Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 11/06/2010, à 13:58

kimble

LUCID:Lecture normale des fichiers audio et/ou video impossible

Bonjour,
J'ai toujours le meme problème depuis mon passage de KARMIC 64 à LUCID 64 :
            Impossible de lire correctement mes fichiers video ou audio.
Le son "saute" comme si je lisais un vinyle défectueux et les videos comme si je lisais un DVD ayant perdu ses repères.
J'ai essayé plusieurs lecteurs TOTEM bien sur mais aussi ADACIOUS,AMAROK,VLC et meme KAFFEINE.
       VLC pourtant d'après ce que j'ai compris a ses propres "greffons" (il n'utilise pas Gstreamer).
Le problème ne vient pas des fichiers car:
    -Ils fonctionnent sous KARMIC (je l'ai réinstallé)
    -Ils fonctionnent sous Windows (j'en ai copié un certain nombre dans ma partition commune avec Windows (formatée en NTFS) et la lecture est parfaite avec... VLC (un comble).
Je pense que c'est surtout un problème de son. En lecture video un défaut de son donne des "hoquets" à l'image.
Alors problème de carte son ?
Mais ce n'est pas le matériel puisque ça fonctionne sous Windows et sous KARMIC.
Problème de pilote de carte son sous LUCID (ALSA je crois ?) Il y a bien-sur de nouvelles versions avec LUCID.
Mais là je décroche (je n'utilise GNU/linux que depuis novembre 2009).
Ce qui m'inquiète le plus c'est que je n'ai pas trouvé dans le forum un seul autre post exposant un problème semblable au mien.
Alors à l'aide.
KIMBLE

P.S. Je précise que j'ai essayé tous les "greffons" y compris ceux du dépot Medibuntu.

Dernière modification par kimble (Le 11/06/2010, à 14:11)


Ordinateur: HP DC5850 UT.Processeur AMD Phenom triple core 8600B (64 Bits)
O.S: Windows XP SP3 32 Bits et Ubuntu 64 bits 10.10  (En dual boot sur 2 disques séparés.)
Portable Asus N76VZ-V2G-T1002V Windows 7/Ubuntu 12 64 bits (En dual boot sur 2 disques séparés)
LIVEBOX 2 MINi liaison Ethernet. pour le bureau Wifi pour le portable (quand je peux me connecter )

Hors ligne

#2 Le 11/06/2010, à 16:53

browny

Re : LUCID:Lecture normale des fichiers audio et/ou video impossible

Salut,

Sont-ce des videos HD que tu essaies de relire ?

Que te donne un mplayer lancé en console ?

mplayer tavideo.avi

Et autre chose, ton processur ne serait pas bloqué à sa fréquence "powersave" ?

Hors ligne

#3 Le 12/06/2010, à 11:50

kimble

Re : LUCID:Lecture normale des fichiers audio et/ou video impossible

Bonjour Browny,
Ce ne sont pas des videos H.D.
Pour la plupart ce sont des enregistrements d'émission de ARTE "format" .WMV . Mais d'autre fichiers sont en .FLV et TOUS fonctionnent sans erreur que ce soit avec lecteur video (TOTEM) ou VLC sous KARMIC et pour certains ,je ne les ais pas tous essayés, sous Windows avec VLC.
Comme tu demandais d'essayer un fichier .AVI j'en ai transcodé (avec WINFF) un que je connais presque par-coeur (depuis 15 jours que j'essaie de trouver). voici ce que ça donne en le lançant avec MPLAYER en terminal (j'ai arreté au bout de 6 minutes environ) :

louis@louis-desktop:~$ mplayer '/home/louis/Bureau/L'\''art de la trompette 23. mai 2010.avi' 
MPlayer SVN-r1.0~rc3+svn20090426-4.4.3 (C) 2000-2009 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

Playing /home/louis/Bureau/L'art de la trompette 23. mai 2010.avi.
AVI file format detected.
[aviheader] Video stream found, -vid 0
[aviheader] Audio stream found, -aid 1
VIDEO:  [DIV3]  640x480  24bpp  25.000 fps  1000.7 kbps (122.2 kbyte/s)
Clip info:
 Software: Lavf52.31.0
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
open: No such file or directory
[MGA] Couldn't open: /dev/mga_vid
[VO_TDFXFB] Can't open /dev/fb0: Permission denied.
[VO_3DFX] Unable to open /dev/3dfx.
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffdivx] vfm: ffmpeg (FFmpeg DivX ;-) (MSMPEG-4 v3))
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 44100 Hz, 2 ch, s16le, 192.0 kbit/13.61% (ratio: 24000->176400)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [pulse] 44100Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 640 x 480 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.77:1 - prescaling to correct movie aspect.
VO: [xv] 640x480 => 852x480 Planar YV12 
No bind found for key 'MOUSE_BTN0'.                         0.7% 4 0 
A: 408.4 V: 408.4 A-V:  0.000 ct: -0.040 10210/10210  5%  0%  0.7% 6 0 
Exiting... (Quit)
louis@louis-desktop:~$

Il y a eu pendant ce temps environ 5 erreurs de lecture.
J'espère que cela t'inspirera plus que moi.
Quand tu écris :

"Et autre chose, ton processeur ne serait pas bloqué à sa fréquence "powersave" ?"

J'avoue que là aussi.. je décroche ???
En attendant merci de ta réponse.
KIMBLE

Dernière modification par kimble (Le 12/06/2010, à 11:55)


Ordinateur: HP DC5850 UT.Processeur AMD Phenom triple core 8600B (64 Bits)
O.S: Windows XP SP3 32 Bits et Ubuntu 64 bits 10.10  (En dual boot sur 2 disques séparés.)
Portable Asus N76VZ-V2G-T1002V Windows 7/Ubuntu 12 64 bits (En dual boot sur 2 disques séparés)
LIVEBOX 2 MINi liaison Ethernet. pour le bureau Wifi pour le portable (quand je peux me connecter )

Hors ligne

#4 Le 13/06/2010, à 15:09

kimble

Re : LUCID:Lecture normale des fichiers audio et/ou video impossible

Bonjour à tous,
Alors, personne n'a une piste de recherche pour résoudre mon problème ?


Ordinateur: HP DC5850 UT.Processeur AMD Phenom triple core 8600B (64 Bits)
O.S: Windows XP SP3 32 Bits et Ubuntu 64 bits 10.10  (En dual boot sur 2 disques séparés.)
Portable Asus N76VZ-V2G-T1002V Windows 7/Ubuntu 12 64 bits (En dual boot sur 2 disques séparés)
LIVEBOX 2 MINi liaison Ethernet. pour le bureau Wifi pour le portable (quand je peux me connecter )

Hors ligne

#5 Le 14/06/2010, à 09:50

browny

Re : LUCID:Lecture normale des fichiers audio et/ou video impossible

Salut,

Excuse moi, j'étais pas à ma maison ce week-end du coup j'ai pas pu te répondre.

Je vois que ton mplayer utilise le greffon de sortie xv qui n'est pas super. Le pilote de ta carte graphique est-il installé ? Tu peux le vérifier que le direct rendering est bien activé avec la commande :

glxinfo | grep direct

Si le direct rendering est activé (yes) alors essayer avec le greffon de sortie gl de mplayer en tapant :

mplayer '/home/louis/Bureau/L'\''art de la trompette 23. mai 2010.avi' -vo gl

Sinon, il va falloir installer le pilote de ta carte graphique (à l'aide du jockey ou dans les menu Administration/Pilotes...)

Quand à la fréquence powersave, si tu connais la fréquence de ton processeur tu peux la vérifier au repos en faisant un :

cat /proc/cpuinfo | grep "cpu MHz"

Le 8600B tourne à 2,3Ghz. Donc, si la valeur est déjà au repos à environ 2300 MHz, c'est que la fréquence de ton proc ne varie pas.

Sinon il faut tester en charge (lancer une video youtube dans firefox par exemple) et retaper la même commande pour vérifier si le processeur monte à ses 2300Mhz.

Dernière modification par browny (Le 14/06/2010, à 09:51)

Hors ligne

#6 Le 15/06/2010, à 09:18

kimble

Re : LUCID:Lecture normale des fichiers audio et/ou video impossible

Bonjour à tous
Et merci à browny qui veut bien s'occuper de mon problème.
Voici les copies de "terminal" (j'ai rajouté des commentaires en MAJUSCULES.
- 1er cas avec lancement d'une video sur Firefox + lecture d'un fichier video avec Mplayer avec mise en "plein écran des deux videos :

louis@louis-desktop:~$ glxinfo | grep direct
direct rendering: Yes

A VIDE

louis@louis-desktop:~$ cat /proc/cpuinfo | grep "cpu MHz"
cpu MHz		: 1150.000
cpu MHz		: 1150.000
cpu MHz		: 1150.000

APRES LANCEMENT D'UNE VIDEO AVEC FIREFOX

louis@louis-desktop:~$ cat /proc/cpuinfo | grep "cpu MHz"
cpu MHz		: 1150.000
cpu MHz		: 1150.000
cpu MHz		: 1150.000

LANCEMENT DE "Trompette.avi

louis@louis-desktop:~$ mplayer '/home/louis/Bureau/Trompette.avi' -vo gl
MPlayer SVN-r1.0~rc3+svn20090426-4.4.3 (C) 2000-2009 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

Playing /home/louis/Bureau/Trompette.avi.
AVI file format detected.
[aviheader] Video stream found, -vid 0
[aviheader] Audio stream found, -aid 1
VIDEO:  [DIV3]  640x480  24bpp  25.000 fps  1000.7 kbps (122.2 kbyte/s)
Clip info:
 Software: Lavf52.31.0
[gl] using extended formats. Use -vo gl:nomanyfmts if playback fails.
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffdivx] vfm: ffmpeg (FFmpeg DivX ;-) (MSMPEG-4 v3))
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 44100 Hz, 2 ch, s16le, 192.0 kbit/13.61% (ratio: 24000->176400)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [pulse] 44100Hz 2ch s16le (2 bytes per sample)

ENVIRON 6 MINUTES DE LECTURE SANS ERREUR

Starting playback...
VDec: vo config request - 640 x 480 (preferred colorspace: Planar YV12)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.77:1 - prescaling to correct movie aspect.
[swscaler @ 0x7f5bcd761660]using unscaled yuv420p -> rgb32 special converter
VO: [gl] 640x480 => 852x480 BGRA 
No bind found for key 'MOUSE_BTN0'.                         0% 3 0 
A: 482.2 V: 482.2 A-V: -0.001 ct: -0.038 12054/12054  9% 26%  0.9% 13 0 
Exiting... (Quit)
louis@louis-desktop:~$

AUCUNE ERREUR DE LECTURE

2ème cas lancement de la lecture d'un fichier avec Mplayer SEUL :

louis@louis-desktop:~$ glxinfo | grep direct
direct rendering: Yes

louis@louis-desktop:~$ cat /proc/cpuinfo | grep "cpu MHz"
cpu MHz		: 1150.000
cpu MHz		: 1150.000
cpu MHz		: 1150.000

louis@louis-desktop:~$ mplayer '/home/louis/Bureau/Trompette.avi' -vo gl

MPlayer SVN-r1.0~rc3+svn20090426-4.4.3 (C) 2000-2009 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

Playing /home/louis/Bureau/Trompette.avi.
AVI file format detected.
[aviheader] Video stream found, -vid 0
[aviheader] Audio stream found, -aid 1
VIDEO:  [DIV3]  640x480  24bpp  25.000 fps  1000.7 kbps (122.2 kbyte/s)
Clip info:
 Software: Lavf52.31.0
[gl] using extended formats. Use -vo gl:nomanyfmts if playback fails.
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffdivx] vfm: ffmpeg (FFmpeg DivX ;-) (MSMPEG-4 v3))
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 44100 Hz, 2 ch, s16le, 192.0 kbit/13.61% (ratio: 24000->176400)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [pulse] 44100Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 640 x 480 (preferred colorspace: Planar YV12)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.77:1 - prescaling to correct movie aspect.
[swscaler @ 0x7fd4b1c9d660]using unscaled yuv420p -> rgb32 special converter
VO: [gl] 640x480 => 852x480 BGRA 
A: 672.9 V: 672.5 A-V:  0.402 ct: -0.043 16812/16812  8% 21%  0.7% 51 0

NOMBREUSES ERREURS DE LECTURE 

           ************************************************
           **** Your system is too SLOW to play this!  ****
           ************************************************

Possible reasons, problems, workarounds:
- Most common: broken/buggy _audio_ driver
  - Try -ao sdl or use the OSS emulation of ALSA.
  - Experiment with different values for -autosync, 30 is a good start.
- Slow video output
  - Try a different -vo driver (-vo help for a list) or try -framedrop!
- Slow CPU
  - Don't try to play a big DVD/DivX on a slow CPU! Try some of the lavdopts,
    e.g. -vfm ffmpeg -lavdopts lowres=1:fast:skiploopfilter=all.
- Broken file
  - Try various combinations of -nobps -ni -forceidx -mc 0.
- Slow media (NFS/SMB mounts, DVD, VCD etc)
  - Try -cache 8192.
- Are you using -cache to play a non-interleaved AVI file?
  - Try -nocache.
Read DOCS/HTML/en/video.html for tuning/speedup tips.
If none of this helps you, read DOCS/HTML/en/bugreports.html.

A: 675.2 V: 675.2 A-V:  0.004 ct: -0.042 16881/16881  8% 21%  0.7% 63 0 
Exiting... (Quit)
louis@louis-desktop:~$ cat /proc/cpuinfo | grep "cpu MHz"

PARADOXALEMENT AVEC 1 SEULE VIDEO NOMBREUSES ERREURS
Si browny y comprend quelque chose.

NOTE: Ma version de LUCID est actuellement installée sur un disque externe USB. Mais je l'avais installée initialement sur le disque interne et le problème était le meme .

Kimble

Dernière modification par kimble (Le 15/06/2010, à 09:25)


Ordinateur: HP DC5850 UT.Processeur AMD Phenom triple core 8600B (64 Bits)
O.S: Windows XP SP3 32 Bits et Ubuntu 64 bits 10.10  (En dual boot sur 2 disques séparés.)
Portable Asus N76VZ-V2G-T1002V Windows 7/Ubuntu 12 64 bits (En dual boot sur 2 disques séparés)
LIVEBOX 2 MINi liaison Ethernet. pour le bureau Wifi pour le portable (quand je peux me connecter )

Hors ligne

#7 Le 15/06/2010, à 13:28

browny

Re : LUCID:Lecture normale des fichiers audio et/ou video impossible

Salut et de rien, on tatonne wink

On dirait que c'est pulse qui fout la m****. Est-ce que tu pourrait essayer de lire ta vidéo avec alsa et oss ?

louis@louis-desktop:~$ mplayer '/home/louis/Bureau/Trompette.avi' -vo gl -ao oss

ou

louis@louis-desktop:~$ mplayer '/home/louis/Bureau/Trompette.avi' -vo gl -ao alsa

voire carrément

louis@louis-desktop:~$ mplayer '/home/louis/Bureau/Trompette.avi' -vo gl -ao none

Dernière modification par browny (Le 15/06/2010, à 14:00)

Hors ligne

#8 Le 15/06/2010, à 16:44

kimble

Re : LUCID:Lecture normale des fichiers audio et/ou video impossible

Bonjour,
1ère commandes:

louis@louis-desktop:~$ mplayer '/home/louis/Bureau/Trompette.avi' -vo gl -ao ossMPlayer SVN-r1.0~rc3+svn20090426-4.4.3 (C) 2000-2009 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

Playing /home/louis/Bureau/Trompette.avi.
AVI file format detected.
[aviheader] Video stream found, -vid 0
[aviheader] Audio stream found, -aid 1
VIDEO:  [DIV3]  640x480  24bpp  25.000 fps  1000.7 kbps (122.2 kbyte/s)
Clip info:
 Software: Lavf52.31.0
[gl] using extended formats. Use -vo gl:nomanyfmts if playback fails.
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffdivx] vfm: ffmpeg (FFmpeg DivX ;-) (MSMPEG-4 v3))
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 44100 Hz, 2 ch, s16le, 192.0 kbit/13.61% (ratio: 24000->176400)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [oss] 44100Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 640 x 480 (preferred colorspace: Planar YV12)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.77:1 - prescaling to correct movie aspect.
[swscaler @ 0x7fa8984ba660]using unscaled yuv420p -> rgb32 special converter
VO: [gl] 640x480 => 852x480 BGRA 
A: 158.8 V: 158.8 A-V: -0.000 ct: -0.039 3971/3971  8% 21%  1.8% 56 0 

           ************************************************
           **** Your system is too SLOW to play this!  ****
           ************************************************

Possible reasons, problems, workarounds:
- Most common: broken/buggy _audio_ driver
  - Try -ao sdl or use the OSS emulation of ALSA.
  - Experiment with different values for -autosync, 30 is a good start.
- Slow video output
  - Try a different -vo driver (-vo help for a list) or try -framedrop!
- Slow CPU
  - Don't try to play a big DVD/DivX on a slow CPU! Try some of the lavdopts,
    e.g. -vfm ffmpeg -lavdopts lowres=1:fast:skiploopfilter=all.
- Broken file
  - Try various combinations of -nobps -ni -forceidx -mc 0.
- Slow media (NFS/SMB mounts, DVD, VCD etc)
  - Try -cache 8192.
- Are you using -cache to play a non-interleaved AVI file?
  - Try -nocache.
Read DOCS/HTML/en/video.html for tuning/speedup tips.
If none of this helps you, read DOCS/HTML/en/bugreports.html.

A:1008.2 V:1008.2 A-V:  0.000 ct: -0.039 25205/25205  8% 21%  1.4% 208 0 
Exiting... (Quit)
louis@louis-desktop:~$

Presque parfait (j'ai arreté à 17 minutes) sauf un petit figeage de l'image (1 fraction de seconde) à 2mn du début.
Mais toujours "Your system is too SLOW to play this!" .

2ème commandes :

louis@louis-desktop:~$ mplayer '/home/louis/Bureau/Trompette.avi' -vo gl -ao alsa
MPlayer SVN-r1.0~rc3+svn20090426-4.4.3 (C) 2000-2009 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

Playing /home/louis/Bureau/Trompette.avi.
AVI file format detected.
[aviheader] Video stream found, -vid 0
[aviheader] Audio stream found, -aid 1
VIDEO:  [DIV3]  640x480  24bpp  25.000 fps  1000.7 kbps (122.2 kbyte/s)
Clip info:
 Software: Lavf52.31.0
[gl] using extended formats. Use -vo gl:nomanyfmts if playback fails.
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffdivx] vfm: ffmpeg (FFmpeg DivX ;-) (MSMPEG-4 v3))
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 44100 Hz, 2 ch, s16le, 192.0 kbit/13.61% (ratio: 24000->176400)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [alsa] 44100Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 640 x 480 (preferred colorspace: Planar YV12)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.77:1 - prescaling to correct movie aspect.
[swscaler @ 0x7f2edb849660]using unscaled yuv420p -> rgb32 special converter
VO: [gl] 640x480 => 852x480 BGRA 
A:  30.8 V:  30.9 A-V: -0.094 ct: -0.046 773/773  9% 20%  1.0% 8 0 
Exiting... (Quit)
louis@louis-desktop:~$

Son et image s'arretent au bout  d'1 à 2 minutes.

3ème commandes :

louis@louis-desktop:~$ mplayer '/home/louis/Bureau/Trompette.avi' -vo gl -ao none
MPlayer SVN-r1.0~rc3+svn20090426-4.4.3 (C) 2000-2009 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

Playing /home/louis/Bureau/Trompette.avi.
AVI file format detected.
[aviheader] Video stream found, -vid 0
[aviheader] Audio stream found, -aid 1
VIDEO:  [DIV3]  640x480  24bpp  25.000 fps  1000.7 kbps (122.2 kbyte/s)
Clip info:
 Software: Lavf52.31.0
[gl] using extended formats. Use -vo gl:nomanyfmts if playback fails.
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffdivx] vfm: ffmpeg (FFmpeg DivX ;-) (MSMPEG-4 v3))
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 44100 Hz, 2 ch, s16le, 192.0 kbit/13.61% (ratio: 24000->176400)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
No such audio driver 'none'
Could not open/initialize audio device -> no sound.
Audio: no sound
Starting playback...
VDec: vo config request - 640 x 480 (preferred colorspace: Planar YV12)
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 1.77:1 - prescaling to correct movie aspect.
[swscaler @ 0x7f55ff5b8660]using unscaled yuv420p -> rgb32 special converter
VO: [gl] 640x480 => 852x480 BGRA 
V: 106.6 2666/2666  8% 21%  0.0% 0 0 
Exiting... (Quit)
louis@louis-desktop:~$

Pas de son image s'arrete au bout d'1 à2 mn
Kimble

Dernière modification par kimble (Le 15/06/2010, à 16:50)


Ordinateur: HP DC5850 UT.Processeur AMD Phenom triple core 8600B (64 Bits)
O.S: Windows XP SP3 32 Bits et Ubuntu 64 bits 10.10  (En dual boot sur 2 disques séparés.)
Portable Asus N76VZ-V2G-T1002V Windows 7/Ubuntu 12 64 bits (En dual boot sur 2 disques séparés)
LIVEBOX 2 MINi liaison Ethernet. pour le bureau Wifi pour le portable (quand je peux me connecter )

Hors ligne

#9 Le 21/06/2010, à 08:14

kimble

Re : LUCID:Lecture normale des fichiers audio et/ou video impossible

Bonjour,
Je fais remonter mon message car mon problème (que personne d'autre ne semble avoir) n'est toujours pas résolu.
Kimble


Ordinateur: HP DC5850 UT.Processeur AMD Phenom triple core 8600B (64 Bits)
O.S: Windows XP SP3 32 Bits et Ubuntu 64 bits 10.10  (En dual boot sur 2 disques séparés.)
Portable Asus N76VZ-V2G-T1002V Windows 7/Ubuntu 12 64 bits (En dual boot sur 2 disques séparés)
LIVEBOX 2 MINi liaison Ethernet. pour le bureau Wifi pour le portable (quand je peux me connecter )

Hors ligne

#10 Le 21/06/2010, à 12:46

kimble

Re : LUCID:Lecture normale des fichiers audio et/ou video impossible

Bonjour,
En lançant un fichier video avec la commande cvlc (qui m'a été "soufflée" par le terminal) voici ce que cela donne:

louis@louis-desktop:~$ cvlc '/home/louis/Bureau/Trompette.avi' 
VLC media player 1.0.6 Goldeneye 
[0x7fbdbc006308] dummy interface: using the dummy interface module... 
[0x2afd4c8] pulse audio output: No. of Audio Channels: 2 
[0x18e95b8] main input error: ES_OUT_SET_(GROUP_)PCR  is called too late, increasing pts_delay to 300 ms 
[0x18e95b8] main input error: ES_OUT_RESET_PCR called 
[0x18e95b8] main input error: ES_OUT_SET_(GROUP_)PCR  is called too late, increasing pts_delay to 511 ms 
[0x18e95b8] main input error: ES_OUT_RESET_PCR called

Il y a eu 2 erreurs de lecture.
Les lignes "ES_OUT_SET" etc.. sont en rouge.
Alors est-ce que ça inspire quelqu'un ?
Kimble

Dernière modification par kimble (Le 21/06/2010, à 13:01)


Ordinateur: HP DC5850 UT.Processeur AMD Phenom triple core 8600B (64 Bits)
O.S: Windows XP SP3 32 Bits et Ubuntu 64 bits 10.10  (En dual boot sur 2 disques séparés.)
Portable Asus N76VZ-V2G-T1002V Windows 7/Ubuntu 12 64 bits (En dual boot sur 2 disques séparés)
LIVEBOX 2 MINi liaison Ethernet. pour le bureau Wifi pour le portable (quand je peux me connecter )

Hors ligne

#11 Le 21/06/2010, à 16:43

angeline

Re : LUCID:Lecture normale des fichiers audio et/ou video impossible

Bonjour,
Que dit la fin de dmesg, après le boot et AVANT d'avoir essayé de lire une vidéo ou musique?
je pense à çahttp://www.archivum.info/ubuntu-bugs@li … shing.html

Dernière modification par angeline (Le 21/06/2010, à 16:45)


ıɔǝɔ ǝɯɯoɔ xnǝıɯ ʇsǝ,ɔ nʇunqnʞ

Hors ligne

#12 Le 22/06/2010, à 08:13

kimble

Re : LUCID:Lecture normale des fichiers audio et/ou video impossible

Bonjour Angeline et merci de me répondre. smile
Je suis, relativement, nouveau sous Ubuntu (novembre 2009)
Ou et à quel moment suis-je censé pouvoir lire "dmesg" ?
Je suis seul utilisateur de l'ordinateur. A l'installation j'ai donc choisi "connexion automatique" et après l'affichage du choix des différents noyaux ou de Windows j'ai seulement le splash Ubuntu puis j'arrive sur le bureau donc pas de dmesg visible sad
Kimble

Dernière modification par kimble (Le 22/06/2010, à 08:24)


Ordinateur: HP DC5850 UT.Processeur AMD Phenom triple core 8600B (64 Bits)
O.S: Windows XP SP3 32 Bits et Ubuntu 64 bits 10.10  (En dual boot sur 2 disques séparés.)
Portable Asus N76VZ-V2G-T1002V Windows 7/Ubuntu 12 64 bits (En dual boot sur 2 disques séparés)
LIVEBOX 2 MINi liaison Ethernet. pour le bureau Wifi pour le portable (quand je peux me connecter )

Hors ligne

#13 Le 22/06/2010, à 12:58

angeline

Re : LUCID:Lecture normale des fichiers audio et/ou video impossible

Une fois que (k)Ubuntu a complètement démarré, ouvre le terminal et tape dmesg.
regarde les dernières lignes pou savoir si il y a des erreurs explicites au sujet de la video et ou l'audio.


ıɔǝɔ ǝɯɯoɔ xnǝıɯ ʇsǝ,ɔ nʇunqnʞ

Hors ligne

#14 Le 22/06/2010, à 14:23

Lamba

Re : LUCID:Lecture normale des fichiers audio et/ou video impossible

je crois que j'ai le même problème que toi, par exemple les vidéos youtube plantent et ensuite continuent sans son (et moins fluides) souvent.
Sous VLC il suffit de je mette le fichier en pause et que je change de sortie audio pour que ça reprenne (long ...)

main error: ES_OUT_SET_(GROUP_)PCR  is called too late (pts_delay increased to 475 ms)
main error: ES_OUT_RESET_PCR called

Avez Totem (et Minitube) j'ai cette erreur ci :

pa_stream_writable_size() failed: Connexion terminée

J'en ai conclu que c'était bien PulseAudio qui buggait, mais vu que j'étais en période d'examen je ne m'y suis pas plus attardé que ça hmm

Hors ligne

#15 Le 22/06/2010, à 17:20

angeline

Re : LUCID:Lecture normale des fichiers audio et/ou video impossible


ıɔǝɔ ǝɯɯoɔ xnǝıɯ ʇsǝ,ɔ nʇunqnʞ

Hors ligne

#16 Le 24/06/2010, à 17:11

kimble

Re : LUCID:Lecture normale des fichiers audio et/ou video impossible

Bonjour,
Moi je ne trouve rien dans  dmesg .J'utilise les balises "code" mais c'est un copié/collé du fichier obtenu :

[    0.490776] PCI: MCFG area at f4000000 reserved in E820
[    0.491083] PCI: Using MMCONFIG at f4000000 - f7ffffff
[    0.491085] PCI: Using configuration type 1 for base access
[    0.491696] bio: create slab <bio-0> at 0
[    0.491712] ACPI: EC: Look up EC in DSDT
[    0.494000] ACPI: Interpreter enabled
[    0.494005] ACPI: (supports S0 S3 S4 S5)
[    0.494022] ACPI: Using IOAPIC for interrupt routing
[    0.500908] ACPI: No dock devices found.
[    0.501289] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.501295] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88006df2a200), AE_ALREADY_EXISTS
[    0.501302] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[    0.501320] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
[    0.501327] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.501461] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.501464] pci 0000:00:06.0: PME# disabled
[    0.501518] pci 0000:00:11.0: reg 10 io port: [0x2120-0x2127]
[    0.501525] pci 0000:00:11.0: reg 14 io port: [0x2140-0x2143]
[    0.501532] pci 0000:00:11.0: reg 18 io port: [0x2128-0x212f]
[    0.501538] pci 0000:00:11.0: reg 1c io port: [0x2144-0x2147]
[    0.501545] pci 0000:00:11.0: reg 20 io port: [0x2100-0x210f]
[    0.501552] pci 0000:00:11.0: reg 24 32bit mmio: [0xf0308000-0xf03083ff]
[    0.501569] pci 0000:00:11.0: set SATA to AHCI mode
[    0.501613] pci 0000:00:12.0: reg 10 32bit mmio: [0xf0304000-0xf0304fff]
[    0.501667] pci 0000:00:12.1: reg 10 32bit mmio: [0xf0305000-0xf0305fff]
[    0.501737] pci 0000:00:12.2: reg 10 32bit mmio: [0xf0308400-0xf03084ff]
[    0.501788] pci 0000:00:12.2: supports D1 D2
[    0.501789] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.501794] pci 0000:00:12.2: PME# disabled
[    0.501825] pci 0000:00:13.0: reg 10 32bit mmio: [0xf0306000-0xf0306fff]
[    0.501879] pci 0000:00:13.1: reg 10 32bit mmio: [0xf0307000-0xf0307fff]
[    0.501951] pci 0000:00:13.2: reg 10 32bit mmio: [0xf0308500-0xf03085ff]
[    0.502001] pci 0000:00:13.2: supports D1 D2
[    0.502003] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.502007] pci 0000:00:13.2: PME# disabled
[    0.502126] pci 0000:00:14.2: reg 10 64bit mmio: [0xf0300000-0xf0303fff]
[    0.502168] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.502172] pci 0000:00:14.2: PME# disabled
[    0.502365] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff]
[    0.502369] pci 0000:01:05.0: reg 14 io port: [0x1100-0x11ff]
[    0.502373] pci 0000:01:05.0: reg 18 32bit mmio: [0xf0100000-0xf010ffff]
[    0.502380] pci 0000:01:05.0: reg 24 32bit mmio: [0xf0000000-0xf00fffff]
[    0.502391] pci 0000:01:05.0: supports D1 D2
[    0.502432] pci 0000:00:01.0: bridge io port: [0x1000-0x1fff]
[    0.502435] pci 0000:00:01.0: bridge 32bit mmio: [0xf0000000-0xf01fffff]
[    0.502439] pci 0000:00:01.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[    0.502487] pci 0000:3f:00.0: reg 10 64bit mmio: [0xf0200000-0xf020ffff]
[    0.502542] pci 0000:3f:00.0: PME# supported from D3hot D3cold
[    0.502546] pci 0000:3f:00.0: PME# disabled
[    0.502601] pci 0000:00:06.0: bridge 32bit mmio: [0xf0200000-0xf02fffff]
[    0.502660] pci 0000:00:14.4: transparent bridge
[    0.502680] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.502836] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IGFX._PRT]
[    0.502887] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX3._PRT]
[    0.502946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[    0.503084] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS
[    0.503089] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88006df2a200), AE_ALREADY_EXISTS
[    0.503109] ACPI Warning for \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20090903/nspredef-336)
[    0.520568] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[    0.520652] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[    0.520730] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[    0.520808] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[    0.520885] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[    0.520961] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[    0.521038] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[    0.521116] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[    0.521226] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[    0.521229] vgaarb: loaded
[    0.521334] SCSI subsystem initialized
[    0.521388] libata version 3.00 loaded.
[    0.521388] usbcore: registered new interface driver usbfs
[    0.521388] usbcore: registered new interface driver hub
[    0.521388] usbcore: registered new device driver usb
[    0.521388] ACPI: WMI: Mapper loaded
[    0.521388] PCI: Using ACPI for IRQ routing
[    0.521388] NetLabel: Initializing
[    0.521388] NetLabel:  domain hash size = 128
[    0.521388] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.521388] NetLabel:  unlabeled traffic allowed by default
[    0.521388] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[    0.521388] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.522274] Switching to clocksource tsc
[    0.524188] AppArmor: AppArmor Filesystem Enabled
[    0.524188] pnp: PnP ACPI init
[    0.524188] ACPI: bus type pnp registered
[    0.524188] pnp: PnP ACPI: found 15 devices
[    0.524188] ACPI: ACPI bus type pnp unregistered
[    0.524188] system 00:0c: ioport range 0x40b-0x40b has been reserved
[    0.524188] system 00:0c: ioport range 0x4d0-0x4df has been reserved
[    0.524188] system 00:0d: ioport range 0x800-0x87f has been reserved
[    0.524188] system 00:0d: ioport range 0x880-0x88f has been reserved
[    0.524188] system 00:0d: ioport range 0xc00-0xc1f has been reserved
[    0.524188] system 00:0d: ioport range 0xc50-0xc6f has been reserved
[    0.524188] system 00:0d: ioport range 0xcd0-0xcdf has been reserved
[    0.524188] system 00:0d: ioport range 0xf800-0xf87f has been reserved
[    0.524188] system 00:0d: ioport range 0xf880-0xf8ff has been reserved
[    0.524188] system 00:0d: ioport range 0xf900-0xf97f has been reserved
[    0.524188] system 00:0d: ioport range 0xf980-0xf9ff has been reserved
[    0.524188] system 00:0d: ioport range 0xfa00-0xfa7f has been reserved
[    0.524188] system 00:0d: ioport range 0xfa80-0xfaff has been reserved
[    0.524188] system 00:0d: ioport range 0xfc00-0xfc7f has been reserved
[    0.524188] system 00:0d: ioport range 0xfd00-0xfd7f has been reserved
[    0.524188] system 00:0d: ioport range 0xfd80-0xfdff has been reserved
[    0.524188] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[    0.524188] system 00:0e: iomem range 0x100000-0x7fffffff could not be reserved
[    0.524188] system 00:0e: iomem range 0xe4000-0xfffff could not be reserved
[    0.524188] system 00:0e: iomem range 0xfec01000-0xfecfffff has been reserved
[    0.524188] system 00:0e: iomem range 0xfed00400-0xfed3ffff has been reserved
[    0.524188] system 00:0e: iomem range 0xfed45000-0xffffffff has been reserved
[    0.524188] system 00:0e: iomem range 0xf4000000-0xf7ffffff has been reserved
[    0.524188] system 00:0e: iomem range 0xd1400-0xe3fff has been reserved
[    0.528645] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.528648] pci 0000:00:01.0:   IO window: 0x1000-0x1fff
[    0.528651] pci 0000:00:01.0:   MEM window: 0xf0000000-0xf01fffff
[    0.528655] pci 0000:00:01.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
[    0.528659] pci 0000:00:06.0: PCI bridge, secondary bus 0000:3f
[    0.528660] pci 0000:00:06.0:   IO window: disabled
[    0.528663] pci 0000:00:06.0:   MEM window: 0xf0200000-0xf02fffff
[    0.528666] pci 0000:00:06.0:   PREFETCH window: disabled
[    0.528669] pci 0000:00:14.4: PCI bridge, secondary bus 0000:07
[    0.528671] pci 0000:00:14.4:   IO window: disabled
[    0.528675] pci 0000:00:14.4:   MEM window: disabled
[    0.528679] pci 0000:00:14.4:   PREFETCH window: disabled
[    0.528698]   alloc irq_desc for 18 on node 0
[    0.528700]   alloc kstat_irqs on node 0
[    0.528706] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.528709] pci 0000:00:06.0: setting latency timer to 64
[    0.528717] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.528720] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.528722] pci_bus 0000:01: resource 0 io:  [0x1000-0x1fff]
[    0.528725] pci_bus 0000:01: resource 1 mem: [0xf0000000-0xf01fffff]
[    0.528727] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[    0.528729] pci_bus 0000:3f: resource 1 mem: [0xf0200000-0xf02fffff]
[    0.528732] pci_bus 0000:07: resource 3 io:  [0x00-0xffff]
[    0.528734] pci_bus 0000:07: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.528771] NET: Registered protocol family 2
[    0.528894] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.529643] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.531815] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.532368] TCP: Hash tables configured (established 262144 bind 65536)
[    0.532371] TCP reno registered
[    0.532476] NET: Registered protocol family 1
[    0.532586] pci 0000:01:05.0: Boot video device
[    0.533024] Scanning for low memory corruption every 60 seconds
[    0.533162] audit: initializing netlink socket (disabled)
[    0.533172] type=2000 audit(1277397704.525:1): initialized
[    0.540754] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.542020] VFS: Disk quotas dquot_6.5.2
[    0.542078] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.542641] fuse init (API version 7.13)
[    0.542714] msgmni has been set to 3493
[    0.542963] alg: No test for stdrng (krng)
[    0.543011] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.543015] io scheduler noop registered
[    0.543016] io scheduler anticipatory registered
[    0.543018] io scheduler deadline registered
[    0.543053] io scheduler cfq registered (default)
[    0.543242]   alloc irq_desc for 25 on node 0
[    0.543244]   alloc kstat_irqs on node 0
[    0.543252] pcieport 0000:00:06.0: irq 25 for MSI/MSI-X
[    0.543257] pcieport 0000:00:06.0: setting latency timer to 64
[    0.543318] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.543339] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.543434] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.543442] ACPI: Power Button [PBTN]
[    0.543480] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.543482] ACPI: Power Button [PWRF]
[    0.543698] processor LNXCPU:00: registered as cooling_device0
[    0.543886] processor LNXCPU:01: registered as cooling_device1
[    0.544016] processor LNXCPU:02: registered as cooling_device2
[    0.546774] Linux agpgart interface v0.103
[    0.546806] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.546917] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.547189] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.548085] brd: module loaded
[    0.548471] loop: module loaded
[    0.548552] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.548898] Fixed MDIO Bus: probed
[    0.548925] PPP generic driver version 2.4.2
[    0.548954] tun: Universal TUN/TAP device driver, 1.6
[    0.548956] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.549017] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.549072]   alloc irq_desc for 17 on node 0
[    0.549074]   alloc kstat_irqs on node 0
[    0.549079] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.549093] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    0.549143] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    0.549172] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[    0.549185] ehci_hcd 0000:00:12.2: debug port 1
[    0.549207] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf0308400
[    0.565994] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    0.566085] usb usb1: configuration #1 chosen from 1 choice
[    0.566110] hub 1-0:1.0: USB hub found
[    0.566117] hub 1-0:1.0: 6 ports detected
[    0.566203]   alloc irq_desc for 19 on node 0
[    0.566205]   alloc kstat_irqs on node 0
[    0.566209] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.566220] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    0.566253] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    0.566275] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[    0.566287] ehci_hcd 0000:00:13.2: debug port 1
[    0.566305] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf0308500
[    0.585992] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    0.586052] usb usb2: configuration #1 chosen from 1 choice
[    0.586075] hub 2-0:1.0: USB hub found
[    0.586081] hub 2-0:1.0: 6 ports detected
[    0.586137] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.586172]   alloc irq_desc for 16 on node 0
[    0.586174]   alloc kstat_irqs on node 0
[    0.586178] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.586186] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    0.586214] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[    0.586237] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf0304000
[    0.650056] usb usb3: configuration #1 chosen from 1 choice
[    0.650079] hub 3-0:1.0: USB hub found
[    0.650087] hub 3-0:1.0: 3 ports detected
[    0.650165] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.650174] ohci_hcd 0000:00:12.1: OHCI Host Controller
[    0.650202] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[    0.650217] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf0305000
[    0.659857] Freeing initrd memory: 8137k freed
[    0.710098] usb usb4: configuration #1 chosen from 1 choice
[    0.710120] hub 4-0:1.0: USB hub found
[    0.710128] hub 4-0:1.0: 3 ports detected
[    0.710216] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.710225] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    0.710255] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    0.710282] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0306000
[    0.770099] usb usb5: configuration #1 chosen from 1 choice
[    0.770121] hub 5-0:1.0: USB hub found
[    0.770129] hub 5-0:1.0: 3 ports detected
[    0.770215] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.770224] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    0.770263] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[    0.770278] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf0307000
[    0.830099] usb usb6: configuration #1 chosen from 1 choice
[    0.830121] hub 6-0:1.0: USB hub found
[    0.830129] hub 6-0:1.0: 3 ports detected
[    0.830196] uhci_hcd: USB Universal Host Controller Interface driver
[    0.830263] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[    0.833346] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.833352] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.833450] mice: PS/2 mouse device common for all mice
[    0.833552] rtc_cmos 00:03: RTC can wake from S4
[    0.833591] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.833615] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.833762] device-mapper: uevent: version 1.0.3
[    0.833864] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.833959] device-mapper: multipath: version 1.1.0 loaded
[    0.833962] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.834168] cpuidle: using governor ladder
[    0.834170] cpuidle: using governor menu
[    0.834514] TCP cubic registered
[    0.834631] NET: Registered protocol family 10
[    0.835072] lo: Disabled Privacy Extensions
[    0.835340] NET: Registered protocol family 17
[    0.835377] powernow-k8: Found 1 AMD Phenom(tm) 8600B Triple-Core Processor processors (3 cpu cores) (version 2.20.00)
[    0.835413] powernow-k8:    0 : pstate 0 (2300 MHz)
[    0.835415] powernow-k8:    1 : pstate 1 (1150 MHz)
[    0.835680] PM: Resume from disk failed.
[    0.835700] registered taskstats version 1
[    0.835955]   Magic number: 14:632:692
[    0.836084] rtc_cmos 00:03: setting system clock to 2010-06-24 16:41:45 UTC (1277397705)
[    0.836088] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.836089] EDD information not available.
[    0.836142] Freeing unused kernel memory: 876k freed
[    0.836481] Write protecting the kernel read-only data: 7680k
[    0.852216] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.873125] udev: starting version 151
[    0.933103] tg3.c:v3.102 (September 1, 2009)
[    0.933126] tg3 0000:3f:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    0.933135] tg3 0000:3f:00.0: setting latency timer to 64
[    0.933311] ahci 0000:00:11.0: version 3.0
[    0.933324]   alloc irq_desc for 22 on node 0
[    0.933326]   alloc kstat_irqs on node 0
[    0.933334] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.933437] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    0.933441] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pio ccc 
[    0.935482] scsi0 : ahci
[    0.938755] scsi1 : ahci
[    0.951977] scsi2 : ahci
[    0.958383] scsi3 : ahci
[    0.958535] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22
[    0.958539] ata2: SATA max UDMA/133 abar m1024@0xf0308000 port 0xf0308180 irq 22
[    0.958543] ata3: SATA max UDMA/133 abar m1024@0xf0308000 port 0xf0308200 irq 22
[    0.958546] ata4: SATA max UDMA/133 abar m1024@0xf0308000 port 0xf0308280 irq 22
[    0.970928] eth0: Tigon3 [partno(BCM95754) rev b002] (PCI Express) MAC address 00:21:85:00:2c:cb
[    0.970933] eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[    0.970936] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    0.970937] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    0.978296] FDC 0 is a post-1991 82077
[    1.016108] usb 2-2: new high speed USB device using ehci_hcd and address 2
[    1.184842] usb 2-2: configuration #1 chosen from 1 choice
[    1.192343] Initializing USB Mass Storage driver...
[    1.192472] scsi4 : SCSI emulation for USB Mass Storage devices
[    1.192552] usb-storage: device found at 2
[    1.192556] usb-storage: waiting for device to settle before scanning
[    1.192567] usbcore: registered new interface driver usb-storage
[    1.192570] USB Mass Storage support registered.
[    1.320122] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.320155] ata4: SATA link down (SStatus 0 SControl 300)
[    1.320190] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.321100] ata3.00: ATA-8: WDC WD5000AAKS-60A7B0, 02.03B02, max UDMA/100
[    1.321103] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.322166] ata3.00: configured for UDMA/100
[    1.322399] ata2.00: ATAPI: TSSTcorp CDDVDW TS-H653N, HB02, max UDMA/100
[    1.324983] ata2.00: configured for UDMA/100
[    1.720109] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.721317] ata1.00: ATA-8: ST31000528AS, CC37, max UDMA/133
[    1.721320] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.722738] ata1.00: configured for UDMA/133
[    1.722894] scsi 0:0:0:0: Direct-Access     ATA      ST31000528AS     CC37 PQ: 0 ANSI: 5
[    1.723077] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.723121] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.723207] sd 0:0:0:0: [sda] Write Protect is off
[    1.723210] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.723227] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.723373]  sda:
[    1.723911] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-H653N  HB02 PQ: 0 ANSI: 5
[    1.728125] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.728130] Uniform CD-ROM driver Revision: 3.20
[    1.728284] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.728352] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.728471] scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AAKS-6 02.0 PQ: 0 ANSI: 5
[    1.728626] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    1.728655] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.728759] sd 2:0:0:0: [sdb] Write Protect is off
[    1.728762] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.728780] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.728881]  sdb: sdb1
[    1.733729] sd 2:0:0:0: [sdb] Attached SCSI disk
[    1.745979]  sda1 sda2 < sda5 sda6 sda7 > sda3
[    1.768305] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.185834] EXT4-fs (sda3): mounted filesystem with ordered data mode
[    4.630081] hub 4-0:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
[    6.192734] usb-storage: device scan complete
[    6.199350] scsi 4:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[    7.165769] scsi 4:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[    7.172507] scsi 4:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[    7.179255] scsi 4:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[    7.179627] sd 4:0:0:0: Attached scsi generic sg3 type 0
[    7.179746] sd 4:0:0:1: Attached scsi generic sg4 type 0
[    7.179848] sd 4:0:0:2: Attached scsi generic sg5 type 0
[    7.179945] sd 4:0:0:3: Attached scsi generic sg6 type 0
[    7.184877] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[    7.185765] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[    7.187317] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[    7.187335] sd 4:0:0:2: [sde] Attached SCSI removable disk
[    7.263257] Adding 4881400k swap on /dev/sda6.  Priority:-1 extents:1 across:4881400k 
[    7.272333] udev: starting version 151
[    7.324175] lp: driver loaded but no devices found
[    7.346116] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xfc00, revision 0
[    7.346237] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    7.387194] EDAC MC: Ver: 2.1.0 Jun  3 2010
[    7.439835] tpm_inf_pnp 00:0a: Found TPM with ID IFX0102
[    7.439889] tpm_inf_pnp 00:0a: TPM found: config base 0x4e, data base 0x480, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[    7.442853] EDAC amd64_edac:  Ver: 3.2.0 Jun  3 2010
[    7.444278] vga16fb: initializing
[    7.444282] vga16fb: mapped to 0xffff8800000a0000
[    7.444348] fb0: VGA16 VGA frame buffer device
[    7.468582] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    7.468589] Disabling lock debugging due to kernel taint
[    7.515020] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[    7.515035] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[    7.515036]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[    7.515037]  (Note that use of the override may cause unknown side effects.)
[    7.515081] amd64_edac: probe of 0000:00:18.2 failed with error -22
[    7.541523] type=1505 audit(1277390512.203:2):  operation="profile_load" pid=621 name="/sbin/dhclient3"
[    7.541767] type=1505 audit(1277390512.203:3):  operation="profile_load" pid=621 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[    7.541903] type=1505 audit(1277390512.203:4):  operation="profile_load" pid=621 name="/usr/lib/connman/scripts/dhclient-script"
[    7.562036] [fglrx] Maximum main memory to use for locked dma buffers: 1640 MBytes.
[    7.562061] [fglrx]   vendor: 1002 device: 9611 count: 1
[    7.562317] [fglrx] ioport: bar 1, base 0x1100, size: 0x100
[    7.562334] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    7.562339] pci 0000:01:05.0: setting latency timer to 64
[    7.562613] [fglrx] Kernel PAT support is enabled
[    7.562639] [fglrx] module loaded - fglrx 8.72.11 [Apr  8 2010] with 1 minors
[    7.669179] Console: switching to colour frame buffer device 80x30
[    7.675460] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.861284] hub 4-0:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
[    8.117602] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input4
[    8.123060] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    8.250291] input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[    8.293502] EXT4-fs (sda7): mounted filesystem with ordered data mode
[    8.530309]   alloc irq_desc for 26 on node 0
[    8.530313]   alloc kstat_irqs on node 0
[    8.530328] tg3 0000:3f:00.0: irq 26 for MSI/MSI-X
[    8.543722] type=1505 audit(1277390513.203:5):  operation="profile_load" pid=927 name="/usr/share/gdm/guest-session/Xsession"
[    8.545639] type=1505 audit(1277390513.203:6):  operation="profile_replace" pid=928 name="/sbin/dhclient3"
[    8.545892] type=1505 audit(1277390513.203:7):  operation="profile_replace" pid=928 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[    8.546035] type=1505 audit(1277390513.203:8):  operation="profile_replace" pid=928 name="/usr/lib/connman/scripts/dhclient-script"
[    8.549588] type=1505 audit(1277390513.203:9):  operation="profile_load" pid=930 name="/usr/bin/evince"
[    8.552882] type=1505 audit(1277390513.213:10):  operation="profile_load" pid=930 name="/usr/bin/evince-previewer"
[    8.554792] type=1505 audit(1277390513.213:11):  operation="profile_load" pid=930 name="/usr/bin/evince-thumbnailer"
[    8.580477] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    8.756393] ppdev: user-space parallel port driver
[    8.859596] [fglrx] GART Table is not in FRAME_BUFFER range 
[    8.859854]   alloc irq_desc for 27 on node 0
[    8.859857]   alloc kstat_irqs on node 0
[    8.859868] fglrx_pci 0000:01:05.0: irq 27 for MSI/MSI-X
[    8.860617] [fglrx] Firegl kernel thread PID: 1076
[    8.860979] [fglrx] IRQ 27 Enabled
[    9.262243] [fglrx] Gart USWC size:547 M.
[    9.262247] [fglrx] Gart cacheable size:215 M.
[    9.262252] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
[    9.262255] [fglrx] Reserved FB block: Unshared offset:fffc000, size:4000 
[   10.147959] tg3: eth0: Link is up at 100 Mbps, full duplex.
[   10.147963] tg3: eth0: Flow control is off for TX and off for RX.
[   10.148337] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   11.140081] hub 4-0:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
[   14.370056] hub 4-0:1.0: Cannot enable port 3.  Maybe the USB cable is bad?
[   14.370069] hub 4-0:1.0: unable to enumerate USB device on port 3
[   14.580715] CPU0 attaching NULL sched-domain.
[   14.580723] CPU1 attaching NULL sched-domain.
[   14.580725] CPU2 attaching NULL sched-domain.
[   14.640516] CPU0 attaching sched-domain:
[   14.640522]  domain 0: span 0-2 level MC
[   14.640524]   groups: 0 1 2
[   14.640532] CPU1 attaching sched-domain:
[   14.640533]  domain 0: span 0-2 level MC
[   14.640535]   groups: 1 2 0
[   14.640539] CPU2 attaching sched-domain:
[   14.640541]  domain 0: span 0-2 level MC
[   14.640542]   groups: 2 0 1
[   20.351048] eth0: no IPv6 routers present
[ 3193.903899] __ratelimit: 9 callbacks suppressed
[ 3193.903909] npviewer.bin[1578]: segfault at 418 ip 00000000f609fa56 sp 00000000ff9b9b08 error 6 in libflashplayer.so[f5e51000+b04000]
[ 3574.080810] npviewer.bin[1858]: segfault at 0 ip 00000000f6246041 sp 00000000fff6a440 error 4 in libflashplayer.so[f5ea7000+b04000]
[ 3733.642136] npviewer.bin[1897]: segfault at 418 ip 00000000f610da56 sp 00000000ff889b38 error 6 in libflashplayer.so[f5ebf000+b04000]
[ 4544.352374] npviewer.bin[1921]: segfault at 0 ip 00000000f624e041 sp 00000000ffe0f4e0 error 4 in libflashplayer.so[f5eaf000+b04000]
louis@louis-desktop:~$

Et le lien donné par Angéline ne m'inspire pas davantage. Mais il faur que je précise que mes connaissances en anglais sont nulles et meme plus que nulles.
Kimble

Dernière modification par kimble (Le 24/06/2010, à 17:13)


Ordinateur: HP DC5850 UT.Processeur AMD Phenom triple core 8600B (64 Bits)
O.S: Windows XP SP3 32 Bits et Ubuntu 64 bits 10.10  (En dual boot sur 2 disques séparés.)
Portable Asus N76VZ-V2G-T1002V Windows 7/Ubuntu 12 64 bits (En dual boot sur 2 disques séparés)
LIVEBOX 2 MINi liaison Ethernet. pour le bureau Wifi pour le portable (quand je peux me connecter )

Hors ligne

#17 Le 24/06/2010, à 17:21

angeline

Re : LUCID:Lecture normale des fichiers audio et/ou video impossible

Voudrais tu lire des vidéos en flash ???
si oui il y a un petit pb.

[ 3193.903909] npviewer.bin[1578]: segfault at 418 ip 00000000f609fa56 sp 00000000ff9b9b08 error 6 in libflashplayer.so[f5e51000+b04000]
[ 3574.080810] npviewer.bin[1858]: segfault at 0 ip 00000000f6246041 sp 00000000fff6a440 error 4 in libflashplayer.so[f5ea7000+b04000]
[ 3733.642136] npviewer.bin[1897]: segfault at 418 ip 00000000f610da56 sp 00000000ff889b38 error 6 in libflashplayer.so[f5ebf000+b04000]
[ 4544.352374] npviewer.bin[1921]: segfault at 0 ip 00000000f624e041 sp 00000000ffe0f4e0 error 4 in libflashplayer.so[f5eaf000+b04000]
louis@louis-desktop:~$

ıɔǝɔ ǝɯɯoɔ xnǝıɯ ʇsǝ,ɔ nʇunqnʞ

Hors ligne

#18 Le 25/06/2010, à 12:00

kimble

Re : LUCID:Lecture normale des fichiers audio et/ou video impossible

Bonjour Angeline,
Je peux sans problème et sans erreur visionner une video sur you tube ,arte7 etc... (j'ai installé "flashPugin)
C'est quand je veux visionner un fichier sauvegardé sur mon DD que le problème se pose.
D'autre part comme je l'ai décris plus haut:
Si je lance la lecture d'un site de video puis la lecture d'un fichier video de mon DD et affichés ensemble (en mosaique) il n'y a aucune erreur de lecture ni sur l'un ni sur l'autre. Mais dès que je quitte le site internet la lecture de mon fichier sauvegardé recommence à déc...ner.
C'est vraiment une histoire de fou.:P
Kimble

Dernière modification par kimble (Le 25/06/2010, à 12:04)


Ordinateur: HP DC5850 UT.Processeur AMD Phenom triple core 8600B (64 Bits)
O.S: Windows XP SP3 32 Bits et Ubuntu 64 bits 10.10  (En dual boot sur 2 disques séparés.)
Portable Asus N76VZ-V2G-T1002V Windows 7/Ubuntu 12 64 bits (En dual boot sur 2 disques séparés)
LIVEBOX 2 MINi liaison Ethernet. pour le bureau Wifi pour le portable (quand je peux me connecter )

Hors ligne

#19 Le 25/06/2010, à 15:29

angeline

Re : LUCID:Lecture normale des fichiers audio et/ou video impossible

Bonjour,
Oui, de quoi s'arracher les cheveux, mais comme je n'en ai plus beaucoup, je persiste sur Ubuntu !!!
Les 4 dernières lignes de ton "dmesg" ne sont quand même pas sympathiques.
Tu ne risque rien à purger et ré-installer la librairie fautive (libflashplayer).
Plus ça va moins je pense que l'informatique est une science binaire!!!!
Bon courage.


ıɔǝɔ ǝɯɯoɔ xnǝıɯ ʇsǝ,ɔ nʇunqnʞ

Hors ligne

#20 Le 25/06/2010, à 16:54

kimble

Re : LUCID:Lecture normale des fichiers audio et/ou video impossible

Bonjour,
C'est ce que j'avais deja fait en utilisant une partie du script de la DOC (la partie suppression):

http://doc.ubuntu-fr.org/flashplayer#in … utomatique

ça supprime toute les version du plugins ainsi que libflashsupport et nspluginwrapper.
La librairie libflashplayer.so disparait.
J'ai ensuite réinstallé le plugins avec synaptic qui réintalle nspluginwrapper dans les dépendances et la librairie.
Mais... rien à faire ça ne marche toujours pas. GRRR !

Je vais peut-etre rechercher pourquoi Ubuntu ne semble pas reconnaitre la vitesse de mon processeur.
En effet la commande:

cat /proc/cpuinfo | grep "cpu MHz"

Me renvoie des valeurs curieuses:

louis@louis-desktop:~$ cat /proc/cpuinfo | grep "cpu MHz"
cpu MHz		: 1150.000
cpu MHz		: 1150.000
cpu MHz		: 1150.000
louis@louis-desktop:~$

Alors que mon processeur est censé "tourner" à 2,3 ghz (reconnu sous windows)
Lors de mes nombreuses manipulations j'ai récupéré une erreur du style "Your system is too slow"
Là j'ai beau ne pas comprendre l'anglais j'ai pigé.
"Too slow" Eh oh !! UBUNTU ! on se calme. C'est quand meme pas un I386 mon processeur.
Kimble

Dernière modification par kimble (Le 25/06/2010, à 17:00)


Ordinateur: HP DC5850 UT.Processeur AMD Phenom triple core 8600B (64 Bits)
O.S: Windows XP SP3 32 Bits et Ubuntu 64 bits 10.10  (En dual boot sur 2 disques séparés.)
Portable Asus N76VZ-V2G-T1002V Windows 7/Ubuntu 12 64 bits (En dual boot sur 2 disques séparés)
LIVEBOX 2 MINi liaison Ethernet. pour le bureau Wifi pour le portable (quand je peux me connecter )

Hors ligne

#21 Le 26/06/2010, à 11:19

kimble

Re : LUCID:Lecture normale des fichiers audio et/ou video impossible

Bonjour,
Bon pour mes problèmes de lecture audio/video j'ai peut-etre trouvé la solution (j'espère que cela va durer) :
Désinstaller PULSEAUDIO qui semble extrèmement buggé (du moins a une incompatibilité avec ma config) .
Pour le moment j'ai récupéré une lecture correcte de mes fichiers. wink
Inconvénient : plus de règlage du son dans le "tableau de bord" .
Je vais ouvrir un nouveau post pour savoir si une application ALSA permet cela.
J'espère que d'autres applications ne refuseront pas de fonctionner du fait de l'absence de Pulseaudio.
MERCI à tous ceux qui m'ont aidé.
Kimble

Dernière modification par kimble (Le 26/06/2010, à 11:49)


Ordinateur: HP DC5850 UT.Processeur AMD Phenom triple core 8600B (64 Bits)
O.S: Windows XP SP3 32 Bits et Ubuntu 64 bits 10.10  (En dual boot sur 2 disques séparés.)
Portable Asus N76VZ-V2G-T1002V Windows 7/Ubuntu 12 64 bits (En dual boot sur 2 disques séparés)
LIVEBOX 2 MINi liaison Ethernet. pour le bureau Wifi pour le portable (quand je peux me connecter )

Hors ligne