP
    Boot sector info:  According to the info in the boot sector, sda8 starts 
                       at sector 63.
    Operating System:  
    Boot files/dirs:   /ubuntu/winboot/wubildr.mbr /ubuntu/disks/root.disk 
                       /ubuntu/disks/swap.disk

sda8/Wubi: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:  
    Operating System:  Ubuntu 9.10
    Boot files/dirs:   /boot/grub/grub.cfg /etc/fstab

sda9: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:  
    Operating System:  Ubuntu 9.10
    Boot files/dirs:   /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sda10: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info:  

sda11: _________________________________________________________________________

    File system:       ext3
    Boot sector type:  -
    Boot sector info:  
    Operating System:  
    Boot files/dirs:   

sda12: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows XP
    Boot sector info:  According to the info in the boot sector, sda12 starts 
                       at sector 63.
    Operating System:  Windows XP
    Boot files/dirs:   

sdb1: _________________________________________________________________________

    File system:       ext3
    Boot sector type:  -
    Boot sector info:  
    Operating System:  
    Boot files/dirs:   

sdb2: _________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info:  

sdb5: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows XP
    Boot sector info:  According to the info in the boot sector, sdb5 starts 
                       at sector 63.
    Operating System:  
    Boot files/dirs:   

sdb6: _________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows XP: Fat32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files/dirs:   

sdb7: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:  
    Operating System:  Ubuntu 9.04
    Boot files/dirs:   /boot/grub/menu.lst /boot/grub/grub.conf /etc/fstab

=========================== Drive/Partition Info: =============================

Drive: sda ___________________ _____________________________________________________

Disque /dev/sda: 300.1 Go, 300090728448 octets
255 têtes, 63 secteurs/piste, 36483 cylindres, total 586114704 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Identifiant de disque : 0x4bf64bf5

Partition  Boot         Start           End          Size  Id System

/dev/sda1    *             63    48,114,674    48,114,612   7 HPFS/NTFS
/dev/sda2          48,114,675   586,083,329   537,968,655   f W95 Ext d (LBA)
/dev/sda5          48,114,738   247,690,169   199,575,432   7 HPFS/NTFS
/dev/sda6         247,690,233   258,180,614    10,490,382   c W95 FAT32 (LBA)
/dev/sda7         258,180,678   268,430,084    10,249,407  83 Linux
/dev/sda8         268,430,148   483,701,084   215,270,937   7 HPFS/NTFS
/dev/sda9         483,701,148   504,183,959    20,482,812  83 Linux
/dev/sda10        504,184,023   516,473,684    12,289,662  82 Linux swap / Solaris
/dev/sda11        516,473,748   538,996,814    22,523,067  83 Linux
/dev/sda12        538,996,878   586,083,329    47,086,452   7 HPFS/NTFS


Drive: sdb ___________________ _____________________________________________________

Disque /dev/sdb: 163.9 Go, 163928604672 octets
255 têtes, 63 secteurs/piste, 19929 cylindres, total 320173056 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Identifiant de disque : 0xe09fe09f

Partition  Boot         Start           End          Size  Id System

/dev/sdb1    *             63    57,753,674    57,753,612  83 Linux
/dev/sdb2          57,753,675   320,159,384   262,405,710   f W95 Ext d (LBA)
/dev/sdb5          57,753,738   297,314,954   239,561,217   7 HPFS/NTFS
/dev/sdb6         297,315,018   309,909,914    12,594,897   b W95 FAT32
/dev/sdb7         309,909,978   320,159,384    10,249,407  83 Linux


blkid -c /dev/null: ____________________________________________________________

/dev/loop0: TYPE="squashfs" 
/dev/loop1: UUID="5a02f28a-bdb0-4da5-8e7d-727331638b5e" TYPE="ext4" 
/dev/sda10: UUID="35aa088f-d6a2-4ddf-b45c-b1e6bb0b72f4" TYPE="swap" 
/dev/sda11: UUID="6170c787-791e-4b12-952e-7c9b98ceda38" SEC_TYPE="ext2" TYPE="ext3" 
/dev/sda12: UUID="0620A81E20A816A9" TYPE="ntfs" 
/dev/sda1: UUID="01C67BDEBADC6540" LABEL="MAX300_VOL1" TYPE="ntfs" 
/dev/sda5: UUID="98ECE41BECE3F204" LABEL="MAX300_VOL2" TYPE="ntfs" 
/dev/sda6: LABEL="MAX300_VOL3" UUID="0000-0DFB" TYPE="vfat" 
/dev/sda7: UUID="e25f8c9f-09c9-43e7-8632-c0ed53cf1b13" SEC_TYPE="ext2" TYPE="ext3" 
/dev/sda8: UUID="5AC89690C8966A51" LABEL="MAX300_VOL5" TYPE="ntfs" 
/dev/sda9: UUID="ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1" TYPE="ext4" 
/dev/sdb1: UUID="b431fcbc-3801-49a5-b02f-84a5409f293a" SEC_TYPE="ext2" TYPE="ext3" 
/dev/sdb5: UUID="1460E4C060E4A9A6" LABEL="MAX160_VOL2" TYPE="ntfs" 
/dev/sdb6: LABEL="MAX160_VOL3" UUID="24E4-D494" TYPE="vfat" 
/dev/sdb7: UUID="1c721c8c-28df-47f8-b007-0605f08acf34" TYPE="ext4" 

=============================== "mount" output: ===============================

aufs on / type aufs (rw)
none on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
/dev/sr0 on /cdrom type iso9660 (rw)
/dev/loop0 on /rofs type squashfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)


================================ sda1/boot.ini: ================================

[boot loader]

timeout=5

default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS

[operating systems]

multi(0)disk(0)rdisk(0)partition(9)\WINDOWS="Montage video avec XP" /noexecute=optin /fastdetect

multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP dition familiale" /fastdetect /NoExecute=OptIn

C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons

C:\wubildr.mbr = "Ubuntu"








======================== sda8/Wubi/boot/grub/grub.cfg: ========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
  have_grubenv=true
  load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
  saved_entry=${prev_saved_entry}
  save_env saved_entry
  prev_saved_entry=
  save_env prev_saved_entry
fi
if [ ${recordfail} = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
menuentry "Ubuntu, Linux 2.6.31-17-generic" {
    insmod ntfs
    set root=(hd0,8)
    search --no-floppy --fs-uuid --set 5ac89690c8966a51
    loopback loop0 /ubuntu/disks/root.disk
    set root=(loop0)
    linux /boot/vmlinuz-2.6.31-17-generic root=/dev/sda8 loop=/ubuntu/disks/root.disk ro   quiet splash
    initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode)" {
    insmod ntfs
    set root=(hd0,8)
    search --no-floppy --fs-uuid --set 5ac89690c8966a51
    loopback loop0 /ubuntu/disks/root.disk
    set root=(loop0)
    linux /boot/vmlinuz-2.6.31-17-generic root=/dev/sda8 loop=/ubuntu/disks/root.disk ro single 
    initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic" {
    insmod ntfs
    set root=(hd0,8)
    search --no-floppy --fs-uuid --set 5ac89690c8966a51
    loopback loop0 /ubuntu/disks/root.disk
    set root=(loop0)
    linux /boot/vmlinuz-2.6.31-16-generic root=/dev/sda8 loop=/ubuntu/disks/root.disk ro   quiet splash
    initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode)" {
    insmod ntfs
    set root=(hd0,8)
    search --no-floppy --fs-uuid --set 5ac89690c8966a51
    loopback loop0 /ubuntu/disks/root.disk
    set root=(loop0)
    linux /boot/vmlinuz-2.6.31-16-generic root=/dev/sda8 loop=/ubuntu/disks/root.disk ro single 
    initrd /boot/initrd.img-2.6.31-16-generic
}
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows NT/2000/XP (loader) (on /dev/sda1)" {
    insmod ntfs
    set root=(hd0,1)
    search --no-floppy --fs-uuid --set 01c67bdebadc6540
    drivemap -s (hd0) ${root}
    chainloader +1
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (on /dev/sda9)" {
    insmod ext2
    set root=(hd0,9)
    search --no-floppy --fs-uuid --set ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1
    linux /boot/vmlinuz-2.6.31-17-generic root=UUID=ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1 ro quiet splash
    initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode) (on /dev/sda9)" {
    insmod ext2
    set root=(hd0,9)
    search --no-floppy --fs-uuid --set ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1
    linux /boot/vmlinuz-2.6.31-17-generic root=UUID=ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1 ro single
    initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (on /dev/sda9)" {
    insmod ext2
    set root=(hd0,9)
    search --no-floppy --fs-uuid --set ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1
    linux /boot/vmlinuz-2.6.31-16-generic root=UUID=ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1 ro quiet splash
    initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode) (on /dev/sda9)" {
    insmod ext2
    set root=(hd0,9)
    search --no-floppy --fs-uuid --set ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1
    linux /boot/vmlinuz-2.6.31-16-generic root=UUID=ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1 ro single
    initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu 9.04, kernel 2.6.28-16-generic (on /dev/sdb7)" {
    insmod ext2
    set root=(hd1,7)
    search --no-floppy --fs-uuid --set 1c721c8c-28df-47f8-b007-0605f08acf34
    linux /boot/vmlinuz-2.6.28-16-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro quiet splash
    initrd /boot/initrd.img-2.6.28-16-generic
}
menuentry "Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode) (on /dev/sdb7)" {
    insmod ext2
    set root=(hd1,7)
    search --no-floppy --fs-uuid --set 1c721c8c-28df-47f8-b007-0605f08acf34
    linux /boot/vmlinuz-2.6.28-16-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro single
    initrd /boot/initrd.img-2.6.28-16-generic
}
menuentry "Ubuntu 9.04, kernel 2.6.28-15-generic (on /dev/sdb7)" {
    insmod ext2
    set root=(hd1,7)
    search --no-floppy --fs-uuid --set 1c721c8c-28df-47f8-b007-0605f08acf34
    linux /boot/vmlinuz-2.6.28-15-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro quiet splash
    initrd /boot/initrd.img-2.6.28-15-generic
}
menuentry "Ubuntu 9.04, kernel 2.6.28-15-generic (recovery mode) (on /dev/sdb7)" {
    insmod ext2
    set root=(hd1,7)
    search --no-floppy --fs-uuid --set 1c721c8c-28df-47f8-b007-0605f08acf34
    linux /boot/vmlinuz-2.6.28-15-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro single
    initrd /boot/initrd.img-2.6.28-15-generic
}
menuentry "Ubuntu 9.04, memtest86+ (on /dev/sdb7)" {
    insmod ext2
    set root=(hd1,7)
    search --no-floppy --fs-uuid --set 1c721c8c-28df-47f8-b007-0605f08acf34
    linux /boot/memtest86+.bin 
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

============================= sda8/Wubi/etc/fstab: =============================

# /etc/fstab: static file system information.
#
#  -- This file has been automaticly generated by ntfs-config -- 
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>

proc /proc proc defaults 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
/dev/sdb5 /media/MAX160_VOL2 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda5 /media/MAX300_VOL2 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda1 /media/MAX300_VOL1 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0

================= sda8/Wubi: Location of files loaded by Grub: =================


    .0GB: boot/grub/grub.cfg
    .0GB: boot/initrd.img-2.6.31-16-generic
    .0GB: boot/initrd.img-2.6.31-17-generic
    .0GB: boot/vmlinuz-2.6.31-16-generic
    .0GB: boot/vmlinuz-2.6.31-17-generic
    .0GB: initrd.img
    .0GB: initrd.img.old
    .0GB: vmlinuz
    .0GB: vmlinuz.old

=========================== sda9/boot/grub/grub.cfg: ===========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
  have_grubenv=true
  load_env
fi
set default="6"
if [ ${prev_saved_entry} ]; then
  saved_entry=${prev_saved_entry}
  save_env saved_entry
  prev_saved_entry=
  save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,9)
search --no-floppy --fs-uuid --set ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=640x480
  insmod gfxterm
  insmod vbe
  if terminal_output gfxterm ; then true ; else
    # For backward compatibility with versions of terminal.mod that don't
    # understand terminal_output
    terminal gfxterm
  fi
fi
if [ ${recordfail} = 1 ]; then
  set timeout=-1
else
  set timeout=3
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-17-generic" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
    set quiet=1
    insmod ext2
    set root=(hd0,9)
    search --no-floppy --fs-uuid --set ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1
    linux    /boot/vmlinuz-2.6.31-17-generic root=UUID=ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1 ro   quiet splash
    initrd    /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode)" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
    insmod ext2
    set root=(hd0,9)
    search --no-floppy --fs-uuid --set ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1
    linux    /boot/vmlinuz-2.6.31-17-generic root=UUID=ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1 ro single 
    initrd    /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
    set quiet=1
    insmod ext2
    set root=(hd0,9)
    search --no-floppy --fs-uuid --set ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1
    linux    /boot/vmlinuz-2.6.31-16-generic root=UUID=ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1 ro   quiet splash
    initrd    /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode)" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
    insmod ext2
    set root=(hd0,9)
    search --no-floppy --fs-uuid --set ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1
    linux    /boot/vmlinuz-2.6.31-16-generic root=UUID=ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1 ro single 
    initrd    /boot/initrd.img-2.6.31-16-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
    linux16    /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
    linux16    /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows NT/2000/XP (loader) (on /dev/sda1)" {
    insmod ntfs
    set root=(hd0,1)
    search --no-floppy --fs-uuid --set 01c67bdebadc6540
    drivemap -s (hd0) ${root}
    chainloader +1
}
menuentry "Ubuntu 9.04, kernel 2.6.28-17-generic (on /dev/sdb7)" {
    insmod ext2
    set root=(hd1,7)
    search --no-floppy --fs-uuid --set 1c721c8c-28df-47f8-b007-0605f08acf34
    linux /boot/vmlinuz-2.6.28-17-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro quiet splash
    initrd /boot/initrd.img-2.6.28-17-generic
}
menuentry "Ubuntu 9.04, kernel 2.6.28-17-generic (recovery mode) (on /dev/sdb7)" {
    insmod ext2
    set root=(hd1,7)
    search --no-floppy --fs-uuid --set 1c721c8c-28df-47f8-b007-0605f08acf34
    linux /boot/vmlinuz-2.6.28-17-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro single
    initrd /boot/initrd.img-2.6.28-17-generic
}
menuentry "Ubuntu 9.04, kernel 2.6.28-16-generic (on /dev/sdb7)" {
    insmod ext2
    set root=(hd1,7)
    search --no-floppy --fs-uuid --set 1c721c8c-28df-47f8-b007-0605f08acf34
    linux /boot/vmlinuz-2.6.28-16-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro quiet splash
    initrd /boot/initrd.img-2.6.28-16-generic
}
menuentry "Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode) (on /dev/sdb7)" {
    insmod ext2
    set root=(hd1,7)
    search --no-floppy --fs-uuid --set 1c721c8c-28df-47f8-b007-0605f08acf34
    linux /boot/vmlinuz-2.6.28-16-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro single
    initrd /boot/initrd.img-2.6.28-16-generic
}
menuentry "Ubuntu 9.04, memtest86+ (on /dev/sdb7)" {
    insmod ext2
    set root=(hd1,7)
    search --no-floppy --fs-uuid --set 1c721c8c-28df-47f8-b007-0605f08acf34
    linux /boot/memtest86+.bin 
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

=============================== sda9/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
#  -- This file has been automaticly generated by ntfs-config -- 
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>

proc /proc proc defaults 0 0
# Entry for /dev/sda9 :
UUID=ac46dc67-62d5-4a3f-a3ac-c1f43f5d02e1 / ext4 errors=remount-ro 0 1
# Entry for /dev/sda10 :
UUID=35aa088f-d6a2-4ddf-b45c-b1e6bb0b72f4 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
/dev/sdb5 /media/MAX160_VOL2 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda8 /media/MAX300_VOL5 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda1 /media/MAX300_VOL1 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda5 /media/MAX300_VOL2 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0

=================== sda9: Location of files loaded by Grub: ===================


 247.6GB: boot/grub/core.img
 247.6GB: boot/grub/grub.cfg
 247.6GB: boot/initrd.img-2.6.31-16-generic
 247.6GB: boot/initrd.img-2.6.31-17-generic
 247.6GB: boot/vmlinuz-2.6.31-16-generic
 247.6GB: boot/vmlinuz-2.6.31-17-generic
 247.6GB: initrd.img
 247.6GB: initrd.img.old
 247.6GB: vmlinuz
 247.6GB: vmlinuz.old

=========================== sdb7/boot/grub/menu.lst: ===========================

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default        6

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout        5

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title        Windows 95/98/NT/2000
# root        (hd0,0)
# makeactive
# chainloader    +1
#
# title        Linux
# root        (hd0,1)
# kernel    /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=1c721c8c-28df-47f8-b007-0605f08acf34

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=2

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title        Ubuntu 9.04, kernel 2.6.28-17-generic
uuid        1c721c8c-28df-47f8-b007-0605f08acf34
kernel        /boot/vmlinuz-2.6.28-17-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro quiet splash 
initrd        /boot/initrd.img-2.6.28-17-generic
quiet

title        Ubuntu 9.04, kernel 2.6.28-17-generic (recovery mode)
uuid        1c721c8c-28df-47f8-b007-0605f08acf34
kernel        /boot/vmlinuz-2.6.28-17-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro  single
initrd        /boot/initrd.img-2.6.28-17-generic

title        Ubuntu 9.04, kernel 2.6.28-16-generic
uuid        1c721c8c-28df-47f8-b007-0605f08acf34
kernel        /boot/vmlinuz-2.6.28-16-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro quiet splash 
initrd        /boot/initrd.img-2.6.28-16-generic
quiet

title        Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode)
uuid        1c721c8c-28df-47f8-b007-0605f08acf34
kernel        /boot/vmlinuz-2.6.28-16-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro  single
initrd        /boot/initrd.img-2.6.28-16-generic

title        Ubuntu 9.04, memtest86+
uuid        1c721c8c-28df-47f8-b007-0605f08acf34
kernel        /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title        Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title        Windows NT/2000/XP (loader)
root        (hd1,0)        
makeactive            
map        (hd0) (hd1)    
map        (hd1) (hd0)    
chainloader    +1        


# Ubuntu 9.04 installé sur /dev/sda9
title        Ubuntu 9.04 en ext3   
root (hd0,8)
chainloader +1
boot


========================== sdb7/boot/grub/grub.conf: ==========================

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default        0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout        10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title        Windows 95/98/NT/2000
# root        (hd0,0)
# makeactive
# chainloader    +1
#
# title        Linux
# root        (hd0,1)
# kernel    /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=1c721c8c-28df-47f8-b007-0605f08acf34

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title        Ubuntu 9.04, kernel 2.6.28-11-generic
uuid        1c721c8c-28df-47f8-b007-0605f08acf34
kernel        /boot/vmlinuz-2.6.28-11-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro quiet splash 
initrd        /boot/initrd.img-2.6.28-11-generic
quiet

title        Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid        1c721c8c-28df-47f8-b007-0605f08acf34
kernel        /boot/vmlinuz-2.6.28-11-generic root=UUID=1c721c8c-28df-47f8-b007-0605f08acf34 ro  single
initrd        /boot/initrd.img-2.6.28-11-generic

title        Ubuntu 9.04, memtest86+
uuid        1c721c8c-28df-47f8-b007-0605f08acf34
kernel        /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title        Other operating systems:
root


# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title        Windows NT/2000/XP (loader)
rootnoverify    (hd0,0)
savedefault
makeactive
chainloader    +1


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda9.
title        Ubuntu 9.04, kernel 2.6.28-13-generic (on /dev/sda9)
root        (hd0,8)
kernel        /boot/vmlinuz-2.6.28-13-generic root=UUID=3596f4d9-feb1-4060-8633-39a9031a9fe1 ro quiet splash 
initrd        /boot/initrd.img-2.6.28-13-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda9.
title        Ubuntu 9.04, kernel 2.6.28-13-generic (recovery mode) (on /dev/sda9)
root        (hd0,8)
kernel        /boot/vmlinuz-2.6.28-13-generic root=UUID=3596f4d9-feb1-4060-8633-39a9031a9fe1 ro single 
initrd        /boot/initrd.img-2.6.28-13-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda9.
title        Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda9)
root        (hd0,8)
kernel        /boot/vmlinuz-2.6.28-11-generic root=UUID=3596f4d9-feb1-4060-8633-39a9031a9fe1 ro quiet splash 
initrd        /boot/initrd.img-2.6.28-11-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda9.
title        Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode) (on /dev/sda9)
root        (hd0,8)
kernel        /boot/vmlinuz-2.6.28-11-generic root=UUID=3596f4d9-feb1-4060-8633-39a9031a9fe1 ro single 
initrd        /boot/initrd.img-2.6.28-11-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda9.
title        Ubuntu 9.04, memtest86+ (on /dev/sda9)
root        (hd0,8)
kernel        /boot/memtest86+.bin  
savedefault
boot


=============================== sdb7/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
#  -- This file has been automaticly generated by ntfs-config -- 
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>

proc /proc proc defaults 0 0
# Entry for /dev/sdb7 :
UUID=1c721c8c-28df-47f8-b007-0605f08acf34 / ext4 relatime,errors=remount-ro 0 1
# Entry for /dev/sda10 :
UUID=35aa088f-d6a2-4ddf-b45c-b1e6bb0b72f4 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
/dev/sda8 /media/MAX300_VOL5 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda5 /media/MAX300_VOL2 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda12 /media/sda12 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda1 /media/MAX300_VOL1 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb5 /media/MAX160_VOL2 ntfs-3g defaults,locale=fr_FR.UTF-8 0 0

=================== sdb7: Location of files loaded by Grub: ===================


 158.6GB: boot/grub/grub.conf
 158.6GB: boot/grub/menu.lst
 158.6GB: boot/grub/stage2
 158.6GB: boot/initrd.img-2.6.28-11-generic
 158.6GB: boot/initrd.img-2.6.28-13-generic
 158.6GB: boot/initrd.img-2.6.28-14-generic
 158.6GB: boot/initrd.img-2.6.28-15-generic
 158.6GB: boot/initrd.img-2.6.28-16-generic
 158.6GB: boot/initrd.img-2.6.28-17-generic
 158.6GB: boot/vmlinuz-2.6.28-11-generic
 158.6GB: boot/vmlinuz-2.6.28-13-generic
 158.6GB: boot/vmlinuz-2.6.28-14-generic
 158.6GB: boot/vmlinuz-2.6.28-15-generic
 158.6GB: boot/vmlinuz-2.6.28-16-generic
 158.6GB: boot/vmlinuz-2.6.28-17-generic
 158.6GB: initrd.img
 158.6GB: initrd.img.old
 158.6GB: vmlinuz
 158.6GB: vmlinuz.old

ATTENTION : je répète qu'il ne faut pas poster ici votre résultat obtenu avec le script bootinfoscript : ce résultat, il faut le poster dans la discussion où vous avez posté récemment pour demander de l'aide pour votre problème. Moi je ne répondrai pas ici et j'espère que personne ne vous répondra non plus

Mise à jour : le 19 mai 2011 après sortie de la version 0.60 du bootinfoscript, avec suppression des indications dans le cas d'une session sur Ubuntu installé sur disque dur.
Mise à jour le 5 avril 2012 après sortie de la version 0.61 du bootinfoscript

Dernière modification par malbo (Le 05/04/2012, à 06:31)

Hors ligne

#2 Le 22/01/2010, à 09:12

malbo

Re : [HOW TO] bootinfoscript

Et le résultat obtenu sur mon PC Acer depuis une session live CD Ubuntu 9.10 :

============================= Boot Info Summary: ==============================

 => Grub 1.97 is installed in the MBR of /dev/sda and looks on the same drive 
    in partition #6 for /boot/grub.
 => Grub 1.97 is installed in the MBR of /dev/sdb and looks on the same drive 
    in partition #5 for /boot/grub.
sda1: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows XP
    Boot files/dirs:   /boot.ini /Boot/BCD /ntldr /NTDETECT.COM /wubildr.mbr

sda2: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 7
    Boot files/dirs:   /Windows/System32/winload.exe

sda3: _________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info:  

sda5: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files/dirs:   

sda6: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:  
    Operating System:  Ubuntu 9.10
    Boot files/dirs:   /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sda7: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info:  

sda8: _________________________________________________________________________

    File system:       ext3
    Boot sector type:  -
    Boot sector info:  
    Operating System:  
    Boot files/dirs:   

sda4: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  Grub
    Boot sector info:  Grub 0.97 is installed in the boot sector of sda4 and 
                       looks at sector 863321864 of the same hard drive for 
                       the stage2 file. A stage2 file is at this location on 
                       /dev/sda. Stage2 looks on partition #4 for 
                       /boot/grub/menu.lst.
    Operating System:  Mandriva Linux release 2010.0 
                       (Official) for x86_64 Kernel 2.6.31.5-desktop-1mnb on 
                       a 4-processor x86_64 /
    Boot files/dirs:   /boot/grub/menu.lst /etc/fstab

sdb1: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows Vista
    Boot files/dirs:   /bootmgr /Boot/BCD /Windows/System32/winload.exe

sdb2: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows XP
    Boot files/dirs:   /boot.ini /ntldr /NTDETECT.COM /wubildr.mbr

sdb3: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info:  

sdb4: _________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info:  

sdb5: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:  
    Operating System:  Ubuntu 9.10
    Boot files/dirs:   /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sdb6: _________________________________________________________________________

    File system:       ext3
    Boot sector type:  -
    Boot sector info:  
    Operating System:  
    Boot files/dirs:   

sdb7: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files/dirs:   

sdb8: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files/dirs:   /ubuntu/winboot/wubildr.mbr /ubuntu/disks/root.disk 
                       /ubuntu/disks/swap.disk

sdb8/Wubi: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:  
    Operating System:  Ubuntu 9.10
    Boot files/dirs:   /boot/grub/grub.cfg /etc/fstab

sdb9: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 7
    Boot files/dirs:   /Windows/System32/winload.exe

=========================== Drive/Partition Info: =============================

Drive: sda ___________________ _____________________________________________________

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x00037dc9

Partition  Boot         Start           End          Size  Id System

/dev/sda1    *         32,130    62,541,044    62,508,915   7 HPFS/NTFS
/dev/sda2          62,541,045   205,166,114   142,625,070   7 HPFS/NTFS
/dev/sda3         205,166,115   855,557,639   650,391,525   5 Extended
/dev/sda5         205,166,178   720,595,574   515,429,397   7 HPFS/NTFS
/dev/sda6         720,595,638   741,094,514    20,498,877  83 Linux
/dev/sda7         741,094,578   751,456,439    10,361,862  82 Linux swap / Solaris
/dev/sda8         751,456,503   855,557,639   104,101,137  83 Linux
/dev/sda4         855,557,640   976,768,064   121,210,425  83 Linux


Drive: sdb ___________________ _____________________________________________________

Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xa9e4f6a8

Partition  Boot         Start           End          Size  Id System

/dev/sdb1    *             63    63,215,774    63,215,712   7 HPFS/NTFS
/dev/sdb2          63,215,775    83,698,649    20,482,875   7 HPFS/NTFS
/dev/sdb3          83,698,650    95,988,374    12,289,725  82 Linux swap / Solaris
/dev/sdb4          95,988,375 1,953,520,064 1,857,531,690   5 Extended
/dev/sdb5          95,988,438   126,704,654    30,716,217  83 Linux
/dev/sdb6         126,704,718   249,585,839   122,881,122  83 Linux
/dev/sdb7         249,585,903   270,550,664    20,964,762   7 HPFS/NTFS
/dev/sdb8         270,550,728 1,870,029,247 1,599,478,520   7 HPFS/NTFS
/dev/sdb9       1,870,030,323 1,953,520,064    83,489,742   7 HPFS/NTFS


blkid -c /dev/null: ____________________________________________________________

/dev/loop0: TYPE="squashfs" 
/dev/loop1: UUID="764b3c1b-970e-44b8-b4c5-281399488294" TYPE="ext4" 
/dev/sda1: UUID="5AF42CCBF42CAB69" LABEL="XP_PRO" TYPE="ntfs" 
/dev/sda2: UUID="5B1A1BA60DEDD299" LABEL="seven sur hitachi" TYPE="ntfs" 
/dev/sda4: LABEL="mandriva" UUID="c0dce78e-d94d-4fbc-90fd-7b5046297be0" TYPE="ext4" 
/dev/sda5: UUID="128CBF065FE0D822" LABEL="DATA_XP" TYPE="ntfs" 
/dev/sda6: UUID="97c19c6f-3fc8-4d00-a67d-111915059b4c" TYPE="ext4" 
/dev/sda7: UUID="9e81fbe1-7d4e-2d93-4344-80a93a548991" TYPE="swap" 
/dev/sda8: UUID="89346a36-0511-4685-9c5e-46ae59401e1a" SEC_TYPE="ext2" TYPE="ext3" 
/dev/sdb1: UUID="66E4D82BE4D7FB6F" LABEL="VISTA" TYPE="ntfs" 
/dev/sdb2: UUID="6EB097EFB097BC51" LABEL="XP LEGER" TYPE="ntfs" 
/dev/sdb3: UUID="852820a7-1551-4cff-9aeb-a843085b7815" TYPE="swap" 
/dev/sdb5: UUID="c27e7454-6747-448a-9a7b-97352f4c1676" TYPE="ext4" 
/dev/sdb6: UUID="1952eb9c-ef8f-4585-b65f-43a8822b8daa" SEC_TYPE="ext2" TYPE="ext3" 
/dev/sdb7: UUID="417516424CE2345F" TYPE="ntfs" 
/dev/sdb8: UUID="6EFDDDA001845237" LABEL="StockageNTFS" TYPE="ntfs" 
/dev/sdb9: UUID="38852FB86E150005" LABEL="seven" TYPE="ntfs" 

=============================== "mount" output: ===============================

aufs on / type aufs (rw)
none on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
/dev/sr0 on /cdrom type iso9660 (rw)
/dev/loop0 on /rofs type squashfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)


================================ sda1/boot.ini: ================================

[boot loader]

timeout=7

default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS

[operating systems]

multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professionnel" /NOEXECUTE=OPTIN /FASTDETECT

multi(0)disk(0)rdisk(1)partition(2)\WINDOWS="XP LEGER" /noexecute=optin /fastdetect

c:\CMDCONS\BOOTSECT.DAT="Console de r‚cup‚ration Microsoft Windows XP" /CMDCONS

C:\wubildr.mbr = "Ubuntu"


=========================== sda6/boot/grub/grub.cfg: ===========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
  have_grubenv=true
  load_env
fi
set default="6"
if [ ${prev_saved_entry} ]; then
  saved_entry=${prev_saved_entry}
  save_env saved_entry
  prev_saved_entry=
  save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=640x480
  insmod gfxterm
  insmod vbe
  if terminal_output gfxterm ; then true ; else
    # For backward compatibility with versions of terminal.mod that don't
    # understand terminal_output
    terminal gfxterm
  fi
fi
if [ ${recordfail} = 1 ]; then
  set timeout=-1
else
  set timeout=3
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-17-generic" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	set quiet=1
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux	/boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro   quiet splash
	initrd	/boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode)" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux	/boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single 
	initrd	/boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	set quiet=1
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux	/boot/vmlinuz-2.6.31-16-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro   quiet splash
	initrd	/boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode)" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux	/boot/vmlinuz-2.6.31-16-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single 
	initrd	/boot/initrd.img-2.6.31-16-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	linux16	/boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows NT/2000/XP (loader) (on /dev/sda1)" {
	insmod ntfs
	set root=(hd0,1)
	search --no-floppy --fs-uuid --set 5af42ccbf42cab69
	drivemap -s (hd0) ${root}
	chainloader +1
}
menuentry "linux (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
	linux /boot/vmlinuz BOOT_IMAGE=linux root=LABEL=mandriva resume=UUID=852820a7-1551-4cff-9aeb-a843085b7815 splash=silent vga=788
	initrd (hd0,3)/boot/initrd.img
}
menuentry "linux-nonfb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
	linux /boot/vmlinuz BOOT_IMAGE=linux-nonfb root=LABEL=mandriva resume=UUID=852820a7-1551-4cff-9aeb-a843085b7815
	initrd (hd0,3)/boot/initrd.img
}
menuentry "failsafe (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
	linux /boot/vmlinuz BOOT_IMAGE=failsafe root=LABEL=mandriva failsafe
	initrd (hd0,3)/boot/initrd.img
}
menuentry "desktop 2.6.31.5-1mnb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
	linux /boot/vmlinuz-2.6.31.5-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.5-1mnb root=LABEL=mandriva resume=UUID=852820a7-1551-4cff-9aeb-a843085b7815 splash=silent vga=788
	initrd (hd0,3)/boot/initrd-2.6.31.5-desktop-1mnb.img
}
menuentry "desktop 2.6.31.6-1mnb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
	linux /boot/vmlinuz-2.6.31.6-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.6-1mnb root=LABEL=mandriva resume=UUID=852820a7-1551-4cff-9aeb-a843085b7815 splash=silent vga=788
	initrd (hd0,3)/boot/initrd-2.6.31.6-desktop-1mnb.img
}
menuentry "Windows 7 (loader) (on /dev/sdb1)" {
	insmod ntfs
	set root=(hd1,1)
	search --no-floppy --fs-uuid --set 66e4d82be4d7fb6f
	chainloader +1
}
menuentry "Windows NT/2000/XP (loader) (on /dev/sdb2)" {
	insmod ntfs
	set root=(hd1,2)
	search --no-floppy --fs-uuid --set 6eb097efb097bc51
	drivemap -s (hd0) ${root}
	chainloader +1
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-17-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
	initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode) (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-17-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
	initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
	initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode) (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
	initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
	initrd /boot/initrd.img-2.6.31-15-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (recovery mode) (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
	initrd /boot/initrd.img-2.6.31-15-generic
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.

menuentry "mandriva par chainload vers sda4" {
    insmod ext2
    set root=(hd0,4)
    chainloader +1
}

### END /etc/grub.d/40_custom ###

=============================== sda6/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
#  -- This file has been automaticly generated by ntfs-config -- 
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>

proc /proc proc defaults 0 0
# Entry for /dev/sda6 :
UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c / ext4 errors=remount-ro 0 1
# Entry for /dev/sda7 :
UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 none swap sw 0 0
# Entry for /dev/sdb3 :
UUID=852820a7-1551-4cff-9aeb-a843085b7815 none swap sw 0 0
/dev/sdb9 /media/seven ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb1 /media/VISTA ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb2 /media/XP\040LEGER ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb8 /media/StockageNTFS ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda5 /media/DATA_XP ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda2 /media/seven\040sur\040hitachi ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda1 /media/XP_PRO ntfs-3g defaults,locale=fr_FR.UTF-8 0 0

=================== sda6: Location of files loaded by Grub: ===================


 368.9GB: boot/grub/core.img
 368.9GB: boot/grub/grub.cfg
 368.9GB: boot/initrd.img-2.6.31-16-generic
 368.9GB: boot/initrd.img-2.6.31-17-generic
 368.9GB: boot/vmlinuz-2.6.31-16-generic
 368.9GB: boot/vmlinuz-2.6.31-17-generic
 368.9GB: initrd.img
 368.9GB: initrd.img.old
 368.9GB: vmlinuz
 368.9GB: vmlinuz.old

=========================== sda4/boot/grub/menu.lst: ===========================

timeout 10
color black/cyan yellow/cyan
gfxmenu (hd0,3)/boot/gfxmenu
default 0

title linux
kernel (hd0,3)/boot/vmlinuz BOOT_IMAGE=linux root=LABEL=mandriva resume=UUID=852820a7-1551-4cff-9aeb-a843085b7815 splash=silent vga=788
initrd (hd0,3)/boot/initrd.img

title linux-nonfb
kernel (hd0,3)/boot/vmlinuz BOOT_IMAGE=linux-nonfb root=LABEL=mandriva resume=UUID=852820a7-1551-4cff-9aeb-a843085b7815
initrd (hd0,3)/boot/initrd.img

title failsafe
kernel (hd0,3)/boot/vmlinuz BOOT_IMAGE=failsafe root=LABEL=mandriva failsafe
initrd (hd0,3)/boot/initrd.img

title windows
root (hd0,0)
makeactive
chainloader +1

title windows1
root (hd1,0)
map (0x81) (0x80)
map (0x80) (0x81)
makeactive
chainloader +1

title desktop 2.6.31.5-1mnb
kernel (hd0,3)/boot/vmlinuz-2.6.31.5-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.5-1mnb root=LABEL=mandriva resume=UUID=852820a7-1551-4cff-9aeb-a843085b7815 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.31.5-desktop-1mnb.img

title desktop 2.6.31.6-1mnb
kernel (hd0,3)/boot/vmlinuz-2.6.31.6-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.6-1mnb root=LABEL=mandriva resume=UUID=852820a7-1551-4cff-9aeb-a843085b7815 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.31.6-desktop-1mnb.img

=============================== sda4/etc/fstab: ===============================

# Entry for /dev/sda4 :
LABEL=mandriva / ext4 relatime 1 1
/dev/cdrom /media/cdrom auto umask=0,users,iocharset=utf8,noauto,ro,exec 0 0
# Entry for /dev/sda1 :
UUID=5AF42CCBF42CAB69 /media/win_c ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sdb1 :
UUID=66E4D82BE4D7FB6F /media/win_c2 ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sda5 :
UUID=128CBF065FE0D822 /media/win_d ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sdb7 :
UUID=417516424CE2345F /media/win_d2 ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sda2 :
UUID=5B1A1BA60DEDD299 /media/win_e ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sdb8 :
UUID=6EFDDDA001845237 /media/win_e2 ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sdb9 :
UUID=38852FB86E150005 /media/win_f ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sdb2 :
UUID=6EB097EFB097BC51 /media/win_g ntfs-3g defaults,umask=000 0 0
none /proc proc defaults 0 0
# Entry for /dev/sda7 :
UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 swap swap defaults 0 0
# Entry for /dev/sdb3 :
UUID=852820a7-1551-4cff-9aeb-a843085b7815 swap swap defaults 0 0

=================== sda4: Location of files loaded by Grub: ===================


 438.0GB: boot/grub/menu.lst
 438.0GB: boot/grub/stage2
 438.0GB: boot/initrd-2.6.31.5-desktop-1mnb.img
 438.0GB: boot/initrd-2.6.31.6-desktop-1mnb.img
 438.0GB: boot/initrd-desktop.img
 438.0GB: boot/initrd.img
 438.0GB: boot/vmlinuz
 438.0GB: boot/vmlinuz-2.6.31.5-desktop-1mnb
 438.0GB: boot/vmlinuz-2.6.31.6-desktop-1mnb
 438.0GB: boot/vmlinuz-desktop

================================ sdb2/boot.ini: ================================

[boot loader]

timeout=10

default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS

[operating systems]

multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="Microsoft Windows XP Professionnel" /NOEXECUTE=OPTIN /FASTDETECT

multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="XP LEGER" /noexecute=optin /fastdetect

c:\CMDCONS\BOOTSECT.DAT="Console de r‚cup‚ration Microsoft Windows XP" /CMDCONS

C:\wubildr.mbr = "Ubuntu"


=========================== sdb5/boot/grub/grub.cfg: ===========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
  have_grubenv=true
  load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
  saved_entry=${prev_saved_entry}
  save_env saved_entry
  prev_saved_entry=
  save_env prev_saved_entry
fi
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=640x480
  insmod gfxterm
  insmod vbe
  if terminal_output gfxterm ; then true ; else
    # For backward compatibility with versions of terminal.mod that don't
    # understand terminal_output
    terminal gfxterm
  fi
fi
if [ ${recordfail} = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-17-generic" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	set quiet=1
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux	/boot/vmlinuz-2.6.31-17-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro   quiet splash
	initrd	/boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode)" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux	/boot/vmlinuz-2.6.31-17-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single 
	initrd	/boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	set quiet=1
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux	/boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro   quiet splash
	initrd	/boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode)" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux	/boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single 
	initrd	/boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	set quiet=1
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux	/boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro   quiet splash
	initrd	/boot/initrd.img-2.6.31-15-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (recovery mode)" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux	/boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single 
	initrd	/boot/initrd.img-2.6.31-15-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	linux16	/boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows NT/2000/XP (loader) (on /dev/sda1)" {
	insmod ntfs
	set root=(hd0,1)
	search --no-floppy --fs-uuid --set 5af42ccbf42cab69
	drivemap -s (hd0) ${root}
	chainloader +1
}
menuentry "linux (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
	linux /boot/vmlinuz BOOT_IMAGE=linux root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
	initrd (hd0,3)/boot/initrd.img
}
menuentry "linux-nonfb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
	linux /boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991
	initrd (hd0,3)/boot/initrd.img
}
menuentry "failsafe (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
	linux /boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c failsafe
	initrd (hd0,3)/boot/initrd.img
}
menuentry "2.6.27-desktop586rc8-2mnb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
	linux /boot/vmlinuz-2.6.27-desktop586-0.rc8.2mnb BOOT_IMAGE=2.6.27-desktop586rc8-2mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
	initrd (hd0,3)/boot/initrd-2.6.27-desktop586-0.rc8.2mnb.img
}
menuentry "desktop586 2.6.27.4-2mnb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
	linux /boot/vmlinuz-2.6.27.4-desktop586-2mnb BOOT_IMAGE=desktop586_2.6.27.4-2mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
	initrd (hd0,3)/boot/initrd-2.6.27.4-desktop586-2mnb.img
}
menuentry "desktop586 2.6.27.5-2mnb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
	linux /boot/vmlinuz-2.6.27.5-desktop586-2mnb BOOT_IMAGE=desktop586_2.6.27.5-2mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
	initrd (hd0,3)/boot/initrd-2.6.27.5-desktop586-2mnb.img
}
menuentry "desktop586 2.6.27.7-1mnb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
	linux /boot/vmlinuz-2.6.27.7-desktop586-1mnb BOOT_IMAGE=desktop586_2.6.27.7-1mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
	initrd (hd0,3)/boot/initrd-2.6.27.7-desktop586-1mnb.img
}
menuentry "desktop586 2.6.27.19-1mnb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
	linux /boot/vmlinuz-2.6.27.19-desktop586-1mnb BOOT_IMAGE=desktop586_2.6.27.19-1mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
	initrd (hd0,3)/boot/initrd-2.6.27.19-desktop586-1mnb.img
}
menuentry "desktop586 2.6.27.21-1mnb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
	linux /boot/vmlinuz-2.6.27.21-desktop586-1mnb BOOT_IMAGE=desktop586_2.6.27.21-1mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
	initrd (hd0,3)/boot/initrd-2.6.27.21-desktop586-1mnb.img
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (on /dev/sda6)" {
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux /boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro quiet splash
	initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode) (on /dev/sda6)" {
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux /boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single
	initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (on /dev/sda6)" {
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux /boot/vmlinuz-2.6.31-16-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro quiet splash
	initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode) (on /dev/sda6)" {
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux /boot/vmlinuz-2.6.31-16-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single
	initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Windows 7 (loader) (on /dev/sdb1)" {
	insmod ntfs
	set root=(hd1,1)
	search --no-floppy --fs-uuid --set 66e4d82be4d7fb6f
	chainloader +1
}
menuentry "Windows NT/2000/XP (loader) (on /dev/sdb2)" {
	insmod ntfs
	set root=(hd1,2)
	search --no-floppy --fs-uuid --set 6eb097efb097bc51
	drivemap -s (hd0) ${root}
	chainloader +1
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

=============================== sdb5/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
#  -- This file has been automaticly generated by ntfs-config -- 
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>

proc /proc proc defaults 0 0
# Entry for /dev/sdb5 :
UUID=c27e7454-6747-448a-9a7b-97352f4c1676 / ext4 errors=remount-ro 0 1
# Entry for /dev/sda7 :
UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 none swap sw 0 0
# Entry for /dev/sdb3 :
UUID=852820a7-1551-4cff-9aeb-a843085b7815 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/sdb8 /media/StockageNTFS ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb9 /media/seven ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb1 /media/ACER ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb2 /media/XP\040LEGER ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda5 /media/DATA_XP ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda2 /media/seven\040sur\040hitachi ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda1 /media/XP_PRO ntfs-3g defaults,locale=fr_FR.UTF-8 0 0

=================== sdb5: Location of files loaded by Grub: ===================


  49.1GB: boot/grub/core.img
  49.1GB: boot/grub/grub.cfg
  49.1GB: boot/initrd.img-2.6.31-15-generic
  49.1GB: boot/initrd.img-2.6.31-16-generic
  49.1GB: boot/initrd.img-2.6.31-17-generic
  49.1GB: boot/vmlinuz-2.6.31-15-generic
  49.1GB: boot/vmlinuz-2.6.31-16-generic
  49.1GB: boot/vmlinuz-2.6.31-17-generic
  49.1GB: initrd.img
  49.1GB: initrd.img.old
  49.1GB: vmlinuz
  49.1GB: vmlinuz.old

======================== sdb8/Wubi/boot/grub/grub.cfg: ========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
  have_grubenv=true
  load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
  saved_entry=${prev_saved_entry}
  save_env saved_entry
  prev_saved_entry=
  save_env prev_saved_entry
fi
if [ ${recordfail} = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
menuentry "Ubuntu, Linux 2.6.31-17-generic" {
	insmod ntfs
	set root=(hd1,8)
	search --no-floppy --fs-uuid --set 6efddda001845237
	loopback loop0 /ubuntu/disks/root.disk
	set root=(loop0)
	linux /boot/vmlinuz-2.6.31-17-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro   quiet splash
	initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode)" {
	insmod ntfs
	set root=(hd1,8)
	search --no-floppy --fs-uuid --set 6efddda001845237
	loopback loop0 /ubuntu/disks/root.disk
	set root=(loop0)
	linux /boot/vmlinuz-2.6.31-17-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro single 
	initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic" {
	insmod ntfs
	set root=(hd1,8)
	search --no-floppy --fs-uuid --set 6efddda001845237
	loopback loop0 /ubuntu/disks/root.disk
	set root=(loop0)
	linux /boot/vmlinuz-2.6.31-16-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro   quiet splash
	initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode)" {
	insmod ntfs
	set root=(hd1,8)
	search --no-floppy --fs-uuid --set 6efddda001845237
	loopback loop0 /ubuntu/disks/root.disk
	set root=(loop0)
	linux /boot/vmlinuz-2.6.31-16-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro single 
	initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic" {
	insmod ntfs
	set root=(hd1,8)
	search --no-floppy --fs-uuid --set 6efddda001845237
	loopback loop0 /ubuntu/disks/root.disk
	set root=(loop0)
	linux /boot/vmlinuz-2.6.31-15-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro   quiet splash
	initrd /boot/initrd.img-2.6.31-15-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (recovery mode)" {
	insmod ntfs
	set root=(hd1,8)
	search --no-floppy --fs-uuid --set 6efddda001845237
	loopback loop0 /ubuntu/disks/root.disk
	set root=(loop0)
	linux /boot/vmlinuz-2.6.31-15-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro single 
	initrd /boot/initrd.img-2.6.31-15-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
	insmod ntfs
	set root=(hd1,8)
	search --no-floppy --fs-uuid --set 6efddda001845237
	loopback loop0 /ubuntu/disks/root.disk
	set root=(loop0)
	linux /boot/vmlinuz-2.6.31-14-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro   quiet splash
	initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
	insmod ntfs
	set root=(hd1,8)
	search --no-floppy --fs-uuid --set 6efddda001845237
	loopback loop0 /ubuntu/disks/root.disk
	set root=(loop0)
	linux /boot/vmlinuz-2.6.31-14-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro single 
	initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows NT/2000/XP (loader) (on /dev/sda1)" {
	insmod ntfs
	set root=(hd0,1)
	search --no-floppy --fs-uuid --set 5af42ccbf42cab69
	drivemap -s (hd0) ${root}
	chainloader +1
}
menuentry "linux (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
	linux /boot/vmlinuz BOOT_IMAGE=linux root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
	initrd (hd0,3)/boot/initrd.img
}
menuentry "linux-nonfb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
	linux /boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991
	initrd (hd0,3)/boot/initrd.img
}
menuentry "failsafe (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
	linux /boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c failsafe
	initrd (hd0,3)/boot/initrd.img
}
menuentry "2.6.27-desktop586rc8-2mnb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
	linux /boot/vmlinuz-2.6.27-desktop586-0.rc8.2mnb BOOT_IMAGE=2.6.27-desktop586rc8-2mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
	initrd (hd0,3)/boot/initrd-2.6.27-desktop586-0.rc8.2mnb.img
}
menuentry "desktop586 2.6.27.4-2mnb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
	linux /boot/vmlinuz-2.6.27.4-desktop586-2mnb BOOT_IMAGE=desktop586_2.6.27.4-2mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
	initrd (hd0,3)/boot/initrd-2.6.27.4-desktop586-2mnb.img
}
menuentry "desktop586 2.6.27.5-2mnb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
	linux /boot/vmlinuz-2.6.27.5-desktop586-2mnb BOOT_IMAGE=desktop586_2.6.27.5-2mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
	initrd (hd0,3)/boot/initrd-2.6.27.5-desktop586-2mnb.img
}
menuentry "desktop586 2.6.27.7-1mnb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
	linux /boot/vmlinuz-2.6.27.7-desktop586-1mnb BOOT_IMAGE=desktop586_2.6.27.7-1mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
	initrd (hd0,3)/boot/initrd-2.6.27.7-desktop586-1mnb.img
}
menuentry "desktop586 2.6.27.19-1mnb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
	linux /boot/vmlinuz-2.6.27.19-desktop586-1mnb BOOT_IMAGE=desktop586_2.6.27.19-1mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
	initrd (hd0,3)/boot/initrd-2.6.27.19-desktop586-1mnb.img
}
menuentry "desktop586 2.6.27.21-1mnb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set 98c5aa90-1fde-4528-8dd1-81136de4a48c
	linux /boot/vmlinuz-2.6.27.21-desktop586-1mnb BOOT_IMAGE=desktop586_2.6.27.21-1mnb root=UUID=98c5aa90-1fde-4528-8dd1-81136de4a48c resume=UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 splash=silent vga=788
	initrd (hd0,3)/boot/initrd-2.6.27.21-desktop586-1mnb.img
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (on /dev/sda6)" {
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux /boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro quiet splash
	initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode) (on /dev/sda6)" {
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux /boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single
	initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (on /dev/sda6)" {
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux /boot/vmlinuz-2.6.31-16-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro quiet splash
	initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode) (on /dev/sda6)" {
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux /boot/vmlinuz-2.6.31-16-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single
	initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Windows 7 (loader) (on /dev/sdb1)" {
	insmod ntfs
	set root=(hd1,1)
	search --no-floppy --fs-uuid --set 66e4d82be4d7fb6f
	chainloader +1
}
menuentry "Windows NT/2000/XP (loader) (on /dev/sdb2)" {
	insmod ntfs
	set root=(hd1,2)
	search --no-floppy --fs-uuid --set 6eb097efb097bc51
	drivemap -s (hd0) ${root}
	chainloader +1
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
	initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode) (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
	initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
	initrd /boot/initrd.img-2.6.31-15-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (recovery mode) (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
	initrd /boot/initrd.img-2.6.31-15-generic
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

============================= sdb8/Wubi/etc/fstab: =============================

# /etc/fstab: static file system information.
#
#  -- This file has been automaticly generated by ntfs-config -- 
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>

proc /proc proc defaults 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
/dev/sda5 /media/DATA_XP ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb2 /media/XP\040LEGER ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb1 /media/VISTA ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb9 /media/seven ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda2 /media/seven\040sur\040hitachi ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda1 /media/XP_PRO ntfs-3g defaults,locale=fr_FR.UTF-8 0 0

================= sdb8/Wubi: Location of files loaded by Grub: =================


    .0GB: boot/grub/grub.cfg
    .0GB: boot/initrd.img-2.6.31-14-generic
    .0GB: boot/initrd.img-2.6.31-15-generic
    .0GB: boot/initrd.img-2.6.31-16-generic
    .0GB: boot/initrd.img-2.6.31-17-generic
    .0GB: boot/vmlinuz-2.6.31-14-generic
    .0GB: boot/vmlinuz-2.6.31-15-generic
    .0GB: boot/vmlinuz-2.6.31-16-generic
    .0GB: boot/vmlinuz-2.6.31-17-generic
    .0GB: initrd.img
    .0GB: initrd.img.old
    .0GB: vmlinuz
    .0GB: vmlinuz.old
=======Devices which don't seem to have a corresponding hard drive==============

sdc sdd sde sdf

Dernière modification par malbo (Le 22/01/2010, à 09:29)

Hors ligne

#3 Le 25/01/2010, à 11:18

superwanus

Re : [HOW TO] bootinfoscript

bon,bah voila ce que ça donne pour moi...

============================= Boot Info Summary: ==============================

 => Grub 1.97 is installed in the MBR of /dev/sda and looks on the same drive 
    in partition #6 for /boot/grub.
 => Grub 0.97 is installed in the MBR of /dev/sdb and looks on the same drive 
    in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
sda1: _________________________________________________________________________

    File system:       ext3
    Boot sector type:  -
    Boot sector info:  
    Operating System:  Ubuntu 8.10
    Boot files/dirs:   /boot/grub/menu.lst /etc/fstab

sda2: _________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info:  

sda5: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info:  

sda6: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:  
    Operating System:  Ubuntu 9.10
    Boot files/dirs:   /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sda7: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info:  

sdb1: _________________________________________________________________________

    File system:       ext3
    Boot sector type:  -
    Boot sector info:  
    Operating System:  Ubuntu 9.04
    Boot files/dirs:   /boot/grub/menu.lst /etc/fstab

sdb2: _________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info:  

sdb5: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info:  

=========================== Drive/Partition Info: =============================

Drive: sda ___________________ _____________________________________________________

Disque /dev/sda: 160.0 Go, 160041885696 octets
255 têtes, 63 secteurs/piste, 19457 cylindres, total 312581808 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Identifiant de disque : 0x000a5f70

Partition  Boot         Start           End          Size  Id System

/dev/sda1    *             63   154,272,194   154,272,132  83 Linux
/dev/sda2         154,272,195   312,576,704   158,304,510   5 Extended
/dev/sda5         305,395,713   312,576,704     7,180,992  82 Linux swap / Solaris
/dev/sda6         154,272,321   299,146,364   144,874,044  83 Linux
/dev/sda7         299,146,428   305,395,649     6,249,222  82 Linux swap / Solaris


Drive: sdb ___________________ _____________________________________________________

Disque /dev/sdb: 160.0 Go, 160041885696 octets
255 têtes, 63 secteurs/piste, 19457 cylindres, total 312581808 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Identifiant de disque : 0x10474f41

Partition  Boot         Start           End          Size  Id System

/dev/sdb1    *             63   306,648,719   306,648,657  83 Linux
/dev/sdb2         306,648,720   312,576,704     5,927,985   5 Extended
/dev/sdb5         306,648,783   312,576,704     5,927,922  82 Linux swap / Solaris


blkid -c /dev/null: ____________________________________________________________

/dev/loop0: TYPE="squashfs" 
/dev/sda1: UUID="432c1620-42bb-492e-ac24-417bca179434" TYPE="ext3" 
/dev/sda5: UUID="393e15cc-9896-413a-8707-30ceecff3341" TYPE="swap" 
/dev/sda6: UUID="ffd9211b-6021-4f90-9428-18ba6625c507" TYPE="ext4" 
/dev/sda7: UUID="067429a5-6ba2-49fb-a718-60b023b12d26" TYPE="swap" 
/dev/sdb1: UUID="0db81fe1-984b-4429-b202-b17a3f8c35c0" TYPE="ext3" 
/dev/sdb5: UUID="72af050b-5dd4-47c1-932b-4b4b03b2a29a" TYPE="swap" 

=============================== "mount" output: ===============================

aufs on / type aufs (rw)
none on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
/dev/sr0 on /cdrom type iso9660 (rw)
/dev/loop0 on /rofs type squashfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
/dev/sda1 on /media/432c1620-42bb-492e-ac24-417bca179434 type ext3 (rw,nosuid,nodev,uhelper=devkit)
/dev/sda6 on /media/ffd9211b-6021-4f90-9428-18ba6625c507 type ext4 (rw,nosuid,nodev,uhelper=devkit)
/dev/sdb1 on /media/0db81fe1-984b-4429-b202-b17a3f8c35c0 type ext3 (rw,nosuid,nodev,uhelper=devkit)


=========================== sda1/boot/grub/menu.lst: ===========================

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default		0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout		3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title		Windows 95/98/NT/2000
# root		(hd0,0)
# makeactive
# chainloader	+1
#
# title		Linux
# root		(hd0,1)
# kernel	/vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=432c1620-42bb-492e-ac24-417bca179434 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=432c1620-42bb-492e-ac24-417bca179434

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title		Ubuntu 8.10, kernel 2.6.27-7-generic
uuid		432c1620-42bb-492e-ac24-417bca179434
kernel		/boot/vmlinuz-2.6.27-7-generic root=UUID=432c1620-42bb-492e-ac24-417bca179434 ro quiet splash 
initrd		/boot/initrd.img-2.6.27-7-generic
quiet

title		Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode)
uuid		432c1620-42bb-492e-ac24-417bca179434
kernel		/boot/vmlinuz-2.6.27-7-generic root=UUID=432c1620-42bb-492e-ac24-417bca179434 ro  single
initrd		/boot/initrd.img-2.6.27-7-generic

title		Ubuntu 8.10, memtest86+
uuid		432c1620-42bb-492e-ac24-417bca179434
kernel		/boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

=============================== sda1/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# /dev/sda1
UUID=432c1620-42bb-492e-ac24-417bca179434 /               ext3    relatime,errors=remount-ro 0       1
# /dev/sda5
UUID=393e15cc-9896-413a-8707-30ceecff3341 none            swap    sw              0       0
/dev/scd0       /media/cdrom0   udf,iso9660 user,noauto,exec,utf8 0       0

=================== sda1: Location of files loaded by Grub: ===================


    .0GB: boot/grub/menu.lst
    .0GB: boot/grub/stage2
    .0GB: boot/initrd.img-2.6.27-7-generic
    .0GB: boot/vmlinuz-2.6.27-7-generic
    .0GB: initrd.img
    .0GB: vmlinuz

=========================== sda6/boot/grub/grub.cfg: ===========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
  have_grubenv=true
  load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
  saved_entry=${prev_saved_entry}
  save_env saved_entry
  prev_saved_entry=
  save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set ffd9211b-6021-4f90-9428-18ba6625c507
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=640x480
  insmod gfxterm
  insmod vbe
  if terminal_output gfxterm ; then true ; else
    # For backward compatibility with versions of terminal.mod that don't
    # understand terminal_output
    terminal gfxterm
  fi
fi
if [ ${recordfail} = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	set quiet=1
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set ffd9211b-6021-4f90-9428-18ba6625c507
	linux	/boot/vmlinuz-2.6.31-14-generic root=UUID=ffd9211b-6021-4f90-9428-18ba6625c507 ro   quiet splash
	initrd	/boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set ffd9211b-6021-4f90-9428-18ba6625c507
	linux	/boot/vmlinuz-2.6.31-14-generic root=UUID=ffd9211b-6021-4f90-9428-18ba6625c507 ro single 
	initrd	/boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	linux16	/boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Ubuntu 8.10, kernel 2.6.27-7-generic (on /dev/sda1)" {
	insmod ext2
	set root=(hd0,1)
	search --no-floppy --fs-uuid --set 432c1620-42bb-492e-ac24-417bca179434
	linux /boot/vmlinuz-2.6.27-7-generic root=UUID=432c1620-42bb-492e-ac24-417bca179434 ro quiet splash
	initrd /boot/initrd.img-2.6.27-7-generic
}
menuentry "Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode) (on /dev/sda1)" {
	insmod ext2
	set root=(hd0,1)
	search --no-floppy --fs-uuid --set 432c1620-42bb-492e-ac24-417bca179434
	linux /boot/vmlinuz-2.6.27-7-generic root=UUID=432c1620-42bb-492e-ac24-417bca179434 ro single
	initrd /boot/initrd.img-2.6.27-7-generic
}
menuentry "Ubuntu 8.10, memtest86+ (on /dev/sda1)" {
	insmod ext2
	set root=(hd0,1)
	search --no-floppy --fs-uuid --set 432c1620-42bb-492e-ac24-417bca179434
	linux /boot/memtest86+.bin 
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

=============================== sda6/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# / was on /dev/sda6 during installation
UUID=ffd9211b-6021-4f90-9428-18ba6625c507 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda7 during installation
UUID=067429a5-6ba2-49fb-a718-60b023b12d26 none            swap    sw              0       0
/dev/scd0       /media/cdrom0   udf,iso9660 user,noauto,exec,utf8 0       0

=================== sda6: Location of files loaded by Grub: ===================


  78.9GB: boot/grub/core.img
  78.9GB: boot/grub/grub.cfg
  78.9GB: boot/initrd.img-2.6.31-14-generic
  78.9GB: boot/vmlinuz-2.6.31-14-generic
  78.9GB: initrd.img
  78.9GB: vmlinuz

=========================== sdb1/boot/grub/menu.lst: ===========================

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default		0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout		3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title		Windows 95/98/NT/2000
# root		(hd0,0)
# makeactive
# chainloader	+1
#
# title		Linux
# root		(hd0,1)
# kernel	/vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=0db81fe1-984b-4429-b202-b17a3f8c35c0

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title		Ubuntu 9.04, kernel 2.6.28-17-generic
uuid		0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel		/boot/vmlinuz-2.6.28-17-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro quiet splash 
initrd		/boot/initrd.img-2.6.28-17-generic
quiet

title		Ubuntu 9.04, kernel 2.6.28-17-generic (recovery mode)
uuid		0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel		/boot/vmlinuz-2.6.28-17-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro  single
initrd		/boot/initrd.img-2.6.28-17-generic

title		Ubuntu 9.04, kernel 2.6.28-16-generic
uuid		0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel		/boot/vmlinuz-2.6.28-16-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro quiet splash 
initrd		/boot/initrd.img-2.6.28-16-generic
quiet

title		Ubuntu 9.04, kernel 2.6.28-16-generic (recovery mode)
uuid		0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel		/boot/vmlinuz-2.6.28-16-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro  single
initrd		/boot/initrd.img-2.6.28-16-generic

title		Ubuntu 9.04, kernel 2.6.28-15-generic
uuid		0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel		/boot/vmlinuz-2.6.28-15-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro quiet splash 
initrd		/boot/initrd.img-2.6.28-15-generic
quiet

title		Ubuntu 9.04, kernel 2.6.28-15-generic (recovery mode)
uuid		0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel		/boot/vmlinuz-2.6.28-15-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro  single
initrd		/boot/initrd.img-2.6.28-15-generic

title		Ubuntu 9.04, kernel 2.6.28-14-generic
uuid		0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel		/boot/vmlinuz-2.6.28-14-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro quiet splash 
initrd		/boot/initrd.img-2.6.28-14-generic
quiet

title		Ubuntu 9.04, kernel 2.6.28-14-generic (recovery mode)
uuid		0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel		/boot/vmlinuz-2.6.28-14-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro  single
initrd		/boot/initrd.img-2.6.28-14-generic

title		Ubuntu 9.04, kernel 2.6.28-13-generic
uuid		0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel		/boot/vmlinuz-2.6.28-13-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro quiet splash 
initrd		/boot/initrd.img-2.6.28-13-generic
quiet

title		Ubuntu 9.04, kernel 2.6.28-13-generic (recovery mode)
uuid		0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel		/boot/vmlinuz-2.6.28-13-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro  single
initrd		/boot/initrd.img-2.6.28-13-generic

title		Ubuntu 9.04, kernel 2.6.28-11-generic
uuid		0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel		/boot/vmlinuz-2.6.28-11-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro quiet splash 
initrd		/boot/initrd.img-2.6.28-11-generic
quiet

title		Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
uuid		0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel		/boot/vmlinuz-2.6.28-11-generic root=UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 ro  single
initrd		/boot/initrd.img-2.6.28-11-generic

title		Ubuntu 9.04, memtest86+
uuid		0db81fe1-984b-4429-b202-b17a3f8c35c0
kernel		/boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

=============================== sdb1/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# / was on /dev/sda1 during installation
UUID=0db81fe1-984b-4429-b202-b17a3f8c35c0 /               ext3    relatime,errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=72af050b-5dd4-47c1-932b-4b4b03b2a29a none            swap    sw              0       0
/dev/scd0       /media/cdrom0   udf,iso9660 user,noauto,exec,utf8 0       0

=================== sdb1: Location of files loaded by Grub: ===================


    .0GB: boot/grub/menu.lst
    .0GB: boot/grub/stage2
    .0GB: boot/initrd.img-2.6.28-11-generic
    .0GB: boot/initrd.img-2.6.28-13-generic
    .0GB: boot/initrd.img-2.6.28-14-generic
    .0GB: boot/initrd.img-2.6.28-15-generic
    .0GB: boot/initrd.img-2.6.28-16-generic
    .0GB: boot/initrd.img-2.6.28-17-generic
    .0GB: boot/vmlinuz-2.6.28-11-generic
    .0GB: boot/vmlinuz-2.6.28-13-generic
    .0GB: boot/vmlinuz-2.6.28-14-generic
    .0GB: boot/vmlinuz-2.6.28-15-generic
    .0GB: boot/vmlinuz-2.6.28-16-generic
    .0GB: boot/vmlinuz-2.6.28-17-generic
    .0GB: initrd.img
    .0GB: initrd.img.old
    .0GB: vmlinuz
    .0GB: vmlinuz.old

Dernière modification par superwanus (Le 25/01/2010, à 15:17)

Hors ligne

#4 Le 25/01/2010, à 11:28

Qid

Re : [HOW TO] bootinfoscript

wahou ... ça semble surpuissant comme truc !
@ superwanus > **headshot** mad:mad::mad::mad::mad::mad::mad:


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#5 Le 25/01/2010, à 11:49

malbo

Re : [HOW TO] bootinfoscript

Il y a peut-être des vices cachés dans ce script mais c'est vrai qu'au lieu de tartiner pendant des posts et des posts dans une discussion fatiguante, aussi bien pour nous qui voulons apporter de l'aide que pour le novice (fais-ceci, tape ça, essaie cette commande...).
Là au moins,  on lance une belle fusée éclairante sur le champ de bataille...

Hors ligne

#6 Le 25/01/2010, à 11:56

Qid

Re : [HOW TO] bootinfoscript

malbo a écrit :

on lance une belle fusée éclairante sur le champ de bataille...

trop d'info tue l'info quand meme hmm surtout quand on est face
à des C****ds qui savent pas utiliser les balises du forum ...

bon par contre avec tes histoires de vis caché tu fais peur un peu toi

hey les gens ? vous croyez que sur mac il passe ce script ?


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#7 Le 25/01/2010, à 12:19

malbo

Re : [HOW TO] bootinfoscript

Quand j'écris qu'il y a peut-être des vices cachées, ce n'est pas pour te faire peur, c'est seulement que je découvre moi aussi se machin et, comme je suis craintif de nature, je me dis que c'est un peu" trop beau pour être vrai" parce qu'on a vraiment l'impression d'avoir tous les éléments en main avec le résultat du script.

Hors ligne

#8 Le 25/01/2010, à 12:25

Qid

Re : [HOW TO] bootinfoscript

malbo a écrit :

on a vraiment l'impression d'avoir tous les éléments en main avec le résultat du script.

moi j'aurais bien aimé en plus un remix de dmidecode et des differant ls (usb/pci/mod)
mais bon c'est vrais que la c'est deja pas mal
quant à ta crainte ... bouarf ...
m'est avis que si il est effectivement utilisé par les anglais
c'est qu'il est suffisemment de confiance non ?


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#9 Le 25/01/2010, à 12:28

peterp@n

Re : [HOW TO] bootinfoscript

Oua, ça à l'air bien puissant ce script.
Et je rejoins Qid sur 2 points :
1 > superwanus > utilises les balises code, t'imagines si tout le monde fait comme toi mad

2 > Trop d'infos peut tuer l'info. Il faudrait pouvoir choisir les infos à afficher en fonction du problème qu'on rencontre.

Je vais essayer ça en tout cas.


Ubuntu 14.04 64bits, Raspbian “wheezy”, Tango Studio sauce debian
Assistance - Développement - Formations FreeCAD (logiciel 3d)

Hors ligne

#10 Le 25/01/2010, à 15:21

superwanus

Re : [HOW TO] bootinfoscript

"quand on est face
à des C****ds qui savent pas utiliser les balises du forum ..."

bin ça y est, c'est fait... merci  pour l'aide à un débutant qui  ne savait effectivement pas, il y a une heure, utiliser les balises. Je sais pas si le mieux, pour aider un débutant, c'est de commencer par les insultes (même légèrement déguisées).

Hors ligne

#11 Le 25/01/2010, à 15:38

malbo

Re : [HOW TO] bootinfoscript

Qid,
Au cachot. Tu pourras ressortir pour le goûter si tu es bien gentil.

Hors ligne

#12 Le 25/01/2010, à 15:41

Qid

Re : [HOW TO] bootinfoscript

superwanus a écrit :

"quand on est face
à des C****ds qui savent pas utiliser les balises du forum ..."

bin ça y est, c'est fait... merci  pour l'aide à un débutant qui  ne savait effectivement pas, il y a une heure, utiliser les balises. Je sais pas si le mieux, pour aider un débutant, c'est de commencer par les insultes (même légèrement déguisées).

c'est ce qui s'appel avoir pris pour tout le monde : t'es malheueusement loin d'etre le seul
et en faite maintenant que tu le dis c'est ptetre meme pas de ta faute :
si tu utilise la réponse rapide les balise n'y sont pas proposé : c'est balot sad
mais bon avoue que c'est quand meme moi l'enfin comme ça wink

@ malbo > et si je veux pas lol tongue


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#13 Le 25/01/2010, à 15:45

RegisBurin

Re : [HOW TO] bootinfoscript

@superwanus: Ne te braque pas, Quid est toujours comme ça... Il ne sait pas répondre à un néophyte sans lui dire qu'il est naze.

Mais bon, Quid sait, Quid n'a jamais été un noob, Quid n'a jamais eu besoin d'aide... en fait, je crois que Quid est le pseudo-forum.ubuntu-fr de Chuck Norris...

dsl tous pour le HS

Dernière modification par RegisBurin (Le 25/01/2010, à 15:47)


Config (M-AUDIO Delta44/Wacom CTH661-Phone ZTE OpenC-FFOS2.1) | BabyBox[WIP]
Moi sur le web / Moi, IRL mais sur le web / Ma maison sur le web

Hors ligne

#14 Le 25/01/2010, à 15:56

Qid

Re : [HOW TO] bootinfoscript

RegisBourin a écrit :

Mais bon, Quid sait, Quid n'a jamais été un noob, Quid n'a jamais eu besoin d'aide... en fait, je crois que Quid est le pseudo-forum.ubuntu-fr de Chuck Norris...

si tu savais ... big_smile ... meme qu'a l'époque
je m'etait fait inciendié par les fedoraïstes
parce que je posais trop de question


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#15 Le 25/01/2010, à 15:56

superwanus

Re : [HOW TO] bootinfoscript

je me braque pas,  c'est que je suis légèrement énervé pas mon pc... mad:mad::mad::mad:
mais  je ne désespère pas!:/

Hors ligne

#16 Le 26/01/2010, à 16:20

Qid

Re : [HOW TO] bootinfoscript

eh les gens ?
j'ia un gag à vous soumettre apres l'essai du script :

=> Windows is installed in the MBR of /dev/sda
=> Windows is installed in the MBR of /dev/sdb

[...]

Drive: sda ___________________ _____________________________________________________

Disque /dev/sda: 120.0 Go, 120034123776 octets
255 têtes, 63 secteurs/piste, 14593 cylindres, total 234441648 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Identifiant de disque : 0x3a87195b

Partition  Boot         Start           End          Size  Id System

/dev/sda1               2,048     3,074,047     3,072,000  27 Hidden HPFS/NTFS
/dev/sda2    *      3,074,048   119,810,047   116,736,000   7 HPFS/NTFS
/dev/sda3         119,810,048   234,438,655   114,628,608   7 HPFS/NTFS


Drive: sdb ___________________ _____________________________________________________

Disque /dev/sdb: 82.0 Go, 81964302336 octets
255 têtes, 63 secteurs/piste, 9964 cylindres, total 160086528 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Identifiant de disque : 0xf791f791

Partition  Boot         Start           End          Size  Id System

/dev/sdb1    *             63   156,248,189   156,248,127  83 Linux
/dev/sdb2         156,248,190   160,071,659     3,823,470  82 Linux swap / Solaris

bon alors moi je veux bien ... mais ou il a peché que le MBR de sdb etait du windows ?
bon j'avoue c'est un disque dur que j'ai piqué d'une encienne tour sous windows
mais comment ça se fait que le MBR de windows est toujours en vie
et ça suppose quoi exactement ? (j'ai aucun souci à déclarer)


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#17 Le 26/01/2010, à 17:08

malbo

Re : [HOW TO] bootinfoscript

hé Qid,
Regarde un peu ce que j'ai mis en bas du post #1 de ce fil (Attention, etc..) parce que je n'ai pas envie que tout le monde vienne coller son résultat dans ce fil. Tu vas me dire que tu n'es pas tout le monde... mais si tu acceptais de créer une nouvelle discussion sur ton cas personnel, ce serait gentil (c'est vrai que tu n'es pas gentil non plus).

Hors ligne

#18 Le 26/01/2010, à 17:16

Qid

Re : [HOW TO] bootinfoscript

malbo a écrit :

hé Qid,
Regarde un peu ce que j'ai mis en bas du post #1 de ce fil (Attention, etc..) parce que je n'ai pas envie que tout le monde vienne coller son résultat dans ce fil.

je comprends bien mais je comptais pas faire tout un debat de mon cas en faite :
ça m'a juste interpelé mais je vois pas l'utilité de créer un fils pour autant wink
en plus je trouve pas que mon affaire soit réellement hors sujet :
tu présente le script et moi je cherche à le comprendre wink
enfin bon ok si t'a (ou ne veux) pas de réponse à me donner je t'en voudrais pas wink


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#19 Le 26/01/2010, à 17:26

malbo

Re : [HOW TO] bootinfoscript

Qid,
Tu me fais peur là : ce ton modéré, cette douceur, ça ne me dit rien de bon...

Hors ligne

#20 Le 16/02/2010, à 11:28

malbo

Re : [HOW TO] bootinfoscript

Le même PC ACER que plus haut (post #2) mais pour pouvoir accéder direct à Win 7 qui est sur sda2, j'ai mis le flag sur sda2 (au lieu de sda1), réparé le boot de Win7 pour qu'il installe bootmgr sur sda2, puis réinstallé grub dans le MBR de sda (update-grub non fonctionnel depuis le live CD pour la reconnaissance des partitions windows), depuis Ubuntu démarré sur sda6, fais update-grub pour reconnaissance complète. 

                Boot Info Script 0.55    dated February 15th, 2010                    

============================= Boot Info Summary: ==============================

 => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in 
    partition #6 for /boot/grub.
 => Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in 
    partition #5 for /boot/grub.

sda1: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows XP
    Boot files/dirs:   /boot.ini /ntldr /NTDETECT.COM /wubildr.mbr /wubildr

sda2: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows Vista/7
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 7
    Boot files/dirs:   /bootmgr /Boot/BCD /Windows/System32/winload.exe

sda3: _________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info:  

sda5: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows XP
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files/dirs:   

sda6: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:  
    Operating System:  Ubuntu 9.10
    Boot files/dirs:   /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sda7: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info:  

sda8: _________________________________________________________________________

    File system:       ext3
    Boot sector type:  -
    Boot sector info:  
    Operating System:  
    Boot files/dirs:   

sda4: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  Grub
    Boot sector info:  Grub 0.97 is installed in the boot sector of sda4 and 
                       looks at sector 863321864 of the same hard drive for 
                       the stage2 file. A stage2 file is at this location on 
                       /dev/sda. Stage2 looks on partition #4 for 
                       /boot/grub/menu.lst.
    Operating System:  Mandriva Linux release 2010.0 
                       (Official) for x86_64 Kernel 2.6.31.6-desktop-1mnb on 
                       a 4-processor x86_64 /
    Boot files/dirs:   /boot/grub/menu.lst /etc/fstab

sdb1: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows XP
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows Vista
    Boot files/dirs:   /bootmgr /Boot/BCD /Windows/System32/winload.exe 
                       /wubildr.mbr /wubildr

sdb2: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows XP
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows XP
    Boot files/dirs:   /boot.ini /ntldr /NTDETECT.COM

sdb3: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info:  

sdb4: _________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info:  

sdb5: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:  
    Operating System:  Ubuntu 9.10
    Boot files/dirs:   /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sdb6: _________________________________________________________________________

    File system:       ext3
    Boot sector type:  -
    Boot sector info:  
    Operating System:  
    Boot files/dirs:   

sdb7: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows XP
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files/dirs:   

sdb8: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows XP
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files/dirs:   /ubuntu/winboot/wubildr.mbr /ubuntu/winboot/wubildr 
                       /ubuntu/disks/root.disk /ubuntu/disks/swap.disk

sdb8/Wubi: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:  
    Operating System:  Ubuntu 9.10
    Boot files/dirs:   /boot/grub/grub.cfg /etc/fstab

sdb9: _________________________________________________________________________

    File system:       ntfs
    Boot sector type:  Windows XP
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 7
    Boot files/dirs:   /Windows/System32/winload.exe

=========================== Drive/Partition Info: =============================

Drive: sda ___________________ _____________________________________________________

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x00037dc9

Partition  Boot         Start           End          Size  Id System

/dev/sda1              32,130    62,541,044    62,508,915   7 HPFS/NTFS
/dev/sda2    *     62,541,045   205,166,114   142,625,070   7 HPFS/NTFS
/dev/sda3         205,166,115   855,557,639   650,391,525   5 Extended
/dev/sda5         205,166,178   720,595,574   515,429,397   7 HPFS/NTFS
/dev/sda6         720,595,638   741,094,514    20,498,877  83 Linux
/dev/sda7         741,094,578   751,456,439    10,361,862  82 Linux swap / Solaris
/dev/sda8         751,456,503   855,557,639   104,101,137  83 Linux
/dev/sda4         855,557,640   976,768,064   121,210,425  83 Linux


Drive: sdb ___________________ _____________________________________________________

Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xa9e4f6a8

Partition  Boot         Start           End          Size  Id System

/dev/sdb1    *             63    63,215,774    63,215,712   7 HPFS/NTFS
/dev/sdb2          63,215,775    83,698,649    20,482,875   7 HPFS/NTFS
/dev/sdb3          83,698,650    95,988,374    12,289,725  82 Linux swap / Solaris
/dev/sdb4          95,988,375 1,953,520,064 1,857,531,690   5 Extended
/dev/sdb5          95,988,438   126,704,654    30,716,217  83 Linux
/dev/sdb6         126,704,718   249,585,839   122,881,122  83 Linux
/dev/sdb7         249,585,903   270,550,664    20,964,762   7 HPFS/NTFS
/dev/sdb8         270,550,728 1,870,029,247 1,599,478,520   7 HPFS/NTFS
/dev/sdb9       1,870,030,323 1,953,520,064    83,489,742   7 HPFS/NTFS


blkid -c /dev/null: ____________________________________________________________

Device           UUID                                   TYPE       LABEL                         

/dev/loop0                                              squashfs                                 
/dev/loop1       764b3c1b-970e-44b8-b4c5-281399488294   ext4                                     
/dev/sda1        5AF42CCBF42CAB69                       ntfs       XP_PRO                        
/dev/sda2        5B1A1BA60DEDD299                       ntfs       seven sur hitachi             
/dev/sda4        c0dce78e-d94d-4fbc-90fd-7b5046297be0   ext4       mandriva                      
/dev/sda5        128CBF065FE0D822                       ntfs       DATA_XP                       
/dev/sda6        97c19c6f-3fc8-4d00-a67d-111915059b4c   ext4                                     
/dev/sda7        9e81fbe1-7d4e-2d93-4344-80a93a548991   swap                                     
/dev/sda8        89346a36-0511-4685-9c5e-46ae59401e1a   ext3                                     
/dev/sdb1        66E4D82BE4D7FB6F                       ntfs       VISTA                         
/dev/sdb2        6EB097EFB097BC51                       ntfs       XP LEGER                      
/dev/sdb3        852820a7-1551-4cff-9aeb-a843085b7815   swap                                     
/dev/sdb5        c27e7454-6747-448a-9a7b-97352f4c1676   ext4                                     
/dev/sdb6        1952eb9c-ef8f-4585-b65f-43a8822b8daa   ext3                                     
/dev/sdb7        417516424CE2345F                       ntfs                                     
/dev/sdb8        6EFDDDA001845237                       ntfs       StockageNTFS                  
/dev/sdb9        38852FB86E150005                       ntfs       seven                         

============================ "mount | grep ^/dev  output: ===========================

Device           Mount_Point              Type       Options

aufs             /                        aufs       (rw)
/dev/sr0         /cdrom                   iso9660    (rw)
/dev/loop0       /rofs                    squashfs   (rw)


================================ sda1/boot.ini: ================================

[boot loader]

timeout=7

default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS

[operating systems]

multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professionnel" /NOEXECUTE=OPTIN /FASTDETECT

multi(0)disk(0)rdisk(1)partition(2)\WINDOWS="XP LEGER" /noexecute=optin /fastdetect

c:\CMDCONS\BOOTSECT.DAT="Console de r‚cup‚ration Microsoft Windows XP" /CMDCONS

C:\wubildr.mbr = "Ubuntu"


=========================== sda6/boot/grub/grub.cfg: ===========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
  have_grubenv=true
  load_env
fi
set default="6"
if [ ${prev_saved_entry} ]; then
  saved_entry=${prev_saved_entry}
  save_env saved_entry
  prev_saved_entry=
  save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=640x480
  insmod gfxterm
  insmod vbe
  if terminal_output gfxterm ; then true ; else
    # For backward compatibility with versions of terminal.mod that don't
    # understand terminal_output
    terminal gfxterm
  fi
fi
if [ ${recordfail} = 1 ]; then
  set timeout=-1
else
  set timeout=3
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-19-generic" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	set quiet=1
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux	/boot/vmlinuz-2.6.31-19-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro   quiet splash
	initrd	/boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-19-generic (recovery mode)" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux	/boot/vmlinuz-2.6.31-19-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single 
	initrd	/boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	set quiet=1
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux	/boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro   quiet splash
	initrd	/boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode)" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux	/boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single 
	initrd	/boot/initrd.img-2.6.31-17-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	linux16	/boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows NT/2000/XP (loader) (on /dev/sda1)" {
	insmod ntfs
	set root=(hd0,1)
	search --no-floppy --fs-uuid --set 5af42ccbf42cab69
	drivemap -s (hd0) ${root}
	chainloader +1
}
menuentry "Windows 7 (loader) (on /dev/sda2)" {
	insmod ntfs
	set root=(hd0,2)
	search --no-floppy --fs-uuid --set 5b1a1ba60dedd299
	chainloader +1
}
menuentry "linux (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
	linux /boot/vmlinuz BOOT_IMAGE=linux root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
	initrd (hd0,3)/boot/initrd.img
}
menuentry "linux-nonfb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
	linux /boot/vmlinuz BOOT_IMAGE=linux-nonfb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0
	initrd (hd0,3)/boot/initrd.img
}
menuentry "failsafe (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
	linux /boot/vmlinuz BOOT_IMAGE=failsafe root=LABEL=mandriva failsafe
	initrd (hd0,3)/boot/initrd.img
}
menuentry "desktop 2.6.31.5-1mnb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
	linux /boot/vmlinuz-2.6.31.5-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.5-1mnb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
	initrd (hd0,3)/boot/initrd-2.6.31.5-desktop-1mnb.img
}
menuentry "desktop 2.6.31.6-1mnb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
	linux /boot/vmlinuz-2.6.31.6-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.6-1mnb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
	initrd (hd0,3)/boot/initrd-2.6.31.6-desktop-1mnb.img
}
menuentry "Windows 7 (loader) (on /dev/sdb1)" {
	insmod ntfs
	set root=(hd1,1)
	search --no-floppy --fs-uuid --set 66e4d82be4d7fb6f
	chainloader +1
}
menuentry "Windows NT/2000/XP (loader) (on /dev/sdb2)" {
	insmod ntfs
	set root=(hd1,2)
	search --no-floppy --fs-uuid --set 6eb097efb097bc51
	drivemap -s (hd0) ${root}
	chainloader +1
}
menuentry "Ubuntu, Linux 2.6.31-19-generic (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-19-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
	initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-19-generic (recovery mode) (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-19-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
	initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-17-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
	initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode) (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-17-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
	initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
	initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode) (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
	initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
	initrd /boot/initrd.img-2.6.31-15-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (recovery mode) (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
	initrd /boot/initrd.img-2.6.31-15-generic
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.

menuentry "mandriva par chainload vers sda4" {
    insmod ext2
    set root=(hd0,4)
    chainloader +1
}

### END /etc/grub.d/40_custom ###

=============================== sda6/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
#  -- This file has been automaticly generated by ntfs-config -- 
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>

proc /proc proc defaults 0 0
# Entry for /dev/sda6 :
UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c / ext4 errors=remount-ro 0 1
# Entry for /dev/sda7 :
UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 none swap sw 0 0
# Entry for /dev/sdb3 :
UUID=852820a7-1551-4cff-9aeb-a843085b7815 none swap sw 0 0
/dev/sdb9 /media/seven ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb1 /media/VISTA ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb2 /media/XP\040LEGER ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb8 /media/StockageNTFS ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda5 /media/DATA_XP ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda2 /media/seven\040sur\040hitachi ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda1 /media/XP_PRO ntfs-3g defaults,locale=fr_FR.UTF-8 0 0

=================== sda6: Location of files loaded by Grub: ===================


 372.1GB: boot/grub/core.img
 374.8GB: boot/grub/grub.cfg
 372.8GB: boot/initrd.img-2.6.31-17-generic
 374.5GB: boot/initrd.img-2.6.31-19-generic
 372.6GB: boot/vmlinuz-2.6.31-17-generic
 373.9GB: boot/vmlinuz-2.6.31-19-generic
 374.5GB: initrd.img
 372.8GB: initrd.img.old
 373.9GB: vmlinuz
 372.6GB: vmlinuz.old

=========================== sda4/boot/grub/menu.lst: ===========================

timeout 10
color black/cyan yellow/cyan
gfxmenu (hd0,3)/boot/gfxmenu
default 0

title linux
kernel (hd0,3)/boot/vmlinuz BOOT_IMAGE=linux root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
initrd (hd0,3)/boot/initrd.img

title linux-nonfb
kernel (hd0,3)/boot/vmlinuz BOOT_IMAGE=linux-nonfb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0
initrd (hd0,3)/boot/initrd.img

title failsafe
kernel (hd0,3)/boot/vmlinuz BOOT_IMAGE=failsafe root=LABEL=mandriva failsafe
initrd (hd0,3)/boot/initrd.img

title windows
root (hd0,0)
makeactive
chainloader +1

title windows1
root (hd1,0)
map (0x81) (0x80)
map (0x80) (0x81)
makeactive
chainloader +1

title desktop 2.6.31.5-1mnb
kernel (hd0,3)/boot/vmlinuz-2.6.31.5-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.5-1mnb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.31.5-desktop-1mnb.img

title desktop 2.6.31.6-1mnb
kernel (hd0,3)/boot/vmlinuz-2.6.31.6-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.6-1mnb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
initrd (hd0,3)/boot/initrd-2.6.31.6-desktop-1mnb.img

=============================== sda4/etc/fstab: ===============================

# Entry for /dev/sda4 :
LABEL=mandriva / ext4 relatime 1 1
/dev/cdrom /media/cdrom auto umask=0,users,iocharset=utf8,noauto,ro,exec 0 0
# Entry for /dev/sda1 :
UUID=5AF42CCBF42CAB69 /media/win_c ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sdb1 :
UUID=66E4D82BE4D7FB6F /media/win_c2 ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sda5 :
UUID=128CBF065FE0D822 /media/win_d ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sdb7 :
UUID=417516424CE2345F /media/win_d2 ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sda2 :
UUID=5B1A1BA60DEDD299 /media/win_e ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sdb8 :
UUID=6EFDDDA001845237 /media/win_e2 ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sdb9 :
UUID=38852FB86E150005 /media/win_f ntfs-3g defaults,umask=000 0 0
# Entry for /dev/sdb2 :
UUID=6EB097EFB097BC51 /media/win_g ntfs-3g defaults,umask=000 0 0
none /proc proc defaults 0 0
# Entry for /dev/sda7 :
UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 swap swap defaults 0 0
# Entry for /dev/sdb3 :
UUID=852820a7-1551-4cff-9aeb-a843085b7815 swap swap defaults 0 0

=================== sda4: Location of files loaded by Grub: ===================


 438.4GB: boot/grub/menu.lst
 442.0GB: boot/grub/stage2
 442.1GB: boot/initrd-2.6.31.5-desktop-1mnb.img
 444.0GB: boot/initrd-2.6.31.6-desktop-1mnb.img
 444.0GB: boot/initrd-desktop.img
 444.0GB: boot/initrd.img
 443.2GB: boot/vmlinuz
 440.5GB: boot/vmlinuz-2.6.31.5-desktop-1mnb
 443.2GB: boot/vmlinuz-2.6.31.6-desktop-1mnb
 443.2GB: boot/vmlinuz-desktop

================================ sdb2/boot.ini: ================================

[boot loader]

timeout=10

default=multi(0)disk(0)rdisk(1)partition(1)\WINDOWS

[operating systems]

multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="Microsoft Windows XP Professionnel" /NOEXECUTE=OPTIN /FASTDETECT

multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="XP LEGER" /noexecute=optin /fastdetect

c:\CMDCONS\BOOTSECT.DAT="Console de r‚cup‚ration Microsoft Windows XP" /CMDCONS

C:\wubildr.mbr = "Ubuntu"


=========================== sdb5/boot/grub/grub.cfg: ===========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
  have_grubenv=true
  load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
  saved_entry=${prev_saved_entry}
  save_env saved_entry
  prev_saved_entry=
  save_env prev_saved_entry
fi
insmod ext2
set root=(hd1,5)
search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=640x480
  insmod gfxterm
  insmod vbe
  if terminal_output gfxterm ; then true ; else
    # For backward compatibility with versions of terminal.mod that don't
    # understand terminal_output
    terminal gfxterm
  fi
fi
if [ ${recordfail} = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-19-generic" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	set quiet=1
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux	/boot/vmlinuz-2.6.31-19-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro   quiet splash
	initrd	/boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-19-generic (recovery mode)" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux	/boot/vmlinuz-2.6.31-19-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single 
	initrd	/boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	set quiet=1
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux	/boot/vmlinuz-2.6.31-17-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro   quiet splash
	initrd	/boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode)" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux	/boot/vmlinuz-2.6.31-17-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single 
	initrd	/boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	set quiet=1
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux	/boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro   quiet splash
	initrd	/boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode)" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux	/boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single 
	initrd	/boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	set quiet=1
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux	/boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro   quiet splash
	initrd	/boot/initrd.img-2.6.31-15-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (recovery mode)" {
        recordfail=1
        if [ -n ${have_grubenv} ]; then save_env recordfail; fi
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux	/boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single 
	initrd	/boot/initrd.img-2.6.31-15-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	linux16	/boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows NT/2000/XP (loader) (on /dev/sda1)" {
	insmod ntfs
	set root=(hd0,1)
	search --no-floppy --fs-uuid --set 5af42ccbf42cab69
	drivemap -s (hd0) ${root}
	chainloader +1
}
menuentry "linux (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
	linux /boot/vmlinuz BOOT_IMAGE=linux root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
	initrd (hd0,3)/boot/initrd.img
}
menuentry "linux-nonfb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
	linux /boot/vmlinuz BOOT_IMAGE=linux-nonfb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0
	initrd (hd0,3)/boot/initrd.img
}
menuentry "failsafe (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
	linux /boot/vmlinuz BOOT_IMAGE=failsafe root=LABEL=mandriva failsafe
	initrd (hd0,3)/boot/initrd.img
}
menuentry "desktop 2.6.31.5-1mnb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
	linux /boot/vmlinuz-2.6.31.5-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.5-1mnb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
	initrd (hd0,3)/boot/initrd-2.6.31.5-desktop-1mnb.img
}
menuentry "desktop 2.6.31.6-1mnb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
	linux /boot/vmlinuz-2.6.31.6-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.6-1mnb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
	initrd (hd0,3)/boot/initrd-2.6.31.6-desktop-1mnb.img
}
menuentry "Ubuntu, Linux 2.6.31-19-generic (on /dev/sda6)" {
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux /boot/vmlinuz-2.6.31-19-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro quiet splash
	initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-19-generic (recovery mode) (on /dev/sda6)" {
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux /boot/vmlinuz-2.6.31-19-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single
	initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (on /dev/sda6)" {
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux /boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro quiet splash
	initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode) (on /dev/sda6)" {
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux /boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single
	initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Windows 7 (loader) (on /dev/sdb1)" {
	insmod ntfs
	set root=(hd1,1)
	search --no-floppy --fs-uuid --set 66e4d82be4d7fb6f
	chainloader +1
}
menuentry "Windows NT/2000/XP (loader) (on /dev/sdb2)" {
	insmod ntfs
	set root=(hd1,2)
	search --no-floppy --fs-uuid --set 6eb097efb097bc51
	drivemap -s (hd0) ${root}
	chainloader +1
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

=============================== sdb5/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
#  -- This file has been automaticly generated by ntfs-config -- 
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>

proc /proc proc defaults 0 0
# Entry for /dev/sdb5 :
UUID=c27e7454-6747-448a-9a7b-97352f4c1676 / ext4 errors=remount-ro 0 1
# Entry for /dev/sda7 :
UUID=9e81fbe1-7d4e-2d93-4344-80a93a548991 none swap sw 0 0
# Entry for /dev/sdb3 :
UUID=852820a7-1551-4cff-9aeb-a843085b7815 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/sdb8 /media/StockageNTFS ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb9 /media/seven ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb1 /media/ACER ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb2 /media/XP\040LEGER ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda5 /media/DATA_XP ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda2 /media/seven\040sur\040hitachi ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda1 /media/XP_PRO ntfs-3g defaults,locale=fr_FR.UTF-8 0 0

=================== sdb5: Location of files loaded by Grub: ===================


  53.4GB: boot/grub/core.img
  54.1GB: boot/grub/grub.cfg
  52.3GB: boot/initrd.img-2.6.31-15-generic
  53.3GB: boot/initrd.img-2.6.31-16-generic
  53.8GB: boot/initrd.img-2.6.31-17-generic
  54.1GB: boot/initrd.img-2.6.31-19-generic
  51.6GB: boot/vmlinuz-2.6.31-15-generic
  52.4GB: boot/vmlinuz-2.6.31-16-generic
  49.4GB: boot/vmlinuz-2.6.31-17-generic
  53.2GB: boot/vmlinuz-2.6.31-19-generic
  54.1GB: initrd.img
  53.8GB: initrd.img.old
  53.2GB: vmlinuz
  49.4GB: vmlinuz.old

======================== sdb8/Wubi/boot/grub/grub.cfg: ========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
  have_grubenv=true
  load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
  saved_entry=${prev_saved_entry}
  save_env saved_entry
  prev_saved_entry=
  save_env prev_saved_entry
fi
if [ ${recordfail} = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
menuentry "Ubuntu, Linux 2.6.31-19-generic" {
	insmod ntfs
	set root=(hd1,8)
	search --no-floppy --fs-uuid --set 6efddda001845237
	loopback loop0 /ubuntu/disks/root.disk
	set root=(loop0)
	linux /boot/vmlinuz-2.6.31-19-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro   quiet splash
	initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-19-generic (recovery mode)" {
	insmod ntfs
	set root=(hd1,8)
	search --no-floppy --fs-uuid --set 6efddda001845237
	loopback loop0 /ubuntu/disks/root.disk
	set root=(loop0)
	linux /boot/vmlinuz-2.6.31-19-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro single 
	initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic" {
	insmod ntfs
	set root=(hd1,8)
	search --no-floppy --fs-uuid --set 6efddda001845237
	loopback loop0 /ubuntu/disks/root.disk
	set root=(loop0)
	linux /boot/vmlinuz-2.6.31-17-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro   quiet splash
	initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode)" {
	insmod ntfs
	set root=(hd1,8)
	search --no-floppy --fs-uuid --set 6efddda001845237
	loopback loop0 /ubuntu/disks/root.disk
	set root=(loop0)
	linux /boot/vmlinuz-2.6.31-17-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro single 
	initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic" {
	insmod ntfs
	set root=(hd1,8)
	search --no-floppy --fs-uuid --set 6efddda001845237
	loopback loop0 /ubuntu/disks/root.disk
	set root=(loop0)
	linux /boot/vmlinuz-2.6.31-16-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro   quiet splash
	initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode)" {
	insmod ntfs
	set root=(hd1,8)
	search --no-floppy --fs-uuid --set 6efddda001845237
	loopback loop0 /ubuntu/disks/root.disk
	set root=(loop0)
	linux /boot/vmlinuz-2.6.31-16-generic root=/dev/sdb8 loop=/ubuntu/disks/root.disk ro single 
	initrd /boot/initrd.img-2.6.31-16-generic
}
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows NT/2000/XP (loader) (on /dev/sda1)" {
	insmod ntfs
	set root=(hd0,1)
	search --no-floppy --fs-uuid --set 5af42ccbf42cab69
	drivemap -s (hd0) ${root}
	chainloader +1
}
menuentry "linux (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
	linux /boot/vmlinuz BOOT_IMAGE=linux root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
	initrd (hd0,3)/boot/initrd.img
}
menuentry "linux-nonfb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
	linux /boot/vmlinuz BOOT_IMAGE=linux-nonfb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0
	initrd (hd0,3)/boot/initrd.img
}
menuentry "failsafe (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
	linux /boot/vmlinuz BOOT_IMAGE=failsafe root=LABEL=mandriva failsafe
	initrd (hd0,3)/boot/initrd.img
}
menuentry "desktop 2.6.31.5-1mnb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
	linux /boot/vmlinuz-2.6.31.5-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.5-1mnb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
	initrd (hd0,3)/boot/initrd-2.6.31.5-desktop-1mnb.img
}
menuentry "desktop 2.6.31.6-1mnb (on /dev/sda4)" {
	insmod ext2
	set root=(hd0,4)
	search --no-floppy --fs-uuid --set c0dce78e-d94d-4fbc-90fd-7b5046297be0
	linux /boot/vmlinuz-2.6.31.6-desktop-1mnb BOOT_IMAGE=desktop_2.6.31.6-1mnb root=LABEL=mandriva resume=UUID=c0dce78e-d94d-4fbc-90fd-7b5046297be0 splash=silent vga=788
	initrd (hd0,3)/boot/initrd-2.6.31.6-desktop-1mnb.img
}
menuentry "Ubuntu, Linux 2.6.31-19-generic (on /dev/sda6)" {
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux /boot/vmlinuz-2.6.31-19-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro quiet splash
	initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-19-generic (recovery mode) (on /dev/sda6)" {
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux /boot/vmlinuz-2.6.31-19-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single
	initrd /boot/initrd.img-2.6.31-19-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (on /dev/sda6)" {
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux /boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro quiet splash
	initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode) (on /dev/sda6)" {
	insmod ext2
	set root=(hd0,6)
	search --no-floppy --fs-uuid --set 97c19c6f-3fc8-4d00-a67d-111915059b4c
	linux /boot/vmlinuz-2.6.31-17-generic root=UUID=97c19c6f-3fc8-4d00-a67d-111915059b4c ro single
	initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Windows 7 (loader) (on /dev/sdb1)" {
	insmod ntfs
	set root=(hd1,1)
	search --no-floppy --fs-uuid --set 66e4d82be4d7fb6f
	chainloader +1
}
menuentry "Windows NT/2000/XP (loader) (on /dev/sdb2)" {
	insmod ntfs
	set root=(hd1,2)
	search --no-floppy --fs-uuid --set 6eb097efb097bc51
	drivemap -s (hd0) ${root}
	chainloader +1
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-17-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
	initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode) (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-17-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
	initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
	initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode) (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-16-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
	initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro quiet splash
	initrd /boot/initrd.img-2.6.31-15-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (recovery mode) (on /dev/sdb5)" {
	insmod ext2
	set root=(hd1,5)
	search --no-floppy --fs-uuid --set c27e7454-6747-448a-9a7b-97352f4c1676
	linux /boot/vmlinuz-2.6.31-15-generic root=UUID=c27e7454-6747-448a-9a7b-97352f4c1676 ro single
	initrd /boot/initrd.img-2.6.31-15-generic
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

============================= sdb8/Wubi/etc/fstab: =============================

# /etc/fstab: static file system information.
#
#  -- This file has been automaticly generated by ntfs-config -- 
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>

proc /proc proc defaults 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
/dev/sda5 /media/DATA_XP ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb2 /media/XP\040LEGER ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb1 /media/VISTA ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sdb9 /media/seven ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda2 /media/seven\040sur\040hitachi ntfs-3g defaults,locale=fr_FR.UTF-8 0 0
/dev/sda1 /media/XP_PRO ntfs-3g defaults,locale=fr_FR.UTF-8 0 0

================= sdb8/Wubi: Location of files loaded by Grub: =================


   4.7GB: boot/grub/grub.cfg
   4.1GB: boot/initrd.img-2.6.31-16-generic
   3.9GB: boot/initrd.img-2.6.31-17-generic
   5.0GB: boot/initrd.img-2.6.31-19-generic
   4.2GB: boot/vmlinuz-2.6.31-16-generic
   2.6GB: boot/vmlinuz-2.6.31-17-generic
   4.5GB: boot/vmlinuz-2.6.31-19-generic
   5.0GB: initrd.img
   3.9GB: initrd.img.old
   4.5GB: vmlinuz
   2.6GB: vmlinuz.old
=======Devices which don't seem to have a corresponding hard drive==============

sdc sdd sde sdf

Dernière modification par malbo (Le 16/02/2010, à 11:39)

Hors ligne

#21 Le 17/02/2010, à 02:21

Qid

Re : [HOW TO] bootinfoscript

@ malbo > tu vas te faire tapper sur les doigts toi hmm


"GNU/Linux c'est que du bon mais M$ Windows ce n'est pas si mal"
Référent technique Ubuntu d'un Groupe d'Utilisateur du Libre
plus d'info sur mon profil

Hors ligne

#22 Le 17/02/2010, à 07:06

malbo

Re : [HOW TO] bootinfoscript

Mais c'est à but pédagogique Qid.
Bon d'accord, j'abuse...

Hors ligne

#23 Le 08/06/2010, à 08:14

kalisto07

Re : [HOW TO] bootinfoscript

merci pour l'info

Hors ligne

#24 Le 19/09/2010, à 17:07

xavgd

Re : [HOW TO] bootinfoscript

Bonsoir à tous,

Désolé mais j'ai besoin d'aide ..
Comme vous le voyez ci dessous, j'ai une erreur dans ma phase de boot avec sda1/boot/grub/grub.cfg .. (enfin je pense que c'est ça .)

Quelqu'un pourrait il m'aider ??

Merci d'avance

 Boot Info Script 0.55    dated February 15th, 2010                    

============================= Boot Info Summary: ==============================

 => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in 
    partition #1 for /boot/grub.

sda1: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:  
    Operating System:  Ubuntu 10.04.1 LTS
    Boot files/dirs:   /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sda2: _________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info:  

sda5: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info:  

=========================== Drive/Partition Info: =============================

Drive: sda ___________________ _____________________________________________________

Disque /dev/sda: 80.0 Go, 80026361856 octets
255 têtes, 63 secteurs/piste, 9729 cylindres, total 156301488 secteurs
Unités = secteurs de 1 * 512 = 512 octets
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot         Start           End          Size  Id System

/dev/sda1    *          2,048   149,843,967   149,841,920  83 Linux
/dev/sda2         149,846,014   156,301,311     6,455,298   5 Extended
/dev/sda5         149,846,016   156,301,311     6,455,296  82 Linux swap / Solaris


blkid -c /dev/null: ____________________________________________________________

Device           UUID                                   TYPE       LABEL                         

/dev/sda1        c742fa8e-f79f-4582-818e-77c848450961   ext4                                     
/dev/sda2: PTTYPE="dos" 
/dev/sda5        1591fb3e-f77e-441b-879a-aae6ac3239d1   swap                                     
/dev/sda: PTTYPE="dos" 

============================ "mount | grep ^/dev  output: ===========================

Device           Mount_Point              Type       Options

/dev/sda1        /                        ext4       (rw,errors=remount-ro)


=========================== sda1/boot/grub/grub.cfg: ===========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
  set saved_entry=${prev_saved_entry}
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z ${boot_once} ]; then
    saved_entry=${chosen}
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set c742fa8e-f79f-4582-818e-77c848450961
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=640x480
  insmod gfxterm
  insmod vbe
  if terminal_output gfxterm ; then true ; else
    # For backward compatibility with versions of terminal.mod that don't
    # understand terminal_output
    terminal gfxterm
  fi
fi
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set c742fa8e-f79f-4582-818e-77c848450961
set locale_dir=($root)/boot/grub/locale
set lang=fr
insmod gettext
if [ ${recordfail} = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, avec Linux 2.6.32-25-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set c742fa8e-f79f-4582-818e-77c848450961
	linux	/boot/vmlinuz-2.6.32-25-generic root=UUID=c742fa8e-f79f-4582-818e-77c848450961 ro   quiet splash
	initrd	/boot/initrd.img-2.6.32-25-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-25-generic (mode de récupération)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set c742fa8e-f79f-4582-818e-77c848450961
	echo	'Chargement de Linux 2.6.32-25-generic ...'
	linux	/boot/vmlinuz-2.6.32-25-generic root=UUID=c742fa8e-f79f-4582-818e-77c848450961 ro single 
	echo	'Chargement du disque mémoire initial...'
	initrd	/boot/initrd.img-2.6.32-25-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set c742fa8e-f79f-4582-818e-77c848450961
	linux	/boot/vmlinuz-2.6.32-24-generic root=UUID=c742fa8e-f79f-4582-818e-77c848450961 ro   quiet splash
	initrd	/boot/initrd.img-2.6.32-24-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-24-generic (mode de récupération)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set c742fa8e-f79f-4582-818e-77c848450961
	echo	'Chargement de Linux 2.6.32-24-generic ...'
	linux	/boot/vmlinuz-2.6.32-24-generic root=UUID=c742fa8e-f79f-4582-818e-77c848450961 ro single 
	echo	'Chargement du disque mémoire initial...'
	initrd	/boot/initrd.img-2.6.32-24-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set c742fa8e-f79f-4582-818e-77c848450961
	linux	/boot/vmlinuz-2.6.32-21-generic root=UUID=c742fa8e-f79f-4582-818e-77c848450961 ro   quiet splash
	initrd	/boot/initrd.img-2.6.32-21-generic
}
menuentry 'Ubuntu, avec Linux 2.6.32-21-generic (mode de récupération)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set c742fa8e-f79f-4582-818e-77c848450961
	echo	'Chargement de Linux 2.6.32-21-generic ...'
	linux	/boot/vmlinuz-2.6.32-21-generic root=UUID=c742fa8e-f79f-4582-818e-77c848450961 ro single 
	echo	'Chargement du disque mémoire initial...'
	initrd	/boot/initrd.img-2.6.32-21-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set c742fa8e-f79f-4582-818e-77c848450961
	linux16	/boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set c742fa8e-f79f-4582-818e-77c848450961
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
  if keystatus; then
    if keystatus --shift; then
      set timeout=-1
    else
      set timeout=0
    fi
  else
    if sleep --interruptible 3 ; then
      set timeout=0
    fi
  fi
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

=============================== sda1/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
/dev/sda1       /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=1591fb3e-f77e-441b-879a-aae6ac3239d1 none            swap    sw              0       0

=================== sda1: Location of files loaded by Grub: ===================


  21.6GB: boot/grub/core.img
  58.1GB: boot/grub/grub.cfg
  21.6GB: boot/initrd.img-2.6.32-21-generic
  21.8GB: boot/initrd.img-2.6.32-24-generic
  21.8GB: boot/initrd.img-2.6.32-25-generic
    .1GB: boot/vmlinuz-2.6.32-21-generic
  21.7GB: boot/vmlinuz-2.6.32-24-generic
  21.7GB: boot/vmlinuz-2.6.32-25-generic
  21.8GB: initrd.img
  21.8GB: initrd.img.old
  21.7GB: vmlinuz
  21.7GB: vmlinuz.old
=========================== Unknown MBRs/Boot Sectors/etc =======================

Unknown BootLoader  on sda2

00000000  cd e7 13 54 76 8c 87 c4  3a 85 d0 df f1 4c aa 78  |...Tv...:....L.x|
00000010  df c4 ff 18 cf 90 09 b4  b2 b7 53 e2 fc 0f 7d 65  |..........S...}e|
00000020  c5 39 ad c4 2e d5 e3 5b  d2 54 67 5c 13 bd cc d4  |.9.....[.Tg\....|
00000030  5f ca e4 61 2a 5c 6b 59  1c 83 0b 30 9e 55 a8 fa  |_..a*\kY...0.U..|
00000040  4c 57 e7 b4 51 b0 00 21  dd 19 16 32 65 1e 31 f9  |LW..Q..!...2e.1.|
00000050  e1 c3 d6 df 75 90 42 f6  84 b7 5c 13 52 06 8e 1e  |....u.B...\.R...|
00000060  de 35 01 1a 39 8f b7 10  7f 50 9d 34 96 12 ca d4  |.5..9....P.4....|
00000070  48 b7 8a fd 8d ec ff bf  10 65 2f 66 dc 52 1a 93  |H........e/f.R..|
00000080  50 0d f1 04 c0 88 ca 0c  f1 de 21 3e b8 2f 20 90  |P.........!>./ .|
00000090  9d a4 c2 2d 1e ba d5 00  c7 7a 0a 9e c0 6d b8 ce  |...-.....z...m..|
000000a0  59 26 2c 67 9e e8 3a 51  9b fa 15 97 3b 5f 4b 5c  |Y&,g..:Q....;_K\|
000000b0  4b 94 6d ce a3 cf d8 9e  4a 94 27 ad cf 9f 56 10  |K.m.....J.'...V.|
000000c0  e7 27 9d 9d 1a 80 27 dd  86 93 b5 02 63 3b b8 37  |.'....'.....c;.7|
000000d0  7d 6f 4a c6 e7 8a 53 cf  ad 6c bd a8 a5 f1 c7 b1  |}oJ...S..l......|
000000e0  7f 30 de ec 44 3b b9 f4  ff 6e 9c 45 e8 4a 86 af  |.0..D;...n.E.J..|
000000f0  85 8f 50 3e 55 16 80 18  a7 61 b7 8a 9a 52 ac d9  |..P>U....a...R..|
00000100  e0 ff d7 86 11 fa 91 36  46 76 29 d7 eb e8 e8 fd  |.......6Fv).....|
00000110  f7 53 60 58 80 82 6c 5e  ea 45 1d f1 5b 78 5f b4  |.S`X..l^.E..[x_.|
00000120  93 26 85 97 c2 b4 f1 9b  34 9f bf 15 f6 e9 47 c7  |.&......4.....G.|
00000130  f8 08 c1 01 98 96 ec 79  99 83 18 3e d5 3b 91 84  |.......y...>.;..|
00000140  39 11 86 97 21 e5 91 64  46 e0 36 d9 6c 1b 1e 5a  |9...!..dF.6.l..Z|
00000150  6e f5 10 fc 70 af f0 4b  27 f9 93 90 6c 59 ee da  |n...p..K'...lY..|
00000160  80 23 49 45 2f fb c2 fb  6b 52 1d 56 bf f8 d2 b4  |.#IE/...kR.V....|
00000170  f5 0a 75 4b 2a c3 e3 ee  3f 81 04 04 92 7a f5 c9  |..uK*...?....z..|
00000180  6d 92 87 18 77 6a aa e4  0d c2 7b 7c 3c ca 12 e8  |m...wj....{|<...|
00000190  af 8c 0a 95 89 d2 1b 93  70 de 9b bf 5e 8a d5 6b  |........p...^..k|
000001a0  82 c5 77 7e 75 5c 60 a0  64 ae 89 ee b6 c6 f0 a8  |..w~u\`.d.......|
000001b0  10 7e 20 40 e6 e7 b7 75  17 e2 5f 92 ae e0 00 fe  |.~ @...u.._.....|
000001c0  ff ff 82 fe ff ff 02 00  00 00 00 80 62 00 00 00  |............b...|
000001d0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200

Hors ligne

#25 Le 19/09/2010, à 17:27

malbo

Re : [HOW TO] bootinfoscript

xavgd,
dans le post #1, je demande de ne pas poster ici. Je le recolle ici rien que pour toi :
ATTENTION : je répète qu'il ne faut pas poster ici votre résultat obtenu avec le script bootinfoscript : ce résultat, il faut le poster dans la discussion où vous avez posté récemment pour demander de l'aide pour votre problème. Moi je ne répondrai pas ici et j'espère que personne ne vous répondra non plus
Je te prie de supprimer ce post et de créer une nouvelle discussion dans la même rubrique du forum "Installation d'Ubuntu". Pour initier une nouvelle discussion, c'est là :
http://doc.ubuntu-fr.org/tutoriel/howto … discussion
Et essaie de trouver un bon titre (pas "j'ai besoin d'aide...") et de donner des détails (on ne sait même pas quels sont les symptômes de ton problème)

Dernière modification par malbo (Le 16/10/2010, à 10:20)

Hors ligne