#1 Le 21/05/2010, à 20:36
- siriusalpha
Erreurs dans le résultat de la commande dmesg
Bonsoir à tous
J'ai installé Ubuntu il y 1 semaine. depuis hier j'ai constaté des lenteurs de le temps de réponse ouverture de fichier ouverture du navigateur et autre. J'ai fais un tour sur le forum. Le sujet a été abordé mais je ne sais pas si la solution préconisée peut concerner mon cas. Alors j'ai lancé la commande dmesg. Je suis un peu perdu car pas mal d'erreurs font surface. Si quelqu'un pourrait y jeter un coup d'oeil afin de me diree ce qui ne va pas. Merci d'avance. Je signale que je suis un newbie d'Ubuntu.
dmesg
[ 0.645562] hub 2-0:1.0: 2 ports detected
[ 0.645720] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.645741] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.645753] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.645873] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.645958] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00007400
[ 0.646290] usb usb3: configuration #1 chosen from 1 choice
[ 0.646392] hub 3-0:1.0: USB hub found
[ 0.646417] hub 3-0:1.0: 2 ports detected
[ 0.646571] alloc irq_desc for 18 on node -1
[ 0.646578] alloc kstat_irqs on node -1
[ 0.646599] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.646620] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.646631] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.646759] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.646837] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00007800
[ 0.647165] usb usb4: configuration #1 chosen from 1 choice
[ 0.647270] hub 4-0:1.0: USB hub found
[ 0.647427] hub 4-0:1.0: 2 ports detected
[ 0.647599] alloc irq_desc for 19 on node -1
[ 0.647606] alloc kstat_irqs on node -1
[ 0.647624] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.647643] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.647654] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.647781] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.647867] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00008000
[ 0.648205] usb usb5: configuration #1 chosen from 1 choice
[ 0.648307] hub 5-0:1.0: USB hub found
[ 0.648332] hub 5-0:1.0: 2 ports detected
[ 0.648744] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.660719] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.660748] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.661258] mice: PS/2 mouse device common for all mice
[ 0.661705] rtc_cmos 00:03: RTC can wake from S4
[ 0.661847] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.661912] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.662348] device-mapper: uevent: version 1.0.3
[ 0.685286] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.688047] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.739651] device-mapper: multipath: version 1.1.0 loaded
[ 0.739665] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.744212] EISA: Probing bus 0 at eisa.0
[ 0.744280] Cannot allocate resource for EISA slot 7
[ 0.744290] Cannot allocate resource for EISA slot 8
[ 0.744298] EISA: Detected 0 cards.
[ 0.755588] cpuidle: using governor ladder
[ 0.755598] cpuidle: using governor menu
[ 0.757429] TCP cubic registered
[ 0.758048] NET: Registered protocol family 10
[ 0.759988] lo: Disabled Privacy Extensions
[ 0.761378] NET: Registered protocol family 17
[ 0.763079] Using IPI No-Shortcut mode
[ 0.763436] PM: Resume from disk failed.
[ 0.763486] registered taskstats version 1
[ 0.764485] Magic number: 10:478:951
[ 0.764568] tty tty8: hash matches
[ 0.764695] rtc_cmos 00:03: setting system clock to 2010-05-21 19:56:46 UTC (1274471806)
[ 0.764708] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.764715] EDD information not available.
[ 0.819510] isapnp: No Plug & Play device found
[ 0.948590] ata4.00: ATA-8: SAMSUNG HD502HJ, 1AJ100E4, max UDMA/133
[ 0.948604] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.956219] ata3.00: ATA-8: SAMSUNG HD502HJ, 1AJ100E4, max UDMA/133
[ 0.956231] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.956372] ata3.01: ATAPI: TSSTcorp CDDVDW SH-S223L, SB02, max UDMA/100
[ 0.964305] ata4.00: configured for UDMA/133
[ 0.967529] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 0.972179] ata3.00: configured for UDMA/133
[ 0.988056] ata3.01: configured for UDMA/100
[ 0.988877] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD502HJ 1AJ1 PQ: 0 ANSI: 5
[ 0.989438] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 0.990644] scsi 2:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S223L SB02 PQ: 0 ANSI: 5
[ 0.991215] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 0.992173] sd 2:0:0:0: [sda] Write Protect is off
[ 0.992185] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.992294] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.994394] sda: sda1 sda2 <sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.012461] Uniform CD-ROM driver Revision: 3.20
[ 1.012856] sr 2:0:1:0: Attached scsi CD-ROM sr0
[ 1.013072] sr 2:0:1:0: Attached scsi generic sg1 type 5
[ 1.013399] Freeing initrd memory: 7775k freed
[ 1.013552] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD502HJ 1AJ1 PQ: 0 ANSI: 5
[ 1.014075] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.014474] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.014684] sd 3:0:0:0: [sdb] Write Protect is off
[ 1.014697] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.014807] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.015556] sdb: sda5 sda6 >
[ 1.042730] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.088624] [LDM] sdb1
[ 1.090271] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 1.090322] Freeing unused kernel memory: 656k freed
[ 1.091367] Write protecting the kernel text: 4676k
[ 1.091539] Write protecting the kernel read-only data: 1840k
[ 1.157816] udev: starting version 151
[ 1.234618] usb 1-1: configuration #1 chosen from 1 choice
[ 1.533392] sata_via 0000:01:00.0: version 2.4
[ 1.533444] sata_via 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.533553] sata_via 0000:01:00.0: routed to hard irq line 10
[ 1.548623] scsi4 : sata_via
[ 1.551199] scsi5 : sata_via
[ 1.551515] scsi6 : sata_via
[ 1.551682] ata5: SATA max UDMA/133 port i16@0xb800 bmdma 0xa400 irq 17
[ 1.551696] ata6: SATA max UDMA/133 port i16@0xb400 bmdma 0xa408 irq 17
[ 1.551707] ata7: PATA max UDMA/133 port i16@0xb000 bmdma 0xa410 irq 17
[ 1.561199] Floppy drive(s): fd0 is 1.44M
[ 1.580663] FDC 0 is a post-1991 82077
[ 1.696070] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 1.880357] ata5: SATA link down (SStatus 0 SControl 310)
[ 1.896845] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 1.904453] usb 3-1: configuration #1 chosen from 1 choice
[ 2.144064] usb 3-2: new full speed USB device using uhci_hcd and address 3
[ 2.215164] ata6: SATA link down (SStatus 0 SControl 310)
[ 2.354245] usb 3-2: configuration #1 chosen from 1 choice
[ 9.266244] udev: starting version 151
[ 9.323678] Adding 6037496k swap on /dev/sda6. Priority:-1 extents:1 across:6037496k
[ 9.530481] vga16fb: initializing
[ 9.530496] vga16fb: mapped to 0xc00a0000
[ 9.530718] fb0: VGA16 VGA frame buffer device
[ 9.530887] Linux agpgart interface v0.103
[ 9.544928] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 9.544942] Copyright (c) 2007 Atheros Corporation.
[ 9.545062] atl2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.545092] atl2 0000:02:00.0: setting latency timer to 64
[ 9.646405] intel_rng: FWH not detected
[ 9.663654] lp: driver loaded but no devices found
[ 9.702557] NET: Registered protocol family 8
[ 9.702570] NET: Registered protocol family 20
[ 9.803110] Linux video capture interface: v2.00
[ 9.809969] usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1004
[ 9.810048] usbcore: registered new interface driver usblp
[ 9.850158] parport_pc 00:07: reported by Plug and Play ACPI
[ 9.850277] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 9.948924] lp0: using parport0 (interrupt-driven).
[ 10.048082] type=1505 audit(1274464615.783:2): operation="profile_load" pid=601 name="/sbin/dhclient3"
[ 10.050155] type=1505 audit(1274464615.783:3): operation="profile_load" pid=601 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 10.050914] type=1505 audit(1274464615.783:4): operation="profile_load" pid=601 name="/usr/lib/connman/scripts/dhclient-script"
[ 10.117383] psmouse serio1: ID: 10 00 64
[ 10.187885] nvidia: module license 'NVIDIA' taints kernel.
[ 10.504551] usb 3-1: reset full speed USB device using uhci_hcd and address 2
[ 10.681777] usbcore: registered new interface driver speedtch
[ 10.686939] speedtch 3-1:1.0: firmware: requesting speedtch-1.bin.2.00
[ 10.787689] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[ 11.442980] uvcvideo: Found UVC 1.00 device <unnamed> (046d:09a1)
[ 11.490245] input: UVC Camera (046d:09a1) as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/input/input5
[ 11.490629] usbcore: registered new interface driver uvcvideo
[ 11.491306] USB Video Class driver (v0.1.0)
[ 11.494568] ppdev: user-space parallel port driver
[ 11.559763] speedtch 3-1:1.0: found stage 1 firmware speedtch-1.bin.2.00
[ 11.559770] speedtch 3-1:1.0: firmware: requesting speedtch-2.bin.2.00
[ 11.611506] speedtch 3-1:1.0: found stage 2 firmware speedtch-2.bin.2.00
[ 11.628618] nvidia 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.628629] nvidia 0000:04:00.0: setting latency timer to 64
[ 11.629561] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.22 Sun Nov 8 20:26:31 PST 2009
[ 11.695869] Console: switching to colour frame buffer device 80x30
[ 11.830501] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 11.830609] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.992502] type=1505 audit(1274464617.727:5): operation="profile_load" pid=767 name="/usr/share/gdm/guest-session/Xsession"
[ 12.013024] usbcore: registered new interface driver snd-usb-audio
[ 12.015631] type=1505 audit(1274464617.747:6): operation="profile_replace" pid=771 name="/sbin/dhclient3"
[ 12.019156] type=1505 audit(1274464617.751:7): operation="profile_replace" pid=771 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 12.020183] type=1505 audit(1274464617.755:8): operation="profile_replace" pid=771 name="/usr/lib/connman/scripts/dhclient-script"
[ 12.055799] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 12.137513] type=1505 audit(1274464617.871:9): operation="profile_load" pid=776 name="/usr/bin/evince"
[ 12.346608] type=1505 audit(1274464618.079:10): operation="profile_load" pid=776 name="/usr/bin/evince-previewer"
[ 12.423456] type=1505 audit(1274464618.155:11): operation="profile_load" pid=776 name="/usr/bin/evince-thumbnailer"
[ 14.246382] usb 3-2: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 16.245733] ATM dev 0: ADSL line is synchronising
[ 27.608247] ATM dev 0: DSL line goes up
[ 27.614249] ATM dev 0: ADSL line is up (608 kb/s down | 160 kb/s up)
[ 31.101207] PPP BSD Compression module registered
[ 31.104606] PPP Deflate Compression module registered
[ 33.756718] end_request: I/O error, dev fd0, sector 0
[ 46.256357] end_request: I/O error, dev fd0, sector 0
[ 60.428408] end_request: I/O error, dev fd0, sector 0
[ 72.592632] end_request: I/O error, dev fd0, sector 0
[ 72.592641] __ratelimit: 9 callbacks suppressed
[ 72.592646] Buffer I/O error on device fd0, logical block 0
[ 84.760741] end_request: I/O error, dev fd0, sector 0
[ 84.760751] Buffer I/O error on device fd0, logical block 0
[ 96.932429] end_request: I/O error, dev fd0, sector 0
[ 96.932438] Buffer I/O error on device fd0, logical block 0
[ 109.097267] end_request: I/O error, dev fd0, sector 0
[ 109.097277] Buffer I/O error on device fd0, logical block 0
[ 121.260424] end_request: I/O error, dev fd0, sector 0
[ 121.260434] Buffer I/O error on device fd0, logical block 0
[ 133.428683] end_request: I/O error, dev fd0, sector 0
[ 133.428693] Buffer I/O error on device fd0, logical block 0
[ 145.600371] end_request: I/O error, dev fd0, sector 0
[ 145.600381] Buffer I/O error on device fd0, logical block 0
[ 157.768651] end_request: I/O error, dev fd0, sector 0
[ 157.768661] Buffer I/O error on device fd0, logical block 0
[ 169.936928] end_request: I/O error, dev fd0, sector 0
[ 169.936938] Buffer I/O error on device fd0, logical block 0
[ 182.104505] end_request: I/O error, dev fd0, sector 0
[ 182.104515] Buffer I/O error on device fd0, logical block 0
[ 194.268676] end_request: I/O error, dev fd0, sector 0
[ 194.268686] Buffer I/O error on device fd0, logical block 0
[ 206.440356] end_request: I/O error, dev fd0, sector 0
[ 206.440366] Buffer I/O error on device fd0, logical block 0
[ 218.604538] end_request: I/O error, dev fd0, sector 0
[ 218.604548] Buffer I/O error on device fd0, logical block 0
[ 230.768720] end_request: I/O error, dev fd0, sector 0
[ 230.768730] Buffer I/O error on device fd0, logical block 0
[ 242.940400] end_request: I/O error, dev fd0, sector 0
[ 242.940409] Buffer I/O error on device fd0, logical block 0
[ 255.108683] end_request: I/O error, dev fd0, sector 0
[ 255.108693] Buffer I/O error on device fd0, logical block 0
[ 267.280374] end_request: I/O error, dev fd0, sector 0
[ 267.280384] Buffer I/O error on device fd0, logical block 0
[ 279.448659] end_request: I/O error, dev fd0, sector 0
[ 279.448669] Buffer I/O error on device fd0, logical block 0
[ 291.616938] end_request: I/O error, dev fd0, sector 0
[ 291.616947] Buffer I/O error on device fd0, logical block 0
[ 299.988015] Machine check events logged
[ 303.784520] end_request: I/O error, dev fd0, sector 0
[ 303.784530] Buffer I/O error on device fd0, logical block 0
[ 315.952823] end_request: I/O error, dev fd0, sector 0
[ 315.952833] Buffer I/O error on device fd0, logical block 0
[ 328.120427] end_request: I/O error, dev fd0, sector 0
[ 328.120437] Buffer I/O error on device fd0, logical block 0
[ 340.288698] end_request: I/O error, dev fd0, sector 0
[ 340.288707] Buffer I/O error on device fd0, logical block 0
[ 352.456971] end_request: I/O error, dev fd0, sector 0
[ 352.456981] Buffer I/O error on device fd0, logical block 0
[ 364.628649] end_request: I/O error, dev fd0, sector 0
[ 364.628658] Buffer I/O error on device fd0, logical block 0
[ 376.796922] end_request: I/O error, dev fd0, sector 0
[ 376.796931] Buffer I/O error on device fd0, logical block 0
[ 388.964485] end_request: I/O error, dev fd0, sector 0
[ 388.964494] Buffer I/O error on device fd0, logical block 0
[ 401.128665] end_request: I/O error, dev fd0, sector 0
[ 401.128675] Buffer I/O error on device fd0, logical block 0
[ 413.296924] end_request: I/O error, dev fd0, sector 0
[ 413.296934] Buffer I/O error on device fd0, logical block 0
[ 425.464523] end_request: I/O error, dev fd0, sector 0
[ 425.464532] Buffer I/O error on device fd0, logical block 0
[ 437.628680] end_request: I/O error, dev fd0, sector 0
[ 437.628690] Buffer I/O error on device fd0, logical block 0
[ 449.800358] end_request: I/O error, dev fd0, sector 0
[ 449.800367] Buffer I/O error on device fd0, logical block 0
[ 461.968623] end_request: I/O error, dev fd0, sector 0
[ 461.968632] Buffer I/O error on device fd0, logical block 0
[ 474.132800] end_request: I/O error, dev fd0, sector 0
[ 474.132809] Buffer I/O error on device fd0, logical block 0
[ 486.300394] end_request: I/O error, dev fd0, sector 0
[ 486.300403] Buffer I/O error on device fd0, logical block 0
[ 498.468667] end_request: I/O error, dev fd0, sector 0
[ 498.468676] Buffer I/O error on device fd0, logical block 0
[ 510.636927] end_request: I/O error, dev fd0, sector 0
[ 510.636936] Buffer I/O error on device fd0, logical block 0
[ 522.804513] end_request: I/O error, dev fd0, sector 0
[ 522.804522] Buffer I/O error on device fd0, logical block 0
[ 534.968747] end_request: I/O error, dev fd0, sector 0
[ 534.968756] Buffer I/O error on device fd0, logical block 0
[ 547.140439] end_request: I/O error, dev fd0, sector 0
[ 547.140448] Buffer I/O error on device fd0, logical block 0
[ 559.324669] end_request: I/O error, dev fd0, sector 0
[ 571.508867] end_request: I/O error, dev fd0, sector 0
[ 583.681227] end_request: I/O error, dev fd0, sector 0
[ 583.681237] Buffer I/O error on device fd0, logical block 0
[ 591.568294] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 591.568299] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 594.440709] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 594.440715] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 595.848762] end_request: I/O error, dev fd0, sector 0
[ 595.848772] Buffer I/O error on device fd0, logical block 0
[ 608.016353] end_request: I/O error, dev fd0, sector 0
[ 608.016363] Buffer I/O error on device fd0, logical block 0
[ 620.180505] end_request: I/O error, dev fd0, sector 0
[ 620.180514] Buffer I/O error on device fd0, logical block 0
[ 632.348772] end_request: I/O error, dev fd0, sector 0
[ 632.348782] Buffer I/O error on device fd0, logical block 0
[ 644.520459] end_request: I/O error, dev fd0, sector 0
[ 644.520469] Buffer I/O error on device fd0, logical block 0
[ 656.684641] end_request: I/O error, dev fd0, sector 0
[ 656.684651] Buffer I/O error on device fd0, logical block 0
[ 668.852898] end_request: I/O error, dev fd0, sector 0
[ 668.852906] Buffer I/O error on device fd0, logical block 0
[ 669.933432] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 669.933438] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 672.778901] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 672.778905] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 681.016652] end_request: I/O error, dev fd0, sector 0
[ 681.016662] Buffer I/O error on device fd0, logical block 0
[ 687.093475] CPU1: Temperature above threshold, cpu clock throttled (total events = 4009)
[ 687.094126] CPU1: Temperature/speed normal
[ 693.204709] end_request: I/O error, dev fd0, sector 0
[ 693.204718] Buffer I/O error on device fd0, logical block 0
[ 705.373638] end_request: I/O error, dev fd0, sector 0
[ 705.373648] Buffer I/O error on device fd0, logical block 0
[ 717.532679] end_request: I/O error, dev fd0, sector 0
[ 717.532690] Buffer I/O error on device fd0, logical block 0
[ 729.704354] end_request: I/O error, dev fd0, sector 0
[ 729.704366] Buffer I/O error on device fd0, logical block 0
[ 741.872654] end_request: I/O error, dev fd0, sector 0
[ 741.872665] Buffer I/O error on device fd0, logical block 0
[ 749.988062] Machine check events logged
[ 754.032701] end_request: I/O error, dev fd0, sector 0
[ 754.032711] Buffer I/O error on device fd0, logical block 0
[ 766.204413] end_request: I/O error, dev fd0, sector 0
[ 766.204423] Buffer I/O error on device fd0, logical block 0
[ 778.372680] end_request: I/O error, dev fd0, sector 0
[ 778.372690] Buffer I/O error on device fd0, logical block 0
[ 781.704396] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 781.704401] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 790.540904] end_request: I/O error, dev fd0, sector 0
[ 790.540914] Buffer I/O error on device fd0, logical block 0
[ 802.716668] end_request: I/O error, dev fd0, sector 0
[ 802.716678] Buffer I/O error on device fd0, logical block 0
[ 814.892774] end_request: I/O error, dev fd0, sector 0
[ 814.892784] Buffer I/O error on device fd0, logical block 0
[ 827.060386] end_request: I/O error, dev fd0, sector 0
[ 827.060399] Buffer I/O error on device fd0, logical block 0
[ 839.232756] end_request: I/O error, dev fd0, sector 0
[ 839.232766] Buffer I/O error on device fd0, logical block 0
[ 851.408505] end_request: I/O error, dev fd0, sector 0
[ 851.408515] Buffer I/O error on device fd0, logical block 0
[ 863.572686] end_request: I/O error, dev fd0, sector 0
[ 863.572696] Buffer I/O error on device fd0, logical block 0
[ 875.740938] end_request: I/O error, dev fd0, sector 0
[ 875.740948] Buffer I/O error on device fd0, logical block 0
[ 887.908516] end_request: I/O error, dev fd0, sector 0
[ 887.908526] Buffer I/O error on device fd0, logical block 0
[ 900.072695] end_request: I/O error, dev fd0, sector 0
[ 900.072705] Buffer I/O error on device fd0, logical block 0
[ 912.244368] end_request: I/O error, dev fd0, sector 0
[ 912.244378] Buffer I/O error on device fd0, logical block 0
[ 924.412645] end_request: I/O error, dev fd0, sector 0
[ 924.412656] Buffer I/O error on device fd0, logical block 0
[ 936.580923] end_request: I/O error, dev fd0, sector 0
[ 936.580932] Buffer I/O error on device fd0, logical block 0
[ 948.748489] end_request: I/O error, dev fd0, sector 0
[ 948.748500] Buffer I/O error on device fd0, logical block 0
[ 960.912638] end_request: I/O error, dev fd0, sector 0
[ 960.912648] Buffer I/O error on device fd0, logical block 0
[ 973.080887] end_request: I/O error, dev fd0, sector 0
[ 973.080897] Buffer I/O error on device fd0, logical block 0
[ 985.248466] end_request: I/O error, dev fd0, sector 0
[ 985.248476] Buffer I/O error on device fd0, logical block 0
[ 997.412631] end_request: I/O error, dev fd0, sector 0
[ 997.412642] Buffer I/O error on device fd0, logical block 0
[ 1009.580897] end_request: I/O error, dev fd0, sector 0
[ 1009.580908] Buffer I/O error on device fd0, logical block 0
[ 1021.748518] end_request: I/O error, dev fd0, sector 0
[ 1021.748528] Buffer I/O error on device fd0, logical block 0
[ 1033.912692] end_request: I/O error, dev fd0, sector 0
[ 1033.912702] Buffer I/O error on device fd0, logical block 0
[ 1046.084375] end_request: I/O error, dev fd0, sector 0
[ 1046.084385] Buffer I/O error on device fd0, logical block 0
[ 1058.252642] end_request: I/O error, dev fd0, sector 0
[ 1058.252653] Buffer I/O error on device fd0, logical block 0
[ 1070.420444] end_request: I/O error, dev fd0, sector 0
[ 1153.209260] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 1153.209266] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 1155.419232] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1155.419238] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1170.259266] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1170.259272] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1186.362040] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1186.362046] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1206.545249] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1206.545255] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1214.436239] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 1214.436245] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 1220.416958] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1220.416964] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1257.180903] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1257.180909] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1276.651061] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 1276.651066] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 1277.505923] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1277.505929] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1291.679093] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1291.679098] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1336.228929] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 1336.228935] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 1339.464176] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1339.464181] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1353.179104] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1353.179110] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1374.719149] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1374.719154] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1416.674285] CPU1: Temperature above threshold, cpu clock throttled (total events = 4129)
[ 1416.674933] CPU1: Temperature/speed normal
[ 1457.964008] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 1457.964013] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 1477.428010] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1477.428015] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1482.395320] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1482.395326] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1499.988517] Machine check events logged
[ 1554.077763] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 1554.077769] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 1608.021556] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1608.021562] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1614.619069] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 1614.619075] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 1623.989502] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1623.989508] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1653.102467] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1653.102473] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1693.500977] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 1693.500983] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 1704.179290] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1704.179296] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1716.673003] CPU1: Temperature above threshold, cpu clock throttled (total events = 23200)
[ 1716.673652] CPU1: Temperature/speed normal
[ 1755.592147] CPU0: Temperature above threshold, cpu clock throttled (total events = 24198)
[ 1755.592793] CPU0: Temperature/speed normal
[ 1783.959567] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 1783.959573] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 1793.234612] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1793.234618] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1798.107686] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1798.107692] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1800.000019] Machine check events logged
[ 1806.769815] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1806.769821] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1813.636690] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1813.636695] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1824.311677] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1824.311683] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1828.853148] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1828.853153] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1838.075503] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1838.075509] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1843.783653] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 1843.783659] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 1844.449379] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1844.449385] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1848.834130] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1848.834137] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1854.454132] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1854.454138] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1862.829373] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1862.829379] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1867.086206] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1867.086211] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1871.812782] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1871.812788] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1877.257938] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1877.257944] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1882.900532] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1882.900538] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1887.078939] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1887.078945] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1890.847038] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1890.847044] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1896.475958] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1896.475964] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1905.216041] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 1905.216047] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 1909.527089] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1909.527095] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1919.973923] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1919.973929] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1924.854014] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1924.854020] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1933.946105] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1933.946111] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1938.934130] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1938.934136] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1943.096640] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1943.096646] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1947.727490] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1947.727496] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1952.833420] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1952.833426] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1959.620850] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1959.620856] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1964.517593] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1964.517599] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1966.948641] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 1966.948647] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 1973.757882] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1973.757888] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1978.124524] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1978.124530] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1982.901468] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1982.901474] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1987.967102] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1987.967108] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1992.253796] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1992.253802] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 1999.968506] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 1999.968512] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 2009.948455] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 2009.948461] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 2013.919162] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 2013.919168] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 2019.965332] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 2019.965338] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 2024.437247] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 2024.437253] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 2026.534565] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 2026.534571] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 2028.646218] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 2028.646224] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 2037.494005] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 2037.494011] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 2062.074565] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 2062.074570] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 2082.034559] CPU1: Temperature above threshold, cpu clock throttled (total events = 25317)
[ 2082.035207] CPU1: Temperature/speed normal
[ 2091.645127] atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
[ 2091.645133] atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
[ 2095.529031] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 2095.529037] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
[ 2105.579279] atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
[ 2105.579285] atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
aldebran@Nasa-desktop:/$[edit modo] : j'ai juste rajouté des balises de code.
Dernière modification par Р☢w ! ✰ :mad: ✰ (эй !) (Le 21/05/2010, à 20:57)
Hors ligne
#2 Le 21/05/2010, à 20:38
- helly
Re : Erreurs dans le résultat de la commande dmesg
Au secour !!!
Les balises code !!!!
Archlinux-wmii-dwb.
Un problème résolu ? Faites le savoir en mettant [résolu] à côté du titre de votre topic.
Un problème non résolu ? Faites le savoir en insultant ceux qui cherchent à vous aider.
Un site bleu super remasterised©, un wiki cherchant des volontaires pour traduire un site.
Hors ligne
#3 Le 21/05/2010, à 20:47
- JB-home
Re : Erreurs dans le résultat de la commande dmesg
si ça peut t'aider : http://ubuntuforums.org/showthread.php?t=76271
Hors ligne
#4 Le 21/05/2010, à 21:07
- kyncani
Re : Erreurs dans le résultat de la commande dmesg
Apparemment, tu as des problèmes de surchauffe de ton cpu, cf
[ 2082.034559] CPU1: Temperature above threshold, cpu clock throttled (total events = 25317)
[ 2082.035207] CPU1: Temperature/speed normalLorsque cela arrive, la fréquence du cpu est diminuée le temps qu'il refroidisse, ce qui est une bonne chose pour éviter qu'il ne cramme tous les composants à côté.
Evidemment, ça veut aussi dire que la puissance de calcul diminue, et ça peut donc ramer un peu.
Commence déjà par un dépoussiérage du pc et des ventilos.
Hors ligne
#5 Le 21/05/2010, à 21:48
- siriusalpha
Re : Erreurs dans le résultat de la commande dmesg
Merci Kynkani.
En effet j'ai un boîtier serveur metallique et plusieurs ventilateurs. J'avais baissé la vitesse de rotation pour réduire un peu le bruit. Là tt compte fais j'ai remonté la vitesse. On verra.
Sinon Zorg j'ai été voir le liens que tu m a fourni et ce dont de je te remercie. Un peu complexe. Je comprends l'anglais, mais là ça deviens un peux compliqué. Je ne comprends pas cette histoire de " atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.". Bref je vais faire mon shopping de connaissance sur le net pour voir de quoi il retourne.
Bonne soirée à tous
Hors ligne
#6 Le 21/05/2010, à 22:10
- JB-home
Re : Erreurs dans le résultat de la commande dmesg
Sinon Zorg j'ai été voir le liens que tu m a fourni et ce dont de je te remercie. Un peu complexe. Je comprends l'anglais, mais là ça deviens un peux compliqué. Je ne comprends pas cette histoire de " atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.". Bref je vais faire mon shopping de connaissance sur le net pour voir de quoi il retourne.
je pensé à un problème du clavier multimédia ( si tu en a un ) d'après ce que j'ai compris ( car je suis nul en anglais )
Hors ligne
#7 Le 21/05/2010, à 22:21
- siriusalpha
Re : Erreurs dans le résultat de la commande dmesg
C'es t ce que j'ai vu. Une question de Keyboard. J'essaie de comprendre de quelle "translate" il s'agit. Il me semble que certaines touches de mon clavier lui posent problème car il n'arrive pas à résoudre leur traduction
Hors ligne