Contenu | Rechercher | Menus

Annonce

Si vous avez des soucis pour rester connecté, déconnectez-vous puis reconnectez-vous depuis ce lien en cochant la case
Me connecter automatiquement lors de mes prochaines visites.

À propos de l'équipe du forum.

#1 Le 08/05/2010, à 17:57

Rudy85

[Résolu] Impossibilité d'acceder à mes dossiers partagés

Bonjour ,

J'ai un problème avec samba , j'arrive à partager mes dossiers (ils sont visible dans réseau)
mais si je veux les ouvrir, j'obtiens 2 erreurs selon la situation :

Soit on me demande un mot de passe que je n'ai pas hmm
           sudo smbpasswd -a rudy ne change rien au problème

Si j'utilise system-config-samba avec le partage sans restrictions ouvert à tous le monde , j'ai le droit à
           Impossible de monter le partage Windows

J'ai bien besoin d'aide.
J'ai pensé à choisir security=share

Avant je n'avais pas ces difficultés (j'utilise ubuntu depuis feisty)

Dernière modification par Rudy85 (Le 27/06/2010, à 17:19)


Bientôt supertuxkart 0.7 :
Animation des personnages durant la course
Nouveau moteur graphique
Peut être le jeu online ................................toute aide est la bienvenue

Hors ligne

#2 Le 09/05/2010, à 05:37

Rudy85

Re : [Résolu] Impossibilité d'acceder à mes dossiers partagés

sudo smbtree m'affiche ce message :

Server requested LANMAN password (share-level security) but 'client lanman auth' is disabled
failed tcon_X with NT_STATUS_ACCESS_DENIED
Server requested LANMAN password (share-level security) but 'client lanman auth' is disabled
failed tcon_X with NT_STATUS_ACCESS_DENIED

Je pens que ça a un rapport hmm

Voici mon smb.conf :

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Some options that are often worth tuning have been included as
# commented-out examples in this file.
#  - When such options are commented with ";", the proposed setting
#    differs from the default Samba behaviour
#  - When commented with "#", the proposed setting is the default
#    behaviour of Samba but the option is considered important
#    enough to be mentioned here
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 
# A well-established practice is to name the original file
# "smb.conf.master" and create the "real" config file with
# testparm -s smb.conf.master >smb.conf
# This minimizes the size of the really used smb.conf file
# which, according to the Samba Team, impacts performance
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
	workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
	server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
#   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
	dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
	log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
	max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
	syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
	panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
	security = share

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
	encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
;	passdb backend = tdbsam

	obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
	unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
	passwd program = /usr/bin/passwd %u
	passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
;	pam password change = no

# This option controls how unsuccessful authentication attempts are mapped 
# to anonymous connections
	map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;	printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
#   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;	usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
	usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares.  This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.  Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes
;   share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
	comment = All Printers
	browseable = no
	path = /var/spool/samba
	printable = yes
;	guest ok = no
;	read only = yes
	create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
	comment = Printer Drivers
	path = /var/lib/samba/printers
;	browseable = yes
;	read only = yes
;	guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# Replace 'ntadmin' with the name of the group your admin users are
# members of.
;   write list = root, @ntadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#	cdrom share is accesed. For this to work /etc/fstab must contain
#	an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#	is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

[Musique]
	path = /media/DOCUMENTS/Musique
;	writeable = no
;	browseable = yes
	guest ok = yes

Bientôt supertuxkart 0.7 :
Animation des personnages durant la course
Nouveau moteur graphique
Peut être le jeu online ................................toute aide est la bienvenue

Hors ligne

#3 Le 09/05/2010, à 05:38

Rudy85

Re : [Résolu] Impossibilité d'acceder à mes dossiers partagés

J'ai décomenté(#:/] la ligne security=share mais ce n'est pas ça non plus

J'ai trouvé cette page en rapport , mais je ne comprends pas la conclusion
http://realtechtalk.com/Samba_SMB_Error … 0-articles

Dernière modification par Rudy85 (Le 09/05/2010, à 05:41)


Bientôt supertuxkart 0.7 :
Animation des personnages durant la course
Nouveau moteur graphique
Peut être le jeu online ................................toute aide est la bienvenue

Hors ligne

#4 Le 09/05/2010, à 23:55

AlexandreP

Re : [Résolu] Impossibilité d'acceder à mes dossiers partagés

Rudy85 a écrit :

Soit on me demande un mot de passe que je n'ai pas hmm
           sudo smbpasswd -a rudy ne change rien au problème

Dans la configuration par défaut (fournie par Ubuntu ; je ne sais pas si c'est le même cas pour les autres distributions GNU/Linux), les comptes d'utilisateur et mots de passe des comptes sont automatiquement synchronisés entre Ubuntu et Samba. Un compte d'utilisateur sous Ubuntu est aussi un utilisateur de Samba, et son mot de passe est aussi celui qu'il utilise pour une connexion par Samba.


Rudy85 a écrit :

Server requested LANMAN password (share-level security) but 'client lanman auth' is disabled
failed tcon_X with NT_STATUS_ACCESS_DENIED
Server requested LANMAN password (share-level security) but 'client lanman auth' is disabled
failed tcon_X with NT_STATUS_ACCESS_DENIED

Dans la section [global], ajoute les deux options suivantes :

client lanman auth = yes 
lanman auth = yes

«La capacité d'apprendre est un don; La faculté d'apprendre est un talent; La volonté d'apprendre est un choix.» -Frank Herbert
93,8% des gens sont capables d'inventer des statistiques sans fournir d'études à l'appui.

Hors ligne

#5 Le 10/05/2010, à 17:16

Rudy85

Re : [Résolu] Impossibilité d'acceder à mes dossiers partagés

C'est mieux : smbtree fonctionne ! mais ça ne résout aucun problème sad

WORKGROUP
	\\RUDY-LAPTOP    		rudy-laptop server (Samba, Ubuntu)
		\\RUDY-LAPTOP\video          	
		\\RUDY-LAPTOP\print$         	Printer Drivers
		\\RUDY-LAPTOP\Musique        	
		\\RUDY-LAPTOP\IPC$           	IPC Service (rudy-laptop server (Samba, Ubuntu))

Je n'ai aucune idée  comment déverrouiller la fenêtre qui me permettrait de monter ces dossiers partagés


Bientôt supertuxkart 0.7 :
Animation des personnages durant la course
Nouveau moteur graphique
Peut être le jeu online ................................toute aide est la bienvenue

Hors ligne

#6 Le 11/05/2010, à 00:10

AlexandreP

Re : [Résolu] Impossibilité d'acceder à mes dossiers partagés

Vérifie que les droits Unix sur les dossiers que tu partages sont suffisants pour permettre à des utilisateurs (authentifiés ou non authentifiés) d'accéder au dossier. J'en parlais voici quelques minutes à Sunkart : http://forum.ubuntu-fr.org/viewtopic.php?pid=3468405#p3468405


«La capacité d'apprendre est un don; La faculté d'apprendre est un talent; La volonté d'apprendre est un choix.» -Frank Herbert
93,8% des gens sont capables d'inventer des statistiques sans fournir d'études à l'appui.

Hors ligne

#7 Le 11/05/2010, à 17:56

Rudy85

Re : [Résolu] Impossibilité d'acceder à mes dossiers partagés

J'ai fait un sudo chmod -R a+rwx /media/DOCUMENTS/Video
et un sudo chmod 777 /media/DOCUMENTS/Videovoyant que la première commande n'a pas fonctionné

Peux tu me dire si ton partage samba marche chez toi avec ubuntu 10.04 ? Auquel cas , peux tu m'envoyer ton smb.conf STP ?

Dernière modification par Rudy85 (Le 11/05/2010, à 18:07)


Bientôt supertuxkart 0.7 :
Animation des personnages durant la course
Nouveau moteur graphique
Peut être le jeu online ................................toute aide est la bienvenue

Hors ligne

#8 Le 11/05/2010, à 18:06

Rudy85

Re : [Résolu] Impossibilité d'acceder à mes dossiers partagés

Mon fstab :

# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>

proc	/proc	proc	defaults	0	0
#Entry for /dev/sda1 :
UUID=7dc73e22-6dcf-4d76-b4e0-dc139155f9ca	/	ext3	relatime,errors=remount-ro	0	1
#Entry for /dev/sda4 :
UUID=490C-AFB6	/media/DOCUMENTS	vfat	defaults,nosuid,nodev,uhelper=hal,shortname=mixed,uid=1000,utf8,umask=077,flush	0	2
#Entry for /dev/sda5 :
UUID=80b0e20f-8ff9-4910-a474-a8022d1b45c5	none	swap	sw	0	0
/dev/scd0	/media/cdrom0	udf,iso9660	user,noauto,exec,utf8	0	0

sudo fdisk -l

Disque /dev/sda: 120.0 Go, 120034123776 octets
255 têtes, 63 secteurs/piste, 14593 cylindres
Unités = cylindres de 16065 * 512 = 8225280 octets
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identifiant de disque : 0x039ea198

Périphérique Amorce  Début        Fin      Blocs     Id  Système
/dev/sda1               1        3526    28322563+  83  Linux
/dev/sda2            3527        3648      979965    5  Etendue
/dev/sda3   *        3649        7417    30274492+   c  W95 FAT32 (LBA)
/dev/sda4            7418       14593    57641220    b  W95 FAT32
/dev/sda5            3527        3648      979933+  82  Linux swap / Solaris

Merci de ton aide


Bientôt supertuxkart 0.7 :
Animation des personnages durant la course
Nouveau moteur graphique
Peut être le jeu online ................................toute aide est la bienvenue

Hors ligne

#9 Le 12/05/2010, à 02:49

AlexandreP

Re : [Résolu] Impossibilité d'acceder à mes dossiers partagés

Déjà, tout comme Sunkart, les droits Unix sur le dossier que tu souhaites partager sont insuffisants pour autoriser les connexions autres que celles établies par ton propre compte d'utilisateur.

# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>

proc    /proc    proc    defaults    0    0
#Entry for /dev/sda1 :
UUID=7dc73e22-6dcf-4d76-b4e0-dc139155f9ca    /    ext3    relatime,errors=remount-ro    0    1
#Entry for /dev/sda4 :
UUID=490C-AFB6    /media/DOCUMENTS    vfat    defaults,nosuid,nodev,uhelper=hal,shortname=mixed,uid=1000,utf8,umask=000,flush    0    2
#Entry for /dev/sda5 :
UUID=80b0e20f-8ff9-4910-a474-a8022d1b45c5    none    swap    sw    0    0
/dev/scd0    /media/cdrom0    udf,iso9660    user,noauto,exec,utf8    0    0


«La capacité d'apprendre est un don; La faculté d'apprendre est un talent; La volonté d'apprendre est un choix.» -Frank Herbert
93,8% des gens sont capables d'inventer des statistiques sans fournir d'études à l'appui.

Hors ligne

#10 Le 12/05/2010, à 07:14

figaro

Re : [Résolu] Impossibilité d'acceder à mes dossiers partagés

Ubuntu sous prétexte d'automatiser a complétement bouleversé le fonctionnement de Samba ----> résultat rien ne fonctionne. sad

Je préconise encore et toujours de revenir à une configuration basique telle qu'expliquée en long et en large dans mes tutos.

Nota: D'autre part retenez que jamais Samba ne pourra outrepasser les droits Unix sur les dossiers, mais que les droits Samba peuvent les réduire.


Le blog de figaro (astuces diverses et tutos Samba pour débutants)
Le blog de cep (astuces Linux avancées)
Debian Lenny 6.0.1, Ubuntu 10.04.2, Ubuntu Remix 9.10, Ubuntu Netbook 10.04

Hors ligne

#11 Le 13/05/2010, à 17:57

sethnesta

Re : [Résolu] Impossibilité d'acceder à mes dossiers partagés

Bon ben moi perso j'essai d'accéder à un partage Windows 7 64bits à partir d'un Ubuntu 10.04 64bits et effectivement, rien de fonctionne !

J'ai franchement tout essayé mais rien n'y fait, j'ai le droit à des demandes de mot de passe répété (en interface graphique) et à des messages du genre "session setup failed: SUCCESS - 0" en ligne de commande ... pfffffff

Si quelqu'un se trouve dans la même situation (10.04 vers Win7) et que ça marche, je suis intéressé !!!


Ceci est la fin de mon post. Bonne journée !

Hors ligne

#12 Le 13/05/2010, à 21:18

sethnesta

Re : [Résolu] Impossibilité d'acceder à mes dossiers partagés

Oyé, bon perso mon problème est résolu, pour ce que ça peut aider, c'est ici :

http://forum.ubuntu-fr.org/viewtopic.php?pid=3475713#p3475713

wink


Ceci est la fin de mon post. Bonne journée !

Hors ligne

#13 Le 27/06/2010, à 17:18

Rudy85

Re : [Résolu] Impossibilité d'acceder à mes dossiers partagés

J'ai trouvé ou été mon problème smile :

testparm

wooshi : "Cette dernière vérifie la syntaxe de votre fichier mais ne garantie pas le fonctionnement du serveur."

"Avant d'accéder à une ressource et afin de vérifier que vos répertoires sont correctements partagés, vous pouvez utiliser la commande smbclient ...  L'option -L vous permet de spécifier l'hôte en renseignant son adresse IP. Dans notre cas, nous utilisons l'adresse 127.0.0.1 qui correspond à l'adresse de loopback puisque nous sommes toujours sur le serveur. A vous d'adapter en fonction du poste sur lequel vous êtes.

Pour connaître l'adresse ip du serveur, vous pouvez utiliser la commande ifconfig  "

J'ai eu erreur :

Server requested plaintext password but 'client use plaintext auth' is disabled

Il m'as fallu ajouter :

client plaintext auth = yes

A la fin de le section "Global settings" de mon smb.conf
-------------------------------------------------------------------------------------------------------------------------

Donc Merci pour les sources et les directions apportées , mais : quelle galère !


Bientôt supertuxkart 0.7 :
Animation des personnages durant la course
Nouveau moteur graphique
Peut être le jeu online ................................toute aide est la bienvenue

Hors ligne

#14 Le 27/06/2010, à 19:36

Rudy85

Re : [Résolu] Impossibilité d'acceder à mes dossiers partagés

Note pour moi même :

Pour désactiver définitivement le mot de passe pour se connecter , configurer les partages de la sorte :

[JEUX]
path = /media/JEUX
available = yes
guest ok = yes
read only = no
browsable = yes
public = yes
writable = no
create mask = 000

Ne plus faire sudo smbpasswd -a
pour ne pas ajouter l'utilisateur root et retourne une erreur :
« net usershare » a retourné l'erreur 255 : net usershare add: cannot convert name "Everyone"

dans ces cas là supprime-le en faisant

sudo smbpasswd -x

Dernière modification par Rudy85 (Le 27/06/2010, à 19:40)


Bientôt supertuxkart 0.7 :
Animation des personnages durant la course
Nouveau moteur graphique
Peut être le jeu online ................................toute aide est la bienvenue

Hors ligne